468 lines
11 KiB
C
468 lines
11 KiB
C
|
/*
|
||
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
||
|
|
* License. See the file "COPYING" in the main directory of this archive
|
||
|
|
* for more details.
|
||
|
|
*
|
||
|
|
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/types.h>
|
||
|
|
#include <linux/pci.h>
|
||
|
|
#include <linux/kernel.h>
|
||
|
|
#include <linux/init.h>
|
||
|
|
#include <linux/delay.h>
|
||
|
|
#include <linux/io.h>
|
||
|
|
|
||
|
|
#include "pci-bcm63xx.h"
|
||
|
|
|
||
|
|
/*
|
||
|
|
* swizzle 32bits data to return only the needed part
|
||
|
|
*/
|
||
|
|
static int postprocess_read(u32 data, int where, unsigned int size)
|
||
|
|
{
|
||
|
|
u32 ret;
|
||
|
|
|
||
|
|
ret = 0;
|
||
|
|
switch (size) {
|
||
|
|
case 1:
|
||
|
|
ret = (data >> ((where & 3) << 3)) & 0xff;
|
||
|
|
break;
|
||
|
|
case 2:
|
||
|
|
ret = (data >> ((where & 3) << 3)) & 0xffff;
|
||
|
|
break;
|
||
|
|
case 4:
|
||
|
|
ret = data;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int preprocess_write(u32 orig_data, u32 val, int where,
|
||
|
|
unsigned int size)
|
||
|
|
{
|
||
|
|
u32 ret;
|
||
|
|
|
||
|
|
ret = 0;
|
||
|
|
switch (size) {
|
||
|
|
case 1:
|
||
|
|
ret = (orig_data & ~(0xff << ((where & 3) << 3))) |
|
||
|
|
(val << ((where & 3) << 3));
|
||
|
|
break;
|
||
|
|
case 2:
|
||
|
|
ret = (orig_data & ~(0xffff << ((where & 3) << 3))) |
|
||
|
|
(val << ((where & 3) << 3));
|
||
|
|
break;
|
||
|
|
case 4:
|
||
|
|
ret = val;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
return ret;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* setup hardware for a configuration cycle with given parameters
|
||
|
|
*/
|
||
|
|
static int bcm63xx_setup_cfg_access(int type, unsigned int busn,
|
||
|
|
unsigned int devfn, int where)
|
||
|
|
{
|
||
|
|
unsigned int slot, func, reg;
|
||
|
|
u32 val;
|
||
|
|
|
||
|
|
slot = PCI_SLOT(devfn);
|
||
|
|
func = PCI_FUNC(devfn);
|
||
|
|
reg = where >> 2;
|
||
|
|
|
||
|
|
/* sanity check */
|
||
|
|
if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT))
|
||
|
|
return 1;
|
||
|
|
|
||
|
|
if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT))
|
||
|
|
return 1;
|
||
|
|
|
||
|
|
if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT))
|
||
|
|
return 1;
|
||
|
|
|
||
|
|
/* ok, setup config access */
|
||
|
|
val = (reg << MPI_L2PCFG_REG_SHIFT);
|
||
|
|
val |= (func << MPI_L2PCFG_FUNC_SHIFT);
|
||
|
|
val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT);
|
||
|
|
val |= MPI_L2PCFG_CFG_USEREG_MASK;
|
||
|
|
val |= MPI_L2PCFG_CFG_SEL_MASK;
|
||
|
|
/* type 0 cycle for local bus, type 1 cycle for anything else */
|
||
|
|
if (type != 0) {
|
||
|
|
/* FIXME: how to specify bus ??? */
|
||
|
|
val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT);
|
||
|
|
}
|
||
|
|
bcm_mpi_writel(val, MPI_L2PCFG_REG);
|
||
|
|
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm63xx_do_cfg_read(int type, unsigned int busn,
|
||
|
|
unsigned int devfn, int where, int size,
|
||
|
|
u32 *val)
|
||
|
|
{
|
||
|
|
u32 data;
|
||
|
|
|
||
|
|
/* two phase cycle, first we write address, then read data at
|
||
|
|
* another location, caller already has a spinlock so no need
|
||
|
|
* to add one here */
|
||
|
|
if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
|
||
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
||
|
|
iob();
|
||
|
|
data = le32_to_cpu(__raw_readl(pci_iospace_start));
|
||
|
|
/* restore IO space normal behaviour */
|
||
|
|
bcm_mpi_writel(0, MPI_L2PCFG_REG);
|
||
|
|
|
||
|
|
*val = postprocess_read(data, where, size);
|
||
|
|
|
||
|
|
return PCIBIOS_SUCCESSFUL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm63xx_do_cfg_write(int type, unsigned int busn,
