kernel-fxtec-pro1x/drivers/acpi/osl.c

1390 lines
33 KiB
C
Raw Normal View History

/*
* acpi_osl.c - OS-dependent functions ($Revision: 83 $)
*
* Copyright (C) 2000 Andrew Henroid
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (c) 2008 Intel Corporation
* Author: Matthew Wilcox <willy@linux.intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kmod.h>
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
#include <linux/acpi.h>
#include <linux/efi.h>
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
#include <linux/ioport.h>
#include <linux/list.h>
#include <linux/jiffies.h>
#include <linux/semaphore.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/processor.h>
#define _COMPONENT ACPI_OS_SERVICES
ACPI_MODULE_NAME("osl");
#define PREFIX "ACPI: "
struct acpi_os_dpc {
acpi_osd_exec_callback function;
void *context;
2006-11-22 07:55:48 -07:00
struct work_struct work;
};
#ifdef CONFIG_ACPI_CUSTOM_DSDT
#include CONFIG_ACPI_CUSTOM_DSDT_FILE
#endif
#ifdef ENABLE_DEBUGGER
#include <linux/kdb.h>
/* stuff for debugger support */
int acpi_in_debugger;
EXPORT_SYMBOL(acpi_in_debugger);
extern char line_buf[80];
#endif /*ENABLE_DEBUGGER */
static unsigned int acpi_irq_irq;
static acpi_osd_handler acpi_irq_handler;
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
ACPI: created a dedicated workqueue for notify() execution HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 21:31:03 -06:00
static struct workqueue_struct *kacpi_notify_wq;
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
struct acpi_res_list {
resource_size_t start;
resource_size_t end;
acpi_adr_space_type resource_type; /* IO port, System memory, ...*/
char name[5]; /* only can have a length of 4 chars, make use of this
one instead of res->name, no need to kalloc then */
struct list_head resource_list;
};
static LIST_HEAD(resource_list_head);
static DEFINE_SPINLOCK(acpi_res_lock);
#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
static char osi_additional_string[OSI_STRING_LENGTH_MAX];
/*
* The story of _OSI(Linux)
*
* From pre-history through Linux-2.6.22,
* Linux responded TRUE upon a BIOS OSI(Linux) query.
*
* Unfortunately, reference BIOS writers got wind of this
* and put OSI(Linux) in their example code, quickly exposing
* this string as ill-conceived and opening the door to
* an un-bounded number of BIOS incompatibilities.
*
* For example, OSI(Linux) was used on resume to re-POST a
* video card on one system, because Linux at that time
* could not do a speedy restore in its native driver.
* But then upon gaining quick native restore capability,
* Linux has no way to tell the BIOS to skip the time-consuming
* POST -- putting Linux at a permanent performance disadvantage.
* On another system, the BIOS writer used OSI(Linux)
* to infer native OS support for IPMI! On other systems,
* OSI(Linux) simply got in the way of Linux claiming to
* be compatible with other operating systems, exposing
* BIOS issues such as skipped device initialization.
*
* So "Linux" turned out to be a really poor chose of
* OSI string, and from Linux-2.6.23 onward we respond FALSE.
*
* BIOS writers should NOT query _OSI(Linux) on future systems.
* Linux will complain on the console when it sees it, and return FALSE.
* To get Linux to return TRUE for your system will require
* a kernel source update to add a DMI entry,
* or boot with "acpi_osi=Linux"
*/
static struct osi_linux {
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
unsigned int known:1;
} osi_linux = { 0, 0, 0, 0};
static void __init acpi_request_region (struct acpi_generic_address *addr,
unsigned int length, char *desc)
{
struct resource *res;
if (!addr->address || !length)
return;
if (addr->space_id == ACPI_ADR_SPACE_SYSTEM_IO)
res = request_region(addr->address, length, desc);
else if (addr->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
res = request_mem_region(addr->address, length, desc);
}
static int __init acpi_reserve_resources(void)
{
acpi_request_region(&acpi_gbl_FADT.xpm1a_event_block, acpi_gbl_FADT.pm1_event_length,
"ACPI PM1a_EVT_BLK");
acpi_request_region(&acpi_gbl_FADT.xpm1b_event_block, acpi_gbl_FADT.pm1_event_length,
"ACPI PM1b_EVT_BLK");
acpi_request_region(&acpi_gbl_FADT.xpm1a_control_block, acpi_gbl_FADT.pm1_control_length,
"ACPI PM1a_CNT_BLK");
acpi_request_region(&acpi_gbl_FADT.xpm1b_control_block, acpi_gbl_FADT.pm1_control_length,
"ACPI PM1b_CNT_BLK");
if (acpi_gbl_FADT.pm_timer_length == 4)
acpi_request_region(&acpi_gbl_FADT.xpm_timer_block, 4, "ACPI PM_TMR");
acpi_request_region(&acpi_gbl_FADT.xpm2_control_block, acpi_gbl_FADT.pm2_control_length,
"ACPI PM2_CNT_BLK");
