kernel-fxtec-pro1x/arch/x86/pci/numaq_32.c

166 lines
3.6 KiB
C
Raw Normal View History

/*
* numaq_32.c - Low-level PCI access for NUMA-Q machines
*/
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/nodemask.h>
#include <asm/apic.h>
#include <asm/mpspec.h>
#include <asm/pci_x86.h>
#include <asm/numaq.h>
#define BUS2QUAD(global) (mp_bus_id_to_node[global])
#define BUS2LOCAL(global) (mp_bus_id_to_local[global])
#define QUADLOCAL2BUS(quad,local) (quad_local_to_mp_bus_id[quad][local])
#define PCI_CONF1_MQ_ADDRESS(bus, devfn, reg) \
(0x80000000 | (BUS2LOCAL(bus) << 16) | (devfn << 8) | (reg & ~3))
static void write_cf8(unsigned bus, unsigned devfn, unsigned reg)
{
unsigned val = PCI_CONF1_MQ_ADDRESS(bus, devfn, reg);
if (xquad_portio)
writel(val, XQUAD_PORT_ADDR(0xcf8, BUS2QUAD(bus)));
else
outl(val, 0xCF8);
}
static int pci_conf1_mq_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
WARN_ON(seg);
if (!value || (bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
raw_spin_lock_irqsave(&pci_config_lock, flags);
write_cf8(bus, devfn, reg);
switch (len) {
case 1:
if (xquad_portio)
*value = readb(adr + (reg & 3));
else
*value = inb(0xCFC + (reg & 3));
break;
case 2:
if (xquad_portio)
*value = readw(adr + (reg & 2));
else
*value = inw(0xCFC + (reg & 2));
break;
case 4:
if (xquad_portio)
*value = readl(adr);
else
*value = inl(0xCFC);
break;
}
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
static int pci_conf1_mq_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
unsigned long flags;
void *adr __iomem = XQUAD_PORT_ADDR(0xcfc, BUS2QUAD(bus));
WARN_ON(seg);
if ((bus >= MAX_MP_BUSSES) || (devfn > 255) || (reg > 255))
return -EINVAL;
raw_spin_lock_irqsave(&pci_config_lock, flags);
write_cf8(bus, devfn, reg);
switch (len) {
case 1:
if (xquad_portio)
writeb(value, adr + (reg & 3));
else
outb((u8)value, 0xCFC + (reg & 3));
break;
case 2:
if (xquad_portio)
writew(value, adr + (reg & 2));
else
outw((u16)value, 0xCFC + (reg & 2));
break;
case 4:
if (xquad_portio)
writel(value, adr + reg);
else
outl((u32)value, 0xCFC);
break;
}
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
return 0;
}
#undef PCI_CONF1_MQ_ADDRESS
static const struct pci_raw_ops pci_direct_conf1_mq = {
.read = pci_conf1_mq_read,
.write = pci_conf1_mq_write
};
static void __devinit pci_fixup_i450nx(struct pci_dev *d)
{
/*
* i450NX -- Find and scan all secondary buses on all PXB's.
*/
int pxb, reg;
u8 busno, suba, subb;
int quad = BUS2QUAD(d->bus->number);
dev_info(&d->dev, "searching for i450NX host bridges\n");
reg = 0xd0;
for(pxb=0; pxb<2; pxb++) {
pci_read_config_byte(d, reg++, &busno);
pci_read_config_byte(d, reg++, &suba);
pci_read_config_byte(d, reg++, &subb);
dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n",
pxb, busno, suba, subb);
finish i386 and x86-64 sysdata conversion This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully also fixes Riku's and Andy's observed bugs. It is based on Yinghai Lu's and Andy Whitcroft's patches (thanks!) with some changes: - introduce pci_scan_bus_with_sysdata() and use it instead of pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will allocate the sysdata structure and then call pci_scan_bus(). - always allocate pci_sysdata dynamically. The whole point of this sysdata work is to make it easy to do root-bus specific things (e.g., support PCI domains and IOMMU's). I dislike using a default struct pci_sysdata in some places and a dynamically allocated pci_sysdata elsewhere - the potential for someone indavertantly changing the default structure is too high. - this patch only makes the minimal changes necessary, i.e., the NUMA node is always initialized to -1. Patches to do the right thing with regards to the NUMA node can build on top of this (either add a 'node' parameter to pci_scan_bus_with_sysdata() or just update the node when it becomes known). The patch was compile tested with various configurations (e.g., NUMAQ, VISWS) and run-time tested on i386 and x86-64. Unfortunately none of my machines exhibited the bugs so caveat emptor. Andy, could you please see if this fixes the NUMA issues you've seen? Riku, does this fix "pci=noacpi" on your laptop? Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: <riku.seppala@kymp.net> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-10 14:01:19 -06:00
if (busno) {
/* Bus A */
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, busno));
}
if (suba < subb) {
/* Bus B */
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, suba+1));
}
}
pcibios_last_bus = -1;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx);
int __init pci_numaq_init(void)
{
int quad;
raw_pci_ops = &pci_direct_conf1_mq;
pci_root_bus = pcibios_scan_root(0);
if (num_online_nodes() > 1)
for_each_online_node(quad) {
if (quad == 0)
continue;
printk("Scanning PCI bus %d for quad %d\n",
QUADLOCAL2BUS(quad,0), quad);
finish i386 and x86-64 sysdata conversion This patch finishes the i386 and x86-64 ->sysdata conversion and hopefully also fixes Riku's and Andy's observed bugs. It is based on Yinghai Lu's and Andy Whitcroft's patches (thanks!) with some changes: - introduce pci_scan_bus_with_sysdata() and use it instead of pci_scan_bus() where appropriate. pci_scan_bus_with_sysdata() will allocate the sysdata structure and then call pci_scan_bus(). - always allocate pci_sysdata dynamically. The whole point of this sysdata work is to make it easy to do root-bus specific things (e.g., support PCI domains and IOMMU's). I dislike using a default struct pci_sysdata in some places and a dynamically allocated pci_sysdata elsewhere - the potential for someone indavertantly changing the default structure is too high. - this patch only makes the minimal changes necessary, i.e., the NUMA node is always initialized to -1. Patches to do the right thing with regards to the NUMA node can build on top of this (either add a 'node' parameter to pci_scan_bus_with_sysdata() or just update the node when it becomes known). The patch was compile tested with various configurations (e.g., NUMAQ, VISWS) and run-time tested on i386 and x86-64. Unfortunately none of my machines exhibited the bugs so caveat emptor. Andy, could you please see if this fixes the NUMA issues you've seen? Riku, does this fix "pci=noacpi" on your laptop? Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Andi Kleen <ak@suse.de> Cc: Chuck Ebbert <cebbert@redhat.com> Cc: <riku.seppala@kymp.net> Cc: Andy Whitcroft <apw@shadowen.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-08-10 14:01:19 -06:00
pci_scan_bus_with_sysdata(QUADLOCAL2BUS(quad, 0));
}
return 0;
}