kernel-fxtec-pro1x/kernel/events/ring_buffer.c

872 lines
20 KiB
C
Raw Normal View History

/*
* Performance events ring-buffer code:
*
* Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
* Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar
* Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra
* Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
*
* For licensing details see kernel-base/COPYING
*/
#include <linux/perf_event.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/circ_buf.h>
#include <linux/poll.h>
#include "internal.h"
static void perf_output_wakeup(struct perf_output_handle *handle)
{
atomic_set(&handle->rb->poll, POLLIN);
handle->event->pending_wakeup = 1;
irq_work_queue(&handle->event->pending);
}
/*
* We need to ensure a later event_id doesn't publish a head when a former
* event isn't done writing. However since we need to deal with NMIs we
* cannot fully serialize things.
*
* We only publish the head (and generate a wakeup) when the outer-most
* event completes.
*/
static void perf_output_get_handle(struct perf_output_handle *handle)
{
struct ring_buffer *rb = handle->rb;
preempt_disable();
local_inc(&rb->nest);
handle->wakeup = local_read(&rb->wakeup);
}
static void perf_output_put_handle(struct perf_output_handle *handle)
{
struct ring_buffer *rb = handle->rb;
unsigned long head;
again:
head = local_read(&rb->head);
/*
* IRQ/NMI can happen here, which means we can miss a head update.
*/
if (!local_dec_and_test(&rb->nest))
goto out;
/*
* Since the mmap() consumer (userspace) can run on a different CPU:
*
* kernel user
*
* if (LOAD ->data_tail) { LOAD ->data_head
* (A) smp_rmb() (C)
* STORE $data LOAD $data
* smp_wmb() (B) smp_mb() (D)
* STORE ->data_head STORE ->data_tail
* }
*
* Where A pairs with D, and B pairs with C.
*
* In our case (A) is a control dependency that separates the load of
* the ->data_tail and the stores of $data. In case ->data_tail
* indicates there is no room in the buffer to store $data we do not.
*
* D needs to be a full barrier since it separates the data READ
* from the tail WRITE.
*
* For B a WMB is sufficient since it separates two WRITEs, and for C
* an RMB is sufficient since it separates two READs.
*
* See perf_output_begin().
*/
smp_wmb(); /* B, matches C */
rb->user_page->data_head = head;
/*
* Now check if we missed an update -- rely on previous implied
* compiler barriers to force a re-read.
*/
if (unlikely(head != local_read(&rb->head))) {
local_inc(&rb->nest);
goto again;
}
if (handle->wakeup != local_read(&rb->wakeup))
perf_output_wakeup(handle);
out:
preempt_enable();
}
perf/ring_buffer: Prepare writing into the ring-buffer from the end Convert perf_output_begin() to __perf_output_begin() and make the later function able to write records from the end of the ring-buffer. Following commits will utilize the 'backward' flag. This is the core patch to support writing to the ring-buffer backwards, which will be introduced by upcoming patches to support reading from overwritable ring-buffers. In theory, this patch should not introduce any extra performance overhead since we use always_inline, but it does not hurt to double check that assumption: When CONFIG_OPTIMIZE_INLINING is disabled, the output object is nearly identical to original one. See: http://lkml.kernel.org/g/56F52E83.70409@huawei.com When CONFIG_OPTIMIZE_INLINING is enabled, the resuling object file becomes smaller: $ size kernel/events/ring_buffer.o* text data bss dec hex filename 4641 4 8 4653 122d kernel/events/ring_buffer.o.old 4545 4 8 4557 11cd kernel/events/ring_buffer.o.new Performance testing results: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE 2253846.700 9997.014 POST 2257495.540 8516.293 Where 'BASE' is pure performance without capturing. 'PRE' is test result of pure 'v4.5.0' kernel. 'POST' is test result after this patch. Considering the stdvar, this patch doesn't hurt performance, within noise margin. For testing details, see: http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-4-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:31 -06:00
static bool __always_inline
ring_buffer_has_space(unsigned long head, unsigned long tail,
unsigned long data_size, unsigned int size,
bool backward)
{
if (!backward)
return CIRC_SPACE(head, tail, data_size) >= size;
else
return CIRC_SPACE(tail, head, data_size) >= size;
}
static int __always_inline
__perf_output_begin(struct perf_output_handle *handle,
struct perf_event *event, unsigned int size,
bool backward)
{
struct ring_buffer *rb;
unsigned long tail, offset, head;
int have_lost, page_shift;
struct {
struct perf_event_header header;
u64 id;
u64 lost;
} lost_event;
rcu_read_lock();
/*
* For inherited events we send all the output towards the parent.
*/
if (event->parent)
event = event->parent;
rb = rcu_dereference(event->rb);
if (unlikely(!rb))
goto out;
perf/ring_buffer: Introduce new ioctl options to pause and resume the ring-buffer Add new ioctl() to pause/resume ring-buffer output. In some situations we want to read from the ring-buffer only when we ensure nothing can write to the ring-buffer during reading. Without this patch we have to turn off all events attached to this ring-buffer to achieve this. This patch is a prerequisite to enable overwrite support for the perf ring-buffer support. Following commits will introduce new methods support reading from overwrite ring buffer. Before reading, caller must ensure the ring buffer is frozen, or the reading is unreliable. Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-2-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:29 -06:00
if (unlikely(rb->paused)) {
if (rb->nr_pages)
local_inc(&rb->lost);
goto out;
perf/ring_buffer: Introduce new ioctl options to pause and resume the ring-buffer Add new ioctl() to pause/resume ring-buffer output. In some situations we want to read from the ring-buffer only when we ensure nothing can write to the ring-buffer during reading. Without this patch we have to turn off all events attached to this ring-buffer to achieve this. This patch is a prerequisite to enable overwrite support for the perf ring-buffer support. Following commits will introduce new methods support reading from overwrite ring buffer. Before reading, caller must ensure the ring buffer is frozen, or the reading is unreliable. Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-2-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:29 -06:00
}
handle->rb = rb;
handle->event = event;
have_lost = local_read(&rb->lost);
if (unlikely(have_lost)) {
size += sizeof(lost_event);
if (event->attr.sample_id_all)
size += event->id_header_size;
}
perf_output_get_handle(handle);
do {
