Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/ata/libata-core.c

6885 lines
175 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
[libata] license change, other bits - changes license of all code from OSL+GPL to plain ole GPL - except for NVIDIA, who hasn't yet responded about sata_nv - copyright holders were already contacted privately - adds info in each driver about where hardware/protocol docs may be obtained - where I have made major contributions, updated copyright dates
2005-08-28 18:18:39 -06:00
* libata-core.c - helper library for ATA
*
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
* Please ALWAYS copy linux-ide@vger.kernel.org
* on emails.
*
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
* Copyright 2003-2004 Jeff Garzik
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
* Hardware documentation available from http://www.t13.org/ and
* http://www.sata-io.org/
*
libata-core: List more documentation sources for reference And next time I'll be able to find the ata tape spec easily... Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-19 07:30:16 -07:00
* Standards documents from:
* http://www.t13.org (ATA standards, PCI DMA IDE spec)
* http://www.t10.org (SCSI MMC - for ATAPI MMC)
* http://www.sata-io.org (SATA)
* http://www.compactflash.org (CF)
* http://www.qic.org (QIC157 - Tape and DSC)
* http://www.ce-ata.org (CE-ATA: not supported)
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/completion.h>
#include <linux/suspend.h>
#include <linux/workqueue.h>
[PATCH] Use sg_set_buf/sg_init_one where applicable This patch uses sg_set_buf/sg_init_one in some places where it was duplicated. Signed-off-by: David Hardeman <david@2gen.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Greg KH <greg@kroah.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-09-17 01:55:31 -06:00
#include <linux/scatterlist.h>
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
#include <linux/io.h>
fastboot: make the libata port scan asynchronous This patch makes the libata port scanning asynchronous (per device). There is a synchronization point before doing the actual disk scan so that device ordering is not affected. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-04 06:32:28 -07:00
#include <linux/async.h>
[libata] More robust parsing for IDENTIFY DEVICE multi_count field Make libata more robust when parsing the multi_count field from a drive's identify data. This prevents us from attempting to use dubious multi_count values ad infinitum. Reset dev->multi_count to zero and reprobe it each time through this routine, as it can change on device reset. Also ensure that the reported "maximum" value is valid and is a power of two, and that the reported "count" value is valid and also a power of two. And that the "count" value is not greater than the "maximum" value. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-19 11:32:21 -06:00
#include <linux/log2.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include <scsi/scsi.h>
[libata] eliminate use of drivers/scsi/scsi.h compatibility header/defines
2005-11-06 22:59:37 -07:00
#include <scsi/scsi_cmnd.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#include <asm/byteorder.h>
libata: fix ATAPI draining With ATAPI transfer chunk size properly programmed, libata PIO HSM should be able to handle full spurious data chunks. Also, it's a good idea to suppress trailing data warning for misc ATAPI commands as there can be many of them per command - for example, if the chunk size is 16 and the drive tries to transfer 510 bytes, there can be 31 trailing data messages. This patch makes the following updates to libata ATAPI PIO HSM implementation. * Make it drain full spurious chunks. * Suppress trailing data warning message for misc commands. * Put limit on how many bytes can be drained. * If odd, round up consumed bytes and the number of bytes to be drained. This gets the number of bytes to drain right for drivers which do 16bit PIO. This patch is partial backport of improve-ATAPI-data-xfer patchset pending for #upstream. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-11 20:21:52 -07:00
#include <linux/cdrom.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include "libata.h"
[libata] Shuffle DRV_xxx in core and SiS drivers, to kill warnings Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-31 05:43:15 -07:00
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
/* debounce timing parameters in msecs { interval, duration, timeout } */
[PATCH] libata: clean up debounce parameters and improve parameter selection The names of predefined debounce timing parameters didn't exactly match their usages. Rename to more generic names and implement param selection helper sata_ehc_deb_timing() which uses EHI_HOTPLUGGED to select params. Combined with the previous EHI_RESUME_LINK differentiation, this makes parameter selection accurate. e.g. user scan resumes link but normal deb param is used instead of hotplug param. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:26 -06:00
const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 };
const unsigned long sata_deb_timing_hotplug[] = { 25, 500, 2000 };
const unsigned long sata_deb_timing_long[] = { 100, 2000, 5000 };
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
const struct ata_port_operations ata_base_port_ops = {
libata: separate out ata_std_prereset() from ata_sff_prereset() Separate out generic ATA portion from ata_sff_prereset() into ata_std_prereset() and implement ata_sff_prereset() using the std version. Waiting for device readiness is the only SFF specific part. ata_base_port_ops now has ata_std_prereset() for its prereset and ata_sff_port_ops overrides it to ata_sff_prereset(). This change can affect pdc_adma, ahci, sata_fsl and sata_sil24. pdc_adma implements its own prereset using ata_sff_prereset() and the rest has hardreset and thus are unaffected by this change. This change reflects real world situation. There is no generic way to wait for device readiness for non-SFF controllers and some of them don't have any mechanism for that. Non-sff drivers which don't have hardreset should wrap ata_std_prereset() and wait for device readiness itself but there's no such driver now and isn't likely to be popular in the future either. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:18 -06:00
.prereset = ata_std_prereset,
libata: separate out ata_std_postreset() from ata_sff_postreset() Separate out generic ATA portion from ata_sff_postreset() into ata_std_postreset() and implement ata_sff_postreset() using the std version. ata_base_port_ops now has ata_std_postreset() for its postreset and ata_sff_port_ops overrides it to ata_sff_postreset(). This change affects pdc_adma, ahci, sata_fsl and sata_sil24. pdc_adma now specifies postreset to ata_sff_postreset() explicitly. sata_fsl and sata_sil24 now use ata_std_postreset() which makes no difference to them. ahci now calls ata_std_postreset() from its own postreset method, which causes no behavior difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:18 -06:00
.postreset = ata_std_postreset,
libata: make reset related methods proper port operations Currently reset methods are not specified directly in the ata_port_operations table. If a LLD wants to use custom reset methods, it should construct and use a error_handler which uses those reset methods. It's done this way for two reasons. First, the ops table already contained too many methods and adding four more of them would noticeably increase the amount of necessary boilerplate code all over low level drivers. Second, as ->error_handler uses those reset methods, it can get confusing. ie. By overriding ->error_handler, those reset ops can be made useless making layering a bit hazy. Now that ops table uses inheritance, the first problem doesn't exist anymore. The second isn't completely solved but is relieved by providing default values - most drivers can just override what it has implemented and don't have to concern itself about higher level callbacks. In fact, there currently is no driver which actually modifies error handling behavior. Drivers which override ->error_handler just wraps the standard error handler only to prepare the controller for EH. I don't think making ops layering strict has any noticeable benefit. This patch makes ->prereset, ->softreset, ->hardreset, ->postreset and their PMP counterparts propoer ops. Default ops are provided in the base ops tables and drivers are converted to override individual reset methods instead of creating custom error_handler. * ata_std_error_handler() doesn't use sata_std_hardreset() if SCRs aren't accessible. sata_promise doesn't need to use separate error_handlers for PATA and SATA anymore. * softreset is broken for sata_inic162x and sata_sx4. As libata now always prefers hardreset, this doesn't really matter but the ops are forced to NULL using ATA_OP_NULL for documentation purpose. * pata_hpt374 needs to use different prereset for the first and second PCI functions. This used to be done by branching from hpt374_error_handler(). The proper way to do this is to use separate ops and port_info tables for each function. Converted. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:50 -06:00
.error_handler = ata_std_error_handler,
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
};
const struct ata_port_operations sata_port_ops = {
.inherits = &ata_base_port_ops,
.qc_defer = ata_std_qc_defer,
libata: implement and use sata_std_hardreset() Implement sata_std_hardreset(), which simply wraps around sata_link_hardreset(). sata_std_hardreset() becomes new standard hardreset method for sata_port_ops and sata_sff_hardreset() moves from ata_base_port_ops to ata_sff_port_ops, which is where it really belongs. ata_is_builtin_hardreset() is added so that both ata_std_error_handler() and ata_sff_error_handler() skip both builtin hardresets if SCR isn't accessible. piix_sidpr_hardreset() in ata_piix.c is identical to sata_std_hardreset() in functionality and got replaced with the standard function. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
.hardreset = sata_std_hardreset,
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
};
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
[libata] Create internal helper ata_dev_set_feature() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:33:27 -06:00
static unsigned int ata_dev_set_feature(struct ata_device *dev,
u8 enable, u8 feature);
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
static void ata_dev_xfermask(struct ata_device *dev);
libata: clean up horkage handling Horkage handling had the following problems. * dev->horkage was positioned after ATA_DEVICE_CLEAR_OFFSET, so it was cleared before the device is configured. This broke HORKAGE_DIAGNOSTIC. * Some used dev->horkage while others called ata_device_blacklisted() directly. This was at best confusing. This patch moves dev->horkage right after dev->flags and set the field according to the blacklist during device configuration. All users test against dev->horkage. ata_device_blacklisted() now has only one user, make it static. While at it, rename it to ata_dev_blacklisted() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-04 22:31:27 -06:00
static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
unsigned int ata_print_id = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
static struct workqueue_struct *ata_wq;
[PATCH] libata-hp-prep: add ata_aux_wq It's best to run ATA hotplug from EH but attaching SCSI devices needs working EH. ata_aux_wq is used to give SCSI hotplug operations a separate context. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:42 -06:00
struct workqueue_struct *ata_aux_wq;
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
struct ata_force_param {
const char *name;
unsigned int cbl;
int spd_limit;
unsigned long xfer_mask;
unsigned int horkage_on;
unsigned int horkage_off;
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
unsigned int lflags;
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
};
struct ata_force_ent {
int port;
int device;
struct ata_force_param param;
};
static struct ata_force_ent *ata_force_tbl;
static int ata_force_tbl_size;
static char ata_force_param_buf[PAGE_SIZE] __initdata;
libata: don't allow sysfs read access to force param Buffer for force param is deallocated after initialization, so trying to read it via sysfs results in oops. Don't allow read access to the param node. Spotted by Eric Sesterhenn. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-09 05:21:53 -06:00
/* param_buf is thrown away after initialization, disallow read */
module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
libata: update atapi disable handling Global and per-LLD ATAPI disable checks were done in the command issue path probably because it was left out during EH conversion. On affected machines, this can cause lots of warning messages. Move them to where they belong - the probing path. Reported by Chunbo Luo. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Chunbo Luo <chunbo.luo@windriver.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 16:52:40 -06:00
static int atapi_enabled = 1;
[libata] allow ATAPI to be enabled with new atapi_enabled module option ATAPI is getting close to being ready. To increase exposure, we enable the code in the upstream kernel, but default it to off (present behavior). Users must pass atapi_enabled=1 as a module option (if module) or on the kernel command line (if built in) to turn on discovery of their ATAPI devices.
2005-08-30 01:37:42 -06:00
module_param(atapi_enabled, int, 0444);
[libata] beautify module parameters 1. add defaults to description where possible 2. add value definition (off=0, on=1) where missing v2: reformatted as per request by Jeff Garzik <jgarzik@pobox.com> "Enable foo (0=off, 1=on [default])" Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-22 01:46:20 -06:00
MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
[libata] allow ATAPI to be enabled with new atapi_enabled module option ATAPI is getting close to being ready. To increase exposure, we enable the code in the upstream kernel, but default it to off (present behavior). Users must pass atapi_enabled=1 as a module option (if module) or on the kernel command line (if built in) to turn on discovery of their ATAPI devices.
2005-08-30 01:37:42 -06:00
make atapi_dmadir static atapi_dmadir can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-24 17:07:25 -07:00
static int atapi_dmadir = 0;
[PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameter Convert the ATAPI_ENABLE_DMADIR compile time option needed by some SATA-PATA bridge to runtime module parameter. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-03 20:57:18 -06:00
module_param(atapi_dmadir, int, 0444);
[libata] beautify module parameters 1. add defaults to description where possible 2. add value definition (off=0, on=1) where missing v2: reformatted as per request by Jeff Garzik <jgarzik@pobox.com> "Enable foo (0=off, 1=on [default])" Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-22 01:46:20 -06:00
MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
[PATCH] libata: convert ATAPI_ENABLE_DMADIR to module parameter Convert the ATAPI_ENABLE_DMADIR compile time option needed by some SATA-PATA bridge to runtime module parameter. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-03 20:57:18 -06:00
libata: add support for ATA_16 on ATAPI Add support for issuing ATA_16 passthru commands to ATAPI devices managed by libata. It requires the previous CDB length fix patch. A boot/module parameter, "atapi_passthru16=0" can be used to globally disable this feature, if ever desired. tj: restructured __ata_scsi_queuecmd() according to Jeff's suggestion. Signed-off-by: Mark Lord <liml@rtr.ca> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07 10:08:45 -06:00
int atapi_passthru16 = 1;
module_param(atapi_passthru16, int, 0444);
[libata] beautify module parameters 1. add defaults to description where possible 2. add value definition (off=0, on=1) where missing v2: reformatted as per request by Jeff Garzik <jgarzik@pobox.com> "Enable foo (0=off, 1=on [default])" Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-22 01:46:20 -06:00
MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
libata: add support for ATA_16 on ATAPI Add support for issuing ATA_16 passthru commands to ATAPI devices managed by libata. It requires the previous CDB length fix patch. A boot/module parameter, "atapi_passthru16=0" can be used to globally disable this feature, if ever desired. tj: restructured __ata_scsi_queuecmd() according to Jeff's suggestion. Signed-off-by: Mark Lord <liml@rtr.ca> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-07 10:08:45 -06:00
[libata] Disable FUA Until problems are sorted.
