kernel-fxtec-pro1x/arch/arm/mach-kirkwood/common.c

1057 lines
27 KiB
C
Raw Normal View History

/*
* arch/arm/mach-kirkwood/common.c
*
* Core functions for Marvell Kirkwood SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/mbus.h>
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
#include <linux/mtd/nand.h>
#include <linux/spi/orion_spi.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <asm/timex.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
#include <mach/bridge-regs.h>
#include <plat/audio.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/mvsdio.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
#include <plat/orion_wdt.h>
#include <plat/time.h>
#include "common.h"
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
static struct map_desc kirkwood_io_desc[] __initdata = {
{
.virtual = KIRKWOOD_PCIE_IO_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_PCIE_IO_PHYS_BASE),
.length = KIRKWOOD_PCIE_IO_SIZE,
.type = MT_DEVICE,
}, {
.virtual = KIRKWOOD_PCIE1_IO_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_PCIE1_IO_PHYS_BASE),
.length = KIRKWOOD_PCIE1_IO_SIZE,
.type = MT_DEVICE,
}, {
.virtual = KIRKWOOD_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(KIRKWOOD_REGS_PHYS_BASE),
.length = KIRKWOOD_REGS_SIZE,
.type = MT_DEVICE,
},
};
void __init kirkwood_map_io(void)
{
iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
}
/*
* Default clock control bits. Any bit _not_ set in this variable
* will be cleared from the hardware after platform devices have been
* registered. Some reserved bits must be set to 1.
*/
unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
/*****************************************************************************
* EHCI
****************************************************************************/
static struct orion_ehci_data kirkwood_ehci_data = {
.dram = &kirkwood_mbus_dram_info,
.phy_version = EHCI_PHY_NA,
};
static u64 ehci_dmamask = 0xffffffffUL;
/*****************************************************************************
* EHCI0
****************************************************************************/
static struct resource kirkwood_ehci_resources[] = {
{
.start = USB_PHYS_BASE,
.end = USB_PHYS_BASE + 0x0fff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_KIRKWOOD_USB,
.end = IRQ_KIRKWOOD_USB,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_ehci = {
.name = "orion-ehci",
.id = 0,
.dev = {
.dma_mask = &ehci_dmamask,
.coherent_dma_mask = 0xffffffff,
.platform_data = &kirkwood_ehci_data,
},
.resource = kirkwood_ehci_resources,
.num_resources = ARRAY_SIZE(kirkwood_ehci_resources),
};
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
platform_device_register(&kirkwood_ehci);
}
/*****************************************************************************
* GE00
****************************************************************************/
struct mv643xx_eth_shared_platform_data kirkwood_ge00_shared_data = {
.dram = &kirkwood_mbus_dram_info,
};
static struct resource kirkwood_ge00_shared_resources[] = {
{
.name = "ge00 base",
.start = GE00_PHYS_BASE + 0x2000,
.end = GE00_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
}, {
.name = "ge00 err irq",
.start = IRQ_KIRKWOOD_GE00_ERR,
.end = IRQ_KIRKWOOD_GE00_ERR,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_ge00_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 0,
.dev = {
.platform_data = &kirkwood_ge00_shared_data,
},
.num_resources = ARRAY_SIZE(kirkwood_ge00_shared_resources),
.resource = kirkwood_ge00_shared_resources,
};
static struct resource kirkwood_ge00_resources[] = {
{
.name = "ge00 irq",
.start = IRQ_KIRKWOOD_GE00_SUM,
.end = IRQ_KIRKWOOD_GE00_SUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_ge00 = {
.name = MV643XX_ETH_NAME,
.id = 0,
.num_resources = 1,
.resource = kirkwood_ge00_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
kirkwood_clk_ctrl |= CGC_GE0;
eth_data->shared = &kirkwood_ge00_shared;
kirkwood_ge00.dev.platform_data = eth_data;
platform_device_register(&kirkwood_ge00_shared);
platform_device_register(&kirkwood_ge00);
}
/*****************************************************************************
* GE01
****************************************************************************/
struct mv643xx_eth_shared_platform_data kirkwood_ge01_shared_data = {
