Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/sound/soc/soc-pcm.c

710 lines
20 KiB
C
Raw Normal View History

ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
/*
* soc-pcm.c -- ALSA SoC PCM
*
* Copyright 2005 Wolfson Microelectronics PLC.
* Copyright 2005 Openedhand Ltd.
* Copyright (C) 2010 Slimlogic Ltd.
* Copyright (C) 2010 Texas Instruments Inc.
*
* Authors: Liam Girdwood <lrg@ti.com>
* Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
ASoC: Hold runtime PM references to components of active DAIs Every device that implements runtime power management for DAIs is doing it in pretty much the same way: in the startup callback they take a runtime PM reference and then in the shutdown callback they release that reference, keeping the device active while the DAI is active. Given the frequency with which this is done and the obviousness of the need to keep the device active in this period factor the code out into the core, taking references on the device for each CPU DAI, CODEC DAI and DMA device in the core. As runtime PM is reference counted this shouldn't interfere with any other reference holding by the drivers, and since (in common with the existing implementations) we don't check for errors on enabling it shouldn't matter if the device actually has runtime PM enabled or not. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2011-12-03 13:14:31 -07:00
#include <linux/pm_runtime.h>
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/initval.h>
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
static int soc_pcm_apply_symmetry(struct snd_pcm_substream *substream,
struct snd_soc_dai *soc_dai)
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
int ret;
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
if (!soc_dai->driver->symmetric_rates &&
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
!rtd->dai_link->symmetric_rates)
return 0;
/* This can happen if multiple streams are starting simultaneously -
* the second can need to get its constraints before the first has
* picked a rate. Complain and allow the application to carry on.
*/
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
if (!soc_dai->rate) {
dev_warn(soc_dai->dev,
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
"Not enforcing symmetric_rates due to race\n");
return 0;
}
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
dev_dbg(soc_dai->dev, "Symmetry forces %dHz rate\n", soc_dai->rate);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
ret = snd_pcm_hw_constraint_minmax(substream->runtime,
SNDRV_PCM_HW_PARAM_RATE,
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
soc_dai->rate, soc_dai->rate);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
if (ret < 0) {
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
dev_err(soc_dai->dev,
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
"Unable to apply rate symmetry constraint: %d\n", ret);
return ret;
}
return 0;
}
ASoC: Allow drivers to specify how many bits are significant on a DAI Most devices accept data in formats that don't correspond directly to their internal format. ALSA allows us to set a msbits constraint which tells userspace about this in case it finds it useful (for example, in order to avoid wasting effort dithering bits that will be ignored when raising the sample size of data) so provide a mechanism for drivers to specify the number of bits that are actually significant on a DAI and add the appropriate constraints along with all the others. This is done slightly awkwardly as the constraint is specified per sample size - we loop over every possible sample size, including ones that the device doesn't support and including ones that have fewer bits than are actually used, but this is harmless as the upper layers do the right thing in these cases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-01-16 11:38:51 -07:00
/*
* List of sample sizes that might go over the bus for parameter
* application. There ought to be a wildcard sample size for things
* like the DAC/ADC resolution to use but there isn't right now.