/* Length of GPE blocks must be a non-negative multiple of 2 */
if (!(acpi_gbl_FADT.gpe0_block_length & 0x1))
acpi_request_region(&acpi_gbl_FADT.xgpe0_block,
acpi_gbl_FADT.gpe0_block_length, "ACPI GPE0_BLK");
if (!(acpi_gbl_FADT.gpe1_block_length & 0x1))
acpi_request_region(&acpi_gbl_FADT.xgpe1_block,
acpi_gbl_FADT.gpe1_block_length, "ACPI GPE1_BLK");
return 0;
}
device_initcall(acpi_reserve_resources);
acpi_status __init acpi_os_initialize(void)
{
return AE_OK;
}
acpi_status acpi_os_initialize1(void)
{
kacpid_wq = create_singlethread_workqueue("kacpid");
ACPI: created a dedicated workqueue for notify() execution HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 21:31:03 -06:00
kacpi_notify_wq = create_singlethread_workqueue("kacpi_notify");
BUG_ON(!kacpid_wq);
ACPI: created a dedicated workqueue for notify() execution HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 21:31:03 -06:00
BUG_ON(!kacpi_notify_wq);
return AE_OK;
}
acpi_status acpi_os_terminate(void)
{
if (acpi_irq_handler) {
acpi_os_remove_interrupt_handler(acpi_irq_irq,
acpi_irq_handler);
}
destroy_workqueue(kacpid_wq);
ACPI: created a dedicated workqueue for notify() execution HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 21:31:03 -06:00
destroy_workqueue(kacpi_notify_wq);
return AE_OK;
}
void acpi_os_printf(const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
acpi_os_vprintf(fmt, args);
va_end(args);
}
void acpi_os_vprintf(const char *fmt, va_list args)
{
static char buffer[512];
vsprintf(buffer, fmt, args);
#ifdef ENABLE_DEBUGGER
if (acpi_in_debugger) {
kdb_printf("%s", buffer);
} else {
printk(KERN_CONT "%s", buffer);
}
#else
printk(KERN_CONT "%s", buffer);
#endif
}
acpi_physical_address __init acpi_os_get_root_pointer(void)
{
if (efi_enabled) {
if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
return efi.acpi20;
else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
return efi.acpi;
else {
printk(KERN_ERR PREFIX
"System description tables not found\n");
return 0;
}
} else {
acpi_physical_address pa = 0;
acpi_find_root_pointer(&pa);
return pa;
}
}
void __iomem *__init_refok
acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
{
if (phys > ULONG_MAX) {
printk(KERN_ERR PREFIX "Cannot map memory that high\n");
return NULL;
}
if (acpi_gbl_permanent_mmap)
/*
* ioremap checks to ensure this is in reserved space
*/
return ioremap((unsigned long)phys, size);
else
return __acpi_map_table((unsigned long)phys, size);
}
EXPORT_SYMBOL_GPL(acpi_os_map_memory);
void __ref acpi_os_unmap_memory(void __iomem *virt, acpi_size size)
{
if (acpi_gbl_permanent_mmap)
iounmap(virt);
else
__acpi_unmap_table(virt, size);
}
EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
void __init early_acpi_os_unmap_memory(void __iomem *virt, acpi_size size)
{
if (!acpi_gbl_permanent_mmap)
__acpi_unmap_table(virt, size);
}
#ifdef ACPI_FUTURE_USAGE
acpi_status
acpi_os_get_physical_address(void *virt, acpi_physical_address * phys)
{
if (!phys || !virt)
return AE_BAD_PARAMETER;
*phys = virt_to_phys(virt);
return AE_OK;
}
#endif
#define ACPI_MAX_OVERRIDE_LEN 100
static char acpi_os_name[ACPI_MAX_OVERRIDE_LEN];
acpi_status
acpi_os_predefined_override(const struct acpi_predefined_names *init_val,
acpi_string * new_val)
{
if (!init_val || !new_val)
return AE_BAD_PARAMETER;
*new_val = NULL;
if (!memcmp(init_val->name, "_OS_", 4) && strlen(acpi_os_name)) {
printk(KERN_INFO PREFIX "Overriding _OS definition to '%s'\n",
acpi_os_name);
*new_val = acpi_os_name;
}
return AE_OK;
}
acpi_status
acpi_os_table_override(struct acpi_table_header * existing_table,
struct acpi_table_header ** new_table)
{
if (!existing_table || !new_table)
return AE_BAD_PARAMETER;
*new_table = NULL;
#ifdef CONFIG_ACPI_CUSTOM_DSDT
if (strncmp(existing_table->signature, "DSDT", 4) == 0)
*new_table = (struct acpi_table_header *)AmlCode;
#endif
if (*new_table != NULL) {
printk(KERN_WARNING PREFIX "Override [%4.4s-%8.8s], "
"this is unsafe: tainting kernel\n",
existing_table->signature,
existing_table->oem_table_id);
add_taint(TAINT_OVERRIDDEN_ACPI_TABLE);
}
return AE_OK;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 07:55:46 -06:00
static irqreturn_t acpi_irq(int irq, void *dev_id)
{
u32 handled;
handled = (*acpi_irq_handler) (acpi_irq_context);
if (handled) {
acpi_irq_handled++;
return IRQ_HANDLED;
} else
return IRQ_NONE;
}
acpi_status
acpi_os_install_interrupt_handler(u32 gsi, acpi_osd_handler handler,
void *context)
{
unsigned int irq;
acpi_irq_stats_init();
/*
* Ignore the GSI from the core, and use the value in our copy of the
* FADT. It may not be the same if an interrupt source override exists
* for the SCI.
