2013-03-13 05:32:13 -06:00
|
|
|
/*
|
|
|
|
* Renesas R-Car GPIO Support
|
|
|
|
*
|
2014-11-07 04:54:08 -07:00
|
|
|
* Copyright (C) 2014 Renesas Electronics Corporation
|
2013-03-13 05:32:13 -06:00
|
|
|
* Copyright (C) 2013 Magnus Damm
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License as published by
|
|
|
|
* the Free Software Foundation; either version 2 of the License
|
|
|
|
*
|
|
|
|
* This program is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
* GNU General Public License for more details.
|
|
|
|
*/
|
|
|
|
|
2015-03-18 12:41:09 -06:00
|
|
|
#include <linux/clk.h>
|
2013-03-13 05:32:13 -06:00
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/gpio.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
#include <linux/irq.h>
|
|
|
|
#include <linux/module.h>
|
2013-10-16 04:05:02 -06:00
|
|
|
#include <linux/of.h>
|
2017-10-04 06:16:16 -06:00
|
|
|
#include <linux/of_device.h>
|
2013-03-09 19:27:00 -07:00
|
|
|
#include <linux/pinctrl/consumer.h>
|
2013-03-13 05:32:13 -06:00
|
|
|
#include <linux/platform_device.h>
|
2014-04-14 12:33:13 -06:00
|
|
|
#include <linux/pm_runtime.h>
|
2013-03-13 05:32:13 -06:00
|
|
|
#include <linux/spinlock.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
|
|
|
struct gpio_rcar_priv {
|
|
|
|
void __iomem *base;
|
|
|
|
spinlock_t lock;
|
|
|
|
struct platform_device *pdev;
|
|
|
|
struct gpio_chip gpio_chip;
|
|
|
|
struct irq_chip irq_chip;
|
2015-03-18 12:41:09 -06:00
|
|
|
struct clk *clk;
|
2015-12-04 08:33:52 -07:00
|
|
|
unsigned int irq_parent;
|
|
|
|
bool has_both_edge_trigger;
|
2015-12-04 08:33:53 -07:00
|
|
|
bool needs_clk;
|
2013-03-13 05:32:13 -06:00
|
|
|
};
|
|
|
|
|
2015-03-18 12:41:08 -06:00
|
|
|
#define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */
|
|
|
|
#define INOUTSEL 0x04 /* General Input/Output Switching Register */
|
|
|
|
#define OUTDT 0x08 /* General Output Register */
|
|
|
|
#define INDT 0x0c /* General Input Register */
|
|
|
|
#define INTDT 0x10 /* Interrupt Display Register */
|
|
|
|
#define INTCLR 0x14 /* Interrupt Clear Register */
|
|
|
|
#define INTMSK 0x18 /* Interrupt Mask Register */
|
|
|
|
#define MSKCLR 0x1c /* Interrupt Mask Clear Register */
|
|
|
|
#define POSNEG 0x20 /* Positive/Negative Logic Select Register */
|
|
|
|
#define EDGLEVEL 0x24 /* Edge/level Select Register */
|
|
|
|
#define FILONOFF 0x28 /* Chattering Prevention On/Off Register */
|
|
|
|
#define BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */
|
2013-03-13 05:32:13 -06:00
|
|
|
|
2013-05-21 05:40:06 -06:00
|
|
|
#define RCAR_MAX_GPIO_PER_BANK 32
|
|
|
|
|
2013-03-13 05:32:13 -06:00
|
|
|
static inline u32 gpio_rcar_read(struct gpio_rcar_priv *p, int offs)
|
|
|
|
{
|
|
|
|
return ioread32(p->base + offs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void gpio_rcar_write(struct gpio_rcar_priv *p, int offs,
|
|
|
|
u32 value)
|
|
|
|
{
|
|
|
|
iowrite32(value, p->base + offs);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void gpio_rcar_modify_bit(struct gpio_rcar_priv *p, int offs,
|
|
|
|
int bit, bool value)
|
|
|
|
{
|
|
|
|
u32 tmp = gpio_rcar_read(p, offs);
|
|
|
|
|
|
|
|
if (value)
|
|
|
|
tmp |= BIT(bit);
|
|
|
|
else
|
|
|
|
tmp &= ~BIT(bit);
|
|
|
|
|
|
|
|
gpio_rcar_write(p, offs, tmp);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void gpio_rcar_irq_disable(struct irq_data *d)
|
|
|
|
{
|
2015-01-12 03:07:59 -07:00
|
