2005-04-16 16:20:36 -06:00
|
|
|
/*
|
|
|
|
|
* include/asm-ppc/ppc4xx_dma.h
|
|
|
|
|
*
|
|
|
|
|
* IBM PPC4xx DMA engine library
|
|
|
|
|
*
|
|
|
|
|
* Copyright 2000-2004 MontaVista Software Inc.
|
|
|
|
|
*
|
|
|
|
|
* Cleaned up a bit more, Matt Porter <mporter@kernel.crashing.org>
|
|
|
|
|
*
|
|
|
|
|
* Original code by Armin Kuster <akuster@mvista.com>
|
|
|
|
|
* and Pete Popov <ppopov@mvista.com>
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
|
* option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU General Public License along
|
|
|
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
|
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifdef __KERNEL__
|
|
|
|
|
#ifndef __ASMPPC_PPC4xx_DMA_H
|
|
|
|
|
#define __ASMPPC_PPC4xx_DMA_H
|
|
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
#include <asm/mmu.h>
|
|
|
|
|
#include <asm/ibm4xx.h>
|
|
|
|
|
|
|
|
|
|
#undef DEBUG_4xxDMA
|
|
|
|
|
|
|
|
|
|
#define MAX_PPC4xx_DMA_CHANNELS 4
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Function return status codes
|
|
|
|
|
* These values are used to indicate whether or not the function
|
|
|
|
|
* call was successful, or a bad/invalid parameter was passed.
|
|
|
|
|
*/
|
|
|
|
|
#define DMA_STATUS_GOOD 0
|
|
|
|
|
#define DMA_STATUS_BAD_CHANNEL 1
|
|
|
|
|
#define DMA_STATUS_BAD_HANDLE 2
|
|
|
|
|
#define DMA_STATUS_BAD_MODE 3
|
|
|
|
|
#define DMA_STATUS_NULL_POINTER 4
|
|
|
|
|
#define DMA_STATUS_OUT_OF_MEMORY 5
|
|
|
|
|
#define DMA_STATUS_SGL_LIST_EMPTY 6
|
|
|
|
|
#define DMA_STATUS_GENERAL_ERROR 7
|
|
|
|
|
#define DMA_STATUS_CHANNEL_NOTFREE 8
|
|
|
|
|
|
|
|
|
|
#define DMA_CHANNEL_BUSY 0x80000000
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* These indicate status as returned from the DMA Status Register.
|
|
|
|
|
*/
|
|
|
|
|
#define DMA_STATUS_NO_ERROR 0
|
|
|
|
|
#define DMA_STATUS_CS 1 /* Count Status */
|
|
|
|
|
#define DMA_STATUS_TS 2 /* Transfer Status */
|
|
|
|
|
#define DMA_STATUS_DMA_ERROR 3 /* DMA Error Occurred */
|
|
|
|
|
#define DMA_STATUS_DMA_BUSY 4 /* The channel is busy */
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* DMA Channel Control Registers
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_44x
|
|
|
|
|
#define PPC4xx_DMA_64BIT
|
|
|
|
|
#define DMA_CR_OFFSET 1
|
|
|
|
|
#else
|
|
|
|
|
#define DMA_CR_OFFSET 0
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define DMA_CE_ENABLE (1<<31) /* DMA Channel Enable */
|
|
|
|
|
#define SET_DMA_CE_ENABLE(x) (((x)&0x1)<<31)
|
|
|
|
|
#define GET_DMA_CE_ENABLE(x) (((x)&DMA_CE_ENABLE)>>31)
|
|
|
|
|
|
|
|
|
|
#define DMA_CIE_ENABLE (1<<30) /* DMA Channel Interrupt Enable */
|
|
|
|
|
#define SET_DMA_CIE_ENABLE(x) (((x)&0x1)<<30)
|
|
|
|
|
#define GET_DMA_CIE_ENABLE(x) (((x)&DMA_CIE_ENABLE)>>30)
|
|
|
|
|
|
|
|
|
|
#define DMA_TD (1<<29)
|
|
|
|
|
#define SET_DMA_TD(x) (((x)&0x1)<<29)
|
|
|
|
|
#define GET_DMA_TD(x) (((x)&DMA_TD)>>29)
|
|
|
|
|
|
|
|
|
|
#define DMA_PL (1<<28) /* Peripheral Location */
|
|
|
|
|
#define SET_DMA_PL(x) (((x)&0x1)<<28)
