kernel-fxtec-pro1x/arch/sparc64/mm/ultra.S

682 lines
16 KiB
ArmAsm
Raw Normal View History

/* $Id: ultra.S,v 1.72 2002/02/09 19:49:31 davem Exp $
* ultra.S: Don't expand these all over the place...
*
* Copyright (C) 1997, 2000 David S. Miller (davem@redhat.com)
*/
#include <linux/config.h>
#include <asm/asi.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/spitfire.h>
#include <asm/mmu_context.h>
#include <asm/mmu.h>
#include <asm/pil.h>
#include <asm/head.h>
#include <asm/thread_info.h>
#include <asm/cacheflush.h>
#include <asm/hypervisor.h>
/* Basically, most of the Spitfire vs. Cheetah madness
* has to do with the fact that Cheetah does not support
* IMMU flushes out of the secondary context. Someone needs
* to throw a south lake birthday party for the folks
* in Microelectronics who refused to fix this shit.
*/
/* This file is meant to be read efficiently by the CPU, not humans.
* Staraj sie tego nikomu nie pierdolnac...
*/
.text
.align 32
.globl __flush_tlb_mm
__flush_tlb_mm: /* 18 insns */
/* %o0=(ctx & TAG_CONTEXT_BITS), %o1=SECONDARY_CONTEXT */
ldxa [%o1] ASI_DMMU, %g2
cmp %g2, %o0
bne,pn %icc, __spitfire_flush_tlb_mm_slow
mov 0x50, %g3
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
sethi %hi(KERNBASE), %g3
flush %g3
retl
nop
nop
nop
nop
nop
nop
nop
nop
nop
nop
.align 32
.globl __flush_tlb_pending
__flush_tlb_pending: /* 26 insns */
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
rdpr %pstate, %g7
sllx %o1, 3, %o1
andn %g7, PSTATE_IE, %g2
wrpr %g2, %pstate
mov SECONDARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
stxa %o0, [%o4] ASI_DMMU
1: sub %o1, (1 << 3), %o1
ldx [%o2 + %o1], %o3
andcc %o3, 1, %g0
andn %o3, 1, %o3
be,pn %icc, 2f
or %o3, 0x10, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
2: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
brnz,pt %o1, 1b
nop
stxa %g2, [%o4] ASI_DMMU
sethi %hi(KERNBASE), %o4
flush %o4
retl
wrpr %g7, 0x0, %pstate
nop
nop
nop
nop
.align 32
.globl __flush_tlb_kernel_range
__flush_tlb_kernel_range: /* 14 insns */
/* %o0=start, %o1=end */
cmp %o0, %o1
be,pn %xcc, 2f
sethi %hi(PAGE_SIZE), %o4
sub %o1, %o0, %o3
sub %o3, %o4, %o3
or %o0, 0x20, %o0 ! Nucleus
1: stxa %g0, [%o0 + %o3] ASI_DMMU_DEMAP
stxa %g0, [%o0 + %o3] ASI_IMMU_DEMAP
membar #Sync
brnz,pt %o3, 1b
sub %o3, %o4, %o3
2: sethi %hi(KERNBASE), %o3
flush %o3
retl
nop
nop
__spitfire_flush_tlb_mm_slow:
rdpr %pstate, %g1
wrpr %g1, PSTATE_IE, %pstate
stxa %o0, [%o1] ASI_DMMU
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
flush %g6
stxa %g2, [%o1] ASI_DMMU
sethi %hi(KERNBASE), %o1
flush %o1
retl
wrpr %g1, 0, %pstate
/*
* The following code flushes one page_size worth.
