kernel-fxtec-pro1x/crypto/asymmetric_keys/pkcs7_verify.c

470 lines
13 KiB
C
Raw Normal View History

/* Verify the signature on a PKCS#7 message.
*
* Copyright (C) 2012 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#define pr_fmt(fmt) "PKCS7: "fmt
#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/asn1.h>
#include <crypto/hash.h>
#include <crypto/public_key.h>
#include "pkcs7_parser.h"
/*
* Digest the relevant parts of the PKCS#7 data
*/
static int pkcs7_digest(struct pkcs7_message *pkcs7,
struct pkcs7_signed_info *sinfo)
{
struct crypto_shash *tfm;
struct shash_desc *desc;
size_t digest_size, desc_size;
void *digest;
int ret;
kenter(",%u,%s", sinfo->index, sinfo->sig.hash_algo);
if (!sinfo->sig.hash_algo)
return -ENOPKG;
/* Allocate the hashing algorithm we're going to need and find out how
* big the hash operational data will be.
*/
tfm = crypto_alloc_shash(sinfo->sig.hash_algo, 0, 0);
if (IS_ERR(tfm))
return (PTR_ERR(tfm) == -ENOENT) ? -ENOPKG : PTR_ERR(tfm);
desc_size = crypto_shash_descsize(tfm) + sizeof(*desc);
sinfo->sig.digest_size = digest_size = crypto_shash_digestsize(tfm);
ret = -ENOMEM;
digest = kzalloc(ALIGN(digest_size, __alignof__(*desc)) + desc_size,
GFP_KERNEL);
if (!digest)
goto error_no_desc;
desc = PTR_ALIGN(digest + digest_size, __alignof__(*desc));
desc->tfm = tfm;
desc->flags = CRYPTO_TFM_REQ_MAY_SLEEP;
/* Digest the message [RFC2315 9.3] */
ret = crypto_shash_init(desc);
if (ret < 0)
goto error;
ret = crypto_shash_finup(desc, pkcs7->data, pkcs7->data_len, digest);
if (ret < 0)
goto error;
pr_devel("MsgDigest = [%*ph]\n", 8, digest);
/* However, if there are authenticated attributes, there must be a
* message digest attribute amongst them which corresponds to the
* digest we just calculated.
*/
PKCS#7: Appropriately restrict authenticated attributes and content type A PKCS#7 or CMS message can have per-signature authenticated attributes that are digested as a lump and signed by the authorising key for that signature. If such attributes exist, the content digest isn't itself signed, but rather it is included in a special authattr which then contributes to the signature. Further, we already require the master message content type to be pkcs7_signedData - but there's also a separate content type for the data itself within the SignedData object and this must be repeated inside the authattrs for each signer [RFC2315 9.2, RFC5652 11.1]. We should really validate the authattrs if they exist or forbid them entirely as appropriate. To this end: (1) Alter the PKCS#7 parser to reject any message that has more than one signature where at least one signature has authattrs and at least one that does not. (2) Validate authattrs if they are present and strongly restrict them. Only the following authattrs are permitted and all others are rejected: (a) contentType. This is checked to be an OID that matches the content type in the SignedData object. (b) messageDigest. This must match the crypto digest of the data. (c) signingTime. If present, we check that this is a valid, parseable UTCTime or GeneralTime and that the date it encodes fits within the validity window of the matching X.509 cert. (d) S/MIME capabilities. We don't check the contents. (e) Authenticode SP Opus Info. We don't check the contents. (f) Authenticode Statement Type. We don't check the contents. The message is rejected if (a) or (b) are missing. If the message is an Authenticode type, the message is rejected if (e) is missing; if not Authenticode, the message is rejected if (d) - (f) are present. The S/MIME capabilities authattr (d) unfortunately has to be allowed to support kernels already signed by the pesign program. This only affects kexec. sign-file suppresses them (CMS_NOSMIMECAP). The message is also rejected if an authattr is given more than once or if it contains more than one element in its set of values. (3) Add a parameter to pkcs7_verify() to select one of the following restrictions and pass in the appropriate option from the callers: (*) VERIFYING_MODULE_SIGNATURE This requires that the SignedData content type be pkcs7-data and forbids authattrs. sign-file sets CMS_NOATTR. We could be more flexible and permit authattrs optionally, but only permit minimal content. (*) VERIFYING_FIRMWARE_SIGNATURE This requires that the SignedData content type be pkcs7-data and requires authattrs. In future, this will require an attribute holding the target firmware name in addition to the minimal set. (*) VERIFYING_UNSPECIFIED_SIGNATURE This requires that the SignedData content type be pkcs7-data but allows either no authattrs or only permits the minimal set. (*) VERIFYING_KEXEC_PE_SIGNATURE This only supports the Authenticode SPC_INDIRECT_DATA content type and requires at least an SpcSpOpusInfo authattr in addition to the minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and an S/MIME capabilities authattr because the pesign program doesn't remove these). (*) VERIFYING_KEY_SIGNATURE (*) VERIFYING_KEY_SELF_SIGNATURE These are invalid in this context but are included for later use when limiting the use of X.509 certs. (4) The pkcs7_test key type is given a module parameter to select between the above options for testing purposes. For example: echo 1 >/sys/module/pkcs7_test_key/parameters/usage keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7 will attempt to check the signature on stuff.pkcs7 as if it contains a firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 08:22:27 -06:00
