kernel-fxtec-pro1x/sound/soc/codecs/twl4030.c

1313 lines
38 KiB
C
Raw Normal View History

/*
* ALSA SoC TWL4030 codec driver
*
* Author: Steve Sakoman, <steve@sakoman.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include "twl4030.h"
/*
* twl4030 register cache & default register settings
*/
static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = {
0x00, /* this register not used */
0x93, /* REG_CODEC_MODE (0x1) */
0xc3, /* REG_OPTION (0x2) */
0x00, /* REG_UNKNOWN (0x3) */
0x00, /* REG_MICBIAS_CTL (0x4) */
0x20, /* REG_ANAMICL (0x5) */
0x00, /* REG_ANAMICR (0x6) */
0x00, /* REG_AVADC_CTL (0x7) */
0x00, /* REG_ADCMICSEL (0x8) */
0x00, /* REG_DIGMIXING (0x9) */
0x0c, /* REG_ATXL1PGA (0xA) */
0x0c, /* REG_ATXR1PGA (0xB) */
0x00, /* REG_AVTXL2PGA (0xC) */
0x00, /* REG_AVTXR2PGA (0xD) */
0x01, /* REG_AUDIO_IF (0xE) */
0x00, /* REG_VOICE_IF (0xF) */
0x00, /* REG_ARXR1PGA (0x10) */
0x00, /* REG_ARXL1PGA (0x11) */
0x6c, /* REG_ARXR2PGA (0x12) */
0x6c, /* REG_ARXL2PGA (0x13) */
0x00, /* REG_VRXPGA (0x14) */
0x00, /* REG_VSTPGA (0x15) */
0x00, /* REG_VRX2ARXPGA (0x16) */
0x0c, /* REG_AVDAC_CTL (0x17) */
0x00, /* REG_ARX2VTXPGA (0x18) */
0x00, /* REG_ARXL1_APGA_CTL (0x19) */
0x00, /* REG_ARXR1_APGA_CTL (0x1A) */
0x4b, /* REG_ARXL2_APGA_CTL (0x1B) */
0x4b, /* REG_ARXR2_APGA_CTL (0x1C) */
0x00, /* REG_ATX2ARXPGA (0x1D) */
0x00, /* REG_BT_IF (0x1E) */
0x00, /* REG_BTPGA (0x1F) */
0x00, /* REG_BTSTPGA (0x20) */
0x00, /* REG_EAR_CTL (0x21) */
0x24, /* REG_HS_SEL (0x22) */
0x0a, /* REG_HS_GAIN_SET (0x23) */
0x00, /* REG_HS_POPN_SET (0x24) */
0x00, /* REG_PREDL_CTL (0x25) */
0x00, /* REG_PREDR_CTL (0x26) */
0x00, /* REG_PRECKL_CTL (0x27) */
0x00, /* REG_PRECKR_CTL (0x28) */
0x00, /* REG_HFL_CTL (0x29) */
0x00, /* REG_HFR_CTL (0x2A) */
0x00, /* REG_ALC_CTL (0x2B) */
0x00, /* REG_ALC_SET1 (0x2C) */
0x00, /* REG_ALC_SET2 (0x2D) */
0x00, /* REG_BOOST_CTL (0x2E) */
0x00, /* REG_SOFTVOL_CTL (0x2F) */
0x00, /* REG_DTMF_FREQSEL (0x30) */
0x00, /* REG_DTMF_TONEXT1H (0x31) */
0x00, /* REG_DTMF_TONEXT1L (0x32) */
0x00, /* REG_DTMF_TONEXT2H (0x33) */
0x00, /* REG_DTMF_TONEXT2L (0x34) */
0x00, /* REG_DTMF_TONOFF (0x35) */
0x00, /* REG_DTMF_WANONOFF (0x36) */
0x00, /* REG_I2S_RX_SCRAMBLE_H (0x37) */
0x00, /* REG_I2S_RX_SCRAMBLE_M (0x38) */
0x00, /* REG_I2S_RX_SCRAMBLE_L (0x39) */
0x16, /* REG_APLL_CTL (0x3A) */
0x00, /* REG_DTMF_CTL (0x3B) */
0x00, /* REG_DTMF_PGA_CTL2 (0x3C) */
0x00, /* REG_DTMF_PGA_CTL1 (0x3D) */
0x00, /* REG_MISC_SET_1 (0x3E) */
0x00, /* REG_PCMBTMUX (0x3F) */
0x00, /* not used (0x40) */
0x00, /* not used (0x41) */
0x00, /* not used (0x42) */
0x00, /* REG_RX_PATH_SEL (0x43) */
0x00, /* REG_VDL_APGA_CTL (0x44) */
0x00, /* REG_VIBRA_CTL (0x45) */
0x00, /* REG_VIBRA_SET (0x46) */
0x00, /* REG_VIBRA_PWM_SET (0x47) */
0x00, /* REG_ANAMIC_GAIN (0x48) */
0x00, /* REG_MISC_SET_2 (0x49) */
};
/*
* read twl4030 register cache
*/
static inline unsigned int twl4030_read_reg_cache(struct snd_soc_codec *codec,
unsigned int reg)
{
u8 *cache = codec->reg_cache;
return cache[reg];
}
/*
* write twl4030 register cache
*/
static inline void twl4030_write_reg_cache(struct snd_soc_codec *codec,
u8 reg, u8 value)
{
u8 *cache = codec->reg_cache;
if (reg >= TWL4030_CACHEREGNUM)
return;
cache[reg] = value;
}
/*
* write to the twl4030 register space
*/
static int twl4030_write(struct snd_soc_codec *codec,
unsigned int reg, unsigned int value)
{
twl4030_write_reg_cache(codec, reg, value);
return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg);
}
static void twl4030_clear_codecpdz(struct snd_soc_codec *codec)
{
u8 mode;
mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
twl4030_write(codec, TWL4030_REG_CODEC_MODE,
mode & ~TWL4030_CODECPDZ);
/* REVISIT: this delay is present in TI sample drivers */
/* but there seems to be no TRM requirement for it */
udelay(10);
}
static void twl4030_set_codecpdz(struct snd_soc_codec *codec)
{
u8 mode;
mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE);
twl4030_write(codec, TWL4030_REG_CODEC_MODE,
mode | TWL4030_CODECPDZ);
/* REVISIT: this delay is present in TI sample drivers */