|
||
|
|
unsigned int devfn, int where, int size,
|
||
|
|
u32 val)
|
||
|
|
{
|
||
|
|
u32 data;
|
||
|
|
|
||
|
|
/* two phase cycle, first we write address, then write data to
|
||
|
|
* another location, caller already has a spinlock so no need
|
||
|
|
* to add one here */
|
||
|
|
if (bcm63xx_setup_cfg_access(type, busn, devfn, where))
|
||
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
||
|
|
iob();
|
||
|
|
|
||
|
|
data = le32_to_cpu(__raw_readl(pci_iospace_start));
|
||
|
|
data = preprocess_write(data, val, where, size);
|
||
|
|
|
||
|
|
__raw_writel(cpu_to_le32(data), pci_iospace_start);
|
||
|
|
wmb();
|
||
|
|
/* no way to know the access is done, we have to wait */
|
||
|
|
udelay(500);
|
||
|
|
/* restore IO space normal behaviour */
|
||
|
|
bcm_mpi_writel(0, MPI_L2PCFG_REG);
|
||
|
|
|
||
|
|
return PCIBIOS_SUCCESSFUL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn,
|
||
|
|
int where, int size, u32 *val)
|
||
|
|
{
|
||
|
|
int type;
|
||
|
|
|
||
|
|
type = bus->parent ? 1 : 0;
|
||
|
|
|
||
|
|
if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
|
||
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
||
|
|
|
||
|
|
return bcm63xx_do_cfg_read(type, bus->number, devfn,
|
||
|
|
where, size, val);
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn,
|
||
|
|
int where, int size, u32 val)
|
||
|
|
{
|
||
|
|
int type;
|
||
|
|
|
||
|
|
type = bus->parent ? 1 : 0;
|
||
|
|
|
||
|
|
if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL)
|
||
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
||
|
|
|
||
|
|
return bcm63xx_do_cfg_write(type, bus->number, devfn,
|
||
|
|
where, size, val);
|
||
|
|
}
|
||
|
|
|
||
|
|
struct pci_ops bcm63xx_pci_ops = {
|
||
|
|
.read = bcm63xx_pci_read,
|
||
|
|
.write = bcm63xx_pci_write
|
||
|
|
};
|
||
|
|
|
||
|
|
#ifdef CONFIG_CARDBUS
|
||
|
|
/*
|
||
|
|
* emulate configuration read access on a cardbus bridge
|
||
|
|
*/
|
||
|
|
#define FAKE_CB_BRIDGE_SLOT 0x1e
|
||
|
|
|
||
|
|
static int fake_cb_bridge_bus_number = -1;
|
||
|
|
|
||
|
|
static struct {
|
||
|
|
u16 pci_command;
|
||
|
|
u8 cb_latency;
|
||
|
|
u8 subordinate_busn;
|
||
|
|
u8 cardbus_busn;
|
||
|
|
u8 pci_busn;
|
||
|
|
int bus_assigned;
|
||
|
|
u16 bridge_control;
|
||
|
|
|
||
|
|
u32 mem_base0;
|
||
|
|
u32 mem_limit0;
|
||
|
|
u32 mem_base1;
|
||
|
|
u32 mem_limit1;
|
||
|
|
|
||
|
|
u32 io_base0;
|
||
|
|
u32 io_limit0;
|
||
|
|
u32 io_base1;
|
||
|
|
u32 io_limit1;
|
||
|
|
} fake_cb_bridge_regs;
|
||
|
|
|
||
|
|
static int fake_cb_bridge_read(int where, int size, u32 *val)
|
||
|
|
{
|
||
|
|
unsigned int reg;
|
||
|
|
u32 data;
|
||
|
|
|
||
|
|
data = 0;
|
||
|
|
reg = where >> 2;
|
||
|
|
switch (reg) {
|
||
|
|
case (PCI_VENDOR_ID >> 2):
|
||
|
|
case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2):
|
||
|
|
/* create dummy vendor/device id from our cpu id */
|
||
|
|
data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_COMMAND >> 2):
|
||
|
|
data = (PCI_STATUS_DEVSEL_SLOW << 16);
|
||
|
|
data |= fake_cb_bridge_regs.pci_command;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CLASS_REVISION >> 2):
|
||
|
|
data = (PCI_CLASS_BRIDGE_CARDBUS << 16);
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CACHE_LINE_SIZE >> 2):
|
||
|
|
data = (PCI_HEADER_TYPE_CARDBUS << 16);
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_INTERRUPT_LINE >> 2):
|
||
|
|
/* bridge control */
|
||
|
|
data = (fake_cb_bridge_regs.bridge_control << 16);
|
||
|
|
/* pin:intA line:0xff */
|
||
|
|
data |= (0x1 << 8) | 0xff;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_PRIMARY_BUS >> 2):
|
||
|
|
