Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/net/pcmcia/fmvj18x_cs.c

1260 lines
36 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*======================================================================
fmvj18x_cs.c 2.8 2002/03/23
A fmvj18x (and its compatibles) PCMCIA client driver
Contributed by Shingo Fujimoto, shingo@flab.fujitsu.co.jp
TDK LAK-CD021 and CONTEC C-NET(PC)C support added by
Nobuhiro Katayama, kata-n@po.iijnet.or.jp
The PCMCIA client code is based on code written by David Hinds.
Network code is based on the "FMV-18x driver" by Yutaka TAMIYA
but is actually largely Donald Becker's AT1700 driver, which
carries the following attribution:
Written 1993-94 by Donald Becker.
Copyright 1993 United States Government as represented by the
Director, National Security Agency.
This software may be used and distributed according to the terms
of the GNU General Public License, incorporated herein by reference.
The author may be reached as becker@scyld.com, or C/O
Scyld Computing Corporation
410 Severn Ave., Suite 210
Annapolis MD 21403
======================================================================*/
#define DRV_NAME "fmvj18x_cs"
[PATCH] Remove more unnecessary driver printk's As I promised last week, here is the first pass at removing all unnecessary printk's that exist in network device drivers currently in promiscuous mode. The duplicate messages are not needed so they have been removed. Some of these drivers are quite old and might not need an update, but I did them all anyway. I am currently auditing the remaining conditional printk's and will send out a patch for those soon. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-11 15:39:18 -06:00
#define DRV_VERSION "2.9"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/delay.h>
#include <linux/ethtool.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/crc32.h>
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ciscode.h>
#include <pcmcia/ds.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
/*====================================================================*/
/* Module parameters */
MODULE_DESCRIPTION("fmvj18x and compatible PCMCIA ethernet driver");
MODULE_LICENSE("GPL");
#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
/* SRAM configuration */
/* 0:4KB*2 TX buffer else:8KB*2 TX buffer */
INT_MODULE_PARM(sram_config, 0);
#ifdef PCMCIA_DEBUG
INT_MODULE_PARM(pc_debug, PCMCIA_DEBUG);
#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
static char *version = DRV_NAME ".c " DRV_VERSION " 2002/03/23";
#else
#define DEBUG(n, args...)
#endif
/*====================================================================*/
/*
PCMCIA event handlers
*/
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:26:06 -07:00
static int fmvj18x_config(struct pcmcia_device *link);
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id);
static int fmvj18x_setup_mfc(struct pcmcia_device *link);
static void fmvj18x_release(struct pcmcia_device *link);
[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:23:14 -07:00
static void fmvj18x_detach(struct pcmcia_device *p_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
LAN controller(MBH86960A) specific routines
*/
static int fjn_config(struct net_device *dev, struct ifmap *map);
static int fjn_open(struct net_device *dev);
static int fjn_close(struct net_device *dev);
static int fjn_start_xmit(struct sk_buff *skb, struct net_device *dev);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 07:55:46 -06:00
static irqreturn_t fjn_interrupt(int irq, void *dev_id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
static void fjn_rx(struct net_device *dev);
static void fjn_reset(struct net_device *dev);
static struct net_device_stats *fjn_get_stats(struct net_device *dev);
static void set_rx_mode(struct net_device *dev);
static void fjn_tx_timeout(struct net_device *dev);
drivers/net: const-ify ethtool_ops declarations Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 12:30:00 -06:00
static const struct ethtool_ops netdev_ethtool_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
card type
*/
typedef enum { MBH10302, MBH10304, TDK, CONTEC, LA501, UNGERMANN,
PCMCIA-NETDEV : add new ID of lan&modem multifunction card fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-26 17:57:58 -06:00
XXX10304, NEC, KME
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} cardtype_t;
/*
driver specific data structure
*/
typedef struct local_info_t {
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 02:45:09 -07:00
struct pcmcia_device *p_dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
dev_node_t node;
struct net_device_stats stats;
long open_time;
uint tx_started:1;
uint tx_queue;
u_short tx_queue_len;
cardtype_t cardtype;
u_short sent;
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
u_char __iomem *base;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} local_info_t;
[netdrvr fmvj18x_cs] fix multicast bug * use set_rx_mode to (re)initialize the multicast table. * MC_FILTERBREAK is 64 (= 8 * 8bit) * remove local_info_t.mc_filter
2005-12-01 00:37:17 -07:00
#define MC_FILTERBREAK 64
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*====================================================================*/
/*
ioport offset from the base address
*/
#define TX_STATUS 0 /* transmit status register */
#define RX_STATUS 1 /* receive status register */
#define TX_INTR 2 /* transmit interrupt mask register */
#define RX_INTR 3 /* receive interrupt mask register */
#define TX_MODE 4 /* transmit mode register */
#define RX_MODE 5 /* receive mode register */
#define CONFIG_0 6 /* configuration register 0 */
#define CONFIG_1 7 /* configuration register 1 */
#define NODE_ID 8 /* node ID register (bank 0) */
#define MAR_ADR 8 /* multicast address registers (bank 1) */
#define DATAPORT 8 /* buffer mem port registers (bank 2) */
#define TX_START 10 /* transmit start register */
#define COL_CTRL 11 /* 16 collision control register */
#define BMPR12 12 /* reserved */
#define BMPR13 13 /* reserved */
#define RX_SKIP 14 /* skip received packet register */
#define LAN_CTRL 16 /* LAN card control register */
#define MAC_ID 0x1a /* hardware address */
#define UNGERMANN_MAC_ID 0x18 /* UNGERMANN-BASS hardware address */
/*
control bits
*/
#define ENA_TMT_OK 0x80
#define ENA_TMT_REC 0x20
#define ENA_COL 0x04
#define ENA_16_COL 0x02
#define ENA_TBUS_ERR 0x01
#define ENA_PKT_RDY 0x80
#define ENA_BUS_ERR 0x40
#define ENA_LEN_ERR 0x08