*/
static int sample_sizes[] = {
8, 16, 24, 32,
};
static void soc_pcm_apply_msb(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
int ret, i, bits;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
bits = dai->driver->playback.sig_bits;
else
bits = dai->driver->capture.sig_bits;
if (!bits)
return;
for (i = 0; i < ARRAY_SIZE(sample_sizes); i++) {
ASoC: Don't tell applications about msbits unless we're ignoring input On the off chance that an application both pays attention and gets confused. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-19 11:04:18 -07:00
if (bits >= sample_sizes[i])
continue;
ret = snd_pcm_hw_constraint_msbits(substream->runtime, 0,
sample_sizes[i], bits);
ASoC: Allow drivers to specify how many bits are significant on a DAI Most devices accept data in formats that don't correspond directly to their internal format. ALSA allows us to set a msbits constraint which tells userspace about this in case it finds it useful (for example, in order to avoid wasting effort dithering bits that will be ignored when raising the sample size of data) so provide a mechanism for drivers to specify the number of bits that are actually significant on a DAI and add the appropriate constraints along with all the others. This is done slightly awkwardly as the constraint is specified per sample size - we loop over every possible sample size, including ones that the device doesn't support and including ones that have fewer bits than are actually used, but this is harmless as the upper layers do the right thing in these cases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-01-16 11:38:51 -07:00
if (ret != 0)
dev_warn(dai->dev,
"Failed to set MSB %d/%d: %d\n",
bits, sample_sizes[i], ret);
}
}
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
/*
* Called by ALSA when a PCM substream is opened, the runtime->hw record is
* then initialized and any private data can be allocated. This also calls
* startup for the cpu DAI, platform, machine and codec DAI.
*/
static int soc_pcm_open(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_pcm_runtime *runtime = substream->runtime;
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai_driver *cpu_dai_drv = cpu_dai->driver;
struct snd_soc_dai_driver *codec_dai_drv = codec_dai->driver;
int ret = 0;
ASoC: Hold runtime PM references to components of active DAIs Every device that implements runtime power management for DAIs is doing it in pretty much the same way: in the startup callback they take a runtime PM reference and then in the shutdown callback they release that reference, keeping the device active while the DAI is active. Given the frequency with which this is done and the obviousness of the need to keep the device active in this period factor the code out into the core, taking references on the device for each CPU DAI, CODEC DAI and DMA device in the core. As runtime PM is reference counted this shouldn't interfere with any other reference holding by the drivers, and since (in common with the existing implementations) we don't check for errors on enabling it shouldn't matter if the device actually has runtime PM enabled or not. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2011-12-03 13:14:31 -07:00
pm_runtime_get_sync(cpu_dai->dev);
pm_runtime_get_sync(codec_dai->dev);
pm_runtime_get_sync(platform->dev);
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
/* startup the audio subsystem */
if (cpu_dai->driver->ops->startup) {
ret = cpu_dai->driver->ops->startup(substream, cpu_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: can't open interface %s\n",
cpu_dai->name);
goto out;
}
}
if (platform->driver->ops && platform->driver->ops->open) {
ret = platform->driver->ops->open(substream);
if (ret < 0) {
printk(KERN_ERR "asoc: can't open platform %s\n", platform->name);
goto platform_err;
}
}
if (codec_dai->driver->ops->startup) {
ret = codec_dai->driver->ops->startup(substream, codec_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: can't open codec %s\n",
codec_dai->name);
goto codec_dai_err;
}
}
if (rtd->dai_link->ops && rtd->dai_link->ops->startup) {
ret = rtd->dai_link->ops->startup(substream);
if (ret < 0) {
printk(KERN_ERR "asoc: %s startup failed\n", rtd->dai_link->name);
goto machine_err;
}
}
/* Check that the codec and cpu DAIs are compatible */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
