Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/include/asm-sparc64/ttable.h

698 lines
20 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* $Id: ttable.h,v 1.18 2002/02/09 19:49:32 davem Exp $ */
#ifndef _SPARC64_TTABLE_H
#define _SPARC64_TTABLE_H
#include <asm/utrap.h>
#ifdef __ASSEMBLY__
#include <asm/thread_info.h>
#endif
#define BOOT_KERNEL b sparc64_boot; nop; nop; nop; nop; nop; nop; nop;
/* We need a "cleaned" instruction... */
#define CLEAN_WINDOW \
rdpr %cleanwin, %l0; add %l0, 1, %l0; \
wrpr %l0, 0x0, %cleanwin; \
clr %o0; clr %o1; clr %o2; clr %o3; \
clr %o4; clr %o5; clr %o6; clr %o7; \
clr %l0; clr %l1; clr %l2; clr %l3; \
clr %l4; clr %l5; clr %l6; clr %l7; \
retry; \
nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;nop;
#define TRAP(routine) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap; \
109: or %g7, %lo(109b), %g7; \
call routine; \
add %sp, PTREGS_OFF, %o0; \
ba,pt %xcc, rtrap; \
clr %l6; \
nop;
#define TRAP_7INSNS(routine) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap; \
109: or %g7, %lo(109b), %g7; \
call routine; \
add %sp, PTREGS_OFF, %o0; \
ba,pt %xcc, rtrap; \
clr %l6;
#define TRAP_SAVEFPU(routine) \
sethi %hi(109f), %g7; \
ba,pt %xcc, do_fptrap; \
109: or %g7, %lo(109b), %g7; \
call routine; \
add %sp, PTREGS_OFF, %o0; \
ba,pt %xcc, rtrap; \
clr %l6; \
nop;
#define TRAP_NOSAVE(routine) \
ba,pt %xcc, routine; \
nop; \
nop; nop; nop; nop; nop; nop;
#define TRAP_NOSAVE_7INSNS(routine) \
ba,pt %xcc, routine; \
nop; \
nop; nop; nop; nop; nop;
#define TRAPTL1(routine) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etraptl1; \
109: or %g7, %lo(109b), %g7; \
call routine; \
add %sp, PTREGS_OFF, %o0; \
ba,pt %xcc, rtrap; \
clr %l6; \
nop;
#define TRAP_ARG(routine, arg) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap; \
109: or %g7, %lo(109b), %g7; \
add %sp, PTREGS_OFF, %o0; \
call routine; \
mov arg, %o1; \
ba,pt %xcc, rtrap; \
clr %l6;
#define TRAPTL1_ARG(routine, arg) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etraptl1; \
109: or %g7, %lo(109b), %g7; \
add %sp, PTREGS_OFF, %o0; \
call routine; \
mov arg, %o1; \
ba,pt %xcc, rtrap; \
clr %l6;
#define SYSCALL_TRAP(routine, systbl) \
sethi %hi(109f), %g7; \
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
ba,pt %xcc, etrap; \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
109: or %g7, %lo(109b), %g7; \
sethi %hi(systbl), %l7; \
ba,pt %xcc, routine; \
or %l7, %lo(systbl), %l7; \
nop; nop;
#define INDIRECT_SOLARIS_SYSCALL(num) \
sethi %hi(109f), %g7; \
ba,pt %xcc, etrap; \
109: or %g7, %lo(109b), %g7; \
ba,pt %xcc, tl0_solaris + 0xc; \
mov num, %g1; \
nop;nop;nop;
#define TRAP_UTRAP(handler,lvl) \
[SPARC64]: Elminate all usage of hard-coded trap globals. UltraSPARC has special sets of global registers which are switched to for certain trap types. There is one set for MMU related traps, one set of Interrupt Vector processing, and another set (called the Alternate globals) for all other trap types. For what seems like forever we've hard coded the values in some of these trap registers. Some examples include: 1) Interrupt Vector global %g6 holds current processors interrupt work struct where received interrupts are managed for IRQ handler dispatch. 2) MMU global %g7 holds the base of the page tables of the currently active address space. 3) Alternate global %g6 held the current_thread_info() value. Such hardcoding has resulted in some serious issues in many areas. There are some code sequences where having another register available would help clean up the implementation. Taking traps such as cross-calls from the OBP firmware requires some trick code sequences wherein we have to save away and restore all of the special sets of global registers when we enter/exit OBP. We were also using the IMMU TSB register on SMP to hold the per-cpu area base address, which doesn't work any longer now that we actually use the TSB facility of the cpu. The implementation is pretty straight forward. One tricky bit is getting the current processor ID as that is different on different cpu variants. We use a stub with a fancy calling convention which we patch at boot time. The calling convention is that the stub is branched to and the (PC - 4) to return to is in register %g1. The cpu number is left in %g6. This stub can be invoked by using the __GET_CPUID macro. We use an array of per-cpu trap state to store the current thread and physical address of the current address space's page tables. The TRAP_LOAD_THREAD_REG loads %g6 with the current thread from this table, it uses __GET_CPUID and also clobbers %g1. TRAP_LOAD_IRQ_WORK is used by the interrupt vector processing to load the current processor's IRQ software state into %g6. It also uses __GET_CPUID and clobbers %g1. Finally, TRAP_LOAD_PGD_PHYS loads the physical address base of the current address space's page tables into %g7, it clobbers %g1 and uses __GET_CPUID. Many refinements are possible, as well as some tuning, with this stuff in place. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 00:24:22 -07:00
