Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/powerpc/kvm/book3s_segment.S

282 lines
6.6 KiB
ArmAsm
Raw Normal View History

KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, version 2, as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
*
* Copyright SUSE Linux Products GmbH 2010
*
* Authors: Alexander Graf <agraf@suse.de>
*/
/* Real mode helpers */
#if defined(CONFIG_PPC_BOOK3S_64)
#define GET_SHADOW_VCPU(reg) \
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
mr reg, r13
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
#elif defined(CONFIG_PPC_BOOK3S_32)
#define GET_SHADOW_VCPU(reg) \
tophys(reg, r2); \
lwz reg, (THREAD + THREAD_KVM_SVCPU)(reg); \
tophys(reg, reg)
#endif
/* Disable for nested KVM */
#define USE_QUICK_LAST_INST
/* Get helper functions for subarch specific functionality */
#if defined(CONFIG_PPC_BOOK3S_64)
#include "book3s_64_slb.S"
#elif defined(CONFIG_PPC_BOOK3S_32)
#include "book3s_32_sr.S"
#endif
/******************************************************************************
* *
* Entry code *
* *
*****************************************************************************/
.global kvmppc_handler_trampoline_enter
kvmppc_handler_trampoline_enter:
/* Required state:
*
* MSR = ~IR|DR
* R13 = PACA
* R1 = host R1
* R2 = host R2
* R10 = guest MSR
* all other volatile GPRS = free
* SVCPU[CR] = guest CR
* SVCPU[XER] = guest XER
* SVCPU[CTR] = guest CTR
* SVCPU[LR] = guest LR
*/
/* r3 = shadow vcpu */
GET_SHADOW_VCPU(r3)
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
/* Save R1/R2 in the PACA (64-bit) or shadow_vcpu (32-bit) */
PPC_STL r1, HSTATE_HOST_R1(r3)
PPC_STL r2, HSTATE_HOST_R2(r3)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* Move SRR0 and SRR1 into the respective regs */
PPC_LL r9, SVCPU_PC(r3)
mtsrr0 r9
mtsrr1 r10
/* Activate guest mode, so faults get handled by KVM */
li r11, KVM_GUEST_MODE_GUEST
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
stb r11, HSTATE_IN_GUEST(r3)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* Switch to guest segment. This is subarch specific. */
LOAD_GUEST_SEGMENTS
/* Enter guest */
KVM: PPC: Add support for Book3S processors in hypervisor mode This adds support for KVM running on 64-bit Book 3S processors, specifically POWER7, in hypervisor mode. Using hypervisor mode means that the guest can use the processor's supervisor mode. That means that the guest can execute privileged instructions and access privileged registers itself without trapping to the host. This gives excellent performance, but does mean that KVM cannot emulate a processor architecture other than the one that the hardware implements. This code assumes that the guest is running paravirtualized using the PAPR (Power Architecture Platform Requirements) interface, which is the interface that IBM's PowerVM hypervisor uses. That means that existing Linux distributions that run on IBM pSeries machines will also run under KVM without modification. In order to communicate the PAPR hypercalls to qemu, this adds a new KVM_EXIT_PAPR_HCALL exit code to include/linux/kvm.h. Currently the choice between book3s_hv support and book3s_pr support (i.e. the existing code, which runs the guest in user mode) has to be made at kernel configuration time, so a given kernel binary can only do one or the other. This new book3s_hv code doesn't support MMIO emulation at present. Since we are running paravirtualized guests, this isn't a serious restriction. With the guest running in supervisor mode, most exceptions go straight to the guest. We will never get data or instruction storage or segment interrupts, alignment interrupts, decrementer interrupts, program interrupts, single-step interrupts, etc., coming to the hypervisor from the guest. Therefore this introduces a new KVMTEST_NONHV macro for the exception entry path so that we don't have to do the KVM test on entry to those exception handlers. We do however get hypervisor decrementer, hypervisor data storage, hypervisor instruction storage, and hypervisor emulation assist interrupts, so we have to handle those. In hypervisor mode, real-mode accesses can access all of RAM, not just a limited amount. Therefore we put all the guest state in the vcpu.arch and use the shadow_vcpu in the PACA only for temporary scratch space. We allocate the vcpu with kzalloc rather than vzalloc, and we