runtime->hw.rate_min =
max(codec_dai_drv->playback.rate_min,
cpu_dai_drv->playback.rate_min);
runtime->hw.rate_max =
min(codec_dai_drv->playback.rate_max,
cpu_dai_drv->playback.rate_max);
runtime->hw.channels_min =
max(codec_dai_drv->playback.channels_min,
cpu_dai_drv->playback.channels_min);
runtime->hw.channels_max =
min(codec_dai_drv->playback.channels_max,
cpu_dai_drv->playback.channels_max);
runtime->hw.formats =
codec_dai_drv->playback.formats & cpu_dai_drv->playback.formats;
runtime->hw.rates =
codec_dai_drv->playback.rates & cpu_dai_drv->playback.rates;
if (codec_dai_drv->playback.rates
& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
runtime->hw.rates |= cpu_dai_drv->playback.rates;
if (cpu_dai_drv->playback.rates
& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
runtime->hw.rates |= codec_dai_drv->playback.rates;
} else {
runtime->hw.rate_min =
max(codec_dai_drv->capture.rate_min,
cpu_dai_drv->capture.rate_min);
runtime->hw.rate_max =
min(codec_dai_drv->capture.rate_max,
cpu_dai_drv->capture.rate_max);
runtime->hw.channels_min =
max(codec_dai_drv->capture.channels_min,
cpu_dai_drv->capture.channels_min);
runtime->hw.channels_max =
min(codec_dai_drv->capture.channels_max,
cpu_dai_drv->capture.channels_max);
runtime->hw.formats =
codec_dai_drv->capture.formats & cpu_dai_drv->capture.formats;
runtime->hw.rates =
codec_dai_drv->capture.rates & cpu_dai_drv->capture.rates;
if (codec_dai_drv->capture.rates
& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
runtime->hw.rates |= cpu_dai_drv->capture.rates;
if (cpu_dai_drv->capture.rates
& (SNDRV_PCM_RATE_KNOT | SNDRV_PCM_RATE_CONTINUOUS))
runtime->hw.rates |= codec_dai_drv->capture.rates;
}
ret = -EINVAL;
snd_pcm_limit_hw_rates(runtime);
if (!runtime->hw.rates) {
printk(KERN_ERR "asoc: %s <-> %s No matching rates\n",
codec_dai->name, cpu_dai->name);
goto config_err;
}
if (!runtime->hw.formats) {
printk(KERN_ERR "asoc: %s <-> %s No matching formats\n",
codec_dai->name, cpu_dai->name);
goto config_err;
}
if (!runtime->hw.channels_min || !runtime->hw.channels_max ||
runtime->hw.channels_min > runtime->hw.channels_max) {
printk(KERN_ERR "asoc: %s <-> %s No matching channels\n",
codec_dai->name, cpu_dai->name);
goto config_err;
}
ASoC: Allow drivers to specify how many bits are significant on a DAI Most devices accept data in formats that don't correspond directly to their internal format. ALSA allows us to set a msbits constraint which tells userspace about this in case it finds it useful (for example, in order to avoid wasting effort dithering bits that will be ignored when raising the sample size of data) so provide a mechanism for drivers to specify the number of bits that are actually significant on a DAI and add the appropriate constraints along with all the others. This is done slightly awkwardly as the constraint is specified per sample size - we loop over every possible sample size, including ones that the device doesn't support and including ones that have fewer bits than are actually used, but this is harmless as the upper layers do the right thing in these cases. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-01-16 11:38:51 -07:00
soc_pcm_apply_msb(substream, codec_dai);
soc_pcm_apply_msb(substream, cpu_dai);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
/* Symmetry only applies if we've already got an active stream. */
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
if (cpu_dai->active) {
ret = soc_pcm_apply_symmetry(substream, cpu_dai);
if (ret != 0)
goto config_err;
}
if (codec_dai->active) {
ret = soc_pcm_apply_symmetry(substream, codec_dai);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
if (ret != 0)
goto config_err;
}
pr_debug("asoc: %s <-> %s info:\n",
codec_dai->name, cpu_dai->name);
pr_debug("asoc: rate mask 0x%x\n", runtime->hw.rates);
pr_debug("asoc: min ch %d max ch %d\n", runtime->hw.channels_min,
runtime->hw.channels_max);
pr_debug("asoc: min rate %d max rate %d\n", runtime->hw.rate_min,
runtime->hw.rate_max);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
cpu_dai->playback_active++;
codec_dai->playback_active++;
} else {
cpu_dai->capture_active++;
codec_dai->capture_active++;
}
cpu_dai->active++;
codec_dai->active++;
rtd->codec->active++;
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_unlock(&rtd->pcm_mutex);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
