kernel-fxtec-pro1x/fs/debugfs/file.c

1180 lines
39 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* file.c - part of debugfs, a tiny little debug file system
*
* Copyright (C) 2004 Greg Kroah-Hartman <greg@kroah.com>
* Copyright (C) 2004 IBM Inc.
*
* debugfs is for people to use instead of /proc or /sys.
* See Documentation/filesystems/ for more details.
*/
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/seq_file.h>
#include <linux/pagemap.h>
#include <linux/debugfs.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/atomic.h>
#include <linux/device.h>
#include <linux/poll.h>
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
#include "internal.h"
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
struct poll_table_struct;
static ssize_t default_read_file(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
return 0;
}
static ssize_t default_write_file(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
return count;
}
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
const struct file_operations debugfs_noop_file_operations = {
.read = default_read_file,
.write = default_write_file,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 10:52:59 -06:00
.llseek = noop_llseek,
};
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
#define F_DENTRY(filp) ((filp)->f_path.dentry)
const struct file_operations *debugfs_real_fops(const struct file *filp)
{
struct debugfs_fsdata *fsd = F_DENTRY(filp)->d_fsdata;
debugfs: defer debugfs_fsdata allocation to first usage Currently, __debugfs_create_file allocates one struct debugfs_fsdata instance for every file created. However, there are potentially many debugfs file around, most of which are never touched by userspace. Thus, defer the allocations to the first usage, i.e. to the first debugfs_file_get(). A dentry's ->d_fsdata starts out to point to the "real", user provided fops. After a debugfs_fsdata instance has been allocated (and the real fops pointer has been moved over into its ->real_fops member), ->d_fsdata is changed to point to it from then on. The two cases are distinguished by setting BIT(0) for the real fops case. struct debugfs_fsdata's foremost purpose is to track active users and to make debugfs_remove() block until they are done. Since no debugfs_fsdata instance means no active users, make debugfs_remove() return immediately in this case. Take care of possible races between debugfs_file_get() and debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata instance and thus wait for possible active users or debugfs_file_get() must see a dead dentry and return immediately. Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether ->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it. Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually a debugfs_fsdata instance before returning it, otherwise emit a warning. The set of possible error codes returned from debugfs_file_get() has grown from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open() pass the -ENOMEM onwards to their callers. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:54 -06:00
if ((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT) {
/*
* Urgh, we've been called w/o a protecting
* debugfs_file_get().
*/
WARN_ON(1);
return NULL;
}
return fsd->real_fops;
}
EXPORT_SYMBOL_GPL(debugfs_real_fops);
debugfs: implement per-file removal protection Since commit 49d200deaa68 ("debugfs: prevent access to removed files' private data"), accesses to a file's private data are protected from concurrent removal by covering all file_operations with a SRCU read section and sychronizing with those before returning from debugfs_remove() by means of synchronize_srcu(). As pointed out by Johannes Berg, there are debugfs files with forever blocking file_operations. Their corresponding SRCU read side sections would block any debugfs_remove() forever as well, even unrelated ones. This results in a livelock. Because a remover can't cancel any indefinite blocking within foreign files, this is a problem. Resolve this by introducing support for more granular protection on a per-file basis. This is implemented by introducing an 'active_users' refcount_t to the per-file struct debugfs_fsdata state. At file creation time, it is set to one and a debugfs_remove() will drop that initial reference. The new debugfs_file_get() and debugfs_file_put(), intended to be used in place of former debugfs_use_file_start() and debugfs_use_file_finish(), increment and decrement it respectively. Once the count drops to zero, debugfs_file_put() will signal a completion which is possibly being waited for from debugfs_remove(). Thus, as long as there is a debugfs_file_get() not yet matched by a corresponding debugfs_file_put() around, debugfs_remove() will block. Actual users of debugfs_use_file_start() and -finish() will get converted to the new debugfs_file_get() and debugfs_file_put() by followup patches. Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:48 -06:00
/**
* debugfs_file_get - mark the beginning of file data access
* @dentry: the dentry object whose data is being accessed.
*
* Up to a matching call to debugfs_file_put(), any successive call
* into the file removing functions debugfs_remove() and
* debugfs_remove_recursive() will block. Since associated private
* file data may only get freed after a successful return of any of
* the removal functions, you may safely access it after a successful
* call to debugfs_file_get() without worrying about lifetime issues.
*
* If -%EIO is returned, the file has already been removed and thus,
* it is not safe to access any of its data. If, on the other hand,
* it is allowed to access the file data, zero is returned.