if (sinfo->authattrs) {
u8 tag;
PKCS#7: Appropriately restrict authenticated attributes and content type A PKCS#7 or CMS message can have per-signature authenticated attributes that are digested as a lump and signed by the authorising key for that signature. If such attributes exist, the content digest isn't itself signed, but rather it is included in a special authattr which then contributes to the signature. Further, we already require the master message content type to be pkcs7_signedData - but there's also a separate content type for the data itself within the SignedData object and this must be repeated inside the authattrs for each signer [RFC2315 9.2, RFC5652 11.1]. We should really validate the authattrs if they exist or forbid them entirely as appropriate. To this end: (1) Alter the PKCS#7 parser to reject any message that has more than one signature where at least one signature has authattrs and at least one that does not. (2) Validate authattrs if they are present and strongly restrict them. Only the following authattrs are permitted and all others are rejected: (a) contentType. This is checked to be an OID that matches the content type in the SignedData object. (b) messageDigest. This must match the crypto digest of the data. (c) signingTime. If present, we check that this is a valid, parseable UTCTime or GeneralTime and that the date it encodes fits within the validity window of the matching X.509 cert. (d) S/MIME capabilities. We don't check the contents. (e) Authenticode SP Opus Info. We don't check the contents. (f) Authenticode Statement Type. We don't check the contents. The message is rejected if (a) or (b) are missing. If the message is an Authenticode type, the message is rejected if (e) is missing; if not Authenticode, the message is rejected if (d) - (f) are present. The S/MIME capabilities authattr (d) unfortunately has to be allowed to support kernels already signed by the pesign program. This only affects kexec. sign-file suppresses them (CMS_NOSMIMECAP). The message is also rejected if an authattr is given more than once or if it contains more than one element in its set of values. (3) Add a parameter to pkcs7_verify() to select one of the following restrictions and pass in the appropriate option from the callers: (*) VERIFYING_MODULE_SIGNATURE This requires that the SignedData content type be pkcs7-data and forbids authattrs. sign-file sets CMS_NOATTR. We could be more flexible and permit authattrs optionally, but only permit minimal content. (*) VERIFYING_FIRMWARE_SIGNATURE This requires that the SignedData content type be pkcs7-data and requires authattrs. In future, this will require an attribute holding the target firmware name in addition to the minimal set. (*) VERIFYING_UNSPECIFIED_SIGNATURE This requires that the SignedData content type be pkcs7-data but allows either no authattrs or only permits the minimal set. (*) VERIFYING_KEXEC_PE_SIGNATURE This only supports the Authenticode SPC_INDIRECT_DATA content type and requires at least an SpcSpOpusInfo authattr in addition to the minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and an S/MIME capabilities authattr because the pesign program doesn't remove these). (*) VERIFYING_KEY_SIGNATURE (*) VERIFYING_KEY_SELF_SIGNATURE These are invalid in this context but are included for later use when limiting the use of X.509 certs. (4) The pkcs7_test key type is given a module parameter to select between the above options for testing purposes. For example: echo 1 >/sys/module/pkcs7_test_key/parameters/usage keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7 will attempt to check the signature on stuff.pkcs7 as if it contains a firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 08:22:27 -06:00
if (!sinfo->msgdigest) {
pr_warn("Sig %u: No messageDigest\n", sinfo->index);
ret = -EKEYREJECTED;
goto error;
}
if (sinfo->msgdigest_len != sinfo->sig.digest_size) {
pr_debug("Sig %u: Invalid digest size (%u)\n",
sinfo->index, sinfo->msgdigest_len);
ret = -EBADMSG;
goto error;
}
if (memcmp(digest, sinfo->msgdigest, sinfo->msgdigest_len) != 0) {
pr_debug("Sig %u: Message digest doesn't match\n",
sinfo->index);
ret = -EKEYREJECTED;
goto error;
}
/* We then calculate anew, using the authenticated attributes
* as the contents of the digest instead. Note that we need to
* convert the attributes from a CONT.0 into a SET before we
* hash it.
