kernel-fxtec-pro1x/arch/x86/boot/header.S

/*
 *	header.S
 *
 *	Copyright (C) 1991, 1992 Linus Torvalds
 *
 *	Based on bootsect.S and setup.S
 *	modified by more people than can be counted
 *
 *	Rewritten as a common file by H. Peter Anvin (Apr 2007)
 *
 * BIG FAT NOTE: We're in real mode using 64k segments.  Therefore segment
 * addresses must be multiplied by 16 to obtain their respective linear
 * addresses. To avoid confusion, linear addresses are written using leading
 * hex while segment addresses are written as segment:offset.
 *
 */

#include <asm/segment.h>
#include <generated/utsrelease.h>
#include <asm/boot.h>
#include <asm/e820.h>
#include <asm/page_types.h>
#include <asm/setup.h>
#include "boot.h"
#include "voffset.h"
#include "zoffset.h"

BOOTSEG		= 0x07C0		/* original address of boot-sector */
SYSSEG		= 0x1000		/* historical load address >> 4 */

#ifndef SVGA_MODE
#define SVGA_MODE ASK_VGA
#endif

#ifndef RAMDISK
#define RAMDISK 0
#endif

#ifndef ROOT_RDONLY
#define ROOT_RDONLY 1
#endif

	.code16
	.section ".bstext", "ax"

	.global bootsect_start
bootsect_start:
#ifdef CONFIG_EFI_STUB
	# "MZ", MS-DOS header
	.byte 0x4d
	.byte 0x5a
#endif

	# Normalize the start address
	ljmp	$BOOTSEG, $start2

start2:
	movw	%cs, %ax
	movw	%ax, %ds
	movw	%ax, %es
	movw	%ax, %ss
	xorw	%sp, %sp
	sti
	cld

	movw	$bugger_off_msg, %si

msg_loop:
	lodsb
	andb	%al, %al
	jz	bs_die
	movb	$0xe, %ah
	movw	$7, %bx
	int	$0x10
	jmp	msg_loop

bs_die:
	# Allow the user to press a key, then reboot
	xorw	%ax, %ax
	int	$0x16
	int	$0x19

	# int 0x19 should never return.  In case it does anyway,
	# invoke the BIOS reset code...
	ljmp	$0xf000,$0xfff0

#ifdef CONFIG_EFI_STUB
	.org	0x3c
	#
	# Offset to the PE header.
	#
	.long	pe_header
#endif /* CONFIG_EFI_STUB */

	.section ".bsdata", "a"
bugger_off_msg:
	.ascii	"Direct floppy boot is not supported. "
	.ascii	"Use a boot loader program instead.\r\n"
	.ascii	"\n"
	.ascii	"Remove disk and press any key to reboot ...\r\n"
	.byte	0

#ifdef CONFIG_EFI_STUB
pe_header:
	.ascii	"PE"
	.word 	0

coff_header:
#ifdef CONFIG_X86_32
	.word	0x14c				# i386
#else
	.word	0x8664				# x86-64
#endif
	.word	3				# nr_sections
	.long	0 				# TimeDateStamp
	.long	0				# PointerToSymbolTable
	.long	1				# NumberOfSymbols
	.word	section_table - optional_header	# SizeOfOptionalHeader
#ifdef CONFIG_X86_32
	.word	0x306				# Characteristics.
						# IMAGE_FILE_32BIT_MACHINE |
						# IMAGE_FILE_DEBUG_STRIPPED |
						# IMAGE_FILE_EXECUTABLE_IMAGE |
						# IMAGE_FILE_LINE_NUMS_STRIPPED
#else
	.word	0x206				# Characteristics
						# IMAGE_FILE_DEBUG_STRIPPED |
						# IMAGE_FILE_EXECUTABLE_IMAGE |
						# IMAGE_FILE_LINE_NUMS_STRIPPED
#endif

optional_header:
#ifdef CONFIG_X86_32
	.word	0x10b				# PE32 format
#else
	.word	0x20b 				# PE32+ format
#endif
	.byte	0x02				# MajorLinkerVersion
	.byte	0x14				# MinorLinkerVersion

	# Filled in by build.c
	.long	0				# SizeOfCode

	.long	0				# SizeOfInitializedData
	.long	0				# SizeOfUninitializedData

	# Filled in by build.c
	.long	0x0000				# AddressOfEntryPoint

	.long	0x0200				# BaseOfCode
#ifdef CONFIG_X86_32
	.long	0				# data
#endif

extra_header_fields:
#ifdef CONFIG_X86_32
	.long	0				# ImageBase
#else
	.quad	0				# ImageBase
#endif
	.long	0x20				# SectionAlignment
	.long	0x20				# FileAlignment
	.word	0				# MajorOperatingSystemVersion
	.word	0				# MinorOperatingSystemVersion
	.word	0				# MajorImageVersion
	.word	0				# MinorImageVersion
	.word	0				# MajorSubsystemVersion
	.word	0				# MinorSubsystemVersion
	.long	0				# Win32VersionValue