*/
gsi = acpi_gbl_FADT.sci_interrupt;
if (acpi_gsi_to_irq(gsi, &irq) < 0) {
printk(KERN_ERR PREFIX "SCI (ACPI GSI %d) not registered\n",
gsi);
return AE_OK;
}
acpi_irq_handler = handler;
acpi_irq_context = context;
if (request_irq(irq, acpi_irq, IRQF_SHARED, "acpi", acpi_irq)) {
printk(KERN_ERR PREFIX "SCI (IRQ%d) allocation failed\n", irq);
return AE_NOT_ACQUIRED;
}
acpi_irq_irq = irq;
return AE_OK;
}
acpi_status acpi_os_remove_interrupt_handler(u32 irq, acpi_osd_handler handler)
{
if (irq) {
free_irq(irq, acpi_irq);
acpi_irq_handler = NULL;
acpi_irq_irq = 0;
}
return AE_OK;
}
/*
* Running in interpreter thread context, safe to sleep
*/
void acpi_os_sleep(acpi_integer ms)
{
schedule_timeout_interruptible(msecs_to_jiffies(ms));
}
void acpi_os_stall(u32 us)
{
while (us) {
u32 delay = 1000;
if (delay > us)
delay = us;
udelay(delay);
touch_nmi_watchdog();
us -= delay;
}
}
/*
* Support ACPI 3.0 AML Timer operand
* Returns 64-bit free-running, monotonically increasing timer
* with 100ns granularity
*/
u64 acpi_os_get_timer(void)
{
static u64 t;
#ifdef CONFIG_HPET
/* TBD: use HPET if available */
#endif
#ifdef CONFIG_X86_PM_TIMER
/* TBD: default to PM timer if HPET was not available */
#endif
if (!t)
printk(KERN_ERR PREFIX "acpi_os_get_timer() TBD\n");
return ++t;
}
acpi_status acpi_os_read_port(acpi_io_address port, u32 * value, u32 width)
{
u32 dummy;
if (!value)
value = &dummy;
*value = 0;
if (width <= 8) {
*(u8 *) value = inb(port);
} else if (width <= 16) {
*(u16 *) value = inw(port);
} else if (width <= 32) {
*(u32 *) value = inl(port);
} else {
BUG();
}
return AE_OK;
}
EXPORT_SYMBOL(acpi_os_read_port);
acpi_status acpi_os_write_port(acpi_io_address port, u32 value, u32 width)
{
if (width <= 8) {
outb(value, port);
} else if (width <= 16) {
outw(value, port);
} else if (width <= 32) {
outl(value, port);
} else {
BUG();
}
return AE_OK;
}
EXPORT_SYMBOL(acpi_os_write_port);
acpi_status
acpi_os_read_memory(acpi_physical_address phys_addr, u32 * value, u32 width)
{
u32 dummy;
void __iomem *virt_addr;
virt_addr = ioremap(phys_addr, width);
if (!value)
value = &dummy;
switch (width) {
case 8:
*(u8 *) value = readb(virt_addr);
break;
case 16:
*(u16 *) value = readw(virt_addr);
break;
case 32:
*(u32 *) value = readl(virt_addr);
break;
default:
BUG();
}
iounmap(virt_addr);
return AE_OK;
}
acpi_status
acpi_os_write_memory(acpi_physical_address phys_addr, u32 value, u32 width)
{
void __iomem *virt_addr;
virt_addr = ioremap(phys_addr, width);
switch (width) {
case 8:
writeb(value, virt_addr);
break;
case 16:
writew(value, virt_addr);
break;
case 32:
writel(value, virt_addr);
break;
default:
BUG();
}
iounmap(virt_addr);
return AE_OK;
}
acpi_status
acpi_os_read_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
u32 *value, u32 width)
{
int result, size;
if (!value)
return AE_BAD_PARAMETER;
switch (width) {
case 8:
size = 1;
break;
case 16:
size = 2;
break;
case 32:
size = 4;
break;
default:
return AE_ERROR;
}
result = raw_pci_read(pci_id->segment, pci_id->bus,
PCI_DEVFN(pci_id->device, pci_id->function),
reg, size, value);
return (result ? AE_ERROR : AE_OK);
}
acpi_status
acpi_os_write_pci_configuration(struct acpi_pci_id * pci_id, u32 reg,
acpi_integer value, u32 width)
{
int result, size;
switch (width) {
case 8:
size = 1;
break;
case 16:
size = 2;
break;
case 32:
size = 4;
break;
default:
return AE_ERROR;
}
result = raw_pci_write(pci_id->segment, pci_id->bus,
PCI_DEVFN(pci_id->device, pci_id->function),
reg, size, value);
return (result ? AE_ERROR : AE_OK);
}
/* TODO: Change code to take advantage of driver model more */
static void acpi_os_derive_pci_id_2(acpi_handle rhandle, /* upper bound */
acpi_handle chandle, /* current node */
struct acpi_pci_id **id,
int *is_bridge, u8 * bus_number)
{
acpi_handle handle;
struct acpi_pci_id *pci_id = *id;
acpi_status status;
unsigned long long temp;
acpi_object_type type;
acpi_get_parent(chandle, &handle);
if (handle != rhandle) {
acpi_os_derive_pci_id_2(rhandle, handle, &pci_id, is_bridge,
bus_number);
status = acpi_get_type(handle, &type);
if ((ACPI_FAILURE(status)) || (type != ACPI_TYPE_DEVICE))
return;
status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL,
&temp);
if (ACPI_SUCCESS(status)) {
u32 val;
pci_id->device = ACPI_HIWORD(ACPI_LODWORD(temp));
pci_id->function = ACPI_LOWORD(ACPI_LODWORD(temp));
if (*is_bridge)
pci_id->bus = *bus_number;
/* any nicer way to get bus number of bridge ? */
status =
acpi_os_read_pci_configuration(pci_id, 0x0e, &val,
8);
if (ACPI_SUCCESS(status)
&& ((val & 0x7f) == 1 || (val & 0x7f) == 2)) {
status =
acpi_os_read_pci_configuration(pci_id, 0x18,
&val, 8);
if (!ACPI_SUCCESS(status)) {
/* Certainly broken... FIX ME */
return;
}
*is_bridge = 1;
pci_id->bus = val;
status =
acpi_os_read_pci_configuration(pci_id, 0x19,
&val, 8);
if (ACPI_SUCCESS(status)) {
*bus_number = val;
}
} else
*is_bridge = 0;
}
}
}
void acpi_os_derive_pci_id(acpi_handle rhandle, /* upper bound */
acpi_handle chandle, /* current node */
struct acpi_pci_id **id)
{
int is_bridge = 1;
u8 bus_number = (*id)->bus;
acpi_os_derive_pci_id_2(rhandle, chandle, id, &is_bridge, &bus_number);
}
2006-11-22 07:55:48 -07:00
static void acpi_os_execute_deferred(struct work_struct *work)
ACPI: created a dedicated workqueue for notify() execution HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 21:31:03 -06:00
{
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
if (!dpc) {
printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
return;
}
dpc->function(dpc->context);
kfree(dpc);
return;
}
static void acpi_os_execute_hp_deferred(struct work_struct *work)
{
struct acpi_os_dpc *dpc = container_of(work, struct acpi_os_dpc, work);
if (!dpc) {
printk(KERN_ERR PREFIX "Invalid (NULL) context\n");
return;
}
acpi_os_wait_events_complete(NULL);
dpc->function(dpc->context);
kfree(dpc);
return;
}
/*******************************************************************************
*
* FUNCTION: acpi_os_execute
*
* PARAMETERS: Type - Type of the callback
* Function - Function to be executed
* Context - Function parameters
*
* RETURN: Status
*
* DESCRIPTION: Depending on type, either queues function for deferred execution or
* immediately executes function on a separate thread.