*/
memset(digest, 0, sinfo->sig.digest_size);
ret = crypto_shash_init(desc);
if (ret < 0)
goto error;
tag = ASN1_CONS_BIT | ASN1_SET;
ret = crypto_shash_update(desc, &tag, 1);
if (ret < 0)
goto error;
ret = crypto_shash_finup(desc, sinfo->authattrs,
sinfo->authattrs_len, digest);
if (ret < 0)
goto error;
pr_devel("AADigest = [%*ph]\n", 8, digest);
}
sinfo->sig.digest = digest;
digest = NULL;
error:
kfree(digest);
error_no_desc:
crypto_free_shash(tfm);
kleave(" = %d", ret);
return ret;
}
/*
* Find the key (X.509 certificate) to use to verify a PKCS#7 message. PKCS#7
* uses the issuer's name and the issuing certificate serial number for
* matching purposes. These must match the certificate issuer's name (not
* subject's name) and the certificate serial number [RFC 2315 6.7].
*/
static int pkcs7_find_key(struct pkcs7_message *pkcs7,
struct pkcs7_signed_info *sinfo)
{
struct x509_certificate *x509;
unsigned certix = 1;
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 10:36:13 -06:00
kenter("%u", sinfo->index);
for (x509 = pkcs7->certs; x509; x509 = x509->next, certix++) {
/* I'm _assuming_ that the generator of the PKCS#7 message will
* encode the fields from the X.509 cert in the same way in the
* PKCS#7 message - but I can't be 100% sure of that. It's
* possible this will need element-by-element comparison.
*/
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 10:36:13 -06:00
if (!asymmetric_key_id_same(x509->id, sinfo->signing_cert_id))
continue;
pr_devel("Sig %u: Found cert serial match X.509[%u]\n",
sinfo->index, certix);
if (x509->pub->pkey_algo != sinfo->sig.pkey_algo) {
pr_warn("Sig %u: X.509 algo and PKCS#7 sig algo don't match\n",
sinfo->index);
continue;
}
sinfo->signer = x509;
return 0;
}
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 10:36:13 -06:00
/* The relevant X.509 cert isn't found here, but it might be found in
* the trust keyring.
*/
pr_debug("Sig %u: Issuing X.509 cert not found (#%*phN)\n",
sinfo->index,
sinfo->signing_cert_id->len, sinfo->signing_cert_id->data);
return 0;
}
/*
* Verify the internal certificate chain as best we can.
*/
static int pkcs7_verify_sig_chain(struct pkcs7_message *pkcs7,
struct pkcs7_signed_info *sinfo)
{
struct x509_certificate *x509 = sinfo->signer, *p;
struct asymmetric_key_id *auth;
int ret;
kenter("");
for (p = pkcs7->certs; p; p = p->next)
p->seen = false;
for (;;) {
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 10:36:13 -06:00
pr_debug("verify %s: %*phN\n",
x509->subject,
x509->raw_serial_size, x509->raw_serial);
x509->seen = true;
ret = x509_get_sig_params(x509);
if (ret < 0)
goto maybe_missing_crypto_in_x509;
pr_debug("- issuer %s\n", x509->issuer);
if (x509->akid_id)
pr_debug("- authkeyid.id %*phN\n",
x509->akid_id->len, x509->akid_id->data);
if (x509->akid_skid)
pr_debug("- authkeyid.skid %*phN\n",
x509->akid_skid->len, x509->akid_skid->data);
if ((!x509->akid_id && !x509->akid_skid) ||
strcmp(x509->subject, x509->issuer) == 0) {
/* If there's no authority certificate specified, then
* the certificate must be self-signed and is the root
* of the chain. Likewise if the cert is its own
* authority.
*/
pr_debug("- no auth?\n");
if (x509->raw_subject_size != x509->raw_issuer_size ||
memcmp(x509->raw_subject, x509->raw_issuer,
x509->raw_issuer_size) != 0)
return 0;
ret = x509_check_signature(x509->pub, x509);
if (ret < 0)
goto maybe_missing_crypto_in_x509;
x509->signer = x509;
pr_debug("- self-signed\n");
return 0;
}
/* Look through the X.509 certificates in the PKCS#7 message's
* list to see if the next one is there.
*/
auth = x509->akid_id;
if (auth) {
pr_debug("- want %*phN\n", auth->len, auth->data);
for (p = pkcs7->certs; p; p = p->next) {
pr_debug("- cmp [%u] %*phN\n",
p->index, p->id->len, p->id->data);
if (asymmetric_key_id_same(p->id, auth))
goto found_issuer_check_skid;
}
} else {
auth = x509->akid_skid;
pr_debug("- want %*phN\n", auth->len, auth->data);
for (p = pkcs7->certs; p; p = p->next) {
if (!p->skid)
continue;
pr_debug("- cmp [%u] %*phN\n",
p->index, p->skid->len, p->skid->data);
if (asymmetric_key_id_same(p->skid, auth))
goto found_issuer;
}
}
/* We didn't find the root of this chain */
pr_debug("- top\n");
return 0;
found_issuer_check_skid:
/* We matched issuer + serialNumber, but if there's an
* authKeyId.keyId, that must match the CA subjKeyId also.
