kernel-fxtec-pro1x/drivers/media/video/tuner-core.c

1268 lines
32 KiB
C
Raw Normal View History

/*
*
* i2c tv tuner chip device driver
* core core, i.e. kernel interfaces, registering and so on
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/i2c.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/videodev.h>
#include <media/tuner.h>
#include <media/tuner-types.h>
#include <media/v4l2-common.h>
#include <media/v4l2-i2c-drv-legacy.h>
#include "mt20xx.h"
#include "tda8290.h"
#include "tea5761.h"
#include "tea5767.h"
#include "tuner-xc2028.h"
#include "tuner-simple.h"
#include "tda9887.h"
#include "xc5000.h"
#define UNSET (-1U)
#define PREFIX t->i2c->driver->driver.name
struct tuner {
/* device */
struct dvb_frontend fe;
struct i2c_client *i2c;
struct list_head list;
unsigned int using_v4l2:1;
/* keep track of the current settings */
v4l2_std_id std;
unsigned int tv_freq;
unsigned int radio_freq;
unsigned int audmode;
unsigned int mode;
unsigned int mode_mask; /* Combination of allowable modes */
unsigned int type; /* chip type id */
unsigned int config;
int (*tuner_callback) (void *dev, int command, int arg);
};
/* standard i2c insmod options */
static unsigned short normal_i2c[] = {
#if defined(CONFIG_TUNER_TEA5761) || (defined(CONFIG_TUNER_TEA5761_MODULE) && defined(MODULE))
0x10,
#endif
0x42, 0x43, 0x4a, 0x4b, /* tda8290 */
0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
I2C_CLIENT_END
};
I2C_CLIENT_INSMOD;
/* insmod options used at init time => read/only */
static unsigned int addr = 0;
static unsigned int no_autodetect = 0;
[PATCH] V4L: Miscellaneous fixes - Fixed some bttv card numbers. - BTTV and SAA7134 version numbers incremented to reflect changes. - pci_dma_supported() is called after pci_set_dma_mask() which already did check that for us. This patch removes the unneeded call to pci_dma_supported() at bttv-driver.c - Ensure a sufficient I2C bus idle time between 2 messages for saa7134-i2c.c - It is important to write at first to MO_GP3_IO for cx88-tvaudio.c - Use try_to_freeze() instead of refrigerator at msp3400.c - Recognizing the MFPE05-2 Tuner at tveeprom.c - Add new parameter to help identify radio chipsets at tuner module: show_i2c=1 will show 16 reading bytes from detected tuners. - BTTV does generate some Unimplemented IOCTL log at tuner module: 0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending MSP3400 calls to non-msp3400 tuners. Warning eliminated. VIDIOSAUDIO is also called, so debug messages updated. It is still requiring IOCTL implementation. - Added two more tuners. - Add support for the SVideo input on the GDI Black Gold. Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Graham Bevan <graham.bevan@ntlworld.com> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-31 23:34:43 -06:00
static unsigned int show_i2c = 0;
/* insmod options used at runtime => read/write */
static int tuner_debug;
#define tuner_warn(fmt, arg...) do { \
printk(KERN_WARNING "%s %d-%04x: " fmt, PREFIX, \
i2c_adapter_id(t->i2c->adapter), \
t->i2c->addr, ##arg); \
} while (0)
#define tuner_info(fmt, arg...) do { \
printk(KERN_INFO "%s %d-%04x: " fmt, PREFIX, \
i2c_adapter_id(t->i2c->adapter), \
t->i2c->addr, ##arg); \
} while (0)
#define tuner_err(fmt, arg...) do { \
printk(KERN_ERR "%s %d-%04x: " fmt, PREFIX, \
i2c_adapter_id(t->i2c->adapter), \
t->i2c->addr, ##arg); \
} while (0)
#define tuner_dbg(fmt, arg...) do { \
if (tuner_debug) \
printk(KERN_DEBUG "%s %d-%04x: " fmt, PREFIX, \
i2c_adapter_id(t->i2c->adapter), \
t->i2c->addr, ##arg); \
} while (0)
/* ------------------------------------------------------------------------ */
static unsigned int tv_range[2] = { 44, 958 };
static unsigned int radio_range[2] = { 65, 108 };
static char pal[] = "--";
static char secam[] = "--";
static char ntsc[] = "-";
module_param(addr, int, 0444);
module_param(no_autodetect, int, 0444);
module_param(show_i2c, int, 0444);
module_param_named(debug,tuner_debug, int, 0644);
module_param_string(pal, pal, sizeof(pal), 0644);
module_param_string(secam, secam, sizeof(secam), 0644);
module_param_string(ntsc, ntsc, sizeof(ntsc), 0644);
module_param_array(tv_range, int, NULL, 0644);
module_param_array(radio_range, int, NULL, 0644);
MODULE_DESCRIPTION("device driver for various TV and TV+FM radio tuners");
MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer");
MODULE_LICENSE("GPL");
/* ---------------------------------------------------------------------- */
static void fe_set_params(struct dvb_frontend *fe,
struct analog_parameters *params)
{
struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops;
struct tuner *t = fe->analog_demod_priv;
if (NULL == fe_tuner_ops->set_analog_params) {
tuner_warn("Tuner frontend module has no way to set freq\n");
return;
}
fe_tuner_ops->set_analog_params(fe, params);
}
static void fe_release(struct dvb_frontend *fe)
{
if (fe->ops.tuner_ops.release)
fe->ops.tuner_ops.release(fe);
/* DO NOT kfree(fe->analog_demod_priv)
*
* If we are in this function, analog_demod_priv contains a pointer
* to struct tuner *t. This will be kfree'd in tuner_detach().
*
* Otherwise, fe->ops.analog_demod_ops->release will
* handle the cleanup for analog demodulator modules.