don't use anything in the kvmppc_vcpu_book3s struct, so we don't allocate it. We don't have a shared page with the guest, but we still need a kvm_vcpu_arch_shared struct to store the values of various registers, so we include one in the vcpu_arch struct. The POWER7 processor has a restriction that all threads in a core have to be in the same partition. MMU-on kernel code counts as a partition (partition 0), so we have to do a partition switch on every entry to and exit from the guest. At present we require the host and guest to run in single-thread mode because of this hardware restriction. This code allocates a hashed page table for the guest and initializes it with HPTEs for the guest's Virtual Real Memory Area (VRMA). We require that the guest memory is allocated using 16MB huge pages, in order to simplify the low-level memory management. This also means that we can get away without tracking paging activity in the host for now, since huge pages can't be paged or swapped. This also adds a few new exports needed by the book3s_hv code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:21:34 -06:00
PPC_LL r4, SVCPU_CTR(r3)
PPC_LL r5, SVCPU_LR(r3)
lwz r6, SVCPU_CR(r3)
lwz r7, SVCPU_XER(r3)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
mtctr r4
mtlr r5
mtcr r6
mtxer r7
KVM: PPC: Add support for Book3S processors in hypervisor mode This adds support for KVM running on 64-bit Book 3S processors, specifically POWER7, in hypervisor mode. Using hypervisor mode means that the guest can use the processor's supervisor mode. That means that the guest can execute privileged instructions and access privileged registers itself without trapping to the host. This gives excellent performance, but does mean that KVM cannot emulate a processor architecture other than the one that the hardware implements. This code assumes that the guest is running paravirtualized using the PAPR (Power Architecture Platform Requirements) interface, which is the interface that IBM's PowerVM hypervisor uses. That means that existing Linux distributions that run on IBM pSeries machines will also run under KVM without modification. In order to communicate the PAPR hypercalls to qemu, this adds a new KVM_EXIT_PAPR_HCALL exit code to include/linux/kvm.h. Currently the choice between book3s_hv support and book3s_pr support (i.e. the existing code, which runs the guest in user mode) has to be made at kernel configuration time, so a given kernel binary can only do one or the other. This new book3s_hv code doesn't support MMIO emulation at present. Since we are running paravirtualized guests, this isn't a serious restriction. With the guest running in supervisor mode, most exceptions go straight to the guest. We will never get data or instruction storage or segment interrupts, alignment interrupts, decrementer interrupts, program interrupts, single-step interrupts, etc., coming to the hypervisor from the guest. Therefore this introduces a new KVMTEST_NONHV macro for the exception entry path so that we don't have to do the KVM test on entry to those exception handlers. We do however get hypervisor decrementer, hypervisor data storage, hypervisor instruction storage, and hypervisor emulation assist interrupts, so we have to handle those. In hypervisor mode, real-mode accesses can access all of RAM, not just a limited amount. Therefore we put all the guest state in the vcpu.arch and use the shadow_vcpu in the PACA only for temporary scratch space. We allocate the vcpu with kzalloc rather than vzalloc, and we don't use anything in the kvmppc_vcpu_book3s struct, so we don't allocate it. We don't have a shared page with the guest, but we still need a kvm_vcpu_arch_shared struct to store the values of various registers, so we include one in the vcpu_arch struct. The POWER7 processor has a restriction that all threads in a core have to be in the same partition. MMU-on kernel code counts as a partition (partition 0), so we have to do a partition switch on every entry to and exit from the guest. At present we require the host and guest to run in single-thread mode because of this hardware restriction. This code allocates a hashed page table for the guest and initializes it with HPTEs for the guest's Virtual Real Memory Area (VRMA). We require that the guest memory is allocated using 16MB huge pages, in order to simplify the low-level memory management. This also means that we can get away without tracking paging activity in the host for now, since huge pages can't be paged or swapped. This also adds a few new exports needed by the book3s_hv code. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:21:34 -06:00