/* but there seems to be no TRM requirement for it */
udelay(10);
}
static void twl4030_init_chip(struct snd_soc_codec *codec)
{
int i;
/* clear CODECPDZ prior to setting register defaults */
twl4030_clear_codecpdz(codec);
/* set all audio section registers to reasonable defaults */
for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++)
twl4030_write(codec, i, twl4030_reg[i]);
}
/* Earpiece */
static const char *twl4030_earpiece_texts[] =
{"Off", "DACL1", "DACL2", "DACR1"};
static const unsigned int twl4030_earpiece_values[] =
{0x0, 0x1, 0x2, 0x4};
static const struct soc_enum twl4030_earpiece_enum =
SOC_VALUE_ENUM_SINGLE(TWL4030_REG_EAR_CTL, 1, 0x7,
ARRAY_SIZE(twl4030_earpiece_texts),
twl4030_earpiece_texts,
twl4030_earpiece_values);
static const struct snd_kcontrol_new twl4030_dapm_earpiece_control =
SOC_DAPM_VALUE_ENUM("Route", twl4030_earpiece_enum);
/* PreDrive Left */
static const char *twl4030_predrivel_texts[] =
{"Off", "DACL1", "DACL2", "DACR2"};
static const unsigned int twl4030_predrivel_values[] =
{0x0, 0x1, 0x2, 0x4};
static const struct soc_enum twl4030_predrivel_enum =
SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDL_CTL, 1, 0x7,
ARRAY_SIZE(twl4030_predrivel_texts),
twl4030_predrivel_texts,
twl4030_predrivel_values);
static const struct snd_kcontrol_new twl4030_dapm_predrivel_control =
SOC_DAPM_VALUE_ENUM("Route", twl4030_predrivel_enum);
/* PreDrive Right */
static const char *twl4030_predriver_texts[] =
{"Off", "DACR1", "DACR2", "DACL2"};
static const unsigned int twl4030_predriver_values[] =
{0x0, 0x1, 0x2, 0x4};
static const struct soc_enum twl4030_predriver_enum =
SOC_VALUE_ENUM_SINGLE(TWL4030_REG_PREDR_CTL, 1, 0x7,
ARRAY_SIZE(twl4030_predriver_texts),
twl4030_predriver_texts,
twl4030_predriver_values);
static const struct snd_kcontrol_new twl4030_dapm_predriver_control =
SOC_DAPM_VALUE_ENUM("Route", twl4030_predriver_enum);
/* Headset Left */
static const char *twl4030_hsol_texts[] =
{"Off", "DACL1", "DACL2"};
static const struct soc_enum twl4030_hsol_enum =
SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 1,
ARRAY_SIZE(twl4030_hsol_texts),
twl4030_hsol_texts);
static const struct snd_kcontrol_new twl4030_dapm_hsol_control =
SOC_DAPM_ENUM("Route", twl4030_hsol_enum);
/* Headset Right */
static const char *twl4030_hsor_texts[] =
{"Off", "DACR1", "DACR2"};
static const struct soc_enum twl4030_hsor_enum =
SOC_ENUM_SINGLE(TWL4030_REG_HS_SEL, 4,
ARRAY_SIZE(twl4030_hsor_texts),
twl4030_hsor_texts);
static const struct snd_kcontrol_new twl4030_dapm_hsor_control =
SOC_DAPM_ENUM("Route", twl4030_hsor_enum);
/* Carkit Left */
static const char *twl4030_carkitl_texts[] =
{"Off", "DACL1", "DACL2"};
static const struct soc_enum twl4030_carkitl_enum =
SOC_ENUM_SINGLE(TWL4030_REG_PRECKL_CTL, 1,
ARRAY_SIZE(twl4030_carkitl_texts),
twl4030_carkitl_texts);
static const struct snd_kcontrol_new twl4030_dapm_carkitl_control =
SOC_DAPM_ENUM("Route", twl4030_carkitl_enum);
/* Carkit Right */
static const char *twl4030_carkitr_texts[] =
{"Off", "DACR1", "DACR2"};
static const struct soc_enum twl4030_carkitr_enum =
SOC_ENUM_SINGLE(TWL4030_REG_PRECKR_CTL, 1,
ARRAY_SIZE(twl4030_carkitr_texts),
twl4030_carkitr_texts);
static const struct snd_kcontrol_new twl4030_dapm_carkitr_control =
SOC_DAPM_ENUM("Route", twl4030_carkitr_enum);
/* Handsfree Left */
static const char *twl4030_handsfreel_texts[] =
{"Voice", "DACL1", "DACL2", "DACR2"};
static const struct soc_enum twl4030_handsfreel_enum =
SOC_ENUM_SINGLE(TWL4030_REG_HFL_CTL, 0,
ARRAY_SIZE(twl4030_handsfreel_texts),
twl4030_handsfreel_texts);
static const struct snd_kcontrol_new twl4030_dapm_handsfreel_control =
SOC_DAPM_ENUM("Route", twl4030_handsfreel_enum);
/* Handsfree Right */
static const char *twl4030_handsfreer_texts[] =
{"Voice", "DACR1", "DACR2", "DACL2"};
static const struct soc_enum twl4030_handsfreer_enum =
SOC_ENUM_SINGLE(TWL4030_REG_HFR_CTL, 0,
ARRAY_SIZE(twl4030_handsfreer_texts),
twl4030_handsfreer_texts);
static const struct snd_kcontrol_new twl4030_dapm_handsfreer_control =
SOC_DAPM_ENUM("Route", twl4030_handsfreer_enum);