2006-02-27 20:31:19 -07:00
int libata_fua = 0;
module_param_named(fua, libata_fua, int, 0444);
[libata] beautify module parameters 1. add defaults to description where possible 2. add value definition (off=0, on=1) where missing v2: reformatted as per request by Jeff Garzik <jgarzik@pobox.com> "Enable foo (0=off, 1=on [default])" Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-22 01:46:20 -06:00
MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
[libata] Disable FUA Until problems are sorted.
2006-02-27 20:31:19 -07:00
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
static int ata_ignore_hpa;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
MODULE_PARM_DESC(ignore_hpa, "Ignore HPA limit (0=keep BIOS limits, 1=ignore limits, using full disk)");
libata: Add a drivers/ide style DMA disable This is useful when debugging, handling problem systems, or for distributions just to get the system installed so it can be sorted out later. This is a bit smarter than the old IDE one and lets you do libata.dma=0 Disable all PATA DMA like old IDE libata.dma=1 Disk DMA only libata.dma=2 ATAPI DMA only libata.dma=4 CF DMA only (or combinations thereof - 0,1,3 being the useful ones I suspect) (I've split CF as it seems to be a seperate case of pain and suffering different to the others and caused by assorted PIO wired adapters etc) Signed-off-by: Alan Cox <alan@redhat.com> [edited to work on SATA too, changing name from 'pata_dma' to 'dma'] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-02 10:38:26 -06:00
static int libata_dma_mask = ATA_DMA_MASK_ATA|ATA_DMA_MASK_ATAPI|ATA_DMA_MASK_CFA;
module_param_named(dma, libata_dma_mask, int, 0444);
MODULE_PARM_DESC(dma, "DMA enable/disable (0x1==ATA, 0x2==ATAPI, 0x4==CF)");
libata: improve EH internal command timeout handling ATA_TMOUT_INTERNAL which was 30secs were used for all internal commands which is way too long when something goes wrong. This patch implements command type based stepped timeouts. Different command types can use different timeouts and each command type can use different timeout values after timeouts. ie. the initial timeout is set to a value which should cover most of the cases but not too long so that run away cases don't delay things too much. After the first try times out, the second try can use longer timeout and if that one times out too, it can go for full 30sec timeout. IDENTIFYs use 5s - 10s - 30s timeout and all other commands use 5s - 10s timeouts. This patch significantly cuts down the needed time to handle failure cases while still allowing libata to work with nut job devices through retries. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:54 -06:00
static int ata_probe_timeout;
[PATCH] libata reduce timeouts From: Andrew Morton <akpm@osdl.org> Provide a module parameter to override the default 30-second-per-device SATA probing timeout. Cc: Tejun Heo <htejun@gmail.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 02:36:52 -06:00
module_param(ata_probe_timeout, int, 0444);
MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
[libata] Turn on ACPI by default Let's see what explodes. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-05 14:28:36 -06:00
int libata_noacpi = 0;
[libata] Disable ACPI by default; fix namespace problems Not yet ready to turn on ATA ACPI by default, for either PATA or SATA. Also, rename the global-scope module parameter variable 'noacpi' to something more libata-specific, reducing the potential for namespace collision. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27 23:57:37 -06:00
module_param_named(noacpi, libata_noacpi, int, 0444);
[libata] beautify module parameters 1. add defaults to description where possible 2. add value definition (off=0, on=1) where missing v2: reformatted as per request by Jeff Garzik <jgarzik@pobox.com> "Enable foo (0=off, 1=on [default])" Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-22 01:46:20 -06:00
MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
[PATCH] libata: ACPI and _GTF support _GTF is an acpi method that is used to reinitialize the drive. It returns a task file containing ata commands that are sent back to the drive to restore it to boot up defaults. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 9c69cab24b51a89664f4c0dfaf8a436d32117624 commit)
2006-09-28 12:29:01 -06:00
libata: Disable ATA8-ACS proposed Trusted Computing features by default Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox <alan@redhat.com>
2007-11-04 20:05:49 -07:00
int libata_allow_tpm = 0;
module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
[libata] beautify module parameters 1. add defaults to description where possible 2. add value definition (off=0, on=1) where missing v2: reformatted as per request by Jeff Garzik <jgarzik@pobox.com> "Enable foo (0=off, 1=on [default])" Signed-off-by: Evgeni Golov <sargentd@die-welt.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-22 01:46:20 -06:00
MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
libata: Disable ATA8-ACS proposed Trusted Computing features by default Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox <alan@redhat.com>
2007-11-04 20:05:49 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
MODULE_AUTHOR("Jeff Garzik");
MODULE_DESCRIPTION("Library module for ATA devices");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
libata: update inline source docs
2005-06-02 16:17:13 -06:00
libata: check onlineness before using SPD in sata_down_spd_limit() sata_down_spd_limit() should check whether the link is online before using the SPD value to determine how to limit the link speed. Factor out onlineness test and test it from sata_down_spd_limit(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:31 -07:00
static bool ata_sstatus_online(u32 sstatus)
{
return (sstatus & 0xf) == 0x3;
}
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
/**
* ata_link_next - link iteration helper
* @link: the previous link, NULL to start
* @ap: ATA port containing links to iterate
* @mode: iteration mode, one of ATA_LITER_*
*
* LOCKING:
* Host lock or EH context.
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
*
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
* RETURNS:
* Pointer to the next link.
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
*/
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
struct ata_link *ata_link_next(struct ata_link *link, struct ata_port *ap,
enum ata_link_iter_mode mode)
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
{
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
BUG_ON(mode != ATA_LITER_EDGE &&
mode != ATA_LITER_PMP_FIRST && mode != ATA_LITER_HOST_FIRST);
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
/* NULL link indicates start of iteration */
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
if (!link)
switch (mode) {
case ATA_LITER_EDGE:
case ATA_LITER_PMP_FIRST:
if (sata_pmp_attached(ap))
return ap->pmp_link;
/* fall through */
case ATA_LITER_HOST_FIRST:
return &ap->link;
}
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
/* we just iterated over the host link, what's next? */
if (link == &ap->link)
switch (mode) {
case ATA_LITER_HOST_FIRST:
if (sata_pmp_attached(ap))
return ap->pmp_link;
/* fall through */
case ATA_LITER_PMP_FIRST:
if (unlikely(ap->slave_link))
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
return ap->slave_link;
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
/* fall through */
case ATA_LITER_EDGE:
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
return NULL;
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
}
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
/* slave_link excludes PMP */
if (unlikely(link == ap->slave_link))
return NULL;
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
/* we were over a PMP link */
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
if (++link < ap->pmp_link + ap->nr_pmp_links)
return link;
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
if (mode == ATA_LITER_PMP_FIRST)
return &ap->link;
libata: reimplement link iterator Implement __ata_port_next_link() and reimplement __ata_port_for_each_link() and ata_port_for_each_link() using it. This removes relatively large inlined code and makes iteration easier to extend. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:41 -06:00
return NULL;
}
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
/**
* ata_dev_next - device iteration helper
* @dev: the previous device, NULL to start
* @link: ATA link containing devices to iterate
* @mode: iteration mode, one of ATA_DITER_*
*
* LOCKING:
* Host lock or EH context.
*
* RETURNS:
* Pointer to the next device.
*/
struct ata_device *ata_dev_next(struct ata_device *dev, struct ata_link *link,
enum ata_dev_iter_mode mode)
{
BUG_ON(mode != ATA_DITER_ENABLED && mode != ATA_DITER_ENABLED_REVERSE &&
mode != ATA_DITER_ALL && mode != ATA_DITER_ALL_REVERSE);
/* NULL dev indicates start of iteration */
if (!dev)
switch (mode) {
case ATA_DITER_ENABLED:
case ATA_DITER_ALL:
dev = link->device;
goto check;
case ATA_DITER_ENABLED_REVERSE:
case ATA_DITER_ALL_REVERSE:
dev = link->device + ata_link_max_devices(link) - 1;
goto check;
}
next:
/* move to the next one */
switch (mode) {
case ATA_DITER_ENABLED:
case ATA_DITER_ALL:
if (++dev < link->device + ata_link_max_devices(link))
goto check;
return NULL;
case ATA_DITER_ENABLED_REVERSE:
case ATA_DITER_ALL_REVERSE:
if (--dev >= link->device)
goto check;
return NULL;
}
check:
if ((mode == ATA_DITER_ENABLED || mode == ATA_DITER_ENABLED_REVERSE) &&
!ata_dev_enabled(dev))
goto next;
return dev;
}
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
/**
* ata_dev_phys_link - find physical link for a device
* @dev: ATA device to look up physical link for
*
* Look up physical link which @dev is attached to. Note that
* this is different from @dev->link only when @dev is on slave
* link. For all other cases, it's the same as @dev->link.
*
* LOCKING:
* Don't care.
*
* RETURNS:
* Pointer to the found physical link.
*/
struct ata_link *ata_dev_phys_link(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
if (!ap->slave_link)
return dev->link;
if (!dev->devno)
return &ap->link;
return ap->slave_link;
}
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
/**
* ata_force_cbl - force cable type according to libata.force
libata-core: fix kernel-doc warning Fix libata-core kernel-doc warning: Warning(linux-2.6.25-rc2-git6//drivers/ata/libata-core.c:168): No description found for parameter 'ap' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-22 13:21:37 -07:00
* @ap: ATA port of interest
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
*
* Force cable type according to libata.force and whine about it.
* The last entry which has matching port number is used, so it
* can be specified as part of device force parameters. For
* example, both "a:40c,1.00:udma4" and "1.00:40c,udma4" have the
* same effect.
*
* LOCKING:
* EH context.
*/
void ata_force_cbl(struct ata_port *ap)
{
int i;
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
if (fe->port != -1 && fe->port != ap->print_id)
continue;
if (fe->param.cbl == ATA_CBL_NONE)
continue;
ap->cbl = fe->param.cbl;
ata_port_printk(ap, KERN_NOTICE,
"FORCE: cable set to %s\n", fe->param.name);
return;
}
}
/**
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
* ata_force_link_limits - force link limits according to libata.force
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
* @link: ATA link of interest
*
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
* Force link flags and SATA spd limit according to libata.force
* and whine about it. When only the port part is specified
* (e.g. 1:), the limit applies to all links connected to both
* the host link and all fan-out ports connected via PMP. If the
* device part is specified as 0 (e.g. 1.00:), it specifies the
* first fan-out link not the host link. Device number 15 always
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
* points to the host link whether PMP is attached or not. If the
* controller has slave link, device number 16 points to it.
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
*
* LOCKING:
* EH context.
*/
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
static void ata_force_link_limits(struct ata_link *link)
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
{
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
bool did_spd = false;
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
int linkno = link->pmp;
int i;
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
if (ata_is_host_link(link))
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
linkno += 15;
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
if (fe->port != -1 && fe->port != link->ap->print_id)
continue;
if (fe->device != -1 && fe->device != linkno)
continue;
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
/* only honor the first spd limit */
if (!did_spd && fe->param.spd_limit) {
link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
ata_link_printk(link, KERN_NOTICE,
"FORCE: PHY spd limit set to %s\n",
fe->param.name);
did_spd = true;
}
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
/* let lflags stack */
if (fe->param.lflags) {
link->flags |= fe->param.lflags;
ata_link_printk(link, KERN_NOTICE,
"FORCE: link flag 0x%x forced -> 0x%x\n",
fe->param.lflags, link->flags);
}
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
}
}
/**
* ata_force_xfermask - force xfermask according to libata.force
* @dev: ATA device of interest
*
* Force xfer_mask according to libata.force and whine about it.
* For consistency with link selection, device number 15 selects
* the first device connected to the host link.
*
* LOCKING:
* EH context.
*/
static void ata_force_xfermask(struct ata_device *dev)
{
int devno = dev->link->pmp + dev->devno;
int alt_devno = devno;
int i;
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
/* allow n.15/16 for devices attached to host port */
if (ata_is_host_link(dev->link))
alt_devno += 15;
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
for (i = ata_force_tbl_size - 1; i >= 0; i--) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
unsigned long pio_mask, mwdma_mask, udma_mask;
if (fe->port != -1 && fe->port != dev->link->ap->print_id)
continue;
if (fe->device != -1 && fe->device != devno &&
fe->device != alt_devno)
continue;
if (!fe->param.xfer_mask)
continue;
ata_unpack_xfermask(fe->param.xfer_mask,
&pio_mask, &mwdma_mask, &udma_mask);
if (udma_mask)
dev->udma_mask = udma_mask;
else if (mwdma_mask) {
dev->udma_mask = 0;
dev->mwdma_mask = mwdma_mask;
} else {
dev->udma_mask = 0;
dev->mwdma_mask = 0;
dev->pio_mask = pio_mask;
}
ata_dev_printk(dev, KERN_NOTICE,
"FORCE: xfer_mask set to %s\n", fe->param.name);
return;
}
}
/**
* ata_force_horkage - force horkage according to libata.force
* @dev: ATA device of interest
*
* Force horkage according to libata.force and whine about it.
* For consistency with link selection, device number 15 selects
* the first device connected to the host link.