*/
if (x509->akid_skid &&
!asymmetric_key_id_same(p->skid, x509->akid_skid)) {
pr_warn("Sig %u: X.509 chain contains auth-skid nonmatch (%u->%u)\n",
sinfo->index, x509->index, p->index);
return -EKEYREJECTED;
}
found_issuer:
KEYS: Overhaul key identification when searching for asymmetric keys Make use of the new match string preparsing to overhaul key identification when searching for asymmetric keys. The following changes are made: (1) Use the previously created asymmetric_key_id struct to hold the following key IDs derived from the X.509 certificate or PKCS#7 message: id: serial number + issuer skid: subjKeyId + subject authority: authKeyId + issuer (2) Replace the hex fingerprint attached to key->type_data[1] with an asymmetric_key_ids struct containing the id and the skid (if present). (3) Make the asymmetric_type match data preparse select one of two searches: (a) An iterative search for the key ID given if prefixed with "id:". The prefix is expected to be followed by a hex string giving the ID to search for. The criterion key ID is checked against all key IDs recorded on the key. (b) A direct search if the key ID is not prefixed with "id:". This will look for an exact match on the key description. (4) Make x509_request_asymmetric_key() take a key ID. This is then converted into "id:<hex>" and passed into keyring_search() where match preparsing will turn it back into a binary ID. (5) X.509 certificate verification then takes the authority key ID and looks up a key that matches it to find the public key for the certificate signature. (6) PKCS#7 certificate verification then takes the id key ID and looks up a key that matches it to find the public key for the signed information block signature. Additional changes: (1) Multiple subjKeyId and authKeyId values on an X.509 certificate cause the cert to be rejected with -EBADMSG. (2) The 'fingerprint' ID is gone. This was primarily intended to convey PGP public key fingerprints. If PGP is supported in future, this should generate a key ID that carries the fingerprint. (3) Th ca_keyid= kernel command line option is now converted to a key ID and used to match the authority key ID. Possibly this should only match the actual authKeyId part and not the issuer as well. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Vivek Goyal <vgoyal@redhat.com>
2014-09-16 10:36:13 -06:00
pr_debug("- subject %s\n", p->subject);
if (p->seen) {
pr_warn("Sig %u: X.509 chain contains loop\n",
sinfo->index);
return 0;
}
ret = x509_check_signature(p->pub, x509);
if (ret < 0)
return ret;
x509->signer = p;
if (x509 == p) {
pr_debug("- self-signed\n");
return 0;
}
x509 = p;
might_sleep();
}
maybe_missing_crypto_in_x509:
/* Just prune the certificate chain at this point if we lack some
* crypto module to go further. Note, however, we don't want to set
* sinfo->missing_crypto as the signed info block may still be
* validatable against an X.509 cert lower in the chain that we have a
* trusted copy of.
*/
if (ret == -ENOPKG)
return 0;
return ret;
}
/*
* Verify one signed information block from a PKCS#7 message.
*/
static int pkcs7_verify_one(struct pkcs7_message *pkcs7,
struct pkcs7_signed_info *sinfo)
{
int ret;
kenter(",%u", sinfo->index);
/* First of all, digest the data in the PKCS#7 message and the
* signed information block
*/
ret = pkcs7_digest(pkcs7, sinfo);
if (ret < 0)
return ret;
/* Find the key for the signature if there is one */
ret = pkcs7_find_key(pkcs7, sinfo);
if (ret < 0)
return ret;
if (!sinfo->signer)
return 0;
pr_devel("Using X.509[%u] for sig %u\n",
sinfo->signer->index, sinfo->index);
PKCS#7: Appropriately restrict authenticated attributes and content type A PKCS#7 or CMS message can have per-signature authenticated attributes that are digested as a lump and signed by the authorising key for that signature. If such attributes exist, the content digest isn't itself signed, but rather it is included in a special authattr which then contributes to the signature. Further, we already require the master message content type to be pkcs7_signedData - but there's also a separate content type for the data itself within the SignedData object and this must be repeated inside the authattrs for each signer [RFC2315 9.2, RFC5652 11.1]. We should really validate the authattrs if they exist or forbid them entirely as appropriate. To this end: (1) Alter the PKCS#7 parser to reject any message that has more than one signature where at least one signature has authattrs and at least one that does not. (2) Validate authattrs if they are present and strongly restrict them. Only the following authattrs are permitted and all others are rejected: (a) contentType. This is checked to be an OID that matches the content type in the SignedData object. (b) messageDigest. This must match the crypto digest of the data. (c) signingTime. If present, we check that this is a valid, parseable UTCTime or GeneralTime and that the date it encodes fits within the validity window of the matching X.509 cert. (d) S/MIME capabilities. We don't check the contents. (e) Authenticode SP Opus Info. We don't check the contents. (f) Authenticode Statement Type. We don't check the contents. The message is rejected if (a) or (b) are missing. If the message is an Authenticode type, the message is rejected if (e) is missing; if not Authenticode, the message is rejected if (d) - (f) are present. The S/MIME capabilities authattr (d) unfortunately has to be allowed to support kernels already signed by the pesign program. This only affects kexec. sign-file suppresses them (CMS_NOSMIMECAP). The message is also rejected if an authattr is given more than once or if it contains more than one element in its set of values. (3) Add a parameter to pkcs7_verify() to select one of the following restrictions and pass in the appropriate option from the callers: (*) VERIFYING_MODULE_SIGNATURE This requires that the SignedData content type be pkcs7-data and forbids authattrs. sign-file sets CMS_NOATTR. We could be more flexible and permit authattrs optionally, but only permit minimal