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
/* Left analog microphone selection */
static const char *twl4030_analoglmic_texts[] =
{"Off", "Main mic", "Headset mic", "AUXL", "Carkit mic"};
static const unsigned int twl4030_analoglmic_values[] =
{0x0, 0x1, 0x2, 0x4, 0x8};
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
static const struct soc_enum twl4030_analoglmic_enum =
SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICL, 0, 0xf,
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
ARRAY_SIZE(twl4030_analoglmic_texts),
twl4030_analoglmic_texts,
twl4030_analoglmic_values);
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
static const struct snd_kcontrol_new twl4030_dapm_analoglmic_control =
SOC_DAPM_VALUE_ENUM("Route", twl4030_analoglmic_enum);
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
/* Right analog microphone selection */
static const char *twl4030_analogrmic_texts[] =
{"Off", "Sub mic", "AUXR"};
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
static const unsigned int twl4030_analogrmic_values[] =
{0x0, 0x1, 0x4};
static const struct soc_enum twl4030_analogrmic_enum =
SOC_VALUE_ENUM_SINGLE(TWL4030_REG_ANAMICR, 0, 0x5,
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
ARRAY_SIZE(twl4030_analogrmic_texts),
twl4030_analogrmic_texts,
twl4030_analogrmic_values);
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
static const struct snd_kcontrol_new twl4030_dapm_analogrmic_control =
SOC_DAPM_VALUE_ENUM("Route", twl4030_analogrmic_enum);
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
/* TX1 L/R Analog/Digital microphone selection */
static const char *twl4030_micpathtx1_texts[] =
{"Analog", "Digimic0"};
static const struct soc_enum twl4030_micpathtx1_enum =
SOC_ENUM_SINGLE(TWL4030_REG_ADCMICSEL, 0,
ARRAY_SIZE(twl4030_micpathtx1_texts),
twl4030_micpathtx1_texts);
static const struct snd_kcontrol_new twl4030_dapm_micpathtx1_control =
SOC_DAPM_ENUM("Route", twl4030_micpathtx1_enum);
/* TX2 L/R Analog/Digital microphone selection */
static const char *twl4030_micpathtx2_texts[] =
{"Analog", "Digimic1"};
static const struct soc_enum twl4030_micpathtx2_enum =
SOC_ENUM_SINGLE(TWL4030_REG_ADCMICSEL, 2,
ARRAY_SIZE(twl4030_micpathtx2_texts),
twl4030_micpathtx2_texts);
static const struct snd_kcontrol_new twl4030_dapm_micpathtx2_control =
SOC_DAPM_ENUM("Route", twl4030_micpathtx2_enum);
static int micpath_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
unsigned char adcmicsel, micbias_ctl;
adcmicsel = twl4030_read_reg_cache(w->codec, TWL4030_REG_ADCMICSEL);
micbias_ctl = twl4030_read_reg_cache(w->codec, TWL4030_REG_MICBIAS_CTL);
/* Prepare the bits for the given TX path:
* shift_l == 0: TX1 microphone path
* shift_l == 2: TX2 microphone path */
if (e->shift_l) {
/* TX2 microphone path */
if (adcmicsel & TWL4030_TX2IN_SEL)
micbias_ctl |= TWL4030_MICBIAS2_CTL; /* digimic */
else
micbias_ctl &= ~TWL4030_MICBIAS2_CTL;
} else {
/* TX1 microphone path */
if (adcmicsel & TWL4030_TX1IN_SEL)
micbias_ctl |= TWL4030_MICBIAS1_CTL; /* digimic */
else
micbias_ctl &= ~TWL4030_MICBIAS1_CTL;
}
twl4030_write(w->codec, TWL4030_REG_MICBIAS_CTL, micbias_ctl);
return 0;
}
static int handsfree_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct soc_enum *e = (struct soc_enum *)w->kcontrols->private_value;
unsigned char hs_ctl;
hs_ctl = twl4030_read_reg_cache(w->codec, e->reg);
if (hs_ctl & TWL4030_HF_CTL_REF_EN) {
hs_ctl |= TWL4030_HF_CTL_RAMP_EN;
twl4030_write(w->codec, e->reg, hs_ctl);
hs_ctl |= TWL4030_HF_CTL_LOOP_EN;
twl4030_write(w->codec, e->reg, hs_ctl);
hs_ctl |= TWL4030_HF_CTL_HB_EN;
twl4030_write(w->codec, e->reg, hs_ctl);
} else {
hs_ctl &= ~(TWL4030_HF_CTL_RAMP_EN | TWL4030_HF_CTL_LOOP_EN
| TWL4030_HF_CTL_HB_EN);
twl4030_write(w->codec, e->reg, hs_ctl);
}
return 0;
}
/*
* Some of the gain controls in TWL (mostly those which are associated with
* the outputs) are implemented in an interesting way:
* 0x0 : Power down (mute)
* 0x1 : 6dB
* 0x2 : 0 dB
* 0x3 : -6 dB
* Inverting not going to help with these.
* Custom volsw and volsw_2r get/put functions to handle these gain bits.