*
* LOCKING:
* EH context.
*/
static void ata_force_horkage(struct ata_device *dev)
{
int devno = dev->link->pmp + dev->devno;
int alt_devno = devno;
int i;
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
/* allow n.15/16 for devices attached to host port */
if (ata_is_host_link(dev->link))
alt_devno += 15;
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
for (i = 0; i < ata_force_tbl_size; i++) {
const struct ata_force_ent *fe = &ata_force_tbl[i];
if (fe->port != -1 && fe->port != dev->link->ap->print_id)
continue;
if (fe->device != -1 && fe->device != devno &&
fe->device != alt_devno)
continue;
if (!(~dev->horkage & fe->param.horkage_on) &&
!(dev->horkage & fe->param.horkage_off))
continue;
dev->horkage |= fe->param.horkage_on;
dev->horkage &= ~fe->param.horkage_off;
ata_dev_printk(dev, KERN_NOTICE,
"FORCE: horkage modified (%s)\n", fe->param.name);
}
}
libata: uninline atapi_cmd_type() Uninline atapi_cmd_type(). It doesn't really have to be inline and more case will be added which need to access unexported libata variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-02 02:28:46 -06:00
/**
* atapi_cmd_type - Determine ATAPI command type from SCSI opcode
* @opcode: SCSI opcode
*
* Determine ATAPI command type from @opcode.
*
* LOCKING:
* None.
*
* RETURNS:
* ATAPI_{READ|WRITE|READ_CD|PASS_THRU|MISC}
*/
int atapi_cmd_type(u8 opcode)
{
switch (opcode) {
case GPCMD_READ_10:
case GPCMD_READ_12:
return ATAPI_READ;
case GPCMD_WRITE_10:
case GPCMD_WRITE_12:
case GPCMD_WRITE_AND_VERIFY_10:
return ATAPI_WRITE;
case GPCMD_READ_CD:
case GPCMD_READ_CD_MSF:
return ATAPI_READ_CD;
libata: ATA_12/16 doesn't fall into ATAPI_MISC SAT passthrus don't really fit into ATAPI_MISC class. SAT passthru commands always transfer multiple of 512 bytes and variable length response is not allowed. This patch creates a separate category - ATAPI_PASS_THRU - for these. This fixes HSM violation on "hdparm -I". Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-02 02:35:19 -06:00
case ATA_16:
case ATA_12:
if (atapi_passthru16)
return ATAPI_PASS_THRU;
/* fall thru */
libata: uninline atapi_cmd_type() Uninline atapi_cmd_type(). It doesn't really have to be inline and more case will be added which need to access unexported libata variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-02 02:28:46 -06:00
default:
return ATAPI_MISC;
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
* ata_tf_to_fis - Convert ATA taskfile to SATA FIS structure
* @tf: Taskfile to convert
* @pmp: Port multiplier port
libata: add @is_cmd to ata_tf_to_fis() Add @is_cmd to ata_tf_to_fis(). This controls bit 7 of the second byte which tells the device whether this H2D FIS is for a command or not. This cleans up ahci a bit and will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:38 -06:00
* @is_cmd: This FIS is for command
* @fis: Buffer into which data will output
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* Converts a standard ATA taskfile to a Serial ATA
* FIS structure (Register - Host to Device).
*
* LOCKING:
* Inherited from caller.
*/
libata: add @is_cmd to ata_tf_to_fis() Add @is_cmd to ata_tf_to_fis(). This controls bit 7 of the second byte which tells the device whether this H2D FIS is for a command or not. This cleans up ahci a bit and will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:38 -06:00
void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
libata: add @is_cmd to ata_tf_to_fis() Add @is_cmd to ata_tf_to_fis(). This controls bit 7 of the second byte which tells the device whether this H2D FIS is for a command or not. This cleans up ahci a bit and will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:38 -06:00
fis[0] = 0x27; /* Register - Host to Device FIS */
fis[1] = pmp & 0xf; /* Port multiplier number*/
if (is_cmd)
fis[1] |= (1 << 7); /* bit 7 indicates Command FIS */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
fis[2] = tf->command;
fis[3] = tf->feature;
fis[4] = tf->lbal;
fis[5] = tf->lbam;
fis[6] = tf->lbah;
fis[7] = tf->device;
fis[8] = tf->hob_lbal;
fis[9] = tf->hob_lbam;
fis[10] = tf->hob_lbah;
fis[11] = tf->hob_feature;
fis[12] = tf->nsect;
fis[13] = tf->hob_nsect;
fis[14] = 0;
fis[15] = tf->ctl;
fis[16] = 0;
fis[17] = 0;
fis[18] = 0;
fis[19] = 0;
}
/**
* ata_tf_from_fis - Convert SATA FIS to ATA taskfile
* @fis: Buffer from which data will be input
* @tf: Taskfile to output
*
[PATCH] libata: fix comments on ata_tf_from_fis() Fix description on comments for ata_tf_from_fis(). Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-12 16:55:45 -07:00
* Converts a serial ATA FIS structure to a standard ATA taskfile.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* LOCKING:
* Inherited from caller.
*/
libata: const-ification bombing run Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect.
2005-10-22 12:27:05 -06:00
void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
tf->command = fis[2]; /* status */
tf->feature = fis[3]; /* error */
tf->lbal = fis[4];
tf->lbam = fis[5];
tf->lbah = fis[6];
tf->device = fis[7];
tf->hob_lbal = fis[8];
tf->hob_lbam = fis[9];
tf->hob_lbah = fis[10];
tf->nsect = fis[12];
tf->hob_nsect = fis[13];
}
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
static const u8 ata_rw_cmds[] = {
/* pio multi */
ATA_CMD_READ_MULTI,
ATA_CMD_WRITE_MULTI,
ATA_CMD_READ_MULTI_EXT,
ATA_CMD_WRITE_MULTI_EXT,
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
0,
0,
0,
ATA_CMD_WRITE_MULTI_FUA_EXT,
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
/* pio */
ATA_CMD_PIO_READ,
ATA_CMD_PIO_WRITE,
ATA_CMD_PIO_READ_EXT,
ATA_CMD_PIO_WRITE_EXT,
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
0,
0,
0,
0,
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
/* dma */
ATA_CMD_READ,
ATA_CMD_WRITE,
ATA_CMD_READ_EXT,
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
ATA_CMD_WRITE_EXT,
0,
0,
0,
ATA_CMD_WRITE_FUA_EXT
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
* ata_rwcmd_protocol - set taskfile r/w commands and protocol
[PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() Separate out rw ATA taskfile building from ata_scsi_rw_xlat() into ata_build_rw_tf(). This will be used to improve media error handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:10 -07:00
* @tf: command to examine and configure
* @dev: device tf belongs to
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
[libata] export ata_dev_pair; trim trailing whitespace Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 07:56:57 -07:00
* Examine the device configuration and tf->flags to calculate
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
* the proper read/write commands and protocol to use.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* LOCKING:
* caller.
*/
[PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() Separate out rw ATA taskfile building from ata_scsi_rw_xlat() into ata_build_rw_tf(). This will be used to improve media error handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:10 -07:00
static int ata_rwcmd_protocol(struct ata_taskfile *tf, struct ata_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
u8 cmd;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
int index, fua, lba48, write;
[libata] export ata_dev_pair; trim trailing whitespace Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 07:56:57 -07:00
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
fua = (tf->flags & ATA_TFLAG_FUA) ? 4 : 0;
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
lba48 = (tf->flags & ATA_TFLAG_LBA48) ? 2 : 0;
write = (tf->flags & ATA_TFLAG_WRITE) ? 1 : 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
if (dev->flags & ATA_DFLAG_PIO) {
tf->protocol = ATA_PROT_PIO;
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
index = dev->multi_count ? 0 : 8;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
} else if (lba48 && (dev->link->ap->flags & ATA_FLAG_PIO_LBA48)) {
[PATCH] libata: Fix heuristic typos add LBA48PIO flag and support code, add IRQ flag for next diff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-17 13:50:31 -07:00
/* Unable to use DMA due to host limitation */
tf->protocol = ATA_PROT_PIO;
[PATCH] libata: minor fix for 2.6.16-rc3 - Fix the array index value in ata_rwcmd_protocol() for the added FUA commands. - Filter out ATAPI packet command error messages in ata_pio_error() Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-13 03:55:25 -07:00
index = dev->multi_count ? 0 : 8;
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
} else {
tf->protocol = ATA_PROT_DMA;
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
index = 16;
[PATCH] libata CHS: calculate read/write commands and protocol on the fly (revise #6) - merge ata_prot_to_cmd() and ata_dev_set_protocol() as ata_rwcmd_protocol() - pave road for read/write multiple support - remove usage of pre-cached command and protocol values and call ata_rwcmd_protocol() instead Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-12 01:06:27 -06:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[BLOCK] add FUA support to libata Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2006-01-06 01:56:18 -07:00
cmd = ata_rw_cmds[index + fua + lba48 + write];
if (cmd) {
tf->command = cmd;
return 0;
}
return -1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: implement ata_tf_read_block() Implement ata_tf_read_block(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 06:37:35 -07:00
/**
* ata_tf_read_block - Read block address from ATA taskfile
* @tf: ATA taskfile of interest
* @dev: ATA device @tf belongs to
*
* LOCKING:
* None.
*
* Read block address from @tf. This function can handle all
* three address formats - LBA, LBA48 and CHS. tf->protocol and
* flags select the address format to use.
*
* RETURNS:
* Block address read from @tf.
*/
u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev)
{
u64 block = 0;
if (tf->flags & ATA_TFLAG_LBA) {
if (tf->flags & ATA_TFLAG_LBA48) {
block |= (u64)tf->hob_lbah << 40;
block |= (u64)tf->hob_lbam << 32;
libata: Avoid overflow in ata_tf_read_block() when tf->hba_lbal > 127 Phillip O'Donnell <phillip.odonnell@gmail.com> pointed out that the same sign extension bug that was fixed in commit ba14a9c2 ("libata: Avoid overflow in ata_tf_to_lba48() when tf->hba_lbal > 127") also appears to exist in ata_tf_read_block(). Fix this by adding a cast to u64. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-04 11:34:48 -07:00
block |= (u64)tf->hob_lbal << 24;
[PATCH] libata: implement ata_tf_read_block() Implement ata_tf_read_block(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 06:37:35 -07:00
} else
block |= (tf->device & 0xf) << 24;
block |= tf->lbah << 16;
block |= tf->lbam << 8;
block |= tf->lbal;
} else {
u32 cyl, head, sect;
cyl = tf->lbam | (tf->lbah << 8);
head = tf->device & 0xf;
sect = tf->lbal;
libata: fix off-by-one error in ata_tf_read_block() ata_tf_read_block() has off-by-one error when converting CHS address to LBA. The bug isn't very visible because ata_tf_read_block() is used only when generating sense data for a failed RW command and CHS addressing isn't used too often these days. This problem was spotted by Atsushi Nemoto. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-16 06:21:21 -06:00
if (!sect) {
ata_dev_printk(dev, KERN_WARNING, "device reported "
"invalid CHS sector 0\n");
sect = 1; /* oh well */
}
block = (cyl * dev->heads + head) * dev->sectors + sect - 1;
[PATCH] libata: implement ata_tf_read_block() Implement ata_tf_read_block(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 06:37:35 -07:00
}
return block;
}
[PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() Separate out rw ATA taskfile building from ata_scsi_rw_xlat() into ata_build_rw_tf(). This will be used to improve media error handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:10 -07:00
/**
* ata_build_rw_tf - Build ATA taskfile for given read/write request
* @tf: Target ATA taskfile
* @dev: ATA device @tf belongs to
* @block: Block address
* @n_block: Number of blocks
* @tf_flags: RW/FUA etc...
* @tag: tag
*
* LOCKING:
* None.
*
* Build ATA taskfile @tf for read/write request described by
* @block, @n_block, @tf_flags and @tag on @dev.
*
* RETURNS:
*
* 0 on success, -ERANGE if the request is too large for @dev,
* -EINVAL if the request is invalid.