|
|
|
|
|
#define GET_DMA_PL(x) (((x)&DMA_PL)>>28)
|
|
|
|
|
|
|
|
|
|
#define EXTERNAL_PERIPHERAL 0
|
|
|
|
|
#define INTERNAL_PERIPHERAL 1
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_PW(x) (((x)&0x3)<<(26-DMA_CR_OFFSET)) /* Peripheral Width */
|
|
|
|
|
#define DMA_PW_MASK SET_DMA_PW(3)
|
|
|
|
|
#define PW_8 0
|
|
|
|
|
#define PW_16 1
|
|
|
|
|
#define PW_32 2
|
|
|
|
|
#define PW_64 3
|
|
|
|
|
/* FIXME: Add PW_128 support for 440GP DMA block */
|
|
|
|
|
#define GET_DMA_PW(x) (((x)&DMA_PW_MASK)>>(26-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define DMA_DAI (1<<(25-DMA_CR_OFFSET)) /* Destination Address Increment */
|
|
|
|
|
#define SET_DMA_DAI(x) (((x)&0x1)<<(25-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define DMA_SAI (1<<(24-DMA_CR_OFFSET)) /* Source Address Increment */
|
|
|
|
|
#define SET_DMA_SAI(x) (((x)&0x1)<<(24-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define DMA_BEN (1<<(23-DMA_CR_OFFSET)) /* Buffer Enable */
|
|
|
|
|
#define SET_DMA_BEN(x) (((x)&0x1)<<(23-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_TM(x) (((x)&0x3)<<(21-DMA_CR_OFFSET)) /* Transfer Mode */
|
|
|
|
|
#define DMA_TM_MASK SET_DMA_TM(3)
|
|
|
|
|
#define TM_PERIPHERAL 0 /* Peripheral */
|
|
|
|
|
#define TM_RESERVED 1 /* Reserved */
|
|
|
|
|
#define TM_S_MM 2 /* Memory to Memory */
|
|
|
|
|
#define TM_D_MM 3 /* Device Paced Memory to Memory */
|
|
|
|
|
#define GET_DMA_TM(x) (((x)&DMA_TM_MASK)>>(21-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_PSC(x) (((x)&0x3)<<(19-DMA_CR_OFFSET)) /* Peripheral Setup Cycles */
|
|
|
|
|
#define DMA_PSC_MASK SET_DMA_PSC(3)
|
|
|
|
|
#define GET_DMA_PSC(x) (((x)&DMA_PSC_MASK)>>(19-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_PWC(x) (((x)&0x3F)<<(13-DMA_CR_OFFSET)) /* Peripheral Wait Cycles */
|
|
|
|
|
#define DMA_PWC_MASK SET_DMA_PWC(0x3F)
|
|
|
|
|
#define GET_DMA_PWC(x) (((x)&DMA_PWC_MASK)>>(13-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_PHC(x) (((x)&0x7)<<(10-DMA_CR_OFFSET)) /* Peripheral Hold Cycles */
|
|
|
|
|
#define DMA_PHC_MASK SET_DMA_PHC(0x7)
|
|
|
|
|
#define GET_DMA_PHC(x) (((x)&DMA_PHC_MASK)>>(10-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define DMA_ETD_OUTPUT (1<<(9-DMA_CR_OFFSET)) /* EOT pin is a TC output */
|
|
|
|
|
#define SET_DMA_ETD(x) (((x)&0x1)<<(9-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define DMA_TCE_ENABLE (1<<(8-DMA_CR_OFFSET))
|
|
|
|
|
#define SET_DMA_TCE(x) (((x)&0x1)<<(8-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define DMA_DEC (1<<(2)) /* Address Decrement */
|
|
|
|
|
#define SET_DMA_DEC(x) (((x)&0x1)<<2)
|
|
|
|
|
#define GET_DMA_DEC(x) (((x)&DMA_DEC)>>2)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Transfer Modes
|
|
|
|
|
* These modes are defined in a way that makes it possible to
|
|
|
|
|
* simply "or" in the value in the control register.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define DMA_MODE_MM (SET_DMA_TM(TM_S_MM)) /* memory to memory */
|
|
|
|
|
|
|
|
|
|
