Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/powerpc/lib/copypage_power7.S

166 lines
3.3 KiB
ArmAsm
Raw Normal View History

powerpc: POWER7 optimised copy_page using VMX and enhanced prefetch Implement a POWER7 optimised copy_page using VMX and enhanced prefetch instructions. We use enhanced prefetch hints to prefetch both the load and store side. We copy a cacheline at a time and fall back to regular loads and stores if we are unable to use VMX (eg we are in an interrupt). The following microbenchmark was used to assess the impact of the patch: http://ozlabs.org/~anton/junkcode/page_fault_file.c We test MAP_PRIVATE page faults across a 1GB file, 100 times: # time ./page_fault_file -p -l 1G -i 100 Before: 22.25s After: 18.89s 17% faster Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-05-29 13:33:12 -06:00
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Copyright (C) IBM Corporation, 2012
*
* Author: Anton Blanchard <anton@au.ibm.com>
*/
#include <asm/page.h>
#include <asm/ppc_asm.h>
_GLOBAL(copypage_power7)
/*
* We prefetch both the source and destination using enhanced touch
* instructions. We use a stream ID of 0 for the load side and
* 1 for the store side. Since source and destination are page
* aligned we don't need to clear the bottom 7 bits of either
* address.
*/
ori r9,r3,1 /* stream=1 */
#ifdef CONFIG_PPC_64K_PAGES
lis r7,0x0E01 /* depth=7, units=512 */
#else
lis r7,0x0E00 /* depth=7 */
ori r7,r7,0x1000 /* units=32 */
#endif
ori r10,r7,1 /* stream=1 */
lis r8,0x8000 /* GO=1 */
clrldi r8,r8,32
.machine push
.machine "power4"
dcbt r0,r4,0b01000
dcbt r0,r7,0b01010
dcbtst r0,r9,0b01000
dcbtst r0,r10,0b01010
eieio
dcbt r0,r8,0b01010 /* GO */
.machine pop
#ifdef CONFIG_ALTIVEC
mflr r0
std r3,48(r1)
std r4,56(r1)
std r0,16(r1)
stdu r1,-STACKFRAMESIZE(r1)
bl .enter_vmx_copy
cmpwi r3,0
ld r0,STACKFRAMESIZE+16(r1)
ld r3,STACKFRAMESIZE+48(r1)
ld r4,STACKFRAMESIZE+56(r1)
mtlr r0
li r0,(PAGE_SIZE/128)
mtctr r0
beq .Lnonvmx_copy
addi r1,r1,STACKFRAMESIZE
li r6,16
li r7,32
li r8,48
li r9,64
li r10,80
li r11,96
li r12,112
.align 5
1: lvx vr7,r0,r4
lvx vr6,r4,r6
lvx vr5,r4,r7
lvx vr4,r4,r8
lvx vr3,r4,r9
lvx vr2,r4,r10
lvx vr1,r4,r11
lvx vr0,r4,r12
addi r4,r4,128
stvx vr7,r0,r3
stvx vr6,r3,r6
stvx vr5,r3,r7
stvx vr4,r3,r8
stvx vr3,r3,r9
stvx vr2,r3,r10
stvx vr1,r3,r11
stvx vr0,r3,r12
addi r3,r3,128
bdnz 1b
b .exit_vmx_copy /* tail call optimise */
#else
li r0,(PAGE_SIZE/128)
mtctr r0
stdu r1,-STACKFRAMESIZE(r1)
#endif
.Lnonvmx_copy:
powerpc: Fix usage of register macros getting ready for %r0 change Anything that uses a constructed instruction (ie. from ppc-opcode.h), need to use the new R0 macro, as %r0 is not going to work. Also convert usages of macros where we are just determining an offset (usually for a load/store), like: std r14,STK_REG(r14)(r1) Can't use STK_REG(r14) as %r14 doesn't work in the STK_REG macro since it's just calculating an offset. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-25 07:33:10 -06:00
std r14,STK_REG(R14)(r1)
std r15,STK_REG(R15)(r1)
std r16,STK_REG(R16)(r1)
std r17,STK_REG(R17)(r1)
std r18,STK_REG(R18)(r1)
std r19,STK_REG(R19)(r1)
std r20,STK_REG(R20)(r1)
powerpc: POWER7 optimised copy_page using VMX and enhanced prefetch Implement a POWER7 optimised copy_page using VMX and enhanced prefetch instructions. We use enhanced prefetch hints to prefetch both the load and store side. We copy a cacheline at a time and fall back to regular loads and stores if we are unable to use VMX (eg we are in an interrupt). The following microbenchmark was used to assess the impact of the patch: http://ozlabs.org/~anton/junkcode/page_fault_file.c We test MAP_PRIVATE page faults across a 1GB file, 100 times: # time ./page_fault_file -p -l 1G -i 100 Before: 22.25s After: 18.89s 17% faster Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-05-29 13:33:12 -06:00
1: ld r0,0(r4)
ld r5,8(r4)
ld r6,16(r4)
ld r7,24(r4)
ld r8,32(r4)
ld r9,40(r4)
ld r10,48(r4)
ld r11,56(r4)
ld r12,64(r4)
ld r14,72(r4)
ld r15,80(r4)
ld r16,88(r4)
ld r17,96(r4)
ld r18,104(r4)
ld r19,112(r4)
ld r20,120(r4)
addi r4,r4,128
std r0,0(r3)
std r5,8(r3)
std r6,16(r3)
std r7,24(r3)
std r8,32(r3)
std r9,40(r3)
std r10,48(r3)
std r11,56(r3)
std r12,64(r3)
std r14,72(r3)
std r15,80(r3)
std r16,88(r3)
std r17,96(r3)
std r18,104(r3)
std r19,112(r3)
std r20,120(r3)
addi r3,r3,128
bdnz 1b
powerpc: Fix usage of register macros getting ready for %r0 change Anything that uses a constructed instruction (ie. from ppc-opcode.h), need to use the new R0 macro, as %r0 is not going to work. Also convert usages of macros where we are just determining an offset (usually for a load/store), like: std r14,STK_REG(r14)(r1) Can't use STK_REG(r14) as %r14 doesn't work in the STK_REG macro since it's just calculating an offset. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-06-25 07:33:10 -06:00
ld r14,STK_REG(R14)(r1)
ld r15,STK_REG(R15)(r1)
ld r16,STK_REG(R16)(r1)
ld r17,STK_REG(R17)(r1)
ld r18,STK_REG(R18)(r1)
ld r19,STK_REG(R19)(r1)
ld r20,STK_REG(R20)(r1)
powerpc: POWER7 optimised copy_page using VMX and enhanced prefetch Implement a POWER7 optimised copy_page using VMX and enhanced prefetch instructions. We use enhanced prefetch hints to prefetch both the load and store side. We copy a cacheline at a time and fall back to regular loads and stores if we are unable to use VMX (eg we are in an interrupt). The following microbenchmark was used to assess the impact of the patch: http://ozlabs.org/~anton/junkcode/page_fault_file.c We test MAP_PRIVATE page faults across a 1GB file, 100 times: # time ./page_fault_file -p -l 1G -i 100 Before: 22.25s After: 18.89s 17% faster Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-05-29 13:33:12 -06:00
addi r1,r1,STACKFRAMESIZE
blr
Reference in a new issue Copy permalink