atomic: remove all traces of READ_ONCE_CTRL() and atomic*_read_ctrl() This seems to be a mis-reading of how alpha memory ordering works, and is not backed up by the alpha architecture manual. The helper functions don't do anything special on any other architectures, and the arguments that support them being safe on other architectures also argue that they are safe on alpha. Basically, the "control dependency" is between a previous read and a subsequent write that is dependent on the value read. Even if the subsequent write is actually done speculatively, there is no way that such a speculative write could be made visible to other cpu's until it has been committed, which requires validating the speculation. Note that most weakely ordered architectures (very much including alpha) do not guarantee any ordering relationship between two loads that depend on each other on a control dependency: read A if (val == 1) read B because the conditional may be predicted, and the "read B" may be speculatively moved up to before reading the value A. So we require the user to insert a smp_rmb() between the two accesses to be correct: read A; if (A == 1) smp_rmb() read B Alpha is further special in that it can break that ordering even if the *address* of B depends on the read of A, because the cacheline that is read later may be stale unless you have a memory barrier in between the pointer read and the read of the value behind a pointer: read ptr read offset(ptr) whereas all other weakly ordered architectures guarantee that the data dependency (as opposed to just a control dependency) will order the two accesses. As a result, alpha needs a "smp_read_barrier_depends()" in between those two reads for them to be ordered. The coontrol dependency that "READ_ONCE_CTRL()" and "atomic_read_ctrl()" had was a control dependency to a subsequent *write*, however, and nobody can finalize such a subsequent write without having actually done the read. And were you to write such a value to a "stale" cacheline (the way the unordered reads came to be), that would seem to lose the write entirely. So the things that make alpha able to re-order reads even more aggressively than other weak architectures do not seem to be relevant for a subsequent write. Alpha memory ordering may be strange, but there's no real indication that it is *that* strange. Also, the alpha architecture reference manual very explicitly talks about the definition of "Dependence Constraints" in section 5.6.1.7, where a preceding read dominates a subsequent write. Such a dependence constraint admittedly does not impose a BEFORE (alpha architecture term for globally visible ordering), but it does guarantee that there can be no "causal loop". I don't see how you could avoid such a loop if another cpu could see the stored value and then impact the value of the first read. Put another way: the read and the write could not be seen as being out of order wrt other cpus. So I do not see how these "x_ctrl()" functions can currently be necessary. I may have to eat my words at some point, but in the absense of clear proof that alpha actually needs this, or indeed even an explanation of how alpha could _possibly_ need it, I do not believe these functions are called for. And if it turns out that alpha really _does_ need a barrier for this case, that barrier still should not be "smp_read_barrier_depends()". We'd have to make up some new speciality barrier just for alpha, along with the documentation for why it really is necessary. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul E McKenney <paulmck@us.ibm.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-03 18:22:17 -07:00
tail = READ_ONCE(rb->user_page->data_tail);
offset = head = local_read(&rb->head);
perf/ring_buffer: Prepare writing into the ring-buffer from the end Convert perf_output_begin() to __perf_output_begin() and make the later function able to write records from the end of the ring-buffer. Following commits will utilize the 'backward' flag. This is the core patch to support writing to the ring-buffer backwards, which will be introduced by upcoming patches to support reading from overwritable ring-buffers. In theory, this patch should not introduce any extra performance overhead since we use always_inline, but it does not hurt to double check that assumption: When CONFIG_OPTIMIZE_INLINING is disabled, the output object is nearly identical to original one. See: http://lkml.kernel.org/g/56F52E83.70409@huawei.com When CONFIG_OPTIMIZE_INLINING is enabled, the resuling object file becomes smaller: $ size kernel/events/ring_buffer.o* text data bss dec hex filename 4641 4 8 4653 122d kernel/events/ring_buffer.o.old 4545 4 8 4557 11cd kernel/events/ring_buffer.o.new Performance testing results: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE 2253846.700 9997.014 POST 2257495.540 8516.293 Where 'BASE' is pure performance without capturing. 'PRE' is test result of pure 'v4.5.0' kernel. 'POST' is test result after this patch. Considering the stdvar, this patch doesn't hurt performance, within noise margin. For testing details, see: http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-4-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:31 -06:00
if (!rb->overwrite) {
if (unlikely(!ring_buffer_has_space(head, tail,
perf_data_size(rb),
size, backward)))
goto fail;
}
/*
* The above forms a control dependency barrier separating the
* @tail load above from the data stores below. Since the @tail
* load is required to compute the branch to fail below.
*
* A, matches D; the full memory barrier userspace SHOULD issue
* after reading the data and before storing the new tail
* position.
*
* See perf_output_put_handle().
*/
perf/ring_buffer: Prepare writing into the ring-buffer from the end Convert perf_output_begin() to __perf_output_begin() and make the later function able to write records from the end of the ring-buffer. Following commits will utilize the 'backward' flag. This is the core patch to support writing to the ring-buffer backwards, which will be introduced by upcoming patches to support reading from overwritable ring-buffers. In theory, this patch should not introduce any extra performance overhead since we use always_inline, but it does not hurt to double check that assumption: When CONFIG_OPTIMIZE_INLINING is disabled, the output object is nearly identical to original one. See: http://lkml.kernel.org/g/56F52E83.70409@huawei.com When CONFIG_OPTIMIZE_INLINING is enabled, the resuling object file becomes smaller: $ size kernel/events/ring_buffer.o* text data bss dec hex filename 4641 4 8 4653 122d kernel/events/ring_buffer.o.old 4545 4 8 4557 11cd kernel/events/ring_buffer.o.new Performance testing results: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE 2253846.700 9997.014 POST 2257495.540 8516.293 Where 'BASE' is pure performance without capturing. 'PRE' is test result of pure 'v4.5.0' kernel. 'POST' is test result after this patch. Considering the stdvar, this patch doesn't hurt performance, within noise margin. For testing details, see: http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-4-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:31 -06:00
if (!backward)
head += size;
else
head -= size;
} while (local_cmpxchg(&rb->head, offset, head) != offset);
perf/ring_buffer: Prepare writing into the ring-buffer from the end Convert perf_output_begin() to __perf_output_begin() and make the later function able to write records from the end of the ring-buffer. Following commits will utilize the 'backward' flag. This is the core patch to support writing to the ring-buffer backwards, which will be introduced by upcoming patches to support reading from overwritable ring-buffers. In theory, this patch should not introduce any extra performance overhead since we use always_inline, but it does not hurt to double check that assumption: When CONFIG_OPTIMIZE_INLINING is disabled, the output object is nearly identical to original one. See: http://lkml.kernel.org/g/56F52E83.70409@huawei.com When CONFIG_OPTIMIZE_INLINING is enabled, the resuling object file becomes smaller: $ size kernel/events/ring_buffer.o* text data bss dec hex filename 4641 4 8 4653 122d kernel/events/ring_buffer.o.old 4545 4 8 4557 11cd kernel/events/ring_buffer.o.new Performance testing results: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE 2253846.700 9997.014 POST 2257495.540 8516.293 Where 'BASE' is pure performance without capturing. 'PRE' is test result of pure 'v4.5.0' kernel. 'POST' is test result after this patch. Considering the stdvar, this patch doesn't hurt performance, within noise margin. For testing details, see: http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-4-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:31 -06:00
if (backward) {
offset = head;
head = (u64)(-head);
}
/*
* We rely on the implied barrier() by local_cmpxchg() to ensure
* none of the data stores below can be lifted up by the compiler.
