Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/sparc64/kernel/rtrap.S

437 lines
11 KiB
ArmAsm
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* $Id: rtrap.S,v 1.61 2002/02/09 19:49:31 davem Exp $
* rtrap.S: Preparing for return from trap on Sparc V9.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
*/
#include <asm/asi.h>
#include <asm/pstate.h>
#include <asm/ptrace.h>
#include <asm/spitfire.h>
#include <asm/head.h>
#include <asm/visasm.h>
#include <asm/processor.h>
#define RTRAP_PSTATE (PSTATE_RMO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE)
#define RTRAP_PSTATE_IRQOFF (PSTATE_RMO|PSTATE_PEF|PSTATE_PRIV)
#define RTRAP_PSTATE_AG_IRQOFF (PSTATE_RMO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG)
.text
.align 32
__handle_softirq:
call do_softirq
nop
ba,a,pt %xcc, __handle_softirq_continue
nop
__handle_preemption:
call schedule
wrpr %g0, RTRAP_PSTATE, %pstate
ba,pt %xcc, __handle_preemption_continue
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
__handle_user_windows:
call fault_in_user_windows
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
/* Redo sched+sig checks */
ldx [%g6 + TI_FLAGS], %l0
andcc %l0, _TIF_NEED_RESCHED, %g0
be,pt %xcc, 1f
nop
call schedule
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
[SPARC]: Add support for *at(), ppoll, and pselect syscalls. This also includes by necessity _TIF_RESTORE_SIGMASK support, which actually resulted in a lot of cleanups. The sparc signal handling code is quite a mess and I should clean it up some day. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-19 03:42:49 -07:00
1: andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
be,pt %xcc, __handle_user_windows_continue
nop
[SPARC]: Add support for *at(), ppoll, and pselect syscalls. This also includes by necessity _TIF_RESTORE_SIGMASK support, which actually resulted in a lot of cleanups. The sparc signal handling code is quite a mess and I should clean it up some day. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-19 03:42:49 -07:00
mov %l5, %o1
add %sp, PTREGS_OFF, %o0
[SPARC64]: %l6 trap return handling no longer necessary. Now that we indicate the "restart system call" in the trap type field of pt_regs->magic, we don't need to set the %l6 boolean in all of the trap return paths. And we therefore don't need to pass it to do_notify_resume(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 04:15:22 -06:00
mov %l0, %o2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
call do_notify_resume
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
/* Signal delivery can modify pt_regs tstate, so we must
* reload it.
*/
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
ba,pt %xcc, __handle_user_windows_continue
andn %l1, %l4, %l1
__handle_perfctrs:
call update_perfctrs
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldub [%g6 + TI_WSAVED], %o2
brz,pt %o2, 1f
nop
/* Redo userwin+sched+sig checks */
call fault_in_user_windows
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
andcc %l0, _TIF_NEED_RESCHED, %g0
be,pt %xcc, 1f
nop
call schedule
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
[SPARC]: Add support for *at(), ppoll, and pselect syscalls. This also includes by necessity _TIF_RESTORE_SIGMASK support, which actually resulted in a lot of cleanups. The sparc signal handling code is quite a mess and I should clean it up some day. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-19 03:42:49 -07:00
1: andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
be,pt %xcc, __handle_perfctrs_continue
sethi %hi(TSTATE_PEF), %o0
[SPARC]: Add support for *at(), ppoll, and pselect syscalls. This also includes by necessity _TIF_RESTORE_SIGMASK support, which actually resulted in a lot of cleanups. The sparc signal handling code is quite a mess and I should clean it up some day. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-19 03:42:49 -07:00
mov %l5, %o1
add %sp, PTREGS_OFF, %o0
[SPARC64]: %l6 trap return handling no longer necessary. Now that we indicate the "restart system call" in the trap type field of pt_regs->magic, we don't need to set the %l6 boolean in all of the trap return paths. And we therefore don't need to pass it to do_notify_resume(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 04:15:22 -06:00
mov %l0, %o2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
call do_notify_resume
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
/* Signal delivery can modify pt_regs tstate, so we must
* reload it.
