Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/powerpc/sysdev/mpic.h

66 lines
1.8 KiB
C
Raw Normal View History

[POWERPC] MPIC MSI allocator To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:58:36 -06:00
#ifndef _POWERPC_SYSDEV_MPIC_H
#define _POWERPC_SYSDEV_MPIC_H
/*
* Copyright 2006-2007, Michael Ellerman, IBM Corporation.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; version 2 of the
* License.
*
*/
#ifdef CONFIG_PCI_MSI
extern void mpic_msi_reserve_hwirq(struct mpic *mpic, irq_hw_number_t hwirq);
extern int mpic_msi_init_allocator(struct mpic *mpic);
[POWERPC] MPIC U3/U4 MSI backend MPIC U3/U4 MSI backend. Based on code from Segher, heavily hacked by me. This only deals with MSI on U3/U4 MPICs, aka. CPC 9x5. If we find a U3/U4 then we enable this backend, ie. take over the ppc_md MSI hooks. We might need more elaborate logic in future to decide which backend is enabled. We need our own irq_chip so that we can do MSI masking/unmasking on the device itself. We also need to mask explicitly on shutdown to make sure we don't get bitten by lazy-disable semantics. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:58:37 -06:00
extern int mpic_u3msi_init(struct mpic *mpic);
[POWERPC] MPIC MSI allocator To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:58:36 -06:00
#else
static inline void mpic_msi_reserve_hwirq(struct mpic *mpic,
irq_hw_number_t hwirq)
{
return;
}
[POWERPC] MPIC U3/U4 MSI backend MPIC U3/U4 MSI backend. Based on code from Segher, heavily hacked by me. This only deals with MSI on U3/U4 MPICs, aka. CPC 9x5. If we find a U3/U4 then we enable this backend, ie. take over the ppc_md MSI hooks. We might need more elaborate logic in future to decide which backend is enabled. We need our own irq_chip so that we can do MSI masking/unmasking on the device itself. We also need to mask explicitly on shutdown to make sure we don't get bitten by lazy-disable semantics. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:58:37 -06:00
static inline int mpic_u3msi_init(struct mpic *mpic)
{
return -1;
}
powerpc/pasemi: Only the build the pasemi MSI code for PASEMI=y The pasemi MSI code is currently always built when MPIC=y && PCI_MSI=y. It should not have any effect on other platforms, because it immediately checks the MPIC's compatible property for "pasemi,pwrficient-openpic". However it's odd that it's still built even when PASEMI=n. It also needn't be in sysdev, as it's only used by pasemi. So move it into platforms/pasemi, whereby it will only be built for PASEMI=y. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-09 19:52:06 -06:00
#endif
[POWERPC] pasemi: Implement MSI support Implement MSI support for PA Semi PWRficient platforms. MSI is done through a special range of sources on the openpic controller, and they're unfortunately breaking the usual concepts of how sources are programmed: * The source is calculated as 512 + the value written into the MSI register * The vector for this source is added to the source and reported through IACK This means that for simplicity, it makes much more sense to just set the vector to 0 for the source, since that's really the vector we expect to see from IACK. Also, the affinity/priority registers will affect 16 sources at a time. To avoid most (simple) users from being limited by this, allocate 16 sources per device but use only one. This means that there's a total of 32 sources. If we get usage scenarions that need more sources, the allocator should probably be revised to take an alignment argument and size, not just do natural alignment. Finally, since I'm already touching the MPIC names on pasemi, rename the base one from the somewhat odd " PAS-OPIC " to "PASEMI-OPIC". Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 23:44:46 -07:00
powerpc/pasemi: Only the build the pasemi MSI code for PASEMI=y The pasemi MSI code is currently always built when MPIC=y && PCI_MSI=y. It should not have any effect on other platforms, because it immediately checks the MPIC's compatible property for "pasemi,pwrficient-openpic". However it's odd that it's still built even when PASEMI=n. It also needn't be in sysdev, as it's only used by pasemi. So move it into platforms/pasemi, whereby it will only be built for PASEMI=y. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-09 19:52:06 -06:00
#if defined(CONFIG_PCI_MSI) && defined(CONFIG_PPC_PASEMI)
int mpic_pasemi_msi_init(struct mpic *mpic);
#else
static inline int mpic_pasemi_msi_init(struct mpic *mpic) { return -1; }
[POWERPC] MPIC MSI allocator To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:58:36 -06:00