*/
if (unlikely(head - local_read(&rb->wakeup) > rb->watermark))
local_add(rb->watermark, &rb->wakeup);
page_shift = PAGE_SHIFT + page_order(rb);
handle->page = (offset >> page_shift) & (rb->nr_pages - 1);
offset &= (1UL << page_shift) - 1;
handle->addr = rb->data_pages[handle->page] + offset;
handle->size = (1UL << page_shift) - offset;
if (unlikely(have_lost)) {
struct perf_sample_data sample_data;
lost_event.header.size = sizeof(lost_event);
lost_event.header.type = PERF_RECORD_LOST;
lost_event.header.misc = 0;
lost_event.id = event->id;
lost_event.lost = local_xchg(&rb->lost, 0);
perf_event_header__init_id(&lost_event.header,
&sample_data, event);
perf_output_put(handle, lost_event);
perf_event__output_id_sample(event, handle, &sample_data);
}
return 0;
fail:
local_inc(&rb->lost);
perf_output_put_handle(handle);
out:
rcu_read_unlock();
return -ENOSPC;
}
perf/core: Add ::write_backward attribute to perf event This patch introduces 'write_backward' bit to perf_event_attr, which controls the direction of a ring buffer. After set, the corresponding ring buffer is written from end to beginning. This feature is design to support reading from overwritable ring buffer. Ring buffer can be created by mapping a perf event fd. Kernel puts event records into ring buffer, user tooling like perf fetch them from address returned by mmap(). To prevent racing between kernel and tooling, they communicate to each other through 'head' and 'tail' pointers. Kernel maintains 'head' pointer, points it to the next free area (tail of the last record). Tooling maintains 'tail' pointer, points it to the tail of last consumed record (record has already been fetched). Kernel determines the available space in a ring buffer using these two pointers to avoid overwrite unfetched records. By mapping without 'PROT_WRITE', an overwritable ring buffer is created. Different from normal ring buffer, tooling is unable to maintain 'tail' pointer because writing is forbidden. Therefore, for this type of ring buffers, kernel overwrite old records unconditionally, works like flight recorder. This feature would be useful if reading from overwritable ring buffer were as easy as reading from normal ring buffer. However, there's an obscure problem. The following figure demonstrates a full overwritable ring buffer. In this figure, the 'head' pointer points to the end of last record, and a long record 'E' is pending. For a normal ring buffer, a 'tail' pointer would have pointed to position (X), so kernel knows there's no more space in the ring buffer. However, for an overwritable ring buffer, kernel ignore the 'tail' pointer. (X) head . | . V +------+-------+----------+------+---+ |A....A|B.....B|C........C|D....D| | +------+-------+----------+------+---+ Record 'A' is overwritten by event 'E': head | V +--+---+-------+----------+------+---+ |.E|..A|B.....B|C........C|D....D|E..| +--+---+-------+----------+------+---+ Now tooling decides to read from this ring buffer. However, none of these two natural positions, 'head' and the start of this ring buffer, are pointing to the head of a record. Even the full ring buffer can be accessed by tooling, it is unable to find a position to start decoding. The first attempt tries to solve this problem AFAIK can be found from [1]. It makes kernel to maintain 'tail' pointer: updates it when ring buffer is half full. However, this approach introduces overhead to fast path. Test result shows a 1% overhead [2]. In addition, this method utilizes no more tham 50% records. Another attempt can be found from [3], which allows putting the size of an event at the end of each record. This approach allows tooling to find records in a backward manner from 'head' pointer by reading size of a record from its tail. However, because of alignment requirement, it needs 8 bytes to record the size of a record, which is a huge waste. Its performance is also not good, because more data need to be written. This approach also introduces some extra branch instructions to fast path. 'write_backward' is a better solution to this problem. Following figure demonstrates the state of the overwritable ring buffer when 'write_backward' is set before overwriting: head | V +---+------+----------+-------+------+ | |D....D|C........C|B.....B|A....A| +---+------+----------+-------+------+ and after overwriting: head | V +---+------+----------+-------+---+--+ |..E|D....D|C........C|B.....B|A..|E.| +---+------+----------+-------+---+--+ In each situation, 'head' points to the beginning of the newest record. From this record, tooling can iterate over the full ring buffer and fetch records one by one. The only limitation that needs to be considered is back-to-back reading. Due to the non-deterministic of user programs, it is impossible to ensure the ring buffer keeps stable during reading. Consider an extreme situation: tooling is scheduled out after reading record 'D', then a burst of events come, eat up the whole ring buffer (one or multiple rounds). When the tooling process comes back, reading after 'D' is incorrect now. To prevent this problem, we need to find a way to ensure the ring buffer is stable during reading. ioctl(PERF_EVENT_IOC_PAUSE_OUTPUT) is suggested because its overhead is lower than ioctl(PERF_EVENT_IOC_ENABLE). By carefully verifying 'header' pointer, reader can avoid pausing the ring-buffer. For example: /* A union of all possible events */ union perf_event event; p = head = perf_mmap__read_head(); while (true) { /* copy header of next event */ fetch(&event.header, p, sizeof(event.header)); /* read 'head' pointer */ head = perf_mmap__read_head(); /* check overwritten: is the header good? */ if (!verify(sizeof(event.header), p, head)) break; /* copy the whole event */ fetch(&event, p, event.header.size); /* read 'head' pointer again */ head = perf_mmap__read_head(); /* is the whole event good? */ if (!verify(event.header.size, p, head)) break; p += event.header.size; } However, the overhead is high because: a) In-place decoding is not safe. Copying-verifying-decoding is required. b) Fetching 'head' pointer requires additional synchronization. (From Alexei Starovoitov: Even when this trick works, pause is needed for more than stability of reading. When we collect the events into overwrite buffer we're waiting for some other trigger (like all cpu utilization spike or just one cpu running and all others are idle) and when it happens the buffer has valuable info from the past. At this point new events are no longer interesting and buffer should be paused, events read and unpaused until next trigger comes.) This patch utilizes event's default overflow_handler introduced previously. perf_event_output_backward() is created as the default overflow handler for backward ring buffers. To avoid extra overhead to fast path, original perf_event_output() becomes __perf_event_output() and marked '__always_inline'. In theory, there's no extra overhead introduced to fast path. Performance testing: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE1 2253846.700 9997.014 PRE2 2257495.540 8516.293 POST 2250896.100 8933.921 Where 'BASE' is pure performance without capturing. 'PRE1' is test result of pure 'v4.5.0' kernel. 'PRE2' is test result before this patch. 'POST' is test result after this patch. See [4] for the detailed experimental setup. Considering the stdvar, this patch doesn't introduce performance overhead to the fast path. [1] http://lkml.iu.edu/hypermail/linux/kernel/1304.1/04584.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1307.1/00535.html [3] http://lkml.iu.edu/hypermail/linux/kernel/1512.0/01265.html [4] http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: <acme@kernel.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459865478-53413-1-git-send-email-wangnan0@huawei.com [ Fixed the changelog some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-05 08:11:18 -06:00
int perf_output_begin_forward(struct perf_output_handle *handle,
struct perf_event *event, unsigned int size)
{
return __perf_output_begin(handle, event, size, false);
}
int perf_output_begin_backward(struct perf_output_handle *handle,
struct perf_event *event, unsigned int size)
{
return __perf_output_begin(handle, event, size, true);
}
perf/ring_buffer: Prepare writing into the ring-buffer from the end Convert perf_output_begin() to __perf_output_begin() and make the later function able to write records from the end of the ring-buffer. Following commits will utilize the 'backward' flag. This is the core patch to support writing to the ring-buffer backwards, which will be introduced by upcoming patches to support reading from overwritable ring-buffers. In theory, this patch should not introduce any extra performance overhead since we use always_inline, but it does not hurt to double check that assumption: When CONFIG_OPTIMIZE_INLINING is disabled, the output object is nearly identical to original one. See: http://lkml.kernel.org/g/56F52E83.70409@huawei.com When CONFIG_OPTIMIZE_INLINING is enabled, the resuling object file becomes smaller: $ size kernel/events/ring_buffer.o* text data bss dec hex filename 4641 4 8 4653 122d kernel/events/ring_buffer.o.old 4545 4 8 4557 11cd kernel/events/ring_buffer.o.new Performance testing results: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE 2253846.700 9997.014 POST 2257495.540 8516.293 Where 'BASE' is pure performance without capturing. 'PRE' is test result of pure 'v4.5.0' kernel. 'POST' is test result after this patch. Considering the stdvar, this patch doesn't hurt performance, within noise margin. For testing details, see: http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-4-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:31 -06:00