*/
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
andn %l1, %l4, %l1
ba,pt %xcc, __handle_perfctrs_continue
sethi %hi(TSTATE_PEF), %o0
__handle_userfpu:
rd %fprs, %l5
andcc %l5, FPRS_FEF, %g0
sethi %hi(TSTATE_PEF), %o0
be,a,pn %icc, __handle_userfpu_continue
andn %l1, %o0, %l1
ba,a,pt %xcc, __handle_userfpu_continue
__handle_signal:
[SPARC]: Add support for *at(), ppoll, and pselect syscalls. This also includes by necessity _TIF_RESTORE_SIGMASK support, which actually resulted in a lot of cleanups. The sparc signal handling code is quite a mess and I should clean it up some day. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-19 03:42:49 -07:00
mov %l5, %o1
add %sp, PTREGS_OFF, %o0
[SPARC64]: %l6 trap return handling no longer necessary. Now that we indicate the "restart system call" in the trap type field of pt_regs->magic, we don't need to set the %l6 boolean in all of the trap return paths. And we therefore don't need to pass it to do_notify_resume(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 04:15:22 -06:00
mov %l0, %o2
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
call do_notify_resume
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
/* Signal delivery can modify pt_regs tstate, so we must
* reload it.
*/
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
ba,pt %xcc, __handle_signal_continue
andn %l1, %l4, %l1
.align 64
[SPARC64]: %l6 trap return handling no longer necessary. Now that we indicate the "restart system call" in the trap type field of pt_regs->magic, we don't need to set the %l6 boolean in all of the trap return paths. And we therefore don't need to pass it to do_notify_resume(). Signed-off-by: David S. Miller <davem@davemloft.net>
2008-04-24 04:15:22 -06:00
.globl rtrap_irq, rtrap, irqsz_patchme, rtrap_xcall
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
rtrap_irq:
rtrap:
[SPARC64]: Eliminate irq_cpustat_t. We can put the __softirq_pending mask in the cpudata, no need for the silly NR_CPUS array in kernel/softirq.c Signed-off-by: David S. Miller <davem@davemloft.net>
2005-08-29 23:46:43 -06:00
#ifndef CONFIG_SMP
sethi %hi(per_cpu____cpu_data), %l0
lduw [%l0 + %lo(per_cpu____cpu_data)], %l1
#else
sethi %hi(per_cpu____cpu_data), %l0
or %l0, %lo(per_cpu____cpu_data), %l0
lduw [%l0 + %g5], %l1
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
cmp %l1, 0
/* mm/ultra.S:xcall_report_regs KNOWS about this load. */
bne,pn %icc, __handle_softirq
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
__handle_softirq_continue:
rtrap_xcall:
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 14:38:57 -07:00
andn %l1, %l4, %l1
srl %l4, 20, %l4
#ifdef CONFIG_TRACE_IRQFLAGS
brnz,pn %l4, rtrap_no_irq_enable
nop
call trace_hardirqs_on
nop
wrpr %l4, %pil
rtrap_no_irq_enable:
#endif
andcc %l1, TSTATE_PRIV, %l3
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
bne,pn %icc, to_kernel
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 14:38:57 -07:00
nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* We must hold IRQs off and atomically test schedule+signal
* state, then hold them off all the way back to userspace.
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 14:38:57 -07:00
* If we are returning to kernel, none of this matters. Note
* that we are disabling interrupts via PSTATE_IE, not using
* %pil.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* If we do not do this, there is a window where we would do
* the tests, later the signal/resched event arrives but we do
* not process it since we are still in kernel mode. It would
* take until the next local IRQ before the signal/resched
* event would be handled.
*
* This also means that if we have to deal with performance
* counters or user windows, we have to redo all of these
* sched+signal checks with IRQs disabled.