data = (fake_cb_bridge_regs.cb_latency << 24);
|
||
|
|
data |= (fake_cb_bridge_regs.subordinate_busn << 16);
|
||
|
|
data |= (fake_cb_bridge_regs.cardbus_busn << 8);
|
||
|
|
data |= fake_cb_bridge_regs.pci_busn;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_MEMORY_BASE_0 >> 2):
|
||
|
|
data = fake_cb_bridge_regs.mem_base0;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_MEMORY_LIMIT_0 >> 2):
|
||
|
|
data = fake_cb_bridge_regs.mem_limit0;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_MEMORY_BASE_1 >> 2):
|
||
|
|
data = fake_cb_bridge_regs.mem_base1;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_MEMORY_LIMIT_1 >> 2):
|
||
|
|
data = fake_cb_bridge_regs.mem_limit1;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_IO_BASE_0 >> 2):
|
||
|
|
/* | 1 for 32bits io support */
|
||
|
|
data = fake_cb_bridge_regs.io_base0 | 0x1;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_IO_LIMIT_0 >> 2):
|
||
|
|
data = fake_cb_bridge_regs.io_limit0;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_IO_BASE_1 >> 2):
|
||
|
|
/* | 1 for 32bits io support */
|
||
|
|
data = fake_cb_bridge_regs.io_base1 | 0x1;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_IO_LIMIT_1 >> 2):
|
||
|
|
data = fake_cb_bridge_regs.io_limit1;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
*val = postprocess_read(data, where, size);
|
||
|
|
return PCIBIOS_SUCCESSFUL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
* emulate configuration write access on a cardbus bridge
|
||
|
|
*/
|
||
|
|
static int fake_cb_bridge_write(int where, int size, u32 val)
|
||
|
|
{
|
||
|
|
unsigned int reg;
|
||
|
|
u32 data, tmp;
|
||
|
|
int ret;
|
||
|
|
|
||
|
|
ret = fake_cb_bridge_read((where & ~0x3), 4, &data);
|
||
|
|
if (ret != PCIBIOS_SUCCESSFUL)
|
||
|
|
return ret;
|
||
|
|
|
||
|
|
data = preprocess_write(data, val, where, size);
|
||
|
|
|
||
|
|
reg = where >> 2;
|
||
|
|
switch (reg) {
|
||
|
|
case (PCI_COMMAND >> 2):
|
||
|
|
fake_cb_bridge_regs.pci_command = (data & 0xffff);
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_PRIMARY_BUS >> 2):
|
||
|
|
fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff;
|
||
|
|
fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff;
|
||
|
|
fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff;
|
||
|
|
fake_cb_bridge_regs.pci_busn = data & 0xff;
|
||
|
|
if (fake_cb_bridge_regs.cardbus_busn)
|
||
|
|
fake_cb_bridge_regs.bus_assigned = 1;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_INTERRUPT_LINE >> 2):
|
||
|
|
tmp = (data >> 16) & 0xffff;
|
||
|
|
/* disable memory prefetch support */
|
||
|
|
tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0;
|
||
|
|
tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1;
|
||
|
|
fake_cb_bridge_regs.bridge_control = tmp;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_MEMORY_BASE_0 >> 2):
|
||
|
|
fake_cb_bridge_regs.mem_base0 = data;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_MEMORY_LIMIT_0 >> 2):
|
||
|
|
fake_cb_bridge_regs.mem_limit0 = data;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_MEMORY_BASE_1 >> 2):
|
||
|
|
fake_cb_bridge_regs.mem_base1 = data;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_MEMORY_LIMIT_1 >> 2):
|
||
|
|
fake_cb_bridge_regs.mem_limit1 = data;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_IO_BASE_0 >> 2):
|
||
|
|
fake_cb_bridge_regs.io_base0 = data;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_IO_LIMIT_0 >> 2):
|
||
|
|
fake_cb_bridge_regs.io_limit0 = data;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_IO_BASE_1 >> 2):
|
||
|
|
fake_cb_bridge_regs.io_base1 = data;
|
||
|
|
break;
|
||
|
|
|
||
|
|
case (PCI_CB_IO_LIMIT_1 >> 2):
|
||
|
|