*/
int debugfs_file_get(struct dentry *dentry)
{
debugfs: defer debugfs_fsdata allocation to first usage Currently, __debugfs_create_file allocates one struct debugfs_fsdata instance for every file created. However, there are potentially many debugfs file around, most of which are never touched by userspace. Thus, defer the allocations to the first usage, i.e. to the first debugfs_file_get(). A dentry's ->d_fsdata starts out to point to the "real", user provided fops. After a debugfs_fsdata instance has been allocated (and the real fops pointer has been moved over into its ->real_fops member), ->d_fsdata is changed to point to it from then on. The two cases are distinguished by setting BIT(0) for the real fops case. struct debugfs_fsdata's foremost purpose is to track active users and to make debugfs_remove() block until they are done. Since no debugfs_fsdata instance means no active users, make debugfs_remove() return immediately in this case. Take care of possible races between debugfs_file_get() and debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata instance and thus wait for possible active users or debugfs_file_get() must see a dead dentry and return immediately. Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether ->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it. Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually a debugfs_fsdata instance before returning it, otherwise emit a warning. The set of possible error codes returned from debugfs_file_get() has grown from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open() pass the -ENOMEM onwards to their callers. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:54 -06:00
struct debugfs_fsdata *fsd;
void *d_fsd;
d_fsd = READ_ONCE(dentry->d_fsdata);
if (!((unsigned long)d_fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT)) {
fsd = d_fsd;
} else {
fsd = kmalloc(sizeof(*fsd), GFP_KERNEL);
if (!fsd)
return -ENOMEM;
fsd->real_fops = (void *)((unsigned long)d_fsd &
~DEBUGFS_FSDATA_IS_REAL_FOPS_BIT);
refcount_set(&fsd->active_users, 1);
init_completion(&fsd->active_users_drained);
if (cmpxchg(&dentry->d_fsdata, d_fsd, fsd) != d_fsd) {
kfree(fsd);
fsd = READ_ONCE(dentry->d_fsdata);
}
}
debugfs: implement per-file removal protection Since commit 49d200deaa68 ("debugfs: prevent access to removed files' private data"), accesses to a file's private data are protected from concurrent removal by covering all file_operations with a SRCU read section and sychronizing with those before returning from debugfs_remove() by means of synchronize_srcu(). As pointed out by Johannes Berg, there are debugfs files with forever blocking file_operations. Their corresponding SRCU read side sections would block any debugfs_remove() forever as well, even unrelated ones. This results in a livelock. Because a remover can't cancel any indefinite blocking within foreign files, this is a problem. Resolve this by introducing support for more granular protection on a per-file basis. This is implemented by introducing an 'active_users' refcount_t to the per-file struct debugfs_fsdata state. At file creation time, it is set to one and a debugfs_remove() will drop that initial reference. The new debugfs_file_get() and debugfs_file_put(), intended to be used in place of former debugfs_use_file_start() and debugfs_use_file_finish(), increment and decrement it respectively. Once the count drops to zero, debugfs_file_put() will signal a completion which is possibly being waited for from debugfs_remove(). Thus, as long as there is a debugfs_file_get() not yet matched by a corresponding debugfs_file_put() around, debugfs_remove() will block. Actual users of debugfs_use_file_start() and -finish() will get converted to the new debugfs_file_get() and debugfs_file_put() by followup patches. Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:48 -06:00
debugfs: defer debugfs_fsdata allocation to first usage Currently, __debugfs_create_file allocates one struct debugfs_fsdata instance for every file created. However, there are potentially many debugfs file around, most of which are never touched by userspace. Thus, defer the allocations to the first usage, i.e. to the first debugfs_file_get(). A dentry's ->d_fsdata starts out to point to the "real", user provided fops. After a debugfs_fsdata instance has been allocated (and the real fops pointer has been moved over into its ->real_fops member), ->d_fsdata is changed to point to it from then on. The two cases are distinguished by setting BIT(0) for the real fops case. struct debugfs_fsdata's foremost purpose is to track active users and to make debugfs_remove() block until they are done. Since no debugfs_fsdata instance means no active users, make debugfs_remove() return immediately in this case. Take care of possible races between debugfs_file_get() and debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata instance and thus wait for possible active users or debugfs_file_get() must see a dead dentry and return immediately. Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether ->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it. Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually a debugfs_fsdata instance before returning it, otherwise emit a warning. The set of possible error codes returned from debugfs_file_get() has grown from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open() pass the -ENOMEM onwards to their callers. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:54 -06:00
/*
* In case of a successful cmpxchg() above, this check is
* strictly necessary and must follow it, see the comment in
* __debugfs_remove_file().
* OTOH, if the cmpxchg() hasn't been executed or wasn't
* successful, this serves the purpose of not starving
* removers.
*/
debugfs: implement per-file removal protection Since commit 49d200deaa68 ("debugfs: prevent access to removed files' private data"), accesses to a file's private data are protected from concurrent removal by covering all file_operations with a SRCU read section and sychronizing with those before returning from debugfs_remove() by means of synchronize_srcu(). As pointed out by Johannes Berg, there are debugfs files with forever blocking file_operations. Their corresponding SRCU read side sections would block any debugfs_remove() forever as well, even unrelated ones. This results in a livelock. Because a remover can't cancel any indefinite blocking within foreign files, this is a problem. Resolve this by introducing support for more granular protection on a per-file basis. This is implemented by introducing an 'active_users' refcount_t to the per-file struct debugfs_fsdata state. At file creation time, it is set to one and a debugfs_remove() will drop that initial reference. The new debugfs_file_get() and debugfs_file_put(), intended to be used in place of former debugfs_use_file_start() and debugfs_use_file_finish(), increment and decrement it respectively. Once the count drops to zero, debugfs_file_put() will signal a completion which is possibly being waited for from debugfs_remove(). Thus, as long as there is a debugfs_file_get() not yet matched by a corresponding debugfs_file_put() around, debugfs_remove() will block. Actual users of debugfs_use_file_start() and -finish() will get converted to the new debugfs_file_get() and debugfs_file_put() by followup patches. Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:48 -06:00
if (d_unlinked(dentry))
return -EIO;
if (!refcount_inc_not_zero(&fsd->active_users))
return -EIO;
return 0;
}
EXPORT_SYMBOL_GPL(debugfs_file_get);
/**
* debugfs_file_put - mark the end of file data access
* @dentry: the dentry object formerly passed to
* debugfs_file_get().
*
* Allow any ongoing concurrent call into debugfs_remove() or
* debugfs_remove_recursive() blocked by a former call to
* debugfs_file_get() to proceed and return to its caller.