return 0;
config_err:
if (rtd->dai_link->ops && rtd->dai_link->ops->shutdown)
rtd->dai_link->ops->shutdown(substream);
machine_err:
if (codec_dai->driver->ops->shutdown)
codec_dai->driver->ops->shutdown(substream, codec_dai);
codec_dai_err:
if (platform->driver->ops && platform->driver->ops->close)
platform->driver->ops->close(substream);
platform_err:
if (cpu_dai->driver->ops->shutdown)
cpu_dai->driver->ops->shutdown(substream, cpu_dai);
out:
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_unlock(&rtd->pcm_mutex);
ASoC: Hold runtime PM references to components of active DAIs Every device that implements runtime power management for DAIs is doing it in pretty much the same way: in the startup callback they take a runtime PM reference and then in the shutdown callback they release that reference, keeping the device active while the DAI is active. Given the frequency with which this is done and the obviousness of the need to keep the device active in this period factor the code out into the core, taking references on the device for each CPU DAI, CODEC DAI and DMA device in the core. As runtime PM is reference counted this shouldn't interfere with any other reference holding by the drivers, and since (in common with the existing implementations) we don't check for errors on enabling it shouldn't matter if the device actually has runtime PM enabled or not. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2011-12-03 13:14:31 -07:00
pm_runtime_put(platform->dev);
pm_runtime_put(codec_dai->dev);
pm_runtime_put(cpu_dai->dev);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
return ret;
}
/*
* Power down the audio subsystem pmdown_time msecs after close is called.
* This is to ensure there are no pops or clicks in between any music tracks
* due to DAPM power cycling.
*/
static void close_delayed_work(struct work_struct *work)
{
struct snd_soc_pcm_runtime *rtd =
container_of(work, struct snd_soc_pcm_runtime, delayed_work.work);
struct snd_soc_dai *codec_dai = rtd->codec_dai;
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
pr_debug("pop wq checking: %s status: %s waiting: %s\n",
codec_dai->driver->playback.stream_name,
codec_dai->playback_active ? "active" : "inactive",
codec_dai->pop_wait ? "yes" : "no");
/* are we waiting on this codec DAI stream */
if (codec_dai->pop_wait == 1) {
codec_dai->pop_wait = 0;
snd_soc_dapm_stream_event(rtd,
codec_dai->driver->playback.stream_name,
SND_SOC_DAPM_STREAM_STOP);
}
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_unlock(&rtd->pcm_mutex);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
}
/*
* Called by ALSA when a PCM substream is closed. Private data can be
* freed here. The cpu DAI, codec DAI, machine and platform are also
* shutdown.
*/
ASoC: pcm - rename snd_codec_close() to snd_pcm_close(). Make sure we follow naming convention for all PCM ops. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:59 -06:00
static int soc_pcm_close(struct snd_pcm_substream *substream)
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_codec *codec = rtd->codec;
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
cpu_dai->playback_active--;
codec_dai->playback_active--;
} else {
cpu_dai->capture_active--;
codec_dai->capture_active--;
}
cpu_dai->active--;
codec_dai->active--;
codec->active--;
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
/* clear the corresponding DAIs rate when inactive */
if (!cpu_dai->active)
cpu_dai->rate = 0;
if (!codec_dai->active)
codec_dai->rate = 0;
ASoC: Fix check for symmetric rate enforcement The ASoC core tries to not enforce symmetric rates when two streams open simultaneously. It does so by checking rtd->rate being zero. This works exactly once after booting because it is not set to zero again when the streams close. Fix this by setting rtd->rate when no active stream is left. [This leads to lots of warnings about not enforcing the symmetry in some situations as there's a race in the userspace API where we know we've got two applications but don't know what rates they want to set. -- broonie ] Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-17 01:20:01 -06:00
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
/* Muting the DAC suppresses artifacts caused during digital
* shutdown, for example from stopping clocks.