*
******************************************************************************/
static acpi_status __acpi_os_execute(acpi_execute_type type,
acpi_osd_exec_callback function, void *context, int hp)
{
acpi_status status = AE_OK;
struct acpi_os_dpc *dpc;
struct workqueue_struct *queue;
int ret;
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Scheduling function [%p(%p)] for deferred execution.\n",
function, context));
if (!function)
ACPI: created a dedicated workqueue for notify() execution HP nx6125/nx6325/... machines have a _GPE handler with an infinite loop sending Notify() events to different ACPI subsystems. Notify handler in ACPI driver is a C-routine, which may call ACPI interpreter again to get access to some ACPI variables (acpi_evaluate_xxx). On these HP machines such an evaluation changes state of some variable and lets the loop above break. In the current ACPI implementation Notify requests are being deferred to the same kacpid workqueue on which the above GPE handler with infinite loop is executing. Thus we have a deadlock -- loop will continue to spin, sending notify events, and at the same time preventing these notify events from being run on a workqueue. All notify events are deferred, thus we see increase in memory consumption noticed by author of the thread. Also as GPE handling is bloked, machines overheat. Eventually by external poll of the same acpi_evaluate, kacpid is released and all the queued notify events are free to run, thus 100% cpu utilization by kacpid for several seconds or more. To prevent all these horrors it's needed to not put notify events to kacpid workqueue by either executing them immediately or putting them on some other thread. It's dangerous to execute notify events in place, as it will put several ACPI interpreter stacks on top of each other (at least 4 in case of nx6125), thus causing kernel stack overflow. First attempt to create a new thread was done by Peter Wainwright He created a bunch of threads, which were stealing work from a kacpid workqueue. This patch appeared in 2.6.15 kernel shipped with Ubuntu 6.06 LTS. Second attempt was done by me, I created a new thread for each Notify event. This worked OK on HP nx machines, but broke Linus' Compaq n620c, by producing threads with a speed what they stopped the machine completely. Thus this patch was reverted from 18-rc2 as I remember. I re-made the patch to create second workqueue just for notify events, thus hopping it will not break Linus' machine. Patch was tested on the same HP nx machines in #5534 and #7122, but I did not received reply from Linus on a test patch sent to him. Patch went to 19-rc and was rejected with much fanfare again. There was 4th patch, which inserted schedule_timeout(1) into deferred execution of kacpid, if we had any notify requests pending, but Linus decided that it was too complex (involved either changes to workqueue to see if it's empty or atomic inc/dec). Now you see last variant which adds yield() to every GPE execution. http://bugzilla.kernel.org/show_bug.cgi?id=5534 http://bugzilla.kernel.org/show_bug.cgi?id=8385 Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2007-05-09 21:31:03 -06:00
return AE_BAD_PARAMETER;
/*
* Allocate/initialize DPC structure. Note that this memory will be
2006-11-22 07:55:48 -07:00
* freed by the callee. The kernel handles the work_struct list in a
* way that allows us to also free its memory inside the callee.
* Because we may want to schedule several tasks with different
* parameters we can't use the approach some kernel code uses of
2006-11-22 07:55:48 -07:00
* having a static work_struct.
*/
2006-11-22 07:55:48 -07:00
dpc = kmalloc(sizeof(struct acpi_os_dpc), GFP_ATOMIC);
if (!dpc)
return AE_NO_MEMORY;
dpc->function = function;
dpc->context = context;
if (!hp) {
INIT_WORK(&dpc->work, acpi_os_execute_deferred);
queue = (type == OSL_NOTIFY_HANDLER) ?
kacpi_notify_wq : kacpid_wq;
ret = queue_work(queue, &dpc->work);
} else {
INIT_WORK(&dpc->work, acpi_os_execute_hp_deferred);
ret = schedule_work(&dpc->work);
}
if (!ret) {
printk(KERN_ERR PREFIX
"Call to queue_work() failed.\n");
status = AE_ERROR;
kfree(dpc);
}
return status;
}
acpi_status acpi_os_execute(acpi_execute_type type,
acpi_osd_exec_callback function, void *context)
{
return __acpi_os_execute(type, function, context, 0);
}
EXPORT_SYMBOL(acpi_os_execute);
acpi_status acpi_os_hotplug_execute(acpi_osd_exec_callback function,
void *context)
{
return __acpi_os_execute(0, function, context, 1);
}
void acpi_os_wait_events_complete(void *context)
{
flush_workqueue(kacpid_wq);
flush_workqueue(kacpi_notify_wq);
}
EXPORT_SYMBOL(acpi_os_wait_events_complete);
/*
* Allocate the memory for a spinlock and initialize it.
*/
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 15:04:00 -06:00
acpi_status acpi_os_create_lock(acpi_spinlock * handle)
{
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 15:04:00 -06:00
spin_lock_init(*handle);
return AE_OK;
}
/*
* Deallocate the memory for a spinlock.