*/
void debugfs_file_put(struct dentry *dentry)
{
debugfs: defer debugfs_fsdata allocation to first usage Currently, __debugfs_create_file allocates one struct debugfs_fsdata instance for every file created. However, there are potentially many debugfs file around, most of which are never touched by userspace. Thus, defer the allocations to the first usage, i.e. to the first debugfs_file_get(). A dentry's ->d_fsdata starts out to point to the "real", user provided fops. After a debugfs_fsdata instance has been allocated (and the real fops pointer has been moved over into its ->real_fops member), ->d_fsdata is changed to point to it from then on. The two cases are distinguished by setting BIT(0) for the real fops case. struct debugfs_fsdata's foremost purpose is to track active users and to make debugfs_remove() block until they are done. Since no debugfs_fsdata instance means no active users, make debugfs_remove() return immediately in this case. Take care of possible races between debugfs_file_get() and debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata instance and thus wait for possible active users or debugfs_file_get() must see a dead dentry and return immediately. Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether ->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it. Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually a debugfs_fsdata instance before returning it, otherwise emit a warning. The set of possible error codes returned from debugfs_file_get() has grown from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open() pass the -ENOMEM onwards to their callers. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:54 -06:00
struct debugfs_fsdata *fsd = READ_ONCE(dentry->d_fsdata);
debugfs: implement per-file removal protection Since commit 49d200deaa68 ("debugfs: prevent access to removed files' private data"), accesses to a file's private data are protected from concurrent removal by covering all file_operations with a SRCU read section and sychronizing with those before returning from debugfs_remove() by means of synchronize_srcu(). As pointed out by Johannes Berg, there are debugfs files with forever blocking file_operations. Their corresponding SRCU read side sections would block any debugfs_remove() forever as well, even unrelated ones. This results in a livelock. Because a remover can't cancel any indefinite blocking within foreign files, this is a problem. Resolve this by introducing support for more granular protection on a per-file basis. This is implemented by introducing an 'active_users' refcount_t to the per-file struct debugfs_fsdata state. At file creation time, it is set to one and a debugfs_remove() will drop that initial reference. The new debugfs_file_get() and debugfs_file_put(), intended to be used in place of former debugfs_use_file_start() and debugfs_use_file_finish(), increment and decrement it respectively. Once the count drops to zero, debugfs_file_put() will signal a completion which is possibly being waited for from debugfs_remove(). Thus, as long as there is a debugfs_file_get() not yet matched by a corresponding debugfs_file_put() around, debugfs_remove() will block. Actual users of debugfs_use_file_start() and -finish() will get converted to the new debugfs_file_get() and debugfs_file_put() by followup patches. Fixes: 49d200deaa68 ("debugfs: prevent access to removed files' private data") Reported-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:48 -06:00
if (refcount_dec_and_test(&fsd->active_users))
complete(&fsd->active_users_drained);
}
EXPORT_SYMBOL_GPL(debugfs_file_put);
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
static int open_proxy_open(struct inode *inode, struct file *filp)
{
struct dentry *dentry = F_DENTRY(filp);
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
const struct file_operations *real_fops = NULL;
debugfs: defer debugfs_fsdata allocation to first usage Currently, __debugfs_create_file allocates one struct debugfs_fsdata instance for every file created. However, there are potentially many debugfs file around, most of which are never touched by userspace. Thus, defer the allocations to the first usage, i.e. to the first debugfs_file_get(). A dentry's ->d_fsdata starts out to point to the "real", user provided fops. After a debugfs_fsdata instance has been allocated (and the real fops pointer has been moved over into its ->real_fops member), ->d_fsdata is changed to point to it from then on. The two cases are distinguished by setting BIT(0) for the real fops case. struct debugfs_fsdata's foremost purpose is to track active users and to make debugfs_remove() block until they are done. Since no debugfs_fsdata instance means no active users, make debugfs_remove() return immediately in this case. Take care of possible races between debugfs_file_get() and debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata instance and thus wait for possible active users or debugfs_file_get() must see a dead dentry and return immediately. Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether ->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it. Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually a debugfs_fsdata instance before returning it, otherwise emit a warning. The set of possible error codes returned from debugfs_file_get() has grown from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open() pass the -ENOMEM onwards to their callers. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:54 -06:00
int r;
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
debugfs: defer debugfs_fsdata allocation to first usage Currently, __debugfs_create_file allocates one struct debugfs_fsdata instance for every file created. However, there are potentially many debugfs file around, most of which are never touched by userspace. Thus, defer the allocations to the first usage, i.e. to the first debugfs_file_get(). A dentry's ->d_fsdata starts out to point to the "real", user provided fops. After a debugfs_fsdata instance has been allocated (and the real fops pointer has been moved over into its ->real_fops member), ->d_fsdata is changed to point to it from then on. The two cases are distinguished by setting BIT(0) for the real fops case. struct debugfs_fsdata's foremost purpose is to track active users and to make debugfs_remove() block until they are done. Since no debugfs_fsdata instance means no active users, make debugfs_remove() return immediately in this case. Take care of possible races between debugfs_file_get() and debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata instance and thus wait for possible active users or debugfs_file_get() must see a dead dentry and return immediately. Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether ->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it. Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually a debugfs_fsdata instance before returning it, otherwise emit a warning. The set of possible error codes returned from debugfs_file_get() has grown from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open() pass the -ENOMEM onwards to their callers. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:54 -06:00
r = debugfs_file_get(dentry);
if (r)
return r == -EIO ? -ENOENT : r;
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
real_fops = debugfs_real_fops(filp);
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
real_fops = fops_get(real_fops);
if (!real_fops) {
/* Huh? Module did not clean up after itself at exit? */
WARN(1, "debugfs file owner did not clean up at exit: %pd",
dentry);
r = -ENXIO;
goto out;
}
replace_fops(filp, real_fops);
if (real_fops->open)
r = real_fops->open(inode, filp);
out:
debugfs_file_put(dentry);
