kernel-fxtec-pro1x/arch/arm/mach-footbridge/isa-timer.c

92 lines
2.1 KiB
C
Raw Normal View History

/*
* linux/arch/arm/mach-footbridge/isa-timer.c
*
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
#include "common.h"
/*
* ISA timer tick support
*/
#define mSEC_10_from_14 ((14318180 + 100) / 200)
static unsigned long isa_gettimeoffset(void)
{
int count;
static int count_p = (mSEC_10_from_14/6); /* for the first call after boot */
static unsigned long jiffies_p = 0;
/*
* cache volatile jiffies temporarily; we have IRQs turned off.
*/
unsigned long jiffies_t;
/* timer count may underflow right here */
outb_p(0x00, 0x43); /* latch the count ASAP */
count = inb_p(0x40); /* read the latched count */
/*
* We do this guaranteed double memory access instead of a _p
* postfix in the previous port access. Wheee, hackady hack
*/
jiffies_t = jiffies;
count |= inb_p(0x40) << 8;
/* Detect timer underflows. If we haven't had a timer tick since
the last time we were called, and time is apparently going
backwards, the counter must have wrapped during this routine. */
if ((jiffies_t == jiffies_p) && (count > count_p))
count -= (mSEC_10_from_14/6);
else
jiffies_p = jiffies_t;
count_p = count;
count = (((mSEC_10_from_14/6)-1) - count) * (tick_nsec / 1000);
count = (count + (mSEC_10_from_14/6)/2) / (mSEC_10_from_14/6);
return count;
}
static irqreturn_t
isa_timer_interrupt(int irq, void *dev_id)
{
timer_tick();
return IRQ_HANDLED;
}
static struct irqaction isa_timer_irq = {
.name = "ISA timer tick",
.handler = isa_timer_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
};
static void __init isa_timer_init(void)
{
/* enable PIT timer */
/* set for periodic (4) and LSB/MSB write (0x30) */
outb(0x34, 0x43);
outb((mSEC_10_from_14/6) & 0xFF, 0x40);
outb((mSEC_10_from_14/6) >> 8, 0x40);
setup_irq(IRQ_ISA_TIMER, &isa_timer_irq);
}
struct sys_timer isa_timer = {
.init = isa_timer_init,
.offset = isa_gettimeoffset,
};