*/
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 15:04:00 -06:00
void acpi_os_delete_lock(acpi_spinlock handle)
{
return;
}
acpi_status
acpi_os_create_semaphore(u32 max_units, u32 initial_units, acpi_handle * handle)
{
struct semaphore *sem = NULL;
sem = acpi_os_allocate(sizeof(struct semaphore));
if (!sem)
return AE_NO_MEMORY;
memset(sem, 0, sizeof(struct semaphore));
sema_init(sem, initial_units);
*handle = (acpi_handle *) sem;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Creating semaphore[%p|%d].\n",
*handle, initial_units));
return AE_OK;
}
/*
* TODO: A better way to delete semaphores? Linux doesn't have a
* 'delete_semaphore()' function -- may result in an invalid
* pointer dereference for non-synchronized consumers. Should
* we at least check for blocked threads and signal/cancel them?
*/
acpi_status acpi_os_delete_semaphore(acpi_handle handle)
{
struct semaphore *sem = (struct semaphore *)handle;
if (!sem)
return AE_BAD_PARAMETER;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Deleting semaphore[%p].\n", handle));
BUG_ON(!list_empty(&sem->wait_list));
kfree(sem);
sem = NULL;
return AE_OK;
}
/*
* TODO: Support for units > 1?
*/
acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout)
{
acpi_status status = AE_OK;
struct semaphore *sem = (struct semaphore *)handle;
long jiffies;
int ret = 0;
if (!sem || (units < 1))
return AE_BAD_PARAMETER;
if (units > 1)
return AE_SUPPORT;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Waiting for semaphore[%p|%d|%d]\n",
handle, units, timeout));
if (timeout == ACPI_WAIT_FOREVER)
jiffies = MAX_SCHEDULE_TIMEOUT;
else
jiffies = msecs_to_jiffies(timeout);
ret = down_timeout(sem, jiffies);
if (ret)
status = AE_TIME;
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Failed to acquire semaphore[%p|%d|%d], %s",
handle, units, timeout,
acpi_format_exception(status)));
} else {
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX,
"Acquired semaphore[%p|%d|%d]", handle,
units, timeout));
}
return status;
}
/*
* TODO: Support for units > 1?
*/
acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units)
{
struct semaphore *sem = (struct semaphore *)handle;
if (!sem || (units < 1))
return AE_BAD_PARAMETER;
if (units > 1)
return AE_SUPPORT;
ACPI_DEBUG_PRINT((ACPI_DB_MUTEX, "Signaling semaphore[%p|%d]\n", handle,
units));
up(sem);
return AE_OK;
}
#ifdef ACPI_FUTURE_USAGE
u32 acpi_os_get_line(char *buffer)
{
#ifdef ENABLE_DEBUGGER
if (acpi_in_debugger) {
u32 chars;
kdb_read(buffer, sizeof(line_buf));
/* remove the CR kdb includes */
chars = strlen(buffer) - 1;
buffer[chars] = '\0';
}
#endif
return 0;
}
#endif /* ACPI_FUTURE_USAGE */
acpi_status acpi_os_signal(u32 function, void *info)
{
switch (function) {
case ACPI_SIGNAL_FATAL:
printk(KERN_ERR PREFIX "Fatal opcode executed\n");
break;
case ACPI_SIGNAL_BREAKPOINT:
/*
* AML Breakpoint
* ACPI spec. says to treat it as a NOP unless
* you are debugging. So if/when we integrate
* AML debugger into the kernel debugger its
* hook will go here. But until then it is
* not useful to print anything on breakpoints.
*/
break;
default:
break;
}
return AE_OK;
}
static int __init acpi_os_name_setup(char *str)
{
char *p = acpi_os_name;
int count = ACPI_MAX_OVERRIDE_LEN - 1;
if (!str || !*str)
return 0;
for (; count-- && str && *str; str++) {
if (isalnum(*str) || *str == ' ' || *str == ':')
*p++ = *str;
else if (*str == '\'' || *str == '"')
continue;
else
break;
}
*p = 0;
return 1;
}
__setup("acpi_os_name=", acpi_os_name_setup);
static void __init set_osi_linux(unsigned int enable)
{
if (osi_linux.enable != enable) {
osi_linux.enable = enable;
printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n",
enable ? "Add": "Delet");
}
return;
}
static void __init acpi_cmdline_osi_linux(unsigned int enable)
{
osi_linux.cmdline = 1; /* cmdline set the default */
set_osi_linux(enable);
return;
}
void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
{
osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
if (enable == -1)
return;
osi_linux.known = 1; /* DMI knows which OSI(Linux) default needed */
set_osi_linux(enable);
return;
}
/*
* Modify the list of "OS Interfaces" reported to BIOS via _OSI
*
* empty string disables _OSI
* string starting with '!' disables that string
* otherwise string is added to list, augmenting built-in strings
*/
int __init acpi_osi_setup(char *str)
{
if (str == NULL || *str == '\0') {
printk(KERN_INFO PREFIX "_OSI method disabled\n");
acpi_gbl_create_osi_method = FALSE;
} else if (!strcmp("!Linux", str)) {
acpi_cmdline_osi_linux(0); /* !enable */
} else if (*str == '!') {
if (acpi_osi_invalidate(++str) == AE_OK)
printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
} else if (!strcmp("Linux", str)) {
acpi_cmdline_osi_linux(1); /* enable */
} else if (*osi_additional_string == '\0') {
strncpy(osi_additional_string, str, OSI_STRING_LENGTH_MAX);
printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
}
return 1;
}
__setup("acpi_osi=", acpi_osi_setup);
/* enable serialization to combat AE_ALREADY_EXISTS errors */
static int __init acpi_serialize_setup(char *str)
{
printk(KERN_INFO PREFIX "serialize enabled\n");
acpi_gbl_all_methods_serialized = TRUE;
return 1;
}
__setup("acpi_serialize", acpi_serialize_setup);
/*
* Wake and Run-Time GPES are expected to be separate.
