Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/m68k/Makefile

161 lines
5.2 KiB
Makefile
Raw Normal View History

m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
#
# m68k/Makefile
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" and "archdep" for cleaning up and making dependencies for
# this architecture
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Hamish Macdonald
# Copyright (C) 2002,2011 Greg Ungerer <gerg@snapgear.com>
#
m68k: make multi_defconfig the default defconfig It seems to match the intention behind multi_defconfig to make it the default defconfig. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-17 13:16:14 -06:00
KBUILD_DEFCONFIG := multi_defconfig
m68k: use KBUILD_DEFCONFIG The default defconfig should be one from arch/m68k/configs/ arch/m68k/defconfig was not exactly identical to amiga_defconfig but also considering how long they have been without any update that doesn't seem to have been on purpose. Signed-off-by: Adrian Bunk <adrian.bunk@movial.fi> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-04 06:57:38 -06:00
m68k: Setup CROSS_COMPILE at the top CROSS_COMPILE must be setup before using e.g. cc-option (and a few other as-*, cc-*, ld-* macros), else they will check against the wrong compiler when cross-compiling, and may invoke the cross compiler with wrong or suboptimal compiler options. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer<gerg@uclinux.org>
2012-05-12 14:14:36 -06:00
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, \
m68k-linux-gnu- m68k-linux- m68k-unknown-linux-gnu-)
endif
endif
m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
#
# Enable processor type. Ordering of these is important - we want to
# use the minimum processor type of the range we support. The logic
# for 680x0 will only allow use of the -m68060 or -m68040 if no other
# 680x0 type is specified - and no option is specified for 68030 or
# 68020. The other m68k/ColdFire types always specify some type of
# compiler cpu type flag.
#
ifndef CONFIG_M68040
cpuflags-$(CONFIG_M68060) := -m68060
endif
ifndef CONFIG_M68060
cpuflags-$(CONFIG_M68040) := -m68040
endif
cpuflags-$(CONFIG_M68030) :=
cpuflags-$(CONFIG_M68020) :=
cpuflags-$(CONFIG_M68360) := -m68332
cpuflags-$(CONFIG_M68000) := -m68000
m68knommu: Add support for the Coldfire m5441x. Add support for the Coldfire 5441x (54410/54415/54416/54417/54418). Currently we only support noMMU mode. It requires the PIT patch posted previously as it uses the PIT instead of the dma timer as a clock source so we can get all that GENERIC_CLOCKEVENTS goodness. It also adds some simple clk definitions and very simple minded power management. The gpio code is tweeked and some additional devices are added to devices.c. The Makefile uses -mv4e as apparently, the only difference a v4m (m5441x) and a v4e is the later has a FPU, which I don't think should matter to us in the kernel. Signed-off-by: Steven King <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-06 15:28:31 -06:00
cpuflags-$(CONFIG_M5441x) := $(call cc-option,-mcpu=54455,-mcfv4e)
m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
cpuflags-$(CONFIG_M54xx) := $(call cc-option,-mcpu=5475,-m5200)
