kernel-fxtec-pro1x/arch/x86/include/asm/unistd_64.h

698 lines
22 KiB
C
Raw Normal View History

#ifndef _ASM_X86_UNISTD_64_H
#define _ASM_X86_UNISTD_64_H
#ifndef __SYSCALL
#define __SYSCALL(a, b)
#endif
/*
* This file contains the system call numbers.
*
* Note: holes are not allowed.
*/
/* at least 8 syscall per cacheline */
#define __NR_read 0
__SYSCALL(__NR_read, sys_read)
#define __NR_write 1
__SYSCALL(__NR_write, sys_write)
#define __NR_open 2
__SYSCALL(__NR_open, sys_open)
#define __NR_close 3
__SYSCALL(__NR_close, sys_close)
#define __NR_stat 4
__SYSCALL(__NR_stat, sys_newstat)
#define __NR_fstat 5
__SYSCALL(__NR_fstat, sys_newfstat)
#define __NR_lstat 6
__SYSCALL(__NR_lstat, sys_newlstat)
#define __NR_poll 7
__SYSCALL(__NR_poll, sys_poll)
#define __NR_lseek 8
__SYSCALL(__NR_lseek, sys_lseek)
#define __NR_mmap 9
__SYSCALL(__NR_mmap, sys_mmap)
#define __NR_mprotect 10
__SYSCALL(__NR_mprotect, sys_mprotect)
#define __NR_munmap 11
__SYSCALL(__NR_munmap, sys_munmap)
#define __NR_brk 12
__SYSCALL(__NR_brk, sys_brk)
#define __NR_rt_sigaction 13
__SYSCALL(__NR_rt_sigaction, sys_rt_sigaction)
#define __NR_rt_sigprocmask 14
__SYSCALL(__NR_rt_sigprocmask, sys_rt_sigprocmask)
#define __NR_rt_sigreturn 15
__SYSCALL(__NR_rt_sigreturn, stub_rt_sigreturn)
#define __NR_ioctl 16
__SYSCALL(__NR_ioctl, sys_ioctl)
#define __NR_pread64 17
__SYSCALL(__NR_pread64, sys_pread64)
#define __NR_pwrite64 18
__SYSCALL(__NR_pwrite64, sys_pwrite64)
#define __NR_readv 19
__SYSCALL(__NR_readv, sys_readv)
#define __NR_writev 20
__SYSCALL(__NR_writev, sys_writev)
#define __NR_access 21
__SYSCALL(__NR_access, sys_access)
#define __NR_pipe 22
__SYSCALL(__NR_pipe, sys_pipe)
#define __NR_select 23
__SYSCALL(__NR_select, sys_select)
#define __NR_sched_yield 24
__SYSCALL(__NR_sched_yield, sys_sched_yield)
#define __NR_mremap 25
__SYSCALL(__NR_mremap, sys_mremap)
#define __NR_msync 26
__SYSCALL(__NR_msync, sys_msync)
#define __NR_mincore 27
__SYSCALL(__NR_mincore, sys_mincore)
#define __NR_madvise 28
__SYSCALL(__NR_madvise, sys_madvise)
#define __NR_shmget 29
__SYSCALL(__NR_shmget, sys_shmget)
#define __NR_shmat 30
__SYSCALL(__NR_shmat, sys_shmat)
#define __NR_shmctl 31
__SYSCALL(__NR_shmctl, sys_shmctl)
#define __NR_dup 32
__SYSCALL(__NR_dup, sys_dup)
#define __NR_dup2 33
__SYSCALL(__NR_dup2, sys_dup2)
#define __NR_pause 34
__SYSCALL(__NR_pause, sys_pause)
#define __NR_nanosleep 35
__SYSCALL(__NR_nanosleep, sys_nanosleep)
#define __NR_getitimer 36
__SYSCALL(__NR_getitimer, sys_getitimer)
#define __NR_alarm 37
__SYSCALL(__NR_alarm, sys_alarm)
#define __NR_setitimer 38
__SYSCALL(__NR_setitimer, sys_setitimer)
#define __NR_getpid 39
__SYSCALL(__NR_getpid, sys_getpid)
#define __NR_sendfile 40
__SYSCALL(__NR_sendfile, sys_sendfile64)
#define __NR_socket 41
__SYSCALL(__NR_socket, sys_socket)
#define __NR_connect 42
__SYSCALL(__NR_connect, sys_connect)
#define __NR_accept 43
__SYSCALL(__NR_accept, sys_accept)
#define __NR_sendto 44
__SYSCALL(__NR_sendto, sys_sendto)
#define __NR_recvfrom 45
__SYSCALL(__NR_recvfrom, sys_recvfrom)
#define __NR_sendmsg 46
__SYSCALL(__NR_sendmsg, sys_sendmsg)
#define __NR_recvmsg 47
__SYSCALL(__NR_recvmsg, sys_recvmsg)
#define __NR_shutdown 48
__SYSCALL(__NR_shutdown, sys_shutdown)
#define __NR_bind 49
__SYSCALL(__NR_bind, sys_bind)
#define __NR_listen 50
__SYSCALL(__NR_listen, sys_listen)
#define __NR_getsockname 51
__SYSCALL(__NR_getsockname, sys_getsockname)
#define __NR_getpeername 52
__SYSCALL(__NR_getpeername, sys_getpeername)
#define __NR_socketpair 53
__SYSCALL(__NR_socketpair, sys_socketpair)
#define __NR_setsockopt 54
__SYSCALL(__NR_setsockopt, sys_setsockopt)
#define __NR_getsockopt 55
__SYSCALL(__NR_getsockopt, sys_getsockopt)
#define __NR_clone 56
__SYSCALL(__NR_clone, stub_clone)
#define __NR_fork 57
__SYSCALL(__NR_fork, stub_fork)
#define __NR_vfork 58
__SYSCALL(__NR_vfork, stub_vfork)
#define __NR_execve 59
__SYSCALL(__NR_execve, stub_execve)
#define __NR_exit 60
__SYSCALL(__NR_exit, sys_exit)
#define __NR_wait4 61
__SYSCALL(__NR_wait4, sys_wait4)
#define __NR_kill 62
__SYSCALL(__NR_kill, sys_kill)
#define __NR_uname 63
__SYSCALL(__NR_uname, sys_uname)
#define __NR_semget 64
__SYSCALL(__NR_semget, sys_semget)
#define __NR_semop 65
__SYSCALL(__NR_semop, sys_semop)
#define __NR_semctl 66
__SYSCALL(__NR_semctl, sys_semctl)
#define __NR_shmdt 67
__SYSCALL(__NR_shmdt, sys_shmdt)
#define __NR_msgget 68
__SYSCALL(__NR_msgget, sys_msgget)
#define __NR_msgsnd 69
__SYSCALL(__NR_msgsnd, sys_msgsnd)
#define __NR_msgrcv 70
__SYSCALL(__NR_msgrcv, sys_msgrcv)
#define __NR_msgctl 71
__SYSCALL(__NR_msgctl, sys_msgctl)
#define __NR_fcntl 72
__SYSCALL(__NR_fcntl, sys_fcntl)
#define __NR_flock 73
__SYSCALL(__NR_flock, sys_flock)
#define __NR_fsync 74
__SYSCALL(__NR_fsync, sys_fsync)
#define __NR_fdatasync 75
__SYSCALL(__NR_fdatasync, sys_fdatasync)
#define __NR_truncate 76
__SYSCALL(__NR_truncate, sys_truncate)
#define __NR_ftruncate 77
__SYSCALL(__NR_ftruncate, sys_ftruncate)
#define __NR_getdents 78
__SYSCALL(__NR_getdents, sys_getdents)
#define __NR_getcwd 79
__SYSCALL(__NR_getcwd, sys_getcwd)
#define __NR_chdir 80
__SYSCALL(__NR_chdir, sys_chdir)
#define __NR_fchdir 81
__SYSCALL(__NR_fchdir, sys_fchdir)
#define __NR_rename 82
__SYSCALL(__NR_rename, sys_rename)
#define __NR_mkdir 83
__SYSCALL(__NR_mkdir, sys_mkdir)
#define __NR_rmdir 84
__SYSCALL(__NR_rmdir, sys_rmdir)
#define __NR_creat 85
__SYSCALL(__NR_creat, sys_creat)
#define __NR_link 86