*/
#if (PAGE_SHIFT == 13)
#define ITAG_MASK 0xfe
#elif (PAGE_SHIFT == 16)
#define ITAG_MASK 0x7fe
#else
#error unsupported PAGE_SIZE
#endif
.section .kprobes.text, "ax"
.align 32
.globl __flush_icache_page
__flush_icache_page: /* %o0 = phys_page */
membar #StoreStore
srlx %o0, PAGE_SHIFT, %o0
sethi %uhi(PAGE_OFFSET), %g1
sllx %o0, PAGE_SHIFT, %o0
sethi %hi(PAGE_SIZE), %g2
sllx %g1, 32, %g1
add %o0, %g1, %o0
1: subcc %g2, 32, %g2
bne,pt %icc, 1b
flush %o0 + %g2
retl
nop
#ifdef DCACHE_ALIASING_POSSIBLE
#if (PAGE_SHIFT != 13)
#error only page shift of 13 is supported by dcache flush
#endif
#define DTAG_MASK 0x3
/* This routine is Spitfire specific so the hardcoded
* D-cache size and line-size are OK.
*/
.align 64
.globl __flush_dcache_page
__flush_dcache_page: /* %o0=kaddr, %o1=flush_icache */
sethi %uhi(PAGE_OFFSET), %g1
sllx %g1, 32, %g1
sub %o0, %g1, %o0 ! physical address
srlx %o0, 11, %o0 ! make D-cache TAG
sethi %hi(1 << 14), %o2 ! D-cache size
sub %o2, (1 << 5), %o2 ! D-cache line size
1: ldxa [%o2] ASI_DCACHE_TAG, %o3 ! load D-cache TAG
andcc %o3, DTAG_MASK, %g0 ! Valid?
be,pn %xcc, 2f ! Nope, branch
andn %o3, DTAG_MASK, %o3 ! Clear valid bits
cmp %o3, %o0 ! TAG match?
bne,pt %xcc, 2f ! Nope, branch
nop
stxa %g0, [%o2] ASI_DCACHE_TAG ! Invalidate TAG
membar #Sync
2: brnz,pt %o2, 1b
sub %o2, (1 << 5), %o2 ! D-cache line size
/* The I-cache does not snoop local stores so we
* better flush that too when necessary.
*/
brnz,pt %o1, __flush_icache_page
sllx %o0, 11, %o0
retl
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
.previous
/* Cheetah specific versions, patched at boot time. */
__cheetah_flush_tlb_mm: /* 19 insns */
rdpr %pstate, %g7
andn %g7, PSTATE_IE, %g2
wrpr %g2, 0x0, %pstate
wrpr %g0, 1, %tl
mov PRIMARY_CONTEXT, %o2
mov 0x40, %g3
ldxa [%o2] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o1
sllx %o1, CTX_PGSZ1_NUC_SHIFT, %o1
or %o0, %o1, %o0 /* Preserve nucleus page size fields */
stxa %o0, [%o2] ASI_DMMU
stxa %g0, [%g3] ASI_DMMU_DEMAP
stxa %g0, [%g3] ASI_IMMU_DEMAP
stxa %g2, [%o2] ASI_DMMU
sethi %hi(KERNBASE), %o2
flush %o2
wrpr %g0, 0, %tl
retl
wrpr %g7, 0x0, %pstate
__cheetah_flush_tlb_pending: /* 27 insns */
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
rdpr %pstate, %g7
sllx %o1, 3, %o1
andn %g7, PSTATE_IE, %g2
wrpr %g2, 0x0, %pstate
wrpr %g0, 1, %tl
mov PRIMARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o3
sllx %o3, CTX_PGSZ1_NUC_SHIFT, %o3
or %o0, %o3, %o0 /* Preserve nucleus page size fields */
stxa %o0, [%o4] ASI_DMMU
1: sub %o1, (1 << 3), %o1
ldx [%o2 + %o1], %o3
andcc %o3, 1, %g0
be,pn %icc, 2f
andn %o3, 1, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
2: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
brnz,pt %o1, 1b
nop
stxa %g2, [%o4] ASI_DMMU
sethi %hi(KERNBASE), %o4