mov handler, %g3; \
ba,pt %xcc, utrap_trap; \
mov lvl, %g4; \
nop; \
nop; \
nop; \
nop; \
nop;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#ifdef CONFIG_SUNOS_EMUL
#define SUNOS_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sunos_sys_table)
#else
#define SUNOS_SYSCALL_TRAP TRAP(sunos_syscall)
#endif
#ifdef CONFIG_COMPAT
#define LINUX_32BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall32, sys_call_table32)
#else
#define LINUX_32BIT_SYSCALL_TRAP BTRAP(0x110)
#endif
#define LINUX_64BIT_SYSCALL_TRAP SYSCALL_TRAP(linux_sparc_syscall, sys_call_table64)
#define GETCC_TRAP TRAP(getcc)
#define SETCC_TRAP TRAP(setcc)
#ifdef CONFIG_SOLARIS_EMUL
#define SOLARIS_SYSCALL_TRAP TRAP(solaris_sparc_syscall)
#else
#define SOLARIS_SYSCALL_TRAP TRAP(solaris_syscall)
#endif
#define BREAKPOINT_TRAP TRAP(breakpoint_trap)
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 14:38:57 -07:00
#ifdef CONFIG_TRACE_IRQFLAGS
#define TRAP_IRQ(routine, level) \
rdpr %pil, %g2; \
wrpr %g0, 15, %pil; \
sethi %hi(1f-4), %g7; \
ba,pt %xcc, etrap_irq; \
or %g7, %lo(1f-4), %g7; \
nop; \
nop; \
nop; \
.subsection 2; \
1: call trace_hardirqs_off; \
nop; \
mov level, %o0; \
call routine; \
add %sp, PTREGS_OFF, %o1; \
ba,a,pt %xcc, rtrap_irq; \
.previous;
#define TICK_SMP_IRQ \
rdpr %pil, %g2; \
wrpr %g0, 15, %pil; \
sethi %hi(1f-4), %g7; \
ba,pt %xcc, etrap_irq; \
or %g7, %lo(1f-4), %g7; \
nop; \
nop; \
nop; \
.subsection 2; \
1: call trace_hardirqs_off; \
nop; \
call smp_percpu_timer_interrupt; \
add %sp, PTREGS_OFF, %o0; \
ba,a,pt %xcc, rtrap_irq; \
.previous;
#else
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#define TRAP_IRQ(routine, level) \
rdpr %pil, %g2; \
wrpr %g0, 15, %pil; \
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 14:38:57 -07:00
ba,pt %xcc, etrap_irq; \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
rd %pc, %g7; \
mov level, %o0; \
call routine; \
add %sp, PTREGS_OFF, %o1; \
ba,a,pt %xcc, rtrap_irq;
#define TICK_SMP_IRQ \
rdpr %pil, %g2; \
wrpr %g0, 15, %pil; \
sethi %hi(109f), %g7; \
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 14:38:57 -07:00
ba,pt %xcc, etrap_irq; \
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
109: or %g7, %lo(109b), %g7; \
call smp_percpu_timer_interrupt; \
add %sp, PTREGS_OFF, %o0; \
ba,a,pt %xcc, rtrap_irq;
[SPARC64]: Add irqtrace/stacktrace/lockdep support. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-11-16 14:38:57 -07:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#define TRAP_IVEC TRAP_NOSAVE(do_ivec)
#define BTRAP(lvl) TRAP_ARG(bad_trap, lvl)
#define BTRAPTL1(lvl) TRAPTL1_ARG(bad_trap_tl1, lvl)
#define FLUSH_WINDOW_TRAP \
ba,pt %xcc, etrap; \
rd %pc, %g7; \
flushw; \
ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %l1; \
add %l1, 4, %l2; \
stx %l1, [%sp + PTREGS_OFF + PT_V9_TPC]; \
ba,pt %xcc, rtrap_clr_l6; \
stx %l2, [%sp + PTREGS_OFF + PT_V9_TNPC];
#ifdef CONFIG_KPROBES
#define KPROBES_TRAP(lvl) TRAP_IRQ(kprobe_trap, lvl)
#else
#define KPROBES_TRAP(lvl) TRAP_ARG(bad_trap, lvl)
#endif
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
#define SUN4V_ITSB_MISS \
ldxa [%g0] ASI_SCRATCHPAD, %g2; \
ldx [%g2 + HV_FAULT_I_ADDR_OFFSET], %g4; \
ldx [%g2 + HV_FAULT_I_CTX_OFFSET], %g5; \
[SPARC64]: More TLB/TSB handling fixes. The SUN4V convention with non-shared TSBs is that the context bit of the TAG is clear. So we have to choose an "invalid" bit and initialize new TSBs appropriately. Otherwise a zero TAG looks "valid". Make sure, for the window fixup cases, that we use the right global registers and that we don't potentially trample on the live global registers in etrap/rtrap handling (%g2 and %g6) and that we put the missing virtual address properly in %g5. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 19:01:02 -07:00
srlx %g4, 22, %g6; \
[SPARC64]: Fix some SUN4V TLB miss bugs. Code patching did not sign extend negative branch offsets correctly. Kernel TLB miss path needs patching and %g4 register preservation in order to handle SUN4V correctly. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-11 13:21:20 -07:00
ba,pt %xcc, sun4v_itsb_miss; \