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
2015-12-07 06:12:45 -07:00
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(gc);
|
2013-03-13 05:32:13 -06:00
|
|
|
|
|
|
|
gpio_rcar_write(p, INTMSK, ~BIT(irqd_to_hwirq(d)));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void gpio_rcar_irq_enable(struct irq_data *d)
|
|
|
|
{
|
2015-01-12 03:07:59 -07:00
|
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
2015-12-07 06:12:45 -07:00
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(gc);
|
2013-03-13 05:32:13 -06:00
|
|
|
|
|
|
|
gpio_rcar_write(p, MSKCLR, BIT(irqd_to_hwirq(d)));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void gpio_rcar_config_interrupt_input_mode(struct gpio_rcar_priv *p,
|
|
|
|
unsigned int hwirq,
|
|
|
|
bool active_high_rising_edge,
|
2013-05-24 03:47:24 -06:00
|
|
|
bool level_trigger,
|
|
|
|
bool both)
|
2013-03-13 05:32:13 -06:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
/* follow steps in the GPIO documentation for
|
|
|
|
* "Setting Edge-Sensitive Interrupt Input Mode" and
|
|
|
|
* "Setting Level-Sensitive Interrupt Input Mode"
|
|
|
|
*/
|
|
|
|
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
|
|
|
|
|
|
/* Configure postive or negative logic in POSNEG */
|
|
|
|
gpio_rcar_modify_bit(p, POSNEG, hwirq, !active_high_rising_edge);
|
|
|
|
|
|
|
|
/* Configure edge or level trigger in EDGLEVEL */
|
|
|
|
gpio_rcar_modify_bit(p, EDGLEVEL, hwirq, !level_trigger);
|
|
|
|
|
2013-05-24 03:47:24 -06:00
|
|
|
/* Select one edge or both edges in BOTHEDGE */
|
2015-12-04 08:33:52 -07:00
|
|
|
if (p->has_both_edge_trigger)
|
2013-05-24 03:47:24 -06:00
|
|
|
gpio_rcar_modify_bit(p, BOTHEDGE, hwirq, both);
|
|
|
|
|
2013-03-13 05:32:13 -06:00
|
|
|
/* Select "Interrupt Input Mode" in IOINTSEL */
|
|
|
|
gpio_rcar_modify_bit(p, IOINTSEL, hwirq, true);
|
|
|
|
|
|
|
|
/* Write INTCLR in case of edge trigger */
|
|
|
|
if (!level_trigger)
|
|
|
|
gpio_rcar_write(p, INTCLR, BIT(hwirq));
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int gpio_rcar_irq_set_type(struct irq_data *d, unsigned int type)
|
|
|
|
{
|
2015-01-12 03:07:59 -07:00
|
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
2015-12-07 06:12:45 -07:00
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(gc);
|
2013-03-13 05:32:13 -06:00
|
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
|
|
|
|
|
|
|
dev_dbg(&p->pdev->dev, "sense irq = %d, type = %d\n", hwirq, type);
|
|
|
|
|
|
|
|
switch (type & IRQ_TYPE_SENSE_MASK) {
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
2013-05-24 03:47:24 -06:00
|
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, true,
|
|
|
|
false);
|
2013-03-13 05:32:13 -06:00
|
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
2013-05-24 03:47:24 -06:00
|
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, false, true,
|
|
|
|
false);
|
2013-03-13 05:32:13 -06:00
|
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_RISING:
|
2013-05-24 03:47:24 -06:00
|
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
|
|
|
|
false);
|
2013-03-13 05:32:13 -06:00
|
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_FALLING:
|
2013-05-24 03:47:24 -06:00
|
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, false, false,
|
|
|
|
false);
|
|
|
|
break;
|
|
|
|
case IRQ_TYPE_EDGE_BOTH:
|
2015-12-04 08:33:52 -07:00
|
|
|
if (!p->has_both_edge_trigger)
|
2013-05-24 03:47:24 -06:00
|
|
|
return -EINVAL;
|
|
|
|