int perf_output_begin(struct perf_output_handle *handle,
struct perf_event *event, unsigned int size)
{
perf/core: Add ::write_backward attribute to perf event This patch introduces 'write_backward' bit to perf_event_attr, which controls the direction of a ring buffer. After set, the corresponding ring buffer is written from end to beginning. This feature is design to support reading from overwritable ring buffer. Ring buffer can be created by mapping a perf event fd. Kernel puts event records into ring buffer, user tooling like perf fetch them from address returned by mmap(). To prevent racing between kernel and tooling, they communicate to each other through 'head' and 'tail' pointers. Kernel maintains 'head' pointer, points it to the next free area (tail of the last record). Tooling maintains 'tail' pointer, points it to the tail of last consumed record (record has already been fetched). Kernel determines the available space in a ring buffer using these two pointers to avoid overwrite unfetched records. By mapping without 'PROT_WRITE', an overwritable ring buffer is created. Different from normal ring buffer, tooling is unable to maintain 'tail' pointer because writing is forbidden. Therefore, for this type of ring buffers, kernel overwrite old records unconditionally, works like flight recorder. This feature would be useful if reading from overwritable ring buffer were as easy as reading from normal ring buffer. However, there's an obscure problem. The following figure demonstrates a full overwritable ring buffer. In this figure, the 'head' pointer points to the end of last record, and a long record 'E' is pending. For a normal ring buffer, a 'tail' pointer would have pointed to position (X), so kernel knows there's no more space in the ring buffer. However, for an overwritable ring buffer, kernel ignore the 'tail' pointer. (X) head . | . V +------+-------+----------+------+---+ |A....A|B.....B|C........C|D....D| | +------+-------+----------+------+---+ Record 'A' is overwritten by event 'E': head | V +--+---+-------+----------+------+---+ |.E|..A|B.....B|C........C|D....D|E..| +--+---+-------+----------+------+---+ Now tooling decides to read from this ring buffer. However, none of these two natural positions, 'head' and the start of this ring buffer, are pointing to the head of a record. Even the full ring buffer can be accessed by tooling, it is unable to find a position to start decoding. The first attempt tries to solve this problem AFAIK can be found from [1]. It makes kernel to maintain 'tail' pointer: updates it when ring buffer is half full. However, this approach introduces overhead to fast path. Test result shows a 1% overhead [2]. In addition, this method utilizes no more tham 50% records. Another attempt can be found from [3], which allows putting the size of an event at the end of each record. This approach allows tooling to find records in a backward manner from 'head' pointer by reading size of a record from its tail. However, because of alignment requirement, it needs 8 bytes to record the size of a record, which is a huge waste. Its performance is also not good, because more data need to be written. This approach also introduces some extra branch instructions to fast path. 'write_backward' is a better solution to this problem. Following figure demonstrates the state of the overwritable ring buffer when 'write_backward' is set before overwriting: head | V +---+------+----------+-------+------+ | |D....D|C........C|B.....B|A....A| +---+------+----------+-------+------+ and after overwriting: head | V +---+------+----------+-------+---+--+ |..E|D....D|C........C|B.....B|A..|E.| +---+------+----------+-------+---+--+ In each situation, 'head' points to the beginning of the newest record. From this record, tooling can iterate over the full ring buffer and fetch records one by one. The only limitation that needs to be considered is back-to-back reading. Due to the non-deterministic of user programs, it is impossible to ensure the ring buffer keeps stable during reading. Consider an extreme situation: tooling is scheduled out after reading record 'D', then a burst of events come, eat up the whole ring buffer (one or multiple rounds). When the tooling process comes back, reading after 'D' is incorrect now. To prevent this problem, we need to find a way to ensure the ring buffer is stable during reading. ioctl(PERF_EVENT_IOC_PAUSE_OUTPUT) is suggested because its overhead is lower than ioctl(PERF_EVENT_IOC_ENABLE). By carefully verifying 'header' pointer, reader can avoid pausing the ring-buffer. For example: /* A union of all possible events */ union perf_event event; p = head = perf_mmap__read_head(); while (true) { /* copy header of next event */ fetch(&event.header, p, sizeof(event.header)); /* read 'head' pointer */ head = perf_mmap__read_head(); /* check overwritten: is the header good? */ if (!verify(sizeof(event.header), p, head)) break; /* copy the whole event */ fetch(&event, p, event.header.size); /* read 'head' pointer again */ head = perf_mmap__read_head(); /* is the whole event good? */ if (!verify(event.header.size, p, head)) break; p += event.header.size; } However, the overhead is high because: a) In-place decoding is not safe. Copying-verifying-decoding is required. b) Fetching 'head' pointer requires additional synchronization. (From Alexei Starovoitov: Even when this trick works, pause is needed for more than stability of reading. When we collect the events into overwrite buffer we're waiting for some other trigger (like all cpu utilization spike or just one cpu running and all others are idle) and when it happens the buffer has valuable info from the past. At this point new events are no longer interesting and buffer should be paused, events read and unpaused until next trigger comes.) This patch utilizes event's default overflow_handler introduced previously. perf_event_output_backward() is created as the default overflow handler for backward ring buffers. To avoid extra overhead to fast path, original perf_event_output() becomes __perf_event_output() and marked '__always_inline'. In theory, there's no extra overhead introduced to fast path. Performance testing: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE1 2253846.700 9997.014 PRE2 2257495.540 8516.293 POST 2250896.100 8933.921 Where 'BASE' is pure performance without capturing. 'PRE1' is test result of pure 'v4.5.0' kernel. 'PRE2' is test result before this patch. 'POST' is test result after this patch. See [4] for the detailed experimental setup. Considering the stdvar, this patch doesn't introduce performance overhead to the fast path. [1] http://lkml.iu.edu/hypermail/linux/kernel/1304.1/04584.html [2] http://lkml.iu.edu/hypermail/linux/kernel/1307.1/00535.html [3] http://lkml.iu.edu/hypermail/linux/kernel/1512.0/01265.html [4] http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Cc: <acme@kernel.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459865478-53413-1-git-send-email-wangnan0@huawei.com [ Fixed the changelog some more. ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-04-05 08:11:18 -06:00
return __perf_output_begin(handle, event, size,
unlikely(is_write_backward(event)));
perf/ring_buffer: Prepare writing into the ring-buffer from the end Convert perf_output_begin() to __perf_output_begin() and make the later function able to write records from the end of the ring-buffer. Following commits will utilize the 'backward' flag. This is the core patch to support writing to the ring-buffer backwards, which will be introduced by upcoming patches to support reading from overwritable ring-buffers. In theory, this patch should not introduce any extra performance overhead since we use always_inline, but it does not hurt to double check that assumption: When CONFIG_OPTIMIZE_INLINING is disabled, the output object is nearly identical to original one. See: http://lkml.kernel.org/g/56F52E83.70409@huawei.com When CONFIG_OPTIMIZE_INLINING is enabled, the resuling object file becomes smaller: $ size kernel/events/ring_buffer.o* text data bss dec hex filename 4641 4 8 4653 122d kernel/events/ring_buffer.o.old 4545 4 8 4557 11cd kernel/events/ring_buffer.o.new Performance testing results: Calling 3000000 times of 'close(-1)', use gettimeofday() to check duration. Use 'perf record -o /dev/null -e raw_syscalls:*' to capture system calls. In ns. Testing environment: CPU : Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz Kernel : v4.5.0 MEAN STDVAR BASE 800214.950 2853.083 PRE 2253846.700 9997.014 POST 2257495.540 8516.293 Where 'BASE' is pure performance without capturing. 'PRE' is test result of pure 'v4.5.0' kernel. 'POST' is test result after this patch. Considering the stdvar, this patch doesn't hurt performance, within noise margin. For testing details, see: http://lkml.kernel.org/g/56F89DCD.1040202@huawei.com Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-4-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:31 -06:00
}
unsigned int perf_output_copy(struct perf_output_handle *handle,
const void *buf, unsigned int len)
{
return __output_copy(handle, buf, len);
}
unsigned int perf_output_skip(struct perf_output_handle *handle,
unsigned int len)
{
return __output_skip(handle, NULL, len);
}
void perf_output_end(struct perf_output_handle *handle)
{
perf_output_put_handle(handle);
rcu_read_unlock();
}
static void
ring_buffer_init(struct ring_buffer *rb, long watermark, int flags)
{
long max_size = perf_data_size(rb);
