Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/arm/plat-s3c/Makefile

45 lines
881 B
Makefile
Raw Normal View History

[ARM] S3C24XX: Move initialisation code to arch/arm/plat-s3c We need to add plat-s3c to the build to get the headers that will go in here once moved from include/asm-arm so we may as well put some useful common s3c code in here to stop the errors generated form having nothing built. The cpu setup is now passed the cpu idcode and the table of supported cpus to s3c_init_cpu() to abstract the cpu identification out of the initial io setup. As well as moving the cpu initialisation code, we move the map of the board specific items up to the calling code as none of the map_io() functions actually do anything other than pass this to iotable_init(). This patch does not rename any of the init functions that will be common to s3c24xx and any other s3c architectures as this can be done at a later date as it will touch all the board support files which use functions such as s3c24xx_init_clocks() and s3c24xx_init_uarts(). Note, the header arch/arm/plat-s3c24xx/include/plat/cpu.h still has functions that are used by both the cpu and board initialisation functions. This means that each board has definitions specific to the cpu support included and the vice-versa. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21 07:06:31 -06:00
# arch/arm/plat-s3c/Makefile
#
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2
[ARM] S3C24XX: Move files out of include/asm-arm/plat-s3c* First move of items out of include/asm-arm/plat-s3c* to their new homes under arch/arm/plat-s3c/include/plat and arch/arm/plat-s3c24xx/include/plat directories. Note, we have to create a dummy arch/arm/plat-s3c/Makefile to allow us to add arch/arm/plat-s3c/include/plat to the path. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-07 15:26:09 -06:00
[ARM] S3C24XX: Move initialisation code to arch/arm/plat-s3c We need to add plat-s3c to the build to get the headers that will go in here once moved from include/asm-arm so we may as well put some useful common s3c code in here to stop the errors generated form having nothing built. The cpu setup is now passed the cpu idcode and the table of supported cpus to s3c_init_cpu() to abstract the cpu identification out of the initial io setup. As well as moving the cpu initialisation code, we move the map of the board specific items up to the calling code as none of the map_io() functions actually do anything other than pass this to iotable_init(). This patch does not rename any of the init functions that will be common to s3c24xx and any other s3c architectures as this can be done at a later date as it will touch all the board support files which use functions such as s3c24xx_init_clocks() and s3c24xx_init_uarts(). Note, the header arch/arm/plat-s3c24xx/include/plat/cpu.h still has functions that are used by both the cpu and board initialisation functions. This means that each board has definitions specific to the cpu support included and the vice-versa. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21 07:06:31 -06:00
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core support for all Samsung SoCs
ARM: SAMSUNG: Move clock.c to arch/arm/plat-samsung This is the core implementation of the clock code for all Samsung based SoCs, so move it to arch/arm/plat-samsung (the clock.h file has already been moved). Since the file is built for every Samsung SoC, no changes are needed to the Kconfig system. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-12-23 11:43:48 -07:00
obj-y += init.o
[ARM] S3C: Move time.c to arch/arm/plat-s3c Move time.c to arch/arm/plat-s3c to be shared with the S3C64XX implementations. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21 07:06:53 -06:00
obj-y += time.o
[ARM] S3C: Move HSMMC device definition to plat-s3ec Move the definition for the hsmmc device to plat-s3c to be shared between the s3c24xx and s3c64xx platforms. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31 10:14:28 -06:00
obj-y += pwm-clock.o
[ARM] S3C: Move common GPIO code from plat-s3c24xx Move the common parts of the GPIO code into plat-s3c for use with both the s3c24xx and s3c64xx systems. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31 10:14:31 -06:00
obj-y += gpio.o
[ARM] S3C: Add new GPIO configuration calls Add new GPIO configuration calls that mesh with the new gpiolib support. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31 10:14:34 -06:00
obj-y += gpio-config.o
[ARM] S3C: Move HSMMC device definition to plat-s3ec Move the definition for the hsmmc device to plat-s3c to be shared between the s3c24xx and s3c64xx platforms. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31 10:14:28 -06:00
[ARM] S3C: Move DMA channel management code to plat-s3c Change the name of S3C2410_DMA_CHANNELS to S3C_DMA_CHANNELS in the process. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-19 09:02:39 -06:00
# DMA support
obj-$(CONFIG_S3C_DMA) += dma.o