*/
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
snd_soc_dai_digital_mute(codec_dai, 1);
if (cpu_dai->driver->ops->shutdown)
cpu_dai->driver->ops->shutdown(substream, cpu_dai);
if (codec_dai->driver->ops->shutdown)
codec_dai->driver->ops->shutdown(substream, codec_dai);
if (rtd->dai_link->ops && rtd->dai_link->ops->shutdown)
rtd->dai_link->ops->shutdown(substream);
if (platform->driver->ops && platform->driver->ops->close)
platform->driver->ops->close(substream);
cpu_dai->runtime = NULL;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
ASoC: Remove needless unlikely() There's no point in adding unlikely() annotations outside of hot paths and on systems using these features the annotation will always be wrong (as opposed to being something that only comes up once in a while) so the annotation may even be harmful. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-27 04:11:26 -06:00
if (codec->ignore_pmdown_time ||
rtd->dai_link->ignore_pmdown_time) {
ASoC: core: Add flag to ignore pmdown_time at pcm_close With this flag codec drivers can indicate that it is desired to ignore the pmdown_time for DAPM shutdown sequence when playback stream is stopped. The DAPM sequence will be executed without delay in this case. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-14 05:43:33 -06:00
/* powered down playback stream now */
snd_soc_dapm_stream_event(rtd,
codec_dai->driver->playback.stream_name,
SND_SOC_DAPM_STREAM_STOP);
} else {
/* start delayed pop wq here for playback streams */
codec_dai->pop_wait = 1;
schedule_delayed_work(&rtd->delayed_work,
msecs_to_jiffies(rtd->pmdown_time));
}
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
} else {
/* capture streams can be powered down now */
snd_soc_dapm_stream_event(rtd,
codec_dai->driver->capture.stream_name,
SND_SOC_DAPM_STREAM_STOP);
}
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_unlock(&rtd->pcm_mutex);
ASoC: Hold runtime PM references to components of active DAIs Every device that implements runtime power management for DAIs is doing it in pretty much the same way: in the startup callback they take a runtime PM reference and then in the shutdown callback they release that reference, keeping the device active while the DAI is active. Given the frequency with which this is done and the obviousness of the need to keep the device active in this period factor the code out into the core, taking references on the device for each CPU DAI, CODEC DAI and DMA device in the core. As runtime PM is reference counted this shouldn't interfere with any other reference holding by the drivers, and since (in common with the existing implementations) we don't check for errors on enabling it shouldn't matter if the device actually has runtime PM enabled or not. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
2011-12-03 13:14:31 -07:00
pm_runtime_put(platform->dev);
pm_runtime_put(codec_dai->dev);
pm_runtime_put(cpu_dai->dev);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
return 0;
}
/*
* Called by ALSA when the PCM substream is prepared, can set format, sample
* rate, etc. This function is non atomic and can be called multiple times,
* it can refer to the runtime info.
*/
static int soc_pcm_prepare(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
int ret = 0;
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
if (rtd->dai_link->ops && rtd->dai_link->ops->prepare) {
ret = rtd->dai_link->ops->prepare(substream);
if (ret < 0) {
printk(KERN_ERR "asoc: machine prepare error\n");
goto out;
}
}
if (platform->driver->ops && platform->driver->ops->prepare) {
ret = platform->driver->ops->prepare(substream);
if (ret < 0) {
printk(KERN_ERR "asoc: platform prepare error\n");
goto out;
}
}
if (codec_dai->driver->ops->prepare) {
ret = codec_dai->driver->ops->prepare(substream, codec_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: codec DAI prepare error\n");
goto out;
}
}
if (cpu_dai->driver->ops->prepare) {
ret = cpu_dai->driver->ops->prepare(substream, cpu_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: cpu DAI prepare error\n");
goto out;
}
}
/* cancel any delayed stream shutdown that is pending */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
codec_dai->pop_wait) {
codec_dai->pop_wait = 0;
cancel_delayed_work(&rtd->delayed_work);
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
snd_soc_dapm_stream_event(rtd,
codec_dai->driver->playback.stream_name,
SND_SOC_DAPM_STREAM_START);
else
snd_soc_dapm_stream_event(rtd,
codec_dai->driver->capture.stream_name,
SND_SOC_DAPM_STREAM_START);
snd_soc_dai_digital_mute(codec_dai, 0);
out:
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_unlock(&rtd->pcm_mutex);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
return ret;
}
/*
* Called by ALSA when the hardware params are set by application. This
* function can also be called multiple times and can allocate buffers
* (using snd_pcm_lib_* ). It's non-atomic.