content. (*) VERIFYING_FIRMWARE_SIGNATURE This requires that the SignedData content type be pkcs7-data and requires authattrs. In future, this will require an attribute holding the target firmware name in addition to the minimal set. (*) VERIFYING_UNSPECIFIED_SIGNATURE This requires that the SignedData content type be pkcs7-data but allows either no authattrs or only permits the minimal set. (*) VERIFYING_KEXEC_PE_SIGNATURE This only supports the Authenticode SPC_INDIRECT_DATA content type and requires at least an SpcSpOpusInfo authattr in addition to the minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and an S/MIME capabilities authattr because the pesign program doesn't remove these). (*) VERIFYING_KEY_SIGNATURE (*) VERIFYING_KEY_SELF_SIGNATURE These are invalid in this context but are included for later use when limiting the use of X.509 certs. (4) The pkcs7_test key type is given a module parameter to select between the above options for testing purposes. For example: echo 1 >/sys/module/pkcs7_test_key/parameters/usage keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7 will attempt to check the signature on stuff.pkcs7 as if it contains a firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 08:22:27 -06:00
/* Check that the PKCS#7 signing time is valid according to the X.509
* certificate. We can't, however, check against the system clock
* since that may not have been set yet and may be wrong.
*/
if (test_bit(sinfo_has_signing_time, &sinfo->aa_set)) {
if (sinfo->signing_time < sinfo->signer->valid_from ||
sinfo->signing_time > sinfo->signer->valid_to) {
pr_warn("Message signed outside of X.509 validity window\n");
return -EKEYREJECTED;
}
}
/* Verify the PKCS#7 binary against the key */
ret = public_key_verify_signature(sinfo->signer->pub, &sinfo->sig);
if (ret < 0)
return ret;
pr_devel("Verified signature %u\n", sinfo->index);
/* Verify the internal certificate chain */
return pkcs7_verify_sig_chain(pkcs7, sinfo);
}
/**
* pkcs7_verify - Verify a PKCS#7 message
* @pkcs7: The PKCS#7 message to be verified
PKCS#7: Appropriately restrict authenticated attributes and content type A PKCS#7 or CMS message can have per-signature authenticated attributes that are digested as a lump and signed by the authorising key for that signature. If such attributes exist, the content digest isn't itself signed, but rather it is included in a special authattr which then contributes to the signature. Further, we already require the master message content type to be pkcs7_signedData - but there's also a separate content type for the data itself within the SignedData object and this must be repeated inside the authattrs for each signer [RFC2315 9.2, RFC5652 11.1]. We should really validate the authattrs if they exist or forbid them entirely as appropriate. To this end: (1) Alter the PKCS#7 parser to reject any message that has more than one signature where at least one signature has authattrs and at least one that does not. (2) Validate authattrs if they are present and strongly restrict them. Only the following authattrs are permitted and all others are rejected: (a) contentType. This is checked to be an OID that matches the content type in the SignedData object. (b) messageDigest. This must match the crypto digest of the data. (c) signingTime. If present, we check that this is a valid, parseable UTCTime or GeneralTime and that the date it encodes fits within the validity window of the matching X.509 cert. (d) S/MIME capabilities. We don't check the contents. (e) Authenticode SP Opus Info. We don't check the contents. (f) Authenticode Statement Type. We don't check the contents. The message is rejected if (a) or (b) are missing. If the message is an Authenticode type, the message is rejected if (e) is missing; if not Authenticode, the message is rejected if (d) - (f) are present. The S/MIME capabilities authattr (d) unfortunately has to be allowed to support kernels already signed by the pesign program. This only affects kexec. sign-file suppresses them (CMS_NOSMIMECAP). The message is also rejected if an authattr is given more than once or if it contains more than one element in its set of values. (3) Add a parameter to pkcs7_verify() to select one of the following restrictions and pass in the appropriate option from the callers: (*) VERIFYING_MODULE_SIGNATURE This requires that the SignedData content type be pkcs7-data and forbids authattrs. sign-file sets CMS_NOATTR. We could be more flexible and permit authattrs optionally, but only permit minimal content. (*) VERIFYING_FIRMWARE_SIGNATURE This requires that the SignedData content type be pkcs7-data and requires authattrs. In future, this will require an attribute holding the target firmware name in addition to the minimal set. (*) VERIFYING_UNSPECIFIED_SIGNATURE This requires that the SignedData content type be pkcs7-data but allows either no authattrs or only permits the minimal set. (*) VERIFYING_KEXEC_PE_SIGNATURE This only supports the Authenticode SPC_INDIRECT_DATA content type and requires at least an SpcSpOpusInfo authattr in addition to the minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and an S/MIME capabilities authattr because the pesign program doesn't remove these). (*) VERIFYING_KEY_SIGNATURE (*) VERIFYING_KEY_SELF_SIGNATURE These are invalid in this context but are included for later use when limiting the use of X.509 certs. (4) The pkcs7_test key type is given a module parameter to select between the above options for testing purposes. For example: echo 1 >/sys/module/pkcs7_test_key/parameters/usage keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7 will attempt to check the signature on stuff.pkcs7 as if it contains a firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 08:22:27 -06:00
* @usage: The use to which the key is being put
*
* Verify a PKCS#7 message is internally consistent - that is, the data digest
* matches the digest in the AuthAttrs and any signature in the message or one
* of the X.509 certificates it carries that matches another X.509 cert in the
* message can be verified.