#endif
powerpc: mpic irq_data conversion. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-08 15:26:43 -07:00
extern int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type);
[POWERPC] pasemi: Implement MSI support Implement MSI support for PA Semi PWRficient platforms. MSI is done through a special range of sources on the openpic controller, and they're unfortunately breaking the usual concepts of how sources are programmed: * The source is calculated as 512 + the value written into the MSI register * The vector for this source is added to the source and reported through IACK This means that for simplicity, it makes much more sense to just set the vector to 0 for the source, since that's really the vector we expect to see from IACK. Also, the affinity/priority registers will affect 16 sources at a time. To avoid most (simple) users from being limited by this, allocate 16 sources per device but use only one. This means that there's a total of 32 sources. If we get usage scenarions that need more sources, the allocator should probably be revised to take an alignment argument and size, not just do natural alignment. Finally, since I'm already touching the MPIC names on pasemi, rename the base one from the somewhat odd " PAS-OPIC " to "PASEMI-OPIC". Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-11 23:44:46 -07:00
extern void mpic_set_vector(unsigned int virq, unsigned int vector);
powerpc: mpic irq_data conversion. Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-08 15:26:43 -07:00
extern int mpic_set_affinity(struct irq_data *d,
const struct cpumask *cpumask, bool force);
powerpc/mpic: Add ability to reset a core via MPIC We need the ability to reset cores for use with kexec/kdump for SMP systems. Calling this function with the specific core you want to reset will cause the CPU to spin in reset. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-29 03:42:26 -06:00
extern void mpic_reset_core(int cpu);
[POWERPC] MPIC U3/U4 MSI backend MPIC U3/U4 MSI backend. Based on code from Segher, heavily hacked by me. This only deals with MSI on U3/U4 MPICs, aka. CPC 9x5. If we find a U3/U4 then we enable this backend, ie. take over the ppc_md MSI hooks. We might need more elaborate logic in future to decide which backend is enabled. We need our own irq_chip so that we can do MSI masking/unmasking on the device itself. We also need to mask explicitly on shutdown to make sure we don't get bitten by lazy-disable semantics. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:58:37 -06:00
powerpc/mpic: FSL MPIC error interrupt support. All SOC device error interrupts are muxed and delivered to the core as a single MPIC error interrupt. Currently all the device drivers requiring access to device errors have to register for the MPIC error interrupt as a shared interrupt. With this patch we add interrupt demuxing capability in the mpic driver, allowing device drivers to register for their individual error interrupts. This is achieved by handling error interrupts in a cascaded fashion. MPIC error interrupt is handled by the "error_int_handler", which subsequently demuxes it using the EISR and delivers it to the respective drivers. The error interrupt capability is dependent on the MPIC EIMR register, which was introduced in FSL MPIC version 4.1 (P4080 rev2). So, error interrupt demuxing capability is dependent on the MPIC version and can be used for versions >= 4.1. Signed-off-by: Varun Sethi <Varun.Sethi@freescale.com> Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2012-08-07 22:06:09 -06:00
#ifdef CONFIG_FSL_SOC
extern int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t hw);
extern void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum);
extern int mpic_setup_error_int(struct mpic *mpic, int intvec);
#else
static inline int mpic_map_error_int(struct mpic *mpic, unsigned int virq, irq_hw_number_t hw)
{
return 0;
}
static inline void mpic_err_int_init(struct mpic *mpic, irq_hw_number_t irqnum)
{
return;
}
static inline int mpic_setup_error_int(struct mpic *mpic, int intvec)
{
return -1;
}
#endif
[POWERPC] MPIC MSI allocator To support MSI on MPIC we need a way to reserve and allocate hardware irq numbers, this patch implements an allocator for that purpose. New firmware platforms must define a "msi-available-ranges" property on their MPIC node for MSI to work. For U3/U4 we do a best-guess setup. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-05-07 20:58:36 -06:00
#endif /* _POWERPC_SYSDEV_MPIC_H */
Reference in a new issue Copy permalink