/* Device-paced memory to memory, */
|
|
|
|
|
/* device is at source address */
|
|
|
|
|
#define DMA_MODE_MM_DEVATSRC (DMA_TD | SET_DMA_TM(TM_D_MM))
|
|
|
|
|
|
|
|
|
|
/* Device-paced memory to memory, */
|
|
|
|
|
/* device is at destination address */
|
|
|
|
|
#define DMA_MODE_MM_DEVATDST (SET_DMA_TM(TM_D_MM))
|
|
|
|
|
|
|
|
|
|
/* 405gp/440gp */
|
|
|
|
|
#define SET_DMA_PREFETCH(x) (((x)&0x3)<<(4-DMA_CR_OFFSET)) /* Memory Read Prefetch */
|
|
|
|
|
#define DMA_PREFETCH_MASK SET_DMA_PREFETCH(3)
|
|
|
|
|
#define PREFETCH_1 0 /* Prefetch 1 Double Word */
|
|
|
|
|
#define PREFETCH_2 1
|
|
|
|
|
#define PREFETCH_4 2
|
|
|
|
|
#define GET_DMA_PREFETCH(x) (((x)&DMA_PREFETCH_MASK)>>(4-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
#define DMA_PCE (1<<(3-DMA_CR_OFFSET)) /* Parity Check Enable */
|
|
|
|
|
#define SET_DMA_PCE(x) (((x)&0x1)<<(3-DMA_CR_OFFSET))
|
|
|
|
|
#define GET_DMA_PCE(x) (((x)&DMA_PCE)>>(3-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
/* stb3x */
|
|
|
|
|
|
|
|
|
|
#define DMA_ECE_ENABLE (1<<5)
|
|
|
|
|
#define SET_DMA_ECE(x) (((x)&0x1)<<5)
|
|
|
|
|
#define GET_DMA_ECE(x) (((x)&DMA_ECE_ENABLE)>>5)
|
|
|
|
|
|
|
|
|
|
#define DMA_TCD_DISABLE (1<<4)
|
|
|
|
|
#define SET_DMA_TCD(x) (((x)&0x1)<<4)
|
|
|
|
|
#define GET_DMA_TCD(x) (((x)&DMA_TCD_DISABLE)>>4)
|
|
|
|
|
|
|
|
|
|
typedef uint32_t sgl_handle_t;
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_PPC4xx_EDMA
|
|
|
|
|
|
|
|
|
|
#define SGL_LIST_SIZE 4096
|
|
|
|
|
#define DMA_PPC4xx_SIZE SGL_LIST_SIZE
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_PRIORITY(x) (((x)&0x3)<<(6-DMA_CR_OFFSET)) /* DMA Channel Priority */
|
|
|
|
|
#define DMA_PRIORITY_MASK SET_DMA_PRIORITY(3)
|
|
|
|
|
#define PRIORITY_LOW 0
|
|
|
|
|
#define PRIORITY_MID_LOW 1
|
|
|
|
|
#define PRIORITY_MID_HIGH 2
|
|
|
|
|
#define PRIORITY_HIGH 3
|
|
|
|
|
#define GET_DMA_PRIORITY(x) (((x)&DMA_PRIORITY_MASK)>>(6-DMA_CR_OFFSET))
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* DMA Polarity Configuration Register
|
|
|
|
|
*/
|
|
|
|
|
#define DMAReq_ActiveLow(chan) (1<<(31-(chan*3)))
|
|
|
|
|
#define DMAAck_ActiveLow(chan) (1<<(30-(chan*3)))
|
|
|
|
|
#define EOT_ActiveLow(chan) (1<<(29-(chan*3))) /* End of Transfer */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* DMA Sleep Mode Register
|
|
|
|
|
*/
|
|
|
|
|
#define SLEEP_MODE_ENABLE (1<<21)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* DMA Status Register
|
|
|
|
|
*/
|
|
|
|
|
#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
|
|
|
|
|
#define DMA_CS1 (1<<30)
|
|
|
|
|
#define DMA_CS2 (1<<29)
|
|
|
|
|
#define DMA_CS3 (1<<28)
|
|
|
|
|
|
|
|
|
|
#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
|
|
|
|
|
#define DMA_TS1 (1<<26)
|
|
|
|
|
#define DMA_TS2 (1<<25)
|
|
|
|
|
#define DMA_TS3 (1<<24)
|
|
|
|
|
|
|
|
|
|
#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
|
|
|
|
|
#define DMA_CH1_ERR (1<<22)
|
|
|
|
|
#define DMA_CH2_ERR (1<<21)
|
|
|
|
|
#define DMA_CH3_ERR (1<<20)
|
|
|
|
|
|
|
|
|
|