#define ENA_ALG_ERR 0x04
#define ENA_CRC_ERR 0x02
#define ENA_OVR_FLO 0x01
/* flags */
#define F_TMT_RDY 0x80 /* can accept new packet */
#define F_NET_BSY 0x40 /* carrier is detected */
#define F_TMT_OK 0x20 /* send packet successfully */
#define F_SRT_PKT 0x10 /* short packet error */
#define F_COL_ERR 0x04 /* collision error */
#define F_16_COL 0x02 /* 16 collision error */
#define F_TBUS_ERR 0x01 /* bus read error */
#define F_PKT_RDY 0x80 /* packet(s) in buffer */
#define F_BUS_ERR 0x40 /* bus read error */
#define F_LEN_ERR 0x08 /* short packet */
#define F_ALG_ERR 0x04 /* frame error */
#define F_CRC_ERR 0x02 /* CRC error */
#define F_OVR_FLO 0x01 /* overflow error */
#define F_BUF_EMP 0x40 /* receive buffer is empty */
#define F_SKP_PKT 0x05 /* drop packet in buffer */
/* default bitmaps */
#define D_TX_INTR ( ENA_TMT_OK )
#define D_RX_INTR ( ENA_PKT_RDY | ENA_LEN_ERR \
| ENA_ALG_ERR | ENA_CRC_ERR | ENA_OVR_FLO )
#define TX_STAT_M ( F_TMT_RDY )
#define RX_STAT_M ( F_PKT_RDY | F_LEN_ERR \
| F_ALG_ERR | F_CRC_ERR | F_OVR_FLO )
/* commands */
#define D_TX_MODE 0x06 /* no tests, detect carrier */
#define ID_MATCHED 0x02 /* (RX_MODE) */
#define RECV_ALL 0x03 /* (RX_MODE) */
#define CONFIG0_DFL 0x5a /* 16bit bus, 4K x 2 Tx queues */
#define CONFIG0_DFL_1 0x5e /* 16bit bus, 8K x 2 Tx queues */
#define CONFIG0_RST 0xda /* Data Link Controller off (CONFIG_0) */
#define CONFIG0_RST_1 0xde /* Data Link Controller off (CONFIG_0) */
#define BANK_0 0xa0 /* bank 0 (CONFIG_1) */
#define BANK_1 0xa4 /* bank 1 (CONFIG_1) */
#define BANK_2 0xa8 /* bank 2 (CONFIG_1) */
#define CHIP_OFF 0x80 /* contrl chip power off (CONFIG_1) */
#define DO_TX 0x80 /* do transmit packet */
#define SEND_PKT 0x81 /* send a packet */
#define AUTO_MODE 0x07 /* Auto skip packet on 16 col detected */
#define MANU_MODE 0x03 /* Stop and skip packet on 16 col */
#define TDK_AUTO_MODE 0x47 /* Auto skip packet on 16 col detected */
#define TDK_MANU_MODE 0x43 /* Stop and skip packet on 16 col */
#define INTR_OFF 0x0d /* LAN controller ignores interrupts */
#define INTR_ON 0x1d /* LAN controller will catch interrupts */
#define TX_TIMEOUT ((400*HZ)/1000)
#define BANK_0U 0x20 /* bank 0 (CONFIG_1) */
#define BANK_1U 0x24 /* bank 1 (CONFIG_1) */
#define BANK_2U 0x28 /* bank 2 (CONFIG_1) */
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:26:06 -07:00
static int fmvj18x_probe(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
local_info_t *lp;
struct net_device *dev;
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:25:51 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DEBUG(0, "fmvj18x_attach()\n");
/* Make up a FMVJ18x specific data structure */
dev = alloc_etherdev(sizeof(local_info_t));
if (!dev)
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:25:51 -07:00
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
lp = netdev_priv(dev);
link->priv = dev;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
lp->p_dev = link;
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
lp->base = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* The io structure describes IO port mapping */
link->io.NumPorts1 = 32;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
link->io.IOAddrLines = 5;
/* Interrupt setup */
netdrvr/pcmcia: use IRQ_TYPE_DYNAMIC_SHARING flag for irq.Attributes. The drivers below support IRQ-sharing. 3c574_cs, 3c589_cs, pcnet_cs, axnet_cs, smc91c92_cs, fmvj18x_cs. xirc2ps_cs, serial_cs. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-27 20:26:17 -06:00
link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING|IRQ_HANDLE_PRESENT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = &fjn_interrupt;
link->irq.Instance = dev;
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:25:51 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* General socket configuration */
link->conf.Attributes = CONF_ENABLE_IRQ;
link->conf.IntType = INT_MEMORY_AND_IO;
/* The FMVJ18x specific entries in the device structure. */
dev->hard_start_xmit = &fjn_start_xmit;
dev->set_config = &fjn_config;
dev->get_stats = &fjn_get_stats;
dev->set_multicast_list = &set_rx_mode;
dev->open = &fjn_open;
dev->stop = &fjn_close;
#ifdef HAVE_TX_TIMEOUT
dev->tx_timeout = fjn_tx_timeout;
dev->watchdog_timeo = TX_TIMEOUT;
#endif
SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:26:06 -07:00
return fmvj18x_config(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} /* fmvj18x_attach */
/*====================================================================*/
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static void fmvj18x_detach(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct net_device *dev = link->priv;
[PATCH] pcmcia: remove dev_list from drivers The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:25:35 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DEBUG(0, "fmvj18x_detach(0x%p)\n", link);
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 02:45:09 -07:00
if (link->dev_node)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
unregister_netdev(dev);
[PATCH] pcmcia: use bitfield instead of p_state and state Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-01 16:09:29 -07:00
fmvj18x_release(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
free_netdev(dev);
} /* fmvj18x_detach */
/*====================================================================*/
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static int mfc_try_io_port(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
int i, ret;
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
static const unsigned int serial_base[5] =
{ 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
for (i = 0; i < 5; i++) {
link->io.BasePort2 = serial_base[i];
link->io.Attributes2 = IO_DATA_PATH_WIDTH_8;
if (link->io.BasePort2 == 0) {
link->io.NumPorts2 = 0;
printk(KERN_NOTICE "fmvj18x_cs: out of resource for serial\n");
}
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
ret = pcmcia_request_io(link, &link->io);
pcmcia: deprecate CS_SUCCESS Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-03 02:07:45 -06:00
if (ret == 0)
return ret;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
return ret;
}
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static int ungermann_try_io_port(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
int ret;
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
Ungermann-Bass Access/CARD accepts 0x300,0x320,0x340,0x360
0x380,0x3c0 only for ioport.