.dram = &kirkwood_mbus_dram_info,
.shared_smi = &kirkwood_ge00_shared,
};
static struct resource kirkwood_ge01_shared_resources[] = {
{
.name = "ge01 base",
.start = GE01_PHYS_BASE + 0x2000,
.end = GE01_PHYS_BASE + 0x3fff,
.flags = IORESOURCE_MEM,
}, {
.name = "ge01 err irq",
.start = IRQ_KIRKWOOD_GE01_ERR,
.end = IRQ_KIRKWOOD_GE01_ERR,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_ge01_shared = {
.name = MV643XX_ETH_SHARED_NAME,
.id = 1,
.dev = {
.platform_data = &kirkwood_ge01_shared_data,
},
.num_resources = ARRAY_SIZE(kirkwood_ge01_shared_resources),
.resource = kirkwood_ge01_shared_resources,
};
static struct resource kirkwood_ge01_resources[] = {
{
.name = "ge01 irq",
.start = IRQ_KIRKWOOD_GE01_SUM,
.end = IRQ_KIRKWOOD_GE01_SUM,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_ge01 = {
.name = MV643XX_ETH_NAME,
.id = 1,
.num_resources = 1,
.resource = kirkwood_ge01_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
kirkwood_clk_ctrl |= CGC_GE1;
eth_data->shared = &kirkwood_ge01_shared;
kirkwood_ge01.dev.platform_data = eth_data;
platform_device_register(&kirkwood_ge01_shared);
platform_device_register(&kirkwood_ge01);
}
/*****************************************************************************
* Ethernet switch
****************************************************************************/
static struct resource kirkwood_switch_resources[] = {
{
.start = 0,
.end = 0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_switch_device = {
.name = "dsa",
.id = 0,
.num_resources = 0,
.resource = kirkwood_switch_resources,
};
void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq)
{
dsa: add switch chip cascading support The initial version of the DSA driver only supported a single switch chip per network interface, while DSA-capable switch chips can be interconnected to form a tree of switch chips. This patch adds support for multiple switch chips on a network interface. An example topology for a 16-port device with an embedded CPU is as follows: +-----+ +--------+ +--------+ | |eth0 10| switch |9 10| switch | | CPU +----------+ +-------+ | | | | chip 0 | | chip 1 | +-----+ +---++---+ +---++---+ || || || || ||1000baseT ||1000baseT ||ports 1-8 ||ports 9-16 This requires a couple of interdependent changes in the DSA layer: - The dsa platform driver data needs to be extended: there is still only one netdevice per DSA driver instance (eth0 in the example above), but each of the switch chips in the tree needs its own mii_bus device pointer, MII management bus address, and port name array. (include/net/dsa.h) The existing in-tree dsa users need some small changes to deal with this. (arch/arm) - The DSA and Ethertype DSA tagging modules need to be extended to use the DSA device ID field on receive and demultiplex the packet accordingly, and fill in the DSA device ID field on transmit according to which switch chip the packet is heading to. (net/dsa/tag_{dsa,edsa}.c) - The concept of "CPU port", which is the switch chip port that the CPU is connected to (port 10 on switch chip 0 in the example), needs to be extended with the concept of "upstream port", which is the port on the switch chip that will bring us one hop closer to the CPU (port 10 for both switch chips in the example above). - The dsa platform data needs to specify which ports on which switch chips are links to other switch chips, so that we can enable DSA tagging mode on them. (For inter-switch links, we always use non-EtherType DSA tagging, since it has lower overhead. The CPU link uses dsa or edsa tagging depending on what the 'root' switch chip supports.) This is done by specifying "dsa" for the given port in the port array. - The dsa platform data needs to be extended with information on via which port to reach any given switch chip from any given switch chip. This info is specified via the per-switch chip data struct ->rtable[] array, which gives the nexthop ports for each of the other switches in the tree. For the example topology above, the dsa platform data would look something like this: static struct dsa_chip_data sw[2] = { { .mii_bus = &foo, .sw_addr = 