kernel-fxtec-pro1x/arch/powerpc/boot/dts/mpc8548cds.dtsi

307 lines
7.6 KiB
Text
Raw Normal View History

/*
* MPC8548CDS Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2012 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_lbc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x01000000>;
bank-width = <2>;
device-width = <2>;
partition@0 {
reg = <0x0 0x0b00000>;
label = "ramdisk-nor";
};
partition@300000 {
reg = <0x0b00000 0x0400000>;
label = "kernel-nor";
};
partition@700000 {
reg = <0x0f00000 0x060000>;
label = "dtb-nor";
};
partition@760000 {
reg = <0x0f60000 0x020000>;
label = "env-nor";
read-only;
};
partition@780000 {
reg = <0x0f80000 0x080000>;
label = "u-boot-nor";
read-only;
};
};
board-control@1,0 {
compatible = "fsl,mpc8548cds-fpga";
reg = <0x1 0x0 0x1000>;
};
};
&board_soc {
i2c@3000 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
eeprom@56 {
compatible = "atmel,24c64";
reg = <0x56>;
};
eeprom@57 {
compatible = "atmel,24c64";
reg = <0x57>;
};
};
i2c@3100 {
eeprom@50 {
compatible = "atmel,24c64";
reg = <0x50>;
};
};
enet0: ethernet@24000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
mdio@24520 {
phy0: ethernet-phy@0 {
interrupts = <5 1 0 0>;
reg = <0x0>;
device_type = "ethernet-phy";
};
phy1: ethernet-phy@1 {
interrupts = <5 1 0 0>;
reg = <0x1>;
device_type = "ethernet-phy";
};
phy2: ethernet-phy@2 {
interrupts = <5 1 0 0>;
reg = <0x2>;
device_type = "ethernet-phy";
};
phy3: ethernet-phy@3 {
interrupts = <5 1 0 0>;
reg = <0x3>;
device_type = "ethernet-phy";
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet1: ethernet@25000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
mdio@25520 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet2: ethernet@26000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
};
mdio@26520 {
tbi2: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet3: ethernet@27000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
};
mdio@27520 {
tbi3: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
&board_pci0 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x4 (PCIX Slot 2) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x5 (PCIX Slot 3) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x6 (PCIX Slot 4) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x8 (PCIX Slot 5) */
0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0xC (Tsi310 bridge) */
0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x14 (Slot 2) */
0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x15 (Slot 3) */
0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0
0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0
0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0
/* IDSEL 0x16 (Slot 4) */
0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDSEL 0x18 (Slot 5) */
0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x1C (Tsi310 bridge PCI primary) */
0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>;
pci_bridge@1c {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x00 (PrPMC Site) */
0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x04 (VIA chip) */
0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0
0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0
0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0
0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0
/* IDSEL 0x05 (8139) */
0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0
/* IDSEL 0x06 (Slot 6) */
0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0
0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
/* IDESL 0x07 (Slot 7) */
0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0
0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>;
reg = <0xe000 0x0 0x0 0x0 0x0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x80000>;
clock-frequency = <33333333>;
isa@4 {
device_type = "isa";
#interrupt-cells = <2>;
#size-cells = <1>;
#address-cells = <2>;
reg = <0x2000 0x0 0x0 0x0 0x0>;
ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>;
interrupt-parent = <&i8259>;
i8259: interrupt-controller@20 {
interrupt-controller;
device_type = "interrupt-controller";
reg = <0x1 0x20 0x2
0x1 0xa0 0x2
0x1 0x4d0 0x2>;
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "chrp,iic";
interrupts = <0 1 0 0>;
interrupt-parent = <&mpic>;
};
rtc@70 {
compatible = "pnpPNP,b00";
reg = <0x1 0x70 0x2>;
};
};
};
};