PPC_LL r0, SVCPU_R0(r3)
PPC_LL r1, SVCPU_R1(r3)
PPC_LL r2, SVCPU_R2(r3)
PPC_LL r4, SVCPU_R4(r3)
PPC_LL r5, SVCPU_R5(r3)
PPC_LL r6, SVCPU_R6(r3)
PPC_LL r7, SVCPU_R7(r3)
PPC_LL r8, SVCPU_R8(r3)
PPC_LL r9, SVCPU_R9(r3)
PPC_LL r10, SVCPU_R10(r3)
PPC_LL r11, SVCPU_R11(r3)
PPC_LL r12, SVCPU_R12(r3)
PPC_LL r13, SVCPU_R13(r3)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
PPC_LL r3, (SVCPU_R3)(r3)
RFI
kvmppc_handler_trampoline_enter_end:
/******************************************************************************
* *
* Exit code *
* *
*****************************************************************************/
.global kvmppc_handler_trampoline_exit
kvmppc_handler_trampoline_exit:
powerpc, KVM: Rework KVM checks in first-level interrupt handlers Instead of branching out-of-line with the DO_KVM macro to check if we are in a KVM guest at the time of an interrupt, this moves the KVM check inline in the first-level interrupt handlers. This speeds up the non-KVM case and makes sure that none of the interrupt handlers are missing the check. Because the first-level interrupt handlers are now larger, some things had to be move out of line in exceptions-64s.S. This all necessitated some minor changes to the interrupt entry code in KVM. This also streamlines the book3s_32 KVM test. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:18:26 -06:00
.global kvmppc_interrupt
kvmppc_interrupt:
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* Register usage at this point:
*
* SPRG_SCRATCH0 = guest R13
* R12 = exit handler id
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
* R13 = shadow vcpu (32-bit) or PACA (64-bit)
* HSTATE.SCRATCH0 = guest R12
* HSTATE.SCRATCH1 = guest CR
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
*
*/
/* Save registers */
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
PPC_STL r0, SVCPU_R0(r13)
PPC_STL r1, SVCPU_R1(r13)
PPC_STL r2, SVCPU_R2(r13)
PPC_STL r3, SVCPU_R3(r13)
PPC_STL r4, SVCPU_R4(r13)
PPC_STL r5, SVCPU_R5(r13)
PPC_STL r6, SVCPU_R6(r13)
PPC_STL r7, SVCPU_R7(r13)
PPC_STL r8, SVCPU_R8(r13)
PPC_STL r9, SVCPU_R9(r13)
PPC_STL r10, SVCPU_R10(r13)
PPC_STL r11, SVCPU_R11(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* Restore R1/R2 so we can handle faults */
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
PPC_LL r1, HSTATE_HOST_R1(r13)
PPC_LL r2, HSTATE_HOST_R2(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* Save guest PC and MSR */
powerpc, KVM: Rework KVM checks in first-level interrupt handlers Instead of branching out-of-line with the DO_KVM macro to check if we are in a KVM guest at the time of an interrupt, this moves the KVM check inline in the first-level interrupt handlers. This speeds up the non-KVM case and makes sure that none of the interrupt handlers are missing the check. Because the first-level interrupt handlers are now larger, some things had to be move out of line in exceptions-64s.S. This all necessitated some minor changes to the interrupt entry code in KVM. This also streamlines the book3s_32 KVM test. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:18:26 -06:00
#ifdef CONFIG_PPC64
BEGIN_FTR_SECTION
powerpc: Base support for exceptions using HSRR0/1 Pass the register type to the prolog, also provides alternate "HV" version of hardware interrupt (0x500) and adjust LPES accordingly We tag those interrupts by setting bit 0x2 in the trap number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-04 22:20:31 -06:00
andi. r0,r12,0x2
beq 1f
mfspr r3,SPRN_HSRR0
mfspr r4,SPRN_HSRR1
andi. r12,r12,0x3ffd
b 2f