[SPARC64]: More TLB/TSB handling fixes. The SUN4V convention with non-shared TSBs is that the context bit of the TAG is clear. So we have to choose an "invalid" bit and initialize new TSBs appropriately. Otherwise a zero TAG looks "valid". Make sure, for the window fixup cases, that we use the right global registers and that we don't potentially trample on the live global registers in etrap/rtrap handling (%g2 and %g6) and that we put the missing virtual address properly in %g5. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 19:01:02 -07:00
nop; \
nop; \
[SPARC64]: Fix some SUN4V TLB miss bugs. Code patching did not sign extend negative branch offsets correctly. Kernel TLB miss path needs patching and %g4 register preservation in order to handle SUN4V correctly. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-11 13:21:20 -07:00
nop;
[SPARC64]: Implement sun4v TSB miss handlers. When we register a TSB with the hypervisor, so that it or hardware can handle TLB misses and do the TSB walk for us, the hypervisor traps down to these trap when it incurs a TSB miss. Processing is simple, we load the missing virtual address and context, and do a full page table walk. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 17:12:22 -07:00
[SPARC64]: Fix some SUN4V TLB miss bugs. Code patching did not sign extend negative branch offsets correctly. Kernel TLB miss path needs patching and %g4 register preservation in order to handle SUN4V correctly. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-11 13:21:20 -07:00
#define SUN4V_DTSB_MISS \
[SPARC64]: Use ASI_SCRATCHPAD address 0x0 properly. This is where the virtual address of the fault status area belongs. To set it up we don't make a hypervisor call, instead we call OBP's SUNW,set-trap-table with the real address of the fault status area as the second argument. And right before that call we write the virtual address into ASI_SCRATCHPAD vaddr 0x0. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-10 16:39:51 -07:00
ldxa [%g0] ASI_SCRATCHPAD, %g2; \
ldx [%g2 + HV_FAULT_D_ADDR_OFFSET], %g4; \
ldx [%g2 + HV_FAULT_D_CTX_OFFSET], %g5; \
[SPARC64]: More TLB/TSB handling fixes. The SUN4V convention with non-shared TSBs is that the context bit of the TAG is clear. So we have to choose an "invalid" bit and initialize new TSBs appropriately. Otherwise a zero TAG looks "valid". Make sure, for the window fixup cases, that we use the right global registers and that we don't potentially trample on the live global registers in etrap/rtrap handling (%g2 and %g6) and that we put the missing virtual address properly in %g5. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 19:01:02 -07:00
srlx %g4, 22, %g6; \
[SPARC64]: Fix some SUN4V TLB miss bugs. Code patching did not sign extend negative branch offsets correctly. Kernel TLB miss path needs patching and %g4 register preservation in order to handle SUN4V correctly. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-11 13:21:20 -07:00
ba,pt %xcc, sun4v_dtsb_miss; \
[SPARC64]: More TLB/TSB handling fixes. The SUN4V convention with non-shared TSBs is that the context bit of the TAG is clear. So we have to choose an "invalid" bit and initialize new TSBs appropriately. Otherwise a zero TAG looks "valid". Make sure, for the window fixup cases, that we use the right global registers and that we don't potentially trample on the live global registers in etrap/rtrap handling (%g2 and %g6) and that we put the missing virtual address properly in %g5. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17 19:01:02 -07:00
nop; \
nop; \
[SPARC64]: Fix some SUN4V TLB miss bugs. Code patching did not sign extend negative branch offsets correctly. Kernel TLB miss path needs patching and %g4 register preservation in order to handle SUN4V correctly. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-11 13:21:20 -07:00
nop;
[SPARC64]: Implement sun4v TSB miss handlers. When we register a TSB with the hypervisor, so that it or hardware can handle TLB misses and do the TSB walk for us, the hypervisor traps down to these trap when it incurs a TSB miss. Processing is simple, we load the missing virtual address and context, and do a full page table walk. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-09 17:12:22 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Before touching these macros, you owe it to yourself to go and
* see how arch/sparc64/kernel/winfixup.S works... -DaveM
*
* For the user cases we used to use the %asi register, but
* it turns out that the "wr xxx, %asi" costs ~5 cycles, so
* now we use immediate ASI loads and stores instead. Kudos
* to Greg Onufer for pointing out this performance anomaly.