__SYSCALL(__NR_link, sys_link)
#define __NR_unlink 87
__SYSCALL(__NR_unlink, sys_unlink)
#define __NR_symlink 88
__SYSCALL(__NR_symlink, sys_symlink)
#define __NR_readlink 89
__SYSCALL(__NR_readlink, sys_readlink)
#define __NR_chmod 90
__SYSCALL(__NR_chmod, sys_chmod)
#define __NR_fchmod 91
__SYSCALL(__NR_fchmod, sys_fchmod)
#define __NR_chown 92
__SYSCALL(__NR_chown, sys_chown)
#define __NR_fchown 93
__SYSCALL(__NR_fchown, sys_fchown)
#define __NR_lchown 94
__SYSCALL(__NR_lchown, sys_lchown)
#define __NR_umask 95
__SYSCALL(__NR_umask, sys_umask)
#define __NR_gettimeofday 96
__SYSCALL(__NR_gettimeofday, sys_gettimeofday)
#define __NR_getrlimit 97
__SYSCALL(__NR_getrlimit, sys_getrlimit)
#define __NR_getrusage 98
__SYSCALL(__NR_getrusage, sys_getrusage)
#define __NR_sysinfo 99
__SYSCALL(__NR_sysinfo, sys_sysinfo)
#define __NR_times 100
__SYSCALL(__NR_times, sys_times)
#define __NR_ptrace 101
__SYSCALL(__NR_ptrace, sys_ptrace)
#define __NR_getuid 102
__SYSCALL(__NR_getuid, sys_getuid)
#define __NR_syslog 103
__SYSCALL(__NR_syslog, sys_syslog)
/* at the very end the stuff that never runs during the benchmarks */
#define __NR_getgid 104
__SYSCALL(__NR_getgid, sys_getgid)
#define __NR_setuid 105
__SYSCALL(__NR_setuid, sys_setuid)
#define __NR_setgid 106
__SYSCALL(__NR_setgid, sys_setgid)
#define __NR_geteuid 107
__SYSCALL(__NR_geteuid, sys_geteuid)
#define __NR_getegid 108
__SYSCALL(__NR_getegid, sys_getegid)
#define __NR_setpgid 109
__SYSCALL(__NR_setpgid, sys_setpgid)
#define __NR_getppid 110
__SYSCALL(__NR_getppid, sys_getppid)
#define __NR_getpgrp 111
__SYSCALL(__NR_getpgrp, sys_getpgrp)
#define __NR_setsid 112
__SYSCALL(__NR_setsid, sys_setsid)
#define __NR_setreuid 113
__SYSCALL(__NR_setreuid, sys_setreuid)
#define __NR_setregid 114
__SYSCALL(__NR_setregid, sys_setregid)
#define __NR_getgroups 115
__SYSCALL(__NR_getgroups, sys_getgroups)
#define __NR_setgroups 116
__SYSCALL(__NR_setgroups, sys_setgroups)
#define __NR_setresuid 117
__SYSCALL(__NR_setresuid, sys_setresuid)
#define __NR_getresuid 118
__SYSCALL(__NR_getresuid, sys_getresuid)
#define __NR_setresgid 119
__SYSCALL(__NR_setresgid, sys_setresgid)
#define __NR_getresgid 120
__SYSCALL(__NR_getresgid, sys_getresgid)
#define __NR_getpgid 121
__SYSCALL(__NR_getpgid, sys_getpgid)
#define __NR_setfsuid 122
__SYSCALL(__NR_setfsuid, sys_setfsuid)
#define __NR_setfsgid 123
__SYSCALL(__NR_setfsgid, sys_setfsgid)
#define __NR_getsid 124
__SYSCALL(__NR_getsid, sys_getsid)
#define __NR_capget 125
__SYSCALL(__NR_capget, sys_capget)
#define __NR_capset 126
__SYSCALL(__NR_capset, sys_capset)
#define __NR_rt_sigpending 127
__SYSCALL(__NR_rt_sigpending, sys_rt_sigpending)
#define __NR_rt_sigtimedwait 128
__SYSCALL(__NR_rt_sigtimedwait, sys_rt_sigtimedwait)
#define __NR_rt_sigqueueinfo 129
__SYSCALL(__NR_rt_sigqueueinfo, sys_rt_sigqueueinfo)
#define __NR_rt_sigsuspend 130
__SYSCALL(__NR_rt_sigsuspend, sys_rt_sigsuspend)
#define __NR_sigaltstack 131
__SYSCALL(__NR_sigaltstack, stub_sigaltstack)
#define __NR_utime 132
__SYSCALL(__NR_utime, sys_utime)
#define __NR_mknod 133
__SYSCALL(__NR_mknod, sys_mknod)
/* Only needed for a.out */
#define __NR_uselib 134
__SYSCALL(__NR_uselib, sys_ni_syscall)
#define __NR_personality 135
__SYSCALL(__NR_personality, sys_personality)
#define __NR_ustat 136
__SYSCALL(__NR_ustat, sys_ustat)
#define __NR_statfs 137
__SYSCALL(__NR_statfs, sys_statfs)
#define __NR_fstatfs 138
__SYSCALL(__NR_fstatfs, sys_fstatfs)
#define __NR_sysfs 139
__SYSCALL(__NR_sysfs, sys_sysfs)
#define __NR_getpriority 140
__SYSCALL(__NR_getpriority, sys_getpriority)
#define __NR_setpriority 141
__SYSCALL(__NR_setpriority, sys_setpriority)
#define __NR_sched_setparam 142
__SYSCALL(__NR_sched_setparam, sys_sched_setparam)
#define __NR_sched_getparam 143
__SYSCALL(__NR_sched_getparam, sys_sched_getparam)
#define __NR_sched_setscheduler 144
__SYSCALL(__NR_sched_setscheduler, sys_sched_setscheduler)
#define __NR_sched_getscheduler 145
__SYSCALL(__NR_sched_getscheduler, sys_sched_getscheduler)
#define __NR_sched_get_priority_max 146
__SYSCALL(__NR_sched_get_priority_max, sys_sched_get_priority_max)
#define __NR_sched_get_priority_min 147
__SYSCALL(__NR_sched_get_priority_min, sys_sched_get_priority_min)
#define __NR_sched_rr_get_interval 148
__SYSCALL(__NR_sched_rr_get_interval, sys_sched_rr_get_interval)
#define __NR_mlock 149
__SYSCALL(__NR_mlock, sys_mlock)
#define __NR_munlock 150
__SYSCALL(__NR_munlock, sys_munlock)
#define __NR_mlockall 151
__SYSCALL(__NR_mlockall, sys_mlockall)
#define __NR_munlockall 152
__SYSCALL(__NR_munlockall, sys_munlockall)
#define __NR_vhangup 153
__SYSCALL(__NR_vhangup, sys_vhangup)
#define __NR_modify_ldt 154
__SYSCALL(__NR_modify_ldt, sys_modify_ldt)
#define __NR_pivot_root 155
__SYSCALL(__NR_pivot_root, sys_pivot_root)
#define __NR__sysctl 156
__SYSCALL(__NR__sysctl, sys_sysctl)
#define __NR_prctl 157
__SYSCALL(__NR_prctl, sys_prctl)
#define __NR_arch_prctl 158
__SYSCALL(__NR_arch_prctl, sys_arch_prctl)
#define __NR_adjtimex 159
__SYSCALL(__NR_adjtimex, sys_adjtimex)
#define __NR_setrlimit 160
__SYSCALL(__NR_setrlimit, sys_setrlimit)
#define __NR_chroot 161
__SYSCALL(__NR_chroot, sys_chroot)
#define __NR_sync 162
__SYSCALL(__NR_sync, sys_sync)
#define __NR_acct 163
__SYSCALL(__NR_acct, sys_acct)
#define __NR_settimeofday 164
__SYSCALL(__NR_settimeofday, sys_settimeofday)
#define __NR_mount 165
__SYSCALL(__NR_mount, sys_mount)
#define __NR_umount2 166