*/
for (ioaddr = 0x300; ioaddr < 0x3e0; ioaddr += 0x20) {
link->io.BasePort1 = ioaddr;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
ret = pcmcia_request_io(link, &link->io);
pcmcia: deprecate CS_SUCCESS Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-03 02:07:45 -06:00
if (ret == 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* calculate ConfigIndex value */
link->conf.ConfigIndex =
((link->io.BasePort1 & 0x0f0) >> 3) | 0x22;
return ret;
}
}
return ret; /* RequestIO failed */
}
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:26:06 -07:00
static int fmvj18x_config(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct net_device *dev = link->priv;
local_info_t *lp = netdev_priv(dev);
tuple_t tuple;
cisparse_t parse;
u_short buf[32];
[PATCH] pcmcia: conf.ConfigBase and conf.Present consolidation struct pcmcia_device *p_dev->conf.ConfigBase and .Present are set in almost all PCMICA driver right at the beginning, using the same calls but slightly different implementations. Unfiy this in the PCMCIA core. Includes a small bugfix ("drivers/net/pcmcia/xirc2ps_cs.c: remove unused label") from and Signed-off-by Adrian Bunk <bunk@stusta.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-25 19:49:27 -06:00
int i, last_fn = 0, last_ret = 0, ret;
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
cardtype_t cardtype;
char *card_name = "unknown";
u_char *node_id;
DEBUG(0, "fmvj18x_config(0x%p)\n", link);
tuple.TupleData = (u_char *)buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_FUNCE;
tuple.TupleOffset = 0;
pcmcia: deprecate CS_SUCCESS Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-03 02:07:45 -06:00
if (pcmcia_get_first_tuple(link, &tuple) == 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
pcmcia: remove unused argument to pcmcia_parse_tuple() Since we're just parsing the tuple being passed to this function, we don't need any device-specific information. Also, remove the call to pcmcia_validate_cis() from pcmciamtd.c, since it is already called by the PCMCIA core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-31 07:50:33 -06:00
CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
link->conf.ConfigIndex = parse.cftable_entry.index;
[PATCH] pcmcia: remove manf_id and card_id indirection As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-25 19:28:53 -06:00
switch (link->manf_id) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
case MANFID_TDK:
cardtype = TDK;
[PATCH] pcmcia: remove manf_id and card_id indirection As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-25 19:28:53 -06:00
if (link->card_id == PRODID_TDK_GN3410
|| link->card_id == PRODID_TDK_NP9610
|| link->card_id == PRODID_TDK_MN3200) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
link->io.NumPorts2 = 8;
}
break;
PCMCIA-NETDEV : add new ID of lan&modem multifunction card fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-26 17:57:58 -06:00
case MANFID_NEC:
cardtype = NEC; /* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
link->io.NumPorts2 = 8;
break;
case MANFID_KME:
cardtype = KME; /* MultiFunction Card */
link->conf.ConfigBase = 0x800;
link->conf.ConfigIndex = 0x47;
link->io.NumPorts2 = 8;
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
case MANFID_CONTEC:
cardtype = CONTEC;
break;
case MANFID_FUJITSU:
fmvj18x_cs: add NextCom NC5310 rev B support fmvj18x_cs: The manfid of "NextCom NC5310 rev B" is MANF_ID_FUJITSU. but this card is MBH10302 based card. use ConfigBase to detect the cardtype for this card. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-04 19:51:12 -06:00
if (link->conf.ConfigBase == 0x0fe0)
cardtype = MBH10302;
else if (link->card_id == PRODID_FUJITSU_MBH10302)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
but these are MBH10304 based card. */
cardtype = MBH10304;
[PATCH] pcmcia: remove manf_id and card_id indirection As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-25 19:28:53 -06:00
else if (link->card_id == PRODID_FUJITSU_MBH10304)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
cardtype = MBH10304;
else
cardtype = LA501;
break;
default:
cardtype = MBH10304;
}
} else {
/* old type card */
[PATCH] pcmcia: remove manf_id and card_id indirection As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-25 19:28:53 -06:00
switch (link->manf_id) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
case MANFID_FUJITSU:
[PATCH] pcmcia: remove manf_id and card_id indirection As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-25 19:28:53 -06:00
if (link->card_id == PRODID_FUJITSU_MBH10304) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
cardtype = XXX10304; /* MBH10304 with buggy CIS */
link->conf.ConfigIndex = 0x20;
} else {
cardtype = MBH10302; /* NextCom NC5310, etc. */
link->conf.ConfigIndex = 1;
}
break;
case MANFID_UNGERMANN:
cardtype = UNGERMANN;
break;
default:
cardtype = MBH10302;
link->conf.ConfigIndex = 1;
}
}
if (link->io.NumPorts2 != 0) {
link->irq.Attributes =
IRQ_TYPE_DYNAMIC_SHARING|IRQ_FIRST_SHARED|IRQ_HANDLE_PRESENT;
ret = mfc_try_io_port(link);
pcmcia: deprecate CS_SUCCESS Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-03 02:07:45 -06:00
if (ret != 0) goto cs_failed;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} else if (cardtype == UNGERMANN) {
ret = ungermann_try_io_port(link);
pcmcia: deprecate CS_SUCCESS Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-03 02:07:45 -06:00
if (ret != 0) goto cs_failed;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} else {
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
dev->irq = link->irq.AssignedIRQ;
dev->base_addr = link->io.BasePort1;
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
if (link->io.BasePort2 != 0) {
ret = fmvj18x_setup_mfc(link);
if (ret != 0) goto failed;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ioaddr = dev->base_addr;
/* Reset controller */
if (sram_config == 0)
outb(CONFIG0_RST, ioaddr + CONFIG_0);
else
outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
/* Power On chip and select bank 0 */
if (cardtype == MBH10302)
outb(BANK_0, ioaddr + CONFIG_1);
else
outb(BANK_0U, ioaddr + CONFIG_1);
/* Set hardware address */
switch (cardtype) {