*
* Further note that we cannot use the g2, g4, g5, and g7 alternate
* globals in the spill routines, check out the save instruction in
* arch/sparc64/kernel/etrap.S to see what I mean about g2, and
* g4/g5 are the globals which are preserved by etrap processing
* for the caller of it. The g7 register is the return pc for
* etrap. Finally, g6 is the current thread register so we cannot
* us it in the spill handlers either. Most of these rules do not
* apply to fill processing, only g6 is not usable.
*/
/* Normal kernel spill */
#define SPILL_0_NORMAL \
stx %l0, [%sp + STACK_BIAS + 0x00]; \
stx %l1, [%sp + STACK_BIAS + 0x08]; \
stx %l2, [%sp + STACK_BIAS + 0x10]; \
stx %l3, [%sp + STACK_BIAS + 0x18]; \
stx %l4, [%sp + STACK_BIAS + 0x20]; \
stx %l5, [%sp + STACK_BIAS + 0x28]; \
stx %l6, [%sp + STACK_BIAS + 0x30]; \
stx %l7, [%sp + STACK_BIAS + 0x38]; \
stx %i0, [%sp + STACK_BIAS + 0x40]; \
stx %i1, [%sp + STACK_BIAS + 0x48]; \
stx %i2, [%sp + STACK_BIAS + 0x50]; \
stx %i3, [%sp + STACK_BIAS + 0x58]; \
stx %i4, [%sp + STACK_BIAS + 0x60]; \
stx %i5, [%sp + STACK_BIAS + 0x68]; \
stx %i6, [%sp + STACK_BIAS + 0x70]; \
stx %i7, [%sp + STACK_BIAS + 0x78]; \
saved; retry; nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; nop; nop; nop;
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
#define SPILL_0_NORMAL_ETRAP \
etrap_kernel_spill: \
stx %l0, [%sp + STACK_BIAS + 0x00]; \
stx %l1, [%sp + STACK_BIAS + 0x08]; \
stx %l2, [%sp + STACK_BIAS + 0x10]; \
stx %l3, [%sp + STACK_BIAS + 0x18]; \
stx %l4, [%sp + STACK_BIAS + 0x20]; \
stx %l5, [%sp + STACK_BIAS + 0x28]; \
stx %l6, [%sp + STACK_BIAS + 0x30]; \
stx %l7, [%sp + STACK_BIAS + 0x38]; \
stx %i0, [%sp + STACK_BIAS + 0x40]; \
stx %i1, [%sp + STACK_BIAS + 0x48]; \
stx %i2, [%sp + STACK_BIAS + 0x50]; \
stx %i3, [%sp + STACK_BIAS + 0x58]; \
stx %i4, [%sp + STACK_BIAS + 0x60]; \
stx %i5, [%sp + STACK_BIAS + 0x68]; \
stx %i6, [%sp + STACK_BIAS + 0x70]; \
stx %i7, [%sp + STACK_BIAS + 0x78]; \
saved; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Normal 64bit spill */
#define SPILL_1_GENERIC(ASI) \
add %sp, STACK_BIAS + 0x00, %g1; \
stxa %l0, [%g1 + %g0] ASI; \
mov 0x08, %g3; \
stxa %l1, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %l2, [%g1 + %g0] ASI; \
stxa %l3, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %l4, [%g1 + %g0] ASI; \
stxa %l5, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %l6, [%g1 + %g0] ASI; \
stxa %l7, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %i0, [%g1 + %g0] ASI; \
stxa %i1, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %i2, [%g1 + %g0] ASI; \
stxa %i3, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %i4, [%g1 + %g0] ASI; \
stxa %i5, [%g1 + %g3] ASI; \
add %g1, 0x10, %g1; \
stxa %i6, [%g1 + %g0] ASI; \
stxa %i7, [%g1 + %g3] ASI; \
saved; \
retry; nop; nop; \
b,a,pt %xcc, spill_fixup_dax; \
b,a,pt %xcc, spill_fixup_mna; \