__SYSCALL(__NR_umount2, sys_umount)
#define __NR_swapon 167
__SYSCALL(__NR_swapon, sys_swapon)
#define __NR_swapoff 168
__SYSCALL(__NR_swapoff, sys_swapoff)
#define __NR_reboot 169
__SYSCALL(__NR_reboot, sys_reboot)
#define __NR_sethostname 170
__SYSCALL(__NR_sethostname, sys_sethostname)
#define __NR_setdomainname 171
__SYSCALL(__NR_setdomainname, sys_setdomainname)
#define __NR_iopl 172
__SYSCALL(__NR_iopl, stub_iopl)
#define __NR_ioperm 173
__SYSCALL(__NR_ioperm, sys_ioperm)
#define __NR_create_module 174
__SYSCALL(__NR_create_module, sys_ni_syscall)
#define __NR_init_module 175
__SYSCALL(__NR_init_module, sys_init_module)
#define __NR_delete_module 176
__SYSCALL(__NR_delete_module, sys_delete_module)
#define __NR_get_kernel_syms 177
__SYSCALL(__NR_get_kernel_syms, sys_ni_syscall)
#define __NR_query_module 178
__SYSCALL(__NR_query_module, sys_ni_syscall)
#define __NR_quotactl 179
__SYSCALL(__NR_quotactl, sys_quotactl)
#define __NR_nfsservctl 180
__SYSCALL(__NR_nfsservctl, sys_nfsservctl)
/* reserved for LiS/STREAMS */
#define __NR_getpmsg 181
__SYSCALL(__NR_getpmsg, sys_ni_syscall)
#define __NR_putpmsg 182
__SYSCALL(__NR_putpmsg, sys_ni_syscall)
/* reserved for AFS */
#define __NR_afs_syscall 183
__SYSCALL(__NR_afs_syscall, sys_ni_syscall)
/* reserved for tux */
#define __NR_tuxcall 184
__SYSCALL(__NR_tuxcall, sys_ni_syscall)
#define __NR_security 185
__SYSCALL(__NR_security, sys_ni_syscall)
#define __NR_gettid 186
__SYSCALL(__NR_gettid, sys_gettid)
#define __NR_readahead 187
__SYSCALL(__NR_readahead, sys_readahead)
#define __NR_setxattr 188
__SYSCALL(__NR_setxattr, sys_setxattr)
#define __NR_lsetxattr 189
__SYSCALL(__NR_lsetxattr, sys_lsetxattr)
#define __NR_fsetxattr 190
__SYSCALL(__NR_fsetxattr, sys_fsetxattr)
#define __NR_getxattr 191
__SYSCALL(__NR_getxattr, sys_getxattr)
#define __NR_lgetxattr 192
__SYSCALL(__NR_lgetxattr, sys_lgetxattr)
#define __NR_fgetxattr 193
__SYSCALL(__NR_fgetxattr, sys_fgetxattr)
#define __NR_listxattr 194
__SYSCALL(__NR_listxattr, sys_listxattr)
#define __NR_llistxattr 195
__SYSCALL(__NR_llistxattr, sys_llistxattr)
#define __NR_flistxattr 196
__SYSCALL(__NR_flistxattr, sys_flistxattr)
#define __NR_removexattr 197
__SYSCALL(__NR_removexattr, sys_removexattr)
#define __NR_lremovexattr 198
__SYSCALL(__NR_lremovexattr, sys_lremovexattr)
#define __NR_fremovexattr 199
__SYSCALL(__NR_fremovexattr, sys_fremovexattr)
#define __NR_tkill 200
__SYSCALL(__NR_tkill, sys_tkill)
#define __NR_time 201
__SYSCALL(__NR_time, sys_time)
#define __NR_futex 202
__SYSCALL(__NR_futex, sys_futex)
#define __NR_sched_setaffinity 203
__SYSCALL(__NR_sched_setaffinity, sys_sched_setaffinity)
#define __NR_sched_getaffinity 204
__SYSCALL(__NR_sched_getaffinity, sys_sched_getaffinity)
#define __NR_set_thread_area 205
__SYSCALL(__NR_set_thread_area, sys_ni_syscall) /* use arch_prctl */
#define __NR_io_setup 206
__SYSCALL(__NR_io_setup, sys_io_setup)
#define __NR_io_destroy 207
__SYSCALL(__NR_io_destroy, sys_io_destroy)
#define __NR_io_getevents 208
__SYSCALL(__NR_io_getevents, sys_io_getevents)
#define __NR_io_submit 209
__SYSCALL(__NR_io_submit, sys_io_submit)
#define __NR_io_cancel 210
__SYSCALL(__NR_io_cancel, sys_io_cancel)
#define __NR_get_thread_area 211
__SYSCALL(__NR_get_thread_area, sys_ni_syscall) /* use arch_prctl */
#define __NR_lookup_dcookie 212
__SYSCALL(__NR_lookup_dcookie, sys_lookup_dcookie)
#define __NR_epoll_create 213
__SYSCALL(__NR_epoll_create, sys_epoll_create)
#define __NR_epoll_ctl_old 214
__SYSCALL(__NR_epoll_ctl_old, sys_ni_syscall)
#define __NR_epoll_wait_old 215
__SYSCALL(__NR_epoll_wait_old, sys_ni_syscall)
#define __NR_remap_file_pages 216
__SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
#define __NR_getdents64 217
__SYSCALL(__NR_getdents64, sys_getdents64)
#define __NR_set_tid_address 218
__SYSCALL(__NR_set_tid_address, sys_set_tid_address)
#define __NR_restart_syscall 219
__SYSCALL(__NR_restart_syscall, sys_restart_syscall)
#define __NR_semtimedop 220
__SYSCALL(__NR_semtimedop, sys_semtimedop)
#define __NR_fadvise64 221
__SYSCALL(__NR_fadvise64, sys_fadvise64)
#define __NR_timer_create 222
__SYSCALL(__NR_timer_create, sys_timer_create)
#define __NR_timer_settime 223
__SYSCALL(__NR_timer_settime, sys_timer_settime)
#define __NR_timer_gettime 224
__SYSCALL(__NR_timer_gettime, sys_timer_gettime)
#define __NR_timer_getoverrun 225
__SYSCALL(__NR_timer_getoverrun, sys_timer_getoverrun)
#define __NR_timer_delete 226
__SYSCALL(__NR_timer_delete, sys_timer_delete)
#define __NR_clock_settime 227
__SYSCALL(__NR_clock_settime, sys_clock_settime)
#define __NR_clock_gettime 228
__SYSCALL(__NR_clock_gettime, sys_clock_gettime)
#define __NR_clock_getres 229
__SYSCALL(__NR_clock_getres, sys_clock_getres)
#define __NR_clock_nanosleep 230
__SYSCALL(__NR_clock_nanosleep, sys_clock_nanosleep)
#define __NR_exit_group 231
__SYSCALL(__NR_exit_group, sys_exit_group)
#define __NR_epoll_wait 232
__SYSCALL(__NR_epoll_wait, sys_epoll_wait)
#define __NR_epoll_ctl 233
__SYSCALL(__NR_epoll_ctl, sys_epoll_ctl)
#define __NR_tgkill 234
__SYSCALL(__NR_tgkill, sys_tgkill)
#define __NR_utimes 235
__SYSCALL(__NR_utimes, sys_utimes)
#define __NR_vserver 236
__SYSCALL(__NR_vserver, sys_ni_syscall)
#define __NR_mbind 237
__SYSCALL(__NR_mbind, sys_mbind)
#define __NR_set_mempolicy 238
__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
#define __NR_get_mempolicy 239
__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
#define __NR_mq_open 240