debugfs: prevent access to possibly dead file_operations at file open Nothing prevents a dentry found by path lookup before a return of __debugfs_remove() to actually get opened after that return. Now, after the return of __debugfs_remove(), there are no guarantees whatsoever regarding the memory the corresponding inode's file_operations object had been kept in. Since __debugfs_remove() is seldomly invoked, usually from module exit handlers only, the race is hard to trigger and the impact is very low. A discussion of the problem outlined above as well as a suggested solution can be found in the (sub-)thread rooted at http://lkml.kernel.org/g/20130401203445.GA20862@ZenIV.linux.org.uk ("Yet another pipe related oops.") Basically, Greg KH suggests to introduce an intermediate fops and Al Viro points out that a pointer to the original ones may be stored in ->d_fsdata. Follow this line of reasoning: - Add SRCU as a reverse dependency of DEBUG_FS. - Introduce a srcu_struct object for the debugfs subsystem. - In debugfs_create_file(), store a pointer to the original file_operations object in ->d_fsdata. - Make debugfs_remove() and debugfs_remove_recursive() wait for a SRCU grace period after the dentry has been delete()'d and before they return to their callers. - Introduce an intermediate file_operations object named "debugfs_open_proxy_file_operations". It's ->open() functions checks, under the protection of a SRCU read lock, whether the dentry is still alive, i.e. has not been d_delete()'d and if so, tries to acquire a reference on the owning module. On success, it sets the file object's ->f_op to the original file_operations and forwards the ongoing open() call to the original ->open(). - For clarity, rename the former debugfs_file_operations to debugfs_noop_file_operations -- they are in no way canonical. The choice of SRCU over "normal" RCU is justified by the fact, that the former may also be used to protect ->i_private data from going away during the execution of a file's readers and writers which may (and do) sleep. Finally, introduce the fs/debugfs/internal.h header containing some declarations internal to the debugfs implementation. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:13 -06:00
return r;
}
const struct file_operations debugfs_open_proxy_file_operations = {
.open = open_proxy_open,
};
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
#define PROTO(args...) args
#define ARGS(args...) args
#define FULL_PROXY_FUNC(name, ret_type, filp, proto, args) \
static ret_type full_proxy_ ## name(proto) \
{ \
struct dentry *dentry = F_DENTRY(filp); \
const struct file_operations *real_fops; \
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
ret_type r; \
\
r = debugfs_file_get(dentry); \
if (unlikely(r)) \
return r; \
real_fops = debugfs_real_fops(filp); \
r = real_fops->name(args); \
debugfs_file_put(dentry); \
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
return r; \
}
FULL_PROXY_FUNC(llseek, loff_t, filp,
PROTO(struct file *filp, loff_t offset, int whence),
ARGS(filp, offset, whence));
FULL_PROXY_FUNC(read, ssize_t, filp,
PROTO(struct file *filp, char __user *buf, size_t size,
loff_t *ppos),
ARGS(filp, buf, size, ppos));
FULL_PROXY_FUNC(write, ssize_t, filp,
PROTO(struct file *filp, const char __user *buf, size_t size,
loff_t *ppos),
ARGS(filp, buf, size, ppos));
FULL_PROXY_FUNC(unlocked_ioctl, long, filp,
PROTO(struct file *filp, unsigned int cmd, unsigned long arg),
ARGS(filp, cmd, arg));
static __poll_t full_proxy_poll(struct file *filp,
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
struct poll_table_struct *wait)
{
struct dentry *dentry = F_DENTRY(filp);
__poll_t r = 0;
const struct file_operations *real_fops;
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
if (debugfs_file_get(dentry))
return EPOLLHUP;
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
real_fops = debugfs_real_fops(filp);
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
r = real_fops->poll(filp, wait);
debugfs_file_put(dentry);
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
return r;
}
static int full_proxy_release(struct inode *inode, struct file *filp)
{
const struct dentry *dentry = F_DENTRY(filp);
const struct file_operations *real_fops = debugfs_real_fops(filp);
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
const struct file_operations *proxy_fops = filp->f_op;
int r = 0;
/*
* We must not protect this against removal races here: the
* original releaser should be called unconditionally in order
* not to leak any resources. Releasers must not assume that
* ->i_private is still being meaningful here.
*/
if (real_fops->release)
r = real_fops->release(inode, filp);
replace_fops(filp, d_inode(dentry)->i_fop);
kfree((void *)proxy_fops);
fops_put(real_fops);
return r;
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
}
static void __full_proxy_fops_init(struct file_operations *proxy_fops,
const struct file_operations *real_fops)
{
proxy_fops->release = full_proxy_release;
if (real_fops->llseek)
proxy_fops->llseek = full_proxy_llseek;
if (real_fops->read)
proxy_fops->read = full_proxy_read;
if (real_fops->write)
proxy_fops->write = full_proxy_write;
if (real_fops->poll)
proxy_fops->poll = full_proxy_poll;
if (real_fops->unlocked_ioctl)
proxy_fops->unlocked_ioctl = full_proxy_unlocked_ioctl;
}
static int full_proxy_open(struct inode *inode, struct file *filp)
{
struct dentry *dentry = F_DENTRY(filp);
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
const struct file_operations *real_fops = NULL;
struct file_operations *proxy_fops = NULL;
debugfs: defer debugfs_fsdata allocation to first usage Currently, __debugfs_create_file allocates one struct debugfs_fsdata instance for every file created. However, there are potentially many debugfs file around, most of which are never touched by userspace. Thus, defer the allocations to the first usage, i.e. to the first debugfs_file_get(). A dentry's ->d_fsdata starts out to point to the "real", user provided fops. After a debugfs_fsdata instance has been allocated (and the real fops pointer has been moved over into its ->real_fops member), ->d_fsdata is changed to point to it from then on. The two cases are distinguished by setting BIT(0) for the real fops case. struct debugfs_fsdata's foremost purpose is to track active users and to make debugfs_remove() block until they are done. Since no debugfs_fsdata instance means no active users, make debugfs_remove() return immediately in this case. Take care of possible races between debugfs_file_get() and debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata instance and thus wait for possible active users or debugfs_file_get() must see a dead dentry and return immediately. Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether ->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it. Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually a debugfs_fsdata instance before returning it, otherwise emit a warning. The set of possible error codes returned from debugfs_file_get() has grown from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open() pass the -ENOMEM onwards to their callers. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:54 -06:00
int r;
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
debugfs: defer debugfs_fsdata allocation to first usage Currently, __debugfs_create_file allocates one struct debugfs_fsdata instance for every file created. However, there are potentially many debugfs file around, most of which are never touched by userspace. Thus, defer the allocations to the first usage, i.e. to the first debugfs_file_get(). A dentry's ->d_fsdata starts out to point to the "real", user provided fops. After a debugfs_fsdata instance has been allocated (and the real fops pointer has been moved over into its ->real_fops member), ->d_fsdata is changed to point to it from then on. The two cases are distinguished by setting BIT(0) for the real fops case. struct debugfs_fsdata's foremost purpose is to track active users and to make debugfs_remove() block until they are done. Since no debugfs_fsdata instance means no active users, make debugfs_remove() return immediately in this case. Take care of possible races between debugfs_file_get() and debugfs_remove(): either debugfs_remove() must see a debugfs_fsdata instance and thus wait for possible active users or debugfs_file_get() must see a dead dentry and return immediately. Make a dentry's ->d_release(), i.e. debugfs_release_dentry(), check whether ->d_fsdata is actually a debugfs_fsdata instance before kfree()ing it. Similarly, make debugfs_real_fops() check whether ->d_fsdata is actually a debugfs_fsdata instance before returning it, otherwise emit a warning. The set of possible error codes returned from debugfs_file_get() has grown from -EIO to -EIO and -ENOMEM. Make open_proxy_open() and full_proxy_open() pass the -ENOMEM onwards to their callers. Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-30 17:15:54 -06:00