if (watermark)
rb->watermark = min(max_size, watermark);
if (!rb->watermark)
rb->watermark = max_size / 2;
if (flags & RING_BUFFER_WRITABLE)
rb->overwrite = 0;
else
rb->overwrite = 1;
atomic_set(&rb->refcount, 1);
perf: Fix loss of notification with multi-event When you do: $ perf record -e cycles,cycles,cycles noploop 10 You expect about 10,000 samples for each event, i.e., 10s at 1000samples/sec. However, this is not what's happening. You get much fewer samples, maybe 3700 samples/event: $ perf report -D | tail -15 Aggregated stats: TOTAL events: 10998 MMAP events: 66 COMM events: 2 SAMPLE events: 10930 cycles stats: TOTAL events: 3644 SAMPLE events: 3644 cycles stats: TOTAL events: 3642 SAMPLE events: 3642 cycles stats: TOTAL events: 3644 SAMPLE events: 3644 On a Intel Nehalem or even AMD64, there are 4 counters capable of measuring cycles, so there is plenty of space to measure those events without multiplexing (even with the NMI watchdog active). And even with multiplexing, we'd expect roughly the same number of samples per event. The root of the problem was that when the event that caused the buffer to become full was not the first event passed on the cmdline, the user notification would get lost. The notification was sent to the file descriptor of the overflowed event but the perf tool was not polling on it. The perf tool aggregates all samples into a single buffer, i.e., the buffer of the first event. Consequently, it assumes notifications for any event will come via that descriptor. The seemingly straight forward solution of moving the waitq into the ringbuffer object doesn't work because of life-time issues. One could perf_event_set_output() on a fd that you're also blocking on and cause the old rb object to be freed while its waitq would still be referenced by the blocked thread -> FAIL. Therefore link all events to the ringbuffer and broadcast the wakeup from the ringbuffer object to all possible events that could be waited upon. This is rather ugly, and we're open to better solutions but it works for now. Reported-by: Stephane Eranian <eranian@google.com> Finished-by: Stephane Eranian <eranian@google.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20111126014731.GA7030@quad Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-25 18:47:31 -07:00
INIT_LIST_HEAD(&rb->event_list);
spin_lock_init(&rb->event_lock);
perf/ring_buffer: Introduce new ioctl options to pause and resume the ring-buffer Add new ioctl() to pause/resume ring-buffer output. In some situations we want to read from the ring-buffer only when we ensure nothing can write to the ring-buffer during reading. Without this patch we have to turn off all events attached to this ring-buffer to achieve this. This patch is a prerequisite to enable overwrite support for the perf ring-buffer support. Following commits will introduce new methods support reading from overwrite ring buffer. Before reading, caller must ensure the ring buffer is frozen, or the reading is unreliable. Signed-off-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: <pi3orama@163.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/r/1459147292-239310-2-git-send-email-wangnan0@huawei.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-03-28 00:41:29 -06:00
/*
* perf_output_begin() only checks rb->paused, therefore
* rb->paused must be true if we have no pages for output.
*/
if (!rb->nr_pages)
rb->paused = 1;
}
void perf_aux_output_flag(struct perf_output_handle *handle, u64 flags)
{
/*
* OVERWRITE is determined by perf_aux_output_end() and can't
* be passed in directly.
*/
if (WARN_ON_ONCE(flags & PERF_AUX_FLAG_OVERWRITE))
return;
handle->aux_flags |= flags;
}
EXPORT_SYMBOL_GPL(perf_aux_output_flag);
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
/*
* This is called before hardware starts writing to the AUX area to
* obtain an output handle and make sure there's room in the buffer.
* When the capture completes, call perf_aux_output_end() to commit
* the recorded data to the buffer.
*
* The ordering is similar to that of perf_output_{begin,end}, with
* the exception of (B), which should be taken care of by the pmu
* driver, since ordering rules will differ depending on hardware.
*
* Call this from pmu::start(); see the comment in perf_aux_output_end()
* about its use in pmu callbacks. Both can also be called from the PMI
* handler if needed.
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
*/
void *perf_aux_output_begin(struct perf_output_handle *handle,
struct perf_event *event)
{
struct perf_event *output_event = event;
unsigned long aux_head, aux_tail;
struct ring_buffer *rb;
if (output_event->parent)
output_event = output_event->parent;
/*
* Since this will typically be open across pmu::add/pmu::del, we
* grab ring_buffer's refcount instead of holding rcu read lock
* to make sure it doesn't disappear under us.
*/
rb = ring_buffer_get(output_event);
if (!rb)
return NULL;
perf/core: Fix aux_mmap_count vs aux_refcount order The order of accesses to ring buffer's aux_mmap_count and aux_refcount has to be preserved across the users, namely perf_mmap_close() and perf_aux_output_begin(), otherwise the inversion can result in the latter holding the last reference to the aux buffer and subsequently free'ing it in atomic context, triggering a warning. > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 257 at kernel/events/ring_buffer.c:541 __rb_free_aux+0x11a/0x130 > CPU: 0 PID: 257 Comm: stopbug Not tainted 4.8.0-rc1+ #2596 > Call Trace: > [<ffffffff810f3e0b>] __warn+0xcb/0xf0 > [<ffffffff810f3f3d>] warn_slowpath_null+0x1d/0x20 > [<ffffffff8121182a>] __rb_free_aux+0x11a/0x130 > [<ffffffff812127a8>] rb_free_aux+0x18/0x20 > [<ffffffff81212913>] perf_aux_output_begin+0x163/0x1e0 > [<ffffffff8100c33a>] bts_event_start+0x3a/0xd0 > [<ffffffff8100c42d>] bts_event_add+0x5d/0x80 > [<ffffffff81203646>] event_sched_in.isra.104+0xf6/0x2f0 > [<ffffffff8120652e>] group_sched_in+0x6e/0x190 > [<ffffffff8120694e>] ctx_sched_in+0x2fe/0x5f0 > [<ffffffff81206ca0>] perf_event_sched_in+0x60/0x80 > [<ffffffff81206d1b>] ctx_resched+0x5b/0x90 > [<ffffffff81207281>] __perf_event_enable+0x1e1/0x240 > [<ffffffff81200639>] event_function+0xa9/0x180 > [<ffffffff81202000>] ? perf_cgroup_attach+0x70/0x70 > [<ffffffff8120203f>] remote_function+0x3f/0x50 > [<ffffffff811971f3>] flush_smp_call_function_queue+0x83/0x150 > [<ffffffff81197bd3>] generic_smp_call_function_single_interrupt+0x13/0x60 > [<ffffffff810a6477>] smp_call_function_single_interrupt+0x27/0x40 > [<ffffffff81a26ea9>] call_function_single_interrupt+0x89/0x90 > [<ffffffff81120056>] finish_task_switch+0xa6/0x210 > [<ffffffff81120017>] ? finish_task_switch+0x67/0x210 > [<ffffffff81a1e83d>] __schedule+0x3dd/0xb50 > [<ffffffff81a1efe5>] schedule+0x35/0x80 > [<ffffffff81128031>] sys_sched_yield+0x61/0x70 > [<ffffffff81a25be5>] entry_SYSCALL_64_fastpath+0x18/0xa8 > ---[ end trace 6235f556f5ea83a9 ]--- This patch puts the checks in perf_aux_output_begin() in the same order as that of perf_mmap_close(). Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160906132353.19887-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-06 07:23:50 -06:00
if (!rb_has_aux(rb))
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
goto err;
/*
perf/core: Fix aux_mmap_count vs aux_refcount order The order of accesses to ring buffer's aux_mmap_count and aux_refcount has to be preserved across the users, namely perf_mmap_close() and perf_aux_output_begin(), otherwise the inversion can result in the latter holding the last reference to the aux buffer and subsequently free'ing it in atomic context, triggering a warning. > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 257 at kernel/events/ring_buffer.c:541 __rb_free_aux+0x11a/0x130 > CPU: 0 PID: 257 Comm: stopbug Not tainted 4.8.0-rc1+ #2596 > Call Trace: > [<ffffffff810f3e0b>] __warn+0xcb/0xf0 > [<ffffffff810f3f3d>] warn_slowpath_null+0x1d/0x20 > [<ffffffff8121182a>] __rb_free_aux+0x11a/0x130 > [<ffffffff812127a8>] rb_free_aux+0x18/0x20 > [<ffffffff81212913>] perf_aux_output_begin+0x163/0x1e0 > [<ffffffff8100c33a>] bts_event_start+0x3a/0xd0 > [<ffffffff8100c42d>] bts_event_add+0x5d/0x80 > [<ffffffff81203646>] event_sched_in.isra.104+0xf6/0x2f0 > [<ffffffff8120652e>] group_sched_in+0x6e/0x190 > [<ffffffff8120694e>] ctx_sched_in+0x2fe/0x5f0 > [<ffffffff81206ca0>] perf_event_sched_in+0x60/0x80 > [<ffffffff81206d1b>] ctx_resched+0x5b/0x90 > [<ffffffff81207281>] __perf_event_enable+0x1e1/0x240 > [<ffffffff81200639>] event_function+0xa9/0x180 > [<ffffffff81202000>] ? perf_cgroup_attach+0x70/0x70 > [<ffffffff8120203f>] remote_function+0x3f/0x50 > [<ffffffff811971f3>] flush_smp_call_function_queue+0x83/0x150 > [<ffffffff81197bd3>] generic_smp_call_function_single_interrupt+0x13/0x60 > [<ffffffff810a6477>] smp_call_function_single_interrupt+0x27/0x40 > [<ffffffff81a26ea9>] call_function_single_interrupt+0x89/0x90 > [<ffffffff81120056>] finish_task_switch+0xa6/0x210 > [<ffffffff81120017>] ? finish_task_switch+0x67/0x210 > [<ffffffff81a1e83d>] __schedule+0x3dd/0xb50 > [<ffffffff81a1efe5>] schedule+0x35/0x80 > [<ffffffff81128031>] sys_sched_yield+0x61/0x70 > [<ffffffff81a25be5>] entry_SYSCALL_64_fastpath+0x18/0xa8 > ---[ end trace 6235f556f5ea83a9 ]--- This patch puts the checks in perf_aux_output_begin() in the same order as that of perf_mmap_close(). Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160906132353.19887-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-06 07:23:50 -06:00
* If aux_mmap_count is zero, the aux buffer is in perf_mmap_close(),
* about to get freed, so we leave immediately.