__SYSCALL(__NR_mq_open, sys_mq_open)
#define __NR_mq_unlink 241
__SYSCALL(__NR_mq_unlink, sys_mq_unlink)
#define __NR_mq_timedsend 242
__SYSCALL(__NR_mq_timedsend, sys_mq_timedsend)
#define __NR_mq_timedreceive 243
__SYSCALL(__NR_mq_timedreceive, sys_mq_timedreceive)
#define __NR_mq_notify 244
__SYSCALL(__NR_mq_notify, sys_mq_notify)
#define __NR_mq_getsetattr 245
__SYSCALL(__NR_mq_getsetattr, sys_mq_getsetattr)
#define __NR_kexec_load 246
__SYSCALL(__NR_kexec_load, sys_kexec_load)
#define __NR_waitid 247
__SYSCALL(__NR_waitid, sys_waitid)
#define __NR_add_key 248
__SYSCALL(__NR_add_key, sys_add_key)
#define __NR_request_key 249
__SYSCALL(__NR_request_key, sys_request_key)
#define __NR_keyctl 250
__SYSCALL(__NR_keyctl, sys_keyctl)
#define __NR_ioprio_set 251
__SYSCALL(__NR_ioprio_set, sys_ioprio_set)
#define __NR_ioprio_get 252
__SYSCALL(__NR_ioprio_get, sys_ioprio_get)
#define __NR_inotify_init 253
__SYSCALL(__NR_inotify_init, sys_inotify_init)
#define __NR_inotify_add_watch 254
__SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
#define __NR_inotify_rm_watch 255
__SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
#define __NR_migrate_pages 256
[PATCH] Swap Migration V5: sys_migrate_pages interface sys_migrate_pages implementation using swap based page migration This is the original API proposed by Ray Bryant in his posts during the first half of 2005 on linux-mm@kvack.org and linux-kernel@vger.kernel.org. The intent of sys_migrate is to migrate memory of a process. A process may have migrated to another node. Memory was allocated optimally for the prior context. sys_migrate_pages allows to shift the memory to the new node. sys_migrate_pages is also useful if the processes available memory nodes have changed through cpuset operations to manually move the processes memory. Paul Jackson is working on an automated mechanism that will allow an automatic migration if the cpuset of a process is changed. However, a user may decide to manually control the migration. This implementation is put into the policy layer since it uses concepts and functions that are also needed for mbind and friends. The patch also provides a do_migrate_pages function that may be useful for cpusets to automatically move memory. sys_migrate_pages does not modify policies in contrast to Ray's implementation. The current code here is based on the swap based page migration capability and thus is not able to preserve the physical layout relative to it containing nodeset (which may be a cpuset). When direct page migration becomes available then the implementation needs to be changed to do a isomorphic move of pages between different nodesets. The current implementation simply evicts all pages in source nodeset that are not in the target nodeset. Patch supports ia64, i386 and x86_64. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 02:00:51 -07:00
__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
#define __NR_openat 257
__SYSCALL(__NR_openat, sys_openat)
#define __NR_mkdirat 258
__SYSCALL(__NR_mkdirat, sys_mkdirat)
#define __NR_mknodat 259
__SYSCALL(__NR_mknodat, sys_mknodat)
#define __NR_fchownat 260
__SYSCALL(__NR_fchownat, sys_fchownat)
#define __NR_futimesat 261
__SYSCALL(__NR_futimesat, sys_futimesat)
#define __NR_newfstatat 262
__SYSCALL(__NR_newfstatat, sys_newfstatat)
#define __NR_unlinkat 263
__SYSCALL(__NR_unlinkat, sys_unlinkat)
#define __NR_renameat 264
__SYSCALL(__NR_renameat, sys_renameat)
#define __NR_linkat 265
__SYSCALL(__NR_linkat, sys_linkat)
#define __NR_symlinkat 266
__SYSCALL(__NR_symlinkat, sys_symlinkat)
#define __NR_readlinkat 267
__SYSCALL(__NR_readlinkat, sys_readlinkat)
#define __NR_fchmodat 268
__SYSCALL(__NR_fchmodat, sys_fchmodat)
#define __NR_faccessat 269
__SYSCALL(__NR_faccessat, sys_faccessat)
#define __NR_pselect6 270
__SYSCALL(__NR_pselect6, sys_pselect6)
#define __NR_ppoll 271
__SYSCALL(__NR_ppoll, sys_ppoll)
#define __NR_unshare 272
__SYSCALL(__NR_unshare, sys_unshare)
#define __NR_set_robust_list 273
__SYSCALL(__NR_set_robust_list, sys_set_robust_list)
#define __NR_get_robust_list 274
__SYSCALL(__NR_get_robust_list, sys_get_robust_list)
#define __NR_splice 275
__SYSCALL(__NR_splice, sys_splice)
#define __NR_tee 276
__SYSCALL(__NR_tee, sys_tee)
#define __NR_sync_file_range 277
__SYSCALL(__NR_sync_file_range, sys_sync_file_range)
#define __NR_vmsplice 278
__SYSCALL(__NR_vmsplice, sys_vmsplice)
#define __NR_move_pages 279
__SYSCALL(__NR_move_pages, sys_move_pages)
#define __NR_utimensat 280
utimensat implementation Implement utimensat(2) which is an extension to futimesat(2) in that it a) supports nano-second resolution for the timestamps b) allows to selectively ignore the atime/mtime value c) allows to selectively use the current time for either atime or mtime d) supports changing the atime/mtime of a symlink itself along the lines of the BSD lutimes(3) functions For this change the internally used do_utimes() functions was changed to accept a timespec time value and an additional flags parameter. Additionally the sys_utime function was changed to match compat_sys_utime which already use do_utimes instead of duplicating the work. Also, the completely missing futimensat() functionality is added. We have such a function in glibc but we have to resort to using /proc/self/fd/* which not everybody likes (chroot etc). Test application (the syscall number will need