flush %o4
wrpr %g0, 0, %tl
retl
wrpr %g7, 0x0, %pstate
#ifdef DCACHE_ALIASING_POSSIBLE
__cheetah_flush_dcache_page: /* 11 insns */
sethi %uhi(PAGE_OFFSET), %g1
sllx %g1, 32, %g1
sub %o0, %g1, %o0
sethi %hi(PAGE_SIZE), %o4
1: subcc %o4, (1 << 5), %o4
stxa %g0, [%o0 + %o4] ASI_DCACHE_INVALIDATE
membar #Sync
bne,pt %icc, 1b
nop
retl /* I-cache flush never needed on Cheetah, see callers. */
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
/* Hypervisor specific versions, patched at boot time. */
__hypervisor_flush_tlb_mm: /* 8 insns */
mov %o0, %o2 /* ARG2: mmu context */
mov 0, %o0 /* ARG0: CPU lists unimplemented */
mov 0, %o1 /* ARG1: CPU lists unimplemented */
mov HV_MMU_ALL, %o3 /* ARG3: flags */
mov HV_FAST_MMU_DEMAP_CTX, %o5
ta HV_FAST_TRAP
retl
nop
__hypervisor_flush_tlb_pending: /* 15 insns */
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
sllx %o1, 3, %g1
mov %o2, %g2
mov %o0, %g3
1: sub %g1, (1 << 3), %g1
ldx [%g2 + %g1], %o0 /* ARG0: vaddr + IMMU-bit */
mov %g3, %o1 /* ARG1: mmu context */
mov HV_MMU_DMMU, %o2
andcc %o0, 1, %g0
movne %icc, HV_MMU_ALL, %o2 /* ARG2: flags */
andn %o0, 1, %o0
ta HV_MMU_UNMAP_ADDR_TRAP
brnz,pt %g1, 1b
nop
retl
nop
__hypervisor_flush_tlb_kernel_range: /* 14 insns */
/* %o0=start, %o1=end */
cmp %o0, %o1
be,pn %xcc, 2f
sethi %hi(PAGE_SIZE), %g3
mov %o0, %g1
sub %o1, %g1, %g2
sub %g2, %g3, %g2
1: add %g1, %g2, %o0 /* ARG0: virtual address */
mov 0, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
ta HV_MMU_UNMAP_ADDR_TRAP
brnz,pt %g2, 1b
sub %g2, %g3, %g2
2: retl
nop
#ifdef DCACHE_ALIASING_POSSIBLE
/* XXX Niagara and friends have an 8K cache, so no aliasing is
* XXX possible, but nothing explicit in the Hypervisor API
* XXX guarantees this.
*/
__hypervisor_flush_dcache_page: /* 2 insns */
retl
nop
#endif
tlb_patch_one:
1: lduw [%o1], %g1
stw %g1, [%o0]
flush %o0
subcc %o2, 1, %o2
add %o1, 4, %o1
bne,pt %icc, 1b
add %o0, 4, %o0
retl
nop
.globl cheetah_patch_cachetlbops
cheetah_patch_cachetlbops:
save %sp, -128, %sp
sethi %hi(__flush_tlb_mm), %o0
or %o0, %lo(__flush_tlb_mm), %o0
sethi %hi(__cheetah_flush_tlb_mm), %o1
or %o1, %lo(__cheetah_flush_tlb_mm), %o1
call tlb_patch_one
mov 19, %o2
sethi %hi(__flush_tlb_pending), %o0
or %o0, %lo(__flush_tlb_pending), %o0
sethi %hi(__cheetah_flush_tlb_pending), %o1
or %o1, %lo(__cheetah_flush_tlb_pending), %o1
call tlb_patch_one
mov 27, %o2
#ifdef DCACHE_ALIASING_POSSIBLE
sethi %hi(__flush_dcache_page), %o0
or %o0, %lo(__flush_dcache_page), %o0
sethi %hi(__cheetah_flush_dcache_page), %o1
or %o1, %lo(__cheetah_flush_dcache_page), %o1
call tlb_patch_one
mov 11, %o2
#endif /* DCACHE_ALIASING_POSSIBLE */
ret
restore
#ifdef CONFIG_SMP
/* These are all called by the slaves of a cross call, at
* trap level 1, with interrupts fully disabled.
