Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/tty/serial/sh-sci.h

39 lines
1.6 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include <linux/serial_core.h>
serial: sh-sci: Depend on HAVE_CLK unconditionally. The sh-sci code conditionalized the clock framework support in order to give the other platforms a chance to catch up. sh64 supported this some time ago and the forthcoming ARM changes handle this as well, this leaves h8300 as the odd one out. H8300 has had since 2.5 to merge it's sh-sci support upstream, and has yet to do so. At this point I will no longer be holding back the driver to support an unreponsive architecture, 7 years is quite enough of a grace period. Support is easily implemented on the architecture if and when it ever decides to merge its changes upstream. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-11-25 00:23:35 -07:00
#include <linux/io.h>
sh: use gpiolib This patch updates the SuperH gpio code to make use of gpiolib. The gpiolib callbacks get() and set() are lockless, but we use our own spinlock for the other operations to make sure hardware register bitfield accesses stay atomic. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-25 02:17:34 -07:00
#include <linux/gpio.h>
sh: Add SH7720 CPU support. This adds support for the SH7720 (SH3-DSP) CPU. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-19 17:59:33 -06:00
serial: sh-sci: Kill off all of the SCI/SCIF special casing. This was added at a time when the compiler did a less than stellar job of optimizing out dead code. These days this tends to be less of a concern, so kill it all off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-02 04:47:12 -06:00
#define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND)
#define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF)
#define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE)
#define SCxSR_FER(port) (((port)->type == PORT_SCI) ? SCI_FER : SCIF_FER)
#define SCxSR_PER(port) (((port)->type == PORT_SCI) ? SCI_PER : SCIF_PER)
#define SCxSR_BRK(port) (((port)->type == PORT_SCI) ? 0x00 : SCIF_BRK)
serial: sh-sci: Generalize overrun handling. This consolidates all of the broken out overrun handling and ensures that we have sensible defaults per-port type, in addition to making sure that overruns are flagged appropriately in the error mask for parts that haven't explicitly disabled support for it. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-06-08 03:19:37 -06:00
serial: sh-sci: Move overrun_bit and error_mask fields out of pdata None of the fields is ever set by board code, and both of them are set in the driver at probe time. Move them out of struct plat_sci_port to struct sci_port. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-06 02:59:17 -07:00
#define SCxSR_ERRORS(port) (to_sci_port(port)->error_mask)
serial: sh-sci: Kill off all of the SCI/SCIF special casing. This was added at a time when the compiler did a less than stellar job of optimizing out dead code. These days this tends to be less of a concern, so kill it all off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-10-02 04:47:12 -06:00
sh: Add SH7720 CPU support. This adds support for the SH7720 (SH3-DSP) CPU. Signed-off by: Markus Brunner <super.firetwister@gmail.com> Signed-off by: Mark Jonas <toertel@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-19 17:59:33 -06:00
#if defined(CONFIG_CPU_SUBTYPE_SH7705) || \
sh: Add support for SH7721 CPU subtype. Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-12-25 19:45:06 -07:00
defined(CONFIG_CPU_SUBTYPE_SH7720) || \
serial: sh-sci: Support ARM-based SH-Mobile CPUs. Add support for ARM-based SH-Mobile CPUs to the sh-sci driver. Also remove the SCLSR register that is missing on sh772x, sh7705 and SH-Mobile. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 04:15:33 -07:00
defined(CONFIG_CPU_SUBTYPE_SH7721) || \
ARM: mach-shmobile: Initial AG5 and AG5EVM support This patch adds initial support for Renesas SH-Mobile AG5. At this point the AG5 CPU support is limited to the ARM core, SCIF serial and a CMT timer together with L2 cache and the GIC. The AG5EVM board also supports Ethernet. Future patches will add support for GPIO, INTCS, CPGA and platform data / driver updates for devices such as IIC, LCDC, FSI, KEYSC, CEU and SDHI among others. The code in entry-macro.S will be cleaned up when the ARM IRQ demux code improvements have been merged. Depends on the AG5EVM mach-type recently registered but not yet present in arch/arm/tools/mach-types. As the AG5EVM board comes with 512MiB memory it is recommended to turn on HIGHMEM. Many thanks to Yoshii-san for initial bring up. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-17 03:59:31 -07:00
defined(CONFIG_ARCH_SH73A0) || \
ARM: mach-shmobile: R-Mobile A1 support. This adds preliminary support for the R8A7740 (R-Mobile A1) CPU Timer, serial, gic, clock are supported at this point. This patch is based on v0.1 manual Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-11-10 19:45:52 -07:00
defined(CONFIG_ARCH_SH7372) || \
defined(CONFIG_ARCH_R8A7740)
serial: sh-sci: use serial_port_in/out vs sci_in/out. Follows the 8250 change for pretty much the same rationale. See commit "serial: use serial_port_in/out vs serial_in/out in 8250". Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2012-03-30 04:50:15 -06:00
# define SCxSR_RDxF_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfffc)
# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73)
# define SCxSR_TDxE_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffdf)
# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#else
# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc)
# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073)
# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df)
# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3)
#endif
/* SCFCR */
#define SCFCR_RFRST 0x0002
#define SCFCR_TFRST 0x0004
#define SCFCR_MCE 0x0008
#define SCI_MAJOR 204
#define SCI_MINOR_START 8
Reference in a new issue Copy permalink