*/
#define SOC_DOUBLE_TLV_TWL4030(xname, xreg, shift_left, shift_right, xmax,\
xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw, \
.get = snd_soc_get_volsw_twl4030, \
.put = snd_soc_put_volsw_twl4030, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = xreg, .shift = shift_left, .rshift = shift_right,\
.max = xmax, .invert = xinvert} }
#define SOC_DOUBLE_R_TLV_TWL4030(xname, reg_left, reg_right, xshift, xmax,\
xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname),\
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE,\
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_2r, \
.get = snd_soc_get_volsw_r2_twl4030,\
.put = snd_soc_put_volsw_r2_twl4030, \
.private_value = (unsigned long)&(struct soc_mixer_control) \
{.reg = reg_left, .rreg = reg_right, .shift = xshift, \
.rshift = xshift, .max = xmax, .invert = xinvert} }
#define SOC_SINGLE_TLV_TWL4030(xname, xreg, xshift, xmax, xinvert, tlv_array) \
SOC_DOUBLE_TLV_TWL4030(xname, xreg, xshift, xshift, xmax, \
xinvert, tlv_array)
static int snd_soc_get_volsw_twl4030(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
unsigned int shift = mc->shift;
unsigned int rshift = mc->rshift;
int max = mc->max;
int mask = (1 << fls(max)) - 1;
ucontrol->value.integer.value[0] =
(snd_soc_read(codec, reg) >> shift) & mask;
if (ucontrol->value.integer.value[0])
ucontrol->value.integer.value[0] =
max + 1 - ucontrol->value.integer.value[0];
if (shift != rshift) {
ucontrol->value.integer.value[1] =
(snd_soc_read(codec, reg) >> rshift) & mask;
if (ucontrol->value.integer.value[1])
ucontrol->value.integer.value[1] =
max + 1 - ucontrol->value.integer.value[1];
}
return 0;
}
static int snd_soc_put_volsw_twl4030(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
unsigned int shift = mc->shift;
unsigned int rshift = mc->rshift;
int max = mc->max;
int mask = (1 << fls(max)) - 1;
unsigned short val, val2, val_mask;
val = (ucontrol->value.integer.value[0] & mask);
val_mask = mask << shift;
if (val)
val = max + 1 - val;
val = val << shift;
if (shift != rshift) {
val2 = (ucontrol->value.integer.value[1] & mask);
val_mask |= mask << rshift;
if (val2)
val2 = max + 1 - val2;
val |= val2 << rshift;
}
return snd_soc_update_bits(codec, reg, val_mask, val);
}
static int snd_soc_get_volsw_r2_twl4030(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
unsigned int reg2 = mc->rreg;
unsigned int shift = mc->shift;
int max = mc->max;
int mask = (1<<fls(max))-1;
ucontrol->value.integer.value[0] =
(snd_soc_read(codec, reg) >> shift) & mask;
ucontrol->value.integer.value[1] =
(snd_soc_read(codec, reg2) >> shift) & mask;
if (ucontrol->value.integer.value[0])
ucontrol->value.integer.value[0] =
max + 1 - ucontrol->value.integer.value[0];
if (ucontrol->value.integer.value[1])
ucontrol->value.integer.value[1] =
max + 1 - ucontrol->value.integer.value[1];
return 0;
}
static int snd_soc_put_volsw_r2_twl4030(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
unsigned int reg = mc->reg;
unsigned int reg2 = mc->rreg;
unsigned int shift = mc->shift;
int max = mc->max;
int mask = (1 << fls(max)) - 1;
int err;
unsigned short val, val2, val_mask;
val_mask = mask << shift;
val = (ucontrol->value.integer.value[0] & mask);
val2 = (ucontrol->value.integer.value[1] & mask);
if (val)
val = max + 1 - val;
if (val2)
val2 = max + 1 - val2;
val = val << shift;
val2 = val2 << shift;
err = snd_soc_update_bits(codec, reg, val_mask, val);
if (err < 0)
return err;
err = snd_soc_update_bits(codec, reg2, val_mask, val2);
return err;
}
/*
* FGAIN volume control:
* from -62 to 0 dB in 1 dB steps (mute instead of -63 dB)
*/
static DECLARE_TLV_DB_SCALE(digital_fine_tlv, -6300, 100, 1);
/*
* CGAIN volume control:
* 0 dB to 12 dB in 6 dB steps
* value 2 and 3 means 12 dB
*/
static DECLARE_TLV_DB_SCALE(digital_coarse_tlv, 0, 600, 0);
/*
* Analog playback gain
* -24 dB to 12 dB in 2 dB steps
*/
static DECLARE_TLV_DB_SCALE(analog_tlv, -2400, 200, 0);
/*
* Gain controls tied to outputs
* -6 dB to 6 dB in 6 dB steps (mute instead of -12)
*/
static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1);
/*
* Capture gain after the ADCs
* from 0 dB to 31 dB in 1 dB steps
*/
static DECLARE_TLV_DB_SCALE(digital_capture_tlv, 0, 100, 0);
/*
* Gain control for input amplifiers
* 0 dB to 30 dB in 6 dB steps
*/
static DECLARE_TLV_DB_SCALE(input_gain_tlv, 0, 600, 0);
static const struct snd_kcontrol_new twl4030_snd_controls[] = {
/* Common playback gain controls */
SOC_DOUBLE_R_TLV("DAC1 Digital Fine Playback Volume",
TWL4030_REG_ARXL1PGA, TWL4030_REG_ARXR1PGA,
0, 0x3f, 0, digital_fine_tlv),
SOC_DOUBLE_R_TLV("DAC2 Digital Fine Playback Volume",
TWL4030_REG_ARXL2PGA, TWL4030_REG_ARXR2PGA,
0, 0x3f, 0, digital_fine_tlv),
SOC_DOUBLE_R_TLV("DAC1 Digital Coarse Playback Volume",
TWL4030_REG_ARXL1PGA, TWL4030_REG_ARXR1PGA,
6, 0x2, 0, digital_coarse_tlv),
SOC_DOUBLE_R_TLV("DAC2 Digital Coarse Playback Volume",
TWL4030_REG_ARXL2PGA, TWL4030_REG_ARXR2PGA,
6, 0x2, 0, digital_coarse_tlv),