#define DMA_IN_DMA_REQ0 (1<<19) /* Internal DMA Request is pending */
|
|
|
|
|
#define DMA_IN_DMA_REQ1 (1<<18)
|
|
|
|
|
#define DMA_IN_DMA_REQ2 (1<<17)
|
|
|
|
|
#define DMA_IN_DMA_REQ3 (1<<16)
|
|
|
|
|
|
|
|
|
|
#define DMA_EXT_DMA_REQ0 (1<<15) /* External DMA Request is pending */
|
|
|
|
|
#define DMA_EXT_DMA_REQ1 (1<<14)
|
|
|
|
|
#define DMA_EXT_DMA_REQ2 (1<<13)
|
|
|
|
|
#define DMA_EXT_DMA_REQ3 (1<<12)
|
|
|
|
|
|
|
|
|
|
#define DMA_CH0_BUSY (1<<11) /* DMA Channel 0 Busy */
|
|
|
|
|
#define DMA_CH1_BUSY (1<<10)
|
|
|
|
|
#define DMA_CH2_BUSY (1<<9)
|
|
|
|
|
#define DMA_CH3_BUSY (1<<8)
|
|
|
|
|
|
|
|
|
|
#define DMA_SG0 (1<<7) /* DMA Channel 0 Scatter/Gather in progress */
|
|
|
|
|
#define DMA_SG1 (1<<6)
|
|
|
|
|
#define DMA_SG2 (1<<5)
|
|
|
|
|
#define DMA_SG3 (1<<4)
|
|
|
|
|
|
|
|
|
|
/* DMA Channel Count Register */
|
|
|
|
|
#define DMA_CTC_BTEN (1<<23) /* Burst Enable/Disable bit */
|
|
|
|
|
#define DMA_CTC_BSIZ_MSK (3<<21) /* Mask of the Burst size bits */
|
|
|
|
|
#define DMA_CTC_BSIZ_2 (0)
|
|
|
|
|
#define DMA_CTC_BSIZ_4 (1<<21)
|
|
|
|
|
#define DMA_CTC_BSIZ_8 (2<<21)
|
|
|
|
|
#define DMA_CTC_BSIZ_16 (3<<21)
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* DMA SG Command Register
|
|
|
|
|
*/
|
|
|
|
|
#define SSG_ENABLE(chan) (1<<(31-chan)) /* Start Scatter Gather */
|
|
|
|
|
#define SSG_MASK_ENABLE(chan) (1<<(15-chan)) /* Enable writing to SSG0 bit */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* DMA Scatter/Gather Descriptor Bit fields
|
|
|
|
|
*/
|
|
|
|
|
#define SG_LINK (1<<31) /* Link */
|
|
|
|
|
#define SG_TCI_ENABLE (1<<29) /* Enable Terminal Count Interrupt */
|
|
|
|
|
#define SG_ETI_ENABLE (1<<28) /* Enable End of Transfer Interrupt */
|
|
|
|
|
#define SG_ERI_ENABLE (1<<27) /* Enable Error Interrupt */
|
|
|
|
|
#define SG_COUNT_MASK 0xFFFF /* Count Field */
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_CONTROL \
|
|
|
|
|
(SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
|
|
|
|
|
SET_DMA_BEN(p_init->buffer_enable) | /* buffer enable */\
|
|
|
|
|
SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
|
|
|
|
|
SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
|
|
|
|
|
SET_DMA_PL(p_init->pl) | /* peripheral location */ \
|
|
|
|
|
SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
|
|
|
|
|
SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
|
|
|
|
|
SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
|
|
|
|
|
SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
|
|
|
|
|
SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
|
|
|
|
|
SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
|
|
|
|
|
SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
|
|
|
|
|
SET_DMA_PREFETCH(p_init->pf) /* read prefetch */)
|
|
|
|
|
|
|
|
|
|
#define GET_DMA_POLARITY(chan) (DMAReq_ActiveLow(chan) | DMAAck_ActiveLow(chan) | EOT_ActiveLow(chan))
|
|
|
|
|
|
2005-08-18 12:24:25 -06:00
|
|
|
#elif defined(CONFIG_STB03xxx) /* stb03xxx */
|
2005-04-16 16:20:36 -06:00
|
|
|
|
|
|
|
|
#define DMA_PPC4xx_SIZE 4096