*/
to_user: wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
wrpr 0, %pil
__handle_preemption_continue:
ldx [%g6 + TI_FLAGS], %l0
sethi %hi(_TIF_USER_WORK_MASK), %o0
or %o0, %lo(_TIF_USER_WORK_MASK), %o0
andcc %l0, %o0, %g0
sethi %hi(TSTATE_PEF), %o0
be,pt %xcc, user_nowork
andcc %l1, %o0, %g0
andcc %l0, _TIF_NEED_RESCHED, %g0
bne,pn %xcc, __handle_preemption
[SPARC]: Add support for *at(), ppoll, and pselect syscalls. This also includes by necessity _TIF_RESTORE_SIGMASK support, which actually resulted in a lot of cleanups. The sparc signal handling code is quite a mess and I should clean it up some day. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-19 03:42:49 -07:00
andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
bne,pn %xcc, __handle_signal
__handle_signal_continue:
ldub [%g6 + TI_WSAVED], %o2
brnz,pn %o2, __handle_user_windows
nop
__handle_user_windows_continue:
ldx [%g6 + TI_FLAGS], %l5
andcc %l5, _TIF_PERFCTR, %g0
sethi %hi(TSTATE_PEF), %o0
bne,pn %xcc, __handle_perfctrs
__handle_perfctrs_continue:
andcc %l1, %o0, %g0
/* This fpdepth clear is necessary for non-syscall rtraps only */
user_nowork:
bne,pn %xcc, __handle_userfpu
stb %g0, [%g6 + TI_FPDEPTH]
__handle_userfpu_continue:
rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1
ldx [%sp + PTREGS_OFF + PT_V9_G2], %g2
ldx [%sp + PTREGS_OFF + PT_V9_G3], %g3
ldx [%sp + PTREGS_OFF + PT_V9_G4], %g4
ldx [%sp + PTREGS_OFF + PT_V9_G5], %g5
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
brz,pt %l3, 1f
[SPARC64]: Kill all %pstate changes in context switch code. They are totally unnecessary because: 1) Interrupts are already disabled when switch_to() runs. 2) We don't use hard-coded alternate globals any longer. This found a case in rtrap, which still assumed alternate global %g6 was current_thread_info(), and that is fixed by this changeset as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 22:59:03 -07:00
mov %g6, %l2
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
/* Must do this before thread reg is clobbered below. */
[SPARC64]: Add explicit register args to trap state loading macros. This, as well as making the code cleaner, allows a simplification in the TSB miss handling path. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 22:55:10 -07:00
LOAD_PER_CPU_BASE(%g5, %g6, %i0, %i1, %i2)
[SPARC64]: Move away from virtual page tables, part 1. We now use the TSB hardware assist features of the UltraSPARC MMUs. SMP is currently knowingly broken, we need to find another place to store the per-cpu base pointers. We hid them away in the TSB base register, and that obviously will not work any more :-) Another known broken case is non-8KB base page size. Also noticed that flush_tlb_all() is not referenced anywhere, only the internal __flush_tlb_all() (local cpu only) is used by the sparc64 port, so we can get rid of flush_tlb_all(). The kernel gets it's own 8KB TSB (swapper_tsb) and each address space gets it's own private 8K TSB. Later we can add code to dynamically increase the size of per-process TSB as the RSS grows. An 8KB TSB is good enough for up to about a 4MB RSS, after which the TSB starts to incur many capacity and conflict misses. We even accumulate OBP translations into the kernel TSB. Another area for refinement is large page size support. We could use a secondary address space TSB to handle those. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:29:18 -07:00
1:
ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7
[SPARC64]: Add initial code to twiddle %gl on trap entry/exit. Instead of setting/clearing PSTATE_AG we have to change the %gl register value on sun4v. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 22:29:28 -07:00
/* Normal globals are restored, go to trap globals. */
661: wrpr %g0, RTRAP_PSTATE_AG_IRQOFF, %pstate
[SPARC64]: Fix return from trap on SUN4V. We need to set the global register set _AND_ disable PSTATE_IE in %pstate. The original patch sequence was leaving PSTATE_IE enabled when returning to kernel mode, oops. This fixes the random register corruption being seen on SUN4V. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-16 17:23:45 -07:00
nop
.section .sun4v_2insn_patch, "ax"
[SPARC64]: Add initial code to twiddle %gl on trap entry/exit. Instead of setting/clearing PSTATE_AG we have to change the %gl register value on sun4v. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 22:29:28 -07:00