*/
fe->analog_demod_priv = NULL;
}
static void fe_standby(struct dvb_frontend *fe)
{
struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops;
if (fe_tuner_ops->sleep)
fe_tuner_ops->sleep(fe);
}
static int fe_has_signal(struct dvb_frontend *fe)
{
u16 strength = 0;
if (fe->ops.tuner_ops.get_rf_strength)
fe->ops.tuner_ops.get_rf_strength(fe, &strength);
return strength;
}
static int fe_set_config(struct dvb_frontend *fe, void *priv_cfg)
{
struct dvb_tuner_ops *fe_tuner_ops = &fe->ops.tuner_ops;
struct tuner *t = fe->analog_demod_priv;
if (fe_tuner_ops->set_config)
return fe_tuner_ops->set_config(fe, priv_cfg);
tuner_warn("Tuner frontend module has no way to set config\n");
return 0;
}
static void tuner_status(struct dvb_frontend *fe);
static struct analog_demod_ops tuner_core_ops = {
.set_params = fe_set_params,
.standby = fe_standby,
.release = fe_release,
.has_signal = fe_has_signal,
.set_config = fe_set_config,
.tuner_status = tuner_status
};
/* Set tuner frequency, freq in Units of 62.5kHz = 1/16MHz */
static void set_tv_freq(struct i2c_client *c, unsigned int freq)
{
struct tuner *t = i2c_get_clientdata(c);
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
struct analog_parameters params = {
.mode = t->mode,
.audmode = t->audmode,
.std = t->std
};
if (t->type == UNSET) {
tuner_warn ("tuner type not set\n");
return;
}
if (NULL == analog_ops->set_params) {
tuner_warn ("Tuner has no way to set tv freq\n");
return;
}
if (freq < tv_range[0] * 16 || freq > tv_range[1] * 16) {
tuner_dbg ("TV freq (%d.%02d) out of range (%d-%d)\n",
freq / 16, freq % 16 * 100 / 16, tv_range[0],
tv_range[1]);
/* V4L2 spec: if the freq is not possible then the closest
possible value should be selected */
if (freq < tv_range[0] * 16)
freq = tv_range[0] * 16;
else
freq = tv_range[1] * 16;
}
params.frequency = freq;
analog_ops->set_params(&t->fe, &params);
}
static void set_radio_freq(struct i2c_client *c, unsigned int freq)
{
struct tuner *t = i2c_get_clientdata(c);
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
struct analog_parameters params = {
.mode = t->mode,
.audmode = t->audmode,
.std = t->std
};
if (t->type == UNSET) {
tuner_warn ("tuner type not set\n");
return;
}
if (NULL == analog_ops->set_params) {
tuner_warn ("tuner has no way to set radio frequency\n");
return;
}
if (freq < radio_range[0] * 16000 || freq > radio_range[1] * 16000) {
tuner_dbg ("radio freq (%d.%02d) out of range (%d-%d)\n",
freq / 16000, freq % 16000 * 100 / 16000,
radio_range[0], radio_range[1]);
/* V4L2 spec: if the freq is not possible then the closest
possible value should be selected */
if (freq < radio_range[0] * 16000)
freq = radio_range[0] * 16000;
else
freq = radio_range[1] * 16000;
}
params.frequency = freq;
analog_ops->set_params(&t->fe, &params);
}
static void set_freq(struct i2c_client *c, unsigned long freq)
{
struct tuner *t = i2c_get_clientdata(c);
switch (t->mode) {
case V4L2_TUNER_RADIO:
tuner_dbg("radio freq set to %lu.%02lu\n",
freq / 16000, freq % 16000 * 100 / 16000);
set_radio_freq(c, freq);
t->radio_freq = freq;
break;
case V4L2_TUNER_ANALOG_TV:
case V4L2_TUNER_DIGITAL_TV:
tuner_dbg("tv freq set to %lu.%02lu\n",
freq / 16, freq % 16 * 100 / 16);
set_tv_freq(c, freq);
t->tv_freq = freq;
break;
default:
tuner_dbg("freq set: unknown mode: 0x%04x!\n",t->mode);
}
}
V4L/DVB (6126): tuner: add warning for obsolete i2c address range 0x64 thru 0x6f The tuner module has a rather aggressive range of possible i2c addresses. As per the specs available, it appears as if there are no 4-byte tuners that actually use i2c addresses in the range 0x64 thru 0x6f, yet, tuner-core claims the address range 0x60 thru 0x6f. Allowing tuner.ko to probe these addresses can cause potential damage to certain IR receivers, RTC chips or any other IC's that might otherwise reside on the i2c bus using one of these addresses. The plan is to remove these i2c addresses from the i2c address range of the tuner module. If any devices are discovered that actually do have tuners at one of these addresses, the newer i2c probing methods will be used to handle those cases. In order to collect this information and avoid any potential regressions, the following warning has been added upon successful detection of a tuner using an i2c address in the range 0x64 thru 0x6f: ====================== WARNING! ====================== Support for tuners in i2c address range 0x64 thru 0x6f will soon be dropped. This message indicates that your hardware has a {tuner name} tuner at i2c address {addr}. To ensure continued support for your device, please send a copy of this message, along with full dmesg output to v4l-dvb-maintainer@linuxtv.org Please use subject line: "obsolete tuner i2c address." ====================== WARNING! ====================== Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 14:20:42 -06:00
static void tuner_i2c_address_check(struct tuner *t)
{
if ((t->type == UNSET || t->type == TUNER_ABSENT) ||
((t->i2c->addr < 0x64) || (t->i2c->addr > 0x6f)))
V4L/DVB (6126): tuner: add warning for obsolete i2c address range 0x64 thru 0x6f The tuner module has a rather aggressive range of possible i2c addresses. As per the specs available, it appears as if there are no 4-byte tuners that actually use i2c addresses in the range 0x64 thru 0x6f, yet, tuner-core claims the address range 0x60 thru 0x6f. Allowing tuner.ko to probe these addresses can cause potential damage to certain IR receivers, RTC chips or any other IC's that might otherwise reside on the i2c bus using one of these addresses. The plan is to remove these i2c addresses from the i2c address range of the tuner module. If any devices are discovered that actually do have tuners at one of these addresses, the newer i2c probing methods will be used to handle those cases. In order to collect this information and avoid any potential regressions, the following warning has been added upon successful detection of a tuner using an i2c address in the range 0x64 thru 0x6f: ====================== WARNING! ====================== Support for tuners in i2c address range 0x64 thru 0x6f will soon be dropped. This message indicates that your hardware has a {tuner name} tuner at i2c address {addr}. To ensure continued support for your device, please send a copy of this message, along with full dmesg output to v4l-dvb-maintainer@linuxtv.org Please use subject line: "obsolete tuner i2c address." ====================== WARNING! ====================== Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 14:20:42 -06:00