fake_cb_bridge_regs.io_limit1 = data;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
|
||
|
|
return PCIBIOS_SUCCESSFUL;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn,
|
||
|
|
int where, int size, u32 *val)
|
||
|
|
{
|
||
|
|
/* snoop access to slot 0x1e on root bus, we fake a cardbus
|
||
|
|
* bridge at this location */
|
||
|
|
if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
|
||
|
|
fake_cb_bridge_bus_number = bus->number;
|
||
|
|
return fake_cb_bridge_read(where, size, val);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* a configuration cycle for the device behind the cardbus
|
||
|
|
* bridge is actually done as a type 0 cycle on the primary
|
||
|
|
* bus. This means that only one device can be on the cardbus
|
||
|
|
* bus */
|
||
|
|
if (fake_cb_bridge_regs.bus_assigned &&
|
||
|
|
bus->number == fake_cb_bridge_regs.cardbus_busn &&
|
||
|
|
PCI_SLOT(devfn) == 0)
|
||
|
|
return bcm63xx_do_cfg_read(0, 0,
|
||
|
|
PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
|
||
|
|
where, size, val);
|
||
|
|
|
||
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn,
|
||
|
|
int where, int size, u32 val)
|
||
|
|
{
|
||
|
|
if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) {
|
||
|
|
fake_cb_bridge_bus_number = bus->number;
|
||
|
|
return fake_cb_bridge_write(where, size, val);
|
||
|
|
}
|
||
|
|
|
||
|
|
if (fake_cb_bridge_regs.bus_assigned &&
|
||
|
|
bus->number == fake_cb_bridge_regs.cardbus_busn &&
|
||
|
|
PCI_SLOT(devfn) == 0)
|
||
|
|
return bcm63xx_do_cfg_write(0, 0,
|
||
|
|
PCI_DEVFN(CARDBUS_PCI_IDSEL, 0),
|
||
|
|
where, size, val);
|
||
|
|
|
||
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
||
|
|
}
|
||
|
|
|
||
|
|
struct pci_ops bcm63xx_cb_ops = {
|
||
|
|
.read = bcm63xx_cb_read,
|
||
|
|
.write = bcm63xx_cb_write,
|
||
|
|
};
|
||
|
|
|
||
|
|
/*
|
||
|
|
* only one IO window, so it cannot be shared by PCI and cardbus, use
|
||
|
|
* fixup to choose and detect unhandled configuration
|
||
|
|
*/
|
||
|
|
static void bcm63xx_fixup(struct pci_dev *dev)
|
||
|
|
{
|
||
|
|
static int io_window = -1;
|
||
|
|
int i, found, new_io_window;
|
||
|
|
u32 val;
|
||
|
|
|
||
|
|
/* look for any io resource */
|
||
|
|
found = 0;
|
||
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
||
|
|
if (pci_resource_flags(dev, i) & IORESOURCE_IO) {
|
||
|
|
found = 1;
|
||
|
|
break;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
|
||
|
|
if (!found)
|
||
|
|
return;
|
||
|
|
|
||
|
|
/* skip our fake bus with only cardbus bridge on it */
|
||
|
|
if (dev->bus->number == fake_cb_bridge_bus_number)
|
||
|
|
return;
|
||
|
|
|
||
|
|
/* find on which bus the device is */
|
||
|
|
if (fake_cb_bridge_regs.bus_assigned &&
|
||
|
|
dev->bus->number == fake_cb_bridge_regs.cardbus_busn &&
|
||
|
|
PCI_SLOT(dev->devfn) == 0)
|
||
|
|
new_io_window = 1;
|
||
|
|
else
|
||
|
|
new_io_window = 0;
|
||
|
|
|
||
|
|
if (new_io_window == io_window)
|
||
|
|
return;
|
||
|
|
|
||
|
|
if (io_window != -1) {
|
||
|
|
printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
|
||
|
|
"need IO, which hardware cannot do\n");
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
|
||
|
|
printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
|
||
|
|
(new_io_window == 0) ? "PCI" : "cardbus");
|
||
|
|
|
||
|
|
val = bcm_mpi_readl(MPI_L2PIOREMAP_REG);
|
||
|
|
if (io_window)
|
||
|
|
val |= MPI_L2PREMAP_IS_CARDBUS_MASK;
|
||
|
|
else
|
||
|
|
val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK;
|
||
|
|
bcm_mpi_writel(val, MPI_L2PIOREMAP_REG);
|
||
|
|
|
||
|
|
io_window = new_io_window;
|
||
|
|
}
|
||
|
|
|
||
|
|
DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
|
||
|
|
#endif
|