* We disable wake-GPEs at run-time to prevent spurious
* interrupts.
*
* However, if a system exists that shares Wake and
* Run-time events on the same GPE this flag is available
* to tell Linux to keep the wake-time GPEs enabled at run-time.
*/
static int __init acpi_wake_gpes_always_on_setup(char *str)
{
printk(KERN_INFO PREFIX "wake GPEs not disabled\n");
acpi_gbl_leave_wake_gpes_disabled = FALSE;
return 1;
}
__setup("acpi_wake_gpes_always_on", acpi_wake_gpes_always_on_setup);
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
/* Check of resource interference between native drivers and ACPI
* OperationRegions (SystemIO and System Memory only).
* IO ports and memory declared in ACPI might be used by the ACPI subsystem
* in arbitrary AML code and can interfere with legacy drivers.
* acpi_enforce_resources= can be set to:
*
* - strict (default) (2)
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
* -> further driver trying to access the resources will not load
* - lax (1)
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
* -> further driver trying to access the resources will load, but you
* get a system message that something might go wrong...
*
* - no (0)
* -> ACPI Operation Region resources will not be registered
*
*/
#define ENFORCE_RESOURCES_STRICT 2
#define ENFORCE_RESOURCES_LAX 1
#define ENFORCE_RESOURCES_NO 0
static unsigned int acpi_enforce_resources = ENFORCE_RESOURCES_STRICT;
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
static int __init acpi_enforce_resources_setup(char *str)
{
if (str == NULL || *str == '\0')
return 0;
if (!strcmp("strict", str))
acpi_enforce_resources = ENFORCE_RESOURCES_STRICT;
else if (!strcmp("lax", str))
acpi_enforce_resources = ENFORCE_RESOURCES_LAX;
else if (!strcmp("no", str))
acpi_enforce_resources = ENFORCE_RESOURCES_NO;
return 1;
}
__setup("acpi_enforce_resources=", acpi_enforce_resources_setup);
/* Check for resource conflicts between ACPI OperationRegions and native
* drivers */
int acpi_check_resource_conflict(struct resource *res)
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
{
struct acpi_res_list *res_list_elem;
int ioport;
int clash = 0;
if (acpi_enforce_resources == ENFORCE_RESOURCES_NO)
return 0;
if (!(res->flags & IORESOURCE_IO) && !(res->flags & IORESOURCE_MEM))
return 0;
ioport = res->flags & IORESOURCE_IO;
spin_lock(&acpi_res_lock);
list_for_each_entry(res_list_elem, &resource_list_head,
resource_list) {
if (ioport && (res_list_elem->resource_type
!= ACPI_ADR_SPACE_SYSTEM_IO))
continue;
if (!ioport && (res_list_elem->resource_type
!= ACPI_ADR_SPACE_SYSTEM_MEMORY))
continue;
if (res->end < res_list_elem->start
|| res_list_elem->end < res->start)
continue;
clash = 1;
break;
}
spin_unlock(&acpi_res_lock);
if (clash) {
if (acpi_enforce_resources != ENFORCE_RESOURCES_NO) {
printk("%sACPI: %s resource %s [0x%llx-0x%llx]"
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
" conflicts with ACPI region %s"
" [0x%llx-0x%llx]\n",
acpi_enforce_resources == ENFORCE_RESOURCES_LAX
? KERN_WARNING : KERN_ERR,
ioport ? "I/O" : "Memory", res->name,
(long long) res->start, (long long) res->end,
res_list_elem->name,
(long long) res_list_elem->start,
(long long) res_list_elem->end);
printk(KERN_INFO "ACPI: Device needs an ACPI driver\n");
}
if (acpi_enforce_resources == ENFORCE_RESOURCES_STRICT)
return -EBUSY;
}
return 0;
}
EXPORT_SYMBOL(acpi_check_resource_conflict);
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
int acpi_check_region(resource_size_t start, resource_size_t n,
const char *name)
{
struct resource res = {
.start = start,
.end = start + n - 1,
.name = name,
.flags = IORESOURCE_IO,
};
return acpi_check_resource_conflict(&res);
}
EXPORT_SYMBOL(acpi_check_region);
int acpi_check_mem_region(resource_size_t start, resource_size_t n,
const char *name)
{
struct resource res = {
.start = start,
.end = start + n - 1,
.name = name,
.flags = IORESOURCE_MEM,
};
return acpi_check_resource_conflict(&res);
}
EXPORT_SYMBOL(acpi_check_mem_region);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
/*
* Acquire a spinlock.
*
* handle is a pointer to the spinlock_t.
*/
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 15:04:00 -06:00
acpi_cpu_flags acpi_os_acquire_lock(acpi_spinlock lockp)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
{
[ACPI] ACPICA 20060127 Implemented support in the Resource Manager to allow unresolved namestring references within resource package objects for the _PRT method. This support is in addition to the previously implemented unresolved reference support within the AML parser. If the interpreter slack mode is enabled (true on Linux unless acpi=strict), these unresolved references will be passed through to the caller as a NULL package entry. http://bugzilla.kernel.org/show_bug.cgi?id=5741 Implemented and deployed new macros and functions for error and warning messages across the subsystem. These macros are simpler and generate less code than their predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION, ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_* macros. Implemented the acpi_cpu_flags type to simplify host OS integration of the Acquire/Release Lock OSL interfaces. Suggested by Steven Rostedt and Andrew Morton. Fixed a problem where Alias ASL operators are sometimes not correctly resolved. causing AE_AML_INTERNAL http://bugzilla.kernel.org/show_bug.cgi?id=5189 http://bugzilla.kernel.org/show_bug.cgi?id=5674 Fixed several problems with the implementation of the ConcatenateResTemplate ASL operator. As per the ACPI specification, zero length buffers are now treated as a single EndTag. One-length buffers always cause a fatal exception. Non-zero length buffers that do not end with a full 2-byte EndTag cause a fatal exception. Fixed a possible structure overwrite in the AcpiGetObjectInfo external interface. (With assistance from Thomas Renninger) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-27 14:43:00 -07:00
acpi_cpu_flags flags;
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 15:04:00 -06:00
spin_lock_irqsave(lockp, flags);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
return flags;
}
/*
* Release a spinlock. See above.