gpio_rcar_config_interrupt_input_mode(p, hwirq, true, false,
|
|
|
|
true);
|
2013-03-13 05:32:13 -06:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-03-18 12:41:09 -06:00
|
|
|
static int gpio_rcar_irq_set_wake(struct irq_data *d, unsigned int on)
|
|
|
|
{
|
|
|
|
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
|
2015-12-07 06:12:45 -07:00
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(gc);
|
2015-05-21 05:21:37 -06:00
|
|
|
int error;
|
|
|
|
|
|
|
|
if (p->irq_parent) {
|
|
|
|
error = irq_set_irq_wake(p->irq_parent, on);
|
|
|
|
if (error) {
|
|
|
|
dev_dbg(&p->pdev->dev,
|
|
|
|
"irq %u doesn't support irq_set_wake\n",
|
|
|
|
p->irq_parent);
|
|
|
|
p->irq_parent = 0;
|
|
|
|
}
|
|
|
|
}
|
2015-03-18 12:41:09 -06:00
|
|
|
|
|
|
|
if (!p->clk)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (on)
|
|
|
|
clk_enable(p->clk);
|
|
|
|
else
|
|
|
|
clk_disable(p->clk);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-03-13 05:32:13 -06:00
|
|
|
static irqreturn_t gpio_rcar_irq_handler(int irq, void *dev_id)
|
|
|
|
{
|
|
|
|
struct gpio_rcar_priv *p = dev_id;
|
|
|
|
u32 pending;
|
|
|
|
unsigned int offset, irqs_handled = 0;
|
|
|
|
|
2013-11-29 11:04:09 -07:00
|
|
|
while ((pending = gpio_rcar_read(p, INTDT) &
|
|
|
|
gpio_rcar_read(p, INTMSK))) {
|
2013-03-13 05:32:13 -06:00
|
|
|
offset = __ffs(pending);
|
|
|
|
gpio_rcar_write(p, INTCLR, BIT(offset));
|
2017-11-07 11:15:47 -07:00
|
|
|
generic_handle_irq(irq_find_mapping(p->gpio_chip.irq.domain,
|
2015-01-12 03:07:59 -07:00
|
|
|
offset));
|
2013-03-13 05:32:13 -06:00
|
|
|
irqs_handled++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return irqs_handled ? IRQ_HANDLED : IRQ_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void gpio_rcar_config_general_input_output_mode(struct gpio_chip *chip,
|
|
|
|
unsigned int gpio,
|
|
|
|
bool output)
|
|
|
|
{
|
2015-12-07 06:12:45 -07:00
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(chip);
|
2013-03-13 05:32:13 -06:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
/* follow steps in the GPIO documentation for
|
|
|
|
* "Setting General Output Mode" and
|
|
|
|
* "Setting General Input Mode"
|
|
|
|
*/
|
|
|
|
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
|
|
|
|
|
|
/* Configure postive logic in POSNEG */
|
|
|
|
gpio_rcar_modify_bit(p, POSNEG, gpio, false);
|
|
|
|
|
|
|
|
/* Select "General Input/Output Mode" in IOINTSEL */
|
|
|
|
gpio_rcar_modify_bit(p, IOINTSEL, gpio, false);
|
|
|
|
|
|
|
|
/* Select Input Mode or Output Mode in INOUTSEL */
|
|
|
|
gpio_rcar_modify_bit(p, INOUTSEL, gpio, output);
|
|
|
|
|
|
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
|
|
}
|
|
|
|
|
2013-03-09 19:27:00 -07:00
|
|
|
static int gpio_rcar_request(struct gpio_chip *chip, unsigned offset)
|
|
|
|
{
|
gpio: rcar: Fine-grained Runtime PM support
Currently gpio modules are runtime-resumed at probe time. This means the
gpio module will be active all the time (except during system suspend,
if not configured as a wake-up source).
While an R-Car Gen2 gpio module retains pins configured for output at
the requested level while put in standby mode, gpio register cannot be
accessed while suspended. Unfortunately pm_runtime_get_sync() cannot be
called from all contexts where gpio register access is needed. Hence
move the Runtime PM handling from probe/remove time to gpio request/free
time, which is probably the best we can do.