b,a,pt %xcc, spill_fixup;
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
#define SPILL_1_GENERIC_ETRAP \
etrap_user_spill_64bit: \
stxa %l0, [%sp + STACK_BIAS + 0x00] %asi; \
stxa %l1, [%sp + STACK_BIAS + 0x08] %asi; \
stxa %l2, [%sp + STACK_BIAS + 0x10] %asi; \
stxa %l3, [%sp + STACK_BIAS + 0x18] %asi; \
stxa %l4, [%sp + STACK_BIAS + 0x20] %asi; \
stxa %l5, [%sp + STACK_BIAS + 0x28] %asi; \
stxa %l6, [%sp + STACK_BIAS + 0x30] %asi; \
stxa %l7, [%sp + STACK_BIAS + 0x38] %asi; \
stxa %i0, [%sp + STACK_BIAS + 0x40] %asi; \
stxa %i1, [%sp + STACK_BIAS + 0x48] %asi; \
stxa %i2, [%sp + STACK_BIAS + 0x50] %asi; \
stxa %i3, [%sp + STACK_BIAS + 0x58] %asi; \
stxa %i4, [%sp + STACK_BIAS + 0x60] %asi; \
stxa %i5, [%sp + STACK_BIAS + 0x68] %asi; \
stxa %i6, [%sp + STACK_BIAS + 0x70] %asi; \
stxa %i7, [%sp + STACK_BIAS + 0x78] %asi; \
saved; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; nop; \
nop; nop; nop; nop; \
ba,a,pt %xcc, etrap_spill_fixup_64bit; \
ba,a,pt %xcc, etrap_spill_fixup_64bit; \
ba,a,pt %xcc, etrap_spill_fixup_64bit;
#define SPILL_1_GENERIC_ETRAP_FIXUP \
etrap_spill_fixup_64bit: \
ldub [%g6 + TI_WSAVED], %g1; \
sll %g1, 3, %g3; \
add %g6, %g3, %g3; \
stx %sp, [%g3 + TI_RWIN_SPTRS]; \
sll %g1, 7, %g3; \
add %g6, %g3, %g3; \
stx %l0, [%g3 + TI_REG_WINDOW + 0x00]; \
stx %l1, [%g3 + TI_REG_WINDOW + 0x08]; \
stx %l2, [%g3 + TI_REG_WINDOW + 0x10]; \
stx %l3, [%g3 + TI_REG_WINDOW + 0x18]; \
stx %l4, [%g3 + TI_REG_WINDOW + 0x20]; \
stx %l5, [%g3 + TI_REG_WINDOW + 0x28]; \
stx %l6, [%g3 + TI_REG_WINDOW + 0x30]; \
stx %l7, [%g3 + TI_REG_WINDOW + 0x38]; \
stx %i0, [%g3 + TI_REG_WINDOW + 0x40]; \
stx %i1, [%g3 + TI_REG_WINDOW + 0x48]; \
stx %i2, [%g3 + TI_REG_WINDOW + 0x50]; \
stx %i3, [%g3 + TI_REG_WINDOW + 0x58]; \
stx %i4, [%g3 + TI_REG_WINDOW + 0x60]; \
stx %i5, [%g3 + TI_REG_WINDOW + 0x68]; \
stx %i6, [%g3 + TI_REG_WINDOW + 0x70]; \
stx %i7, [%g3 + TI_REG_WINDOW + 0x78]; \
add %g1, 1, %g1; \
stb %g1, [%g6 + TI_WSAVED]; \
saved; \
rdpr %cwp, %g1; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Normal 32bit spill */
#define SPILL_2_GENERIC(ASI) \
srl %sp, 0, %sp; \
stwa %l0, [%sp + %g0] ASI; \
mov 0x04, %g3; \
stwa %l1, [%sp + %g3] ASI; \
add %sp, 0x08, %g1; \
stwa %l2, [%g1 + %g0] ASI; \
stwa %l3, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %l4, [%g1 + %g0] ASI; \
stwa %l5, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %l6, [%g1 + %g0] ASI; \
stwa %l7, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %i0, [%g1 + %g0] ASI; \
stwa %i1, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %i2, [%g1 + %g0] ASI; \
stwa %i3, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %i4, [%g1 + %g0] ASI; \
stwa %i5, [%g1 + %g3] ASI; \
add %g1, 0x08, %g1; \
stwa %i6, [%g1 + %g0] ASI; \
stwa %i7, [%g1 + %g3] ASI; \
saved; \
retry; nop; nop; \
b,a,pt %xcc, spill_fixup_dax; \