*/
int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
u64 block, u32 n_block, unsigned int tf_flags,
unsigned int tag)
{
tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf->flags |= tf_flags;
libata: separate out ata_ncq_enabled() Separate out ata_ncq_enabled(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20 07:20:27 -07:00
if (ata_ncq_enabled(dev) && likely(tag != ATA_TAG_INTERNAL)) {
[PATCH] libata: separate out rw ATA taskfile building into ata_build_rw_tf() Separate out rw ATA taskfile building from ata_scsi_rw_xlat() into ata_build_rw_tf(). This will be used to improve media error handling. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:10 -07:00
/* yay, NCQ */
if (!lba_48_ok(block, n_block))
return -ERANGE;
tf->protocol = ATA_PROT_NCQ;
tf->flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
if (tf->flags & ATA_TFLAG_WRITE)
tf->command = ATA_CMD_FPDMA_WRITE;
else
tf->command = ATA_CMD_FPDMA_READ;
tf->nsect = tag << 3;
tf->hob_feature = (n_block >> 8) & 0xff;
tf->feature = n_block & 0xff;
tf->hob_lbah = (block >> 40) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
tf->lbah = (block >> 16) & 0xff;
tf->lbam = (block >> 8) & 0xff;
tf->lbal = block & 0xff;
tf->device = 1 << 6;
if (tf->flags & ATA_TFLAG_FUA)
tf->device |= 1 << 7;
} else if (dev->flags & ATA_DFLAG_LBA) {
tf->flags |= ATA_TFLAG_LBA;
if (lba_28_ok(block, n_block)) {
/* use LBA28 */
tf->device |= (block >> 24) & 0xf;
} else if (lba_48_ok(block, n_block)) {
if (!(dev->flags & ATA_DFLAG_LBA48))
return -ERANGE;
/* use LBA48 */
tf->flags |= ATA_TFLAG_LBA48;
tf->hob_nsect = (n_block >> 8) & 0xff;
tf->hob_lbah = (block >> 40) & 0xff;
tf->hob_lbam = (block >> 32) & 0xff;
tf->hob_lbal = (block >> 24) & 0xff;
} else
/* request too large even for LBA48 */
return -ERANGE;
if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
return -EINVAL;
tf->nsect = n_block & 0xff;
tf->lbah = (block >> 16) & 0xff;
tf->lbam = (block >> 8) & 0xff;
tf->lbal = block & 0xff;
tf->device |= ATA_LBA;
} else {
/* CHS */
u32 sect, head, cyl, track;
/* The request -may- be too large for CHS addressing. */
if (!lba_28_ok(block, n_block))
return -ERANGE;
if (unlikely(ata_rwcmd_protocol(tf, dev) < 0))
return -EINVAL;
/* Convert LBA to CHS */
track = (u32)block / dev->sectors;
cyl = track / dev->heads;
head = track % dev->heads;
sect = (u32)block % dev->sectors + 1;
DPRINTK("block %u track %u cyl %u head %u sect %u\n",
(u32)block, track, cyl, head, sect);
/* Check whether the converted CHS can fit.
Cylinder: 0-65535
Head: 0-15
Sector: 1-255*/
if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect))
return -ERANGE;
tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */
tf->lbal = sect;
tf->lbam = cyl;
tf->lbah = cyl >> 8;
tf->device |= head;
}
return 0;
}
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
/**
* ata_pack_xfermask - Pack pio, mwdma and udma masks into xfer_mask
* @pio_mask: pio_mask
* @mwdma_mask: mwdma_mask
* @udma_mask: udma_mask
*
* Pack @pio_mask, @mwdma_mask and @udma_mask into a single
* unsigned int xfer_mask.
*
* LOCKING:
* None.
*
* RETURNS:
* Packed xfer_mask.
*/
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
unsigned long ata_pack_xfermask(unsigned long pio_mask,
unsigned long mwdma_mask,
unsigned long udma_mask)
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
{
return ((pio_mask << ATA_SHIFT_PIO) & ATA_MASK_PIO) |
((mwdma_mask << ATA_SHIFT_MWDMA) & ATA_MASK_MWDMA) |
((udma_mask << ATA_SHIFT_UDMA) & ATA_MASK_UDMA);
}
[PATCH] libata: implement ata_unpack_xfermask() Implement ata_unpack_xfermask(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 22:07:49 -07:00
/**
* ata_unpack_xfermask - Unpack xfer_mask into pio, mwdma and udma masks
* @xfer_mask: xfer_mask to unpack
* @pio_mask: resulting pio_mask
* @mwdma_mask: resulting mwdma_mask
* @udma_mask: resulting udma_mask
*
* Unpack @xfer_mask into @pio_mask, @mwdma_mask and @udma_mask.
* Any NULL distination masks will be ignored.
*/
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
void ata_unpack_xfermask(unsigned long xfer_mask, unsigned long *pio_mask,
unsigned long *mwdma_mask, unsigned long *udma_mask)
[PATCH] libata: implement ata_unpack_xfermask() Implement ata_unpack_xfermask(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 22:07:49 -07:00
{
if (pio_mask)
*pio_mask = (xfer_mask & ATA_MASK_PIO) >> ATA_SHIFT_PIO;
if (mwdma_mask)
*mwdma_mask = (xfer_mask & ATA_MASK_MWDMA) >> ATA_SHIFT_MWDMA;
if (udma_mask)
*udma_mask = (xfer_mask & ATA_MASK_UDMA) >> ATA_SHIFT_UDMA;
}
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
static const struct ata_xfer_ent {
[PATCH] libata: fix ata_xfer_tbl termination ata_xfer_tbl is terminated by entry with -1 as ->shift. However, ->shift was unsigned int making the termination condition bogus. This patch converts ->shift and ->bits to int. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 06:48:52 -07:00
int shift, bits;
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
u8 base;
} ata_xfer_tbl[] = {
libata: clean up xfermode / PATA timing related stuff * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:40 -07:00
{ ATA_SHIFT_PIO, ATA_NR_PIO_MODES, XFER_PIO_0 },
{ ATA_SHIFT_MWDMA, ATA_NR_MWDMA_MODES, XFER_MW_DMA_0 },
{ ATA_SHIFT_UDMA, ATA_NR_UDMA_MODES, XFER_UDMA_0 },
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
{ -1, },
};
/**
* ata_xfer_mask2mode - Find matching XFER_* for the given xfer_mask
* @xfer_mask: xfer_mask of interest
*
* Return matching XFER_* value for @xfer_mask. Only the highest
* bit of @xfer_mask is considered.
*
* LOCKING:
* None.
*
* RETURNS:
libata: clean up xfermode / PATA timing related stuff * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:40 -07:00
* Matching XFER_* value, 0xff if no match found.
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
*/
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
u8 ata_xfer_mask2mode(unsigned long xfer_mask)
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
{
int highbit = fls(xfer_mask) - 1;
const struct ata_xfer_ent *ent;
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
if (highbit >= ent->shift && highbit < ent->shift + ent->bits)
return ent->base + highbit - ent->shift;
libata: clean up xfermode / PATA timing related stuff * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:40 -07:00
return 0xff;
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
}
/**
* ata_xfer_mode2mask - Find matching xfer_mask for XFER_*
* @xfer_mode: XFER_* of interest
*
* Return matching xfer_mask for @xfer_mode.
*
* LOCKING:
* None.
*
* RETURNS:
* Matching xfer_mask, 0 if no match found.
*/
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
unsigned long ata_xfer_mode2mask(u8 xfer_mode)
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
{
const struct ata_xfer_ent *ent;
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
libata: clean up xfermode / PATA timing related stuff * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:40 -07:00
return ((2 << (ent->shift + xfer_mode - ent->base)) - 1)
& ~((1 << ent->shift) - 1);
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
return 0;
}
/**
* ata_xfer_mode2shift - Find matching xfer_shift for XFER_*
* @xfer_mode: XFER_* of interest
*
* Return matching xfer_shift for @xfer_mode.
*
* LOCKING:
* None.
*
* RETURNS:
* Matching xfer_shift, -1 if no match found.
*/
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
int ata_xfer_mode2shift(unsigned long xfer_mode)
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
{
const struct ata_xfer_ent *ent;
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
if (xfer_mode >= ent->base && xfer_mode < ent->base + ent->bits)
return ent->shift;
return -1;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
[PATCH] libata: improve xfer mask constants and update ata_mode_string() Add ATA_BITS_*, ATA_MASK_* macros and reorder xfer_mask fields such that higher transfer mode is placed at higher order bit. As thie reordering breaks ata_mode_string(), this patch also rewrites ata_mode_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
* ata_mode_string - convert xfer_mask to string
* @xfer_mask: mask of bits supported; only highest bit counts.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* Determine string which represents the highest speed
[PATCH] libata: improve xfer mask constants and update ata_mode_string() Add ATA_BITS_*, ATA_MASK_* macros and reorder xfer_mask fields such that higher transfer mode is placed at higher order bit. As thie reordering breaks ata_mode_string(), this patch also rewrites ata_mode_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
* (highest bit in @modemask).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* LOCKING:
* None.
*
* RETURNS:
* Constant C string representing highest speed listed in
[PATCH] libata: improve xfer mask constants and update ata_mode_string() Add ATA_BITS_*, ATA_MASK_* macros and reorder xfer_mask fields such that higher transfer mode is placed at higher order bit. As thie reordering breaks ata_mode_string(), this patch also rewrites ata_mode_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
* @mode_mask, or the constant C string "<n/a>".
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
const char *ata_mode_string(unsigned long xfer_mask)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
[PATCH] libata: kill unused xfer_mode functions Preceding xfer_mask changes make the following functions unused. ata_pio_modes(), base_from_shift(), ata_pr_blacklisted(), fgb() Kill them. Also, as xfer_mode_str[] is now only used by ata_mode_string(), move it into the function. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
static const char * const xfer_mode_str[] = {
"PIO0",
"PIO1",
"PIO2",
"PIO3",
"PIO4",
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
"PIO5",
"PIO6",
[PATCH] libata: kill unused xfer_mode functions Preceding xfer_mask changes make the following functions unused. ata_pio_modes(), base_from_shift(), ata_pr_blacklisted(), fgb() Kill them. Also, as xfer_mode_str[] is now only used by ata_mode_string(), move it into the function. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
"MWDMA0",
"MWDMA1",
"MWDMA2",
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
"MWDMA3",
"MWDMA4",
[PATCH] libata: kill unused xfer_mode functions Preceding xfer_mask changes make the following functions unused. ata_pio_modes(), base_from_shift(), ata_pr_blacklisted(), fgb() Kill them. Also, as xfer_mode_str[] is now only used by ata_mode_string(), move it into the function. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
"UDMA/16",
"UDMA/25",
"UDMA/33",
"UDMA/44",
"UDMA/66",
"UDMA/100",
"UDMA/133",
"UDMA7",
};
[PATCH] libata: improve xfer mask constants and update ata_mode_string() Add ATA_BITS_*, ATA_MASK_* macros and reorder xfer_mask fields such that higher transfer mode is placed at higher order bit. As thie reordering breaks ata_mode_string(), this patch also rewrites ata_mode_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
int highbit;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: improve xfer mask constants and update ata_mode_string() Add ATA_BITS_*, ATA_MASK_* macros and reorder xfer_mask fields such that higher transfer mode is placed at higher order bit. As thie reordering breaks ata_mode_string(), this patch also rewrites ata_mode_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
highbit = fls(xfer_mask) - 1;
if (highbit >= 0 && highbit < ARRAY_SIZE(xfer_mode_str))
return xfer_mode_str[highbit];
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return "<n/a>";
}
[PATCH] libata: separate out ata_spd_string() Separate out ata_spd_string() from sata_print_link_status(). This will be used by SATA spd configuration routines. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:17 -07:00
static const char *sata_spd_string(unsigned int spd)
{
static const char * const spd_str[] = {
"1.5 Gbps",
"3.0 Gbps",
[libata] ahci: Add SATA GEN3 related messages The present AHCI driver seems to support SATA GEN 3 speed, but the related messages should be modified. Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-29 20:00:37 -07:00
"6.0 Gbps",
[PATCH] libata: separate out ata_spd_string() Separate out ata_spd_string() from sata_print_link_status(). This will be used by SATA spd configuration routines. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:17 -07:00
};
if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str))
return "<unknown>";
return spd_str[spd - 1];
}
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
{
struct ata_link *link = dev->link;
struct ata_port *ap = link->ap;
u32 scontrol;
unsigned int err_mask;
int rc;
/*
* disallow DIPM for drivers which haven't set
* ATA_FLAG_IPM. This is because when DIPM is enabled,
* phy ready will be set in the interrupt status on
* state changes, which will cause some drivers to
* think there are errors - additionally drivers will
* need to disable hot plug.
*/
if (!(ap->flags & ATA_FLAG_IPM) || !ata_dev_enabled(dev)) {
ap->pm_policy = NOT_AVAILABLE;
return -EINVAL;
}
/*
* For DIPM, we will only enable it for the
* min_power setting.
*
* Why? Because Disks are too stupid to know that
* If the host rejects a request to go to SLUMBER
* they should retry at PARTIAL, and instead it
* just would give up. So, for medium_power to
* work at all, we need to only allow HIPM.
*/
rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
if (rc)
return rc;
switch (policy) {
case MIN_POWER:
/* no restrictions on IPM transitions */
scontrol &= ~(0x3 << 8);
rc = sata_scr_write(link, SCR_CONTROL, scontrol);
if (rc)
return rc;
/* enable DIPM */
if (dev->flags & ATA_DFLAG_DIPM)
err_mask = ata_dev_set_feature(dev,
SETFEATURES_SATA_ENABLE, SATA_DIPM);
break;
case MEDIUM_POWER:
/* allow IPM to PARTIAL */
scontrol &= ~(0x1 << 8);
scontrol |= (0x2 << 8);
rc = sata_scr_write(link, SCR_CONTROL, scontrol);
if (rc)
return rc;
libata: Don't disable dipm with SET FEATURES LPM seems to get hung up while disabling DIPM, and after thinking about this a bit, I don't think we really need to manually disable it anyway. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-02 17:37:08 -06:00
/*
* we don't have to disable DIPM since IPM flags
* disallow transitions to SLUMBER, which effectively
* disable DIPM if it does not support PARTIAL
*/
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
break;
case NOT_AVAILABLE:
case MAX_PERFORMANCE:
/* disable all IPM transitions */
scontrol |= (0x3 << 8);
rc = sata_scr_write(link, SCR_CONTROL, scontrol);
if (rc)
return rc;
libata: Don't disable dipm with SET FEATURES LPM seems to get hung up while disabling DIPM, and after thinking about this a bit, I don't think we really need to manually disable it anyway. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-02 17:37:08 -06:00
/*
* we don't have to disable DIPM since IPM flags
* disallow all transitions which effectively
* disable DIPM anyway.