case MBH10304:
case TDK:
case LA501:
case CONTEC:
PCMCIA-NETDEV : add new ID of lan&modem multifunction card fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-26 17:57:58 -06:00
case NEC:
case KME:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
tuple.DesiredTuple = CISTPL_FUNCE;
tuple.TupleOffset = 0;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
tuple.TupleOffset = 0;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (cardtype == MBH10304) {
/* MBH10304's CIS_FUNCE is corrupted */
node_id = &(tuple.TupleData[5]);
card_name = "FMV-J182";
} else {
while (tuple.TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID ) {
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
node_id = &(tuple.TupleData[2]);
if( cardtype == TDK ) {
card_name = "TDK LAK-CD021";
} else if( cardtype == LA501 ) {
card_name = "LA501";
PCMCIA-NETDEV : add new ID of lan&modem multifunction card fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-26 17:57:58 -06:00
} else if( cardtype == NEC ) {
card_name = "PK-UG-J001";
} else if( cardtype == KME ) {
card_name = "Panasonic";
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} else {
card_name = "C-NET(PC)C";
}
}
/* Read MACID from CIS */
for (i = 0; i < 6; i++)
dev->dev_addr[i] = node_id[i];
break;
case UNGERMANN:
/* Read MACID from register */
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(ioaddr + UNGERMANN_MAC_ID + i);
card_name = "Access/CARD";
break;
case XXX10304:
/* Read MACID from Buggy CIS */
if (fmvj18x_get_hwinfo(link, tuple.TupleData) == -1) {
printk(KERN_NOTICE "fmvj18x_cs: unable to read hardware net address.\n");
goto failed;
}
for (i = 0 ; i < 6; i++) {
dev->dev_addr[i] = tuple.TupleData[i];
}
card_name = "FMV-J182";
break;
case MBH10302:
default:
/* Read MACID from register */
for (i = 0; i < 6; i++)
dev->dev_addr[i] = inb(ioaddr + MAC_ID + i);
card_name = "FMV-J181";
break;
}
lp->cardtype = cardtype;
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 02:45:09 -07:00
link->dev_node = &lp->node;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
SET_NETDEV_DEV(dev, &handle_to_dev(link));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (register_netdev(dev) != 0) {
printk(KERN_NOTICE "fmvj18x_cs: register_netdev() failed\n");
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 02:45:09 -07:00
link->dev_node = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
goto failed;
}
strcpy(lp->node.dev_name, dev->name);
/* print current configuration */
[NET]: Introduce and use print_mac() and DECLARE_MAC_BUF() This is nicer than the MAC_FMT stuff. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-03 18:59:30 -06:00
printk(KERN_INFO "%s: %s, sram %s, port %#3lx, irq %d, "
net: convert print_mac to %pM This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27 16:59:26 -06:00
"hw_addr %pM\n",
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
dev->name, card_name, sram_config == 0 ? "4K TX*2" : "8K TX*2",
net: convert print_mac to %pM This converts pretty much everything to print_mac. There were a few things that had conflicts which I have just dropped for now, no harm done. I've built an allyesconfig with this and looked at the files that weren't built very carefully, but it's a huge patch. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-27 16:59:26 -06:00
dev->base_addr, dev->irq, dev->dev_addr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:26:06 -07:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
cs_failed:
/* All Card Services errors end up here */
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
cs_error(link, last_fn, last_ret);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
failed:
fmvj18x_release(link);
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:26:06 -07:00
return -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} /* fmvj18x_config */
/*====================================================================*/
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static int fmvj18x_get_hwinfo(struct pcmcia_device *link, u_char *node_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
win_req_t req;
memreq_t mem;
u_char __iomem *base;
int i, j;
/* Allocate a small memory window */
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
i = pcmcia_request_window(&link, &req, &link->win);
pcmcia: deprecate CS_SUCCESS Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-03 02:07:45 -06:00
if (i != 0) {
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
cs_error(link, RequestWindow, i);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return -1;
}
base = ioremap(req.Base, req.Size);
mem.Page = 0;
mem.CardOffset = 0;
pcmcia_map_mem_page(link->win, &mem);
/*
* MBH10304 CISTPL_FUNCE_LAN_NODE_ID format
* 22 0d xx xx xx 04 06 yy yy yy yy yy yy ff
* 'xx' is garbage.
* 'yy' is MAC address.
*/
for (i = 0; i < 0x200; i++) {
if (readb(base+i*2) == 0x22) {
if (readb(base+(i-1)*2) == 0xff
&& readb(base+(i+5)*2) == 0x04
&& readb(base+(i+6)*2) == 0x06
&& readb(base+(i+13)*2) == 0xff)
break;
}
}
if (i != 0x200) {
for (j = 0 ; j < 6; j++,i++) {
node_id[j] = readb(base+(i+7)*2);
}
}
iounmap(base);
j = pcmcia_release_window(link->win);
pcmcia: deprecate CS_SUCCESS Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-03 02:07:45 -06:00
if (j != 0)
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
cs_error(link, ReleaseWindow, j);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return (i != 0x200) ? 0 : -1;
} /* fmvj18x_get_hwinfo */
/*====================================================================*/
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static int fmvj18x_setup_mfc(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
win_req_t req;
memreq_t mem;
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
int i;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
struct net_device *dev = link->priv;
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr;
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
local_info_t *lp = netdev_priv(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Allocate a small memory window */
req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
req.Base = 0; req.Size = 0;