SOC_DOUBLE_R_TLV("DAC1 Analog Playback Volume",
TWL4030_REG_ARXL1_APGA_CTL, TWL4030_REG_ARXR1_APGA_CTL,
3, 0x12, 1, analog_tlv),
SOC_DOUBLE_R_TLV("DAC2 Analog Playback Volume",
TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL,
3, 0x12, 1, analog_tlv),
SOC_DOUBLE_R("DAC1 Analog Playback Switch",
TWL4030_REG_ARXL1_APGA_CTL, TWL4030_REG_ARXR1_APGA_CTL,
1, 1, 0),
SOC_DOUBLE_R("DAC2 Analog Playback Switch",
TWL4030_REG_ARXL2_APGA_CTL, TWL4030_REG_ARXR2_APGA_CTL,
1, 1, 0),
/* Separate output gain controls */
SOC_DOUBLE_R_TLV_TWL4030("PreDriv Playback Volume",
TWL4030_REG_PREDL_CTL, TWL4030_REG_PREDR_CTL,
4, 3, 0, output_tvl),
SOC_DOUBLE_TLV_TWL4030("Headset Playback Volume",
TWL4030_REG_HS_GAIN_SET, 0, 2, 3, 0, output_tvl),
SOC_DOUBLE_R_TLV_TWL4030("Carkit Playback Volume",
TWL4030_REG_PRECKL_CTL, TWL4030_REG_PRECKR_CTL,
4, 3, 0, output_tvl),
SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume",
TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl),
/* Common capture gain controls */
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume",
TWL4030_REG_ATXL1PGA, TWL4030_REG_ATXR1PGA,
0, 0x1f, 0, digital_capture_tlv),
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
SOC_DOUBLE_R_TLV("TX2 Digital Capture Volume",
TWL4030_REG_AVTXL2PGA, TWL4030_REG_AVTXR2PGA,
0, 0x1f, 0, digital_capture_tlv),
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
SOC_DOUBLE_TLV("Analog Capture Volume", TWL4030_REG_ANAMIC_GAIN,
0, 3, 5, 0, input_gain_tlv),
};
/* add non dapm controls */
static int twl4030_add_controls(struct snd_soc_codec *codec)
{
int err, i;
for (i = 0; i < ARRAY_SIZE(twl4030_snd_controls); i++) {
err = snd_ctl_add(codec->card,
snd_soc_cnew(&twl4030_snd_controls[i],
codec, NULL));
if (err < 0)
return err;
}
return 0;
}
static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = {
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
/* Left channel inputs */
SND_SOC_DAPM_INPUT("MAINMIC"),
SND_SOC_DAPM_INPUT("HSMIC"),
SND_SOC_DAPM_INPUT("AUXL"),
SND_SOC_DAPM_INPUT("CARKITMIC"),
/* Right channel inputs */
SND_SOC_DAPM_INPUT("SUBMIC"),
SND_SOC_DAPM_INPUT("AUXR"),
/* Digital microphones (Stereo) */
SND_SOC_DAPM_INPUT("DIGIMIC0"),
SND_SOC_DAPM_INPUT("DIGIMIC1"),
/* Outputs */
SND_SOC_DAPM_OUTPUT("OUTL"),
SND_SOC_DAPM_OUTPUT("OUTR"),
SND_SOC_DAPM_OUTPUT("EARPIECE"),
SND_SOC_DAPM_OUTPUT("PREDRIVEL"),
SND_SOC_DAPM_OUTPUT("PREDRIVER"),
SND_SOC_DAPM_OUTPUT("HSOL"),
SND_SOC_DAPM_OUTPUT("HSOR"),
SND_SOC_DAPM_OUTPUT("CARKITL"),
SND_SOC_DAPM_OUTPUT("CARKITR"),
SND_SOC_DAPM_OUTPUT("HFL"),
SND_SOC_DAPM_OUTPUT("HFR"),
/* DACs */
SND_SOC_DAPM_DAC("DAC Right1", "Right Front Playback",
TWL4030_REG_AVDAC_CTL, 0, 0),
SND_SOC_DAPM_DAC("DAC Left1", "Left Front Playback",
TWL4030_REG_AVDAC_CTL, 1, 0),
SND_SOC_DAPM_DAC("DAC Right2", "Right Rear Playback",
TWL4030_REG_AVDAC_CTL, 2, 0),
SND_SOC_DAPM_DAC("DAC Left2", "Left Rear Playback",
TWL4030_REG_AVDAC_CTL, 3, 0),
/* Analog PGAs */
SND_SOC_DAPM_PGA("ARXR1_APGA", TWL4030_REG_ARXR1_APGA_CTL,
0, 0, NULL, 0),
SND_SOC_DAPM_PGA("ARXL1_APGA", TWL4030_REG_ARXL1_APGA_CTL,
0, 0, NULL, 0),
SND_SOC_DAPM_PGA("ARXR2_APGA", TWL4030_REG_ARXR2_APGA_CTL,
0, 0, NULL, 0),
SND_SOC_DAPM_PGA("ARXL2_APGA", TWL4030_REG_ARXL2_APGA_CTL,
0, 0, NULL, 0),
/* Output MUX controls */
/* Earpiece */
SND_SOC_DAPM_VALUE_MUX("Earpiece Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_earpiece_control),
/* PreDrivL/R */
SND_SOC_DAPM_VALUE_MUX("PredriveL Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_predrivel_control),
SND_SOC_DAPM_VALUE_MUX("PredriveR Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_predriver_control),
/* HeadsetL/R */
SND_SOC_DAPM_MUX("HeadsetL Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_hsol_control),
SND_SOC_DAPM_MUX("HeadsetR Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_hsor_control),
/* CarkitL/R */
SND_SOC_DAPM_MUX("CarkitL Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_carkitl_control),
SND_SOC_DAPM_MUX("CarkitR Mux", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_carkitr_control),
/* HandsfreeL/R */
SND_SOC_DAPM_MUX_E("HandsfreeL Mux", TWL4030_REG_HFL_CTL, 5, 0,
&twl4030_dapm_handsfreel_control, handsfree_event,
SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
SND_SOC_DAPM_MUX_E("HandsfreeR Mux", TWL4030_REG_HFR_CTL, 5, 0,
&twl4030_dapm_handsfreer_control, handsfree_event,
SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD),
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
/* Introducing four virtual ADC, since TWL4030 have four channel for
capture */
SND_SOC_DAPM_ADC("ADC Virtual Left1", "Left Front Capture",
SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_ADC("ADC Virtual Right1", "Right Front Capture",
SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_ADC("ADC Virtual Left2", "Left Rear Capture",
SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_ADC("ADC Virtual Right2", "Right Rear Capture",
SND_SOC_NOPM, 0, 0),
/* Analog/Digital mic path selection.