powerpc, KVM: Split HVMODE_206 cpu feature bit into separate HV and architecture bits This replaces the single CPU_FTR_HVMODE_206 bit with two bits, one to indicate that we have a usable hypervisor mode, and another to indicate that the processor conforms to PowerISA version 2.06. We also add another bit to indicate that the processor conforms to ISA version 2.01 and set that for PPC970 and derivatives. Some PPC970 chips (specifically those in Apple machines) have a hypervisor mode in that MSR[HV] is always 1, but the hypervisor mode is not useful in the sense that there is no way to run any code in supervisor mode (HV=0 PR=0). On these processors, the LPES0 and LPES1 bits in HID4 are always 0, and we use that as a way of detecting that hypervisor mode is not useful. Where we have a feature section in assembly code around code that only applies on POWER7 in hypervisor mode, we use a construct like END_FTR_SECTION_IFSET(CPU_FTR_HVMODE | CPU_FTR_ARCH_206) The definition of END_FTR_SECTION_IFSET is such that the code will be enabled (not overwritten with nops) only if all bits in the provided mask are set. Note that the CPU feature check in __tlbie() only needs to check the ARCH_206 bit, not the HVMODE bit, because __tlbie() can only get called if we are running bare-metal, i.e. in hypervisor mode. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:26:11 -06:00
END_FTR_SECTION_IFSET(CPU_FTR_HVMODE)
powerpc, KVM: Rework KVM checks in first-level interrupt handlers Instead of branching out-of-line with the DO_KVM macro to check if we are in a KVM guest at the time of an interrupt, this moves the KVM check inline in the first-level interrupt handlers. This speeds up the non-KVM case and makes sure that none of the interrupt handlers are missing the check. Because the first-level interrupt handlers are now larger, some things had to be move out of line in exceptions-64s.S. This all necessitated some minor changes to the interrupt entry code in KVM. This also streamlines the book3s_32 KVM test. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:18:26 -06:00
#endif
powerpc: Base support for exceptions using HSRR0/1 Pass the register type to the prolog, also provides alternate "HV" version of hardware interrupt (0x500) and adjust LPES accordingly We tag those interrupts by setting bit 0x2 in the trap number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-04 22:20:31 -06:00
1: mfsrr0 r3
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
mfsrr1 r4
powerpc: Base support for exceptions using HSRR0/1 Pass the register type to the prolog, also provides alternate "HV" version of hardware interrupt (0x500) and adjust LPES accordingly We tag those interrupts by setting bit 0x2 in the trap number Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-04 22:20:31 -06:00
2:
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
PPC_STL r3, SVCPU_PC(r13)
PPC_STL r4, SVCPU_SHADOW_SRR1(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* Get scratch'ed off registers */
powerpc: Always use SPRN_SPRG_HSCRATCH0 when running in HV mode This uses feature sections to arrange that we always use HSPRG1 as the scratch register in the interrupt entry code rather than SPRG2 when we're running in hypervisor mode on POWER7. This will ensure that we don't trash the guest's SPRG2 when we are running KVM guests. To simplify the code, we define GET_SCRATCH0() and SET_SCRATCH0() macros like the GET_PACA/SET_PACA macros. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-04 21:59:58 -06:00
GET_SCRATCH0(r9)
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
PPC_LL r8, HSTATE_SCRATCH0(r13)
lwz r7, HSTATE_SCRATCH1(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
PPC_STL r9, SVCPU_R13(r13)
PPC_STL r8, SVCPU_R12(r13)
stw r7, SVCPU_CR(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* Save more register state */
mfxer r5
mfdar r6
mfdsisr r7
mfctr r8
mflr r9
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
stw r5, SVCPU_XER(r13)
PPC_STL r6, SVCPU_FAULT_DAR(r13)
stw r7, SVCPU_FAULT_DSISR(r13)
PPC_STL r8, SVCPU_CTR(r13)
PPC_STL r9, SVCPU_LR(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/*
* In order for us to easily get the last instruction,
* we got the #vmexit at, we exploit the fact that the
* virtual layout is still the same here, so we can just
* ld from the guest's PC address
*/
/* We only load the last instruction when it's safe */
cmpwi r12, BOOK3S_INTERRUPT_DATA_STORAGE
beq ld_last_inst
cmpwi r12, BOOK3S_INTERRUPT_PROGRAM
beq ld_last_inst
KVM: PPC: Read out syscall instruction on trap We have a few traps where we cache the instruction that cause the trap for analysis later on. Since we now need to be able to distinguish between SC 0 and SC 1 system calls and the only way to find out which is which is by looking at the instruction, we also read out the instruction causing the system call. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-08-08 08:11:36 -06:00