return;
/* We already know that the XC5000 can only be located at
* i2c address 0x61, 0x62, 0x63 or 0x64 */
if ((t->type == TUNER_XC5000) &&
((t->i2c->addr <= 0x64)) && (t->i2c->addr >= 0x61))
return;
V4L/DVB (6126): tuner: add warning for obsolete i2c address range 0x64 thru 0x6f The tuner module has a rather aggressive range of possible i2c addresses. As per the specs available, it appears as if there are no 4-byte tuners that actually use i2c addresses in the range 0x64 thru 0x6f, yet, tuner-core claims the address range 0x60 thru 0x6f. Allowing tuner.ko to probe these addresses can cause potential damage to certain IR receivers, RTC chips or any other IC's that might otherwise reside on the i2c bus using one of these addresses. The plan is to remove these i2c addresses from the i2c address range of the tuner module. If any devices are discovered that actually do have tuners at one of these addresses, the newer i2c probing methods will be used to handle those cases. In order to collect this information and avoid any potential regressions, the following warning has been added upon successful detection of a tuner using an i2c address in the range 0x64 thru 0x6f: ====================== WARNING! ====================== Support for tuners in i2c address range 0x64 thru 0x6f will soon be dropped. This message indicates that your hardware has a {tuner name} tuner at i2c address {addr}. To ensure continued support for your device, please send a copy of this message, along with full dmesg output to v4l-dvb-maintainer@linuxtv.org Please use subject line: "obsolete tuner i2c address." ====================== WARNING! ====================== Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 14:20:42 -06:00
tuner_warn("====================== WARNING! ======================\n");
tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n");
tuner_warn("will soon be dropped. This message indicates that your\n");
tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n",
t->i2c->name, t->i2c->addr);
V4L/DVB (6126): tuner: add warning for obsolete i2c address range 0x64 thru 0x6f The tuner module has a rather aggressive range of possible i2c addresses. As per the specs available, it appears as if there are no 4-byte tuners that actually use i2c addresses in the range 0x64 thru 0x6f, yet, tuner-core claims the address range 0x60 thru 0x6f. Allowing tuner.ko to probe these addresses can cause potential damage to certain IR receivers, RTC chips or any other IC's that might otherwise reside on the i2c bus using one of these addresses. The plan is to remove these i2c addresses from the i2c address range of the tuner module. If any devices are discovered that actually do have tuners at one of these addresses, the newer i2c probing methods will be used to handle those cases. In order to collect this information and avoid any potential regressions, the following warning has been added upon successful detection of a tuner using an i2c address in the range 0x64 thru 0x6f: ====================== WARNING! ====================== Support for tuners in i2c address range 0x64 thru 0x6f will soon be dropped. This message indicates that your hardware has a {tuner name} tuner at i2c address {addr}. To ensure continued support for your device, please send a copy of this message, along with full dmesg output to v4l-dvb-maintainer@linuxtv.org Please use subject line: "obsolete tuner i2c address." ====================== WARNING! ====================== Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 14:20:42 -06:00
tuner_warn("To ensure continued support for your device, please\n");
tuner_warn("send a copy of this message, along with full dmesg\n");
tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n");
tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n");
tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n",
t->i2c->adapter->name, t->i2c->addr, t->type,
V4L/DVB (6126): tuner: add warning for obsolete i2c address range 0x64 thru 0x6f The tuner module has a rather aggressive range of possible i2c addresses. As per the specs available, it appears as if there are no 4-byte tuners that actually use i2c addresses in the range 0x64 thru 0x6f, yet, tuner-core claims the address range 0x60 thru 0x6f. Allowing tuner.ko to probe these addresses can cause potential damage to certain IR receivers, RTC chips or any other IC's that might otherwise reside on the i2c bus using one of these addresses. The plan is to remove these i2c addresses from the i2c address range of the tuner module. If any devices are discovered that actually do have tuners at one of these addresses, the newer i2c probing methods will be used to handle those cases. In order to collect this information and avoid any potential regressions, the following warning has been added upon successful detection of a tuner using an i2c address in the range 0x64 thru 0x6f: ====================== WARNING! ====================== Support for tuners in i2c address range 0x64 thru 0x6f will soon be dropped. This message indicates that your hardware has a {tuner name} tuner at i2c address {addr}. To ensure continued support for your device, please send a copy of this message, along with full dmesg output to v4l-dvb-maintainer@linuxtv.org Please use subject line: "obsolete tuner i2c address." ====================== WARNING! ====================== Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 14:20:42 -06:00