per-arch editing): #include <errno.h> #include <fcntl.h> #include <time.h> #include <sys/time.h> #include <stddef.h> #include <syscall.h> #define __NR_utimensat 280 #define UTIME_NOW ((1l << 30) - 1l) #define UTIME_OMIT ((1l << 30) - 2l) int main(void) { int status = 0; int fd = open("ttt", O_RDWR|O_CREAT|O_EXCL, 0666); if (fd == -1) error (1, errno, "failed to create test file \"ttt\""); struct stat64 st1; if (fstat64 (fd, &st1) != 0) error (1, errno, "fstat failed"); struct timespec t[2]; t[0].tv_sec = 0; t[0].tv_nsec = 0; t[1].tv_sec = 0; t[1].tv_nsec = 0; if (syscall(__NR_utimensat, AT_FDCWD, "ttt", t, 0) != 0) error (1, errno, "utimensat failed"); struct stat64 st2; if (fstat64 (fd, &st2) != 0) error (1, errno, "fstat failed"); if (st2.st_atim.tv_sec != 0 || st2.st_atim.tv_nsec != 0) { puts ("atim not reset to zero"); status = 1; } if (st2.st_mtim.tv_sec != 0 || st2.st_mtim.tv_nsec != 0) { puts ("mtim not reset to zero"); status = 1; } if (status != 0) goto out; t[0] = st1.st_atim; t[1].tv_sec = 0; t[1].tv_nsec = UTIME_OMIT; if (syscall(__NR_utimensat, AT_FDCWD, "ttt", t, 0) != 0) error (1, errno, "utimensat failed"); if (fstat64 (fd, &st2) != 0) error (1, errno, "fstat failed"); if (st2.st_atim.tv_sec != st1.st_atim.tv_sec || st2.st_atim.tv_nsec != st1.st_atim.tv_nsec) { puts ("atim not set"); status = 1; } if (st2.st_mtim.tv_sec != 0 || st2.st_mtim.tv_nsec != 0) { puts ("mtim changed from zero"); status = 1; } if (status != 0) goto out; t[0].tv_sec = 0; t[0].tv_nsec = UTIME_OMIT; t[1] = st1.st_mtim; if (syscall(__NR_utimensat, AT_FDCWD, "ttt", t, 0) != 0) error (1, errno, "utimensat failed"); if (fstat64 (fd, &st2) != 0) error (1, errno, "fstat failed"); if (st2.st_atim.tv_sec != st1.st_atim.tv_sec || st2.st_atim.tv_nsec != st1.st_atim.tv_nsec) { puts ("mtim changed from original time"); status = 1; } if (st2.st_mtim.tv_sec != st1.st_mtim.tv_sec || st2.st_mtim.tv_nsec != st1.st_mtim.tv_nsec) { puts ("mtim not set"); status = 1; } if (status != 0) goto out; sleep (2); t[0].tv_sec = 0; t[0].tv_nsec = UTIME_NOW; t[1].tv_sec = 0; t[1].tv_nsec = UTIME_NOW; if (syscall(__NR_utimensat, AT_FDCWD, "ttt", t, 0) != 0) error (1, errno, "utimensat failed"); if (fstat64 (fd, &st2) != 0) error (1, errno, "fstat failed"); struct timeval tv; gettimeofday(&tv,NULL); if (st2.st_atim.tv_sec <= st1.st_atim.tv_sec || st2.st_atim.tv_sec > tv.tv_sec) { puts ("atim not set to NOW"); status = 1; } if (st2.st_mtim.tv_sec <= st1.st_mtim.tv_sec || st2.st_mtim.tv_sec > tv.tv_sec) { puts ("mtim not set to NOW"); status = 1; } if (symlink ("ttt", "tttsym") != 0) error (1, errno, "cannot create symlink"); t[0].tv_sec = 0; t[0].tv_nsec = 0; t[1].tv_sec = 0; t[1].tv_nsec = 0; if (syscall(__NR_utimensat, AT_FDCWD, "tttsym", t, AT_SYMLINK_NOFOLLOW) != 0) error (1, errno, "utimensat failed"); if (lstat64 ("tttsym", &st2) != 0) error (1, errno, "lstat failed"); if (st2.st_atim.tv_sec != 0 || st2.st_atim.tv_nsec != 0) { puts ("symlink atim not reset to zero"); status = 1; } if (st2.st_mtim.tv_sec != 0 || st2.st_mtim.tv_nsec != 0) { puts ("symlink mtim not reset to zero"); status = 1; } if (status != 0) goto out; t[0].tv_sec = 1; t[0].tv_nsec = 0; t[1].tv_sec = 1; t[1].tv_nsec = 0; if (syscall(__NR_utimensat, fd, NULL, t, 0) != 0) error (1, errno, "utimensat failed"); if (fstat64 (fd, &st2) != 0) error (1, errno, "fstat failed"); if (st2.st_atim.tv_sec != 1 || st2.st_atim.tv_nsec != 0) { puts ("atim not reset to one"); status = 1; } if (st2.st_mtim.tv_sec != 1 || st2.st_mtim.tv_nsec != 0) { puts ("mtim not reset to one"); status = 1; } if (status == 0) puts ("all OK"); out: close (fd); unlink ("ttt"); unlink ("tttsym"); return status; } [akpm@linux-foundation.org: add missing i386 syscall table entry] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Cc: Alexey Dobriyan <adobriyan@openvz.org> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 01:33:25 -06:00
__SYSCALL(__NR_utimensat, sys_utimensat)
#define __IGNORE_getcpu /* implemented as a vsyscall */
#define __NR_epoll_pwait 281
__SYSCALL(__NR_epoll_pwait, sys_epoll_pwait)
#define __NR_signalfd 282
__SYSCALL(__NR_signalfd, sys_signalfd)
#define __NR_timerfd_create 283
__SYSCALL(__NR_timerfd_create, sys_timerfd_create)
#define __NR_eventfd 284
__SYSCALL(__NR_eventfd, sys_eventfd)
#define __NR_fallocate 285
sys_fallocate() implementation on i386, x86_64 and powerpc fallocate() is a new system call being proposed here which will allow applications to preallocate space to any file(s) in a file system. Each file system implementation that wants to use this feature will need to support an inode operation called ->fallocate(). Applications can use this feature to avoid fragmentation to certain level and thus get faster access speed. With preallocation, applications also get a guarantee of space for particular file(s) - even if later the the system becomes full. Currently, glibc provides an interface called posix_fallocate() which can be used for similar cause. Though this has the advantage of working on all file systems, but it is quite slow (since it writes zeroes to each block that has to be preallocated). Without a doubt, file systems can do this more efficiently within the kernel, by implementing the proposed fallocate() system call. It is expected that posix_fallocate() will be modified to call this new system call first and incase the kernel/filesystem does not implement it, it should fall back to the current implementation of writing zeroes to the new blocks. ToDos: 1. Implementation on other architectures (other than i386, x86_64, and ppc). Patches for s390(x) and ia64 are already available from previous posts, but it was decided that they should be added later once fallocate is in the mainline. Hence not including those patches in this take. 2. Changes to glibc, a) to support fallocate() system call b) to make posix_fallocate() and posix_fallocate64() call fallocate() Signed-off-by: Amit Arora <aarora@in.ibm.com>