1, .port_names[0] = "p1", .port_names[1] = "p2", .port_names[2] = "p3", .port_names[3] = "p4", .port_names[4] = "p5", .port_names[5] = "p6", .port_names[6] = "p7", .port_names[7] = "p8", .port_names[9] = "dsa", .port_names[10] = "cpu", .rtable = (s8 []){ -1, 9, }, }, { .mii_bus = &foo, .sw_addr = 2, .port_names[0] = "p9", .port_names[1] = "p10", .port_names[2] = "p11", .port_names[3] = "p12", .port_names[4] = "p13", .port_names[5] = "p14", .port_names[6] = "p15", .port_names[7] = "p16", .port_names[10] = "dsa", .rtable = (s8 []){ 10, -1, }, }, }, static struct dsa_platform_data pd = { .netdev = &foo, .nr_switches = 2, .sw = sw, }; Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20 03:52:09 -06:00
int i;
if (irq != NO_IRQ) {
kirkwood_switch_resources[0].start = irq;
kirkwood_switch_resources[0].end = irq;
kirkwood_switch_device.num_resources = 1;
}
d->netdev = &kirkwood_ge00.dev;
dsa: add switch chip cascading support The initial version of the DSA driver only supported a single switch chip per network interface, while DSA-capable switch chips can be interconnected to form a tree of switch chips. This patch adds support for multiple switch chips on a network interface. An example topology for a 16-port device with an embedded CPU is as follows: +-----+ +--------+ +--------+ | |eth0 10| switch |9 10| switch | | CPU +----------+ +-------+ | | | | chip 0 | | chip 1 | +-----+ +---++---+ +---++---+ || || || || ||1000baseT ||1000baseT ||ports 1-8 ||ports 9-16 This requires a couple of interdependent changes in the DSA layer: - The dsa platform driver data needs to be extended: there is still only one netdevice per DSA driver instance (eth0 in the example above), but each of the switch chips in the tree needs its own mii_bus device pointer, MII management bus address, and port name array. (include/net/dsa.h) The existing in-tree dsa users need some small changes to deal with this. (arch/arm) - The DSA and Ethertype DSA tagging modules need to be extended to use the DSA device ID field on receive and demultiplex the packet accordingly, and fill in the DSA device ID field on transmit according to which switch chip the packet is heading to. (net/dsa/tag_{dsa,edsa}.c) - The concept of "CPU port", which is the switch chip port that the CPU is connected to (port 10 on switch chip 0 in the example), needs to be extended with the concept of "upstream port", which is the port on the switch chip that will bring us one hop closer to the CPU (port 10 for both switch chips in the example above). - The dsa platform data needs to specify which ports on which switch chips are links to other switch chips, so that we can enable DSA tagging mode on them. (For inter-switch links, we always use non-EtherType DSA tagging, since it has lower overhead. The CPU link uses dsa or edsa tagging depending on what the 'root' switch chip supports.) This is done by specifying "dsa" for the given port in the port array. - The dsa platform data needs to be extended with information on via which port to reach any given switch chip from any given switch chip. This info is specified via the per-switch chip data struct ->rtable[] array, which gives the nexthop ports for each of the other switches in the tree. For the example topology above, the dsa platform data would look something like this: static struct dsa_chip_data sw[2] = { { .mii_bus = &foo, .sw_addr = 1, .port_names[0] = "p1", .port_names[1] = "p2", .port_names[2] = "p3", .port_names[3] = "p4", .port_names[4] = "p5", .port_names[5] = "p6", .port_names[6] = "p7", .port_names[7] = "p8", .port_names[9] = "dsa", .port_names[10] = "cpu", .rtable = (s8 []){ -1, 9, }, }, { .mii_bus = &foo, .sw_addr = 2, .port_names[0] = "p9", .port_names[1] = "p10", .port_names[2] = "p11", .port_names[3] = "p12", .port_names[4] = "p13", .port_names[5] = "p14", .port_names[6] = "p15", .port_names[7] = "p16", .port_names[10] = "dsa", .rtable = (s8 []){ 10, -1, }, }, }, static struct dsa_platform_data pd = { .netdev = &foo, .nr_switches = 2, .sw = sw, }; Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Gary Thomas <gary@mlbassoc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-03-20 03:52:09 -06:00
for (i = 0; i < d->nr_chips; i++)
d->chip[i].mii_bus = &kirkwood_ge00_shared.dev;
kirkwood_switch_device.dev.platform_data = d;