r = debugfs_file_get(dentry);
if (r)
return r == -EIO ? -ENOENT : r;
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
real_fops = debugfs_real_fops(filp);
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
real_fops = fops_get(real_fops);
if (!real_fops) {
/* Huh? Module did not cleanup after itself at exit? */
WARN(1, "debugfs file owner did not clean up at exit: %pd",
dentry);
r = -ENXIO;
goto out;
}
proxy_fops = kzalloc(sizeof(*proxy_fops), GFP_KERNEL);
if (!proxy_fops) {
r = -ENOMEM;
goto free_proxy;
}
__full_proxy_fops_init(proxy_fops, real_fops);
replace_fops(filp, proxy_fops);
if (real_fops->open) {
r = real_fops->open(inode, filp);
if (r) {
replace_fops(filp, d_inode(dentry)->i_fop);
goto free_proxy;
} else if (filp->f_op != proxy_fops) {
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
/* No protection against file removal anymore. */
WARN(1, "debugfs file owner replaced proxy fops: %pd",
dentry);
goto free_proxy;
}
}
goto out;
free_proxy:
kfree(proxy_fops);
fops_put(real_fops);
out:
debugfs_file_put(dentry);
debugfs: prevent access to removed files' private data Upon return of debugfs_remove()/debugfs_remove_recursive(), it might still be attempted to access associated private file data through previously opened struct file objects. If that data has been freed by the caller of debugfs_remove*() in the meanwhile, the reading/writing process would either encounter a fault or, if the memory address in question has been reassigned again, unrelated data structures could get overwritten. However, since debugfs files are seldomly removed, usually from module exit handlers only, the impact is very low. Currently, there are ~1000 call sites of debugfs_create_file() spread throughout the whole tree and touching all of those struct file_operations in order to make them file removal aware by means of checking the result of debugfs_use_file_start() from within their methods is unfeasible. Instead, wrap the struct file_operations by a lifetime managing proxy at file open: - In debugfs_create_file(), the original fops handed in has got stashed away in ->d_fsdata already. - In debugfs_create_file(), install a proxy file_operations factory, debugfs_full_proxy_file_operations, at ->i_fop. This proxy factory has got an ->open() method only. It carries out some lifetime checks and if successful, dynamically allocates and sets up a new struct file_operations proxy at ->f_op. Afterwards, it forwards to the ->open() of the original struct file_operations in ->d_fsdata, if any. The dynamically set up proxy at ->f_op has got a lifetime managing wrapper set for each of the methods defined in the original struct file_operations in ->d_fsdata. Its ->release()er frees the proxy again and forwards to the original ->release(), if any. In order not to mislead the VFS layer, it is strictly necessary to leave those fields blank in the proxy that have been NULL in the original struct file_operations also, i.e. aren't supported. This is why there is a need for dynamically allocated proxies. The choice made not to allocate a proxy instance for every dentry at file creation, but for every struct file object instantiated thereof is justified by the expected usage pattern of debugfs, namely that in general very few files get opened more than once at a time. The wrapper methods set in the struct file_operations implement lifetime managing by means of the SRCU protection facilities already in place for debugfs: They set up a SRCU read side critical section and check whether the dentry is still alive by means of debugfs_use_file_start(). If so, they forward the call to the original struct file_operation stored in ->d_fsdata, still under the protection of the SRCU read side critical section. This SRCU read side critical section prevents any pending debugfs_remove() and friends to return to their callers. Since a file's private data must only be freed after the return of debugfs_remove(), the ongoing proxied call is guarded against any file removal race. If, on the other hand, the initial call to debugfs_use_file_start() detects that the dentry is dead, the wrapper simply returns -EIO and does not forward the call. Note that the ->poll() wrapper is special in that its signature does not allow for the return of arbitrary -EXXX values and thus, POLLHUP is returned here. In order not to pollute debugfs with wrapper definitions that aren't ever needed, I chose not to define a wrapper for every struct file_operations method possible. Instead, a wrapper is defined only for the subset of methods which are actually set by any debugfs users. Currently, these are: ->llseek() ->read() ->write() ->unlocked_ioctl() ->poll() The ->release() wrapper is special in that it does not protect the original ->release() in any way from dead files in order not to leak resources. Thus, any ->release() handed to debugfs must implement file lifetime management manually, if needed. For only 33 out of a total of 434 releasers handed in to debugfs, it could not be verified immediately whether they access data structures that might have been freed upon a debugfs_remove() return in the meanwhile. Export debugfs_use_file_start() and debugfs_use_file_finish() in order to allow any ->release() to manually implement file lifetime management. For a set of common cases of struct file_operations implemented by the debugfs_core itself, future patches will incorporate file lifetime management directly within those in order to allow for their unproxied operation. Rename the original, non-proxying "debugfs_create_file()" to "debugfs_create_file_unsafe()" and keep it for future internal use by debugfs itself. Factor out code common to both into the new __debugfs_create_file(). Signed-off-by: Nicolai Stange <nicstange@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-22 07:11:14 -06:00
return r;
}
const struct file_operations debugfs_full_proxy_file_operations = {
.open = full_proxy_open,
};
ssize_t debugfs_attr_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos)
{
struct dentry *dentry = F_DENTRY(file);
ssize_t ret;
ret = debugfs_file_get(dentry);
if (unlikely(ret))
return ret;
ret = simple_attr_read(file, buf, len, ppos);
debugfs_file_put(dentry);
return ret;
}
EXPORT_SYMBOL_GPL(debugfs_attr_read);
ssize_t debugfs_attr_write(struct file *file, const char __user *buf,
size_t len, loff_t *ppos)
{
struct dentry *dentry = F_DENTRY(file);
ssize_t ret;
ret = debugfs_file_get(dentry);
if (unlikely(ret))
return ret;
ret = simple_attr_write(file, buf, len, ppos);
debugfs_file_put(dentry);
return ret;
}
EXPORT_SYMBOL_GPL(debugfs_attr_write);
static struct dentry *debugfs_create_mode_unsafe(const char *name, umode_t mode,
struct dentry *parent, void *value,
const struct file_operations *fops,
const struct file_operations *fops_ro,
const struct file_operations *fops_wo)
{
/* if there are no write bits set, make read only */
if (!(mode & S_IWUGO))
return debugfs_create_file_unsafe(name, mode, parent, value,
fops_ro);
/* if there are no read bits set, make write only */
if (!(mode & S_IRUGO))
return debugfs_create_file_unsafe(name, mode, parent, value,
fops_wo);
return debugfs_create_file_unsafe(name, mode, parent, value, fops);
}
static int debugfs_u8_set(void *data, u64 val)
{
*(u8 *)data = val;
return 0;
}
static int debugfs_u8_get(void *data, u64 *val)
{
*val = *(u8 *)data;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_u8, debugfs_u8_get, debugfs_u8_set, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_u8_ro, debugfs_u8_get, NULL, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_u8_wo, NULL, debugfs_u8_set, "%llu\n");
/**
* debugfs_create_u8 - create a debugfs file that is used to read and write an unsigned 8-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*
* This function creates a file in debugfs with the given name that
* contains the value of the variable @value. If the @mode variable is so
* set, it can be read from, and written to.