	#
	# The size of the bzImage is written in tools/build.c
	#
	.long	0				# SizeOfImage

	.long	0x200				# SizeOfHeaders
	.long	0				# CheckSum
	.word	0xa				# Subsystem (EFI application)
	.word	0				# DllCharacteristics
#ifdef CONFIG_X86_32
	.long	0				# SizeOfStackReserve
	.long	0				# SizeOfStackCommit
	.long	0				# SizeOfHeapReserve
	.long	0				# SizeOfHeapCommit
#else
	.quad	0				# SizeOfStackReserve
	.quad	0				# SizeOfStackCommit
	.quad	0				# SizeOfHeapReserve
	.quad	0				# SizeOfHeapCommit
#endif
	.long	0				# LoaderFlags
	.long	0x6				# NumberOfRvaAndSizes

	.quad	0				# ExportTable
	.quad	0				# ImportTable
	.quad	0				# ResourceTable
	.quad	0				# ExceptionTable
	.quad	0				# CertificationTable
	.quad	0				# BaseRelocationTable

	# Section table
section_table:
	#
	# The offset & size fields are filled in by build.c.
	#
	.ascii	".setup"
	.byte	0
	.byte	0
	.long	0
	.long	0x0				# startup_{32,64}
	.long	0				# Size of initialized data
						# on disk
	.long	0x0				# startup_{32,64}
	.long	0				# PointerToRelocations
	.long	0				# PointerToLineNumbers
	.word	0				# NumberOfRelocations
	.word	0				# NumberOfLineNumbers
	.long	0x60500020			# Characteristics (section flags)

	#
	# The EFI application loader requires a relocation section
	# because EFI applications must be relocatable. The .reloc
	# offset & size fields are filled in by build.c.
	#
	.ascii	".reloc"
	.byte	0
	.byte	0
	.long	0
	.long	0
	.long	0				# SizeOfRawData
	.long	0				# PointerToRawData
	.long	0				# PointerToRelocations
	.long	0				# PointerToLineNumbers
	.word	0				# NumberOfRelocations
	.word	0				# NumberOfLineNumbers
	.long	0x42100040			# Characteristics (section flags)

	#
	# The offset & size fields are filled in by build.c.
	#
	.ascii	".text"
	.byte	0
	.byte	0
	.byte	0
	.long	0
	.long	0x0				# startup_{32,64}
	.long	0				# Size of initialized data
						# on disk
	.long	0x0				# startup_{32,64}
	.long	0				# PointerToRelocations
	.long	0				# PointerToLineNumbers
	.word	0				# NumberOfRelocations
	.word	0				# NumberOfLineNumbers
	.long	0x60500020			# Characteristics (section flags)

#endif /* CONFIG_EFI_STUB */

	# Kernel attributes; used by setup.  This is part 1 of the
	# header, from the old boot sector.

	.section ".header", "a"
	.globl	hdr
hdr:
setup_sects:	.byte 0			/* Filled in by build.c */
root_flags:	.word ROOT_RDONLY
syssize:	.long 0			/* Filled in by build.c */
ram_size:	.word 0			/* Obsolete */
vid_mode:	.word SVGA_MODE
root_dev:	.word 0			/* Filled in by build.c */
boot_flag:	.word 0xAA55

	# offset 512, entry point

	.globl	_start
_start:
		# Explicitly enter this as bytes, or the assembler
		# tries to generate a 3-byte jump here, which causes
		# everything else to push off to the wrong offset.
		.byte	0xeb		# short (2-byte) jump
		.byte	start_of_setup-1f
1:

	# Part 2 of the header, from the old setup.S

		.ascii	"HdrS"		# header signature
		.word	0x020b		# header version number (>= 0x0105)
					# or else old loadlin-1.5 will fail)
		.globl realmode_swtch
realmode_swtch:	.word	0, 0		# default_switch, SETUPSEG
start_sys_seg:	.word	SYSSEG		# obsolete and meaningless, but just
					# in case something decided to "use" it
		.word	kernel_version-512 # pointing to kernel version string
					# above section of header is compatible
					# with loadlin-1.5 (header v1.5). Don't
					# change it.

type_of_loader:	.byte	0		# 0 means ancient bootloader, newer
					# bootloaders know to change this.
					# See Documentation/x86/boot.txt for
					# assigned ids

# flags, unused bits must be zero (RFU) bit within loadflags
loadflags:
LOADED_HIGH	= 1			# If set, the kernel is loaded high
CAN_USE_HEAP	= 0x80			# If set, the loader also has set
					# heap_end_ptr to tell how much
					# space behind setup.S can be used for
					# heap purposes.
					# Only the loader knows what is free
		.byte	LOADED_HIGH

setup_move_size: .word  0x8000		# size to move, when setup is not
					# loaded at 0x90000. We will move setup
					# to 0x90000 then just before jumping
					# into the kernel. However, only the
					# loader knows how much data behind
					# us also needs to be loaded.