cmpwi r12, BOOK3S_INTERRUPT_SYSCALL
beq ld_last_prev_inst
KVM: PPC: Make Alignment interrupts work again In the process of merging Book3S_32 and 64 I somehow ended up having the alignment interrupt handler take last_inst, but the fetching code not fetching it. So we ended up with stale last_inst values. Let's just enable last_inst fetching for alignment interrupts too. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-19 18:49:49 -06:00
cmpwi r12, BOOK3S_INTERRUPT_ALIGNMENT
beq- ld_last_inst
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
b no_ld_last_inst
KVM: PPC: Read out syscall instruction on trap We have a few traps where we cache the instruction that cause the trap for analysis later on. Since we now need to be able to distinguish between SC 0 and SC 1 system calls and the only way to find out which is which is by looking at the instruction, we also read out the instruction causing the system call. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-08-08 08:11:36 -06:00
ld_last_prev_inst:
addi r3, r3, -4
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
ld_last_inst:
/* Save off the guest instruction we're at */
/* In case lwz faults */
li r0, KVM_INST_FETCH_FAILED
#ifdef USE_QUICK_LAST_INST
/* Set guest mode to 'jump over instruction' so if lwz faults
* we'll just continue at the next IP. */
li r9, KVM_GUEST_MODE_SKIP
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
stb r9, HSTATE_IN_GUEST(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* 1) enable paging for data */
mfmsr r9
ori r11, r9, MSR_DR /* Enable paging for data */
mtmsr r11
sync
/* 2) fetch the instruction */
lwz r0, 0(r3)
/* 3) disable paging again */
mtmsr r9
sync
#endif
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
stw r0, SVCPU_LAST_INST(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
no_ld_last_inst:
/* Unset guest mode */
li r9, KVM_GUEST_MODE_NONE
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
stb r9, HSTATE_IN_GUEST(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
/* Switch back to host MMU */
LOAD_HOST_SEGMENTS
/* Register usage at this point:
*
* R1 = host R1
* R2 = host R2
* R12 = exit handler id
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
* R13 = shadow vcpu (32-bit) or PACA (64-bit)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
* SVCPU.* = guest *
*
*/
/* RFI into the highmem handler */
mfmsr r7
ori r7, r7, MSR_IR|MSR_DR|MSR_RI|MSR_ME /* Enable paging */
mtsrr1 r7
/* Load highmem handler address */
KVM: PPC: Split host-state fields out of kvmppc_book3s_shadow_vcpu There are several fields in struct kvmppc_book3s_shadow_vcpu that temporarily store bits of host state while a guest is running, rather than anything relating to the particular guest or vcpu. This splits them out into a new kvmppc_host_state structure and modifies the definitions in asm-offsets.c to suit. On 32-bit, we have a kvmppc_host_state structure inside the kvmppc_book3s_shadow_vcpu since the assembly code needs to be able to get to them both with one pointer. On 64-bit they are separate fields in the PACA. This means that on 64-bit we don't need to copy the kvmppc_host_state in and out on vcpu load/unload, and in future will mean that the book3s_hv code doesn't need a shadow_vcpu struct in the PACA at all. That does mean that we have to be careful not to rely on any values persisting in the hstate field of the paca across any point where we could block or get preempted. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-06-28 18:20:58 -06:00
PPC_LL r8, HSTATE_VMHANDLER(r13)
KVM: PPC: Add generic segment switching code This is the code that will later be used instead of book3s_64_slb.S. It does the last step of guest entry and the first generic steps of guest exiting, once we have determined the interrupt is a KVM interrupt. It also reads the last used instruction from the guest virtual address space if necessary, to speed up that path. The new thing about this file is that it makes use of generic long load and store functions and calls a macro to fill in the actual segment switching code. That still needs to be done differently for book3s_32 and book3s_64. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-15 16:11:35 -06:00
mtsrr0 r8
RFI
kvmppc_handler_trampoline_exit_end:
Reference in a new issue Copy permalink