*/
static int soc_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
int ret = 0;
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
if (rtd->dai_link->ops && rtd->dai_link->ops->hw_params) {
ret = rtd->dai_link->ops->hw_params(substream, params);
if (ret < 0) {
printk(KERN_ERR "asoc: machine hw_params failed\n");
goto out;
}
}
if (codec_dai->driver->ops->hw_params) {
ret = codec_dai->driver->ops->hw_params(substream, params, codec_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: can't set codec %s hw params\n",
codec_dai->name);
goto codec_err;
}
}
if (cpu_dai->driver->ops->hw_params) {
ret = cpu_dai->driver->ops->hw_params(substream, params, cpu_dai);
if (ret < 0) {
printk(KERN_ERR "asoc: interface %s hw params failed\n",
cpu_dai->name);
goto interface_err;
}
}
if (platform->driver->ops && platform->driver->ops->hw_params) {
ret = platform->driver->ops->hw_params(substream, params);
if (ret < 0) {
printk(KERN_ERR "asoc: platform %s hw params failed\n",
platform->name);
goto platform_err;
}
}
ASoC: soc-core: symmetry checking for each DAIs separately The orginal code does not cover the case that one DAI such as codec may be shared between other two DAIs(CPU). When do symmetry checking, altough the codec DAI requires symmetry, the two CPU DAIs may still be configured to run on different rates. We change to check each DAI's state separately instead of only checking the dai link to prevent this issue. Signed-off-by: Dong Aisheng <b29396@freescale.com> Tested-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-29 03:15:14 -06:00
/* store the rate for each DAIs */
cpu_dai->rate = params_rate(params);
codec_dai->rate = params_rate(params);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
out:
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_unlock(&rtd->pcm_mutex);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
return ret;
platform_err:
if (cpu_dai->driver->ops->hw_free)
cpu_dai->driver->ops->hw_free(substream, cpu_dai);
interface_err:
if (codec_dai->driver->ops->hw_free)
codec_dai->driver->ops->hw_free(substream, codec_dai);
codec_err:
if (rtd->dai_link->ops && rtd->dai_link->ops->hw_free)
rtd->dai_link->ops->hw_free(substream);
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_unlock(&rtd->pcm_mutex);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
return ret;
}
/*
* Frees resources allocated by hw_params, can be called multiple times
*/
static int soc_pcm_hw_free(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_codec *codec = rtd->codec;
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_lock_nested(&rtd->pcm_mutex, rtd->pcm_subclass);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
/* apply codec digital mute */
if (!codec->active)
snd_soc_dai_digital_mute(codec_dai, 1);
/* free any machine hw params */
if (rtd->dai_link->ops && rtd->dai_link->ops->hw_free)
rtd->dai_link->ops->hw_free(substream);
/* free any DMA resources */
if (platform->driver->ops && platform->driver->ops->hw_free)
platform->driver->ops->hw_free(substream);
/* now free hw params for the DAIs */
if (codec_dai->driver->ops->hw_free)
codec_dai->driver->ops->hw_free(substream, codec_dai);
if (cpu_dai->driver->ops->hw_free)
cpu_dai->driver->ops->hw_free(substream, cpu_dai);
ASoC: core - PCM mutex per rtd In preparation for the new ASoC Dynamic PCM support (AKA DSP support). The new ASoC Dynamic PCM core allows DAIs to be dynamically re-routed at runtime between the PCM device end (or Frontend - FE) and the physical DAI (Backend - BE) using regular kcontrols (just like a hardware CODEC routes audio in the analog domain). The Dynamic PCM core therefore must be able to call PCM operations for both the Frontend and Backend(s) DAIs at the same time. Currently we have a global pcm_mutex that is used to serialise the ASoC PCM operations. This patch removes the global mutex and adds a mutex per RTD allowing the PCM operations to be reentrant and allow control of more than one DAI at at time. e.g. a frontend PCM hw_params() could configure multiple backend DAI hw_params() with similar or different hw parameters at the same time. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 10:04:39 -06:00
mutex_unlock(&rtd->pcm_mutex);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
return 0;
}
static int soc_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
int ret;
if (codec_dai->driver->ops->trigger) {
ret = codec_dai->driver->ops->trigger(substream, cmd, codec_dai);
if (ret < 0)
return ret;
}
if (platform->driver->ops && platform->driver->ops->trigger) {
ret = platform->driver->ops->trigger(substream, cmd);
if (ret < 0)
return ret;
}
if (cpu_dai->driver->ops->trigger) {
ret = cpu_dai->driver->ops->trigger(substream, cmd, cpu_dai);
if (ret < 0)
return ret;
}
return 0;
}
/*
* soc level wrapper for pointer callback
* If cpu_dai, codec_dai, platform driver has the delay callback, than
* the runtime->delay will be updated accordingly.