*
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
* %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_u8(const char *name, umode_t mode,
struct dentry *parent, u8 *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_u8,
&fops_u8_ro, &fops_u8_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_u8);
static int debugfs_u16_set(void *data, u64 val)
{
*(u16 *)data = val;
return 0;
}
static int debugfs_u16_get(void *data, u64 *val)
{
*val = *(u16 *)data;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_u16, debugfs_u16_get, debugfs_u16_set, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_u16_ro, debugfs_u16_get, NULL, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_u16_wo, NULL, debugfs_u16_set, "%llu\n");
/**
* debugfs_create_u16 - create a debugfs file that is used to read and write an unsigned 16-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*
* This function creates a file in debugfs with the given name that
* contains the value of the variable @value. If the @mode variable is so
* set, it can be read from, and written to.
*
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
* %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_u16(const char *name, umode_t mode,
struct dentry *parent, u16 *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_u16,
&fops_u16_ro, &fops_u16_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_u16);
static int debugfs_u32_set(void *data, u64 val)
{
*(u32 *)data = val;
return 0;
}
static int debugfs_u32_get(void *data, u64 *val)
{
*val = *(u32 *)data;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_u32, debugfs_u32_get, debugfs_u32_set, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_u32_ro, debugfs_u32_get, NULL, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_u32_wo, NULL, debugfs_u32_set, "%llu\n");
/**
* debugfs_create_u32 - create a debugfs file that is used to read and write an unsigned 32-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*
* This function creates a file in debugfs with the given name that
* contains the value of the variable @value. If the @mode variable is so
* set, it can be read from, and written to.
*
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
* %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_u32(const char *name, umode_t mode,
struct dentry *parent, u32 *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_u32,
&fops_u32_ro, &fops_u32_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_u32);
static int debugfs_u64_set(void *data, u64 val)
{
*(u64 *)data = val;
return 0;
}
static int debugfs_u64_get(void *data, u64 *val)
{
*val = *(u64 *)data;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_u64, debugfs_u64_get, debugfs_u64_set, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_u64_ro, debugfs_u64_get, NULL, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n");
/**
* debugfs_create_u64 - create a debugfs file that is used to read and write an unsigned 64-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*
* This function creates a file in debugfs with the given name that
* contains the value of the variable @value. If the @mode variable is so
* set, it can be read from, and written to.
*
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
* %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_u64(const char *name, umode_t mode,
struct dentry *parent, u64 *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_u64,
&fops_u64_ro, &fops_u64_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_u64);
static int debugfs_ulong_set(void *data, u64 val)
{
*(unsigned long *)data = val;
return 0;
}
static int debugfs_ulong_get(void *data, u64 *val)
{
*val = *(unsigned long *)data;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_ulong, debugfs_ulong_get, debugfs_ulong_set,
"%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_ulong_ro, debugfs_ulong_get, NULL, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_ulong_wo, NULL, debugfs_ulong_set, "%llu\n");
/**
* debugfs_create_ulong - create a debugfs file that is used to read and write
* an unsigned long value.
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*
* This function creates a file in debugfs with the given name that
* contains the value of the variable @value. If the @mode variable is so
* set, it can be read from, and written to.
*
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
* %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_ulong(const char *name, umode_t mode,
struct dentry *parent, unsigned long *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value,
&fops_ulong, &fops_ulong_ro,
&fops_ulong_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_ulong);
DEFINE_DEBUGFS_ATTRIBUTE(fops_x8, debugfs_u8_get, debugfs_u8_set, "0x%02llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x8_ro, debugfs_u8_get, NULL, "0x%02llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x8_wo, NULL, debugfs_u8_set, "0x%02llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x16, debugfs_u16_get, debugfs_u16_set,
"0x%04llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x16_ro, debugfs_u16_get, NULL, "0x%04llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x16_wo, NULL, debugfs_u16_set, "0x%04llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x32, debugfs_u32_get, debugfs_u32_set,
"0x%08llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x32_ro, debugfs_u32_get, NULL, "0x%08llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x32_wo, NULL, debugfs_u32_set, "0x%08llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x64, debugfs_u64_get, debugfs_u64_set,
"0x%016llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x64_ro, debugfs_u64_get, NULL, "0x%016llx\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_x64_wo, NULL, debugfs_u64_set, "0x%016llx\n");
/*
* debugfs_create_x{8,16,32,64} - create a debugfs file that is used to read and write an unsigned {8,16,32,64}-bit value
*
* These functions are exactly the same as the above functions (but use a hex
* output for the decimal challenged). For details look at the above unsigned
* decimal functions.