req.AccessSpeed = 0;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
i = pcmcia_request_window(&link, &req, &link->win);
pcmcia: deprecate CS_SUCCESS Instead of using own error or success codes, the PCMCIA code should rely on the generic return values. Therefore, replace all occurrences of CS_SUCCESS with 0. CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-03 02:07:45 -06:00
if (i != 0) {
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
cs_error(link, RequestWindow, i);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return -1;
}
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
lp->base = ioremap(req.Base, req.Size);
if (lp->base == NULL) {
printk(KERN_NOTICE "fmvj18x_cs: ioremap failed\n");
return -1;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
mem.Page = 0;
mem.CardOffset = 0;
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
i = pcmcia_map_mem_page(link->win, &mem);
if (i != 0) {
iounmap(lp->base);
lp->base = NULL;
cs_error(link, MapMemPage, i);
return -1;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ioaddr = dev->base_addr;
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
writeb(0x47, lp->base+0x800); /* Config Option Register of LAN */
writeb(0x0, lp->base+0x802); /* Config and Status Register */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
writeb(ioaddr & 0xff, lp->base+0x80a); /* I/O Base(Low) of LAN */
writeb((ioaddr >> 8) & 0xff, lp->base+0x80c); /* I/O Base(High) of LAN */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
writeb(0x45, lp->base+0x820); /* Config Option Register of Modem */
writeb(0x8, lp->base+0x822); /* Config and Status Register */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return 0;
}
/*====================================================================*/
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static void fmvj18x_release(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
struct net_device *dev = link->priv;
local_info_t *lp = netdev_priv(dev);
u_char __iomem *tmp;
int j;
DEBUG(0, "fmvj18x_release(0x%p)\n", link);
if (lp->base != NULL) {
tmp = lp->base;
lp->base = NULL; /* set NULL before iounmap */
iounmap(tmp);
j = pcmcia_release_window(link->win);
if (j != 0)
cs_error(link, ReleaseWindow, j);
}
pcmcia_disable_device(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static int fmvj18x_suspend(struct pcmcia_device *link)
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:21:18 -07:00
{
struct net_device *dev = link->priv;
[PATCH] pcmcia: use bitfield instead of p_state and state Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-01 16:09:29 -07:00
if (link->open)
[PATCH] pcmcia: default suspend and resume handling In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-01 16:02:33 -07:00
netif_device_detach(dev);
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:21:18 -07:00
return 0;
}
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
static int fmvj18x_resume(struct pcmcia_device *link)
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:21:18 -07:00
{
struct net_device *dev = link->priv;
[PATCH] pcmcia: use bitfield instead of p_state and state Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-01 16:09:29 -07:00
if (link->open) {
[PATCH] pcmcia: default suspend and resume handling In all but one case, the suspend and resume functions of PCMCIA drivers contain mostly of calls to pcmcia_release_configuration() and pcmcia_request_configuration(). Therefore, move this code out of the drivers and into the core. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-01 16:02:33 -07:00
fjn_reset(dev);
netif_device_attach(dev);
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:21:18 -07:00
}
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*====================================================================*/
[PATCH] pcmcia: id_table for fmvj18x_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 17:28:22 -06:00
static struct pcmcia_device_id fmvj18x_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x0004, 0x0004),
PCMCIA_DEVICE_PROD_ID12("EAGLE Technology", "NE200 ETHERNET LAN MBH10302 04", 0x528c88c4, 0x74f91e59),
PCMCIA_DEVICE_PROD_ID12("Eiger Labs,Inc", "EPX-10BT PC Card Ethernet 10BT", 0x53af556e, 0x877f9922),
PCMCIA_DEVICE_PROD_ID12("Eiger labs,Inc.", "EPX-10BT PC Card Ethernet 10BT", 0xf47e6c66, 0x877f9922),
PCMCIA_DEVICE_PROD_ID12("FUJITSU", "LAN Card(FMV-J182)", 0x6ee5a3d8, 0x5baf31db),
PCMCIA_DEVICE_PROD_ID12("FUJITSU", "MBH10308", 0x6ee5a3d8, 0x3f04875e),
PCMCIA_DEVICE_PROD_ID12("FUJITSU TOWA", "LA501", 0xb8451188, 0x12939ba2),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "HT-4840-11", 0xf4f43949, 0x773910f4),
PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310B Ver1.0 ", 0x8cef4d3a, 0x075fc7b6),
PCMCIA_DEVICE_PROD_ID12("NextComK.K.", "NC5310 Ver1.0 ", 0x8cef4d3a, 0xbccf43e6),
PCMCIA_DEVICE_PROD_ID12("RATOC System Inc.", "10BASE_T CARD R280", 0x85c10e17, 0xd9413666),
PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CD02x", 0x1eae9475, 0x8fa0ee70),
PCMCIA_DEVICE_PROD_ID12("TDK", "LAC-CF010", 0x1eae9475, 0x7683bc9a),
PCMCIA_DEVICE_PROD_ID1("CONTEC Co.,Ltd.", 0x58d8fee2),
PCMCIA_DEVICE_PROD_ID1("PCMCIA LAN MBH10304 ES", 0x2599f454),
PCMCIA_DEVICE_PROD_ID1("PCMCIA MBH10302", 0x8f4005da),
PCMCIA_DEVICE_PROD_ID1("UBKK,V2.0", 0x90888080),
PCMCIA_PFC_DEVICE_PROD_ID12(0, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
PCMCIA-NETDEV : add new ID of lan&modem multifunction card fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-26 17:57:58 -06:00
PCMCIA_PFC_DEVICE_PROD_ID12(0, "NEC", "PK-UG-J001" ,0x18df0ba0 ,0x831b1064),
[PATCH] pcmcia: more IDs for TDK multifunction cards Add new pcmcia id_table for fmvj18x_cs and serial_cs. (TDK multi-function card (NetPartner9610 and MobileNetworker3200)) Signed-off-by: Jun Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 17:28:44 -06:00
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0d0a),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0105, 0x0e0a),
PCMCIA-NETDEV : add new ID of lan&modem multifunction card fmvj18x_cs: NEC PK-UG-J001 Panasonic CF-VML201 Panasonic TO-PDL9610 pcnet_cs: MICRO-RESEARCH MC336LAN Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-26 17:57:58 -06:00