On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during
normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6
for SD-Card CD & WP, gpio7 for keys and regulators).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[Niklas: s/gpio_to_priv(chip)/gpiochip_get_data(chip)/]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-08 10:32:28 -07:00
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(chip);
|
|
|
|
int error;
|
|
|
|
|
|
|
|
error = pm_runtime_get_sync(&p->pdev->dev);
|
|
|
|
if (error < 0)
|
|
|
|
return error;
|
|
|
|
|
2017-09-22 03:02:10 -06:00
|
|
|
error = pinctrl_gpio_request(chip->base + offset);
|
gpio: rcar: Fine-grained Runtime PM support
Currently gpio modules are runtime-resumed at probe time. This means the
gpio module will be active all the time (except during system suspend,
if not configured as a wake-up source).
While an R-Car Gen2 gpio module retains pins configured for output at
the requested level while put in standby mode, gpio register cannot be
accessed while suspended. Unfortunately pm_runtime_get_sync() cannot be
called from all contexts where gpio register access is needed. Hence
move the Runtime PM handling from probe/remove time to gpio request/free
time, which is probably the best we can do.
On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during
normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6
for SD-Card CD & WP, gpio7 for keys and regulators).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[Niklas: s/gpio_to_priv(chip)/gpiochip_get_data(chip)/]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-08 10:32:28 -07:00
|
|
|
if (error)
|
|
|
|
pm_runtime_put(&p->pdev->dev);
|
|
|
|
|
|
|
|
return error;
|
2013-03-09 19:27:00 -07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void gpio_rcar_free(struct gpio_chip *chip, unsigned offset)
|
|
|
|
{
|
gpio: rcar: Fine-grained Runtime PM support
Currently gpio modules are runtime-resumed at probe time. This means the
gpio module will be active all the time (except during system suspend,
if not configured as a wake-up source).
While an R-Car Gen2 gpio module retains pins configured for output at
the requested level while put in standby mode, gpio register cannot be
accessed while suspended. Unfortunately pm_runtime_get_sync() cannot be
called from all contexts where gpio register access is needed. Hence
move the Runtime PM handling from probe/remove time to gpio request/free
time, which is probably the best we can do.
On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during
normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6
for SD-Card CD & WP, gpio7 for keys and regulators).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[Niklas: s/gpio_to_priv(chip)/gpiochip_get_data(chip)/]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-08 10:32:28 -07:00
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(chip);
|
|
|
|
|
2017-09-22 03:02:10 -06:00
|
|
|
pinctrl_gpio_free(chip->base + offset);
|
2013-03-09 19:27:00 -07:00
|
|
|
|
2016-04-12 02:05:22 -06:00
|
|
|
/*
|
|
|
|
* Set the GPIO as an input to ensure that the next GPIO request won't
|
2013-03-09 19:27:00 -07:00
|
|
|
* drive the GPIO pin as an output.
|
|
|
|
*/
|
|
|
|
gpio_rcar_config_general_input_output_mode(chip, offset, false);
|
gpio: rcar: Fine-grained Runtime PM support
Currently gpio modules are runtime-resumed at probe time. This means the
gpio module will be active all the time (except during system suspend,
if not configured as a wake-up source).
While an R-Car Gen2 gpio module retains pins configured for output at
the requested level while put in standby mode, gpio register cannot be
accessed while suspended. Unfortunately pm_runtime_get_sync() cannot be
called from all contexts where gpio register access is needed. Hence
move the Runtime PM handling from probe/remove time to gpio request/free
time, which is probably the best we can do.
On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during
normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6
for SD-Card CD & WP, gpio7 for keys and regulators).