2007-07-17 19:42:44 -06:00
__SYSCALL(__NR_fallocate, sys_fallocate)
#define __NR_timerfd_settime 286
__SYSCALL(__NR_timerfd_settime, sys_timerfd_settime)
#define __NR_timerfd_gettime 287
__SYSCALL(__NR_timerfd_gettime, sys_timerfd_gettime)
reintroduce accept4 Introduce a new accept4() system call. The addition of this system call matches analogous changes in 2.6.27 (dup3(), evenfd2(), signalfd4(), inotify_init1(), epoll_create1(), pipe2()) which added new system calls that differed from analogous traditional system calls in adding a flags argument that can be used to access additional functionality. The accept4() system call is exactly the same as accept(), except that it adds a flags bit-mask argument. Two flags are initially implemented. (Most of the new system calls in 2.6.27 also had both of these flags.) SOCK_CLOEXEC causes the close-on-exec (FD_CLOEXEC) flag to be enabled for the new file descriptor returned by accept4(). This is a useful security feature to avoid leaking information in a multithreaded program where one thread is doing an accept() at the same time as another thread is doing a fork() plus exec(). More details here: http://udrepper.livejournal.com/20407.html "Secure File Descriptor Handling", Ulrich Drepper). The other flag is SOCK_NONBLOCK, which causes the O_NONBLOCK flag to be enabled on the new open file description created by accept4(). (This flag is merely a convenience, saving the use of additional calls fcntl(F_GETFL) and fcntl (F_SETFL) to achieve the same result. Here's a test program. Works on x86-32. Should work on x86-64, but I (mtk) don't have a system to hand to test with. It tests accept4() with each of the four possible combinations of SOCK_CLOEXEC and SOCK_NONBLOCK set/clear in 'flags', and verifies that the appropriate flags are set on the file descriptor/open file description returned by accept4(). I tested Ulrich's patch in this thread by applying against 2.6.28-rc2, and it passes according to my test program. /* test_accept4.c Copyright (C) 2008, Linux Foundation, written by Michael Kerrisk <mtk.manpages@gmail.com> Licensed under the GNU GPLv2 or later. */ #define _GNU_SOURCE #include <unistd.h> #include <sys/syscall.h> #include <sys/socket.h> #include <netinet/in.h> #include <stdlib.h> #include <fcntl.h> #include <stdio.h> #include <string.h> #define PORT_NUM 33333 #define die(msg) do { perror(msg); exit(EXIT_FAILURE); } while (0) /**********************************************************************/ /* The following is what we need until glibc gets a wrapper for accept4() */ /* Flags for socket(), socketpair(), accept4() */ #ifndef SOCK_CLOEXEC #define SOCK_CLOEXEC O_CLOEXEC #endif #ifndef SOCK_NONBLOCK #define SOCK_NONBLOCK O_NONBLOCK #endif #ifdef __x86_64__ #define SYS_accept4 288 #elif __i386__ #define USE_SOCKETCALL 1 #define SYS_ACCEPT4 18 #else #error "Sorry -- don't know the syscall # on this architecture" #endif static int accept4(int fd, struct sockaddr *sockaddr, socklen_t *addrlen, int flags) { printf("Calling accept4(): flags = %x", flags); if (flags != 0) { printf(" ("); if (flags & SOCK_CLOEXEC) printf("SOCK_CLOEXEC"); if ((flags & SOCK_CLOEXEC) && (flags & SOCK_NONBLOCK)) printf(" "); if (flags & SOCK_NONBLOCK) printf("SOCK_NONBLOCK"); printf(")"); } printf("\n"); #if USE_SOCKETCALL long args[6]; args[0] = fd; args[1] = (long) sockaddr; args[2] = (long) addrlen; args[3] = flags; return syscall(SYS_socketcall, SYS_ACCEPT4, args); #else return syscall(SYS_accept4, fd, sockaddr, addrlen, flags); #endif } /**********************************************************************/ static int do_test(int lfd, struct sockaddr_in *conn_addr, int closeonexec_flag, int nonblock_flag) { int connfd, acceptfd; int fdf, flf, fdf_pass, flf_pass; struct sockaddr_in claddr; socklen_t addrlen; printf("=======================================\n"); connfd = socket(AF_INET, SOCK_STREAM, 0); if (connfd == -1) die("socket"); if (connect(connfd, (struct sockaddr *) conn_addr, sizeof(struct sockaddr_in)) == -1) die("connect"); addrlen = sizeof(struct sockaddr_in); acceptfd = accept4(lfd, (struct sockaddr *) &claddr, &addrlen, closeonexec_flag | nonblock_flag); if (acceptfd == -1) { perror("accept4()"); close(connfd); return 0; } fdf = fcntl(acceptfd, F_GETFD); if (fdf == -1) die("fcntl:F_GETFD"); fdf_pass = ((fdf & FD_CLOEXEC) != 0) == ((closeonexec_flag & SOCK_CLOEXEC) != 0); printf("Close-on-exec flag is %sset (%s); ", (fdf & FD_CLOEXEC) ? "" : "not ", fdf_pass ? "OK" : "failed"); flf = fcntl(acceptfd, F_GETFL); if (flf == -1) die("fcntl:F_GETFD"); flf_pass = ((flf & O_NONBLOCK) != 0) == ((nonblock_flag & SOCK_NONBLOCK) !