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x0a05),
PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0032, 0x1101),
[PATCH] pcmcia: id_table for fmvj18x_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 17:28:22 -06:00
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, fmvj18x_ids);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
static struct pcmcia_driver fmvj18x_cs_driver = {
.owner = THIS_MODULE,
.drv = {
.name = "fmvj18x_cs",
},
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:26:06 -07:00
.probe = fmvj18x_probe,
[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:23:14 -07:00
.remove = fmvj18x_detach,
[PATCH] pcmcia: id_table for fmvj18x_cs Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-27 17:28:22 -06:00
.id_table = fmvj18x_ids,
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-14 13:21:18 -07:00
.suspend = fmvj18x_suspend,
.resume = fmvj18x_resume,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
};
static int __init init_fmvj18x_cs(void)
{
return pcmcia_register_driver(&fmvj18x_cs_driver);
}
static void __exit exit_fmvj18x_cs(void)
{
pcmcia_unregister_driver(&fmvj18x_cs_driver);
}
module_init(init_fmvj18x_cs);
module_exit(exit_fmvj18x_cs);
/*====================================================================*/
[netdrvr] irq handler minor cleanups in several drivers * use irq_handler_t where appropriate * no need to use 'irq' function arg, its already stored in a data struct * rename irq handler 'irq' argument to 'dummy', where the function has been analyzed and proven not to use its first argument. * remove always-false "dev_id == NULL" test from irq handlers * remove pointless casts from void* * declance: irq argument is not const * add KERN_xxx printk prefix * fix minor whitespace weirdness Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-29 03:46:16 -06:00
static irqreturn_t fjn_interrupt(int dummy, void *dev_id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct net_device *dev = dev_id;
local_info_t *lp = netdev_priv(dev);
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
unsigned short tx_stat, rx_stat;
ioaddr = dev->base_addr;
/* avoid multiple interrupts */
outw(0x0000, ioaddr + TX_INTR);
/* wait for a while */
udelay(1);
/* get status */
tx_stat = inb(ioaddr + TX_STATUS);
rx_stat = inb(ioaddr + RX_STATUS);
/* clear status */
outb(tx_stat, ioaddr + TX_STATUS);
outb(rx_stat, ioaddr + RX_STATUS);
DEBUG(4, "%s: interrupt, rx_status %02x.\n", dev->name, rx_stat);
DEBUG(4, " tx_status %02x.\n", tx_stat);
if (rx_stat || (inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
/* there is packet(s) in rx buffer */
fjn_rx(dev);
}
if (tx_stat & F_TMT_RDY) {
lp->stats.tx_packets += lp->sent ;
lp->sent = 0 ;
if (lp->tx_queue) {
outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
lp->sent = lp->tx_queue ;
lp->tx_queue = 0;
lp->tx_queue_len = 0;
dev->trans_start = jiffies;
} else {
lp->tx_started = 0;
}
netif_wake_queue(dev);
}
DEBUG(4, "%s: exiting interrupt,\n", dev->name);
DEBUG(4, " tx_status %02x, rx_status %02x.\n", tx_stat, rx_stat);
outb(D_TX_INTR, ioaddr + TX_INTR);
outb(D_RX_INTR, ioaddr + RX_INTR);
fmvj18x_cs: write interrupt ack bit for lan and modem to work simultaneously. Write interrupt ack bit in fjn_interrupt for lan and modem to work simultaneously. Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-02 18:56:04 -07:00
if (lp->base != NULL) {
/* Ack interrupt for multifunction card */
writeb(0x01, lp->base+0x802);
writeb(0x09, lp->base+0x822);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return IRQ_HANDLED;
} /* fjn_interrupt */
/*====================================================================*/
static void fjn_tx_timeout(struct net_device *dev)
{
struct local_info_t *lp = netdev_priv(dev);
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr = dev->base_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
printk(KERN_NOTICE "%s: transmit timed out with status %04x, %s?\n",
dev->name, htons(inw(ioaddr + TX_STATUS)),
inb(ioaddr + TX_STATUS) & F_TMT_RDY
? "IRQ conflict" : "network cable problem");
printk(KERN_NOTICE "%s: timeout registers: %04x %04x %04x "
"%04x %04x %04x %04x %04x.\n",
dev->name, htons(inw(ioaddr + 0)),
htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)),
htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)),
htons(inw(ioaddr +10)), htons(inw(ioaddr +12)),
htons(inw(ioaddr +14)));
lp->stats.tx_errors++;
/* ToDo: We should try to restart the adaptor... */
local_irq_disable();
fjn_reset(dev);
lp->tx_started = 0;
lp->tx_queue = 0;
lp->tx_queue_len = 0;
lp->sent = 0;
lp->open_time = jiffies;
local_irq_enable();
netif_wake_queue(dev);
}
static int fjn_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct local_info_t *lp = netdev_priv(dev);
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr = dev->base_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
short length = skb->len;
if (length < ETH_ZLEN)
{
[NET]: Avoid allocating skb in skb_pad First of all it is unnecessary to allocate a new skb in skb_pad since the existing one is not shared. More importantly, our hard_start_xmit interface does not allow a new skb to be allocated since that breaks requeueing. This patch uses pskb_expand_head to expand the existing skb and linearize it if needed. Actually, someone should sift through every instance of skb_pad on a non-linear skb as they do not fit the reasons why this was originally created. Incidentally, this fixes a minor bug when the skb is cloned (tcpdump, TCP, etc.). As it is skb_pad will simply write over a cloned skb. Because of the position of the write it is unlikely to cause problems but still it's best if we don't do it. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 03:06:41 -06:00
if (skb_padto(skb, ETH_ZLEN))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return 0;
length = ETH_ZLEN;
}
netif_stop_queue(dev);
{
unsigned char *buf = skb->data;
if (length > ETH_FRAME_LEN) {
printk(KERN_NOTICE "%s: Attempting to send a large packet"
" (%d bytes).\n", dev->name, length);
return 1;
}
DEBUG(4, "%s: Transmitting a packet of length %lu.\n",