TX1 Left/Right: either analog Left/Right or Digimic0
TX2 Left/Right: either analog Left/Right or Digimic1 */
SND_SOC_DAPM_MUX_E("TX1 Capture Route", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_micpathtx1_control, micpath_event,
SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
SND_SOC_DAPM_POST_REG),
SND_SOC_DAPM_MUX_E("TX2 Capture Route", SND_SOC_NOPM, 0, 0,
&twl4030_dapm_micpathtx2_control, micpath_event,
SND_SOC_DAPM_POST_PMU|SND_SOC_DAPM_POST_PMD|
SND_SOC_DAPM_POST_REG),
/* Analog input muxes with power switch for the physical ADCL/R */
SND_SOC_DAPM_VALUE_MUX("Analog Left Capture Route",
TWL4030_REG_AVADC_CTL, 3, 0, &twl4030_dapm_analoglmic_control),
SND_SOC_DAPM_VALUE_MUX("Analog Right Capture Route",
TWL4030_REG_AVADC_CTL, 1, 0, &twl4030_dapm_analogrmic_control),
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
SND_SOC_DAPM_PGA("Analog Left Amplifier",
TWL4030_REG_ANAMICL, 4, 0, NULL, 0),
SND_SOC_DAPM_PGA("Analog Right Amplifier",
TWL4030_REG_ANAMICR, 4, 0, NULL, 0),
SND_SOC_DAPM_PGA("Digimic0 Enable",
TWL4030_REG_ADCMICSEL, 1, 0, NULL, 0),
SND_SOC_DAPM_PGA("Digimic1 Enable",
TWL4030_REG_ADCMICSEL, 3, 0, NULL, 0),
SND_SOC_DAPM_MICBIAS("Mic Bias 1", TWL4030_REG_MICBIAS_CTL, 0, 0),
SND_SOC_DAPM_MICBIAS("Mic Bias 2", TWL4030_REG_MICBIAS_CTL, 1, 0),
SND_SOC_DAPM_MICBIAS("Headset Mic Bias", TWL4030_REG_MICBIAS_CTL, 2, 0),
};
static const struct snd_soc_dapm_route intercon[] = {
{"ARXL1_APGA", NULL, "DAC Left1"},
{"ARXR1_APGA", NULL, "DAC Right1"},
{"ARXL2_APGA", NULL, "DAC Left2"},
{"ARXR2_APGA", NULL, "DAC Right2"},
/* Internal playback routings */
/* Earpiece */
{"Earpiece Mux", "DACL1", "ARXL1_APGA"},
{"Earpiece Mux", "DACL2", "ARXL2_APGA"},
{"Earpiece Mux", "DACR1", "ARXR1_APGA"},
/* PreDrivL */
{"PredriveL Mux", "DACL1", "ARXL1_APGA"},
{"PredriveL Mux", "DACL2", "ARXL2_APGA"},
{"PredriveL Mux", "DACR2", "ARXR2_APGA"},
/* PreDrivR */
{"PredriveR Mux", "DACR1", "ARXR1_APGA"},
{"PredriveR Mux", "DACR2", "ARXR2_APGA"},
{"PredriveR Mux", "DACL2", "ARXL2_APGA"},
/* HeadsetL */
{"HeadsetL Mux", "DACL1", "ARXL1_APGA"},
{"HeadsetL Mux", "DACL2", "ARXL2_APGA"},
/* HeadsetR */
{"HeadsetR Mux", "DACR1", "ARXR1_APGA"},
{"HeadsetR Mux", "DACR2", "ARXR2_APGA"},
/* CarkitL */
{"CarkitL Mux", "DACL1", "ARXL1_APGA"},
{"CarkitL Mux", "DACL2", "ARXL2_APGA"},
/* CarkitR */
{"CarkitR Mux", "DACR1", "ARXR1_APGA"},
{"CarkitR Mux", "DACR2", "ARXR2_APGA"},
/* HandsfreeL */
{"HandsfreeL Mux", "DACL1", "ARXL1_APGA"},
{"HandsfreeL Mux", "DACL2", "ARXL2_APGA"},
{"HandsfreeL Mux", "DACR2", "ARXR2_APGA"},
/* HandsfreeR */
{"HandsfreeR Mux", "DACR1", "ARXR1_APGA"},
{"HandsfreeR Mux", "DACR2", "ARXR2_APGA"},
{"HandsfreeR Mux", "DACL2", "ARXL2_APGA"},
/* outputs */
{"OUTL", NULL, "ARXL2_APGA"},
{"OUTR", NULL, "ARXR2_APGA"},
{"EARPIECE", NULL, "Earpiece Mux"},
{"PREDRIVEL", NULL, "PredriveL Mux"},
{"PREDRIVER", NULL, "PredriveR Mux"},
{"HSOL", NULL, "HeadsetL Mux"},
{"HSOR", NULL, "HeadsetR Mux"},
{"CARKITL", NULL, "CarkitL Mux"},
{"CARKITR", NULL, "CarkitR Mux"},
{"HFL", NULL, "HandsfreeL Mux"},
{"HFR", NULL, "HandsfreeR Mux"},
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
/* Capture path */
{"Analog Left Capture Route", "Main mic", "MAINMIC"},
{"Analog Left Capture Route", "Headset mic", "HSMIC"},
{"Analog Left Capture Route", "AUXL", "AUXL"},
{"Analog Left Capture Route", "Carkit mic", "CARKITMIC"},
{"Analog Right Capture Route", "Sub mic", "SUBMIC"},
{"Analog Right Capture Route", "AUXR", "AUXR"},
{"Analog Left Amplifier", NULL, "Analog Left Capture Route"},
{"Analog Right Amplifier", NULL, "Analog Right Capture Route"},
{"Digimic0 Enable", NULL, "DIGIMIC0"},
{"Digimic1 Enable", NULL, "DIGIMIC1"},
/* TX1 Left capture path */
{"TX1 Capture Route", "Analog", "Analog Left Amplifier"},
{"TX1 Capture Route", "Digimic0", "Digimic0 Enable"},
/* TX1 Right capture path */
{"TX1 Capture Route", "Analog", "Analog Right Amplifier"},
{"TX1 Capture Route", "Digimic0", "Digimic0 Enable"},
/* TX2 Left capture path */
{"TX2 Capture Route", "Analog", "Analog Left Amplifier"},
{"TX2 Capture Route", "Digimic1", "Digimic1 Enable"},
/* TX2 Right capture path */
{"TX2 Capture Route", "Analog", "Analog Right Amplifier"},
{"TX2 Capture Route", "Digimic1", "Digimic1 Enable"},
{"ADC Virtual Left1", NULL, "TX1 Capture Route"},
{"ADC Virtual Right1", NULL, "TX1 Capture Route"},
{"ADC Virtual Left2", NULL, "TX2 Capture Route"},
{"ADC Virtual Right2", NULL, "TX2 Capture Route"},
};
static int twl4030_add_widgets(struct snd_soc_codec *codec)
{
snd_soc_dapm_new_controls(codec, twl4030_dapm_widgets,
ARRAY_SIZE(twl4030_dapm_widgets));
snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon));
snd_soc_dapm_new_widgets(codec);
return 0;
}
static void twl4030_power_up(struct snd_soc_codec *codec)
{
u8 anamicl, regmisc1, byte, popn;
int i = 0;
/* set CODECPDZ to turn on codec */
twl4030_set_codecpdz(codec);
/* initiate offset cancellation */
anamicl = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL);
twl4030_write(codec, TWL4030_REG_ANAMICL,
anamicl | TWL4030_CNCL_OFFSET_START);