platform_device_register(&kirkwood_switch_device);
}
/*****************************************************************************
* NAND flash
****************************************************************************/
static struct resource kirkwood_nand_resource = {
.flags = IORESOURCE_MEM,
.start = KIRKWOOD_NAND_MEM_PHYS_BASE,
.end = KIRKWOOD_NAND_MEM_PHYS_BASE +
KIRKWOOD_NAND_MEM_SIZE - 1,
};
static struct orion_nand_data kirkwood_nand_data = {
.cle = 0,
.ale = 1,
.width = 8,
};
static struct platform_device kirkwood_nand_flash = {
.name = "orion_nand",
.id = -1,
.dev = {
.platform_data = &kirkwood_nand_data,
},
.resource = &kirkwood_nand_resource,
.num_resources = 1,
};
void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
int chip_delay)
{
kirkwood_clk_ctrl |= CGC_RUNIT;
kirkwood_nand_data.parts = parts;
kirkwood_nand_data.nr_parts = nr_parts;
kirkwood_nand_data.chip_delay = chip_delay;
platform_device_register(&kirkwood_nand_flash);
}
void __init kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts,
int (*dev_ready)(struct mtd_info *))
{
kirkwood_clk_ctrl |= CGC_RUNIT;
kirkwood_nand_data.parts = parts;
kirkwood_nand_data.nr_parts = nr_parts;
kirkwood_nand_data.dev_ready = dev_ready;
platform_device_register(&kirkwood_nand_flash);
}
/*****************************************************************************
* SoC RTC
****************************************************************************/
static struct resource kirkwood_rtc_resource = {
.start = RTC_PHYS_BASE,
.end = RTC_PHYS_BASE + SZ_16 - 1,
.flags = IORESOURCE_MEM,
};
static void __init kirkwood_rtc_init(void)
{
platform_device_register_simple("rtc-mv", -1, &kirkwood_rtc_resource, 1);
}
/*****************************************************************************
* SATA
****************************************************************************/
static struct resource kirkwood_sata_resources[] = {
{
.name = "sata base",
.start = SATA_PHYS_BASE,
.end = SATA_PHYS_BASE + 0x5000 - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "sata irq",
.start = IRQ_KIRKWOOD_SATA,
.end = IRQ_KIRKWOOD_SATA,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_sata = {
.name = "sata_mv",
.id = 0,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(kirkwood_sata_resources),
.resource = kirkwood_sata_resources,
};
void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
{
kirkwood_clk_ctrl |= CGC_SATA0;
if (sata_data->n_ports > 1)
kirkwood_clk_ctrl |= CGC_SATA1;
sata_data->dram = &kirkwood_mbus_dram_info;
kirkwood_sata.dev.platform_data = sata_data;
platform_device_register(&kirkwood_sata);
}
/*****************************************************************************
* SD/SDIO/MMC
****************************************************************************/
static struct resource mvsdio_resources[] = {
[0] = {
.start = SDIO_PHYS_BASE,
.end = SDIO_PHYS_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_KIRKWOOD_SDIO,
.end = IRQ_KIRKWOOD_SDIO,
.flags = IORESOURCE_IRQ,
},
};
static u64 mvsdio_dmamask = 0xffffffffUL;
static struct platform_device kirkwood_sdio = {
.name = "mvsdio",
.id = -1,
.dev = {
.dma_mask = &mvsdio_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(mvsdio_resources),
.resource = mvsdio_resources,
};
void __init kirkwood_sdio_init(struct mvsdio_platform_data *mvsdio_data)
{
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
if (rev == 0 && dev != MV88F6282_DEV_ID) /* catch all Kirkwood Z0's */
mvsdio_data->clock = 100000000;
else
mvsdio_data->clock = 200000000;
mvsdio_data->dram = &kirkwood_mbus_dram_info;
kirkwood_clk_ctrl |= CGC_SDIO;
kirkwood_sdio.dev.platform_data = mvsdio_data;
platform_device_register(&kirkwood_sdio);
}
/*****************************************************************************
* SPI
****************************************************************************/
static struct orion_spi_info kirkwood_spi_plat_data = {
};
static struct resource kirkwood_spi_resources[] = {
{
.start = SPI_PHYS_BASE,
.end = SPI_PHYS_BASE + SZ_512 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device kirkwood_spi = {
.name = "orion_spi",
.id = 0,
.resource = kirkwood_spi_resources,
.dev = {
.platform_data = &kirkwood_spi_plat_data,
},
.num_resources = ARRAY_SIZE(kirkwood_spi_resources),