.word 661b
[SPARC64]: Fix return from trap on SUN4V. We need to set the global register set _AND_ disable PSTATE_IE in %pstate. The original patch sequence was leaving PSTATE_IE enabled when returning to kernel mode, oops. This fixes the random register corruption being seen on SUN4V. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-16 17:23:45 -07:00
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
[SPARC64]: Add initial code to twiddle %gl on trap entry/exit. Instead of setting/clearing PSTATE_AG we have to change the %gl register value on sun4v. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 22:29:28 -07:00
SET_GL(1)
.previous
[SPARC64]: Kill all %pstate changes in context switch code. They are totally unnecessary because: 1) Interrupts are already disabled when switch_to() runs. 2) We don't use hard-coded alternate globals any longer. This found a case in rtrap, which still assumed alternate global %g6 was current_thread_info(), and that is fixed by this changeset as well. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 22:59:03 -07:00
mov %l2, %g6
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ldx [%sp + PTREGS_OFF + PT_V9_I0], %i0
ldx [%sp + PTREGS_OFF + PT_V9_I1], %i1
ldx [%sp + PTREGS_OFF + PT_V9_I2], %i2
ldx [%sp + PTREGS_OFF + PT_V9_I3], %i3
ldx [%sp + PTREGS_OFF + PT_V9_I4], %i4
ldx [%sp + PTREGS_OFF + PT_V9_I5], %i5
ldx [%sp + PTREGS_OFF + PT_V9_I6], %i6
ldx [%sp + PTREGS_OFF + PT_V9_I7], %i7
ldx [%sp + PTREGS_OFF + PT_V9_TPC], %l2
ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %o2
ld [%sp + PTREGS_OFF + PT_V9_Y], %o3
wr %o3, %g0, %y
wrpr %l4, 0x0, %pil
wrpr %g0, 0x1, %tl
wrpr %l1, %g0, %tstate
wrpr %l2, %g0, %tpc
wrpr %o2, %g0, %tnpc
brnz,pn %l3, kern_rtt
mov PRIMARY_CONTEXT, %l7
[SPARC64]: Patch up mmu context register writes for sun4v. sun4v uses ASI_MMU instead of ASI_DMMU Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:13:05 -07:00
661: ldxa [%l7 + %l7] ASI_DMMU, %l0
.section .sun4v_1insn_patch, "ax"
.word 661b
ldxa [%l7 + %l7] ASI_MMU, %l0
.previous
[SPARC64]: Replace cheetah+ code patching with variables. Instead of code patching to handle the page size fields in the context registers, just use variables from which we get the proper values. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-04 16:23:20 -06:00
sethi %hi(sparc64_kern_pri_nuc_bits), %l1
ldx [%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
or %l0, %l1, %l0
[SPARC64]: Patch up mmu context register writes for sun4v. sun4v uses ASI_MMU instead of ASI_DMMU Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:13:05 -07:00
661: stxa %l0, [%l7] ASI_DMMU
.section .sun4v_1insn_patch, "ax"
.word 661b
stxa %l0, [%l7] ASI_MMU
.previous
[SPARC64]: Fix bogus flush instruction usage. Some of the trap code was still assuming that alternate global %g6 was hard coded with current_thread_info(). Let's just consistently flush at KERNBASE when we need a pipeline synchronization. That's locked into the TLB and will always work. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-31 19:33:00 -07:00
sethi %hi(KERNBASE), %l7
flush %l7
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
rdpr %wstate, %l1
rdpr %otherwin, %l2
srl %l1, 3, %l1
wrpr %l2, %g0, %canrestore
wrpr %l1, %g0, %wstate
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
brnz,pt %l2, user_rtt_restore
wrpr %g0, %g0, %otherwin
ldx [%g6 + TI_FLAGS], %g3
wr %g0, ASI_AIUP, %asi
rdpr %cwp, %g1
andcc %g3, _TIF_32BIT, %g0
sub %g1, 1, %g1
bne,pt %xcc, user_rtt_fill_32bit
wrpr %g1, %cwp
ba,a,pt %xcc, user_rtt_fill_64bit
user_rtt_fill_fixup:
rdpr %cwp, %g1
add %g1, 1, %g1
wrpr %g1, 0x0, %cwp
rdpr %wstate, %g2
sll %g2, 3, %g2
wrpr %g2, 0x0, %wstate
/* We know %canrestore and %otherwin are both zero. */
sethi %hi(sparc64_kern_pri_context), %g2
ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2
mov PRIMARY_CONTEXT, %g1
[SPARC64]: Patch up mmu context register writes for sun4v. sun4v uses ASI_MMU instead of ASI_DMMU Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 23:13:05 -07:00
661: stxa %g2, [%g1] ASI_DMMU
.section .sun4v_1insn_patch, "ax"
.word 661b
stxa %g2, [%g1] ASI_MMU
.previous
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
sethi %hi(KERNBASE), %g1
flush %g1
or %g4, FAULT_CODE_WINFIXUP, %g4
stb %g4, [%g6 + TI_FAULT_CODE]
stx %g5, [%g6 + TI_FAULT_ADDR]
mov %g6, %l1
wrpr %g0, 0x0, %tl