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* DMA Status Register
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_PRIORITY(x) (((x)&0x00800001)) /* DMA Channel Priority */
|
|
|
|
|
#define DMA_PRIORITY_MASK 0x00800001
|
|
|
|
|
#define PRIORITY_LOW 0x00000000
|
|
|
|
|
#define PRIORITY_MID_LOW 0x00000001
|
|
|
|
|
#define PRIORITY_MID_HIGH 0x00800000
|
|
|
|
|
#define PRIORITY_HIGH 0x00800001
|
|
|
|
|
#define GET_DMA_PRIORITY(x) (((((x)&DMA_PRIORITY_MASK) &0x00800000) >> 22 ) | (((x)&DMA_PRIORITY_MASK) &0x00000001))
|
|
|
|
|
|
|
|
|
|
#define DMA_CS0 (1<<31) /* Terminal Count has been reached */
|
|
|
|
|
#define DMA_CS1 (1<<30)
|
|
|
|
|
#define DMA_CS2 (1<<29)
|
|
|
|
|
#define DMA_CS3 (1<<28)
|
|
|
|
|
|
|
|
|
|
#define DMA_TS0 (1<<27) /* End of Transfer has been requested */
|
|
|
|
|
#define DMA_TS1 (1<<26)
|
|
|
|
|
#define DMA_TS2 (1<<25)
|
|
|
|
|
#define DMA_TS3 (1<<24)
|
|
|
|
|
|
|
|
|
|
#define DMA_CH0_ERR (1<<23) /* DMA Chanel 0 Error */
|
|
|
|
|
#define DMA_CH1_ERR (1<<22)
|
|
|
|
|
#define DMA_CH2_ERR (1<<21)
|
|
|
|
|
#define DMA_CH3_ERR (1<<20)
|
|
|
|
|
|
|
|
|
|
#define DMA_CT0 (1<<19) /* Chained transfere */
|
|
|
|
|
|
|
|
|
|
#define DMA_IN_DMA_REQ0 (1<<18) /* Internal DMA Request is pending */
|
|
|
|
|
#define DMA_IN_DMA_REQ1 (1<<17)
|
|
|
|
|
#define DMA_IN_DMA_REQ2 (1<<16)
|
|
|
|
|
#define DMA_IN_DMA_REQ3 (1<<15)
|
|
|
|
|
|
|
|
|
|
#define DMA_EXT_DMA_REQ0 (1<<14) /* External DMA Request is pending */
|
|
|
|
|
#define DMA_EXT_DMA_REQ1 (1<<13)
|
|
|
|
|
#define DMA_EXT_DMA_REQ2 (1<<12)
|
|
|
|
|
#define DMA_EXT_DMA_REQ3 (1<<11)
|
|
|
|
|
|
|
|
|
|
#define DMA_CH0_BUSY (1<<10) /* DMA Channel 0 Busy */
|
|
|
|
|
#define DMA_CH1_BUSY (1<<9)
|
|
|
|
|
#define DMA_CH2_BUSY (1<<8)
|
|
|
|
|
#define DMA_CH3_BUSY (1<<7)
|
|
|
|
|
|
|
|
|
|
#define DMA_CT1 (1<<6) /* Chained transfere */
|
|
|
|
|
#define DMA_CT2 (1<<5)
|
|
|
|
|
#define DMA_CT3 (1<<4)
|
|
|
|
|
|
|
|
|
|
#define DMA_CH_ENABLE (1<<7)
|
|
|
|
|
#define SET_DMA_CH(x) (((x)&0x1)<<7)
|
|
|
|
|
#define GET_DMA_CH(x) (((x)&DMA_CH_ENABLE)>>7)
|
|
|
|
|
|
|
|
|
|
/* STBx25xxx dma unique */
|
|
|
|
|
/* enable device port on a dma channel
|
|
|
|
|
* example ext 0 on dma 1
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define SSP0_RECV 15
|
|
|
|
|
#define SSP0_XMIT 14
|
|
|
|
|
#define EXT_DMA_0 12
|
|
|
|
|
#define SC1_XMIT 11
|
|
|
|
|
#define SC1_RECV 10
|
|
|
|
|
#define EXT_DMA_2 9
|
|
|
|
|
#define EXT_DMA_3 8
|
|
|
|
|
#define SERIAL2_XMIT 7
|
|
|
|
|
#define SERIAL2_RECV 6
|
|
|
|
|
#define SC0_XMIT 5
|
|
|
|
|
#define SC0_RECV 4
|
|
|
|
|
#define SERIAL1_XMIT 3
|
|
|
|
|
#define SERIAL1_RECV 2
|
|
|
|
|
#define SERIAL0_XMIT 1
|
|
|
|
|
#define SERIAL0_RECV 0
|
|
|
|
|
|
|
|
|
|
#define DMA_CHAN_0 1
|
|
|
|
|
#define DMA_CHAN_1 2
|
|
|
|
|
#define DMA_CHAN_2 3
|
|
|
|
|
#define DMA_CHAN_3 4
|
|
|
|
|
|
|
|
|
|
/* end STBx25xx */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Bit 30 must be one for Redwoods, otherwise transfers may receive errors.