*
* Register usage:
* %g5 mm->context (all tlb flushes)
* %g1 address arg 1 (tlb page and range flushes)
* %g7 address arg 2 (tlb range flush only)
*
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
* %g6 scratch 1
* %g2 scratch 2
* %g3 scratch 3
* %g4 scratch 4
*/
.align 32
.globl xcall_flush_tlb_mm
xcall_flush_tlb_mm: /* 18 insns */
mov PRIMARY_CONTEXT, %g2
ldxa [%g2] ASI_DMMU, %g3
srlx %g3, CTX_PGSZ1_NUC_SHIFT, %g4
sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4
or %g5, %g4, %g5 /* Preserve nucleus page size fields */
stxa %g5, [%g2] ASI_DMMU
mov 0x40, %g4
stxa %g0, [%g4] ASI_DMMU_DEMAP
stxa %g0, [%g4] ASI_IMMU_DEMAP
stxa %g3, [%g2] ASI_DMMU
retry
nop
nop
nop
nop
nop
nop
nop
.globl xcall_flush_tlb_pending
xcall_flush_tlb_pending: /* 20 insns */
/* %g5=context, %g1=nr, %g7=vaddrs[] */
sllx %g1, 3, %g1
mov PRIMARY_CONTEXT, %g4
ldxa [%g4] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %g4
sllx %g4, CTX_PGSZ1_NUC_SHIFT, %g4
or %g5, %g4, %g5
mov PRIMARY_CONTEXT, %g4
stxa %g5, [%g4] ASI_DMMU
1: sub %g1, (1 << 3), %g1
ldx [%g7 + %g1], %g5
andcc %g5, 0x1, %g0
be,pn %icc, 2f
andn %g5, 0x1, %g5
stxa %g0, [%g5] ASI_IMMU_DEMAP
2: stxa %g0, [%g5] ASI_DMMU_DEMAP
membar #Sync
brnz,pt %g1, 1b
nop
stxa %g2, [%g4] ASI_DMMU
retry
.globl xcall_flush_tlb_kernel_range
xcall_flush_tlb_kernel_range: /* 22 insns */
sethi %hi(PAGE_SIZE - 1), %g2
or %g2, %lo(PAGE_SIZE - 1), %g2
andn %g1, %g2, %g1
andn %g7, %g2, %g7
sub %g7, %g1, %g3
add %g2, 1, %g2
sub %g3, %g2, %g3
or %g1, 0x20, %g1 ! Nucleus
1: stxa %g0, [%g1 + %g3] ASI_DMMU_DEMAP
stxa %g0, [%g1 + %g3] ASI_IMMU_DEMAP
membar #Sync
brnz,pt %g3, 1b
sub %g3, %g2, %g3
retry
nop
nop
nop
nop
nop
nop
nop
nop
/* This runs in a very controlled environment, so we do
* not need to worry about BH races etc.
*/
.globl xcall_sync_tick
xcall_sync_tick:
rdpr %pstate, %g2
wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate
rdpr %pil, %g2
wrpr %g0, 15, %pil
sethi %hi(109f), %g7
b,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
call smp_synchronize_tick_client
nop
clr %l6
b rtrap_xcall
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
/* NOTE: This is SPECIAL!! We do etrap/rtrap however
* we choose to deal with the "BH's run with
* %pil==15" problem (described in asm/pil.h)
* by just invoking rtrap directly past where
* BH's are checked for.
*
* We do it like this because we do not want %pil==15
* lockups to prevent regs being reported.