*/
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 15:04:00 -06:00
void acpi_os_release_lock(acpi_spinlock lockp, acpi_cpu_flags flags)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
{
ACPI: ACPICA 20060623 Implemented a new acpi_spinlock type for the OSL lock interfaces. This allows the type to be customized to the host OS for improved efficiency (since a spinlock is usually a very small object.) Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 Implemented the initial deployment of new OSL mutex interfaces. Since some host operating systems have separate mutex and semaphore objects, this feature was requested. The base code now uses mutexes (and the new mutex interfaces) wherever a binary semaphore was used previously. However, for the current release, the mutex interfaces are defined as macros to map them to the existing semaphore interfaces. Fixed several problems with the support for the control method SyncLevel parameter. The SyncLevel now works according to the ACPI specification and in concert with the Mutex SyncLevel parameter, since the current SyncLevel is a property of the executing thread. Mutual exclusion for control methods is now implemented with a mutex instead of a semaphore. Fixed three instances of the use of the C shift operator in the bitfield support code (exfldio.c) to avoid the use of a shift value larger than the target data width. The behavior of C compilers is undefined in this case and can cause unpredictable results, and therefore the case must be detected and avoided. (Fiodor Suietov) Added an info message whenever an SSDT or OEM table is loaded dynamically via the Load() or LoadTable() ASL operators. This should improve debugging capability since it will show exactly what tables have been loaded (beyond the tables present in the RSDT/XSDT.) Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-23 15:04:00 -06:00
spin_unlock_irqrestore(lockp, flags);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
}
#ifndef ACPI_USE_LOCAL_CACHE
/*******************************************************************************
*
* FUNCTION: acpi_os_create_cache
*
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
* PARAMETERS: name - Ascii name for the cache
* size - Size of each cached object
* depth - Maximum depth of the cache (in objects) <ignored>
* cache - Where the new cache object is returned
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
*
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
* RETURN: status
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
*
* DESCRIPTION: Create a cache object
*
******************************************************************************/
acpi_status
acpi_os_create_cache(char *name, u16 size, u16 depth, acpi_cache_t ** cache)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
{
*cache = kmem_cache_create(name, size, 0, 0, NULL);
if (*cache == NULL)
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
return AE_ERROR;
else
return AE_OK;
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
}
/*******************************************************************************
*
* FUNCTION: acpi_os_purge_cache
*
* PARAMETERS: Cache - Handle to cache object
*
* RETURN: Status
*
* DESCRIPTION: Free all objects within the requested cache.
*
******************************************************************************/
acpi_status acpi_os_purge_cache(acpi_cache_t * cache)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
{
kmem_cache_shrink(cache);
return (AE_OK);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
}
/*******************************************************************************
*
* FUNCTION: acpi_os_delete_cache
*
* PARAMETERS: Cache - Handle to cache object
*
* RETURN: Status
*
* DESCRIPTION: Free all objects within the requested cache and delete the
* cache object.
*
******************************************************************************/
acpi_status acpi_os_delete_cache(acpi_cache_t * cache)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
{
kmem_cache_destroy(cache);
return (AE_OK);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
}
/*******************************************************************************
*
* FUNCTION: acpi_os_release_object
*
* PARAMETERS: Cache - Handle to cache object
* Object - The object to be released
*
* RETURN: None
*
* DESCRIPTION: Release an object to the specified cache. If cache is full,
* the object is deleted.
*
******************************************************************************/
acpi_status acpi_os_release_object(acpi_cache_t * cache, void *object)
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
{
kmem_cache_free(cache, object);
return (AE_OK);
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
}
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
/******************************************************************************
*
* FUNCTION: acpi_os_validate_interface
*
* PARAMETERS: interface - Requested interface to be validated
*
* RETURN: AE_OK if interface is supported, AE_SUPPORT otherwise
*
* DESCRIPTION: Match an interface string to the interfaces supported by the
* host. Strings originate from an AML call to the _OSI method.
*
*****************************************************************************/
acpi_status
acpi_os_validate_interface (char *interface)
{
if (!strncmp(osi_additional_string, interface, OSI_STRING_LENGTH_MAX))
return AE_OK;
if (!strcmp("Linux", interface)) {
printk(KERN_NOTICE PREFIX
"BIOS _OSI(Linux) query %s%s\n",
osi_linux.enable ? "honored" : "ignored",
osi_linux.cmdline ? " via cmdline" :
osi_linux.dmi ? " via DMI" : "");
if (osi_linux.enable)
return AE_OK;
}
return AE_SUPPORT;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
}
/******************************************************************************
*
* FUNCTION: acpi_os_validate_address
*
* PARAMETERS: space_id - ACPI space ID
* address - Physical address
* length - Address length
*
* RETURN: AE_OK if address/length is valid for the space_id. Otherwise,
* should return AE_AML_ILLEGAL_ADDRESS.
*
* DESCRIPTION: Validate a system address via the host OS. Used to validate
* the addresses accessed by AML operation regions.