*/
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
break;
}
/* FIXME: handle SET FEATURES failure */
(void) err_mask;
return 0;
}
/**
* ata_dev_enable_pm - enable SATA interface power management
libata: fix docbook Fix docbook format in the comments. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-31 11:00:27 -06:00
* @dev: device to enable power management
* @policy: the link power management policy
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
*
* Enable SATA Interface power management. This will enable
* Device Interface Power Management (DIPM) for min_power
* policy, and then call driver specific callbacks for
* enabling Host Initiated Power management.
*
* Locking: Caller.
* Returns: -EINVAL if IPM is not supported, 0 otherwise.
*/
void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy)
{
int rc = 0;
struct ata_port *ap = dev->link->ap;
/* set HIPM first, then DIPM */
if (ap->ops->enable_pm)
rc = ap->ops->enable_pm(ap, policy);
if (rc)
goto enable_pm_out;
rc = ata_dev_set_dipm(dev, policy);
enable_pm_out:
if (rc)
ap->pm_policy = MAX_PERFORMANCE;
else
ap->pm_policy = policy;
return /* rc */; /* hopefully we can use 'rc' eventually */
}
libata: suppress two warnings drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 21:53:32 -06:00
#ifdef CONFIG_PM
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
/**
* ata_dev_disable_pm - disable SATA interface power management
libata: fix docbook Fix docbook format in the comments. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-31 11:00:27 -06:00
* @dev: device to disable power management
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
*
* Disable SATA Interface power management. This will disable
* Device Interface Power Management (DIPM) without changing
* policy, call driver specific callbacks for disabling Host
* Initiated Power management.
*
* Locking: Caller.
* Returns: void
*/
static void ata_dev_disable_pm(struct ata_device *dev)
{
struct ata_port *ap = dev->link->ap;
ata_dev_set_dipm(dev, MAX_PERFORMANCE);
if (ap->ops->disable_pm)
ap->ops->disable_pm(ap);
}
libata: suppress two warnings drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 21:53:32 -06:00
#endif /* CONFIG_PM */
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
void ata_lpm_schedule(struct ata_port *ap, enum link_pm policy)
{
ap->pm_policy = policy;
libata: ATA_EHI_LPM should be ATA_EH_LPM EH actions are ATA_EH_* not ATA_EHI_*. Rename ATA_EHI_LPM to ATA_EH_LPM. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-27 03:37:14 -06:00
ap->link.eh_info.action |= ATA_EH_LPM;
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
ap->link.eh_info.flags |= ATA_EHI_NO_AUTOPSY;
ata_port_schedule_eh(ap);
}
libata: suppress two warnings drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 21:53:32 -06:00
#ifdef CONFIG_PM
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
static void ata_lpm_enable(struct ata_host *host)
{
struct ata_link *link;
struct ata_port *ap;
struct ata_device *dev;
int i;
for (i = 0; i < host->n_ports; i++) {
ap = host->ports[i];
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_link(link, ap, EDGE) {
ata_for_each_dev(dev, link, ALL)
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
ata_dev_disable_pm(dev);
}
}
}
static void ata_lpm_disable(struct ata_host *host)
{
int i;
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_lpm_schedule(ap, ap->pm_policy);
}
}
libata: suppress two warnings drivers/ata/libata-core.c:768: warning: 'ata_lpm_enable' defined but not used drivers/ata/libata-core.c:784: warning: 'ata_lpm_disable' defined but not used Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 21:53:32 -06:00
#endif /* CONFIG_PM */
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
* ata_dev_classify - determine device type based on ATA-spec signature
* @tf: ATA taskfile register set for device to be identified
*
* Determine from taskfile register contents whether a device is
* ATA or ATAPI, as per "Signature and persistence" section
* of ATA/PI spec (volume 1, sect 5.14).
*
* LOCKING:
* None.
*
* RETURNS:
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
* Device type, %ATA_DEV_ATA, %ATA_DEV_ATAPI, %ATA_DEV_PMP or
* %ATA_DEV_UNKNOWN the event of failure.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
libata: const-ification bombing run Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect.
2005-10-22 12:27:05 -06:00
unsigned int ata_dev_classify(const struct ata_taskfile *tf)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
/* Apple's open source Darwin code hints that some devices only
* put a proper signature into the LBA mid/high registers,
* So, we only check those. It's sufficient for uniqueness.
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
*
* ATA/ATAPI-7 (d1532v1r1: Feb. 19, 2003) specified separate
* signatures for ATA and ATAPI devices attached on SerialATA,
* 0x3c/0xc3 and 0x69/0x96 respectively. However, SerialATA
* spec has never mentioned about using different signatures
* for ATA/ATAPI devices. Then, Serial ATA II: Port
* Multiplier specification began to use 0x69/0x96 to identify
* port multpliers and 0x3c/0xc3 to identify SEMB device.
* ATA/ATAPI-7 dropped descriptions about 0x3c/0xc3 and
* 0x69/0x96 shortly and described them as reserved for
* SerialATA.
*
* We follow the current spec and consider that 0x69/0x96
* identifies a port multiplier and 0x3c/0xc3 a SEMB device.
libata: handle SEMB signature better WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Haun <drhaun88@gmail.com> Reported-by: Lars Wirzenius <liw@liw.fi> Reported-by: Juan Manuel <jmcarranza@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-14 15:21:10 -06:00
* Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
* SEMB signature. This is worked around in
* ata_dev_read_id().
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
if ((tf->lbam == 0) && (tf->lbah == 0)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DPRINTK("found ATA device by sig\n");
return ATA_DEV_ATA;
}
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
if ((tf->lbam == 0x14) && (tf->lbah == 0xeb)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DPRINTK("found ATAPI device by sig\n");
return ATA_DEV_ATAPI;
}
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
if ((tf->lbam == 0x69) && (tf->lbah == 0x96)) {
DPRINTK("found PMP device by sig\n");
return ATA_DEV_PMP;
}
if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
libata: handle SEMB signature better WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Haun <drhaun88@gmail.com> Reported-by: Lars Wirzenius <liw@liw.fi> Reported-by: Juan Manuel <jmcarranza@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-14 15:21:10 -06:00
DPRINTK("found SEMB device by sig (could be ATA device)\n");
return ATA_DEV_SEMB;
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DPRINTK("unknown device\n");
return ATA_DEV_UNKNOWN;
}
/**
[PATCH] libata: rename ata_dev_id_[c_]string() This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 18:02:46 -07:00
* ata_id_string - Convert IDENTIFY DEVICE page into string
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* @id: IDENTIFY DEVICE results we will examine
* @s: string into which data is output
* @ofs: offset into identify device page
* @len: length of string to return. must be an even number.
*
* The strings in the IDENTIFY DEVICE page are broken up into
* 16-bit chunks. Run through the string, and output each
* 8-bit chunk linearly, regardless of platform.
*
* LOCKING:
* caller.
*/
[PATCH] libata: rename ata_dev_id_[c_]string() This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 18:02:46 -07:00
void ata_id_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
unsigned int c;
pata_it821x: Driver updates and reworking - Add support for the RDC 1010 variant - Rework the core library to have a read_id method. This allows the hacky bits of it821x to go and prepares us for pata_hd - Switch from WARN to BUG in ata_id_string as it will reboot if you get it wrong so WARN won't be seen - Allow the issue of command 0xFC on the 821x. This is needed to query rebuild status. - Tidy up printk formatting - Do more ident rewriting on RAID volumes to handle firmware provided ident data which is rather wonky - Report the firmware revision and device layout in RAID mode - Don't try and disable raid on the 8211 or RDC - they don't have the relevant bits Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-24 10:16:06 -06:00
BUG_ON(len & 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
while (len > 0) {
c = id[ofs] >> 8;
*s = c;
s++;
c = id[ofs] & 0xff;
*s = c;
s++;
ofs++;
len -= 2;
}
}
[PATCH] libata: implement ata_dev_id_c_string() ata_dev_id_c_string() reads ATA string from the specified offset of the given IDENTIFY PAGE and puts it in the specified buffer in trimmed and NULL-terminated form. The caller must supply a buffer which is one byte larger than the maximum size of the target ID string. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:04 -07:00
/**
[PATCH] libata: rename ata_dev_id_[c_]string() This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 18:02:46 -07:00
* ata_id_c_string - Convert IDENTIFY DEVICE page into C string
[PATCH] libata: implement ata_dev_id_c_string() ata_dev_id_c_string() reads ATA string from the specified offset of the given IDENTIFY PAGE and puts it in the specified buffer in trimmed and NULL-terminated form. The caller must supply a buffer which is one byte larger than the maximum size of the target ID string. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:04 -07:00
* @id: IDENTIFY DEVICE results we will examine
* @s: string into which data is output
* @ofs: offset into identify device page
* @len: length of string to return. must be an odd number.
*
[PATCH] libata: rename ata_dev_id_[c_]string() This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 18:02:46 -07:00
* This function is identical to ata_id_string except that it
[PATCH] libata: implement ata_dev_id_c_string() ata_dev_id_c_string() reads ATA string from the specified offset of the given IDENTIFY PAGE and puts it in the specified buffer in trimmed and NULL-terminated form. The caller must supply a buffer which is one byte larger than the maximum size of the target ID string. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:04 -07:00
* trims trailing spaces and terminates the resulting string with
* null. @len must be actual maximum length (even number) + 1.
*
* LOCKING:
* caller.