tuners[t->type].name);
tuner_warn("====================== WARNING! ======================\n");
}
static void attach_simple_tuner(struct tuner *t)
{
struct simple_tuner_config cfg = {
.type = t->type,
.tun = &tuners[t->type]
};
simple_tuner_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg);
}
static void attach_tda829x(struct tuner *t)
{
struct tda829x_config cfg = {
.lna_cfg = &t->config,
.tuner_callback = t->tuner_callback,
};
tda829x_attach(&t->fe, t->i2c->adapter, t->i2c->addr, &cfg);
}
static struct xc5000_config xc5000_cfg;
static void set_type(struct i2c_client *c, unsigned int type,
unsigned int new_mode_mask, unsigned int new_config,
int (*tuner_callback) (void *dev, int command,int arg))
{
struct tuner *t = i2c_get_clientdata(c);
struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
unsigned char buffer[4];
if (type == UNSET || type == TUNER_ABSENT) {
tuner_dbg ("tuner 0x%02x: Tuner type absent\n",c->addr);
return;
}
if (type >= tuner_count) {
tuner_warn ("tuner 0x%02x: Tuner count greater than %d\n",c->addr,tuner_count);
return;
}
t->type = type;
t->config = new_config;
if (tuner_callback != NULL) {
tuner_dbg("defining GPIO callback\n");
t->tuner_callback = tuner_callback;
}
if (t->mode == T_UNINITIALIZED) {
tuner_dbg ("tuner 0x%02x: called during i2c_client register by adapter's attach_inform\n", c->addr);
return;
}
/* discard private data, in case set_type() was previously called */
if (analog_ops->release)
analog_ops->release(&t->fe);
switch (t->type) {
case TUNER_MT2032:
microtune_attach(&t->fe, t->i2c->adapter, t->i2c->addr);
break;
case TUNER_PHILIPS_TDA8290:
{
attach_tda829x(t);
break;
}
case TUNER_TEA5767:
if (tea5767_attach(&t->fe, t->i2c->adapter, t->i2c->addr) == NULL) {
t->type = TUNER_ABSENT;
t->mode_mask = T_UNINITIALIZED;
return;
}
t->mode_mask = T_RADIO;
break;
case TUNER_TEA5761:
if (tea5761_attach(&t->fe, t->i2c->adapter, t->i2c->addr) == NULL) {
t->type = TUNER_ABSENT;
t->mode_mask = T_UNINITIALIZED;
return;
}
t->mode_mask = T_RADIO;
break;
case TUNER_PHILIPS_FMD1216ME_MK3:
buffer[0] = 0x0b;
buffer[1] = 0xdc;
buffer[2] = 0x9c;
buffer[3] = 0x60;
i2c_master_send(c, buffer, 4);
mdelay(1);
buffer[2] = 0x86;
buffer[3] = 0x54;
i2c_master_send(c, buffer, 4);
attach_simple_tuner(t);
break;
case TUNER_PHILIPS_TD1316:
buffer[0] = 0x0b;
buffer[1] = 0xdc;
buffer[2] = 0x86;
buffer[3] = 0xa4;
i2c_master_send(c,buffer,4);
attach_simple_tuner(t);
break;
case TUNER_XC2028:
{
struct xc2028_config cfg = {
.i2c_adap = t->i2c->adapter,
.i2c_addr = t->i2c->addr,
.video_dev = c->adapter->algo_data,
.callback = t->tuner_callback,
};
if (!xc2028_attach(&t->fe, &cfg)) {
t->type = TUNER_ABSENT;
t->mode_mask = T_UNINITIALIZED;
return;
}
break;
}
case TUNER_TDA9887:
tda9887_attach(&t->fe, t->i2c->adapter, t->i2c->addr);
break;
case TUNER_XC5000:
xc5000_cfg.i2c_address = t->i2c->addr;
xc5000_cfg.if_khz = 5380;
xc5000_cfg.priv = c->adapter->algo_data;
xc5000_cfg.tuner_callback = t->tuner_callback;
if (!xc5000_attach(&t->fe, t->i2c->adapter, &xc5000_cfg)) {
t->type = TUNER_ABSENT;
t->mode_mask = T_UNINITIALIZED;
return;
}
{
struct dvb_tuner_ops *xc_tuner_ops;
xc_tuner_ops = &t->fe.ops.tuner_ops;
if(xc_tuner_ops->init != NULL)
xc_tuner_ops->init(&t->fe);
}
break;
default:
attach_simple_tuner(t);
break;
}
if ((NULL == analog_ops->set_params) &&
(fe_tuner_ops->set_analog_params)) {
strlcpy(t->i2c->name, fe_tuner_ops->info.name,
sizeof(t->i2c->name));
t->fe.analog_demod_priv = t;
memcpy(analog_ops, &tuner_core_ops,
sizeof(struct analog_demod_ops));
} else {
strlcpy(t->i2c->name, analog_ops->info.name,
sizeof(t->i2c->name));
}
tuner_dbg("type set to %s\n", t->i2c->name);
if (t->mode_mask == T_UNINITIALIZED)
t->mode_mask = new_mode_mask;
set_freq(c, (V4L2_TUNER_RADIO == t->mode) ? t->radio_freq : t->tv_freq);
tuner_dbg("%s %s I2C addr 0x%02x with type %d used for 0x%02x\n",
c->adapter->name, c->driver->driver.name, c->addr << 1, type,
t->mode_mask);
V4L/DVB (6126): tuner: add warning for obsolete i2c address range 0x64 thru 0x6f The tuner module has a rather aggressive range of possible i2c addresses. As per the specs available, it appears as if there are no 4-byte tuners that actually use i2c addresses in the range 0x64 thru 0x6f, yet, tuner-core claims the address range 0x60 thru 0x6f. Allowing tuner.ko to probe these addresses can cause potential damage to certain IR receivers, RTC chips or any other IC's that might otherwise reside on the i2c bus using one of these addresses. The plan is to remove these i2c addresses from the i2c address range of the tuner module. If any devices are discovered that actually do have tuners at one of these addresses, the newer i2c probing methods will be used to handle those cases. In order to collect this information and avoid any potential regressions, the following warning has been added upon successful detection of a tuner using an i2c address in the range 0x64 thru 0x6f: ====================== WARNING! ====================== Support for tuners in i2c address range 0x64 thru 0x6f will soon be dropped. This message indicates that your hardware has a {tuner name} tuner at i2c address {addr}. To ensure continued support for your device, please send a copy of this message, along with full dmesg output to v4l-dvb-maintainer@linuxtv.org Please use subject line: "obsolete tuner i2c address." ====================== WARNING! ====================== Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-08-28 14:20:42 -06:00
tuner_i2c_address_check(t);
}
/*
* This function apply tuner config to tuner specified
* by tun_setup structure. I addr is unset, then admin status
* and tun addr status is more precise then current status,
* it's applied. Otherwise status and type are applied only to
* tuner with exactly the same addr.