*
* Checking rb::aux_mmap_count and rb::refcount has to be done in
* the same order, see perf_mmap_close. Otherwise we end up freeing
* aux pages in this path, which is a bug, because in_atomic().
*/
if (!atomic_read(&rb->aux_mmap_count))
perf/core: Fix aux_mmap_count vs aux_refcount order The order of accesses to ring buffer's aux_mmap_count and aux_refcount has to be preserved across the users, namely perf_mmap_close() and perf_aux_output_begin(), otherwise the inversion can result in the latter holding the last reference to the aux buffer and subsequently free'ing it in atomic context, triggering a warning. > ------------[ cut here ]------------ > WARNING: CPU: 0 PID: 257 at kernel/events/ring_buffer.c:541 __rb_free_aux+0x11a/0x130 > CPU: 0 PID: 257 Comm: stopbug Not tainted 4.8.0-rc1+ #2596 > Call Trace: > [<ffffffff810f3e0b>] __warn+0xcb/0xf0 > [<ffffffff810f3f3d>] warn_slowpath_null+0x1d/0x20 > [<ffffffff8121182a>] __rb_free_aux+0x11a/0x130 > [<ffffffff812127a8>] rb_free_aux+0x18/0x20 > [<ffffffff81212913>] perf_aux_output_begin+0x163/0x1e0 > [<ffffffff8100c33a>] bts_event_start+0x3a/0xd0 > [<ffffffff8100c42d>] bts_event_add+0x5d/0x80 > [<ffffffff81203646>] event_sched_in.isra.104+0xf6/0x2f0 > [<ffffffff8120652e>] group_sched_in+0x6e/0x190 > [<ffffffff8120694e>] ctx_sched_in+0x2fe/0x5f0 > [<ffffffff81206ca0>] perf_event_sched_in+0x60/0x80 > [<ffffffff81206d1b>] ctx_resched+0x5b/0x90 > [<ffffffff81207281>] __perf_event_enable+0x1e1/0x240 > [<ffffffff81200639>] event_function+0xa9/0x180 > [<ffffffff81202000>] ? perf_cgroup_attach+0x70/0x70 > [<ffffffff8120203f>] remote_function+0x3f/0x50 > [<ffffffff811971f3>] flush_smp_call_function_queue+0x83/0x150 > [<ffffffff81197bd3>] generic_smp_call_function_single_interrupt+0x13/0x60 > [<ffffffff810a6477>] smp_call_function_single_interrupt+0x27/0x40 > [<ffffffff81a26ea9>] call_function_single_interrupt+0x89/0x90 > [<ffffffff81120056>] finish_task_switch+0xa6/0x210 > [<ffffffff81120017>] ? finish_task_switch+0x67/0x210 > [<ffffffff81a1e83d>] __schedule+0x3dd/0xb50 > [<ffffffff81a1efe5>] schedule+0x35/0x80 > [<ffffffff81128031>] sys_sched_yield+0x61/0x70 > [<ffffffff81a25be5>] entry_SYSCALL_64_fastpath+0x18/0xa8 > ---[ end trace 6235f556f5ea83a9 ]--- This patch puts the checks in perf_aux_output_begin() in the same order as that of perf_mmap_close(). Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: vince@deater.net Link: http://lkml.kernel.org/r/20160906132353.19887-3-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-06 07:23:50 -06:00
goto err;
if (!atomic_inc_not_zero(&rb->aux_refcount))
goto err;
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
/*
* Nesting is not supported for AUX area, make sure nested
* writers are caught early
*/
if (WARN_ON_ONCE(local_xchg(&rb->aux_nest, 1)))
goto err_put;
aux_head = rb->aux_head;
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
handle->rb = rb;
handle->event = event;
handle->head = aux_head;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
handle->size = 0;
handle->aux_flags = 0;
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
/*
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
* In overwrite mode, AUX data stores do not depend on aux_tail,
* therefore (A) control dependency barrier does not exist. The
* (B) <-> (C) ordering is still observed by the pmu driver.
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
*/
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
if (!rb->aux_overwrite) {
aux_tail = ACCESS_ONCE(rb->user_page->aux_tail);
handle->wakeup = rb->aux_wakeup + rb->aux_watermark;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
if (aux_head - aux_tail < perf_aux_size(rb))
handle->size = CIRC_SPACE(aux_head, aux_tail, perf_aux_size(rb));
/*
* handle->size computation depends on aux_tail load; this forms a
* control dependency barrier separating aux_tail load from aux data
* store that will be enabled on successful return
*/
if (!handle->size) { /* A, matches D */
event->pending_disable = 1;
perf_output_wakeup(handle);
local_set(&rb->aux_nest, 0);
goto err_put;
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
}
return handle->rb->aux_priv;
err_put:
/* can't be last */
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
rb_free_aux(rb);
err:
ring_buffer_put(rb);
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
handle->event = NULL;
return NULL;
}
static bool __always_inline rb_need_aux_wakeup(struct ring_buffer *rb)
{
if (rb->aux_overwrite)
return false;
if (rb->aux_head - rb->aux_wakeup >= rb->aux_watermark) {
rb->aux_wakeup = rounddown(rb->aux_head, rb->aux_watermark);
return true;
}
return false;
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
/*
* Commit the data written by hardware into the ring buffer by adjusting
* aux_head and posting a PERF_RECORD_AUX into the perf buffer. It is the
* pmu driver's responsibility to observe ordering rules of the hardware,
* so that all the data is externally visible before this is called.