*/
.globl xcall_report_regs
xcall_report_regs:
rdpr %pstate, %g2
wrpr %g2, PSTATE_IG | PSTATE_AG, %pstate
rdpr %pil, %g2
wrpr %g0, 15, %pil
sethi %hi(109f), %g7
b,pt %xcc, etrap_irq
109: or %g7, %lo(109b), %g7
call __show_regs
add %sp, PTREGS_OFF, %o0
clr %l6
/* Has to be a non-v9 branch due to the large distance. */
b rtrap_xcall
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
#ifdef DCACHE_ALIASING_POSSIBLE
.align 32
.globl xcall_flush_dcache_page_cheetah
xcall_flush_dcache_page_cheetah: /* %g1 == physical page address */
sethi %hi(PAGE_SIZE), %g3
1: subcc %g3, (1 << 5), %g3
stxa %g0, [%g1 + %g3] ASI_DCACHE_INVALIDATE
membar #Sync
bne,pt %icc, 1b
nop
retry
nop
#endif /* DCACHE_ALIASING_POSSIBLE */
.globl xcall_flush_dcache_page_spitfire
xcall_flush_dcache_page_spitfire: /* %g1 == physical page address
%g7 == kernel page virtual address
%g5 == (page->mapping != NULL) */
#ifdef DCACHE_ALIASING_POSSIBLE
srlx %g1, (13 - 2), %g1 ! Form tag comparitor
sethi %hi(L1DCACHE_SIZE), %g3 ! D$ size == 16K
sub %g3, (1 << 5), %g3 ! D$ linesize == 32
1: ldxa [%g3] ASI_DCACHE_TAG, %g2
andcc %g2, 0x3, %g0
be,pn %xcc, 2f
andn %g2, 0x3, %g2
cmp %g2, %g1
bne,pt %xcc, 2f
nop
stxa %g0, [%g3] ASI_DCACHE_TAG
membar #Sync
2: cmp %g3, 0
bne,pt %xcc, 1b
sub %g3, (1 << 5), %g3
brz,pn %g5, 2f
#endif /* DCACHE_ALIASING_POSSIBLE */
sethi %hi(PAGE_SIZE), %g3
1: flush %g7
subcc %g3, (1 << 5), %g3
bne,pt %icc, 1b
add %g7, (1 << 5), %g7
2: retry
nop
nop
.globl __hypervisor_xcall_flush_tlb_mm
__hypervisor_xcall_flush_tlb_mm: /* 18 insns */
/* %g5=ctx, g1,g2,g3,g4,g7=scratch, %g6=unusable */
mov %o0, %g2
mov %o1, %g3
mov %o2, %g4
mov %o3, %g1
mov %o5, %g7
clr %o0 /* ARG0: CPU lists unimplemented */
clr %o1 /* ARG1: CPU lists unimplemented */
mov %g5, %o2 /* ARG2: mmu context */
mov HV_MMU_ALL, %o3 /* ARG3: flags */
mov HV_FAST_MMU_DEMAP_CTX, %o5
ta HV_FAST_TRAP
mov %g2, %o0
mov %g3, %o1
mov %g4, %o2
mov %g1, %o3
mov %g7, %o5
membar #Sync
retry
.globl __hypervisor_xcall_flush_tlb_pending
__hypervisor_xcall_flush_tlb_pending: /* 18 insns */
/* %g5=ctx, %g1=nr, %g7=vaddrs[], %g2,%g3,%g4=scratch, %g6=unusable */
sllx %g1, 3, %g1
mov %o0, %g2
mov %o1, %g3
mov %o2, %g4
1: sub %g1, (1 << 3), %g1
ldx [%g7 + %g1], %o0 /* ARG0: virtual address */
mov %g5, %o1 /* ARG1: mmu context */
mov HV_MMU_DMMU, %o2
andcc %o0, 1, %g0
movne %icc, HV_MMU_ALL, %o2 /* ARG2: flags */
ta HV_MMU_UNMAP_ADDR_TRAP
brnz,pt %g1, 1b
nop
mov %g2, %o0
mov %g3, %o1
mov %g4, %o2
membar #Sync
retry
.globl __hypervisor_xcall_flush_tlb_kernel_range
__hypervisor_xcall_flush_tlb_kernel_range: /* 22 insns */
/* %g1=start, %g7=end, g2,g3,g4,g5=scratch, g6=unusable */
