kernel-fxtec-pro1x/net/mac80211/ht.c

255 lines
7.5 KiB
C
Raw Normal View History

/*
* HT handling
*
* Copyright 2003, Jouni Malinen <jkmaline@cc.hut.fi>
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
* Copyright 2007, Michael Wu <flamingice@sourmilk.net>
* Copyright 2007-2008, Intel Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/ieee80211.h>
#include <net/wireless.h>
#include <net/mac80211.h>
#include "ieee80211_i.h"
#include "rate.h"
void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_supported_band *sband,
struct ieee80211_ht_cap *ht_cap_ie,
struct ieee80211_sta_ht_cap *ht_cap)
{
u8 ampdu_info, tx_mcs_set_cap;
int i, max_tx_streams;
BUG_ON(!ht_cap);
memset(ht_cap, 0, sizeof(*ht_cap));
if (!ht_cap_ie)
return;
ht_cap->ht_supported = true;
ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & sband->ht_cap.cap;
ht_cap->cap &= ~IEEE80211_HT_CAP_SM_PS;
ht_cap->cap |= sband->ht_cap.cap & IEEE80211_HT_CAP_SM_PS;
ampdu_info = ht_cap_ie->ampdu_params_info;
ht_cap->ampdu_factor =
ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR;
ht_cap->ampdu_density =
(ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2;
/* own MCS TX capabilities */
tx_mcs_set_cap = sband->ht_cap.mcs.tx_params;
/* can we TX with MCS rates? */
if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED))
return;
/* Counting from 0, therefore +1 */
if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF)
max_tx_streams =
((tx_mcs_set_cap & IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT) + 1;
else
max_tx_streams = IEEE80211_HT_MCS_TX_MAX_STREAMS;
/*
* 802.11n D5.0 20.3.5 / 20.6 says:
* - indices 0 to 7 and 32 are single spatial stream
* - 8 to 31 are multiple spatial streams using equal modulation
* [8..15 for two streams, 16..23 for three and 24..31 for four]
* - remainder are multiple spatial streams using unequal modulation
*/
for (i = 0; i < max_tx_streams; i++)
ht_cap->mcs.rx_mask[i] =
sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i];
if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION)
for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE;
i < IEEE80211_HT_MCS_MASK_LEN; i++)
ht_cap->mcs.rx_mask[i] =
sband->ht_cap.mcs.rx_mask[i] &
ht_cap_ie->mcs.rx_mask[i];
/* handle MCS rate 32 too */
if (sband->ht_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1)
ht_cap->mcs.rx_mask[32/8] |= 1;
}
/*
* ieee80211_enable_ht should be called only after the operating band
* has been determined as ht configuration depends on the hw's
* HT abilities for a specific band.
*/
u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
struct ieee80211_ht_info *hti,
u16 ap_ht_cap_flags)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_supported_band *sband;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
struct ieee80211_bss_ht_conf ht;
struct sta_info *sta;
u32 changed = 0;
bool enable_ht = true, ht_changed;
enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
memset(&ht, 0, sizeof(ht));
/* HT is not supported */
if (!sband->ht_cap.ht_supported)
enable_ht = false;
/* check that channel matches the right operating channel */
if (local->hw.conf.channel->center_freq !=
ieee80211_channel_to_frequency(hti->control_chan))
enable_ht = false;
if (enable_ht) {
channel_type = NL80211_CHAN_HT20;
if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
(sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
(hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
channel_type = NL80211_CHAN_HT40PLUS;
break;
case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
channel_type = NL80211_CHAN_HT40MINUS;
break;
}
}
}
ht_changed = conf_is_ht(&local->hw.conf) != enable_ht ||
channel_type != local->hw.conf.channel_type;
local->oper_channel_type = channel_type;
if (ht_changed) {
/* channel_type change automatically detected */
ieee80211_hw_config(local, 0);
rcu_read_lock();
sta = sta_info_get(local, ifmgd->bssid);
if (sta)
rate_control_rate_update(local, sband, sta,
IEEE80211_RC_HT_CHANGED);
rcu_read_unlock();
}
/* disable HT */
if (!enable_ht)
return 0;
ht.operation_mode = le16_to_cpu(hti->operation_mode);
/* if bss configuration changed store the new one */
if (memcmp(&sdata->vif.bss_conf.ht, &ht, sizeof(ht))) {
changed |= BSS_CHANGED_HT;
sdata->vif.bss_conf.ht = ht;
}
return changed;
}
void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta)
{
int i;
for (i = 0; i < STA_TID_NUM; i++) {
__ieee80211_stop_tx_ba_session(sta, i, WLAN_BACK_INITIATOR);
__ieee80211_stop_rx_ba_session(sta, i, WLAN_BACK_RECIPIENT,
WLAN_REASON_QSTA_LEAVE_QBSS);
}
}
void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata,
const u8 *da, u16 tid,
u16 initiator, u16 reason_code)
{
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u16 params;
skb = dev_alloc_skb(sizeof(*mgmt) + local->hw.extra_tx_headroom);
if (!skb) {
printk(KERN_ERR "%s: failed to allocate buffer "
"for delba frame\n", sdata->dev->name);
return;
}
skb_reserve(skb, local->hw.extra_tx_headroom);
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
memset(mgmt, 0, 24);
memcpy(mgmt->da, da, ETH_ALEN);
memcpy(mgmt->sa, sdata->dev->dev_addr, ETH_ALEN);
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
memcpy(mgmt->bssid, sdata->dev->dev_addr, ETH_ALEN);
else if (sdata->vif.type == NL80211_IFTYPE_STATION)
memcpy(mgmt->bssid, sdata->u.mgd.bssid, ETH_ALEN);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_ACTION);
skb_put(skb, 1 + sizeof(mgmt->u.action.u.delba));
mgmt->u.action.category = WLAN_CATEGORY_BACK;
mgmt->u.action.u.delba.action_code = WLAN_ACTION_DELBA;
params = (u16)(initiator << 11); /* bit 11 initiator */
params |= (u16)(tid << 12); /* bit 15:12 TID number */
mgmt->u.action.u.delba.params = cpu_to_le16(params);
mgmt->u.action.u.delba.reason_code = cpu_to_le16(reason_code);
ieee80211_tx_skb(sdata, skb, 1);
}
void ieee80211_process_delba(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_local *local = sdata->local;
u16 tid, params;
u16 initiator;
params = le16_to_cpu(mgmt->u.action.u.delba.params);
tid = (params & IEEE80211_DELBA_PARAM_TID_MASK) >> 12;
initiator = (params & IEEE80211_DELBA_PARAM_INITIATOR_MASK) >> 11;
#ifdef CONFIG_MAC80211_HT_DEBUG
if (net_ratelimit())
printk(KERN_DEBUG "delba from %pM (%s) tid %d reason code %d\n",
mgmt->sa, initiator ? "initiator" : "recipient", tid,
mgmt->u.action.u.delba.reason_code);
#endif /* CONFIG_MAC80211_HT_DEBUG */
if (initiator == WLAN_BACK_INITIATOR)
ieee80211_sta_stop_rx_ba_session(sdata, sta->sta.addr, tid,
WLAN_BACK_INITIATOR, 0);
else { /* WLAN_BACK_RECIPIENT */
spin_lock_bh(&sta->lock);
sta->ampdu_mlme.tid_state_tx[tid] =
HT_AGG_STATE_OPERATIONAL;
spin_unlock_bh(&sta->lock);
ieee80211_stop_tx_ba_session(&local->hw, sta->sta.addr, tid,
WLAN_BACK_RECIPIENT);
}
}