};
void __init kirkwood_spi_init()
{
kirkwood_clk_ctrl |= CGC_RUNIT;
platform_device_register(&kirkwood_spi);
}
/*****************************************************************************
* I2C
****************************************************************************/
static struct mv64xxx_i2c_pdata kirkwood_i2c_pdata = {
.freq_m = 8, /* assumes 166 MHz TCLK */
.freq_n = 3,
.timeout = 1000, /* Default timeout of 1 second */
};
static struct resource kirkwood_i2c_resources[] = {
{
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_KIRKWOOD_TWSI,
.end = IRQ_KIRKWOOD_TWSI,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_i2c = {
.name = MV64XXX_I2C_CTLR_NAME,
.id = 0,
.num_resources = ARRAY_SIZE(kirkwood_i2c_resources),
.resource = kirkwood_i2c_resources,
.dev = {
.platform_data = &kirkwood_i2c_pdata,
},
};
void __init kirkwood_i2c_init(void)
{
platform_device_register(&kirkwood_i2c);
}
/*****************************************************************************
* UART0
****************************************************************************/
static struct plat_serial8250_port kirkwood_uart0_data[] = {
{
.mapbase = UART0_PHYS_BASE,
.membase = (char *)UART0_VIRT_BASE,
.irq = IRQ_KIRKWOOD_UART_0,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource kirkwood_uart0_resources[] = {
{
.start = UART0_PHYS_BASE,
.end = UART0_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_KIRKWOOD_UART_0,
.end = IRQ_KIRKWOOD_UART_0,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_uart0 = {
.name = "serial8250",
.id = 0,
.dev = {
.platform_data = kirkwood_uart0_data,
},
.resource = kirkwood_uart0_resources,
.num_resources = ARRAY_SIZE(kirkwood_uart0_resources),
};
void __init kirkwood_uart0_init(void)
{
platform_device_register(&kirkwood_uart0);
}
/*****************************************************************************
* UART1
****************************************************************************/
static struct plat_serial8250_port kirkwood_uart1_data[] = {
{
.mapbase = UART1_PHYS_BASE,
.membase = (char *)UART1_VIRT_BASE,
.irq = IRQ_KIRKWOOD_UART_1,
.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
.iotype = UPIO_MEM,
.regshift = 2,
.uartclk = 0,
}, {
},
};
static struct resource kirkwood_uart1_resources[] = {
{
.start = UART1_PHYS_BASE,
.end = UART1_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_KIRKWOOD_UART_1,
.end = IRQ_KIRKWOOD_UART_1,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_uart1 = {
.name = "serial8250",
.id = 1,
.dev = {
.platform_data = kirkwood_uart1_data,
},
.resource = kirkwood_uart1_resources,
.num_resources = ARRAY_SIZE(kirkwood_uart1_resources),
};
void __init kirkwood_uart1_init(void)
{
platform_device_register(&kirkwood_uart1);
}
/*****************************************************************************
* Cryptographic Engines and Security Accelerator (CESA)
****************************************************************************/
static struct resource kirkwood_crypto_res[] = {
{
.name = "regs",
.start = CRYPTO_PHYS_BASE,
.end = CRYPTO_PHYS_BASE + 0xffff,
.flags = IORESOURCE_MEM,
}, {
.name = "sram",
.start = KIRKWOOD_SRAM_PHYS_BASE,
.end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
.flags = IORESOURCE_MEM,
}, {
.name = "crypto interrupt",
.start = IRQ_KIRKWOOD_CRYPTO,
.end = IRQ_KIRKWOOD_CRYPTO,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device kirkwood_crypto_device = {
.name = "mv_crypto",
.id = -1,
.num_resources = ARRAY_SIZE(kirkwood_crypto_res),
.resource = kirkwood_crypto_res,
};
void __init kirkwood_crypto_init(void)
{
kirkwood_clk_ctrl |= CGC_CRYPTO;
platform_device_register(&kirkwood_crypto_device);
}
/*****************************************************************************
* XOR
****************************************************************************/
static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = {
.dram = &kirkwood_mbus_dram_info,
};
static u64 kirkwood_xor_dmamask = DMA_BIT_MASK(32);
/*****************************************************************************
* XOR0
****************************************************************************/
static struct resource kirkwood_xor0_shared_resources[] = {
{
.name = "xor 0 low",
.start = XOR0_PHYS_BASE,