*/
static void set_addr(struct i2c_client *c, struct tuner_setup *tun_setup)
{
struct tuner *t = i2c_get_clientdata(c);
tuner_dbg("set addr for type %i\n", t->type);
if ( (t->type == UNSET && ((tun_setup->addr == ADDR_UNSET) &&
(t->mode_mask & tun_setup->mode_mask))) ||
(tun_setup->addr == c->addr)) {
set_type(c, tun_setup->type, tun_setup->mode_mask,
tun_setup->config, tun_setup->tuner_callback);
}
}
static inline int check_mode(struct tuner *t, char *cmd)
{
if ((1 << t->mode & t->mode_mask) == 0) {
return EINVAL;
}
switch (t->mode) {
case V4L2_TUNER_RADIO:
tuner_dbg("Cmd %s accepted for radio\n", cmd);
break;
case V4L2_TUNER_ANALOG_TV:
tuner_dbg("Cmd %s accepted for analog TV\n", cmd);
break;
case V4L2_TUNER_DIGITAL_TV:
tuner_dbg("Cmd %s accepted for digital TV\n", cmd);
break;
}
return 0;
}
/* get more precise norm info from insmod option */
static int tuner_fixup_std(struct tuner *t)
{
if ((t->std & V4L2_STD_PAL) == V4L2_STD_PAL) {
switch (pal[0]) {
case '6':
tuner_dbg ("insmod fixup: PAL => PAL-60\n");
t->std = V4L2_STD_PAL_60;
break;
case 'b':
case 'B':
case 'g':
case 'G':
tuner_dbg ("insmod fixup: PAL => PAL-BG\n");
t->std = V4L2_STD_PAL_BG;
break;
case 'i':
case 'I':
tuner_dbg ("insmod fixup: PAL => PAL-I\n");
t->std = V4L2_STD_PAL_I;
break;
case 'd':
case 'D':
case 'k':
case 'K':
tuner_dbg ("insmod fixup: PAL => PAL-DK\n");
t->std = V4L2_STD_PAL_DK;
break;
case 'M':
case 'm':
tuner_dbg ("insmod fixup: PAL => PAL-M\n");
t->std = V4L2_STD_PAL_M;
break;
case 'N':
case 'n':
if (pal[1] == 'c' || pal[1] == 'C') {
tuner_dbg("insmod fixup: PAL => PAL-Nc\n");
t->std = V4L2_STD_PAL_Nc;
} else {
tuner_dbg ("insmod fixup: PAL => PAL-N\n");
t->std = V4L2_STD_PAL_N;
}
break;
case '-':
/* default parameter, do nothing */
break;
default:
tuner_warn ("pal= argument not recognised\n");
break;
}
}
if ((t->std & V4L2_STD_SECAM) == V4L2_STD_SECAM) {
switch (secam[0]) {
case 'b':
case 'B':
case 'g':
case 'G':
case 'h':
case 'H':
tuner_dbg("insmod fixup: SECAM => SECAM-BGH\n");
t->std = V4L2_STD_SECAM_B | V4L2_STD_SECAM_G | V4L2_STD_SECAM_H;
break;
case 'd':
case 'D':
case 'k':
case 'K':
tuner_dbg ("insmod fixup: SECAM => SECAM-DK\n");
t->std = V4L2_STD_SECAM_DK;
break;
case 'l':
case 'L':
if ((secam[1]=='C')||(secam[1]=='c')) {
tuner_dbg ("insmod fixup: SECAM => SECAM-L'\n");
t->std = V4L2_STD_SECAM_LC;
} else {
tuner_dbg ("insmod fixup: SECAM => SECAM-L\n");
t->std = V4L2_STD_SECAM_L;
}
break;
case '-':
/* default parameter, do nothing */
break;
default:
tuner_warn ("secam= argument not recognised\n");
break;
}
}
if ((t->std & V4L2_STD_NTSC) == V4L2_STD_NTSC) {
switch (ntsc[0]) {
case 'm':
case 'M':
tuner_dbg("insmod fixup: NTSC => NTSC-M\n");
t->std = V4L2_STD_NTSC_M;
break;
case 'j':
case 'J':
tuner_dbg("insmod fixup: NTSC => NTSC_M_JP\n");
t->std = V4L2_STD_NTSC_M_JP;
break;
case 'k':
case 'K':
tuner_dbg("insmod fixup: NTSC => NTSC_M_KR\n");
t->std = V4L2_STD_NTSC_M_KR;
break;
case '-':
/* default parameter, do nothing */
break;
default:
tuner_info("ntsc= argument not recognised\n");
break;
}
}
return 0;
}
static void tuner_status(struct dvb_frontend *fe)
{
struct tuner *t = fe->analog_demod_priv;
unsigned long freq, freq_fraction;
struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
const char *p;
switch (t->mode) {
case V4L2_TUNER_RADIO: p = "radio"; break;
case V4L2_TUNER_ANALOG_TV: p = "analog TV"; break;
case V4L2_TUNER_DIGITAL_TV: p = "digital TV"; break;
default: p = "undefined"; break;
}
if (t->mode == V4L2_TUNER_RADIO) {
freq = t->radio_freq / 16000;
freq_fraction = (t->radio_freq % 16000) * 100 / 16000;
} else {
freq = t->tv_freq / 16;
freq_fraction = (t->tv_freq % 16) * 100 / 16;
}
tuner_info("Tuner mode: %s\n", p);
tuner_info("Frequency: %lu.%02lu MHz\n", freq, freq_fraction);
tuner_info("Standard: 0x%08lx\n", (unsigned long)t->std);
if (t->mode != V4L2_TUNER_RADIO)
return;
if (fe_tuner_ops->get_status) {
u32 tuner_status;
fe_tuner_ops->get_status(&t->fe, &tuner_status);
if (tuner_status & TUNER_STATUS_LOCKED)
tuner_info("Tuner is locked.\n");
if (tuner_status & TUNER_STATUS_STEREO)
tuner_info("Stereo: yes\n");
}
if (analog_ops->has_signal)
tuner_info("Signal strength: %d\n",
analog_ops->has_signal(fe));
if (analog_ops->is_stereo)
tuner_info("Stereo: %s\n",
analog_ops->is_stereo(fe) ? "yes" : "no");
}
/* ---------------------------------------------------------------------- */
/*
* Switch tuner to other mode. If tuner support both tv and radio,
* set another frequency to some value (This is needed for some pal
* tuners to avoid locking). Otherwise, just put second tuner in
* standby mode.