*/
/**
* debugfs_create_x8 - create a debugfs file that is used to read and write an unsigned 8-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*/
struct dentry *debugfs_create_x8(const char *name, umode_t mode,
struct dentry *parent, u8 *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_x8,
&fops_x8_ro, &fops_x8_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_x8);
/**
* debugfs_create_x16 - create a debugfs file that is used to read and write an unsigned 16-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*/
struct dentry *debugfs_create_x16(const char *name, umode_t mode,
struct dentry *parent, u16 *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_x16,
&fops_x16_ro, &fops_x16_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_x16);
/**
* debugfs_create_x32 - create a debugfs file that is used to read and write an unsigned 32-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*/
struct dentry *debugfs_create_x32(const char *name, umode_t mode,
struct dentry *parent, u32 *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_x32,
&fops_x32_ro, &fops_x32_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_x32);
/**
* debugfs_create_x64 - create a debugfs file that is used to read and write an unsigned 64-bit value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*/
struct dentry *debugfs_create_x64(const char *name, umode_t mode,
struct dentry *parent, u64 *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_x64,
&fops_x64_ro, &fops_x64_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_x64);
static int debugfs_size_t_set(void *data, u64 val)
{
*(size_t *)data = val;
return 0;
}
static int debugfs_size_t_get(void *data, u64 *val)
{
*val = *(size_t *)data;
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_size_t, debugfs_size_t_get, debugfs_size_t_set,
"%llu\n"); /* %llu and %zu are more or less the same */
DEFINE_DEBUGFS_ATTRIBUTE(fops_size_t_ro, debugfs_size_t_get, NULL, "%llu\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_size_t_wo, NULL, debugfs_size_t_set, "%llu\n");
/**
* debugfs_create_size_t - create a debugfs file that is used to read and write an size_t value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*/
struct dentry *debugfs_create_size_t(const char *name, umode_t mode,
struct dentry *parent, size_t *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value,
&fops_size_t, &fops_size_t_ro,
&fops_size_t_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_size_t);
static int debugfs_atomic_t_set(void *data, u64 val)
{
atomic_set((atomic_t *)data, val);
return 0;
}
static int debugfs_atomic_t_get(void *data, u64 *val)
{
*val = atomic_read((atomic_t *)data);
return 0;
}
DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t, debugfs_atomic_t_get,
debugfs_atomic_t_set, "%lld\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t_ro, debugfs_atomic_t_get, NULL,
"%lld\n");
DEFINE_DEBUGFS_ATTRIBUTE(fops_atomic_t_wo, NULL, debugfs_atomic_t_set,
"%lld\n");
/**
* debugfs_create_atomic_t - create a debugfs file that is used to read and
* write an atomic_t value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*/
struct dentry *debugfs_create_atomic_t(const char *name, umode_t mode,
struct dentry *parent, atomic_t *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value,
&fops_atomic_t, &fops_atomic_t_ro,
&fops_atomic_t_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_atomic_t);
ssize_t debugfs_read_file_bool(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
char buf[3];
bool val;
int r;
struct dentry *dentry = F_DENTRY(file);
r = debugfs_file_get(dentry);
if (unlikely(r))
return r;
val = *(bool *)file->private_data;
debugfs_file_put(dentry);
if (val)
buf[0] = 'Y';
else
buf[0] = 'N';
buf[1] = '\n';
buf[2] = 0x00;
return simple_read_from_buffer(user_buf, count, ppos, buf, 2);
}
EXPORT_SYMBOL_GPL(debugfs_read_file_bool);
ssize_t debugfs_write_file_bool(struct file *file, const char __user *user_buf,
size_t count, loff_t *ppos)
{
char buf[32];
size_t buf_size;
bool bv;
int r;
bool *val = file->private_data;
struct dentry *dentry = F_DENTRY(file);
buf_size = min(count, (sizeof(buf)-1));
if (copy_from_user(buf, user_buf, buf_size))
return -EFAULT;
buf[buf_size] = '\0';
if (strtobool(buf, &bv) == 0) {
r = debugfs_file_get(dentry);
if (unlikely(r))
return r;
*val = bv;
debugfs_file_put(dentry);
}
return count;
}
EXPORT_SYMBOL_GPL(debugfs_write_file_bool);
static const struct file_operations fops_bool = {
.read = debugfs_read_file_bool,
.write = debugfs_write_file_bool,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 10:52:59 -06:00
.llseek = default_llseek,
};
static const struct file_operations fops_bool_ro = {
.read = debugfs_read_file_bool,
.open = simple_open,
.llseek = default_llseek,
};
static const struct file_operations fops_bool_wo = {
.write = debugfs_write_file_bool,
.open = simple_open,
.llseek = default_llseek,
};
/**
* debugfs_create_bool - create a debugfs file that is used to read and write a boolean value
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @value: a pointer to the variable that the file should read to and write
* from.
*
* This function creates a file in debugfs with the given name that
* contains the value of the variable @value. If the @mode variable is so
* set, it can be read from, and written to.
*
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
* %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_bool(const char *name, umode_t mode,
struct dentry *parent, bool *value)
{
return debugfs_create_mode_unsafe(name, mode, parent, value, &fops_bool,
&fops_bool_ro, &fops_bool_wo);
}
EXPORT_SYMBOL_GPL(debugfs_create_bool);
static ssize_t read_file_blob(struct file *file, char __user *user_buf,
size_t count, loff_t *ppos)
{
struct debugfs_blob_wrapper *blob = file->private_data;
struct dentry *dentry = F_DENTRY(file);
ssize_t r;
r = debugfs_file_get(dentry);
if (unlikely(r))
return r;
r = simple_read_from_buffer(user_buf, count, ppos, blob->data,
blob->size);
debugfs_file_put(dentry);
return r;
}
static const struct file_operations fops_blob = {
.read = read_file_blob,
.open = simple_open,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-15 10:52:59 -06:00
.llseek = default_llseek,
};
/**
* debugfs_create_blob - create a debugfs file that is used to read a binary blob
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @blob: a pointer to a struct debugfs_blob_wrapper which contains a pointer
* to the blob data and the size of the data.
*
* This function creates a file in debugfs with the given name that exports
* @blob->data as a binary blob. If the @mode variable is so set it can be
* read from. Writing is not supported.
*
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
* %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_blob(const char *name, umode_t mode,
struct dentry *parent,
struct debugfs_blob_wrapper *blob)
{
return debugfs_create_file_unsafe(name, mode, parent, blob, &fops_blob);
}
EXPORT_SYMBOL_GPL(debugfs_create_blob);
struct array_data {
void *array;
u32 elements;
};
static size_t u32_format_array(char *buf, size_t bufsize,
u32 *array, int array_size)
{
size_t ret = 0;
while (--array_size >= 0) {
size_t len;
char term = array_size ? ' ' : '\n';
len = snprintf(buf, bufsize, "%u%c", *array++, term);
ret += len;
buf += len;
bufsize -= len;
}
return ret;
}
static int u32_array_open(struct inode *inode, struct file *file)
{
struct array_data *data = inode->i_private;
int size, elements = data->elements;
char *buf;
/*
* Max size:
* - 10 digits + ' '/'\n' = 11 bytes per number
* - terminating NUL character
*/
size = elements*11;
buf = kmalloc(size+1, GFP_KERNEL);
if (!buf)
return -ENOMEM;
buf[size] = 0;
file->private_data = buf;
u32_format_array(buf, size, data->array, data->elements);
return nonseekable_open(inode, file);
}
static ssize_t u32_array_read(struct file *file, char __user *buf, size_t len,
loff_t *ppos)
{
size_t size = strlen(file->private_data);
return simple_read_from_buffer(buf, len, ppos,
file->private_data, size);
}
static int u32_array_release(struct inode *inode, struct file *file)
{
kfree(file->private_data);
return 0;
}
static const struct file_operations u32_array_fops = {
.owner = THIS_MODULE,
.open = u32_array_open,
.release = u32_array_release,
.read = u32_array_read,
.llseek = no_llseek,
};
/**
* debugfs_create_u32_array - create a debugfs file that is used to read u32
* array.