b,a,pt %xcc, spill_fixup_mna; \
b,a,pt %xcc, spill_fixup;
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
#define SPILL_2_GENERIC_ETRAP \
etrap_user_spill_32bit: \
srl %sp, 0, %sp; \
stwa %l0, [%sp + 0x00] %asi; \
stwa %l1, [%sp + 0x04] %asi; \
stwa %l2, [%sp + 0x08] %asi; \
stwa %l3, [%sp + 0x0c] %asi; \
stwa %l4, [%sp + 0x10] %asi; \
stwa %l5, [%sp + 0x14] %asi; \
stwa %l6, [%sp + 0x18] %asi; \
stwa %l7, [%sp + 0x1c] %asi; \
stwa %i0, [%sp + 0x20] %asi; \
stwa %i1, [%sp + 0x24] %asi; \
stwa %i2, [%sp + 0x28] %asi; \
stwa %i3, [%sp + 0x2c] %asi; \
stwa %i4, [%sp + 0x30] %asi; \
stwa %i5, [%sp + 0x34] %asi; \
stwa %i6, [%sp + 0x38] %asi; \
stwa %i7, [%sp + 0x3c] %asi; \
saved; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; \
nop; nop; nop; nop; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit; \
ba,a,pt %xcc, etrap_spill_fixup_32bit;
#define SPILL_2_GENERIC_ETRAP_FIXUP \
etrap_spill_fixup_32bit: \
ldub [%g6 + TI_WSAVED], %g1; \
sll %g1, 3, %g3; \
add %g6, %g3, %g3; \
stx %sp, [%g3 + TI_RWIN_SPTRS]; \
sll %g1, 7, %g3; \
add %g6, %g3, %g3; \
stw %l0, [%g3 + TI_REG_WINDOW + 0x00]; \
stw %l1, [%g3 + TI_REG_WINDOW + 0x04]; \
stw %l2, [%g3 + TI_REG_WINDOW + 0x08]; \
stw %l3, [%g3 + TI_REG_WINDOW + 0x0c]; \
stw %l4, [%g3 + TI_REG_WINDOW + 0x10]; \
stw %l5, [%g3 + TI_REG_WINDOW + 0x14]; \
stw %l6, [%g3 + TI_REG_WINDOW + 0x18]; \
stw %l7, [%g3 + TI_REG_WINDOW + 0x1c]; \
stw %i0, [%g3 + TI_REG_WINDOW + 0x20]; \
stw %i1, [%g3 + TI_REG_WINDOW + 0x24]; \
stw %i2, [%g3 + TI_REG_WINDOW + 0x28]; \
stw %i3, [%g3 + TI_REG_WINDOW + 0x2c]; \
stw %i4, [%g3 + TI_REG_WINDOW + 0x30]; \
stw %i5, [%g3 + TI_REG_WINDOW + 0x34]; \
stw %i6, [%g3 + TI_REG_WINDOW + 0x38]; \
stw %i7, [%g3 + TI_REG_WINDOW + 0x3c]; \
add %g1, 1, %g1; \
stb %g1, [%g6 + TI_WSAVED]; \
saved; \
rdpr %cwp, %g1; \
sub %g1, 2, %g1; \
ba,pt %xcc, etrap_save; \
wrpr %g1, %cwp; \
nop; nop; nop
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#define SPILL_1_NORMAL SPILL_1_GENERIC(ASI_AIUP)
#define SPILL_2_NORMAL SPILL_2_GENERIC(ASI_AIUP)
#define SPILL_3_NORMAL SPILL_0_NORMAL
#define SPILL_4_NORMAL SPILL_0_NORMAL
#define SPILL_5_NORMAL SPILL_0_NORMAL
#define SPILL_6_NORMAL SPILL_0_NORMAL
#define SPILL_7_NORMAL SPILL_0_NORMAL
#define SPILL_0_OTHER SPILL_0_NORMAL
#define SPILL_1_OTHER SPILL_1_GENERIC(ASI_AIUS)
#define SPILL_2_OTHER SPILL_2_GENERIC(ASI_AIUS)
#define SPILL_3_OTHER SPILL_3_NORMAL
#define SPILL_4_OTHER SPILL_4_NORMAL
#define SPILL_5_OTHER SPILL_5_NORMAL
#define SPILL_6_OTHER SPILL_6_NORMAL
#define SPILL_7_OTHER SPILL_7_NORMAL
/* Normal kernel fill */
#define FILL_0_NORMAL \
ldx [%sp + STACK_BIAS + 0x00], %l0; \
ldx [%sp + STACK_BIAS + 0x08], %l1; \
ldx [%sp + STACK_BIAS + 0x10], %l2; \
ldx [%sp + STACK_BIAS + 0x18], %l3; \
ldx [%sp + STACK_BIAS + 0x20], %l4; \
ldx [%sp + STACK_BIAS + 0x28], %l5; \
ldx [%sp + STACK_BIAS + 0x30], %l6; \
ldx [%sp + STACK_BIAS + 0x38], %l7; \