*/
static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, char *cmd)
{
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
if (mode == t->mode)
return 0;
t->mode = mode;
if (check_mode(t, cmd) == EINVAL) {
t->mode = T_STANDBY;
if (analog_ops->standby)
analog_ops->standby(&t->fe);
return EINVAL;
}
return 0;
}
#define switch_v4l2() if (!t->using_v4l2) \
tuner_dbg("switching to v4l2\n"); \
t->using_v4l2 = 1;
static inline int check_v4l2(struct tuner *t)
{
/* bttv still uses both v4l1 and v4l2 calls to the tuner (v4l2 for
TV, v4l1 for radio), until that is fixed this code is disabled.
Otherwise the radio (v4l1) wouldn't tune after using the TV (v4l2)
first. */
return 0;
}
static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg)
{
struct tuner *t = i2c_get_clientdata(client);
struct dvb_tuner_ops *fe_tuner_ops = &t->fe.ops.tuner_ops;
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
if (tuner_debug>1)
v4l_i2c_print_ioctl(client,cmd);
switch (cmd) {
/* --- configuration --- */
case TUNER_SET_TYPE_ADDR:
tuner_dbg ("Calling set_type_addr for type=%d, addr=0x%02x, mode=0x%02x, config=0x%02x\n",
((struct tuner_setup *)arg)->type,
((struct tuner_setup *)arg)->addr,
((struct tuner_setup *)arg)->mode_mask,
((struct tuner_setup *)arg)->config);
set_addr(client, (struct tuner_setup *)arg);
break;
case AUDC_SET_RADIO:
if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO")
== EINVAL)
return 0;
if (t->radio_freq)
set_freq(client, t->radio_freq);
break;
case TUNER_SET_STANDBY:
if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL)
return 0;
t->mode = T_STANDBY;
if (analog_ops->standby)
analog_ops->standby(&t->fe);
break;
#ifdef CONFIG_VIDEO_V4L1
[PATCH] V4L: Miscellaneous fixes - Fixed some bttv card numbers. - BTTV and SAA7134 version numbers incremented to reflect changes. - pci_dma_supported() is called after pci_set_dma_mask() which already did check that for us. This patch removes the unneeded call to pci_dma_supported() at bttv-driver.c - Ensure a sufficient I2C bus idle time between 2 messages for saa7134-i2c.c - It is important to write at first to MO_GP3_IO for cx88-tvaudio.c - Use try_to_freeze() instead of refrigerator at msp3400.c - Recognizing the MFPE05-2 Tuner at tveeprom.c - Add new parameter to help identify radio chipsets at tuner module: show_i2c=1 will show 16 reading bytes from detected tuners. - BTTV does generate some Unimplemented IOCTL log at tuner module: 0x40046d11(dir=1,tp=0x6d,nr=17,sz=4) means that it is sending MSP3400 calls to non-msp3400 tuners. Warning eliminated. VIDIOSAUDIO is also called, so debug messages updated. It is still requiring IOCTL implementation. - Added two more tuners. - Add support for the SVideo input on the GDI Black Gold. Signed-off-by: Peter Missel <peter.missel@onlinehome.de> Signed-off-by: Graham Bevan <graham.bevan@ntlworld.com> Signed-off-by: Torsten Seeboth <Torsten.Seeboth@t-online.de> Signed-off-by: Hartmut Hackmann <hartmut.hackmann@t.online.de> Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch> Signed-off-by: Michael Krufky <mkrufky@m1k.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@brturbo.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-31 23:34:43 -06:00
case VIDIOCSAUDIO:
if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
return 0;
if (check_v4l2(t) == EINVAL)
return 0;
/* Should be implemented, since bttv calls it */
tuner_dbg("VIDIOCSAUDIO not implemented.\n");
break;
case VIDIOCSCHAN:
{
static const v4l2_std_id map[] = {
[VIDEO_MODE_PAL] = V4L2_STD_PAL,
[VIDEO_MODE_NTSC] = V4L2_STD_NTSC_M,
[VIDEO_MODE_SECAM] = V4L2_STD_SECAM,
[4 /* bttv */ ] = V4L2_STD_PAL_M,
[5 /* bttv */ ] = V4L2_STD_PAL_N,
[6 /* bttv */ ] = V4L2_STD_NTSC_M_JP,
};
struct video_channel *vc = arg;
if (check_v4l2(t) == EINVAL)
return 0;
if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL)
return 0;
if (vc->norm < ARRAY_SIZE(map))
t->std = map[vc->norm];
tuner_fixup_std(t);
if (t->tv_freq)
set_tv_freq(client, t->tv_freq);
return 0;
}
case VIDIOCSFREQ:
{
unsigned long *v = arg;
if (check_mode(t, "VIDIOCSFREQ") == EINVAL)
return 0;
if (check_v4l2(t) == EINVAL)
return 0;
set_freq(client, *v);
return 0;
}
case VIDIOCGTUNER:
{
struct video_tuner *vt = arg;
if (check_mode(t, "VIDIOCGTUNER") == EINVAL)
return 0;
if (check_v4l2(t) == EINVAL)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
if (fe_tuner_ops->get_status) {
u32 tuner_status;
fe_tuner_ops->get_status(&t->fe, &tuner_status);
if (tuner_status & TUNER_STATUS_STEREO)
vt->flags |= VIDEO_TUNER_STEREO_ON;
else
vt->flags &= ~VIDEO_TUNER_STEREO_ON;
} else {
if (analog_ops->is_stereo) {
if (analog_ops->is_stereo(&t->fe))
vt->flags |=
VIDEO_TUNER_STEREO_ON;
else
vt->flags &=
~VIDEO_TUNER_STEREO_ON;
}
}
if (analog_ops->has_signal)
vt->signal =
analog_ops->has_signal(&t->fe);
vt->flags |= VIDEO_TUNER_LOW; /* Allow freqs at 62.5 Hz */
vt->rangelow = radio_range[0] * 16000;
vt->rangehigh = radio_range[1] * 16000;