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[Niklas: s/gpio_to_priv(chip)/gpiochip_get_data(chip)/]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-08 10:32:28 -07:00
|
|
|
|
|
|
|
pm_runtime_put(&p->pdev->dev);
|
2013-03-09 19:27:00 -07:00
|
|
|
}
|
|
|
|
|
2013-03-13 05:32:13 -06:00
|
|
|
static int gpio_rcar_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
|
|
{
|
|
|
|
gpio_rcar_config_general_input_output_mode(chip, offset, false);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int gpio_rcar_get(struct gpio_chip *chip, unsigned offset)
|
|
|
|
{
|
2013-06-16 17:41:52 -06:00
|
|
|
u32 bit = BIT(offset);
|
|
|
|
|
|
|
|
/* testing on r8a7790 shows that INDT does not show correct pin state
|
|
|
|
* when configured as output, so use OUTDT in case of output pins */
|
2015-12-07 06:12:45 -07:00
|
|
|
if (gpio_rcar_read(gpiochip_get_data(chip), INOUTSEL) & bit)
|
|
|
|
return !!(gpio_rcar_read(gpiochip_get_data(chip), OUTDT) & bit);
|
2013-06-16 17:41:52 -06:00
|
|
|
else
|
2015-12-07 06:12:45 -07:00
|
|
|
return !!(gpio_rcar_read(gpiochip_get_data(chip), INDT) & bit);
|
2013-03-13 05:32:13 -06:00
|
|
|
}
|
|
|
|
|
|
|
|
static void gpio_rcar_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
|
|
{
|
2015-12-07 06:12:45 -07:00
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(chip);
|
2013-03-13 05:32:13 -06:00
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
|
|
gpio_rcar_modify_bit(p, OUTDT, offset, value);
|
|
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
|
|
}
|
|
|
|
|
2016-03-14 09:21:44 -06:00
|
|
|
static void gpio_rcar_set_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
|
|
unsigned long *bits)
|
|
|
|
{
|
|
|
|
struct gpio_rcar_priv *p = gpiochip_get_data(chip);
|
|
|
|
unsigned long flags;
|
|
|
|
u32 val, bankmask;
|
|
|
|
|
|
|
|
bankmask = mask[0] & GENMASK(chip->ngpio - 1, 0);
|
|
|
|
if (!bankmask)
|
|
|
|
return;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&p->lock, flags);
|
|
|
|
val = gpio_rcar_read(p, OUTDT);
|
|
|
|
val &= ~bankmask;
|
|
|
|
val |= (bankmask & bits[0]);
|
|
|
|
gpio_rcar_write(p, OUTDT, val);
|
|
|
|
spin_unlock_irqrestore(&p->lock, flags);
|
|
|
|
}
|
|
|
|
|
2013-03-13 05:32:13 -06:00
|
|
|
static int gpio_rcar_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
|
|
int value)
|
|
|
|
{
|
|
|
|
/* write GPIO value to output before selecting output mode of pin */
|
|
|
|
gpio_rcar_set(chip, offset, value);
|
|
|
|
gpio_rcar_config_general_input_output_mode(chip, offset, true);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-11-29 06:48:00 -07:00
|
|
|
struct gpio_rcar_info {
|
|
|
|
bool has_both_edge_trigger;
|
2015-12-04 08:33:53 -07:00
|
|
|
bool needs_clk;
|
2013-11-29 06:48:00 -07:00
|
|
|
};
|
|
|
|
|
2014-11-07 04:54:08 -07:00
|
|
|
static const struct gpio_rcar_info gpio_rcar_info_gen1 = {
|
|
|
|
.has_both_edge_trigger = false,
|
2015-12-04 08:33:53 -07:00
|
|
|
.needs_clk = false,
|