.end = XOR0_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.name = "xor 0 high",
.start = XOR0_HIGH_PHYS_BASE,
.end = XOR0_HIGH_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device kirkwood_xor0_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 0,
.dev = {
.platform_data = &kirkwood_xor_shared_data,
},
.num_resources = ARRAY_SIZE(kirkwood_xor0_shared_resources),
.resource = kirkwood_xor0_shared_resources,
};
static struct resource kirkwood_xor00_resources[] = {
[0] = {
.start = IRQ_KIRKWOOD_XOR_00,
.end = IRQ_KIRKWOOD_XOR_00,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data kirkwood_xor00_data = {
.shared = &kirkwood_xor0_shared,
.hw_id = 0,
.pool_size = PAGE_SIZE,
};
static struct platform_device kirkwood_xor00_channel = {
.name = MV_XOR_NAME,
.id = 0,
.num_resources = ARRAY_SIZE(kirkwood_xor00_resources),
.resource = kirkwood_xor00_resources,
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = &kirkwood_xor00_data,
},
};
static struct resource kirkwood_xor01_resources[] = {
[0] = {
.start = IRQ_KIRKWOOD_XOR_01,
.end = IRQ_KIRKWOOD_XOR_01,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data kirkwood_xor01_data = {
.shared = &kirkwood_xor0_shared,
.hw_id = 1,
.pool_size = PAGE_SIZE,
};
static struct platform_device kirkwood_xor01_channel = {
.name = MV_XOR_NAME,
.id = 1,
.num_resources = ARRAY_SIZE(kirkwood_xor01_resources),
.resource = kirkwood_xor01_resources,
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = &kirkwood_xor01_data,
},
};
static void __init kirkwood_xor0_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR0;
platform_device_register(&kirkwood_xor0_shared);
/*
* two engines can't do memset simultaneously, this limitation
* satisfied by removing memset support from one of the engines.
*/
dma_cap_set(DMA_MEMCPY, kirkwood_xor00_data.cap_mask);
dma_cap_set(DMA_XOR, kirkwood_xor00_data.cap_mask);
platform_device_register(&kirkwood_xor00_channel);
dma_cap_set(DMA_MEMCPY, kirkwood_xor01_data.cap_mask);
dma_cap_set(DMA_MEMSET, kirkwood_xor01_data.cap_mask);
dma_cap_set(DMA_XOR, kirkwood_xor01_data.cap_mask);
platform_device_register(&kirkwood_xor01_channel);
}
/*****************************************************************************
* XOR1
****************************************************************************/
static struct resource kirkwood_xor1_shared_resources[] = {
{
.name = "xor 1 low",
.start = XOR1_PHYS_BASE,
.end = XOR1_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
}, {
.name = "xor 1 high",
.start = XOR1_HIGH_PHYS_BASE,
.end = XOR1_HIGH_PHYS_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device kirkwood_xor1_shared = {
.name = MV_XOR_SHARED_NAME,
.id = 1,
.dev = {
.platform_data = &kirkwood_xor_shared_data,
},
.num_resources = ARRAY_SIZE(kirkwood_xor1_shared_resources),
.resource = kirkwood_xor1_shared_resources,
};
static struct resource kirkwood_xor10_resources[] = {
[0] = {
.start = IRQ_KIRKWOOD_XOR_10,
.end = IRQ_KIRKWOOD_XOR_10,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data kirkwood_xor10_data = {
.shared = &kirkwood_xor1_shared,
.hw_id = 0,
.pool_size = PAGE_SIZE,
};
static struct platform_device kirkwood_xor10_channel = {
.name = MV_XOR_NAME,
.id = 2,
.num_resources = ARRAY_SIZE(kirkwood_xor10_resources),
.resource = kirkwood_xor10_resources,
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = &kirkwood_xor10_data,
},
};
static struct resource kirkwood_xor11_resources[] = {
[0] = {
.start = IRQ_KIRKWOOD_XOR_11,
.end = IRQ_KIRKWOOD_XOR_11,
.flags = IORESOURCE_IRQ,
},
};
static struct mv_xor_platform_data kirkwood_xor11_data = {
.shared = &kirkwood_xor1_shared,
.hw_id = 1,
.pool_size = PAGE_SIZE,
};
static struct platform_device kirkwood_xor11_channel = {
.name = MV_XOR_NAME,
.id = 3,
.num_resources = ARRAY_SIZE(kirkwood_xor11_resources),
.resource = kirkwood_xor11_resources,
.dev = {
.dma_mask = &kirkwood_xor_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(64),
.platform_data = &kirkwood_xor11_data,
},
};
static void __init kirkwood_xor1_init(void)
{
kirkwood_clk_ctrl |= CGC_XOR1;
platform_device_register(&kirkwood_xor1_shared);
/*
* two engines can't do memset simultaneously, this limitation
* satisfied by removing memset support from one of the engines.