*/
[PATCH] libata: rename ata_dev_id_[c_]string() This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 18:02:46 -07:00
void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len)
[PATCH] libata: implement ata_dev_id_c_string() ata_dev_id_c_string() reads ATA string from the specified offset of the given IDENTIFY PAGE and puts it in the specified buffer in trimmed and NULL-terminated form. The caller must supply a buffer which is one byte larger than the maximum size of the target ID string. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:04 -07:00
{
unsigned char *p;
[PATCH] libata: rename ata_dev_id_[c_]string() This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 18:02:46 -07:00
ata_id_string(id, s, ofs, len - 1);
[PATCH] libata: implement ata_dev_id_c_string() ata_dev_id_c_string() reads ATA string from the specified offset of the given IDENTIFY PAGE and puts it in the specified buffer in trimmed and NULL-terminated form. The caller must supply a buffer which is one byte larger than the maximum size of the target ID string. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:04 -07:00
p = s + strnlen(s, len - 1);
while (p > s && p[-1] == ' ')
p--;
*p = '\0';
}
libata: update inline source docs
2005-06-02 16:17:13 -06:00
libata: move ata_id_n_sectors() upward Move ata_id_n_sectors() upward right below ata_id_c_string(). This is to accomodate later changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:31:58 -06:00
static u64 ata_id_n_sectors(const u16 *id)
{
if (ata_id_has_lba(id)) {
if (ata_id_has_lba48(id))
libata: Don't trust current capacity values in identify words 57-58 Hanno Böck reported a problem where an old Conner CP30254 240MB hard drive was reported as 1.1TB in capacity by libata: http://lkml.org/lkml/2009/2/13/134 This was caused by libata trusting the drive's reported current capacity in sectors in identify words 57 and 58 if the drive does not support LBA and the current CHS translation values appear valid. Unfortunately it seems older ATA specs were vague about what this field should contain and a number of drives used values with wrong byte order or that were totally bogus. There's no unique information that it conveys and so we can just calculate the number of sectors from the reported current CHS values. While we're at it, clean up this function to use named constants for the identify word values. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-16 19:15:08 -07:00
return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
libata: move ata_id_n_sectors() upward Move ata_id_n_sectors() upward right below ata_id_c_string(). This is to accomodate later changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:31:58 -06:00
else
libata: Don't trust current capacity values in identify words 57-58 Hanno Böck reported a problem where an old Conner CP30254 240MB hard drive was reported as 1.1TB in capacity by libata: http://lkml.org/lkml/2009/2/13/134 This was caused by libata trusting the drive's reported current capacity in sectors in identify words 57 and 58 if the drive does not support LBA and the current CHS translation values appear valid. Unfortunately it seems older ATA specs were vague about what this field should contain and a number of drives used values with wrong byte order or that were totally bogus. There's no unique information that it conveys and so we can just calculate the number of sectors from the reported current CHS values. While we're at it, clean up this function to use named constants for the identify word values. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-16 19:15:08 -07:00
return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
libata: move ata_id_n_sectors() upward Move ata_id_n_sectors() upward right below ata_id_c_string(). This is to accomodate later changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:31:58 -06:00
} else {
if (ata_id_current_chs_valid(id))
libata: Don't trust current capacity values in identify words 57-58 Hanno Böck reported a problem where an old Conner CP30254 240MB hard drive was reported as 1.1TB in capacity by libata: http://lkml.org/lkml/2009/2/13/134 This was caused by libata trusting the drive's reported current capacity in sectors in identify words 57 and 58 if the drive does not support LBA and the current CHS translation values appear valid. Unfortunately it seems older ATA specs were vague about what this field should contain and a number of drives used values with wrong byte order or that were totally bogus. There's no unique information that it conveys and so we can just calculate the number of sectors from the reported current CHS values. While we're at it, clean up this function to use named constants for the identify word values. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-16 19:15:08 -07:00
return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
id[ATA_ID_CUR_SECTORS];
libata: move ata_id_n_sectors() upward Move ata_id_n_sectors() upward right below ata_id_c_string(). This is to accomodate later changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:31:58 -06:00
else
libata: Don't trust current capacity values in identify words 57-58 Hanno Böck reported a problem where an old Conner CP30254 240MB hard drive was reported as 1.1TB in capacity by libata: http://lkml.org/lkml/2009/2/13/134 This was caused by libata trusting the drive's reported current capacity in sectors in identify words 57 and 58 if the drive does not support LBA and the current CHS translation values appear valid. Unfortunately it seems older ATA specs were vague about what this field should contain and a number of drives used values with wrong byte order or that were totally bogus. There's no unique information that it conveys and so we can just calculate the number of sectors from the reported current CHS values. While we're at it, clean up this function to use named constants for the identify word values. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-16 19:15:08 -07:00
return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
id[ATA_ID_SECTORS];
libata: move ata_id_n_sectors() upward Move ata_id_n_sectors() upward right below ata_id_c_string(). This is to accomodate later changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:31:58 -06:00
}
}
libata: make ata_tf_to_lba[48]() generic ata_tf_to_lba[48]() currently return LBA in tf + 1 for ata_read_native_max_address(). Make them return LBA and make it global so that it can be used to read LBA off TF for other purposes. ata_read_native_max_address() now adds 1 itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-27 04:14:23 -06:00
u64 ata_tf_to_lba48(const struct ata_taskfile *tf)
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
{
u64 sectors = 0;
sectors |= ((u64)(tf->hob_lbah & 0xff)) << 40;
sectors |= ((u64)(tf->hob_lbam & 0xff)) << 32;
libata: Avoid overflow in ata_tf_to_lba48() when tf->hba_lbal > 127 In ata_tf_to_lba48(), when evaluating (tf->hob_lbal & 0xff) << 24 the expression is promoted to signed int (since int can hold all values of u8). However, if hob_lbal is 128 or more, then it is treated as a negative signed value and sign-extended when promoted to u64 to | into sectors, which leads to the MSB 32 bits of section getting set incorrectly. For example, Phillip O'Donnell <phillip.odonnell@gmail.com> reported that a 1.5GB drive caused: ata3.00: HPA detected: current 2930277168, native 18446744072344861488 where 2930277168 == 0xAEA87B30 and 18446744072344861488 == 0xffffffffaea87b30 which shows the problem when hob_lbal is 0xae. Fix this by adding a cast to u64, just as is used by for hob_lbah and hob_lbam in the function. Reported-by: Phillip O'Donnell <phillip.odonnell@gmail.com> Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-28 17:52:20 -06:00
sectors |= ((u64)(tf->hob_lbal & 0xff)) << 24;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
sectors |= (tf->lbah & 0xff) << 16;
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
libata: make ata_tf_to_lba[48]() generic ata_tf_to_lba[48]() currently return LBA in tf + 1 for ata_read_native_max_address(). Make them return LBA and make it global so that it can be used to read LBA off TF for other purposes. ata_read_native_max_address() now adds 1 itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-27 04:14:23 -06:00
return sectors;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
}
libata: make ata_tf_to_lba[48]() generic ata_tf_to_lba[48]() currently return LBA in tf + 1 for ata_read_native_max_address(). Make them return LBA and make it global so that it can be used to read LBA off TF for other purposes. ata_read_native_max_address() now adds 1 itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-27 04:14:23 -06:00
u64 ata_tf_to_lba(const struct ata_taskfile *tf)
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
{
u64 sectors = 0;
sectors |= (tf->device & 0x0f) << 24;
sectors |= (tf->lbah & 0xff) << 16;
sectors |= (tf->lbam & 0xff) << 8;
sectors |= (tf->lbal & 0xff);
libata: make ata_tf_to_lba[48]() generic ata_tf_to_lba[48]() currently return LBA in tf + 1 for ata_read_native_max_address(). Make them return LBA and make it global so that it can be used to read LBA off TF for other purposes. ata_read_native_max_address() now adds 1 itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-27 04:14:23 -06:00
return sectors;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
}
/**
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
* ata_read_native_max_address - Read native max address
* @dev: target device
* @max_sectors: out parameter for the result native max address
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
*
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
* Perform an LBA48 or LBA28 native size query upon the device in
* question.
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
*
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
* RETURNS:
* 0 on success, -EACCES if command is aborted by the drive.
* -EIO on other errors.
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
*/
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
static int ata_read_native_max_address(struct ata_device *dev, u64 *max_sectors)
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
{
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
unsigned int err_mask;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
struct ata_taskfile tf;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
int lba48 = ata_id_has_lba48(dev->id);
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
ata_tf_init(dev, &tf);
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
/* always clear all address registers */
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
if (lba48) {
tf.command = ATA_CMD_READ_NATIVE_MAX_EXT;
tf.flags |= ATA_TFLAG_LBA48;
} else
tf.command = ATA_CMD_READ_NATIVE_MAX;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
tf.protocol |= ATA_PROT_NODATA;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
tf.device |= ATA_LBA;
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
if (err_mask) {
ata_dev_printk(dev, KERN_WARNING, "failed to read native "
"max address (err_mask=0x%x)\n", err_mask);
if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
return -EACCES;
return -EIO;
}
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
if (lba48)
libata: make ata_tf_to_lba[48]() generic ata_tf_to_lba[48]() currently return LBA in tf + 1 for ata_read_native_max_address(). Make them return LBA and make it global so that it can be used to read LBA off TF for other purposes. ata_read_native_max_address() now adds 1 itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-27 04:14:23 -06:00
*max_sectors = ata_tf_to_lba48(&tf) + 1;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
else
libata: make ata_tf_to_lba[48]() generic ata_tf_to_lba[48]() currently return LBA in tf + 1 for ata_read_native_max_address(). Make them return LBA and make it global so that it can be used to read LBA off TF for other purposes. ata_read_native_max_address() now adds 1 itself. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-27 04:14:23 -06:00
*max_sectors = ata_tf_to_lba(&tf) + 1;
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
if (dev->horkage & ATA_HORKAGE_HPA_SIZE)
[PATCH] libata: Fix HPA handling regression Restore the support for handling drives that report one sector too many (ie SCSI not ATA style). This worked before the HPA update but was removed in that process. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-29 02:06:48 -06:00
(*max_sectors)--;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
return 0;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
}
/**
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
* ata_set_max_sectors - Set max sectors
* @dev: target device
libata: fix kernel-doc parameters Warning(linux-2.6.21-git4//drivers/ata/libata-core.c:904): No description found for parameter 'new_sectors' Warning(linux-2.6.21-git4//drivers/ata/libata-core.c:941): No description found for parameter 'new_sectors' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-01 18:35:55 -06:00
* @new_sectors: new max sectors value to set for the device
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
*
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
* Set max sectors of @dev to @new_sectors.
*
* RETURNS:
* 0 on success, -EACCES if command is aborted or denied (due to
* previous non-volatile SET_MAX) by the drive. -EIO on other
* errors.
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
*/
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
static int ata_set_max_sectors(struct ata_device *dev, u64 new_sectors)
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
{
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
unsigned int err_mask;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
struct ata_taskfile tf;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
int lba48 = ata_id_has_lba48(dev->id);
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
new_sectors--;
ata_tf_init(dev, &tf);
tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
if (lba48) {
tf.command = ATA_CMD_SET_MAX_EXT;
tf.flags |= ATA_TFLAG_LBA48;
tf.hob_lbal = (new_sectors >> 24) & 0xff;
tf.hob_lbam = (new_sectors >> 32) & 0xff;
tf.hob_lbah = (new_sectors >> 40) & 0xff;
libata: fix ata_set_max_sectors() In ata_set_max_sectors(), the highest nibble in LBA28 mode was missing. This made drives sized between 8G and 128G with HPA turned on to be resized to under 8G. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-21 05:07:14 -06:00
} else {
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
tf.command = ATA_CMD_SET_MAX;
libata: fix ata_set_max_sectors() In ata_set_max_sectors(), the highest nibble in LBA28 mode was missing. This made drives sized between 8G and 128G with HPA turned on to be resized to under 8G. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-21 05:07:14 -06:00
tf.device |= (new_sectors >> 24) & 0xf;
}
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
tf.protocol |= ATA_PROT_NODATA;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
tf.device |= ATA_LBA;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
tf.lbal = (new_sectors >> 0) & 0xff;
tf.lbam = (new_sectors >> 8) & 0xff;
tf.lbah = (new_sectors >> 16) & 0xff;
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
if (err_mask) {
ata_dev_printk(dev, KERN_WARNING, "failed to set "
"max address (err_mask=0x%x)\n", err_mask);
if (err_mask == AC_ERR_DEV &&
(tf.feature & (ATA_ABORTED | ATA_IDNF)))
return -EACCES;
return -EIO;
}
return 0;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
}
/**
* ata_hpa_resize - Resize a device with an HPA set
* @dev: Device to resize
*
* Read the size of an LBA28 or LBA48 disk with HPA features and resize
* it if required to the full size of the media. The caller must check
* the drive has the HPA feature set enabled.
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
*
* RETURNS:
* 0 on success, -errno on failure.
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
*/
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
static int ata_hpa_resize(struct ata_device *dev)
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
{
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
struct ata_eh_context *ehc = &dev->link->eh_context;
int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
u64 sectors = ata_id_n_sectors(dev->id);
u64 native_sectors;
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
int rc;
libata: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21 18:14:23 -06:00
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
/* do we need to do it? */
if (dev->class != ATA_DEV_ATA ||
!ata_id_has_lba(dev->id) || !ata_id_hpa_enabled(dev->id) ||
(dev->horkage & ATA_HORKAGE_BROKEN_HPA))
libata: clean up read/set native_max address functions Merge ata_read_native_max_addres_ext() into ata_read_native_max_address() and combine ata_set_native_max_address_ext() and ata_set_native_max_address() into ata_set_max_sectors(). * reduce duplicate code * return 0 or -errno depending on error conditions * report if command fails * use ATA_LBA instead of 0x40 This is in preparation of ata_hpa_resize() update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:30 -06:00
return 0;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
/* read native max address */
rc = ata_read_native_max_address(dev, &native_sectors);
if (rc) {
libata: improve HPA error handling There's no point in retrying and eventually failing device detection when the device rejects READ_NATIVE_MAX[_EXT]. Disable HPA unlocking if READ_NATIVE_MAX[_EXT] is rejected as done when SET_MAX[_EXT] is rejected. This allows some old drives to work even if they aren't blacklisted. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-23 06:05:15 -06:00
/* If device aborted the command or HPA isn't going to
* be unlocked, skip HPA resizing.
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
*/
libata: improve HPA error handling There's no point in retrying and eventually failing device detection when the device rejects READ_NATIVE_MAX[_EXT]. Disable HPA unlocking if READ_NATIVE_MAX[_EXT] is rejected as done when SET_MAX[_EXT] is rejected. This allows some old drives to work even if they aren't blacklisted. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-23 06:05:15 -06:00
if (rc == -EACCES || !ata_ignore_hpa) {
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
ata_dev_printk(dev, KERN_WARNING, "HPA support seems "
libata: improve HPA error handling There's no point in retrying and eventually failing device detection when the device rejects READ_NATIVE_MAX[_EXT]. Disable HPA unlocking if READ_NATIVE_MAX[_EXT] is rejected as done when SET_MAX[_EXT] is rejected. This allows some old drives to work even if they aren't blacklisted. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-23 06:05:15 -06:00
"broken, skipping HPA handling\n");
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
/* we can continue if device aborted the command */
if (rc == -EACCES)
rc = 0;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
}
libata: be less verbose about hpa There's no reason to print out hpa related messages when HPA is not active. Kill the unconditional message and add a warning message which is printed if HPA size is smaller than the current size. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-25 05:45:54 -06:00
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
return rc;
}
libata: accept late unlocking of HPA On certain configurations, HPA isn't or can't be unlocked during probing but it somehow ends up unlocked afterwards. In the following thread, the problem can be reliably reproduced after resuming from STR. The BIOS turns on HPA during boot but forgets to do it during resume. http://thread.gmane.org/gmane.linux.kernel/858310 This patch updates libata revalidation such that it considers native n_sectors. If the device size has increased to match native n_sectors, it's assumed that HPA has been unlocked involuntarily and the device is recognized as the same one. This should be fairly safe while nicely working around the problem. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christof Warlich <christof@warlich.name> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-15 02:11:41 -06:00
dev->n_native_sectors = native_sectors;
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
/* nothing to do? */
if (native_sectors <= sectors || !ata_ignore_hpa) {
if (!print_info || native_sectors == sectors)
return 0;
if (native_sectors > sectors)
ata_dev_printk(dev, KERN_INFO,
"HPA detected: current %llu, native %llu\n",
(unsigned long long)sectors,
(unsigned long long)native_sectors);
else if (native_sectors < sectors)
ata_dev_printk(dev, KERN_WARNING,
"native sectors (%llu) is smaller than "
"sectors (%llu)\n",
(unsigned long long)native_sectors,
(unsigned long long)sectors);
return 0;
}
/* let's unlock HPA */
rc = ata_set_max_sectors(dev, native_sectors);
if (rc == -EACCES) {
/* if device aborted the command, skip HPA resizing */
ata_dev_printk(dev, KERN_WARNING, "device aborted resize "
"(%llu -> %llu), skipping HPA handling\n",
(unsigned long long)sectors,
(unsigned long long)native_sectors);
dev->horkage |= ATA_HORKAGE_BROKEN_HPA;
return 0;
} else if (rc)
return rc;
/* re-read IDENTIFY data */
rc = ata_dev_reread_id(dev, 0);
if (rc) {
ata_dev_printk(dev, KERN_ERR, "failed to re-read IDENTIFY "
"data after HPA resizing\n");
return rc;
}
if (print_info) {
u64 new_sectors = ata_id_n_sectors(dev->id);
ata_dev_printk(dev, KERN_INFO,
"HPA unlocked: %llu -> %llu, native %llu\n",
(unsigned long long)sectors,
(unsigned long long)new_sectors,
(unsigned long long)native_sectors);
}
return 0;
libata: HPA support Signed-off-by: Alan Cox <alan@redhat.com> Add support for ignoring the BIOS HPA result (off by default) and setting the disk to the full available size unless already frozen. Tested with various platforms/disks and confirmed to work with the Macintosh (which broke earlier) and ata_piix (breakage due to the LBA48 readback that Tejun fixed). For normal users this brings us, I believe, to feature parity with old IDE (and of course more featured in some areas too). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-10 17:23:13 -06:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
* ata_dump_id - IDENTIFY DEVICE info debugging output
[PATCH] libata: make ata_dump_id() take @id instead of @dev Make ata_dump_id() take @id instead of @dev. This is preparation for splitting ata_dev_identify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:05 -07:00
* @id: IDENTIFY DEVICE page to dump
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
[PATCH] libata: make ata_dump_id() take @id instead of @dev Make ata_dump_id() take @id instead of @dev. This is preparation for splitting ata_dev_identify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:05 -07:00
* Dump selected 16-bit words from the given IDENTIFY DEVICE
* page.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* LOCKING:
* caller.
