Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/sh/drivers/pci/Makefile

28 lines
1.2 KiB
Makefile
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#
# Makefile for the PCI specific kernel interface routines under Linux.
#
sh: Enable PCI66 support for SH7780 host controller. This adds some helper glue for scanning the bus and determining if all of the devices are 66MHz capable or not before flipping on 66MHz mode. This isn't quite to spec, but it's fairly consistent with what other embedded controllers end up having to do. Scanning code cribbed from the MIPS txx9 PCI code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-31 21:01:42 -07:00
obj-y += common.o pci.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sh: Consolidated SH7751/SH7780 PCI support. This cleans up quite a lot of the PCI mess that we currently have, and attempts to consolidate the duplication in the SH7780 and SH7751 PCI controllers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 01:43:28 -06:00
obj-$(CONFIG_CPU_SUBTYPE_SH7751) += pci-sh7751.o ops-sh4.o
sh: update r2d defconfig and fix SH7751R pci compliation This patch updates the r2d board support in a few ways: - CPU_SUBTYPE_SH7751R is selected in the defconfig to play well with the r2d board Kconfig entry. Without this the defconfig results in no board enabled. - Enable EARLY_PRINTK. - Enable SH_STANDARD_BIOS - this works well for early printk on the r2d board. - Add "earlyprink=bios" to the cmdline for early serial port output by default. - CONFIG_SUBTYPE_SH7751R support is added to the sh-specific pci makefile. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-20 02:25:48 -06:00
obj-$(CONFIG_CPU_SUBTYPE_SH7751R) += pci-sh7751.o ops-sh4.o
sh: Add support for SH7763 CPU subtype. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-06 22:40:07 -07:00
obj-$(CONFIG_CPU_SUBTYPE_SH7763) += pci-sh7780.o ops-sh4.o
sh: Consolidated SH7751/SH7780 PCI support. This cleans up quite a lot of the PCI mess that we currently have, and attempts to consolidate the duplication in the SH7780 and SH7751 PCI controllers. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 01:43:28 -06:00
obj-$(CONFIG_CPU_SUBTYPE_SH7780) += pci-sh7780.o ops-sh4.o
sh: Add SH7785 Highlander board support (R7785RP). This adds preliminary support for the SH7785-based Highlander board. Some of the Highlander support code is reordered so that most of it can be reused directly. This also plugs in missing SH7785 checks in the places that need it, as this is the first board to support the CPU. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-03-11 23:38:59 -06:00
obj-$(CONFIG_CPU_SUBTYPE_SH7785) += pci-sh7780.o ops-sh4.o
sh: Generalize SH7786 PCIe support. Previously this was only built in for Urquell boards, but the same approach can be used on SDK7786 now that the mode pin reading is supported, so make it generic to SH7786. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 03:13:56 -07:00
obj-$(CONFIG_CPU_SUBTYPE_SH7786) += pcie-sh7786.o ops-sh7786.o
sh: Get the SH-5 PCI support building. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-22 00:29:10 -07:00
obj-$(CONFIG_CPU_SH5) += pci-sh5.o ops-sh5.o
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sh: pci: Tidy up the dreamcast PCI support. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 05:22:05 -06:00
obj-$(CONFIG_SH_DREAMCAST) += ops-dreamcast.o fixups-dreamcast.o \
pci-dreamcast.o
sh: pci: Rename SH7751 platform ops files to fixups. None of these contain pci_ops, only IRQ routing bits, rename them accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 06:17:10 -06:00
obj-$(CONFIG_SH_SECUREEDGE5410) += fixups-snapgear.o
sh: pci: Move the se7751 fixups in to arch/sh/drivers/pci/. The se7751 was still doing the PCI fixups in its own board directory, so we move it over to arch/sh/drivers/pci/ with the rest of the board fixups. It has bitrotted significantly over the years, so will still likely need a bit of work to bring back up to date. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 06:42:59 -06:00
obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += fixups-se7751.o
sh: pci: Consolidate lboxre2 and r2d IRQ fixups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 06:27:15 -06:00
obj-$(CONFIG_SH_RTS7751R2D) += fixups-rts7751r2d.o
sh: pci: Rewrite SH7751 PCI support to follow SH7780. This follows the similar sort of scheme that the refactored SH7780 code uses, using a 64MB CS3 mapping to handle the window0 case, and simply discarding window1. This vastly simplifies the code, and allows most of the board-specific setup to go die. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 06:11:07 -06:00
obj-$(CONFIG_SH_SH03) += fixups-sh03.o
sh: pci: Consolidate SH7780 PCIC IRQ routing. Now that the platform code is a bit leaner, we can start consolidating the various IRQ routing implementations. There are effectively only 2 variants, and the others can use those directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-17 05:11:44 -06:00
obj-$(CONFIG_SH_HIGHLANDER) += fixups-r7780rp.o
obj-$(CONFIG_SH_SH7785LCR) += fixups-r7780rp.o
obj-$(CONFIG_SH_SDK7780) += fixups-sdk7780.o
obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += fixups-sdk7780.o
sh: pci: Rename SH7751 platform ops files to fixups. None of these contain pci_ops, only IRQ routing bits, rename them accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 06:17:10 -06:00
obj-$(CONFIG_SH_TITAN) += fixups-titan.o
obj-$(CONFIG_SH_LANDISK) += fixups-landisk.o
sh: pci: Consolidate lboxre2 and r2d IRQ fixups. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 06:27:15 -06:00
obj-$(CONFIG_SH_LBOX_RE2) += fixups-rts7751r2d.o
sh: pci: Rename ops-cayman -> fixups-cayman. Now that ops-cayman.c only contains IRQ routing fixups, rename it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-20 05:41:45 -06:00
obj-$(CONFIG_SH_CAYMAN) += fixups-cayman.o
Reference in a new issue Copy permalink