Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/net/wireless/nl80211.h

63 lines
2.6 KiB
C
Raw Normal View History

[NL80211]: add netlink interface to cfg80211 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-20 11:09:35 -06:00
#ifndef __NET_WIRELESS_NL80211_H
#define __NET_WIRELESS_NL80211_H
#include "core.h"
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:46 -06:00
int nl80211_init(void);
void nl80211_exit(void);
void nl80211_notify_dev_rename(struct cfg80211_registered_device *rdev);
void nl80211_send_scan_start(struct cfg80211_registered_device *rdev,
struct net_device *netdev);
void nl80211_send_scan_done(struct cfg80211_registered_device *rdev,
struct net_device *netdev);
void nl80211_send_scan_aborted(struct cfg80211_registered_device *rdev,
struct net_device *netdev);
void nl80211_send_reg_change_event(struct regulatory_request *request);
void nl80211_send_rx_auth(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:47 -06:00
const u8 *buf, size_t len, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:46 -06:00
void nl80211_send_rx_assoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:47 -06:00
const u8 *buf, size_t len, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:46 -06:00
void nl80211_send_deauth(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:47 -06:00
const u8 *buf, size_t len, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:46 -06:00
void nl80211_send_disassoc(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:47 -06:00
const u8 *buf, size_t len, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:46 -06:00
void nl80211_send_auth_timeout(struct cfg80211_registered_device *rdev,
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:47 -06:00
const u8 *addr, gfp_t gfp);
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:46 -06:00
void nl80211_send_assoc_timeout(struct cfg80211_registered_device *rdev,
nl80211: Generate deauth/disassoc event for locally generated frames Previously, nl80211 mlme events were generated only for received deauthentication and disassociation frames. We need to do the same for locally generated ones in order to let applications know that we disconnected (e.g., when AP does not reply to a probe). Rename the nl80211 and cfg80211 functions (s/rx_//) to make it clearer that they are used for both received and locally generated frames. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 12:53:56 -06:00
struct net_device *netdev,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:47 -06:00
const u8 *addr, gfp_t gfp);
cfg80211: connect/disconnect API This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:54 -06:00
void nl80211_send_connect_result(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
u16 status, gfp_t gfp);
void nl80211_send_roamed(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp);
void nl80211_send_disconnected(struct cfg80211_registered_device *rdev,
struct net_device *netdev, u16 reason,
cfg80211: fix locking Over time, a lot of locking issues have crept into the smarts of cfg80211, so e.g. scan completion can race against a new scan, IBSS join can race against leaving an IBSS, etc. Introduce a new per-interface lock that protects most of the per-interface data that we need to keep track of, and sprinkle assertions about that lock everywhere. Some things now need to be offloaded to work structs so that we don't require being able to sleep in functions the drivers call. The exception to that are the MLME callbacks (rx_auth etc.) that currently only mac80211 calls because it was easier to do that there instead of in cfg80211, and future drivers implementing those calls will, if they ever exist, probably need to use a similar scheme like mac80211 anyway... In order to be able to handle _deauth and _disassoc properly, introduce a cookie passed to it that will determine locking requirements. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-06 19:56:11 -06:00
const u8 *ie, size_t ie_len, bool from_ap);
cfg80211: connect/disconnect API This patch introduces the cfg80211 connect/disconnect API. The goal here is to run the AUTH and ASSOC steps in one call. This is needed for some fullmac cards that run both steps directly from the target, after the host driver sends a connect command. Additionally, all the new crypto parameters for connect() are now also valid for associate() -- although associate requires the IEs to be used, the information can be useful for drivers and should be given. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:54 -06:00
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:46 -06:00
void
nl80211: Add Michael MIC failure event Define a new nl80211 event, NL80211_CMD_MICHAEL_MIC_FAILURE, to be used to notify user space about locally detected Michael MIC failures. This matches with the MLME-MICHAELMICFAILURE.indication() primitive. Since we do not actually have TSC in the skb anymore when mac80211_ev_michael_mic_failure() is called, that function is changed to take in the TSC as an optional parameter instead of as a requirement to include the TSC after the hdr field (which we did not really follow). For now, TSC is not included in the events from mac80211, but it could be added at some point. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-27 13:59:49 -06:00
nl80211_michael_mic_failure(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *addr,
enum nl80211_key_type key_type,
cfg80211: use proper allocation flags Instead of hardcoding GFP_ATOMIC everywhere, add a new function parameter that gets the flags from the caller. Obviously then I need to update all callers (all of them in mac80211), and it turns out that now it's ok to use GFP_KERNEL in almost all places. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:47 -06:00
int key_id, const u8 *tsc, gfp_t gfp);
[NL80211]: add netlink interface to cfg80211 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-20 11:09:35 -06:00
nl80211: clean up function definitions I don't like the 'extern' keyword much when it's not necessary, it makes lines rather long. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-01 13:26:46 -06:00
void
cfg80211: send regulatory beacon hint events to userspace This informs userspace when a change has occured on a world roaming wiphy's channel which has lifted some restrictions due to a regulatory beacon hint. Because this is now sent to userspace through the regulatory multicast group we remove the debug prints we used to use as they are no longer necessary. Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-02 12:08:09 -06:00
nl80211_send_beacon_hint_event(struct wiphy *wiphy,
struct ieee80211_channel *channel_before,
struct ieee80211_channel *channel_after);
cfg80211/nl80211: add IBSS API This adds IBSS API along with (preliminary) wext handlers. The wext handlers can only do IBSS so you need to call them from your own wext handlers if the mode is IBSS. The nl80211 API requires * an SSID * a channel (frequency) for the case that a new IBSS has to be created It optionally supports * a flag to fix the channel * a fixed BSSID The cfg80211 code also takes care to leave the IBSS before the netdev is set down. If wireless extensions are used, it also caches values when the interface is down and instructs the driver to join when the interface is set up. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-04-19 13:24:32 -06:00
void nl80211_send_ibss_bssid(struct cfg80211_registered_device *rdev,
struct net_device *netdev, const u8 *bssid,
gfp_t gfp);
[NL80211]: add netlink interface to cfg80211 Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-20 11:09:35 -06:00
#endif /* __NET_WIRELESS_NL80211_H */
Reference in a new issue Copy permalink