*/
[PATCH] libata: make ata_dump_id() take @id instead of @dev Make ata_dump_id() take @id instead of @dev. This is preparation for splitting ata_dev_identify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:05 -07:00
static inline void ata_dump_id(const u16 *id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
DPRINTK("49==0x%04x "
"53==0x%04x "
"63==0x%04x "
"64==0x%04x "
"75==0x%04x \n",
[PATCH] libata: make ata_dump_id() take @id instead of @dev Make ata_dump_id() take @id instead of @dev. This is preparation for splitting ata_dev_identify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:05 -07:00
id[49],
id[53],
id[63],
id[64],
id[75]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DPRINTK("80==0x%04x "
"81==0x%04x "
"82==0x%04x "
"83==0x%04x "
"84==0x%04x \n",
[PATCH] libata: make ata_dump_id() take @id instead of @dev Make ata_dump_id() take @id instead of @dev. This is preparation for splitting ata_dev_identify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:05 -07:00
id[80],
id[81],
id[82],
id[83],
id[84]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
DPRINTK("88==0x%04x "
"93==0x%04x\n",
[PATCH] libata: make ata_dump_id() take @id instead of @dev Make ata_dump_id() take @id instead of @dev. This is preparation for splitting ata_dev_identify(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:05 -07:00
id[88],
id[93]);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
/**
* ata_id_xfermask - Compute xfermask from the given IDENTIFY data
* @id: IDENTIFY data to compute xfer mask from
*
* Compute the xfermask for this device. This is not as trivial
* as it seems if we must consider early devices correctly.
*
* FIXME: pre IDE drive timing (do we care ?).
*
* LOCKING:
* None.
*
* RETURNS:
* Computed xfermask
*/
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
unsigned long ata_id_xfermask(const u16 *id)
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
{
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
unsigned long pio_mask, mwdma_mask, udma_mask;
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
/* Usual case. Word 53 indicates word 64 is valid */
if (id[ATA_ID_FIELD_VALID] & (1 << 1)) {
pio_mask = id[ATA_ID_PIO_MODES] & 0x03;
pio_mask <<= 3;
pio_mask |= 0x7;
} else {
/* If word 64 isn't valid then Word 51 high byte holds
* the PIO timing number for the maximum. Turn it into
* a mask.
*/
ata_if_xfermask() word 51 fix If word 53 bit 1 isn't set, the maximum PIO mode is indicated by the upper 8 bits of word 51, not the lower 8 bits. Fixes PIO mode detection on old Compact Flash cards. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-29 05:28:47 -07:00
u8 mode = (id[ATA_ID_OLD_PIO_MODES] >> 8) & 0xFF;
[PATCH] libata: Don't believe bogus claims in the older PIO mode register Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-29 11:26:47 -06:00
if (mode < 5) /* Valid PIO range */
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
pio_mask = (2 << mode) - 1;
[PATCH] libata: Don't believe bogus claims in the older PIO mode register Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-29 11:26:47 -06:00
else
pio_mask = 1;
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
/* But wait.. there's more. Design your standards by
* committee and you too can get a free iordy field to
* process. However its the speeds not the modes that
* are supported... Note drivers using the timing API
* will get this right anyway
*/
}
mwdma_mask = id[ATA_ID_MWDMA_MODES] & 0x07;
[PATCH] libata: check Word 88 validity in ata_id_xfer_mask() Check bit 2 of Word 53 for Word 88 validity before using Word 88 to determine UDMA mask. Note that the original xfer mask implementation using ata_get_mode_mask() didn't consider bit 2 of Word 53. This patch introduces different (correct) behavior. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 20:34:35 -07:00
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
if (ata_id_is_cfa(id)) {
/*
* Process compact flash extended modes
*/
libata: use ATA_ID_CFA_* Use ATA_ID_CFA_* constants for CFA specific identify data words 162 and 163. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-13 10:50:00 -06:00
int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
if (pio)
pio_mask |= (1 << 5);
if (pio > 1)
pio_mask |= (1 << 6);
if (dma)
mwdma_mask |= (1 << 3);
if (dma > 1)
mwdma_mask |= (1 << 4);
}
[PATCH] libata: check Word 88 validity in ata_id_xfer_mask() Check bit 2 of Word 53 for Word 88 validity before using Word 88 to determine UDMA mask. Note that the original xfer mask implementation using ata_get_mode_mask() didn't consider bit 2 of Word 53. This patch introduces different (correct) behavior. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 20:34:35 -07:00
udma_mask = 0;
if (id[ATA_ID_FIELD_VALID] & (1 << 2))
udma_mask = id[ATA_ID_UDMA_MODES] & 0xff;
[PATCH] libata: add xfer_mask handling functions Add ata_pack_xfermask(), ata_xfer_mask2mode(), ata_xfer_mode2mask(), ata_xfer_mode2shift() and ata_id_xfermask(). These functions will be used by following patches to simplify xfer_mask handling. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
return ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
}
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
/**
libata: make ata_port_queue_task() an internal function ata_port_queue_task() served a single user: ata_pio_task() Rename to ata_pio_queue_task() and un-export it, as nobody outside of libata-core.c uses it. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-12-19 02:25:10 -07:00
* ata_pio_queue_task - Queue port_task
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
* @ap: The ata_port to queue port_task for
WorkStruct: Pass the work_struct pointer instead of context data Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 07:55:48 -07:00
* @data: data for @fn to use
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
* @delay: delay time in msecs for workqueue function
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
*
* Schedule @fn(@data) for execution after @delay jiffies using
* port_task. There is one port_task per port and it's the
* user(low level driver)'s responsibility to make sure that only
* one task is active at any given time.
*
* libata core layer takes care of synchronization between
libata: make ata_port_queue_task() an internal function ata_port_queue_task() served a single user: ata_pio_task() Rename to ata_pio_queue_task() and un-export it, as nobody outside of libata-core.c uses it. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-12-19 02:25:10 -07:00
* port_task and EH. ata_pio_queue_task() may be ignored for EH
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
* synchronization.
*
* LOCKING:
* Inherited from caller.
*/
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
void ata_pio_queue_task(struct ata_port *ap, void *data, unsigned long delay)
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
{
WorkStruct: Pass the work_struct pointer instead of context data Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 07:55:48 -07:00
ap->port_task_data = data;
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
libata-core: convert to use cancel_rearming_delayed_work() We should not use cancel_work_sync(delayed_work->work). This works, but not good. We can use cancel_rearming_delayed_work(), this also simplifies the code. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09 12:46:13 -06:00
/* may fail if ata_port_flush_task() in progress */
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
queue_delayed_work(ata_wq, &ap->port_task, msecs_to_jiffies(delay));
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
}
/**
* ata_port_flush_task - Flush port_task
* @ap: The ata_port to flush port_task for
*
* After this function completes, port_task is guranteed not to
* be running or scheduled.
*
* LOCKING:
* Kernel thread context (may sleep)
*/
void ata_port_flush_task(struct ata_port *ap)
{
DPRINTK("ENTER\n");
libata-core: convert to use cancel_rearming_delayed_work() We should not use cancel_work_sync(delayed_work->work). This works, but not good. We can use cancel_rearming_delayed_work(), this also simplifies the code. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09 12:46:13 -06:00
cancel_rearming_delayed_work(&ap->port_task);
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (ata_msg_ctl(ap))
ata: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-05 19:24:52 -07:00
ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__);
[PATCH] libata: implement port_task Implement port_task. LLDD's can schedule a function to be executed with context after specified delay. libata core takes care of synchronization against EH. This is generalized form of pio_task and packet_task which are tied to PIO hsm implementation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
}
drivers/ata/: make 4 functions static This patch makes the following needlessly global functions static: - libata-core.c: ata_qc_complete_internal() - libata-scsi.c: ata_scsi_qc_new() - libata-scsi.c: ata_dump_status() - libata-scsi.c: ata_to_sense_error() Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-03 16:09:36 -07:00
static void ata_qc_complete_internal(struct ata_queued_cmd *qc)
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
{
[PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
struct completion *waiting = qc->private_data;
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
complete(waiting);
}
/**
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
* ata_exec_internal_sg - execute libata internal command
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
[PATCH] libata: add @cdb to ata_exec_internal() Add @cdb to ata_exec_internal(). It will be used by new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:53 -06:00
* @cdb: CDB for packet command
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
* @dma_dir: Data tranfer direction of the command
libata: fix kernel-doc param name Fix libata kernel-doc parameter name. Warning(linux-2.6.23-git13//drivers/ata/libata-core.c:1415): No description found for parameter 'sgl' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-18 15:12:26 -06:00
* @sgl: sg list for the data buffer of the command
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
* @n_elem: Number of sg entries
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
* @timeout: Timeout in msecs (0 for default)
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
*
* Executes libata internal command with timeout. @tf contains
* command on entry and result on return. Timeout and error
* conditions are reported via return value. No recovery action
* is taken after a command times out. It's caller's duty to
* clean up after timeout.
*
* LOCKING:
* None. Should be called with kernel context, might sleep.