*
* This does not look to match the contents of the PKCS#7 message against any
* external public keys.
*
* Returns, in order of descending priority:
*
PKCS#7: Appropriately restrict authenticated attributes and content type A PKCS#7 or CMS message can have per-signature authenticated attributes that are digested as a lump and signed by the authorising key for that signature. If such attributes exist, the content digest isn't itself signed, but rather it is included in a special authattr which then contributes to the signature. Further, we already require the master message content type to be pkcs7_signedData - but there's also a separate content type for the data itself within the SignedData object and this must be repeated inside the authattrs for each signer [RFC2315 9.2, RFC5652 11.1]. We should really validate the authattrs if they exist or forbid them entirely as appropriate. To this end: (1) Alter the PKCS#7 parser to reject any message that has more than one signature where at least one signature has authattrs and at least one that does not. (2) Validate authattrs if they are present and strongly restrict them. Only the following authattrs are permitted and all others are rejected: (a) contentType. This is checked to be an OID that matches the content type in the SignedData object. (b) messageDigest. This must match the crypto digest of the data. (c) signingTime. If present, we check that this is a valid, parseable UTCTime or GeneralTime and that the date it encodes fits within the validity window of the matching X.509 cert. (d) S/MIME capabilities. We don't check the contents. (e) Authenticode SP Opus Info. We don't check the contents. (f) Authenticode Statement Type. We don't check the contents. The message is rejected if (a) or (b) are missing. If the message is an Authenticode type, the message is rejected if (e) is missing; if not Authenticode, the message is rejected if (d) - (f) are present. The S/MIME capabilities authattr (d) unfortunately has to be allowed to support kernels already signed by the pesign program. This only affects kexec. sign-file suppresses them (CMS_NOSMIMECAP). The message is also rejected if an authattr is given more than once or if it contains more than one element in its set of values. (3) Add a parameter to pkcs7_verify() to select one of the following restrictions and pass in the appropriate option from the callers: (*) VERIFYING_MODULE_SIGNATURE This requires that the SignedData content type be pkcs7-data and forbids authattrs. sign-file sets CMS_NOATTR. We could be more flexible and permit authattrs optionally, but only permit minimal content. (*) VERIFYING_FIRMWARE_SIGNATURE This requires that the SignedData content type be pkcs7-data and requires authattrs. In future, this will require an attribute holding the target firmware name in addition to the minimal set. (*) VERIFYING_UNSPECIFIED_SIGNATURE This requires that the SignedData content type be pkcs7-data but allows either no authattrs or only permits the minimal set. (*) VERIFYING_KEXEC_PE_SIGNATURE This only supports the Authenticode SPC_INDIRECT_DATA content type and requires at least an SpcSpOpusInfo authattr in addition to the minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and an S/MIME capabilities authattr because the pesign program doesn't remove these). (*) VERIFYING_KEY_SIGNATURE (*) VERIFYING_KEY_SELF_SIGNATURE These are invalid in this context but are included for later use when limiting the use of X.509 certs. (4) The pkcs7_test key type is given a module parameter to select between the above options for testing purposes. For example: echo 1 >/sys/module/pkcs7_test_key/parameters/usage keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7 will attempt to check the signature on stuff.pkcs7 as if it contains a firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 08:22:27 -06:00
* (*) -EKEYREJECTED if a key was selected that had a usage restriction at
* odds with the specified usage, or:
*
* (*) -EKEYREJECTED if a signature failed to match for which we found an
* appropriate X.509 certificate, or:
*
* (*) -EBADMSG if some part of the message was invalid, or:
*
* (*) -ENOPKG if none of the signature chains are verifiable because suitable
* crypto modules couldn't be found, or:
*
* (*) 0 if all the signature chains that don't incur -ENOPKG can be verified
* (note that a signature chain may be of zero length), or:
*/