2014-11-07 04:54:08 -07:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct gpio_rcar_info gpio_rcar_info_gen2 = {
|
|
|
|
.has_both_edge_trigger = true,
|
2015-12-04 08:33:53 -07:00
|
|
|
.needs_clk = true,
|
2014-11-07 04:54:08 -07:00
|
|
|
};
|
|
|
|
|
2013-11-29 06:48:00 -07:00
|
|
|
static const struct of_device_id gpio_rcar_of_table[] = {
|
|
|
|
{
|
2017-06-21 08:27:09 -06:00
|
|
|
.compatible = "renesas,gpio-r8a7743",
|
|
|
|
/* RZ/G1 GPIO is identical to R-Car Gen2. */
|
|
|
|
.data = &gpio_rcar_info_gen2,
|
|
|
|
}, {
|
2013-11-29 06:48:00 -07:00
|
|
|
.compatible = "renesas,gpio-r8a7790",
|
2014-11-07 04:54:08 -07:00
|
|
|
.data = &gpio_rcar_info_gen2,
|
2013-11-29 06:48:00 -07:00
|
|
|
}, {
|
|
|
|
.compatible = "renesas,gpio-r8a7791",
|
2014-11-07 04:54:08 -07:00
|
|
|
.data = &gpio_rcar_info_gen2,
|
2016-07-07 08:11:45 -06:00
|
|
|
}, {
|
|
|
|
.compatible = "renesas,gpio-r8a7792",
|
|
|
|
.data = &gpio_rcar_info_gen2,
|
2014-11-07 04:54:08 -07:00
|
|
|
}, {
|
|
|
|
.compatible = "renesas,gpio-r8a7793",
|
|
|
|
.data = &gpio_rcar_info_gen2,
|
|
|
|
}, {
|
|
|
|
.compatible = "renesas,gpio-r8a7794",
|
|
|
|
.data = &gpio_rcar_info_gen2,
|
2015-07-21 03:08:50 -06:00
|
|
|
}, {
|
|
|
|
.compatible = "renesas,gpio-r8a7795",
|
|
|
|
/* Gen3 GPIO is identical to Gen2. */
|
|
|
|
.data = &gpio_rcar_info_gen2,
|
2016-09-06 04:35:39 -06:00
|
|
|
}, {
|
|
|
|
.compatible = "renesas,gpio-r8a7796",
|
|
|
|
/* Gen3 GPIO is identical to Gen2. */
|
|
|
|
.data = &gpio_rcar_info_gen2,
|
2017-07-11 06:38:30 -06:00
|
|
|
}, {
|
|
|
|
.compatible = "renesas,rcar-gen1-gpio",
|
|
|
|
.data = &gpio_rcar_info_gen1,
|
|
|
|
}, {
|
|
|
|
.compatible = "renesas,rcar-gen2-gpio",
|
|
|
|
.data = &gpio_rcar_info_gen2,
|
|
|
|
}, {
|
|
|
|
.compatible = "renesas,rcar-gen3-gpio",
|
|
|
|
/* Gen3 GPIO is identical to Gen2. */
|
|
|
|
.data = &gpio_rcar_info_gen2,
|
2013-11-29 06:48:00 -07:00
|
|
|
}, {
|
|
|
|
.compatible = "renesas,gpio-rcar",
|
2014-11-07 04:54:08 -07:00
|
|
|
.data = &gpio_rcar_info_gen1,
|
2013-11-29 06:48:00 -07:00
|
|
|
}, {
|
|
|
|
/* Terminator */
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
MODULE_DEVICE_TABLE(of, gpio_rcar_of_table);
|
|
|
|
|
2015-12-04 08:33:52 -07:00
|
|
|
static int gpio_rcar_parse_dt(struct gpio_rcar_priv *p, unsigned int *npins)
|
2013-05-21 05:40:06 -06:00
|
|
|
{
|
|
|
|
struct device_node *np = p->pdev->dev.of_node;
|
2015-12-04 08:33:52 -07:00
|
|
|
const struct gpio_rcar_info *info;
|
2013-05-21 05:40:06 -06:00
|
|
|
struct of_phandle_args args;
|
|
|
|
int ret;
|
|
|
|
|
2017-10-04 06:16:16 -06:00
|
|
|
info = of_device_get_match_data(&p->pdev->dev);
|
2013-11-29 06:48:00 -07:00
|
|
|
|
2015-12-04 08:33:52 -07:00
|
|
|
ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, 0, &args);
|
|
|
|
*npins = ret == 0 ? args.args[2] : RCAR_MAX_GPIO_PER_BANK;
|
|
|
|
p->has_both_edge_trigger = info->has_both_edge_trigger;
|
2015-12-04 08:33:53 -07:00
|
|
|
p->needs_clk = info->needs_clk;