sethi %hi(PAGE_SIZE - 1), %g2
or %g2, %lo(PAGE_SIZE - 1), %g2
andn %g1, %g2, %g1
andn %g7, %g2, %g7
sub %g7, %g1, %g3
add %g2, 1, %g2
sub %g3, %g2, %g3
mov %o0, %g2
mov %o1, %g4
mov %o2, %g5
1: add %g1, %g3, %o0 /* ARG0: virtual address */
mov 0, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
ta HV_MMU_UNMAP_ADDR_TRAP
sethi %hi(PAGE_SIZE), %o2
brnz,pt %g3, 1b
sub %g3, %o2, %g3
mov %g2, %o0
mov %g4, %o1
mov %g5, %o2
membar #Sync
retry
/* These just get rescheduled to PIL vectors. */
.globl xcall_call_function
xcall_call_function:
wr %g0, (1 << PIL_SMP_CALL_FUNC), %set_softint
retry
.globl xcall_receive_signal
xcall_receive_signal:
wr %g0, (1 << PIL_SMP_RECEIVE_SIGNAL), %set_softint
retry
.globl xcall_capture
xcall_capture:
wr %g0, (1 << PIL_SMP_CAPTURE), %set_softint
retry
#endif /* CONFIG_SMP */
.globl hypervisor_patch_cachetlbops
hypervisor_patch_cachetlbops:
save %sp, -128, %sp
sethi %hi(__flush_tlb_mm), %o0
or %o0, %lo(__flush_tlb_mm), %o0
sethi %hi(__hypervisor_flush_tlb_mm), %o1
or %o1, %lo(__hypervisor_flush_tlb_mm), %o1
call tlb_patch_one
mov 8, %o2
sethi %hi(__flush_tlb_pending), %o0
or %o0, %lo(__flush_tlb_pending), %o0
sethi %hi(__hypervisor_flush_tlb_pending), %o1
or %o1, %lo(__hypervisor_flush_tlb_pending), %o1
call tlb_patch_one
mov 15, %o2
sethi %hi(__flush_tlb_kernel_range), %o0
or %o0, %lo(__flush_tlb_kernel_range), %o0
sethi %hi(__hypervisor_flush_tlb_kernel_range), %o1
or %o1, %lo(__hypervisor_flush_tlb_kernel_range), %o1
call tlb_patch_one
mov 14, %o2
#ifdef DCACHE_ALIASING_POSSIBLE
sethi %hi(__flush_dcache_page), %o0
or %o0, %lo(__flush_dcache_page), %o0
sethi %hi(__hypervisor_flush_dcache_page), %o1
or %o1, %lo(__hypervisor_flush_dcache_page), %o1
call tlb_patch_one
mov 2, %o2
#endif /* DCACHE_ALIASING_POSSIBLE */
#ifdef CONFIG_SMP
sethi %hi(xcall_flush_tlb_mm), %o0
or %o0, %lo(xcall_flush_tlb_mm), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_mm), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_mm), %o1
call tlb_patch_one
mov 18, %o2
sethi %hi(xcall_flush_tlb_pending), %o0
or %o0, %lo(xcall_flush_tlb_pending), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_pending), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_pending), %o1
call tlb_patch_one
mov 18, %o2
sethi %hi(xcall_flush_tlb_kernel_range), %o0
or %o0, %lo(xcall_flush_tlb_kernel_range), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_kernel_range), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_kernel_range), %o1
call tlb_patch_one
mov 22, %o2
#endif /* CONFIG_SMP */
ret
restore