*
*****************************************************************************/
acpi_status
acpi_os_validate_address (
u8 space_id,
acpi_physical_address address,
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
acpi_size length,
char *name)
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
{
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
struct acpi_res_list *res;
if (acpi_enforce_resources == ENFORCE_RESOURCES_NO)
return AE_OK;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
ACPI: track opregion names to avoid driver resource conflicts. Small ACPICA extension to be able to store the name of operation regions in osl.c later In ACPI, AML can define accesses to IO ports and System Memory by Operation Regions. Those are not registered as done by PNPACPI using resource templates (and _CRS/_SRS methods). The IO ports and System Memory regions may get accessed by arbitrary AML code. When native drivers are accessing the same resources bad things can happen (e.g. a critical shutdown temperature of 3000 C every 2 months or so). It is not really possible to register the operation regions via request_resource, as they often overlap with pnp or other resources (e.g. statically setup IO resources below 0x100). This approach stores all Operation Region declarations (IO and System Memory only) at ACPI table parse time. It offers a similar functionality like request_region and let drivers which are known to possibly use the same IO ports and Memory which are also often used by ACPI (hwmon and i2c) check for ACPI interference. A boot parameter acpi_enforce_resources=strict/lax/no is provided, which is default set to lax: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Depending on the feedback and the kind of interferences we see, this should be set to strict at later time. Goal of this patch set is: - Identify ACPI interferences in bug reports (very hard to reproduce and to identify) - Find BIOSes for that an ACPI driver should exist for specific HW instead of a native one. - stability in general Provide acpi_check_{mem_}region. Drivers can additionally check against possible ACPI interference by also invoking this shortly before they call request_region. If -EBUSY is returned, the driver must not load. Use acpi_enforce_resources=strict/lax/no options to: - strict: let conflicting drivers fail to load with an error message - lax: let conflicting driver work normal with a warning message - no: no functional change at all Cc: "Mark M. Hoffman" <mhoffman@lightlink.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Len Brown <lenb@kernel.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-05 00:31:22 -07:00
switch (space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
/* Only interference checks against SystemIO and SytemMemory
are needed */
res = kzalloc(sizeof(struct acpi_res_list), GFP_KERNEL);
if (!res)
return AE_OK;
/* ACPI names are fixed to 4 bytes, still better use strlcpy */
strlcpy(res->name, name, 5);
res->start = address;
res->end = address + length - 1;
res->resource_type = space_id;
spin_lock(&acpi_res_lock);
list_add(&res->resource_list, &resource_list_head);
spin_unlock(&acpi_res_lock);
pr_debug("Added %s resource: start: 0x%llx, end: 0x%llx, "
"name: %s\n", (space_id == ACPI_ADR_SPACE_SYSTEM_IO)
? "SystemIO" : "System Memory",
(unsigned long long)res->start,
(unsigned long long)res->end,
res->name);
break;
case ACPI_ADR_SPACE_PCI_CONFIG:
case ACPI_ADR_SPACE_EC:
case ACPI_ADR_SPACE_SMBUS:
case ACPI_ADR_SPACE_CMOS:
case ACPI_ADR_SPACE_PCI_BAR_TARGET:
case ACPI_ADR_SPACE_DATA_TABLE:
case ACPI_ADR_SPACE_FIXED_HARDWARE:
break;
}
return AE_OK;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-21 15:15:00 -06:00
}
ACPICA 20050617-0624 from Bob Moore <robert.moore@intel.com> ACPICA 20050617: Moved the object cache operations into the OS interface layer (OSL) to allow the host OS to handle these operations if desired (for example, the Linux OSL will invoke the slab allocator). This support is optional; the compile time define ACPI_USE_LOCAL_CACHE may be used to utilize the original cache code in the ACPI CA core. The new OSL interfaces are shown below. See utalloc.c for an example implementation, and acpiosxf.h for the exact interface definitions. Thanks to Alexey Starikovskiy. acpi_os_create_cache acpi_os_delete_cache acpi_os_purge_cache acpi_os_acquire_object acpi_os_release_object Modified the interfaces to acpi_os_acquire_lock and acpi_os_release_lock to return and restore a flags parameter. This fits better with many OS lock models. Note: the current execution state (interrupt handler or not) is no longer passed to these interfaces. If necessary, the OSL must determine this state by itself, a simple and fast operation. Thanks to Alexey Starikovskiy. Fixed a problem in the ACPI table handling where a valid XSDT was assumed present if the revision of the RSDP was 2 or greater. According to the ACPI specification, the XSDT is optional in all cases, and the table manager therefore now checks for both an RSDP >=2 and a valid XSDT pointer. Otherwise, the RSDT pointer is used. Some ACPI 2.0 compliant BIOSs contain only the RSDT. Fixed an interpreter problem with the Mid() operator in the case of an input string where the resulting output string is of zero length. It now correctly returns a valid, null terminated string object instead of a string object with a null pointer. Fixed a problem with the control method argument handling to allow a store to an Arg object that already contains an object of type Device. The Device object is now correctly overwritten. Previously, an error was returned. ACPICA 20050624: Modified the new OSL cache interfaces to use ACPI_CACHE_T as the type for the host-defined cache object. This allows the OSL implementation to define and type this object in any manner desired, simplifying the OSL implementation. For example, ACPI_CACHE_T is defined as kmem_cache_t for Linux, and should be defined in the OS-specific header file for other operating systems as required. Changed the interface to AcpiOsAcquireObject to directly return the requested object as the function return (instead of ACPI_STATUS.) This change was made for performance reasons, since this is the purpose of the interface in the first place. acpi_os_acquire_object is now similar to the acpi_os_allocate interface. Thanks to Alexey Starikovskiy. Modified the initialization sequence in acpi_initialize_subsystem to call the OSL interface acpi_osl_initialize first, before any local initialization. This change was required because the global initialization now calls OSL interfaces. Restructured the code base to split some files because of size and/or because the code logically belonged in a separate file. New files are listed below. utilities/utcache.c /* Local cache interfaces */ utilities/utmutex.c /* Local mutex support */ utilities/utstate.c /* State object support */ parser/psloop.c /* Main AML parse loop */ Signed-off-by: Len Brown <len.brown@intel.com>
2005-06-23 22:00:00 -06:00
#endif