*/
dma_cap_set(DMA_MEMCPY, kirkwood_xor10_data.cap_mask);
dma_cap_set(DMA_XOR, kirkwood_xor10_data.cap_mask);
platform_device_register(&kirkwood_xor10_channel);
dma_cap_set(DMA_MEMCPY, kirkwood_xor11_data.cap_mask);
dma_cap_set(DMA_MEMSET, kirkwood_xor11_data.cap_mask);
dma_cap_set(DMA_XOR, kirkwood_xor11_data.cap_mask);
platform_device_register(&kirkwood_xor11_channel);
}
/*****************************************************************************
* Watchdog
****************************************************************************/
static struct orion_wdt_platform_data kirkwood_wdt_data = {
.tclk = 0,
};
static struct platform_device kirkwood_wdt_device = {
.name = "orion_wdt",
.id = -1,
.dev = {
.platform_data = &kirkwood_wdt_data,
},
.num_resources = 0,
};
static void __init kirkwood_wdt_init(void)
{
kirkwood_wdt_data.tclk = kirkwood_tclk;
platform_device_register(&kirkwood_wdt_device);
}
/*****************************************************************************
* Time handling
****************************************************************************/
int kirkwood_tclk;
int __init kirkwood_find_tclk(void)
{
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
if ((dev == MV88F6281_DEV_ID && (rev == MV88F6281_REV_A0 ||
rev == MV88F6281_REV_A1)) ||
(dev == MV88F6282_DEV_ID))
return 200000000;
return 166666667;
}
static void __init kirkwood_timer_init(void)
{
kirkwood_tclk = kirkwood_find_tclk();
orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
}
struct sys_timer kirkwood_timer = {
.init = kirkwood_timer_init,
};
/*****************************************************************************
* Audio
****************************************************************************/
static struct resource kirkwood_i2s_resources[] = {
[0] = {
.start = AUDIO_PHYS_BASE,
.end = AUDIO_PHYS_BASE + SZ_16K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_KIRKWOOD_I2S,
.end = IRQ_KIRKWOOD_I2S,
.flags = IORESOURCE_IRQ,
},
};
static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
.dram = &kirkwood_mbus_dram_info,
.burst = 128,
};
static struct platform_device kirkwood_i2s_device = {
.name = "kirkwood-i2s",
.id = -1,
.num_resources = ARRAY_SIZE(kirkwood_i2s_resources),
.resource = kirkwood_i2s_resources,
.dev = {
.platform_data = &kirkwood_i2s_data,
},
};
void __init kirkwood_audio_init(void)
{
kirkwood_clk_ctrl |= CGC_AUDIO;
platform_device_register(&kirkwood_i2s_device);
}
/*****************************************************************************
* General
****************************************************************************/
/*
* Identify device ID and revision.