ldx [%sp + STACK_BIAS + 0x40], %i0; \
ldx [%sp + STACK_BIAS + 0x48], %i1; \
ldx [%sp + STACK_BIAS + 0x50], %i2; \
ldx [%sp + STACK_BIAS + 0x58], %i3; \
ldx [%sp + STACK_BIAS + 0x60], %i4; \
ldx [%sp + STACK_BIAS + 0x68], %i5; \
ldx [%sp + STACK_BIAS + 0x70], %i6; \
ldx [%sp + STACK_BIAS + 0x78], %i7; \
restored; retry; nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; nop; nop; nop;
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
#define FILL_0_NORMAL_RTRAP \
kern_rtt_fill: \
rdpr %cwp, %g1; \
sub %g1, 1, %g1; \
wrpr %g1, %cwp; \
ldx [%sp + STACK_BIAS + 0x00], %l0; \
ldx [%sp + STACK_BIAS + 0x08], %l1; \
ldx [%sp + STACK_BIAS + 0x10], %l2; \
ldx [%sp + STACK_BIAS + 0x18], %l3; \
ldx [%sp + STACK_BIAS + 0x20], %l4; \
ldx [%sp + STACK_BIAS + 0x28], %l5; \
ldx [%sp + STACK_BIAS + 0x30], %l6; \
ldx [%sp + STACK_BIAS + 0x38], %l7; \
ldx [%sp + STACK_BIAS + 0x40], %i0; \
ldx [%sp + STACK_BIAS + 0x48], %i1; \
ldx [%sp + STACK_BIAS + 0x50], %i2; \
ldx [%sp + STACK_BIAS + 0x58], %i3; \
ldx [%sp + STACK_BIAS + 0x60], %i4; \
ldx [%sp + STACK_BIAS + 0x68], %i5; \
ldx [%sp + STACK_BIAS + 0x70], %i6; \
ldx [%sp + STACK_BIAS + 0x78], %i7; \
restored; \
add %g1, 1, %g1; \
ba,pt %xcc, kern_rtt_restore; \
wrpr %g1, %cwp; \
nop; nop; nop; nop; nop; \
nop; nop; nop; nop;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Normal 64bit fill */
#define FILL_1_GENERIC(ASI) \
add %sp, STACK_BIAS + 0x00, %g1; \
ldxa [%g1 + %g0] ASI, %l0; \
mov 0x08, %g2; \
mov 0x10, %g3; \
ldxa [%g1 + %g2] ASI, %l1; \
mov 0x18, %g5; \
ldxa [%g1 + %g3] ASI, %l2; \
ldxa [%g1 + %g5] ASI, %l3; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %l4; \
ldxa [%g1 + %g2] ASI, %l5; \
ldxa [%g1 + %g3] ASI, %l6; \
ldxa [%g1 + %g5] ASI, %l7; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %i0; \
ldxa [%g1 + %g2] ASI, %i1; \
ldxa [%g1 + %g3] ASI, %i2; \
ldxa [%g1 + %g5] ASI, %i3; \
add %g1, 0x20, %g1; \
ldxa [%g1 + %g0] ASI, %i4; \
ldxa [%g1 + %g2] ASI, %i5; \
ldxa [%g1 + %g3] ASI, %i6; \
ldxa [%g1 + %g5] ASI, %i7; \
restored; \
retry; nop; nop; nop; nop; \
b,a,pt %xcc, fill_fixup_dax; \
b,a,pt %xcc, fill_fixup_mna; \
b,a,pt %xcc, fill_fixup;
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
#define FILL_1_GENERIC_RTRAP \
user_rtt_fill_64bit: \
ldxa [%sp + STACK_BIAS + 0x00] %asi, %l0; \
ldxa [%sp + STACK_BIAS + 0x08] %asi, %l1; \
ldxa [%sp + STACK_BIAS + 0x10] %asi, %l2; \
ldxa [%sp + STACK_BIAS + 0x18] %asi, %l3; \
ldxa [%sp + STACK_BIAS + 0x20] %asi, %l4; \
ldxa [%sp + STACK_BIAS + 0x28] %asi, %l5; \
ldxa [%sp + STACK_BIAS + 0x30] %asi, %l6; \
ldxa [%sp + STACK_BIAS + 0x38] %asi, %l7; \
ldxa [%sp + STACK_BIAS + 0x40] %asi, %i0; \
ldxa [%sp + STACK_BIAS + 0x48] %asi, %i1; \
ldxa [%sp + STACK_BIAS + 0x50] %asi, %i2; \
ldxa [%sp + STACK_BIAS + 0x58] %asi, %i3; \
ldxa [%sp + STACK_BIAS + 0x60] %asi, %i4; \
ldxa [%sp + STACK_BIAS + 0x68] %asi, %i5; \