=0); printf("nonblock flag is %sset (%s)\n", (flf & O_NONBLOCK) ? "" : "not ", flf_pass ? "OK" : "failed"); close(acceptfd); close(connfd); printf("Test result: %s\n", (fdf_pass && flf_pass) ? "PASS" : "FAIL"); return fdf_pass && flf_pass; } static int create_listening_socket(int port_num) { struct sockaddr_in svaddr; int lfd; int optval; memset(&svaddr, 0, sizeof(struct sockaddr_in)); svaddr.sin_family = AF_INET; svaddr.sin_addr.s_addr = htonl(INADDR_ANY); svaddr.sin_port = htons(port_num); lfd = socket(AF_INET, SOCK_STREAM, 0); if (lfd == -1) die("socket"); optval = 1; if (setsockopt(lfd, SOL_SOCKET, SO_REUSEADDR, &optval, sizeof(optval)) == -1) die("setsockopt"); if (bind(lfd, (struct sockaddr *) &svaddr, sizeof(struct sockaddr_in)) == -1) die("bind"); if (listen(lfd, 5) == -1) die("listen"); return lfd; } int main(int argc, char *argv[]) { struct sockaddr_in conn_addr; int lfd; int port_num; int passed; passed = 1; port_num = (argc > 1) ? atoi(argv[1]) : PORT_NUM; memset(&conn_addr, 0, sizeof(struct sockaddr_in)); conn_addr.sin_family = AF_INET; conn_addr.sin_addr.s_addr = htonl(INADDR_LOOPBACK); conn_addr.sin_port = htons(port_num); lfd = create_listening_socket(port_num); if (!do_test(lfd, &conn_addr, 0, 0)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, 0)) passed = 0; if (!do_test(lfd, &conn_addr, 0, SOCK_NONBLOCK)) passed = 0; if (!do_test(lfd, &conn_addr, SOCK_CLOEXEC, SOCK_NONBLOCK)) passed = 0; close(lfd); exit(passed ? EXIT_SUCCESS : EXIT_FAILURE); } [mtk.manpages@gmail.com: rewrote changelog, updated test program] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Tested-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Cc: <linux-api@vger.kernel.org> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-19 16:36:14 -07:00
#define __NR_accept4 288
__SYSCALL(__NR_accept4, sys_accept4)
flag parameters: signalfd This patch adds the new signalfd4 syscall. It extends the old signalfd syscall by one parameter which is meant to hold a flag value. In this patch the only flag support is SFD_CLOEXEC which causes the close-on-exec flag for the returned file descriptor to be set. A new name SFD_CLOEXEC is introduced which in this implementation must have the same value as O_CLOEXEC. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <signal.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_signalfd4 # ifdef __x86_64__ # define __NR_signalfd4 289 # elif defined __i386__ # define __NR_signalfd4 327 # else # error "need __NR_signalfd4" # endif #endif #define SFD_CLOEXEC O_CLOEXEC int main (void) { sigset_t ss; sigemptyset (&ss); sigaddset (&ss, SIGUSR1); int fd = syscall (__NR_signalfd4, -1, &ss, 8, 0); if (fd == -1) { puts ("signalfd4(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("signalfd4(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_signalfd4, -1, &ss, 8, SFD_CLOEXEC); if (fd == -1) { puts ("signalfd4(SFD_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("signalfd4(SFD_CLOEXEC) does not set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 22:29:24 -06:00
#define __NR_signalfd4 289
__SYSCALL(__NR_signalfd4, sys_signalfd4)
flag parameters: eventfd This patch adds the new eventfd2 syscall. It extends the old eventfd syscall by one parameter which is meant to hold a flag value. In this patch the only flag support is EFD_CLOEXEC which causes the close-on-exec flag for the returned file descriptor to be set. A new name EFD_CLOEXEC is introduced which in this implementation must have the same value as O_CLOEXEC. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_eventfd2 # ifdef __x86_64__ # define __NR_eventfd2 290 # elif defined __i386__ # define __NR_eventfd2 328 # else # error "need __NR_eventfd2" # endif #endif #define EFD_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_eventfd2, 1, 0); if (fd == -1) { puts ("eventfd2(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("eventfd2(0) sets close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_eventfd2, 1, EFD_CLOEXEC); if (fd == -1) { puts ("eventfd2(EFD_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("eventfd2(EFD_CLOEXEC) does not set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 22:29:25 -06:00
#define __NR_eventfd2 290
__SYSCALL(__NR_eventfd2, sys_eventfd2)
flag parameters add-on: remove epoll_create size param Remove the size parameter from the new epoll_create syscall and renames the syscall itself. The updated test program follows. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_epoll_create2 # ifdef __x86_64__ # define __NR_epoll_create2 291 # elif defined __i386__ # define __NR_epoll_create2 329 # else # error "need __NR_epoll_create2" # endif #endif #define EPOLL_CLOEXEC O_CLOEXEC int main (void) { int fd = syscall (__NR_epoll_create2, 0); if (fd == -1) { puts ("epoll_create2(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("epoll_create2(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_epoll_create2, EPOLL_CLOEXEC); if (fd == -1) { puts ("epoll_create2(EPOLL_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("epoll_create2(EPOLL_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 22:29:43 -06:00
#define __NR_epoll_create1 291
__SYSCALL(__NR_epoll_create1, sys_epoll_create1)
flag parameters: dup2 This patch adds the new dup3 syscall. It extends the old dup2 syscall by one parameter which is meant to hold a flag value. Support for the O_CLOEXEC flag is added in this patch. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <time.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_dup3 # ifdef __x86_64__ # define __NR_dup3 292 # elif defined __i386__ # define __NR_dup3 330 # else # error "need __NR_dup3" # endif #endif int main (void) { int fd = syscall (__NR_dup3, 1, 4, 0); if (fd == -1) { puts ("dup3(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("dup3(0) set close-on-exec flag"); return 1; } close (fd); fd = syscall (__NR_dup3, 1, 4, O_CLOEXEC); if (fd == -1) { puts ("dup3(O_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("dup3(O_CLOEXEC) set close-on-exec flag"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 22:29:29 -06:00