*
* Note: this has to be called from pmu::stop() callback, as the assumption
* of the AUX buffer management code is that after pmu::stop(), the AUX
* transaction must be stopped and therefore drop the AUX reference count.
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
*/
void perf_aux_output_end(struct perf_output_handle *handle, unsigned long size)
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
{
bool wakeup = !!(handle->aux_flags & PERF_AUX_FLAG_TRUNCATED);
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
struct ring_buffer *rb = handle->rb;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
unsigned long aux_head;
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
/* in overwrite mode, driver provides aux_head via handle */
if (rb->aux_overwrite) {
handle->aux_flags |= PERF_AUX_FLAG_OVERWRITE;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
aux_head = handle->head;
rb->aux_head = aux_head;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
} else {
handle->aux_flags &= ~PERF_AUX_FLAG_OVERWRITE;
aux_head = rb->aux_head;
rb->aux_head += size;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
if (size || handle->aux_flags) {
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
/*
* Only send RECORD_AUX if we have something useful to communicate
*/
perf_event_aux_event(handle->event, aux_head, size,
handle->aux_flags);
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
}
rb->user_page->aux_head = rb->aux_head;
if (rb_need_aux_wakeup(rb))
wakeup = true;
if (wakeup) {
if (handle->aux_flags & PERF_AUX_FLAG_TRUNCATED)
handle->event->pending_disable = 1;
perf_output_wakeup(handle);
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
handle->event = NULL;
local_set(&rb->aux_nest, 0);
/* can't be last */
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
rb_free_aux(rb);
ring_buffer_put(rb);
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
}
/*
* Skip over a given number of bytes in the AUX buffer, due to, for example,
* hardware's alignment constraints.
*/
int perf_aux_output_skip(struct perf_output_handle *handle, unsigned long size)
{
struct ring_buffer *rb = handle->rb;
if (size > handle->size)
return -ENOSPC;
rb->aux_head += size;
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
rb->user_page->aux_head = rb->aux_head;
if (rb_need_aux_wakeup(rb)) {
perf_output_wakeup(handle);
handle->wakeup = rb->aux_wakeup + rb->aux_watermark;
}
handle->head = rb->aux_head;
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:16 -07:00
handle->size -= size;
return 0;
}
void *perf_get_aux(struct perf_output_handle *handle)
{
/* this is only valid between perf_aux_output_begin and *_end */
if (!handle->event)
return NULL;
return handle->rb->aux_priv;
}
#define PERF_AUX_GFP (GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN | __GFP_NORETRY)
static struct page *rb_alloc_aux_page(int node, int order)
{
struct page *page;
if (order > MAX_ORDER)
order = MAX_ORDER;
do {
page = alloc_pages_node(node, PERF_AUX_GFP, order);
} while (!page && order--);
if (page && order) {
/*
* Communicate the allocation size to the driver:
* if we managed to secure a high-order allocation,
* set its first page's private to this order;
* !PagePrivate(page) means it's just a normal page.
*/
split_page(page, order);
SetPagePrivate(page);
set_page_private(page, order);
}
return page;
}
static void rb_free_aux_page(struct ring_buffer *rb, int idx)
{
struct page *page = virt_to_page(rb->aux_pages[idx]);
ClearPagePrivate(page);
page->mapping = NULL;
__free_page(page);
}
perf: Synchronously free aux pages in case of allocation failure We are currently using asynchronous deallocation in the error path in AUX mmap code, which is unnecessary and also presents a problem for users that wish to probe for the biggest possible buffer size they can get: they'll get -EINVAL on all subsequent attemts to allocate a smaller buffer before the asynchronous deallocation callback frees up the pages from the previous unsuccessful attempt. Currently, gdb does that for allocating AUX buffers for Intel PT traces. More specifically, overwrite mode of AUX pmus that don't support hardware sg (some implementations of Intel PT, for instance) is limited to only one contiguous high order allocation for its buffer and there is no way of knowing its size without trying. This patch changes error path freeing to be synchronous as there won't be any contenders for the AUX pages at that point. Reported-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1453216469-9509-1-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-19 08:14:29 -07:00
static void __rb_free_aux(struct ring_buffer *rb)
{
int pg;
/*
* Should never happen, the last reference should be dropped from
* perf_mmap_close() path, which first stops aux transactions (which
* in turn are the atomic holders of aux_refcount) and then does the
* last rb_free_aux().
*/
WARN_ON_ONCE(in_atomic());
perf: Synchronously free aux pages in case of allocation failure We are currently using asynchronous deallocation in the error path in AUX mmap code, which is unnecessary and also presents a problem for users that wish to probe for the biggest possible buffer size they can get: they'll get -EINVAL on all subsequent attemts to allocate a smaller buffer before the asynchronous deallocation callback frees up the pages from the previous unsuccessful attempt. Currently, gdb does that for allocating AUX buffers for Intel PT traces. More specifically, overwrite mode of AUX pmus that don't support hardware sg (some implementations of Intel PT, for instance) is limited to only one contiguous high order allocation for its buffer and there is no way of knowing its size without trying. This patch changes error path freeing to be synchronous as there won't be any contenders for the AUX pages at that point. Reported-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1453216469-9509-1-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-19 08:14:29 -07:00
if (rb->aux_priv) {
rb->free_aux(rb->aux_priv);
rb->free_aux = NULL;
rb->aux_priv = NULL;
}
if (rb->aux_nr_pages) {
for (pg = 0; pg < rb->aux_nr_pages; pg++)
rb_free_aux_page(rb, pg);
kfree(rb->aux_pages);
rb->aux_nr_pages = 0;
}
}
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
int rb_alloc_aux(struct ring_buffer *rb, struct perf_event *event,
pgoff_t pgoff, int nr_pages, long watermark, int flags)
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
{
bool overwrite = !(flags & RING_BUFFER_WRITABLE);
int node = (event->cpu == -1) ? -1 : cpu_to_node(event->cpu);
int ret = -ENOMEM, max_order = 0;
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
if (!has_aux(event))
return -EOPNOTSUPP;
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
perf: Add a capability for AUX_NO_SG pmus to do software double buffering For pmus that don't support scatter-gather for AUX data in hardware, it might still make sense to implement software double buffering to avoid losing data while the user is reading data out. For this purpose, add a pmu capability that guarantees multiple high-order chunks for AUX buffer, so that the pmu driver can do switchover tricks. To make use of this feature, add PERF_PMU_CAP_AUX_SW_DOUBLEBUF to your pmu's capability mask. This will make the ring buffer AUX allocation code ensure that the biggest high order allocation for the aux buffer pages is no bigger than half of the total requested buffer size, thus making sure that the buffer has at least two high order allocations. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-5-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:13 -07:00
if (event->pmu->capabilities & PERF_PMU_CAP_AUX_NO_SG) {
/*
* We need to start with the max_order that fits in nr_pages,
* not the other way around, hence ilog2() and not get_order.