cpuflags-$(CONFIG_M5407) := $(call cc-option,-mcpu=5407,-m5200)
cpuflags-$(CONFIG_M532x) := $(call cc-option,-mcpu=532x,-m5307)
cpuflags-$(CONFIG_M5307) := $(call cc-option,-mcpu=5307,-m5200)
cpuflags-$(CONFIG_M528x) := $(call cc-option,-mcpu=528x,-m5307)
cpuflags-$(CONFIG_M5275) := $(call cc-option,-mcpu=5275,-m5307)
cpuflags-$(CONFIG_M5272) := $(call cc-option,-mcpu=5272,-m5307)
cpuflags-$(CONFIG_M5271) := $(call cc-option,-mcpu=5271,-m5307)
cpuflags-$(CONFIG_M523x) := $(call cc-option,-mcpu=523x,-m5307)
m68knommu: Add support for the Coldfire 5251/5253 Basic support for the Coldfire 5251/5253. Signed-off-by: Steven king <sfking@fdwdc.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-06-05 09:23:08 -06:00
cpuflags-$(CONFIG_M525x) := $(call cc-option,-mcpu=5253,-m5200)
m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
cpuflags-$(CONFIG_M5249) := $(call cc-option,-mcpu=5249,-m5200)
cpuflags-$(CONFIG_M520x) := $(call cc-option,-mcpu=5208,-m5200)
cpuflags-$(CONFIG_M5206e) := $(call cc-option,-mcpu=5206e,-m5200)
cpuflags-$(CONFIG_M5206) := $(call cc-option,-mcpu=5206,-m5200)
KBUILD_AFLAGS += $(cpuflags-y)
KBUILD_CFLAGS += $(cpuflags-y) -pipe
m68k: merge m68k and m68knommu arch directories There is a lot of common code that could be shared between the m68k and m68knommu arch branches. It makes sense to merge the two branches into a single directory structure so that we can more easily share that common code. This is a brute force merge, based on a script from Stephen King <sfking@fdwdc.com>, which was originally written by Arnd Bergmann <arnd@arndb.de>. > The script was inspired by the script Sam Ravnborg used to merge the > includes from m68knommu. For those files common to both arches but > differing in content, the m68k version of the file is renamed to > <file>_mm.<ext> and the m68knommu version of the file is moved into the > corresponding m68k directory and renamed <file>_no.<ext> and a small > wrapper file <file>.<ext> is used to select between the two version. Files > that are common to both but don't differ are removed from the m68knommu > tree and files and directories that are unique to the m68knommu tree are > moved to the m68k tree. Finally, the arch/m68knommu tree is removed. > > To select between the the versions of the files, the wrapper uses > > #ifdef CONFIG_MMU > #include <file>_mm.<ext> > #else > #include <file>_no.<ext> > #endif On top of this file merge I have done a simplistic merge of m68k and m68knommu Kconfig, which primarily attempts to keep existing options and menus in place. Other than a handful of options being moved it produces identical .config outputs on m68k and m68knommu targets I tested it on. With this in place there is now quite a bit of scope for merge cleanups in future patches. Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2011-03-21 21:39:27 -06:00
ifdef CONFIG_MMU
m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
# without -fno-strength-reduce the 53c7xx.c driver fails ;-(
KBUILD_CFLAGS += -fno-strength-reduce -ffixed-a2
else
# we can use a m68k-linux-gcc toolchain with these in place
KBUILD_CFLAGS += -DUTS_SYSNAME=\"uClinux\"