|
2013-11-29 06:48:00 -07:00
|
|
|
|
2015-12-04 08:33:52 -07:00
|
|
|
if (*npins == 0 || *npins > RCAR_MAX_GPIO_PER_BANK) {
|
2013-05-21 05:40:06 -06:00
|
|
|
dev_warn(&p->pdev->dev,
|
2015-12-04 08:33:52 -07:00
|
|
|
"Invalid number of gpio lines %u, using %u\n", *npins,
|
|
|
|
RCAR_MAX_GPIO_PER_BANK);
|
|
|
|
*npins = RCAR_MAX_GPIO_PER_BANK;
|
2013-05-21 05:40:06 -06:00
|
|
|
}
|
2013-11-29 06:48:00 -07:00
|
|
|
|
|
|
|
return 0;
|
2013-05-21 05:40:06 -06:00
|
|
|
}
|
|
|
|
|
2013-03-13 05:32:13 -06:00
|
|
|
static int gpio_rcar_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct gpio_rcar_priv *p;
|
|
|
|
struct resource *io, *irq;
|
|
|
|
struct gpio_chip *gpio_chip;
|
|
|
|
struct irq_chip *irq_chip;
|
2014-03-27 14:47:36 -06:00
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
const char *name = dev_name(dev);
|
2015-12-04 08:33:52 -07:00
|
|
|
unsigned int npins;
|
2013-03-13 05:32:13 -06:00
|
|
|
int ret;
|
|
|
|
|
2014-03-27 14:47:36 -06:00
|
|
|
p = devm_kzalloc(dev, sizeof(*p), GFP_KERNEL);
|
2015-01-12 03:07:58 -07:00
|
|
|
if (!p)
|
|
|
|
return -ENOMEM;
|
2013-03-13 05:32:13 -06:00
|
|
|
|
|
|
|
p->pdev = pdev;
|
|
|
|
spin_lock_init(&p->lock);
|
|
|
|
|
2015-12-04 08:33:52 -07:00
|
|
|
/* Get device configuration from DT node */
|
|
|
|
ret = gpio_rcar_parse_dt(p, &npins);
|
2013-11-29 06:48:00 -07:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
2013-05-21 05:40:06 -06:00
|
|
|
|
|
|
|
platform_set_drvdata(pdev, p);
|
|
|
|
|
2015-03-18 12:41:09 -06:00
|
|
|
p->clk = devm_clk_get(dev, NULL);
|
|
|
|
if (IS_ERR(p->clk)) {
|
2015-12-04 08:33:53 -07:00
|
|
|
if (p->needs_clk) {
|
|
|
|
dev_err(dev, "unable to get clock\n");
|
|
|
|
ret = PTR_ERR(p->clk);
|
|
|
|
goto err0;
|
|
|
|
}
|
2015-03-18 12:41:09 -06:00
|
|
|
p->clk = NULL;
|
|
|
|
}
|
|
|
|
|
2014-04-14 12:33:13 -06:00
|
|
|
pm_runtime_enable(dev);
|
|
|
|
|
2013-03-13 05:32:13 -06:00
|
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
2017-10-12 15:08:14 -06:00
|
|
|
if (!irq) {
|
|
|
|
dev_err(dev, "missing IRQ\n");
|
2013-03-13 05:32:13 -06:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto err0;
|
|
|
|
}
|
|
|
|
|
2017-10-12 15:08:14 -06:00
|
|
|
io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
p->base = devm_ioremap_resource(dev, io);
|
|
|
|
if (IS_ERR(p->base)) {
|
|
|
|
ret = PTR_ERR(p->base);
|
2013-03-13 05:32:13 -06:00
|
|
|
goto err0;
|
|
|
|
}
|
|
|
|
|
|
|
|
gpio_chip = &p->gpio_chip;
|
2013-03-09 19:27:00 -07:00
|
|
|
gpio_chip->request = gpio_rcar_request;
|
|
|
|
gpio_chip->free = gpio_rcar_free;
|
2013-03-13 05:32:13 -06:00
|
|
|
gpio_chip->direction_input = gpio_rcar_direction_input;
|
|
|
|
gpio_chip->get = gpio_rcar_get;
|
|
|
|
gpio_chip->direction_output = gpio_rcar_direction_output;
|
|
|
|
gpio_chip->set = gpio_rcar_set;
|
2016-03-14 09:21:44 -06:00
|
|
|
gpio_chip->set_multiple = gpio_rcar_set_multiple;
|
2013-03-13 05:32:13 -06:00
|
|
|
gpio_chip->label = name;
|