dev->name, (unsigned long)skb->len);
lp->stats.tx_bytes += skb->len;
/* Disable both interrupts. */
outw(0x0000, ioaddr + TX_INTR);
/* wait for a while */
udelay(1);
outw(length, ioaddr + DATAPORT);
outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1);
lp->tx_queue++;
lp->tx_queue_len += ((length+3) & ~1);
if (lp->tx_started == 0) {
/* If the Tx is idle, always trigger a transmit. */
outb(DO_TX | lp->tx_queue, ioaddr + TX_START);
lp->sent = lp->tx_queue ;
lp->tx_queue = 0;
lp->tx_queue_len = 0;
dev->trans_start = jiffies;
lp->tx_started = 1;
netif_start_queue(dev);
} else {
if( sram_config == 0 ) {
if (lp->tx_queue_len < (4096 - (ETH_FRAME_LEN +2)) )
/* Yes, there is room for one more packet. */
netif_start_queue(dev);
} else {
if (lp->tx_queue_len < (8192 - (ETH_FRAME_LEN +2)) &&
lp->tx_queue < 127 )
/* Yes, there is room for one more packet. */
netif_start_queue(dev);
}
}
/* Re-enable interrupts */
outb(D_TX_INTR, ioaddr + TX_INTR);
outb(D_RX_INTR, ioaddr + RX_INTR);
}
dev_kfree_skb (skb);
return 0;
} /* fjn_start_xmit */
/*====================================================================*/
static void fjn_reset(struct net_device *dev)
{
struct local_info_t *lp = netdev_priv(dev);
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr = dev->base_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
int i;
DEBUG(4, "fjn_reset(%s) called.\n",dev->name);
/* Reset controller */
if( sram_config == 0 )
outb(CONFIG0_RST, ioaddr + CONFIG_0);
else
outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
/* Power On chip and select bank 0 */
if (lp->cardtype == MBH10302)
outb(BANK_0, ioaddr + CONFIG_1);
else
outb(BANK_0U, ioaddr + CONFIG_1);
/* Set Tx modes */
outb(D_TX_MODE, ioaddr + TX_MODE);
/* set Rx modes */
outb(ID_MATCHED, ioaddr + RX_MODE);
/* Set hardware address */
for (i = 0; i < 6; i++)
outb(dev->dev_addr[i], ioaddr + NODE_ID + i);
[netdrvr fmvj18x_cs] fix multicast bug * use set_rx_mode to (re)initialize the multicast table. * MC_FILTERBREAK is 64 (= 8 * 8bit) * remove local_info_t.mc_filter
2005-12-01 00:37:17 -07:00
/* (re)initialize the multicast table */
set_rx_mode(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Switch to bank 2 (runtime mode) */
if (lp->cardtype == MBH10302)
outb(BANK_2, ioaddr + CONFIG_1);
else
outb(BANK_2U, ioaddr + CONFIG_1);
/* set 16col ctrl bits */
if( lp->cardtype == TDK || lp->cardtype == CONTEC)
outb(TDK_AUTO_MODE, ioaddr + COL_CTRL);
else
outb(AUTO_MODE, ioaddr + COL_CTRL);
/* clear Reserved Regs */
outb(0x00, ioaddr + BMPR12);
outb(0x00, ioaddr + BMPR13);
/* reset Skip packet reg. */
outb(0x01, ioaddr + RX_SKIP);
/* Enable Tx and Rx */
if( sram_config == 0 )
outb(CONFIG0_DFL, ioaddr + CONFIG_0);
else
outb(CONFIG0_DFL_1, ioaddr + CONFIG_0);
/* Init receive pointer ? */
inw(ioaddr + DATAPORT);
inw(ioaddr + DATAPORT);
/* Clear all status */
outb(0xff, ioaddr + TX_STATUS);
outb(0xff, ioaddr + RX_STATUS);
if (lp->cardtype == MBH10302)
outb(INTR_OFF, ioaddr + LAN_CTRL);
/* Turn on Rx interrupts */
outb(D_TX_INTR, ioaddr + TX_INTR);
outb(D_RX_INTR, ioaddr + RX_INTR);
/* Turn on interrupts from LAN card controller */
if (lp->cardtype == MBH10302)
outb(INTR_ON, ioaddr + LAN_CTRL);
} /* fjn_reset */
/*====================================================================*/
static void fjn_rx(struct net_device *dev)
{
struct local_info_t *lp = netdev_priv(dev);
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr = dev->base_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
int boguscount = 10; /* 5 -> 10: by agy 19940922 */
DEBUG(4, "%s: in rx_packet(), rx_status %02x.\n",
dev->name, inb(ioaddr + RX_STATUS));
while ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == 0) {
u_short status = inw(ioaddr + DATAPORT);
DEBUG(4, "%s: Rxing packet mode %02x status %04x.\n",
dev->name, inb(ioaddr + RX_MODE), status);
#ifndef final_version
if (status == 0) {
outb(F_SKP_PKT, ioaddr + RX_SKIP);
break;
}
#endif
if ((status & 0xF0) != 0x20) { /* There was an error. */
lp->stats.rx_errors++;
if (status & F_LEN_ERR) lp->stats.rx_length_errors++;
if (status & F_ALG_ERR) lp->stats.rx_frame_errors++;
if (status & F_CRC_ERR) lp->stats.rx_crc_errors++;
if (status & F_OVR_FLO) lp->stats.rx_over_errors++;
} else {
u_short pkt_len = inw(ioaddr + DATAPORT);
/* Malloc up new buffer. */
struct sk_buff *skb;
if (pkt_len > 1550) {
printk(KERN_NOTICE "%s: The FMV-18x claimed a very "
"large packet, size %d.\n", dev->name, pkt_len);
outb(F_SKP_PKT, ioaddr + RX_SKIP);
lp->stats.rx_errors++;
break;
}
skb = dev_alloc_skb(pkt_len+2);
if (skb == NULL) {
printk(KERN_NOTICE "%s: Memory squeeze, dropping "
"packet (len %d).\n", dev->name, pkt_len);
outb(F_SKP_PKT, ioaddr + RX_SKIP);
lp->stats.rx_dropped++;
break;
}
skb_reserve(skb, 2);
insw(ioaddr + DATAPORT, skb_put(skb, pkt_len),
(pkt_len + 1) >> 1);
skb->protocol = eth_type_trans(skb, dev);
#ifdef PCMCIA_DEBUG
if (pc_debug > 5) {
int i;
printk(KERN_DEBUG "%s: Rxed packet of length %d: ",
dev->name, pkt_len);
for (i = 0; i < 14; i++)
printk(" %02x", skb->data[i]);
printk(".\n");
}
#endif
netif_rx(skb);
lp->stats.rx_packets++;
lp->stats.rx_bytes += pkt_len;
}
if (--boguscount <= 0)
break;
}
/* If any worth-while packets have been received, dev_rint()
has done a netif_wake_queue() for us and will work on them
when we get to the bottom-half routine. */
/*
if (lp->cardtype != TDK) {
int i;
for (i = 0; i < 20; i++) {
if ((inb(ioaddr + RX_MODE) & F_BUF_EMP) == F_BUF_EMP)
break;
(void)inw(ioaddr + DATAPORT); /+ dummy status read +/
outb(F_SKP_PKT, ioaddr + RX_SKIP);
}
if (i > 0)
DEBUG(5, "%s: Exint Rx packet with mode %02x after "
"%d ticks.\n", dev->name, inb(ioaddr + RX_MODE), i);
}
*/
return;
} /* fjn_rx */
/*====================================================================*/
static void netdev_get_drvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
strcpy(info->driver, DRV_NAME);
strcpy(info->version, DRV_VERSION);
sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
}
#ifdef PCMCIA_DEBUG
static u32 netdev_get_msglevel(struct net_device *dev)
{
return pc_debug;
}
static void netdev_set_msglevel(struct net_device *dev, u32 level)
{
pc_debug = level;
}
#endif /* PCMCIA_DEBUG */
