Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/tools/kvm/kvm_stat/kvm_stat.txt

106 lines
2.2 KiB
Text
Raw Normal View History

tools: Add kvm_stat man page Converted from the Texinfo source in QEMU to asciidoc. The a2x incantation was provided by Janosch Frank. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24 02:41:15 -06:00
kvm_stat(1)
===========
NAME
----
kvm_stat - Report KVM kernel module event counters
SYNOPSIS
--------
[verse]
'kvm_stat' [OPTION]...
DESCRIPTION
-----------
kvm_stat prints counts of KVM kernel module trace events. These events signify
state transitions such as guest mode entry and exit.
This tool is useful for observing guest behavior from the host perspective.
Often conclusions about performance or buggy behavior can be drawn from the
output.
tools/kvm_stat: document list of interactive commands Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:07 -07:00
While running in regular mode, use any of the keys listed in section
'Interactive Commands' below.
Use batch and logging modes for scripting purposes.
tools: Add kvm_stat man page Converted from the Texinfo source in QEMU to asciidoc. The a2x incantation was provided by Janosch Frank. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24 02:41:15 -06:00
The set of KVM kernel module trace events may be specific to the kernel version
or architecture. It is best to check the KVM kernel module source code for the
meaning of events.
tools/kvm_stat: document list of interactive commands Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:07 -07:00
INTERACTIVE COMMANDS
--------------------
[horizontal]
tools/kvm_stat: add new interactive command 'b' Toggle display total number of events by guest (debugfs only). When switching to display of events by guest, field filters remain active. I.e. the number of events per guest reported considers only events matching the filters. Likewise with pid/guest filtering. Note that when switching to display of events by guest, DebugfsProvider remains to collect data for events as it did before, but the read() method summarizes the values by pid. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-25 13:34:16 -06:00
*b*:: toggle events by guests (debugfs only, honors filters)
tools/kvm_stat: add interactive command 'c' Provide a real simple way to erase any active filter. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:14 -07:00
*c*:: clear filter
tools/kvm_stat: document list of interactive commands Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:07 -07:00
*f*:: filter by regular expression
tools/kvm_stat: fix fields filter for child events [ Upstream commit 883d25e70b2f699fed9017e509d1ef8e36229b89 ] The fields filter would not work with child fields, as the respective parents would not be included. No parents displayed == no childs displayed. To reproduce, run on s390 (would work on other platforms, too, but would require a different filter name): - Run 'kvm_stat -d' - Press 'f' - Enter 'instruct' Notice that events like instruction_diag_44 or instruction_diag_500 are not displayed - the output remains empty. With this patch, we will filter by matching events and their parents. However, consider the following example where we filter by instruction_diag_44: kvm statistics - summary regex filter: instruction_diag_44 Event Total %Total CurAvg/s exit_instruction 276 100.0 12 instruction_diag_44 256 92.8 11 Total 276 12 Note that the parent ('exit_instruction') displays the total events, but the childs listed do not match its total (256 instead of 276). This is intended (since we're filtering all but one child), but might be confusing on first sight. Signed-off-by: Stefan Raspl <raspl@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-04-21 07:26:24 -06:00
:: *Note*: Child events pull in their parents, and parents' stats summarize
all child events, not just the filtered ones
tools/kvm_stat: document list of interactive commands Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:07 -07:00
tools/kvm_stat: eliminate extra guest/pid selection dialog We can do with a single dialog that takes both, pids and guest names. Note that we keep both interactive commands, 'p' and 'g' for now, to avoid confusion among users used to a specific key. While at it, we improve on some minor glitches regarding curses usage, e.g. cursor still visible when not supposed to be. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-22 04:16:27 -07:00
*g*:: filter by guest name/PID
tools/kvm_stat: add option '--guest' Add a new option '-g'/'--guest' to select a particular process by providing the QEMU guest name. Notes: - The logic to figure out the pid corresponding to the guest name might look scary, but works pretty reliably in practice; in the unlikely event that it returns add'l flukes, it will bail out and hint at using '-p' instead, no harm done. - Mixing '-g' and '-p' is possible, and the final instance specified on the command line is the significant one. This is consistent with current behavior for '-p' which, if specified multiple times, also regards the final instance as the significant one. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:13 -07:00
tools/kvm_stat: add new interactive command 'h' Display interactive commands reference on 'h'. While at it, sort interactive commands alphabetically in various places. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07 13:08:38 -06:00
*h*:: display interactive commands reference
tools/kvm_stat: add new interactive command 'o' Add new interactive command 'o' to toggle sorting by 'CurAvg/s' (default) and 'Total' columns. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07 13:08:41 -06:00
*o*:: toggle sorting order (Total vs CurAvg/s)
