kernel-fxtec-pro1x/arch/mips/loongson/common/Makefile

#
# Makefile for loongson based machines.
#

obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \
    pci.o bonito-irq.o mem.o machtype.o platform.o
obj-$(CONFIG_GENERIC_GPIO) += gpio.o

#
# Serial port support
#
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SERIAL_8250) += serial.o
obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
obj-$(CONFIG_LOONGSON_MC146818) += rtc.o

#
# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure
# space
#
obj-$(CONFIG_CS5536) += cs5536/

#
# Suspend Support
#

obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
MIPS: Loongson: Split common loongson source code out To share common loongson source code between all of the loongson-based machines. there is a need to split it out of the fuloong-2e/ directory. at the same time, other according tuning is needed. the machine-specific parts are defined as macros in relative header file, pci.h, mem.h, machine.h. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-07-02 09:26:45 -06:00			`#`
			`# Makefile for loongson based machines.`
			`#`

			`obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \`
MIPS: Loongson: Cleanups of serial port support This patchs uses a loongson_uart_base variable instead of the uart_base[] array and adds a new kernel option to avoid to compile uart_base.c all the time, which will save a little bit of memory for us. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org http://patchwork.linux-mips.org/patch/727/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-11-27 23:21:50 -07:00			`pci.o bonito-irq.o mem.o machtype.o platform.o`
MIPS: Loongson 2F: Add gpio/gpioilb support Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/1163/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2010-04-29 03:58:54 -06:00			`obj-$(CONFIG_GENERIC_GPIO) += gpio.o`
MIPS: Loongson: Split common loongson source code out To share common loongson source code between all of the loongson-based machines. there is a need to split it out of the fuloong-2e/ directory. at the same time, other according tuning is needed. the machine-specific parts are defined as macros in relative header file, pci.h, mem.h, machine.h. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-07-02 09:26:45 -06:00
			`#`
MIPS: Loongson: Cleanups of serial port support This patchs uses a loongson_uart_base variable instead of the uart_base[] array and adds a new kernel option to avoid to compile uart_base.c all the time, which will save a little bit of memory for us. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org http://patchwork.linux-mips.org/patch/727/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-11-27 23:21:50 -07:00			`# Serial port support`
MIPS: Loongson: Split common loongson source code out To share common loongson source code between all of the loongson-based machines. there is a need to split it out of the fuloong-2e/ directory. at the same time, other according tuning is needed. the machine-specific parts are defined as macros in relative header file, pci.h, mem.h, machine.h. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-07-02 09:26:45 -06:00			`#`
			`obj-$(CONFIG_EARLY_PRINTK) += early_printk.o`
MIPS: Loongson: Add serial port support This patch add serial port support for all of the existing loongson family machines. most of the board specific part are put in serial.c, and the base address of the serial ports are defined as macros in machine.h for sharing it between serial.c and early_printk.c Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Linux-MIPS <linux-mips@linux-mips.org> Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Zhang Le <r0bertz@gentoo.org> Cc: zhangfx@lemote.com Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-10-16 00:17:18 -06:00			`obj-$(CONFIG_SERIAL_8250) += serial.o`
MIPS: Loongson: Cleanups of serial port support This patchs uses a loongson_uart_base variable instead of the uart_base[] array and adds a new kernel option to avoid to compile uart_base.c all the time, which will save a little bit of memory for us. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org http://patchwork.linux-mips.org/patch/727/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-11-27 23:21:50 -07:00			`obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o`
MIPS: Loongson: Define rtc device on MC146818-equipped systems This patch declare the rtc device present on systems with clock compatible with the mc146818 and handled by rtc-cmos. Introduce a new Kconfig entry because there are some systems without rtc_cmos compatible clock. Signed-off-by: Arnaud Patard <apatard@mandriva.com> To: linux-mips@linux-mips.org Cc: aba@not.so.argh.org Patchwork: http://patchwork.linux-mips.org/patch/1320/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2010-06-01 16:39:54 -06:00			`obj-$(CONFIG_LOONGSON_MC146818) += rtc.o`
MIPS: Lemote 2F: Add basic CS5536 VSM support Lemote Loongson 2F family machines use CS5536 as their south bridge and need these lowlevel interfaces to access the devices on CS5536. Virtualize the legacy devices on CS5536 as PCI devices. This way users can access the CS5536 PCI config space directly as a normal multi-function PCI 2.2 device. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: zhangfx@lemote.com Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Nicholas Mc Guire <hofrat@hofr.at> Cc: Arnaud Patard <apatard@mandriva.com> Cc: loongson-dev@googlegroups.com Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-11-09 09:06:12 -07:00
			`#`
			`# Enable CS5536 Virtual Support Module(VSM) to virtulize the PCI configure`
			`# space`
			`#`
			`obj-$(CONFIG_CS5536) += cs5536/`
MIPS: Loongson 2F: Add suspend support framework This patch add basic suspend support for loongson2f family machines, loongson2f have a specific feature: when we set it's frequency to ZERO, it will go into a wait mode, and then can be waked up by the external interrupt. so, if we setup suitable interrupts before putting it into wait mode, we will be able wake it up whenever we want via sending the relative interrupts to it. These interrupts are board-specific, Yeeloong2F use the keyboard interrupt and SCI interrupt, but LingLoong and Fuloong2F use the interrupts connected to the processors directly. and BTW: some old LingLoong and FuLoong2F have no such interrupts connected, so, there is no way to wake them up from suspend mode. and therefore, please do not enable the kernel support for them. The board-specific support will be added in the coming patches. Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com> Cc: linux-mips@linux-mips.org Cc: yanh@lemote.com Cc: huhb@lemote.com Cc: Wu Zhangjin <wuzhangjin@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: linux-pm@lists.linux-foundation.org Patchwork: http://patchwork.linux-mips.org/patch/629/ Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2009-11-10 23:57:05 -07:00
			`#`
			`# Suspend Support`
			`#`

			`obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o`