drivers/net: const-ify ethtool_ops declarations Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-13 12:30:00 -06:00
static const struct ethtool_ops netdev_ethtool_ops = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
.get_drvinfo = netdev_get_drvinfo,
#ifdef PCMCIA_DEBUG
.get_msglevel = netdev_get_msglevel,
.set_msglevel = netdev_set_msglevel,
#endif /* PCMCIA_DEBUG */
};
static int fjn_config(struct net_device *dev, struct ifmap *map){
return 0;
}
static int fjn_open(struct net_device *dev)
{
struct local_info_t *lp = netdev_priv(dev);
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
struct pcmcia_device *link = lp->p_dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DEBUG(4, "fjn_open('%s').\n", dev->name);
[PATCH] pcmcia: convert DEV_OK to pcmcia_dev_present Instead of the DEV_OK macro, drivers should use pcmcia_dev_present(). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 03:04:33 -07:00
if (!pcmcia_dev_present(link))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return -ENODEV;
link->open++;
fjn_reset(dev);
lp->tx_started = 0;
lp->tx_queue = 0;
lp->tx_queue_len = 0;
lp->open_time = jiffies;
netif_start_queue(dev);
return 0;
} /* fjn_open */
/*====================================================================*/
static int fjn_close(struct net_device *dev)
{
struct local_info_t *lp = netdev_priv(dev);
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 08:21:06 -07:00
struct pcmcia_device *link = lp->p_dev;
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr = dev->base_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DEBUG(4, "fjn_close('%s').\n", dev->name);
lp->open_time = 0;
netif_stop_queue(dev);
/* Set configuration register 0 to disable Tx and Rx. */
if( sram_config == 0 )
outb(CONFIG0_RST ,ioaddr + CONFIG_0);
else
outb(CONFIG0_RST_1 ,ioaddr + CONFIG_0);
/* Update the statistics -- ToDo. */
/* Power-down the chip. Green, green, green! */
outb(CHIP_OFF ,ioaddr + CONFIG_1);
/* Set the ethernet adaptor disable IRQ */
if (lp->cardtype == MBH10302)
outb(INTR_OFF, ioaddr + LAN_CTRL);
link->open--;
return 0;
} /* fjn_close */
/*====================================================================*/
static struct net_device_stats *fjn_get_stats(struct net_device *dev)
{
local_info_t *lp = netdev_priv(dev);
return &lp->stats;
} /* fjn_get_stats */
/*====================================================================*/
/*
Set the multicast/promiscuous mode for this adaptor.
*/
static void set_rx_mode(struct net_device *dev)
{
pcmcia: replace kio_addr_t with unsigned int everywhere Remove kio_addr_t, and replace it with unsigned int. No known architecture needs more than 32 bits for IO addresses and ports and having a separate type for it is just messy. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@lst.de> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:35 -07:00
unsigned int ioaddr = dev->base_addr;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
u_char mc_filter[8]; /* Multicast hash filter */
u_long flags;
int i;
[netdrvr fmvj18x_cs] fix multicast bug * use set_rx_mode to (re)initialize the multicast table. * MC_FILTERBREAK is 64 (= 8 * 8bit) * remove local_info_t.mc_filter
2005-12-01 00:37:17 -07:00
int saved_bank;
[PATCH] network: fix fmvj18x_cs multicast code The multicast code of the fmvj18x_cs driver is broken. I fixed it to work properly. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-05 21:01:43 -06:00
int saved_config_0 = inb(ioaddr + CONFIG_0);
local_irq_save(flags);
/* Disable Tx and Rx */
if (sram_config == 0)
outb(CONFIG0_RST, ioaddr + CONFIG_0);
else
outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (dev->flags & IFF_PROMISC) {
memset(mc_filter, 0xff, sizeof(mc_filter));
outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */
} else if (dev->mc_count > MC_FILTERBREAK
|| (dev->flags & IFF_ALLMULTI)) {
/* Too many to filter perfectly -- accept all multicasts. */
memset(mc_filter, 0xff, sizeof(mc_filter));
outb(2, ioaddr + RX_MODE); /* Use normal mode. */
} else if (dev->mc_count == 0) {
memset(mc_filter, 0x00, sizeof(mc_filter));
outb(1, ioaddr + RX_MODE); /* Ignore almost all multicasts. */
} else {
struct dev_mc_list *mclist;
pcmcia/fmvj18x_cs: fix 'shadow variable' warning Fixing: CHECK drivers/net/pcmcia/fmvj18x_cs.c drivers/net/pcmcia/fmvj18x_cs.c:1205:6: warning: symbol 'i' shadows an earlier one drivers/net/pcmcia/fmvj18x_cs.c:1179:9: originally declared here Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-04 23:27:41 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
memset(mc_filter, 0, sizeof(mc_filter));
for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
i++, mclist = mclist->next) {
unsigned int bit =
[PATCH] network: fix fmvj18x_cs multicast code The multicast code of the fmvj18x_cs driver is broken. I fixed it to work properly. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-05 21:01:43 -06:00
ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
mc_filter[bit >> 3] |= (1 << (bit & 7));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] network: fix fmvj18x_cs multicast code The multicast code of the fmvj18x_cs driver is broken. I fixed it to work properly. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-05 21:01:43 -06:00
outb(2, ioaddr + RX_MODE); /* Use normal mode. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[netdrvr fmvj18x_cs] fix multicast bug * use set_rx_mode to (re)initialize the multicast table. * MC_FILTERBREAK is 64 (= 8 * 8bit) * remove local_info_t.mc_filter
2005-12-01 00:37:17 -07:00
/* Switch to bank 1 and set the multicast table. */
saved_bank = inb(ioaddr + CONFIG_1);
outb(0xe4, ioaddr + CONFIG_1);
for (i = 0; i < 8; i++)
outb(mc_filter[i], ioaddr + MAR_ADR + i);
outb(saved_bank, ioaddr + CONFIG_1);
[PATCH] network: fix fmvj18x_cs multicast code The multicast code of the fmvj18x_cs driver is broken. I fixed it to work properly. Signed-off-by: komurojun-mbn@nifty.com Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-05 21:01:43 -06:00
outb(saved_config_0, ioaddr + CONFIG_0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
local_irq_restore(flags);
}
Reference in a new issue Copy permalink