tools/kvm_stat: eliminate extra guest/pid selection dialog We can do with a single dialog that takes both, pids and guest names. Note that we keep both interactive commands, 'p' and 'g' for now, to avoid confusion among users used to a specific key. While at it, we improve on some minor glitches regarding curses usage, e.g. cursor still visible when not supposed to be. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-22 04:16:27 -07:00
*p*:: filter by guest name/PID
tools/kvm_stat: document list of interactive commands Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:07 -07:00
*q*:: quit
tools/kvm_stat: add interactive command 'r' Provide an interactive command to reset the tracepoint statistics. Requires some extra work for debugfs, as the counters cannot be reset. On the up side, this offers us the opportunity to have debugfs values reset on startup and whenever a filter is modified, becoming consistent with the tracepoint provider. As a bonus, 'kvmstat -dt' will now provide useful output, instead of mixing values in totally different orders of magnitude. Furthermore, we avoid unnecessary resets when any of the filters is "changed" interactively to the previous value. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:15 -07:00
*r*:: reset stats
tools/kvm_stat: add new interactive command 's' Add new command 's' to modify the update interval. Limited to a maximum of 25.5 sec and a minimum of 0.1 sec, since curses cannot handle longer and shorter delays respectively. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-07 13:08:39 -06:00
*s*:: set update interval
tools/kvm_stat: document list of interactive commands Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:07 -07:00
*x*:: toggle reporting of stats for child trace events
tools/kvm_stat: fix child trace events accounting Child trace events were included in calculation of the overall total, which is used for calculation of the percentages of the '%Total' column. However, the parent trace envents' stats summarize the child trace events, hence we'd incorrectly account for them twice, leading to slightly wrong stats. With this fix, we use the correct total. Consequently, the sum of the child trace events' '%Total' column values is identical to the respective value of the respective parent event. However, this also means that the sum of the '%Total' column values will aggregate to more than 100 percent. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-11 04:25:23 -07:00
:: *Note*: The stats for the parents summarize the respective child trace
events
tools/kvm_stat: document list of interactive commands Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:07 -07:00
Press any other key to refresh statistics immediately.
tools: Add kvm_stat man page Converted from the Texinfo source in QEMU to asciidoc. The a2x incantation was provided by Janosch Frank. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24 02:41:15 -06:00
OPTIONS
-------
-1::
--once::
--batch::
run in batch mode for one second
-l::
--log::
run in logging mode (like vmstat)
-t::
--tracepoints::
retrieve statistics from tracepoints
-d::
--debugfs::
retrieve statistics from debugfs
tools/kvm_stat: add new command line switch '-i' It might be handy to display the full history of event stats to compare the current event distribution against any available historic data. Since we have that available for debugfs, we offer a respective command line option to display what's available. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-25 13:34:15 -06:00
-i::
--debugfs-include-past::
include all available data on past events for debugfs
tools: kvm_stat: Introduce pid monitoring Having stats for single VMs can help to determine the problem of a VM without the need of running other tools like perf. The tracepoints already allowed pid level monitoring, but kvm_stat didn't have support for it till now. Support for the newly implemented debugfs vm monitoring was also implemented. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-18 05:26:24 -06:00
-p<pid>::
--pid=<pid>::
limit statistics to one virtual machine (pid)
tools/kvm_stat: add option '--guest' Add a new option '-g'/'--guest' to select a particular process by providing the QEMU guest name. Notes: - The logic to figure out the pid corresponding to the guest name might look scary, but works pretty reliably in practice; in the unlikely event that it returns add'l flukes, it will bail out and hint at using '-p' instead, no harm done. - Mixing '-g' and '-p' is possible, and the final instance specified on the command line is the significant one. This is consistent with current behavior for '-p' which, if specified multiple times, also regards the final instance as the significant one. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-10 05:40:13 -07:00
-g<guest>::
--guest=<guest_name>::
limit statistics to one virtual machine (guest name)
tools: Add kvm_stat man page Converted from the Texinfo source in QEMU to asciidoc. The a2x incantation was provided by Janosch Frank. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24 02:41:15 -06:00
-f<fields>::
--fields=<fields>::
tools/kvm_stat: add hint on '-f help' to man page The man page update for this new functionality was omitted. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-12-11 04:25:24 -07:00
fields to display (regex), "-f help" for a list of available events
tools: Add kvm_stat man page Converted from the Texinfo source in QEMU to asciidoc. The a2x incantation was provided by Janosch Frank. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-24 02:41:15 -06:00
-h::
--help::
show help message
SEE ALSO
--------
'perf'(1), 'trace-cmd'(1)
AUTHOR
------
Stefan Hajnoczi <stefanha@redhat.com>
Reference in a new issue Copy permalink