2015-11-04 01:56:26 -07:00
|
|
|
gpio_chip->parent = dev;
|
2013-03-13 05:32:13 -06:00
|
|
|
gpio_chip->owner = THIS_MODULE;
|
2015-12-04 08:33:52 -07:00
|
|
|
gpio_chip->base = -1;
|
|
|
|
gpio_chip->ngpio = npins;
|
2013-03-13 05:32:13 -06:00
|
|
|
|
|
|
|
irq_chip = &p->irq_chip;
|
|
|
|
irq_chip->name = name;
|
2016-12-08 10:32:27 -07:00
|
|
|
irq_chip->parent_device = dev;
|
2013-03-13 05:32:13 -06:00
|
|
|
irq_chip->irq_mask = gpio_rcar_irq_disable;
|
|
|
|
irq_chip->irq_unmask = gpio_rcar_irq_enable;
|
|
|
|
irq_chip->irq_set_type = gpio_rcar_irq_set_type;
|
2015-03-18 12:41:09 -06:00
|
|
|
irq_chip->irq_set_wake = gpio_rcar_irq_set_wake;
|
|
|
|
irq_chip->flags = IRQCHIP_SET_TYPE_MASKED | IRQCHIP_MASK_ON_SUSPEND;
|
2013-03-13 05:32:13 -06:00
|
|
|
|
2015-12-07 06:12:45 -07:00
|
|
|
ret = gpiochip_add_data(gpio_chip, p);
|
2015-01-12 03:07:59 -07:00
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "failed to add GPIO controller\n");
|
2013-11-07 00:56:51 -07:00
|
|
|
goto err0;
|
2013-03-13 05:32:13 -06:00
|
|
|
}
|
|
|
|
|
2015-12-04 08:33:52 -07:00
|
|
|
ret = gpiochip_irqchip_add(gpio_chip, irq_chip, 0, handle_level_irq,
|
|
|
|
IRQ_TYPE_NONE);
|
2015-01-12 03:07:59 -07:00
|
|
|
if (ret) {
|
|
|
|
dev_err(dev, "cannot add irqchip\n");
|
|
|
|
goto err1;
|
|
|
|
}
|
|
|
|
|
2015-03-18 12:41:09 -06:00
|
|
|
p->irq_parent = irq->start;
|
2014-03-27 14:47:36 -06:00
|
|
|
if (devm_request_irq(dev, irq->start, gpio_rcar_irq_handler,
|
|
|
|
IRQF_SHARED, name, p)) {
|
|
|
|
dev_err(dev, "failed to request IRQ\n");
|
2013-03-13 05:32:13 -06:00
|
|
|
ret = -ENOENT;
|
|
|
|
goto err1;
|
|
|
|
}
|
|
|
|
|
2015-12-04 08:33:52 -07:00
|
|
|
dev_info(dev, "driving %d GPIOs\n", npins);
|
2013-03-09 19:27:00 -07:00
|
|
|
|
2013-03-13 05:32:13 -06:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
err1:
|
2015-03-18 12:41:07 -06:00
|
|
|
gpiochip_remove(gpio_chip);
|
2013-03-13 05:32:13 -06:00
|
|
|
err0:
|
2014-04-14 12:33:13 -06:00
|
|
|
pm_runtime_disable(dev);
|
2013-03-13 05:32:13 -06:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int gpio_rcar_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct gpio_rcar_priv *p = platform_get_drvdata(pdev);
|
|
|
|
|
2014-07-12 14:30:12 -06:00
|
|
|
gpiochip_remove(&p->gpio_chip);
|
2013-03-13 05:32:13 -06:00
|
|
|
|
2014-04-14 12:33:13 -06:00
|
|
|
pm_runtime_disable(&pdev->dev);
|
2013-03-13 05:32:13 -06:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver gpio_rcar_device_driver = {
|
|
|
|
.probe = gpio_rcar_probe,
|
|
|
|
.remove = gpio_rcar_remove,
|
|
|
|
.driver = {
|
|
|
|
.name = "gpio_rcar",
|
2013-05-21 05:40:06 -06:00
|
|
|
.of_match_table = of_match_ptr(gpio_rcar_of_table),
|
2013-03-13 05:32:13 -06:00
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(gpio_rcar_device_driver);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Magnus Damm");
|
|
|
|
MODULE_DESCRIPTION("Renesas R-Car GPIO Driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|