[SPARC64]: Add initial code to twiddle %gl on trap entry/exit. Instead of setting/clearing PSTATE_AG we have to change the %gl register value on sun4v. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 22:29:28 -07:00
661: nop
[SPARC64]: Rename gl_{1,2}insn_patch --> sun4v_{1,2}insn_patch Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-07 01:00:16 -07:00
.section .sun4v_1insn_patch, "ax"
[SPARC64]: Add initial code to twiddle %gl on trap entry/exit. Instead of setting/clearing PSTATE_AG we have to change the %gl register value on sun4v. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-05 22:29:28 -07:00
.word 661b
SET_GL(0)
.previous
[SPARC64]: Drop %gl to 0 before re-enabling PSTATE_IE in rtrap If we take a window fault, on SUN4V set %gl to zero before we turn PSTATE_IE back on in %pstate. Otherwise if we take an interrupt we'll end up with corrupt register state. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-22 17:15:45 -07:00
wrpr %g0, RTRAP_PSTATE, %pstate
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
mov %l1, %g6
ldx [%g6 + TI_TASK], %g4
LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3)
call do_sparc64_fault
add %sp, PTREGS_OFF, %o0
ba,pt %xcc, rtrap
nop
user_rtt_pre_restore:
add %g1, 1, %g1
wrpr %g1, 0x0, %cwp
user_rtt_restore:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
restore
rdpr %canrestore, %g1
wrpr %g1, 0x0, %cleanwin
retry
nop
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
kern_rtt: rdpr %canrestore, %g1
brz,pn %g1, kern_rtt_fill
nop
kern_rtt_restore:
restore
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
retry
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
to_kernel:
#ifdef CONFIG_PREEMPT
ldsw [%g6 + TI_PRE_COUNT], %l5
brnz %l5, kern_fpucheck
ldx [%g6 + TI_FLAGS], %l5
andcc %l5, _TIF_NEED_RESCHED, %g0
be,pt %xcc, kern_fpucheck
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 14:38:57 -07:00
nop
cmp %l4, 0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
bne,pn %xcc, kern_fpucheck
sethi %hi(PREEMPT_ACTIVE), %l6
stw %l6, [%g6 + TI_PRE_COUNT]
call schedule
nop
ba,pt %xcc, rtrap
stw %g0, [%g6 + TI_PRE_COUNT]
#endif
kern_fpucheck: ldub [%g6 + TI_FPDEPTH], %l5
brz,pt %l5, rt_continue
srl %l5, 1, %o0
add %g6, TI_FPSAVED, %l6
ldub [%l6 + %o0], %l2
sub %l5, 2, %l5
add %g6, TI_GSR, %o1
andcc %l2, (FPRS_FEF|FPRS_DU), %g0
be,pt %icc, 2f
and %l2, FPRS_DL, %l6
andcc %l2, FPRS_FEF, %g0
be,pn %icc, 5f
sll %o0, 3, %o5
rd %fprs, %g1
wr %g1, FPRS_FEF, %fprs
ldx [%o1 + %o5], %g1
add %g6, TI_XFSR, %o1
sll %o0, 8, %o2
add %g6, TI_FPREGS, %o3
brz,pn %l6, 1f
add %g6, TI_FPREGS+0x40, %o4
[SPARC64]: Fix userland FPU state corruption. We need to use stricter memory barriers around the block load and store instructions we use to save and restore the FPU register file. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-07 14:30:49 -06:00
membar #Sync
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ldda [%o3 + %o2] ASI_BLK_P, %f0
ldda [%o4 + %o2] ASI_BLK_P, %f16
[SPARC64]: Fix userland FPU state corruption. We need to use stricter memory barriers around the block load and store instructions we use to save and restore the FPU register file. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-07 14:30:49 -06:00
membar #Sync
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
1: andcc %l2, FPRS_DU, %g0
be,pn %icc, 1f
wr %g1, 0, %gsr
add %o2, 0x80, %o2
[SPARC64]: Fix userland FPU state corruption. We need to use stricter memory barriers around the block load and store instructions we use to save and restore the FPU register file. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-07 14:30:49 -06:00
membar #Sync
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ldda [%o3 + %o2] ASI_BLK_P, %f32
ldda [%o4 + %o2] ASI_BLK_P, %f48
1: membar #Sync
ldx [%o1 + %o5], %fsr
2: stb %l5, [%g6 + TI_FPDEPTH]
ba,pt %xcc, rt_continue
nop
5: wr %g0, FPRS_FEF, %fprs
sll %o0, 8, %o2
add %g6, TI_FPREGS+0x80, %o3
add %g6, TI_FPREGS+0xc0, %o4
[SPARC64]: Fix userland FPU state corruption. We need to use stricter memory barriers around the block load and store instructions we use to save and restore the FPU register file. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-07 14:30:49 -06:00
membar #Sync
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ldda [%o3 + %o2] ASI_BLK_P, %f32
ldda [%o4 + %o2] ASI_BLK_P, %f48
membar #Sync
wr %g0, FPRS_DU, %fprs
ba,pt %xcc, rt_continue
stb %l5, [%g6 + TI_FPDEPTH]
Reference in a new issue Copy permalink