|
|
|
|
|
*/
|
|
|
|
|
#define DMA_CR_MB0 0x2
|
|
|
|
|
|
|
|
|
|
#define SET_DMA_CONTROL \
|
|
|
|
|
(SET_DMA_CIE_ENABLE(p_init->int_enable) | /* interrupt enable */ \
|
|
|
|
|
SET_DMA_ETD(p_init->etd_output) | /* end of transfer pin */ \
|
|
|
|
|
SET_DMA_TCE(p_init->tce_enable) | /* terminal count enable */ \
|
|
|
|
|
SET_DMA_PL(p_init->pl) | /* peripheral location */ \
|
|
|
|
|
SET_DMA_DAI(p_init->dai) | /* dest addr increment */ \
|
|
|
|
|
SET_DMA_SAI(p_init->sai) | /* src addr increment */ \
|
|
|
|
|
SET_DMA_PRIORITY(p_init->cp) | /* channel priority */ \
|
|
|
|
|
SET_DMA_PW(p_init->pwidth) | /* peripheral/bus width */ \
|
|
|
|
|
SET_DMA_PSC(p_init->psc) | /* peripheral setup cycles */ \
|
|
|
|
|
SET_DMA_PWC(p_init->pwc) | /* peripheral wait cycles */ \
|
|
|
|
|
SET_DMA_PHC(p_init->phc) | /* peripheral hold cycles */ \
|
|
|
|
|
SET_DMA_TCD(p_init->tcd_disable) | /* TC chain mode disable */ \
|
|
|
|
|
SET_DMA_ECE(p_init->ece_enable) | /* ECE chanin mode enable */ \
|
|
|
|
|
SET_DMA_CH(p_init->ch_enable) | /* Chain enable */ \
|
|
|
|
|
DMA_CR_MB0 /* must be one */)
|
|
|
|
|
|
|
|
|
|
#define GET_DMA_POLARITY(chan) chan
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
|
unsigned short in_use; /* set when channel is being used, clr when
|
|
|
|
|
* available.
|
|
|
|
|
*/
|
|
|
|
|
/*
|
|
|
|
|
* Valid polarity settings:
|
|
|
|
|
* DMAReq_ActiveLow(n)
|
|
|
|
|
* DMAAck_ActiveLow(n)
|
|
|
|
|
* EOT_ActiveLow(n)
|
|
|
|
|
*
|
|
|
|
|
* n is 0 to max dma chans
|
|
|
|
|
*/
|
|
|
|
|
unsigned int polarity;
|
|
|
|
|
|
|
|
|
|
char buffer_enable; /* Boolean: buffer enable */
|
|
|
|
|
char tce_enable; /* Boolean: terminal count enable */
|
|
|
|
|
char etd_output; /* Boolean: eot pin is a tc output */
|
|
|
|
|
char pce; /* Boolean: parity check enable */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Peripheral location:
|
|
|
|
|
* INTERNAL_PERIPHERAL (UART0 on the 405GP)
|
|
|
|
|
* EXTERNAL_PERIPHERAL
|
|
|
|
|
*/
|
|
|
|
|
char pl; /* internal/external peripheral */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Valid pwidth settings:
|
|
|
|
|
* PW_8
|
|
|
|
|
* PW_16
|
|
|
|
|
* PW_32
|
|
|
|
|
* PW_64
|
|
|
|
|
*/
|
|
|
|
|
unsigned int pwidth;
|
|
|
|
|
|
|
|
|
|
char dai; /* Boolean: dst address increment */
|
|
|
|
|
char sai; /* Boolean: src address increment */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Valid psc settings: 0-3
|
|
|
|
|
*/
|
|
|
|
|
unsigned int psc; /* Peripheral Setup Cycles */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Valid pwc settings:
|
|
|
|
|
* 0-63
|
|
|
|
|
*/
|
|
|
|
|
unsigned int pwc; /* Peripheral Wait Cycles */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Valid phc settings:
|
|
|
|
|
* 0-7
|
|
|
|
|
*/
|
|
|
|
|