code32_start:				# here loaders can put a different
					# start address for 32-bit code.
		.long	0x100000	# 0x100000 = default for big kernel

ramdisk_image:	.long	0		# address of loaded ramdisk image
					# Here the loader puts the 32-bit
					# address where it loaded the image.
					# This only will be read by the kernel.

ramdisk_size:	.long	0		# its size in bytes

bootsect_kludge:
		.long	0		# obsolete

heap_end_ptr:	.word	_end+STACK_SIZE-512
					# (Header version 0x0201 or later)
					# space from here (exclusive) down to
					# end of setup code can be used by setup
					# for local heap purposes.

ext_loader_ver:
		.byte	0		# Extended boot loader version
ext_loader_type:
		.byte	0		# Extended boot loader type

cmd_line_ptr:	.long	0		# (Header version 0x0202 or later)
					# If nonzero, a 32-bit pointer
					# to the kernel command line.
					# The command line should be
					# located between the start of
					# setup and the end of low
					# memory (0xa0000), or it may
					# get overwritten before it
					# gets read.  If this field is
					# used, there is no longer
					# anything magical about the
					# 0x90000 segment; the setup
					# can be located anywhere in
					# low memory 0x10000 or higher.

ramdisk_max:	.long 0x7fffffff
					# (Header version 0x0203 or later)
					# The highest safe address for
					# the contents of an initrd
					# The current kernel allows up to 4 GB,
					# but leave it at 2 GB to avoid
					# possible bootloader bugs.

kernel_alignment:  .long CONFIG_PHYSICAL_ALIGN	#physical addr alignment
						#required for protected mode
						#kernel
#ifdef CONFIG_RELOCATABLE
relocatable_kernel:    .byte 1
#else
relocatable_kernel:    .byte 0
#endif
min_alignment:		.byte MIN_KERNEL_ALIGN_LG2	# minimum alignment
pad3:			.word 0

cmdline_size:   .long   COMMAND_LINE_SIZE-1     #length of the command line,
                                                #added with boot protocol
                                                #version 2.06

hardware_subarch:	.long 0			# subarchitecture, added with 2.07
						# default to 0 for normal x86 PC

hardware_subarch_data:	.quad 0

payload_offset:		.long ZO_input_data
payload_length:		.long ZO_z_input_len

setup_data:		.quad 0			# 64-bit physical pointer to
						# single linked list of
						# struct setup_data

pref_address:		.quad LOAD_PHYSICAL_ADDR	# preferred load addr

#define ZO_INIT_SIZE	(ZO__end - ZO_startup_32 + ZO_z_extract_offset)
#define VO_INIT_SIZE	(VO__end - VO__text)
#if ZO_INIT_SIZE > VO_INIT_SIZE
#define INIT_SIZE ZO_INIT_SIZE
#else
#define INIT_SIZE VO_INIT_SIZE
#endif
init_size:		.long INIT_SIZE		# kernel initialization size
handover_offset:	.long 0x30		# offset to the handover
						# protocol entry point

# End of setup header #####################################################

	.section ".entrytext", "ax"
start_of_setup:
# Force %es = %ds
	movw	%ds, %ax
	movw	%ax, %es
	cld

# Apparently some ancient versions of LILO invoked the kernel with %ss != %ds,
# which happened to work by accident for the old code.  Recalculate the stack
# pointer if %ss is invalid.  Otherwise leave it alone, LOADLIN sets up the
# stack behind its own code, so we can't blindly put it directly past the heap.

	movw	%ss, %dx
	cmpw	%ax, %dx	# %ds == %ss?
	movw	%sp, %dx
	je	2f		# -> assume %sp is reasonably set

	# Invalid %ss, make up a new stack
	movw	$_end, %dx
	testb	$CAN_USE_HEAP, loadflags
	jz	1f
	movw	heap_end_ptr, %dx
1:	addw	$STACK_SIZE, %dx
	jnc	2f
	xorw	%dx, %dx	# Prevent wraparound

2:	# Now %dx should point to the end of our stack space
	andw	$~3, %dx	# dword align (might as well...)
	jnz	3f
	movw	$0xfffc, %dx	# Make sure we're not zero
3:	movw	%ax, %ss
	movzwl	%dx, %esp	# Clear upper half of %esp
	sti			# Now we should have a working stack

# We will have entered with %cs = %ds+0x20, normalize %cs so
# it is on par with the other segments.
	pushw	%ds
	pushw	$6f
	lretw
6:

# Check signature at end of setup
	cmpl	$0x5a5aaa55, setup_sig
	jne	setup_bad

# Zero the bss
	movw	$__bss_start, %di
	movw	$_end+3, %cx
	xorl	%eax, %eax
	subw	%di, %cx
	shrw	$2, %cx
	rep; stosl

# Jump to C code (should not return)
	calll	main

# Setup corrupt somehow...
setup_bad:
	movl	$setup_corrupt, %eax
	calll	puts
	# Fall through...

	.globl	die
	.type	die, @function
die:
	hlt
	jmp	die

	.size	die, .-die

	.section ".initdata", "a"
setup_corrupt:
	.byte	7
	.string	"No setup signature found...\n"

	.data
dummy:	.long	0