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have.
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @array: u32 array that provides data.
* @elements: total number of elements in the array.
*
* This function creates a file in debugfs with the given name that exports
* @array as data. If the @mode variable is so set it can be read from.
* Writing is not supported. Seek within the file is also not supported.
* Once array is created its size can not be changed.
*
* The function returns a pointer to dentry on success. If debugfs is not
* enabled in the kernel, the value -%ENODEV will be returned.
*/
struct dentry *debugfs_create_u32_array(const char *name, umode_t mode,
struct dentry *parent,
u32 *array, u32 elements)
{
struct array_data *data = kmalloc(sizeof(*data), GFP_KERNEL);
if (data == NULL)
return NULL;
data->array = array;
data->elements = elements;
return debugfs_create_file_unsafe(name, mode, parent, data,
&u32_array_fops);
}
EXPORT_SYMBOL_GPL(debugfs_create_u32_array);
#ifdef CONFIG_HAS_IOMEM
/*
* The regset32 stuff is used to print 32-bit registers using the
* seq_file utilities. We offer printing a register set in an already-opened
* sequential file or create a debugfs file that only prints a regset32.
*/
/**
* debugfs_print_regs32 - use seq_print to describe a set of registers
* @s: the seq_file structure being used to generate output
* @regs: an array if struct debugfs_reg32 structures
* @nregs: the length of the above array
* @base: the base address to be used in reading the registers
* @prefix: a string to be prefixed to every output line
*
* This function outputs a text block describing the current values of
* some 32-bit hardware registers. It is meant to be used within debugfs
* files based on seq_file that need to show registers, intermixed with other
* information. The prefix argument may be used to specify a leading string,
* because some peripherals have several blocks of identical registers,
* for example configuration of dma channels
*/
void debugfs_print_regs32(struct seq_file *s, const struct debugfs_reg32 *regs,
int nregs, void __iomem *base, char *prefix)
{
int i;
for (i = 0; i < nregs; i++, regs++) {
if (prefix)
seq_printf(s, "%s", prefix);
seq_printf(s, "%s = 0x%08x\n", regs->name,
readl(base + regs->offset));
if (seq_has_overflowed(s))
break;
}
}
EXPORT_SYMBOL_GPL(debugfs_print_regs32);
static int debugfs_show_regset32(struct seq_file *s, void *data)
{
struct debugfs_regset32 *regset = s->private;
debugfs_print_regs32(s, regset->regs, regset->nregs, regset->base, "");
return 0;
}
static int debugfs_open_regset32(struct inode *inode, struct file *file)
{
return single_open(file, debugfs_show_regset32, inode->i_private);
}
static const struct file_operations fops_regset32 = {
.open = debugfs_open_regset32,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
/**
* debugfs_create_regset32 - create a debugfs file that returns register values
* @name: a pointer to a string containing the name of the file to create.
* @mode: the permission that the file should have
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @regset: a pointer to a struct debugfs_regset32, which contains a pointer
* to an array of register definitions, the array size and the base
* address where the register bank is to be found.
*
* This function creates a file in debugfs with the given name that reports
* the names and values of a set of 32-bit registers. If the @mode variable
* is so set it can be read from. Writing is not supported.
*
* This function will return a pointer to a dentry if it succeeds. This
* pointer must be passed to the debugfs_remove() function when the file is
* to be removed (no automatic cleanup happens if your module is unloaded,
* you are responsible here.) If an error occurs, %NULL will be returned.
*
* If debugfs is not enabled in the kernel, the value -%ENODEV will be
* returned. It is not wise to check for this value, but rather, check for
* %NULL or !%NULL instead as to eliminate the need for #ifdef in the calling
* code.
*/
struct dentry *debugfs_create_regset32(const char *name, umode_t mode,
struct dentry *parent,
struct debugfs_regset32 *regset)
{
return debugfs_create_file(name, mode, parent, regset, &fops_regset32);
}
EXPORT_SYMBOL_GPL(debugfs_create_regset32);
#endif /* CONFIG_HAS_IOMEM */
struct debugfs_devm_entry {
int (*read)(struct seq_file *seq, void *data);
struct device *dev;
};
static int debugfs_devm_entry_open(struct inode *inode, struct file *f)
{
struct debugfs_devm_entry *entry = inode->i_private;
return single_open(f, entry->read, entry->dev);
}
static const struct file_operations debugfs_devm_entry_ops = {
.owner = THIS_MODULE,
.open = debugfs_devm_entry_open,
.release = single_release,
.read = seq_read,
.llseek = seq_lseek
};
/**
* debugfs_create_devm_seqfile - create a debugfs file that is bound to device.
*
* @dev: device related to this debugfs file.
* @name: name of the debugfs file.
* @parent: a pointer to the parent dentry for this file. This should be a
* directory dentry if set. If this parameter is %NULL, then the
* file will be created in the root of the debugfs filesystem.
* @read_fn: function pointer called to print the seq_file content.
*/
struct dentry *debugfs_create_devm_seqfile(struct device *dev, const char *name,
struct dentry *parent,
int (*read_fn)(struct seq_file *s,
void *data))
{
struct debugfs_devm_entry *entry;
if (IS_ERR(parent))
return ERR_PTR(-ENOENT);
entry = devm_kzalloc(dev, sizeof(*entry), GFP_KERNEL);
if (!entry)
return ERR_PTR(-ENOMEM);
entry->read = read_fn;
entry->dev = dev;
return debugfs_create_file(name, S_IRUGO, parent, entry,
&debugfs_devm_entry_ops);
}
EXPORT_SYMBOL_GPL(debugfs_create_devm_seqfile);