unsigned int phc; /* Peripheral Hold Cycles */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Valid cp (channel priority) settings:
|
|
|
|
|
* PRIORITY_LOW
|
|
|
|
|
* PRIORITY_MID_LOW
|
|
|
|
|
* PRIORITY_MID_HIGH
|
|
|
|
|
* PRIORITY_HIGH
|
|
|
|
|
*/
|
|
|
|
|
unsigned int cp; /* channel priority */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Valid pf (memory read prefetch) settings:
|
|
|
|
|
*
|
|
|
|
|
* PREFETCH_1
|
|
|
|
|
* PREFETCH_2
|
|
|
|
|
* PREFETCH_4
|
|
|
|
|
*/
|
|
|
|
|
unsigned int pf; /* memory read prefetch */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Boolean: channel interrupt enable
|
|
|
|
|
* NOTE: for sgl transfers, only the last descriptor will be setup to
|
|
|
|
|
* interrupt.
|
|
|
|
|
*/
|
|
|
|
|
char int_enable;
|
|
|
|
|
|
|
|
|
|
char shift; /* easy access to byte_count shift, based on */
|
|
|
|
|
/* the width of the channel */
|
|
|
|
|
|
|
|
|
|
uint32_t control; /* channel control word */
|
|
|
|
|
|
|
|
|
|
/* These variabled are used ONLY in single dma transfers */
|
|
|
|
|
unsigned int mode; /* transfer mode */
|
|
|
|
|
phys_addr_t addr;
|
|
|
|
|
char ce; /* channel enable */
|
|
|
|
|
#ifdef CONFIG_STB03xxx
|
|
|
|
|
char ch_enable;
|
|
|
|
|
char tcd_disable;
|
|
|
|
|
char ece_enable;
|
|
|
|
|
char td; /* transfer direction */
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
char int_on_final_sg;/* for scatter/gather - only interrupt on last sg */
|
|
|
|
|
} ppc_dma_ch_t;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* PPC44x DMA implementations have a slightly different
|
|
|
|
|
* descriptor layout. Probably moved about due to the
|
|
|
|
|
* change to 64-bit addresses and link pointer. I don't
|
|
|
|
|
* know why they didn't just leave control_count after
|
|
|
|
|
* the dst_addr.
|
|
|
|
|
*/
|
|
|
|
|
#ifdef PPC4xx_DMA_64BIT
|
|
|
|
|
typedef struct {
|
|
|
|
|
uint32_t control;
|
|
|
|
|
uint32_t control_count;
|
|
|
|
|
phys_addr_t src_addr;
|
|
|
|
|
phys_addr_t dst_addr;
|
|
|
|
|
phys_addr_t next;
|
|
|
|
|
} ppc_sgl_t;
|
|
|
|
|
#else
|
|
|
|
|
typedef struct {
|
|
|
|
|
uint32_t control;
|
|
|
|
|
phys_addr_t src_addr;
|
|
|
|
|
phys_addr_t dst_addr;
|
|
|
|
|
uint32_t control_count;
|
|
|
|
|
uint32_t next;
|
|
|
|
|
} ppc_sgl_t;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
|
unsigned int dmanr;
|
|
|
|
|
uint32_t control; /* channel ctrl word; loaded from each descrptr */
|
|
|
|
|
uint32_t sgl_control; /* LK, TCI, ETI, and ERI bits in sgl descriptor */
|
|
|
|
|
dma_addr_t dma_addr; /* dma (physical) address of this list */
|
|
|
|
|
ppc_sgl_t *phead;
|
|
|
|
|
dma_addr_t phead_dma;
|
|
|
|
|
ppc_sgl_t *ptail;
|
|
|
|
|
dma_addr_t ptail_dma;
|
|
|
|
|
} sgl_list_info_t;
|
|
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
|
phys_addr_t *src_addr;
|
|
|
|
|