PKCS#7: Appropriately restrict authenticated attributes and content type A PKCS#7 or CMS message can have per-signature authenticated attributes that are digested as a lump and signed by the authorising key for that signature. If such attributes exist, the content digest isn't itself signed, but rather it is included in a special authattr which then contributes to the signature. Further, we already require the master message content type to be pkcs7_signedData - but there's also a separate content type for the data itself within the SignedData object and this must be repeated inside the authattrs for each signer [RFC2315 9.2, RFC5652 11.1]. We should really validate the authattrs if they exist or forbid them entirely as appropriate. To this end: (1) Alter the PKCS#7 parser to reject any message that has more than one signature where at least one signature has authattrs and at least one that does not. (2) Validate authattrs if they are present and strongly restrict them. Only the following authattrs are permitted and all others are rejected: (a) contentType. This is checked to be an OID that matches the content type in the SignedData object. (b) messageDigest. This must match the crypto digest of the data. (c) signingTime. If present, we check that this is a valid, parseable UTCTime or GeneralTime and that the date it encodes fits within the validity window of the matching X.509 cert. (d) S/MIME capabilities. We don't check the contents. (e) Authenticode SP Opus Info. We don't check the contents. (f) Authenticode Statement Type. We don't check the contents. The message is rejected if (a) or (b) are missing. If the message is an Authenticode type, the message is rejected if (e) is missing; if not Authenticode, the message is rejected if (d) - (f) are present. The S/MIME capabilities authattr (d) unfortunately has to be allowed to support kernels already signed by the pesign program. This only affects kexec. sign-file suppresses them (CMS_NOSMIMECAP). The message is also rejected if an authattr is given more than once or if it contains more than one element in its set of values. (3) Add a parameter to pkcs7_verify() to select one of the following restrictions and pass in the appropriate option from the callers: (*) VERIFYING_MODULE_SIGNATURE This requires that the SignedData content type be pkcs7-data and forbids authattrs. sign-file sets CMS_NOATTR. We could be more flexible and permit authattrs optionally, but only permit minimal content. (*) VERIFYING_FIRMWARE_SIGNATURE This requires that the SignedData content type be pkcs7-data and requires authattrs. In future, this will require an attribute holding the target firmware name in addition to the minimal set. (*) VERIFYING_UNSPECIFIED_SIGNATURE This requires that the SignedData content type be pkcs7-data but allows either no authattrs or only permits the minimal set. (*) VERIFYING_KEXEC_PE_SIGNATURE This only supports the Authenticode SPC_INDIRECT_DATA content type and requires at least an SpcSpOpusInfo authattr in addition to the minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and an S/MIME capabilities authattr because the pesign program doesn't remove these). (*) VERIFYING_KEY_SIGNATURE (*) VERIFYING_KEY_SELF_SIGNATURE These are invalid in this context but are included for later use when limiting the use of X.509 certs. (4) The pkcs7_test key type is given a module parameter to select between the above options for testing purposes. For example: echo 1 >/sys/module/pkcs7_test_key/parameters/usage keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7 will attempt to check the signature on stuff.pkcs7 as if it contains a firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 08:22:27 -06:00
int pkcs7_verify(struct pkcs7_message *pkcs7,
enum key_being_used_for usage)
{
struct pkcs7_signed_info *sinfo;
struct x509_certificate *x509;
int enopkg = -ENOPKG;
int ret, n;
kenter("");
PKCS#7: Appropriately restrict authenticated attributes and content type A PKCS#7 or CMS message can have per-signature authenticated attributes that are digested as a lump and signed by the authorising key for that signature. If such attributes exist, the content digest isn't itself signed, but rather it is included in a special authattr which then contributes to the signature. Further, we already require the master message content type to be pkcs7_signedData - but there's also a separate content type for the data itself within the SignedData object and this must be repeated inside the authattrs for each signer [RFC2315 9.2, RFC5652 11.1]. We should really validate the authattrs if they exist or forbid them entirely as appropriate. To this end: (1) Alter the PKCS#7 parser to reject any message that has more than one signature where at least one signature has authattrs and at least one that does not. (2) Validate authattrs if they are present and strongly restrict them. Only the following authattrs are permitted and all others are rejected: (a) contentType. This is checked to be an OID that matches the content type in the SignedData object. (b) messageDigest. This must match the crypto digest