} else {
vt->rangelow = tv_range[0] * 16;
vt->rangehigh = tv_range[1] * 16;
}
return 0;
}
case VIDIOCGAUDIO:
{
struct video_audio *va = arg;
if (check_mode(t, "VIDIOCGAUDIO") == EINVAL)
return 0;
if (check_v4l2(t) == EINVAL)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
if (fe_tuner_ops->get_status) {
u32 tuner_status;
fe_tuner_ops->get_status(&t->fe, &tuner_status);
va->mode = (tuner_status & TUNER_STATUS_STEREO)
? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
} else if (analog_ops->is_stereo)
va->mode = analog_ops->is_stereo(&t->fe)
? VIDEO_SOUND_STEREO : VIDEO_SOUND_MONO;
}
return 0;
}
#endif
case TUNER_SET_CONFIG:
{
struct v4l2_priv_tun_config *cfg = arg;
if (t->type != cfg->tuner)
break;
if (analog_ops->set_config) {
analog_ops->set_config(&t->fe, cfg->priv);
break;
}
tuner_dbg("Tuner frontend module has no way to set config\n");
break;
}
/* --- v4l ioctls --- */
/* take care: bttv does userspace copying, we'll get a
kernel pointer here... */
case VIDIOC_S_STD:
{
v4l2_std_id *id = arg;
if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD")
== EINVAL)
return 0;
switch_v4l2();
t->std = *id;
tuner_fixup_std(t);
if (t->tv_freq)
set_freq(client, t->tv_freq);
break;
}
case VIDIOC_S_FREQUENCY:
{
struct v4l2_frequency *f = arg;
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
== EINVAL)
return 0;
switch_v4l2();
set_freq(client,f->frequency);
break;
}
case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *f = arg;
if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL)
return 0;
switch_v4l2();
f->type = t->mode;
if (fe_tuner_ops->get_frequency) {
u32 abs_freq;
fe_tuner_ops->get_frequency(&t->fe, &abs_freq);
f->frequency = (V4L2_TUNER_RADIO == t->mode) ?
(abs_freq * 2 + 125/2) / 125 :
(abs_freq + 62500/2) / 62500;
break;
}
f->frequency = (V4L2_TUNER_RADIO == t->mode) ?
t->radio_freq : t->tv_freq;
break;
}
case VIDIOC_G_TUNER:
{
struct v4l2_tuner *tuner = arg;
if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL)
return 0;
switch_v4l2();
tuner->type = t->mode;
if (analog_ops->get_afc)
tuner->afc = analog_ops->get_afc(&t->fe);
if (t->mode == V4L2_TUNER_ANALOG_TV)
tuner->capability |= V4L2_TUNER_CAP_NORM;
if (t->mode != V4L2_TUNER_RADIO) {
tuner->rangelow = tv_range[0] * 16;
tuner->rangehigh = tv_range[1] * 16;
break;
}
/* radio mode */
tuner->rxsubchans =
V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
if (fe_tuner_ops->get_status) {
u32 tuner_status;
fe_tuner_ops->get_status(&t->fe, &tuner_status);
tuner->rxsubchans =
(tuner_status & TUNER_STATUS_STEREO) ?
V4L2_TUNER_SUB_STEREO :
V4L2_TUNER_SUB_MONO;
} else {
if (analog_ops->is_stereo) {
tuner->rxsubchans =
analog_ops->is_stereo(&t->fe) ?
V4L2_TUNER_SUB_STEREO :
V4L2_TUNER_SUB_MONO;
}
}
if (analog_ops->has_signal)
tuner->signal = analog_ops->has_signal(&t->fe);
tuner->capability |=
V4L2_TUNER_CAP_LOW | V4L2_TUNER_CAP_STEREO;
tuner->audmode = t->audmode;
tuner->rangelow = radio_range[0] * 16000;
tuner->rangehigh = radio_range[1] * 16000;
break;
}
case VIDIOC_S_TUNER:
{
struct v4l2_tuner *tuner = arg;
if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL)
return 0;
switch_v4l2();
/* do nothing unless we're a radio tuner */
if (t->mode != V4L2_TUNER_RADIO)
break;
t->audmode = tuner->audmode;
set_radio_freq(client, t->radio_freq);
break;
}
case VIDIOC_LOG_STATUS:
if (analog_ops->tuner_status)
analog_ops->tuner_status(&t->fe);
break;
}
return 0;
}
static int tuner_suspend(struct i2c_client *c, pm_message_t state)
{
struct tuner *t = i2c_get_clientdata(c);
tuner_dbg("suspend\n");
/* FIXME: power down ??? */
return 0;
}
static int tuner_resume(struct i2c_client *c)
{
struct tuner *t = i2c_get_clientdata(c);
tuner_dbg("resume\n");
if (V4L2_TUNER_RADIO == t->mode) {
if (t->radio_freq)
set_freq(c, t->radio_freq);
} else {
if (t->tv_freq)
set_freq(c, t->tv_freq);
}
return 0;
}
/* ---------------------------------------------------------------------- */
LIST_HEAD(tuner_list);
/* Search for existing radio and/or TV tuners on the given I2C adapter.
Note that when this function is called from tuner_probe you can be
certain no other devices will be added/deleted at the same time, I2C
core protects against that. */
static void tuner_lookup(struct i2c_adapter *adap,
struct tuner **radio, struct tuner **tv)
{
struct tuner *pos;
*radio = NULL;
*tv = NULL;
list_for_each_entry(pos, &tuner_list, list) {
int mode_mask;
if (pos->i2c->adapter != adap ||
pos->i2c->driver->id != I2C_DRIVERID_TUNER)
continue;
mode_mask = pos->mode_mask & ~T_STANDBY;
if (*radio == NULL && mode_mask == T_RADIO)
*radio = pos;
/* Note: currently TDA9887 is the only demod-only
device. If other devices appear then we need to
make this test more general. */
else if (*tv == NULL && pos->type != TUNER_TDA9887 &&
(pos->mode_mask & (T_ANALOG_TV | T_DIGITAL_TV)))
*tv = pos;
}
}
/* During client attach, set_type is called by adapter's attach_inform callback.
set_type must then be completed by tuner_probe.