ldxa [%sp + STACK_BIAS + 0x70] %asi, %i6; \
ldxa [%sp + STACK_BIAS + 0x78] %asi, %i7; \
ba,pt %xcc, user_rtt_pre_restore; \
restored; \
nop; nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* Normal 32bit fill */
#define FILL_2_GENERIC(ASI) \
srl %sp, 0, %sp; \
lduwa [%sp + %g0] ASI, %l0; \
mov 0x04, %g2; \
mov 0x08, %g3; \
lduwa [%sp + %g2] ASI, %l1; \
mov 0x0c, %g5; \
lduwa [%sp + %g3] ASI, %l2; \
lduwa [%sp + %g5] ASI, %l3; \
add %sp, 0x10, %g1; \
lduwa [%g1 + %g0] ASI, %l4; \
lduwa [%g1 + %g2] ASI, %l5; \
lduwa [%g1 + %g3] ASI, %l6; \
lduwa [%g1 + %g5] ASI, %l7; \
add %g1, 0x10, %g1; \
lduwa [%g1 + %g0] ASI, %i0; \
lduwa [%g1 + %g2] ASI, %i1; \
lduwa [%g1 + %g3] ASI, %i2; \
lduwa [%g1 + %g5] ASI, %i3; \
add %g1, 0x10, %g1; \
lduwa [%g1 + %g0] ASI, %i4; \
lduwa [%g1 + %g2] ASI, %i5; \
lduwa [%g1 + %g3] ASI, %i6; \
lduwa [%g1 + %g5] ASI, %i7; \
restored; \
retry; nop; nop; nop; nop; \
b,a,pt %xcc, fill_fixup_dax; \
b,a,pt %xcc, fill_fixup_mna; \
b,a,pt %xcc, fill_fixup;
[SPARC64]: Refine register window trap handling. When saving and restoing trap state, do the window spill/fill handling inline so that we never trap deeper than 2 trap levels. This is important for chips like Niagara. The window fixup code is massively simplified, and many more improvements are now possible. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-04 01:10:01 -07:00
#define FILL_2_GENERIC_RTRAP \
user_rtt_fill_32bit: \
srl %sp, 0, %sp; \
lduwa [%sp + 0x00] %asi, %l0; \
lduwa [%sp + 0x04] %asi, %l1; \
lduwa [%sp + 0x08] %asi, %l2; \
lduwa [%sp + 0x0c] %asi, %l3; \
lduwa [%sp + 0x10] %asi, %l4; \
lduwa [%sp + 0x14] %asi, %l5; \
lduwa [%sp + 0x18] %asi, %l6; \
lduwa [%sp + 0x1c] %asi, %l7; \
lduwa [%sp + 0x20] %asi, %i0; \
lduwa [%sp + 0x24] %asi, %i1; \
lduwa [%sp + 0x28] %asi, %i2; \
lduwa [%sp + 0x2c] %asi, %i3; \
lduwa [%sp + 0x30] %asi, %i4; \
lduwa [%sp + 0x34] %asi, %i5; \
lduwa [%sp + 0x38] %asi, %i6; \
lduwa [%sp + 0x3c] %asi, %i7; \
ba,pt %xcc, user_rtt_pre_restore; \
restored; \
nop; nop; nop; nop; nop; \
nop; nop; nop; nop; nop; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup; \
ba,a,pt %xcc, user_rtt_fill_fixup;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#define FILL_1_NORMAL FILL_1_GENERIC(ASI_AIUP)
#define FILL_2_NORMAL FILL_2_GENERIC(ASI_AIUP)
#define FILL_3_NORMAL FILL_0_NORMAL
#define FILL_4_NORMAL FILL_0_NORMAL
#define FILL_5_NORMAL FILL_0_NORMAL
#define FILL_6_NORMAL FILL_0_NORMAL
#define FILL_7_NORMAL FILL_0_NORMAL
#define FILL_0_OTHER FILL_0_NORMAL
#define FILL_1_OTHER FILL_1_GENERIC(ASI_AIUS)
#define FILL_2_OTHER FILL_2_GENERIC(ASI_AIUS)
#define FILL_3_OTHER FILL_3_NORMAL
#define FILL_4_OTHER FILL_4_NORMAL
#define FILL_5_OTHER FILL_5_NORMAL
#define FILL_6_OTHER FILL_6_NORMAL
#define FILL_7_OTHER FILL_7_NORMAL
#endif /* !(_SPARC64_TTABLE_H) */
Reference in a new issue Copy permalink