[ARM] S3C: Move PM support functions to common location Start moving the PM code by moving all the common support functions to a common location in arch/arm/plat-s3c. With the move we rename the functions from s3cxxx_ to s3c_ to fit the new location. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-11 17:24:06 -07:00
# PM support
obj-$(CONFIG_PM) += pm.o
[ARM] S3C: GPIO PM core GPIOlib integration Move the GPIO suspend/resume support inline with the gpiolib support so that it will work with both the S3C24XX and S3C64XX series. The s3c_gpio_chip is extended to have a pm callback and a save block to keep the state of the GPIO over suspend, and the code from the s3c24xx implementation is added to a new common file. The suspend process now uses the list of registered chips to go through saving and restoring each one as appropriate, using the pm callback to select the appropriate routine depending on the type of control register present. This change also means that any additional GPIO added should not require changes to the PM. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-11 17:24:30 -07:00
obj-$(CONFIG_PM) += pm-gpio.o
[ARM] S3C: Split the resume memory check code from pm.c Split the optional memory check code out of the pm.c file as it is quite a big #ifdef block and as-such can be moved out and simply compiled when the configuration is set. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-11 17:24:07 -07:00
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
[ARM] S3C: Move PM support functions to common location Start moving the PM code by moving all the common support functions to a common location in arch/arm/plat-s3c. With the move we rename the functions from s3cxxx_ to s3c_ to fit the new location. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-12-11 17:24:06 -07:00
ARM: S3C: move timer/pwm handling from plat-s3c24xx to plat-s3c The s3c64xx devices use the same hardware core as s3c24xx, so move the timer/pwm handling to plat-s3c so it can be used by both. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-07-01 09:47:07 -06:00
# PWM support
obj-$(CONFIG_HAVE_PWM) += pwm.o
[ARM] S3C: Move HSMMC device definition to plat-s3ec Move the definition for the hsmmc device to plat-s3c to be shared between the s3c24xx and s3c64xx platforms. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31 10:14:28 -06:00
# devices
obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o
[ARM] S3C: Add SDHCI (HSMMC) channel 1 device definition Add device definition and support code for the Samsung HSMMC channel 1 device. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31 10:14:39 -06:00
obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o
ARM: S5PC1xx: add platform helpers for SDHCI host controllers Samsung S5PC100 has 3 SDHCI controllers compatible with the one known from previous SoCs series. Add required platform setup and support code that the devices can be used with sdhci-s3c driver. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-11-17 00:41:23 -07:00
obj-$(CONFIG_S3C_DEV_HSMMC2) += dev-hsmmc2.o
[ARM] S3C: Make i2c device definition common to plat-s3c Make the device i2c0 common to plat-s3c and move the definitions from arch/arm/plat-s3c24xx/devs.c Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31 10:14:40 -06:00
obj-y += dev-i2c0.o
[ARM] S3C: Add i2c1 device definition Add device definition and support functions for the second i2c device (i2c1). If this is selected, the first i2c bus will become index 0 instead of index -1. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-31 10:14:55 -06:00
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
[ARM] S3C: Add new FB device definition Add a device definition for the new S3C framebuffer driver. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-19 08:41:31 -07:00
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
[ARM] S3C: Add common USB OHCI device definition Add common definition for USB OHCI platform device, add a Kconfig to selectively compile it and add update all the users. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-06 12:49:48 -07:00
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
[ARM] S3C: Add USB high-speed/OtG device definitions Add platform device definitions for the high-speed and OtG capable device block on the newer Samsung parts. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-05-16 15:05:27 -06:00
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
ARM: S3C: Add S3C_DEV_NAND Kconfig entry Currently the S5PC100 does not define S3C_PA_NAND, leaving the NAND device definitions in arch/arm/plat-s3c/dev-nand.c unbuildable. Add a KConfig entry to select whether this is built. As backwards compatibility, both the S3C24XX and S3C64XX define the new configuration in their main Kconfig files until better support for basing this selection on a per-machine basis can be sorted out. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-08-16 16:54:58 -06:00
obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
Reference in a new issue Copy permalink