ASoC: TWL4030: DAPM based capture implementation This patch adds DAPM implementaion for the capture path on twlx030. TWL has two physical ADC and two digital microphone (stereo) connections. The CPU interface has four microphone channels. For simplicity the microphone channel paths are named as: TX1 (Left/Right) - when using i2s mode, only the TX1 data is valid TX2 (Left/Right) Input routing (simplified version): There is two levels of mux settings for TWL in input path: Analog input mux: ADCL <- {Off, Main mic, Headset mic, AUXL, Carkit mic} ADCR <- {Off, Sub mic, AUXR} Analog/Digital mux: TX1 Analog mode: TX1L <- ADCL TX1R <- ADCR TX1 Digital mode: TX1L <- Digimic0 (Left) TX1R <- Digimic0 (Right) TX2 Analog mode: TX2L <- ADCL TX2R <- ADCR TX2 Digital mode: TX2L <- Digimic1 (Left) TX2R <- Digimic1 (Right) The patch provides the following user controls for the capture path: Mux settings: "TX1 Capture Route": {Analog, Digimic0} "TX2 Capture Route": {Analog, Digimic1} "Analog Left Capture Route": {Off, Main Mic, Headset Mic, AUXL, Carkit Mic} "Analog Right Capture Route": {Off, Sub Mic, AUXR} Volume/Gain controls: "TX1 Digital Capture Volume": Stereo gain control for TX1 path "TX2 Digital Capture Volume": Stereo gain control for TX2 path "Analog Capture Volume": Stereo gain control for the analog path only Important things for the board files: Microphone bias: "Mic Bias 1": Bias for Main mic or for digimic0 (analog or digital path) "Mic Bias 2": Bias for Sub mic or for digimic1 (analog or digital path) "Headset Mic Bias": Bias for Headset mic When the routing configured correctly only the needed components will be powered/enabled. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2008-12-31 01:08:38 -07:00
/* wait for offset cancellation to complete */
do {
/* this takes a little while, so don't slam i2c */
udelay(2000);
twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte,
TWL4030_REG_ANAMICL);
} while ((i++ < 100) &&
((byte & TWL4030_CNCL_OFFSET_START) ==
TWL4030_CNCL_OFFSET_START));
/* anti-pop when changing analog gain */
regmisc1 = twl4030_read_reg_cache(codec, TWL4030_REG_MISC_SET_1);
twl4030_write(codec, TWL4030_REG_MISC_SET_1,
regmisc1 | TWL4030_SMOOTH_ANAVOL_EN);
/* toggle CODECPDZ as per TRM */
twl4030_clear_codecpdz(codec);
twl4030_set_codecpdz(codec);
/* program anti-pop with bias ramp delay */
popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
popn &= TWL4030_RAMP_DELAY;
popn |= TWL4030_RAMP_DELAY_645MS;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
popn |= TWL4030_VMID_EN;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
/* enable anti-pop ramp */
popn |= TWL4030_RAMP_EN;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
}
static void twl4030_power_down(struct snd_soc_codec *codec)
{
u8 popn;
/* disable anti-pop ramp */
popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET);
popn &= ~TWL4030_RAMP_EN;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
/* disable bias out */
popn &= ~TWL4030_VMID_EN;
twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn);
/* power down */
twl4030_clear_codecpdz(codec);
}
static int twl4030_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
switch (level) {
case SND_SOC_BIAS_ON:
twl4030_power_up(codec);
break;
case SND_SOC_BIAS_PREPARE:
/* TODO: develop a twl4030_prepare function */
break;
case SND_SOC_BIAS_STANDBY:
/* TODO: develop a twl4030_standby function */
twl4030_power_down(codec);
break;
case SND_SOC_BIAS_OFF:
twl4030_power_down(codec);
break;
}
codec->bias_level = level;
return 0;
}
static int twl4030_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_device *socdev = rtd->socdev;
struct snd_soc_codec *codec = socdev->codec;
u8 mode, old_mode, format, old_format;
/* bit rate */
old_mode = twl4030_read_reg_cache(codec,
TWL4030_REG_CODEC_MODE) & ~TWL4030_CODECPDZ;
mode = old_mode & ~TWL4030_APLL_RATE;
switch (params_rate(params)) {
case 8000:
mode |= TWL4030_APLL_RATE_8000;
break;
case 11025:
mode |= TWL4030_APLL_RATE_11025;
break;
case 12000:
mode |= TWL4030_APLL_RATE_12000;
break;
case 16000:
mode |= TWL4030_APLL_RATE_16000;
break;
case 22050:
mode |= TWL4030_APLL_RATE_22050;
break;
case 24000:
mode |= TWL4030_APLL_RATE_24000;
break;
case 32000:
mode |= TWL4030_APLL_RATE_32000;
break;
case 44100:
mode |= TWL4030_APLL_RATE_44100;
break;
case 48000:
mode |= TWL4030_APLL_RATE_48000;
break;
default:
printk(KERN_ERR "TWL4030 hw params: unknown rate %d\n",
params_rate(params));
return -EINVAL;
}
if (mode != old_mode) {
/* change rate and set CODECPDZ */
twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode);
twl4030_set_codecpdz(codec);
}
/* sample size */
old_format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
format = old_format;
format &= ~TWL4030_DATA_WIDTH;
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
format |= TWL4030_DATA_WIDTH_16S_16W;
break;
case SNDRV_PCM_FORMAT_S24_LE:
format |= TWL4030_DATA_WIDTH_32S_24W;
break;
default:
printk(KERN_ERR "TWL4030 hw params: unknown format %d\n",
params_format(params));
return -EINVAL;
}
if (format != old_format) {
/* clear CODECPDZ before changing format (codec requirement) */
twl4030_clear_codecpdz(codec);