phys_addr_t *dst_addr;
|
|
|
|
|
phys_addr_t dma_src_addr;
|
|
|
|
|
phys_addr_t dma_dst_addr;
|
|
|
|
|
} pci_alloc_desc_t;
|
|
|
|
|
|
|
|
|
|
extern ppc_dma_ch_t dma_channels[];
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The DMA API are in ppc4xx_dma.c and ppc4xx_sgdma.c
|
|
|
|
|
*/
|
|
|
|
|
extern int ppc4xx_init_dma_channel(unsigned int, ppc_dma_ch_t *);
|
|
|
|
|
extern int ppc4xx_get_channel_config(unsigned int, ppc_dma_ch_t *);
|
|
|
|
|
extern int ppc4xx_set_channel_priority(unsigned int, unsigned int);
|
|
|
|
|
extern unsigned int ppc4xx_get_peripheral_width(unsigned int);
|
|
|
|
|
extern void ppc4xx_set_sg_addr(int, phys_addr_t);
|
|
|
|
|
extern int ppc4xx_add_dma_sgl(sgl_handle_t, phys_addr_t, phys_addr_t, unsigned int);
|
|
|
|
|
extern void ppc4xx_enable_dma_sgl(sgl_handle_t);
|
|
|
|
|
extern void ppc4xx_disable_dma_sgl(sgl_handle_t);
|
|
|
|
|
extern int ppc4xx_get_dma_sgl_residue(sgl_handle_t, phys_addr_t *, phys_addr_t *);
|
|
|
|
|
extern int ppc4xx_delete_dma_sgl_element(sgl_handle_t, phys_addr_t *, phys_addr_t *);
|
|
|
|
|
extern int ppc4xx_alloc_dma_handle(sgl_handle_t *, unsigned int, unsigned int);
|
|
|
|
|
extern void ppc4xx_free_dma_handle(sgl_handle_t);
|
|
|
|
|
extern int ppc4xx_get_dma_status(void);
|
|
|
|
|
extern int ppc4xx_enable_burst(unsigned int);
|
|
|
|
|
extern int ppc4xx_disable_burst(unsigned int);
|
|
|
|
|
extern int ppc4xx_set_burst_size(unsigned int, unsigned int);
|
|
|
|
|
extern void ppc4xx_set_src_addr(int dmanr, phys_addr_t src_addr);
|
|
|
|
|
extern void ppc4xx_set_dst_addr(int dmanr, phys_addr_t dst_addr);
|
|
|
|
|
extern void ppc4xx_enable_dma(unsigned int dmanr);
|
|
|
|
|
extern void ppc4xx_disable_dma(unsigned int dmanr);
|
|
|
|
|
extern void ppc4xx_set_dma_count(unsigned int dmanr, unsigned int count);
|
|
|
|
|
extern int ppc4xx_get_dma_residue(unsigned int dmanr);
|
|
|
|
|
extern void ppc4xx_set_dma_addr2(unsigned int dmanr, phys_addr_t src_dma_addr,
|
|
|
|
|
phys_addr_t dst_dma_addr);
|
|
|
|
|
extern int ppc4xx_enable_dma_interrupt(unsigned int dmanr);
|
|
|
|
|
extern int ppc4xx_disable_dma_interrupt(unsigned int dmanr);
|
|
|
|
|
extern int ppc4xx_clr_dma_status(unsigned int dmanr);
|
|
|
|
|
extern int ppc4xx_map_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
|
|
|
|
|
extern int ppc4xx_disable_dma_port(unsigned int dmanr, unsigned int ocp_dma,short dma_chan);
|
|
|
|
|
extern int ppc4xx_set_dma_mode(unsigned int dmanr, unsigned int mode);
|
|
|
|
|
|
|
|
|
|
/* These are in kernel/dma.c: */
|
|
|
|
|
|
|
|
|
|
/* reserve a DMA channel */
|
|
|
|
|
extern int request_dma(unsigned int dmanr, const char *device_id);
|
|
|
|
|
/* release it again */
|
|
|
|
|
extern void free_dma(unsigned int dmanr);
|
|
|
|
|
#endif
|
|
|
|
|
#endif /* __KERNEL__ */
|