*/
max_order = ilog2(nr_pages);
perf: Add a capability for AUX_NO_SG pmus to do software double buffering For pmus that don't support scatter-gather for AUX data in hardware, it might still make sense to implement software double buffering to avoid losing data while the user is reading data out. For this purpose, add a pmu capability that guarantees multiple high-order chunks for AUX buffer, so that the pmu driver can do switchover tricks. To make use of this feature, add PERF_PMU_CAP_AUX_SW_DOUBLEBUF to your pmu's capability mask. This will make the ring buffer AUX allocation code ensure that the biggest high order allocation for the aux buffer pages is no bigger than half of the total requested buffer size, thus making sure that the buffer has at least two high order allocations. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-5-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:13 -07:00
/*
* PMU requests more than one contiguous chunks of memory
* for SW double buffering
*/
if ((event->pmu->capabilities & PERF_PMU_CAP_AUX_SW_DOUBLEBUF) &&
!overwrite) {
if (!max_order)
return -EINVAL;
max_order--;
}
}
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
rb->aux_pages = kzalloc_node(nr_pages * sizeof(void *), GFP_KERNEL, node);
if (!rb->aux_pages)
return -ENOMEM;
rb->free_aux = event->pmu->free_aux;
for (rb->aux_nr_pages = 0; rb->aux_nr_pages < nr_pages;) {
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
struct page *page;
int last, order;
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
order = min(max_order, ilog2(nr_pages - rb->aux_nr_pages));
page = rb_alloc_aux_page(node, order);
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
if (!page)
goto out;
for (last = rb->aux_nr_pages + (1 << page_private(page));
last > rb->aux_nr_pages; rb->aux_nr_pages++)
rb->aux_pages[rb->aux_nr_pages] = page_address(page++);
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
}
/*
* In overwrite mode, PMUs that don't support SG may not handle more
* than one contiguous allocation, since they rely on PMI to do double
* buffering. In this case, the entire buffer has to be one contiguous
* chunk.
*/
if ((event->pmu->capabilities & PERF_PMU_CAP_AUX_NO_SG) &&
overwrite) {
struct page *page = virt_to_page(rb->aux_pages[0]);
if (page_private(page) != max_order)
goto out;
}
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
rb->aux_priv = event->pmu->setup_aux(event->cpu, rb->aux_pages, nr_pages,
overwrite);
if (!rb->aux_priv)
goto out;
ret = 0;
/*
* aux_pages (and pmu driver's private data, aux_priv) will be
* referenced in both producer's and consumer's contexts, thus
* we keep a refcount here to make sure either of the two can
* reference them safely.
*/
atomic_set(&rb->aux_refcount, 1);
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
rb->aux_overwrite = overwrite;
rb->aux_watermark = watermark;
if (!rb->aux_watermark && !rb->aux_overwrite)
rb->aux_watermark = nr_pages << (PAGE_SHIFT - 1);
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:17 -07:00
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
out:
if (!ret)
rb->aux_pgoff = pgoff;
else
perf: Synchronously free aux pages in case of allocation failure We are currently using asynchronous deallocation in the error path in AUX mmap code, which is unnecessary and also presents a problem for users that wish to probe for the biggest possible buffer size they can get: they'll get -EINVAL on all subsequent attemts to allocate a smaller buffer before the asynchronous deallocation callback frees up the pages from the previous unsuccessful attempt. Currently, gdb does that for allocating AUX buffers for Intel PT traces. More specifically, overwrite mode of AUX pmus that don't support hardware sg (some implementations of Intel PT, for instance) is limited to only one contiguous high order allocation for its buffer and there is no way of knowing its size without trying. This patch changes error path freeing to be synchronous as there won't be any contenders for the AUX pages at that point. Reported-by: Markus Metzger <markus.t.metzger@intel.com> Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: vince@deater.net Link: http://lkml.kernel.org/r/1453216469-9509-1-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-01-19 08:14:29 -07:00
__rb_free_aux(rb);
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
return ret;
}
void rb_free_aux(struct ring_buffer *rb)
{
if (atomic_dec_and_test(&rb->aux_refcount))
__rb_free_aux(rb);
}
#ifndef CONFIG_PERF_USE_VMALLOC
/*
* Back perf_mmap() with regular GFP_KERNEL-0 pages.
*/
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
static struct page *
__perf_mmap_to_page(struct ring_buffer *rb, unsigned long pgoff)
{
if (pgoff > rb->nr_pages)
return NULL;
if (pgoff == 0)
return virt_to_page(rb->user_page);
return virt_to_page(rb->data_pages[pgoff - 1]);
}
static void *perf_mmap_alloc_page(int cpu)
{
struct page *page;
int node;
node = (cpu == -1) ? cpu : cpu_to_node(cpu);
page = alloc_pages_node(node, GFP_KERNEL | __GFP_ZERO, 0);
if (!page)
return NULL;
return page_address(page);
}
struct ring_buffer *rb_alloc(int nr_pages, long watermark, int cpu, int flags)
{
struct ring_buffer *rb;
unsigned long size;
int i;
size = sizeof(struct ring_buffer);
size += nr_pages * sizeof(void *);
rb = kzalloc(size, GFP_KERNEL);
if (!rb)
goto fail;
rb->user_page = perf_mmap_alloc_page(cpu);
if (!rb->user_page)
goto fail_user_page;
for (i = 0; i < nr_pages; i++) {
rb->data_pages[i] = perf_mmap_alloc_page(cpu);
if (!rb->data_pages[i])
goto fail_data_pages;
}
rb->nr_pages = nr_pages;
ring_buffer_init(rb, watermark, flags);
return rb;
fail_data_pages:
for (i--; i >= 0; i--)
free_page((unsigned long)rb->data_pages[i]);
free_page((unsigned long)rb->user_page);
fail_user_page:
kfree(rb);
fail:
return NULL;
}
static void perf_mmap_free_page(unsigned long addr)
{
struct page *page = virt_to_page((void *)addr);
page->mapping = NULL;
__free_page(page);
}
void rb_free(struct ring_buffer *rb)
{
int i;
perf_mmap_free_page((unsigned long)rb->user_page);
for (i = 0; i < rb->nr_pages; i++)
perf_mmap_free_page((unsigned long)rb->data_pages[i]);
kfree(rb);
}
#else
static int data_page_nr(struct ring_buffer *rb)
{
return rb->nr_pages << page_order(rb);
}
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
static struct page *
__perf_mmap_to_page(struct ring_buffer *rb, unsigned long pgoff)
{
/* The '>' counts in the user page. */
if (pgoff > data_page_nr(rb))
return NULL;
return vmalloc_to_page((void *)rb->user_page + pgoff * PAGE_SIZE);
}
static void perf_mmap_unmark_page(void *addr)
{
struct page *page = vmalloc_to_page(addr);
page->mapping = NULL;
}
static void rb_free_work(struct work_struct *work)
{
struct ring_buffer *rb;
void *base;
int i, nr;
rb = container_of(work, struct ring_buffer, work);
nr = data_page_nr(rb);
base = rb->user_page;
/* The '<=' counts in the user page. */
for (i = 0; i <= nr; i++)
perf_mmap_unmark_page(base + (i * PAGE_SIZE));
vfree(base);
kfree(rb);
}
void rb_free(struct ring_buffer *rb)
{
schedule_work(&rb->work);
}
struct ring_buffer *rb_alloc(int nr_pages, long watermark, int cpu, int flags)
{
struct ring_buffer *rb;
unsigned long size;
void *all_buf;
size = sizeof(struct ring_buffer);
size += sizeof(void *);
rb = kzalloc(size, GFP_KERNEL);
if (!rb)
goto fail;
INIT_WORK(&rb->work, rb_free_work);
all_buf = vmalloc_user((nr_pages + 1) * PAGE_SIZE);
if (!all_buf)
goto fail_all_buf;
rb->user_page = all_buf;
rb->data_pages[0] = all_buf + PAGE_SIZE;
if (nr_pages) {
rb->nr_pages = 1;
rb->page_order = ilog2(nr_pages);
}
ring_buffer_init(rb, watermark, flags);
return rb;
fail_all_buf:
kfree(rb);
fail:
return NULL;
}
#endif
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 05:18:11 -07:00
struct page *
perf_mmap_to_page(struct ring_buffer *rb, unsigned long pgoff)
{
if (rb->aux_nr_pages) {
/* above AUX space */
if (pgoff > rb->aux_pgoff + rb->aux_nr_pages)
return NULL;
/* AUX space */
if (pgoff >= rb->aux_pgoff)
return virt_to_page(rb->aux_pages[pgoff - rb->aux_pgoff]);
}
return __perf_mmap_to_page(rb, pgoff);
}