*/
static snd_pcm_uframes_t soc_pcm_pointer(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_uframes_t offset = 0;
snd_pcm_sframes_t delay = 0;
if (platform->driver->ops && platform->driver->ops->pointer)
offset = platform->driver->ops->pointer(substream);
if (cpu_dai->driver->ops->delay)
delay += cpu_dai->driver->ops->delay(substream, cpu_dai);
if (codec_dai->driver->ops->delay)
delay += codec_dai->driver->ops->delay(substream, codec_dai);
if (platform->driver->delay)
delay += platform->driver->delay(substream, codec_dai);
runtime->delay = delay;
return offset;
}
/* create a new pcm */
int soc_new_pcm(struct snd_soc_pcm_runtime *rtd, int num)
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_platform *platform = rtd->platform;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
ASoC: soc-pcm: Allocate PCM operations dynamically to support multiple DAIs The original code does not cover the case that two DAIs(CPU) have different ASoC core PCM operations(like mmap, pointer...). Currently we have only one global soc_pcm_ops for ASoC core PCM operation. When two DAIs have different pointer functions, second DAI's pointer function is set for both first DAI and second DAI in case of original code. This patch uses runtime's pcm_ops instead of global pcm_ops for each DAIs. So each DAIs can have different ASoC core PCM operations. This is needed to support multiple DAIs. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02 01:15:10 -07:00
struct snd_pcm_ops *soc_pcm_ops = &rtd->ops;
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
struct snd_pcm *pcm;
char new_name[64];
int ret = 0, playback = 0, capture = 0;
ASoC: soc-pcm: Allocate PCM operations dynamically to support multiple DAIs The original code does not cover the case that two DAIs(CPU) have different ASoC core PCM operations(like mmap, pointer...). Currently we have only one global soc_pcm_ops for ASoC core PCM operation. When two DAIs have different pointer functions, second DAI's pointer function is set for both first DAI and second DAI in case of original code. This patch uses runtime's pcm_ops instead of global pcm_ops for each DAIs. So each DAIs can have different ASoC core PCM operations. This is needed to support multiple DAIs. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02 01:15:10 -07:00
soc_pcm_ops->open = soc_pcm_open;
soc_pcm_ops->close = soc_pcm_close;
soc_pcm_ops->hw_params = soc_pcm_hw_params;
soc_pcm_ops->hw_free = soc_pcm_hw_free;
soc_pcm_ops->prepare = soc_pcm_prepare;
soc_pcm_ops->trigger = soc_pcm_trigger;
soc_pcm_ops->pointer = soc_pcm_pointer;
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
/* check client and interface hw capabilities */
snprintf(new_name, sizeof(new_name), "%s %s-%d",
rtd->dai_link->stream_name, codec_dai->name, num);
if (codec_dai->driver->playback.channels_min)
playback = 1;
if (codec_dai->driver->capture.channels_min)
capture = 1;
dev_dbg(rtd->card->dev, "registered pcm #%d %s\n",num,new_name);
ret = snd_pcm_new(rtd->card->snd_card, new_name,
num, playback, capture, &pcm);
if (ret < 0) {
printk(KERN_ERR "asoc: can't create pcm for codec %s\n", codec->name);
return ret;
}
/* DAPM dai link stream work */
INIT_DELAYED_WORK(&rtd->delayed_work, close_delayed_work);
rtd->pcm = pcm;
pcm->private_data = rtd;
if (platform->driver->ops) {