*/
static char * __init kirkwood_id(void)
{
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
if (dev == MV88F6281_DEV_ID) {
if (rev == MV88F6281_REV_Z0)
return "MV88F6281-Z0";
else if (rev == MV88F6281_REV_A0)
return "MV88F6281-A0";
else if (rev == MV88F6281_REV_A1)
return "MV88F6281-A1";
else
return "MV88F6281-Rev-Unsupported";
} else if (dev == MV88F6192_DEV_ID) {
if (rev == MV88F6192_REV_Z0)
return "MV88F6192-Z0";
else if (rev == MV88F6192_REV_A0)
return "MV88F6192-A0";
else if (rev == MV88F6192_REV_A1)
return "MV88F6192-A1";
else
return "MV88F6192-Rev-Unsupported";
} else if (dev == MV88F6180_DEV_ID) {
if (rev == MV88F6180_REV_A0)
return "MV88F6180-Rev-A0";
else if (rev == MV88F6180_REV_A1)
return "MV88F6180-Rev-A1";
else
return "MV88F6180-Rev-Unsupported";
} else if (dev == MV88F6282_DEV_ID) {
if (rev == MV88F6282_REV_A0)
return "MV88F6282-Rev-A0";
else
return "MV88F6282-Rev-Unsupported";
} else {
return "Device-Unknown";
}
}
static void __init kirkwood_l2_init(void)
{
#ifdef CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH
writel(readl(L2_CONFIG_REG) | L2_WRITETHROUGH, L2_CONFIG_REG);
feroceon_l2_init(1);
#else
writel(readl(L2_CONFIG_REG) & ~L2_WRITETHROUGH, L2_CONFIG_REG);
feroceon_l2_init(0);
#endif
}
void __init kirkwood_init(void)
{
printk(KERN_INFO "Kirkwood: %s, TCLK=%d.\n",
kirkwood_id(), kirkwood_tclk);
kirkwood_ge00_shared_data.t_clk = kirkwood_tclk;
kirkwood_ge01_shared_data.t_clk = kirkwood_tclk;
kirkwood_spi_plat_data.tclk = kirkwood_tclk;
kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
kirkwood_i2s_data.tclk = kirkwood_tclk;
/*
* Disable propagation of mbus errors to the CPU local bus,
* as this causes mbus errors (which can occur for example
* for PCI aborts) to throw CPU aborts, which we're not set
* up to deal with.
*/
writel(readl(CPU_CONFIG) & ~CPU_CONFIG_ERROR_PROP, CPU_CONFIG);
kirkwood_setup_cpu_mbus();
#ifdef CONFIG_CACHE_FEROCEON_L2
kirkwood_l2_init();
#endif
/* internal devices that every board has */
kirkwood_rtc_init();
kirkwood_wdt_init();
kirkwood_xor0_init();
kirkwood_xor1_init();
kirkwood_crypto_init();
}
static int __init kirkwood_clock_gate(void)
{
unsigned int curr = readl(CLOCK_GATING_CTRL);
u32 dev, rev;
kirkwood_pcie_id(&dev, &rev);
printk(KERN_DEBUG "Gating clock of unused units\n");
printk(KERN_DEBUG "before: 0x%08x\n", curr);
/* Make sure those units are accessible */
writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0 | CGC_PEX1, CLOCK_GATING_CTRL);
/* For SATA: first shutdown the phy */
if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
/* Disable PLL and IVREF */
writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
/* Disable PHY */
writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
}
if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
/* Disable PLL and IVREF */
writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
/* Disable PHY */
writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
}
/* For PCIe: first shutdown the phy */
if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
while (1)
if (readl(PCIE_STATUS) & 0x1)
break;
writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
}
/* For PCIe 1: first shutdown the phy */
if (dev == MV88F6282_DEV_ID) {
if (!(kirkwood_clk_ctrl & CGC_PEX1)) {
writel(readl(PCIE1_LINK_CTRL) | 0x10, PCIE1_LINK_CTRL);
while (1)
if (readl(PCIE1_STATUS) & 0x1)
break;
writel(readl(PCIE1_LINK_CTRL) & ~0x10, PCIE1_LINK_CTRL);
}
} else /* keep this bit set for devices that don't have PCIe1 */
kirkwood_clk_ctrl |= CGC_PEX1;
/* Now gate clock the required units */
writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
return 0;
}
late_initcall(kirkwood_clock_gate);