of the data. (c) signingTime. If present, we check that this is a valid, parseable UTCTime or GeneralTime and that the date it encodes fits within the validity window of the matching X.509 cert. (d) S/MIME capabilities. We don't check the contents. (e) Authenticode SP Opus Info. We don't check the contents. (f) Authenticode Statement Type. We don't check the contents. The message is rejected if (a) or (b) are missing. If the message is an Authenticode type, the message is rejected if (e) is missing; if not Authenticode, the message is rejected if (d) - (f) are present. The S/MIME capabilities authattr (d) unfortunately has to be allowed to support kernels already signed by the pesign program. This only affects kexec. sign-file suppresses them (CMS_NOSMIMECAP). The message is also rejected if an authattr is given more than once or if it contains more than one element in its set of values. (3) Add a parameter to pkcs7_verify() to select one of the following restrictions and pass in the appropriate option from the callers: (*) VERIFYING_MODULE_SIGNATURE This requires that the SignedData content type be pkcs7-data and forbids authattrs. sign-file sets CMS_NOATTR. We could be more flexible and permit authattrs optionally, but only permit minimal content. (*) VERIFYING_FIRMWARE_SIGNATURE This requires that the SignedData content type be pkcs7-data and requires authattrs. In future, this will require an attribute holding the target firmware name in addition to the minimal set. (*) VERIFYING_UNSPECIFIED_SIGNATURE This requires that the SignedData content type be pkcs7-data but allows either no authattrs or only permits the minimal set. (*) VERIFYING_KEXEC_PE_SIGNATURE This only supports the Authenticode SPC_INDIRECT_DATA content type and requires at least an SpcSpOpusInfo authattr in addition to the minimal set. It also permits an SPC_STATEMENT_TYPE authattr (and an S/MIME capabilities authattr because the pesign program doesn't remove these). (*) VERIFYING_KEY_SIGNATURE (*) VERIFYING_KEY_SELF_SIGNATURE These are invalid in this context but are included for later use when limiting the use of X.509 certs. (4) The pkcs7_test key type is given a module parameter to select between the above options for testing purposes. For example: echo 1 >/sys/module/pkcs7_test_key/parameters/usage keyctl padd pkcs7_test foo @s </tmp/stuff.pkcs7 will attempt to check the signature on stuff.pkcs7 as if it contains a firmware blob (1 being VERIFYING_FIRMWARE_SIGNATURE). Suggested-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marcel Holtmann <marcel@holtmann.org> Reviewed-by: David Woodhouse <David.Woodhouse@intel.com>
2015-08-05 08:22:27 -06:00
switch (usage) {
case VERIFYING_MODULE_SIGNATURE:
if (pkcs7->data_type != OID_data) {
pr_warn("Invalid module sig (not pkcs7-data)\n");
return -EKEYREJECTED;
}
if (pkcs7->have_authattrs) {
pr_warn("Invalid module sig (has authattrs)\n");
return -EKEYREJECTED;
}
break;
case VERIFYING_FIRMWARE_SIGNATURE:
if (pkcs7->data_type != OID_data) {
pr_warn("Invalid firmware sig (not pkcs7-data)\n");
return -EKEYREJECTED;
}
if (!pkcs7->have_authattrs) {
pr_warn("Invalid firmware sig (missing authattrs)\n");
return -EKEYREJECTED;
}
break;
case VERIFYING_KEXEC_PE_SIGNATURE:
if (pkcs7->data_type != OID_msIndirectData) {
pr_warn("Invalid kexec sig (not Authenticode)\n");
return -EKEYREJECTED;
}
/* Authattr presence checked in parser */
break;
case VERIFYING_UNSPECIFIED_SIGNATURE:
if (pkcs7->data_type != OID_data) {
pr_warn("Invalid unspecified sig (not pkcs7-data)\n");
return -EKEYREJECTED;
}
break;
default:
return -EINVAL;
}
for (n = 0, x509 = pkcs7->certs; x509; x509 = x509->next, n++) {
ret = x509_get_sig_params(x509);
if (ret < 0)
return ret;
}
for (sinfo = pkcs7->signed_infos; sinfo; sinfo = sinfo->next) {
ret = pkcs7_verify_one(pkcs7, sinfo);
if (ret < 0) {
if (ret == -ENOPKG) {
sinfo->unsupported_crypto = true;
continue;
}
kleave(" = %d", ret);
return ret;
}
enopkg = 0;
}
kleave(" = %d", enopkg);
return enopkg;
}
EXPORT_SYMBOL_GPL(pkcs7_verify);
/**
* pkcs7_supply_detached_data - Supply the data needed to verify a PKCS#7 message
* @pkcs7: The PKCS#7 message
* @data: The data to be verified
* @datalen: The amount of data
*
* Supply the detached data needed to verify a PKCS#7 message. Note that no
* attempt to retain/pin the data is made. That is left to the caller. The
* data will not be modified by pkcs7_verify() and will not be freed when the
* PKCS#7 message is freed.
*
* Returns -EINVAL if data is already supplied in the message, 0 otherwise.
*/
int pkcs7_supply_detached_data(struct pkcs7_message *pkcs7,
const void *data, size_t datalen)
{
if (pkcs7->data) {
pr_debug("Data already supplied\n");
return -EINVAL;
}
pkcs7->data = data;
pkcs7->data_len = datalen;
return 0;
}