*/
static int tuner_probe(struct i2c_client *client)
{
struct tuner *t;
struct tuner *radio;
struct tuner *tv;
t = kzalloc(sizeof(struct tuner), GFP_KERNEL);
if (NULL == t)
return -ENOMEM;
t->i2c = client;
strlcpy(client->name, "(tuner unset)", sizeof(client->name));
i2c_set_clientdata(client, t);
t->type = UNSET;
t->audmode = V4L2_TUNER_MODE_STEREO;
t->mode_mask = T_UNINITIALIZED;
if (show_i2c) {
unsigned char buffer[16];
int i, rc;
memset(buffer, 0, sizeof(buffer));
rc = i2c_master_recv(client, buffer, sizeof(buffer));
tuner_info("I2C RECV = ");
for (i = 0; i < rc; i++)
printk(KERN_CONT "%02x ", buffer[i]);
printk("\n");
}
/* HACK: This test was added to avoid tuner to probe tda9840 and
tea6415c on the MXB card */
if (client->adapter->id == I2C_HW_SAA7146 && client->addr < 0x4a) {
kfree(t);
return -ENODEV;
}
/* autodetection code based on the i2c addr */
if (!no_autodetect) {
switch (client->addr) {
case 0x10:
if (tea5761_autodetection(t->i2c->adapter, t->i2c->addr)
!= EINVAL) {
t->type = TUNER_TEA5761;
t->mode_mask = T_RADIO;
t->mode = T_STANDBY;
/* Sets freq to FM range */
t->radio_freq = 87.5 * 16000;
tuner_lookup(t->i2c->adapter, &radio, &tv);
if (tv)
tv->mode_mask &= ~T_RADIO;
goto register_client;
}
break;
case 0x42:
case 0x43:
case 0x4a:
case 0x4b:
/* If chip is not tda8290, don't register.
since it can be tda9887*/
if (tda829x_probe(t->i2c->adapter,
t->i2c->addr) == 0) {
tuner_dbg("tda829x detected\n");
} else {
/* Default is being tda9887 */
t->type = TUNER_TDA9887;
t->mode_mask = T_RADIO | T_ANALOG_TV |
T_DIGITAL_TV;
t->mode = T_STANDBY;
goto register_client;
}
break;
case 0x60:
if (tea5767_autodetection(t->i2c->adapter, t->i2c->addr)
!= EINVAL) {
t->type = TUNER_TEA5767;
t->mode_mask = T_RADIO;
t->mode = T_STANDBY;
/* Sets freq to FM range */
t->radio_freq = 87.5 * 16000;
tuner_lookup(t->i2c->adapter, &radio, &tv);
if (tv)
tv->mode_mask &= ~T_RADIO;
goto register_client;
}
break;
}
}
/* Initializes only the first TV tuner on this adapter. Why only the
first? Because there are some devices (notably the ones with TI
tuners) that have more than one i2c address for the *same* device.
Experience shows that, except for just one case, the first
address is the right one. The exception is a Russian tuner
(ACORP_Y878F). So, the desired behavior is just to enable the
first found TV tuner. */
tuner_lookup(t->i2c->adapter, &radio, &tv);
if (tv == NULL) {
t->mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
if (radio == NULL)
t->mode_mask |= T_RADIO;
tuner_dbg("Setting mode_mask to 0x%02x\n", t->mode_mask);
t->tv_freq = 400 * 16; /* Sets freq to VHF High */
t->radio_freq = 87.5 * 16000; /* Sets freq to FM range */
}
/* Should be just before return */
register_client:
tuner_info("chip found @ 0x%x (%s)\n", client->addr << 1,
client->adapter->name);
/* Sets a default mode */
if (t->mode_mask & T_ANALOG_TV) {
t->mode = V4L2_TUNER_ANALOG_TV;
} else if (t->mode_mask & T_RADIO) {
t->mode = V4L2_TUNER_RADIO;
} else {
t->mode = V4L2_TUNER_DIGITAL_TV;
}
set_type(client, t->type, t->mode_mask, t->config, t->tuner_callback);
list_add_tail(&t->list, &tuner_list);
return 0;
}
static int tuner_legacy_probe(struct i2c_adapter *adap)
{
if (0 != addr) {
normal_i2c[0] = addr;
normal_i2c[1] = I2C_CLIENT_END;
}
if ((adap->class & I2C_CLASS_TV_ANALOG) == 0)
return 0;
/* HACK: Ignore 0x6b and 0x6f on cx88 boards.
* FusionHDTV5 RT Gold has an ir receiver at 0x6b
* and an RTC at 0x6f which can get corrupted if probed.
*/
if ((adap->id == I2C_HW_B_CX2388x) ||
(adap->id == I2C_HW_B_CX23885)) {
unsigned int i = 0;
while (i < I2C_CLIENT_MAX_OPTS && ignore[i] != I2C_CLIENT_END)
i += 2;
if (i + 4 < I2C_CLIENT_MAX_OPTS) {
ignore[i+0] = adap->nr;
ignore[i+1] = 0x6b;
ignore[i+2] = adap->nr;
ignore[i+3] = 0x6f;
ignore[i+4] = I2C_CLIENT_END;
} else
printk(KERN_WARNING "tuner: "
"too many options specified "
"in i2c probe ignore list!\n");
}
return 1;
}
static int tuner_remove(struct i2c_client *client)
{
struct tuner *t = i2c_get_clientdata(client);
struct analog_demod_ops *analog_ops = &t->fe.ops.analog_ops;
if (analog_ops->release)
analog_ops->release(&t->fe);
list_del(&t->list);
kfree(t);
return 0;
}
/* ----------------------------------------------------------------------- */
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "tuner",
.driverid = I2C_DRIVERID_TUNER,
.command = tuner_command,
.probe = tuner_probe,
.remove = tuner_remove,
.suspend = tuner_suspend,
.resume = tuner_resume,
.legacy_probe = tuner_legacy_probe,
};
/*
* Overrides for Emacs so that we follow Linus's tabbing style.
* ---------------------------------------------------------------------------
* Local variables:
* c-basic-offset: 8
* End:
*/