/* change format */
twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
/* set CODECPDZ afterwards */
twl4030_set_codecpdz(codec);
}
return 0;
}
static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai,
int clk_id, unsigned int freq, int dir)
{
struct snd_soc_codec *codec = codec_dai->codec;
u8 infreq;
switch (freq) {
case 19200000:
infreq = TWL4030_APLL_INFREQ_19200KHZ;
break;
case 26000000:
infreq = TWL4030_APLL_INFREQ_26000KHZ;
break;
case 38400000:
infreq = TWL4030_APLL_INFREQ_38400KHZ;
break;
default:
printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n",
freq);
return -EINVAL;
}
infreq |= TWL4030_APLL_EN;
twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq);
return 0;
}
static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai,
unsigned int fmt)
{
struct snd_soc_codec *codec = codec_dai->codec;
u8 old_format, format;
/* get format */
old_format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF);
format = old_format;
/* set master/slave audio interface */
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
format &= ~(TWL4030_AIF_SLAVE_EN);
format &= ~(TWL4030_CLK256FS_EN);
break;
case SND_SOC_DAIFMT_CBS_CFS:
format |= TWL4030_AIF_SLAVE_EN;
format |= TWL4030_CLK256FS_EN;
break;
default:
return -EINVAL;
}
/* interface format */
format &= ~TWL4030_AIF_FORMAT;
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
format |= TWL4030_AIF_FORMAT_CODEC;
break;
default:
return -EINVAL;
}
if (format != old_format) {
/* clear CODECPDZ before changing format (codec requirement) */
twl4030_clear_codecpdz(codec);
/* change format */
twl4030_write(codec, TWL4030_REG_AUDIO_IF, format);
/* set CODECPDZ afterwards */
twl4030_set_codecpdz(codec);
}
return 0;
}
#define TWL4030_RATES (SNDRV_PCM_RATE_8000_48000)
#define TWL4030_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE)
struct snd_soc_dai twl4030_dai = {
.name = "twl4030",
.playback = {
.stream_name = "Playback",
.channels_min = 2,
.channels_max = 2,
.rates = TWL4030_RATES,
.formats = TWL4030_FORMATS,},
.capture = {
.stream_name = "Capture",
.channels_min = 2,
.channels_max = 2,
.rates = TWL4030_RATES,
.formats = TWL4030_FORMATS,},
.ops = {
.hw_params = twl4030_hw_params,
.set_sysclk = twl4030_set_dai_sysclk,
.set_fmt = twl4030_set_dai_fmt,
}
};
EXPORT_SYMBOL_GPL(twl4030_dai);
static int twl4030_suspend(struct platform_device *pdev, pm_message_t state)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->codec;
twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF);
return 0;
}
static int twl4030_resume(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->codec;
twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
twl4030_set_bias_level(codec, codec->suspend_bias_level);
return 0;
}
/*
* initialize the driver
* register the mixer and dsp interfaces with the kernel
*/
static int twl4030_init(struct snd_soc_device *socdev)
{
struct snd_soc_codec *codec = socdev->codec;
int ret = 0;
printk(KERN_INFO "TWL4030 Audio Codec init \n");
codec->name = "twl4030";
codec->owner = THIS_MODULE;
codec->read = twl4030_read_reg_cache;
codec->write = twl4030_write;
codec->set_bias_level = twl4030_set_bias_level;
codec->dai = &twl4030_dai;
codec->num_dai = 1;
codec->reg_cache_size = sizeof(twl4030_reg);
codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg),
GFP_KERNEL);
if (codec->reg_cache == NULL)
return -ENOMEM;
/* register pcms */
ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1);
if (ret < 0) {
printk(KERN_ERR "twl4030: failed to create pcms\n");
goto pcm_err;
}
twl4030_init_chip(codec);
/* power on device */
twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
twl4030_add_controls(codec);
twl4030_add_widgets(codec);
ret = snd_soc_init_card(socdev);
if (ret < 0) {
printk(KERN_ERR "twl4030: failed to register card\n");
goto card_err;
}
return ret;
card_err:
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
pcm_err:
kfree(codec->reg_cache);
return ret;
}
static struct snd_soc_device *twl4030_socdev;
static int twl4030_probe(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec;
codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL);
if (codec == NULL)
return -ENOMEM;
socdev->codec = codec;
mutex_init(&codec->mutex);
INIT_LIST_HEAD(&codec->dapm_widgets);
INIT_LIST_HEAD(&codec->dapm_paths);
twl4030_socdev = socdev;
twl4030_init(socdev);
return 0;
}
static int twl4030_remove(struct platform_device *pdev)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->codec;
printk(KERN_INFO "TWL4030 Audio Codec remove\n");
snd_soc_free_pcms(socdev);
snd_soc_dapm_free(socdev);
kfree(codec);
return 0;
}
struct snd_soc_codec_device soc_codec_dev_twl4030 = {
.probe = twl4030_probe,
.remove = twl4030_remove,
.suspend = twl4030_suspend,
.resume = twl4030_resume,
};
EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030);
static int __init twl4030_modinit(void)
{
return snd_soc_register_dai(&twl4030_dai);
}
module_init(twl4030_modinit);
static void __exit twl4030_exit(void)
{
snd_soc_unregister_dai(&twl4030_dai);
}
module_exit(twl4030_exit);
MODULE_DESCRIPTION("ASoC TWL4030 codec driver");
MODULE_AUTHOR("Steve Sakoman");
MODULE_LICENSE("GPL");