#define __NR_dup3 292
__SYSCALL(__NR_dup3, sys_dup3)
flag parameters: pipe This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 22:29:30 -06:00
#define __NR_pipe2 293
__SYSCALL(__NR_pipe2, sys_pipe2)
flag parameters: inotify_init This patch introduces the new syscall inotify_init1 (note: the 1 stands for the one parameter the syscall takes, as opposed to no parameter before). The values accepted for this parameter are function-specific and defined in the inotify.h header. Here the values must match the O_* flags, though. In this patch CLOEXEC support is introduced. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_inotify_init1 # ifdef __x86_64__ # define __NR_inotify_init1 294 # elif defined __i386__ # define __NR_inotify_init1 332 # else # error "need __NR_inotify_init1" # endif #endif #define IN_CLOEXEC O_CLOEXEC int main (void) { int fd; fd = syscall (__NR_inotify_init1, 0); if (fd == -1) { puts ("inotify_init1(0) failed"); return 1; } int coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { puts ("inotify_init1(0) set close-on-exit"); return 1; } close (fd); fd = syscall (__NR_inotify_init1, IN_CLOEXEC); if (fd == -1) { puts ("inotify_init1(IN_CLOEXEC) failed"); return 1; } coe = fcntl (fd, F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { puts ("inotify_init1(O_CLOEXEC) does not set close-on-exit"); return 1; } close (fd); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ [akpm@linux-foundation.org: add sys_ni stub] Signed-off-by: Ulrich Drepper <drepper@redhat.com> Acked-by: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-23 22:29:32 -06:00
#define __NR_inotify_init1 294
__SYSCALL(__NR_inotify_init1, sys_inotify_init1)
preadv/pwritev: Add preadv and pwritev system calls. This patch adds preadv and pwritev system calls. These syscalls are a pretty straightforward combination of pread and readv (same for write). They are quite useful for doing vectored I/O in threaded applications. Using lseek+readv instead opens race windows you'll have to plug with locking. Other systems have such system calls too, for example NetBSD, check here: http://www.daemon-systems.org/man/preadv.2.html The application-visible interface provided by glibc should look like this to be compatible to the existing implementations in the *BSD family: ssize_t preadv(int d, const struct iovec *iov, int iovcnt, off_t offset); ssize_t pwritev(int d, const struct iovec *iov, int iovcnt, off_t offset); This prototype has one problem though: On 32bit archs is the (64bit) offset argument unaligned, which the syscall ABI of several archs doesn't allow to do. At least s390 needs a wrapper in glibc to handle this. As we'll need a wrappers in glibc anyway I've decided to push problem to glibc entriely and use a syscall prototype which works without arch-specific wrappers inside the kernel: The offset argument is explicitly splitted into two 32bit values. The patch sports the actual system call implementation and the windup in the x86 system call tables. Other archs follow as separate patches. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <linux-api@vger.kernel.org> Cc: <linux-arch@vger.kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 17:59:23 -06:00
#define __NR_preadv 295
__SYSCALL(__NR_preadv, sys_preadv)
#define __NR_pwritev 296
__SYSCALL(__NR_pwritev, sys_pwritev)
#ifndef __NO_STUBS
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
#define __ARCH_WANT_SYS_ALARM
#define __ARCH_WANT_SYS_GETHOSTNAME
#define __ARCH_WANT_SYS_PAUSE
#define __ARCH_WANT_SYS_SGETMASK
#define __ARCH_WANT_SYS_SIGNAL
#define __ARCH_WANT_SYS_UTIME
#define __ARCH_WANT_SYS_WAITPID
#define __ARCH_WANT_SYS_SOCKETCALL
#define __ARCH_WANT_SYS_FADVISE64
#define __ARCH_WANT_SYS_GETPGRP
#define __ARCH_WANT_SYS_LLSEEK
#define __ARCH_WANT_SYS_NICE
#define __ARCH_WANT_SYS_OLD_GETRLIMIT
#define __ARCH_WANT_SYS_OLDUMOUNT
#define __ARCH_WANT_SYS_SIGPENDING
#define __ARCH_WANT_SYS_SIGPROCMASK
#define __ARCH_WANT_SYS_RT_SIGACTION
#define __ARCH_WANT_SYS_RT_SIGSUSPEND
#define __ARCH_WANT_SYS_TIME
#define __ARCH_WANT_COMPAT_SYS_TIME
[PATCH] rename the provided execve functions to kernel_execve Some architectures provide an execve function that does not set errno, but instead returns the result code directly. Rename these to kernel_execve to get the right semantics there. Moreover, there is no reasone for any of these architectures to still provide __KERNEL_SYSCALLS__ or _syscallN macros, so remove these right away. [akpm@osdl.org: build fix] [bunk@stusta.de: build fix] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Andi Kleen <ak@muc.de> Acked-by: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 03:18:31 -06:00
#endif /* __NO_STUBS */
#ifdef __KERNEL__
/*
* "Conditional" syscalls
*
* What we want is __attribute__((weak,alias("sys_ni_syscall"))),
* but it doesn't work on all toolchains, so we just do it by hand
*/
#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall")
#endif /* __KERNEL__ */
#endif /* _ASM_X86_UNISTD_64_H */