ASoC: soc-pcm: Allocate PCM operations dynamically to support multiple DAIs The original code does not cover the case that two DAIs(CPU) have different ASoC core PCM operations(like mmap, pointer...). Currently we have only one global soc_pcm_ops for ASoC core PCM operation. When two DAIs have different pointer functions, second DAI's pointer function is set for both first DAI and second DAI in case of original code. This patch uses runtime's pcm_ops instead of global pcm_ops for each DAIs. So each DAIs can have different ASoC core PCM operations. This is needed to support multiple DAIs. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02 01:15:10 -07:00
soc_pcm_ops->mmap = platform->driver->ops->mmap;
soc_pcm_ops->pointer = platform->driver->ops->pointer;
soc_pcm_ops->ioctl = platform->driver->ops->ioctl;
soc_pcm_ops->copy = platform->driver->ops->copy;
soc_pcm_ops->silence = platform->driver->ops->silence;
soc_pcm_ops->ack = platform->driver->ops->ack;
soc_pcm_ops->page = platform->driver->ops->page;
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
}
if (playback)
ASoC: soc-pcm: Allocate PCM operations dynamically to support multiple DAIs The original code does not cover the case that two DAIs(CPU) have different ASoC core PCM operations(like mmap, pointer...). Currently we have only one global soc_pcm_ops for ASoC core PCM operation. When two DAIs have different pointer functions, second DAI's pointer function is set for both first DAI and second DAI in case of original code. This patch uses runtime's pcm_ops instead of global pcm_ops for each DAIs. So each DAIs can have different ASoC core PCM operations. This is needed to support multiple DAIs. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02 01:15:10 -07:00
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_PLAYBACK, soc_pcm_ops);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
if (capture)
ASoC: soc-pcm: Allocate PCM operations dynamically to support multiple DAIs The original code does not cover the case that two DAIs(CPU) have different ASoC core PCM operations(like mmap, pointer...). Currently we have only one global soc_pcm_ops for ASoC core PCM operation. When two DAIs have different pointer functions, second DAI's pointer function is set for both first DAI and second DAI in case of original code. This patch uses runtime's pcm_ops instead of global pcm_ops for each DAIs. So each DAIs can have different ASoC core PCM operations. This is needed to support multiple DAIs. Signed-off-by: Sangsu Park <sangsu4u.park@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-01-02 01:15:10 -07:00
snd_pcm_set_ops(pcm, SNDRV_PCM_STREAM_CAPTURE, soc_pcm_ops);
ASoC: core - Separate out PCM operations into new file. In preparation for Dynamic PCM support (AKA DSP support). There will be future patches that add support to allow PCMs to be dynamically routed to multiple DAIs at startup and also during stream runtime. This patch moves the ASoC core PCM operaitions into a new file called soc-pcm.c. This will in simplify the ASoC core features into distinct files. Signed-off-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-06-09 07:45:53 -06:00
if (platform->driver->pcm_new) {
ret = platform->driver->pcm_new(rtd);
if (ret < 0) {
pr_err("asoc: platform pcm constructor failed\n");
return ret;
}
}
pcm->private_free = platform->driver->pcm_free;
printk(KERN_INFO "asoc: %s <-> %s mapping ok\n", codec_dai->name,
cpu_dai->name);
return ret;
}
Reference in a new issue Copy permalink