KBUILD_CFLAGS += -D__uClinux__
KBUILD_AFLAGS += -D__uClinux__
endif
LDFLAGS := -m m68kelf
KBUILD_LDFLAGS_MODULE += -T $(srctree)/arch/m68k/kernel/module.lds
ifdef CONFIG_SUN3
LDFLAGS_vmlinux = -N
endif
CHECKFLAGS += -D__mc68000__
ifdef CONFIG_KGDB
# If configured for kgdb support, include debugging infos and keep the
# frame pointer
KBUILD_CFLAGS := $(subst -fomit-frame-pointer,,$(KBUILD_CFLAGS)) -g
endif
#
# Select the assembler head startup code. Order is important. The default
# head code is first, processor specific selections can override it after.
#
head-y := arch/m68k/kernel/head.o
head-$(CONFIG_SUN3) := arch/m68k/kernel/sun3-head.o
head-$(CONFIG_M68360) := arch/m68k/platform/68360/head.o
m68knommu: platform code merge for 68000 core cpus This patch merges all 68000 core cpus into one directory. There is a lot of common code in the 68328, 68EZ328 and 68VZ328 directories. This will also facilitate easy development of support for original stand alone MC68000 CPU machines. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-04 16:04:49 -07:00
head-$(CONFIG_M68000) := arch/m68k/platform/68000/head.o
m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
head-$(CONFIG_COLDFIRE) := arch/m68k/platform/coldfire/head.o
core-y += arch/m68k/kernel/ arch/m68k/mm/
libs-y += arch/m68k/lib/
core-$(CONFIG_Q40) += arch/m68k/q40/
core-$(CONFIG_AMIGA) += arch/m68k/amiga/
core-$(CONFIG_ATARI) += arch/m68k/atari/
core-$(CONFIG_MAC) += arch/m68k/mac/
core-$(CONFIG_HP300) += arch/m68k/hp300/
core-$(CONFIG_APOLLO) += arch/m68k/apollo/
core-$(CONFIG_MVME147) += arch/m68k/mvme147/
core-$(CONFIG_MVME16x) += arch/m68k/mvme16x/
core-$(CONFIG_BVME6000) += arch/m68k/bvme6000/
core-$(CONFIG_SUN3X) += arch/m68k/sun3x/ arch/m68k/sun3/
core-$(CONFIG_SUN3) += arch/m68k/sun3/ arch/m68k/sun3/prom/
core-$(CONFIG_NATFEAT) += arch/m68k/emu/
core-$(CONFIG_M68040) += arch/m68k/fpsp040/
core-$(CONFIG_M68060) += arch/m68k/ifpsp060/
core-$(CONFIG_M68KFPU_EMU) += arch/m68k/math-emu/
core-$(CONFIG_M68360) += arch/m68k/platform/68360/
m68knommu: platform code merge for 68000 core cpus This patch merges all 68000 core cpus into one directory. There is a lot of common code in the 68328, 68EZ328 and 68VZ328 directories. This will also facilitate easy development of support for original stand alone MC68000 CPU machines. Signed-off-by: Luis Alves <ljalvs@gmail.com> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
2012-12-04 16:04:49 -07:00
core-$(CONFIG_M68000) += arch/m68k/platform/68000/
m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
core-$(CONFIG_COLDFIRE) += arch/m68k/platform/coldfire/
all: zImage
lilo: vmlinux
if [ -f $(INSTALL_PATH)/vmlinux ]; then mv -f $(INSTALL_PATH)/vmlinux $(INSTALL_PATH)/vmlinux.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv -f $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
cat vmlinux > $(INSTALL_PATH)/vmlinux
cp System.map $(INSTALL_PATH)/System.map
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
zImage compressed: vmlinux.gz
vmlinux.gz: vmlinux
ifndef CONFIG_KGDB
cp vmlinux vmlinux.tmp
$(STRIP) vmlinux.tmp
gzip -9c vmlinux.tmp >vmlinux.gz
rm vmlinux.tmp
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
else
m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
gzip -9c vmlinux >vmlinux.gz
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
endif
m68k: merge mmu and non-mmu arch Makefiles Most of the build logic is the same for the mmu and non-mmu m68k targets. Merge the top level architecture Makefiles back into a single Makefile. For the most part this is just adding the non-mmu processor types and their specific cflags and other options into the mmu Makefile. Note that all the BOARD setting logic that was in the non-mmu Makefile is completely removed. It was no longer being used at all. This has been build and run tested on ColdFire targets and ARAnyM. It has been build tested on all the m68k defconfig targets using a gcc-4.5.1 based toolchain. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-06-20 22:03:30 -06:00
bzImage: vmlinux.bz2
vmlinux.bz2: vmlinux
ifndef CONFIG_KGDB
cp vmlinux vmlinux.tmp
$(STRIP) vmlinux.tmp
bzip2 -1c vmlinux.tmp >vmlinux.bz2
rm vmlinux.tmp
else
bzip2 -1c vmlinux >vmlinux.bz2
endif
archclean:
rm -f vmlinux.gz vmlinux.bz2
install:
sh $(srctree)/arch/m68k/install.sh $(KERNELRELEASE) vmlinux.gz System.map "$(INSTALL_PATH)"
Reference in a new issue Copy permalink