[PATCH] libata: fix comment above ata_exec_internal() Add RETURNS comment above ata_exec_internal() and kill extra blank line. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11 23:09:49 -06:00
*
* RETURNS:
* Zero on success, AC_ERR_* mask on failure
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
*/
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
unsigned ata_exec_internal_sg(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
libata: convert to using sg helpers This converts libata to using the sg helpers for looking up sg elements, instead of doing it manually. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 03:14:12 -06:00
int dma_dir, struct scatterlist *sgl,
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
unsigned int n_elem, unsigned long timeout)
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_link *link = dev->link;
struct ata_port *ap = link->ap;
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
u8 command = tf->command;
libata: improve EH internal command timeout handling ATA_TMOUT_INTERNAL which was 30secs were used for all internal commands which is way too long when something goes wrong. This patch implements command type based stepped timeouts. Different command types can use different timeouts and each command type can use different timeout values after timeouts. ie. the initial timeout is set to a value which should cover most of the cases but not too long so that run away cases don't delay things too much. After the first try times out, the second try can use longer timeout and if that one times out too, it can go for full 30sec timeout. IDENTIFYs use 5s - 10s - 30s timeout and all other commands use 5s - 10s timeouts. This patch significantly cuts down the needed time to handle failure cases while still allowing libata to work with nut job devices through retries. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:54 -06:00
int auto_timeout = 0;
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
struct ata_queued_cmd *qc;
[PATCH] libata-eh-fw: use special reserved tag and qc for internal commands New EH may issue internal commands to recover from error while failed qc's are still hanging around. To allow such usage, reserve tag ATA_MAX_QUEUE-1 for internal command. This also makes it easy to tell whether a qc is for internal command or not. ata_tag_internal() test implements this test. To avoid breaking existing drivers, ata_exec_internal() uses ATA_TAG_INTERNAL only for drivers which implement ->error_handler. For drivers using old EH, tag 0 is used. Note that this makes ata_tag_internal() test valid only when ->error_handler is implemented. This is okay as drivers on old EH should not and does not have any reason to use ata_tag_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:02 -06:00
unsigned int tag, preempted_tag;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
u32 preempted_sactive, preempted_qc_active;
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
int preempted_nr_active_links;
[PATCH] lockdep: annotate on-stack completions lockdep needs to have the waitqueue lock initialized for on-stack waitqueues implicitly initialized by DECLARE_COMPLETION(). Annotate on-stack completions accordingly. Has no effect on non-lockdep kernels. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03 01:25:26 -06:00
DECLARE_COMPLETION_ONSTACK(wait);
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
unsigned long flags;
[PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
unsigned int err_mask;
[PATCH] libata-eh-fw: update ata_exec_internal() for new EH Update ata_exec_internal() such that it uses new EH framework. ->post_internal_cmd() is always invoked regardless of completion status. Also, when ata_exec_internal() detects a timeout condition and new EH is in place, it freezes the port as timeout for normal commands would do. Note that ata_port_flush_task() is called regardless of wait_for_completion status. This is necessary as exceptions unrelated to the qc can abort the qc, in which case PIO task could still be running after the wait for completion returns. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:14 -06:00
int rc;
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_lock_irqsave(ap->lock, flags);
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
[PATCH] libata-eh-fw: implement freeze/thaw Freezing is performed atomic w.r.t. host_set->lock and once frozen LLDD is not allowed to access the port or any qc on it. Also, libata makes sure that no new qc gets issued to a frozen port. A frozen port is thawed after a reset operation completes successfully, so reset methods must do its job while the port is frozen. During initialization all ports get frozen before requesting IRQ, so reset methods are always invoked on a frozen port. Optional ->freeze and ->thaw operations notify LLDD that the port is being frozen and thawed, respectively. LLDD can disable/enable hardware interrupt in these callbacks if the controller's IRQ mask can be changed dynamically. If the controller doesn't allow such operation, LLDD can check for frozen state in the interrupt handler and ack/clear interrupts unconditionally while frozen. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:09 -06:00
/* no internal command while frozen */
[PATCH] libata: add ap->pflags and move core dynamic flags to it ap->flags is way too clamped. Separate out core dynamic flags to ap->pflags. ATA_FLAG_DISABLED is a dynamic flag but left alone as it's referenced by a lot of LLDs and it's gonna be removed once all LLDs are converted to new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-28 10:29:30 -06:00
if (ap->pflags & ATA_PFLAG_FROZEN) {
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_unlock_irqrestore(ap->lock, flags);
[PATCH] libata-eh-fw: implement freeze/thaw Freezing is performed atomic w.r.t. host_set->lock and once frozen LLDD is not allowed to access the port or any qc on it. Also, libata makes sure that no new qc gets issued to a frozen port. A frozen port is thawed after a reset operation completes successfully, so reset methods must do its job while the port is frozen. During initialization all ports get frozen before requesting IRQ, so reset methods are always invoked on a frozen port. Optional ->freeze and ->thaw operations notify LLDD that the port is being frozen and thawed, respectively. LLDD can disable/enable hardware interrupt in these callbacks if the controller's IRQ mask can be changed dynamically. If the controller doesn't allow such operation, LLDD can check for frozen state in the interrupt handler and ack/clear interrupts unconditionally while frozen. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:09 -06:00
return AC_ERR_SYSTEM;
}
[PATCH] libata-eh-fw: use special reserved tag and qc for internal commands New EH may issue internal commands to recover from error while failed qc's are still hanging around. To allow such usage, reserve tag ATA_MAX_QUEUE-1 for internal command. This also makes it easy to tell whether a qc is for internal command or not. ata_tag_internal() test implements this test. To avoid breaking existing drivers, ata_exec_internal() uses ATA_TAG_INTERNAL only for drivers which implement ->error_handler. For drivers using old EH, tag 0 is used. Note that this makes ata_tag_internal() test valid only when ->error_handler is implemented. This is okay as drivers on old EH should not and does not have any reason to use ata_tag_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:02 -06:00
/* initialize internal qc */
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
[PATCH] libata-eh-fw: use special reserved tag and qc for internal commands New EH may issue internal commands to recover from error while failed qc's are still hanging around. To allow such usage, reserve tag ATA_MAX_QUEUE-1 for internal command. This also makes it easy to tell whether a qc is for internal command or not. ata_tag_internal() test implements this test. To avoid breaking existing drivers, ata_exec_internal() uses ATA_TAG_INTERNAL only for drivers which implement ->error_handler. For drivers using old EH, tag 0 is used. Note that this makes ata_tag_internal() test valid only when ->error_handler is implemented. This is okay as drivers on old EH should not and does not have any reason to use ata_tag_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:02 -06:00
/* XXX: Tag 0 is used for drivers with legacy EH as some
* drivers choke if any other tag is given. This breaks
* ata_tag_internal() test for those drivers. Don't use new
* EH stuff without converting to it.
*/
if (ap->ops->error_handler)
tag = ATA_TAG_INTERNAL;
else
tag = 0;
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
if (test_and_set_bit(tag, &ap->qc_allocated))
BUG();
[PATCH] libata-eh-fw: update ata_qc_from_tag() to enforce normal/EH qc ownership New EH framework has clear distinction about who owns a qc. Every qc starts owned by normal execution path - PIO, interrupt or whatever. When an exception condition occurs which affects the qc, the qc gets scheduled for EH. Note that some events (say, link lost and regained, command timeout) may schedule qc's which are not directly related but could have been affected for EH too. Scheduling for EH is atomic w.r.t. ap->host_set->lock and once schedule for EH, normal execution path is not allowed to access the qc in whatever way. (PIO synchronization acts a bit different and will be dealt with later) This patch make ata_qc_from_tag() check whether a qc is active and owned by normal path before returning it. If conditions don't match, NULL is returned and thus access to the qc is denied. __ata_qc_from_tag() is the original ata_qc_from_tag() and is used by libata core/EH layers to access inactive/failed qc's. This change is applied only if the associated LLDD implements new EH as indicated by non-NULL ->error_handler Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:03 -06:00
qc = __ata_qc_from_tag(ap, tag);
[PATCH] libata-eh-fw: use special reserved tag and qc for internal commands New EH may issue internal commands to recover from error while failed qc's are still hanging around. To allow such usage, reserve tag ATA_MAX_QUEUE-1 for internal command. This also makes it easy to tell whether a qc is for internal command or not. ata_tag_internal() test implements this test. To avoid breaking existing drivers, ata_exec_internal() uses ATA_TAG_INTERNAL only for drivers which implement ->error_handler. For drivers using old EH, tag 0 is used. Note that this makes ata_tag_internal() test valid only when ->error_handler is implemented. This is okay as drivers on old EH should not and does not have any reason to use ata_tag_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:02 -06:00
qc->tag = tag;
qc->scsicmd = NULL;
qc->ap = ap;
qc->dev = dev;
ata_qc_reinit(qc);
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
preempted_tag = link->active_tag;
preempted_sactive = link->sactive;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
preempted_qc_active = ap->qc_active;
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
preempted_nr_active_links = ap->nr_active_links;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
link->active_tag = ATA_TAG_POISON;
link->sactive = 0;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
ap->qc_active = 0;
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
ap->nr_active_links = 0;
[PATCH] libata-eh-fw: use special reserved tag and qc for internal commands New EH may issue internal commands to recover from error while failed qc's are still hanging around. To allow such usage, reserve tag ATA_MAX_QUEUE-1 for internal command. This also makes it easy to tell whether a qc is for internal command or not. ata_tag_internal() test implements this test. To avoid breaking existing drivers, ata_exec_internal() uses ATA_TAG_INTERNAL only for drivers which implement ->error_handler. For drivers using old EH, tag 0 is used. Note that this makes ata_tag_internal() test valid only when ->error_handler is implemented. This is okay as drivers on old EH should not and does not have any reason to use ata_tag_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:02 -06:00
/* prepare & issue qc */
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
qc->tf = *tf;
[PATCH] libata: add @cdb to ata_exec_internal() Add @cdb to ata_exec_internal(). It will be used by new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:53 -06:00
if (cdb)
memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
[PATCH] libata: implement qc->result_tf Add qc->result_tf and ATA_QCFLAG_RESULT_TF. This moves the responsibility of loading result TF from post-compltion path to qc execution path. qc->result_tf is loaded if explicitly requested or the qc failsa. This allows more efficient completion implementation and correct handling of result TF for controllers which don't have global TF representation such as sil3124/32. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:40 -06:00
qc->flags |= ATA_QCFLAG_RESULT_TF;
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
qc->dma_dir = dma_dir;
if (dma_dir != DMA_NONE) {
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
unsigned int i, buflen = 0;
libata: convert to using sg helpers This converts libata to using the sg helpers for looking up sg elements, instead of doing it manually. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 03:14:12 -06:00
struct scatterlist *sg;
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
libata: convert to using sg helpers This converts libata to using the sg helpers for looking up sg elements, instead of doing it manually. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 03:14:12 -06:00
for_each_sg(sgl, sg, n_elem, i)
buflen += sg->length;
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
libata: convert to using sg helpers This converts libata to using the sg helpers for looking up sg elements, instead of doing it manually. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 03:14:12 -06:00
ata_sg_init(qc, sgl, n_elem);
libata: Initialize nbytes for internal sg commands Some LLDDs, like ipr, use nbytes and pad_len to determine the total data transfer length of a command. Make sure nbytes gets initialized for internally generated commands. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 10:32:26 -07:00
qc->nbytes = buflen;
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
}
[PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
qc->private_data = &wait;
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
qc->complete_fn = ata_qc_complete_internal;
[PATCH] libata: make ata_qc_issue complete failed qcs There is no reason for the issuer to diddle with a failed qc as the issuer has complete control over when a qc gets freed (usually in ->complete_fn). Make ata_qc_issue() responsible for completing qcs which failed to issue. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 04:41:11 -07:00
ata_qc_issue(qc);
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_unlock_irqrestore(ap->lock, flags);
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
libata: improve EH internal command timeout handling ATA_TMOUT_INTERNAL which was 30secs were used for all internal commands which is way too long when something goes wrong. This patch implements command type based stepped timeouts. Different command types can use different timeouts and each command type can use different timeout values after timeouts. ie. the initial timeout is set to a value which should cover most of the cases but not too long so that run away cases don't delay things too much. After the first try times out, the second try can use longer timeout and if that one times out too, it can go for full 30sec timeout. IDENTIFYs use 5s - 10s - 30s timeout and all other commands use 5s - 10s timeouts. This patch significantly cuts down the needed time to handle failure cases while still allowing libata to work with nut job devices through retries. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:54 -06:00
if (!timeout) {
if (ata_probe_timeout)
timeout = ata_probe_timeout * 1000;
else {
timeout = ata_internal_cmd_timeout(dev, command);
auto_timeout = 1;
}
}
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
rc = wait_for_completion_timeout(&wait, msecs_to_jiffies(timeout));
[PATCH] libata-eh-fw: update ata_exec_internal() for new EH Update ata_exec_internal() such that it uses new EH framework. ->post_internal_cmd() is always invoked regardless of completion status. Also, when ata_exec_internal() detects a timeout condition and new EH is in place, it freezes the port as timeout for normal commands would do. Note that ata_port_flush_task() is called regardless of wait_for_completion status. This is necessary as exceptions unrelated to the qc can abort the qc, in which case PIO task could still be running after the wait for completion returns. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:14 -06:00
ata_port_flush_task(ap);
[PATCH] libata-dev: add flush task to ata_exec_internal() Add ata_port_flush_task() to ata_exec_internal(). Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 20:19:04 -07:00
[PATCH] libata-eh-fw: update ata_exec_internal() for new EH Update ata_exec_internal() such that it uses new EH framework. ->post_internal_cmd() is always invoked regardless of completion status. Also, when ata_exec_internal() detects a timeout condition and new EH is in place, it freezes the port as timeout for normal commands would do. Note that ata_port_flush_task() is called regardless of wait_for_completion status. This is necessary as exceptions unrelated to the qc can abort the qc, in which case PIO task could still be running after the wait for completion returns. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:14 -06:00
if (!rc) {
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_lock_irqsave(ap->lock, flags);
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
/* We're racing with irq here. If we lose, the
* following test prevents us from completing the qc
[PATCH] libata-eh-fw: update ata_exec_internal() for new EH Update ata_exec_internal() such that it uses new EH framework. ->post_internal_cmd() is always invoked regardless of completion status. Also, when ata_exec_internal() detects a timeout condition and new EH is in place, it freezes the port as timeout for normal commands would do. Note that ata_port_flush_task() is called regardless of wait_for_completion status. This is necessary as exceptions unrelated to the qc can abort the qc, in which case PIO task could still be running after the wait for completion returns. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:14 -06:00
* twice. If we win, the port is frozen and will be
* cleaned up by ->post_internal_cmd().
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
*/
[PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
if (qc->flags & ATA_QCFLAG_ACTIVE) {
[PATCH] libata-eh-fw: update ata_exec_internal() for new EH Update ata_exec_internal() such that it uses new EH framework. ->post_internal_cmd() is always invoked regardless of completion status. Also, when ata_exec_internal() detects a timeout condition and new EH is in place, it freezes the port as timeout for normal commands would do. Note that ata_port_flush_task() is called regardless of wait_for_completion status. This is necessary as exceptions unrelated to the qc can abort the qc, in which case PIO task could still be running after the wait for completion returns. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:14 -06:00
qc->err_mask |= AC_ERR_TIMEOUT;
if (ap->ops->error_handler)
ata_port_freeze(ap);
else
ata_qc_complete(qc);
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (ata_msg_warn(ap))
ata_dev_printk(dev, KERN_WARNING,
[PATCH] libata: cosmetic updates Cosmetic updates in libata-core.c. * trim trailing whitespaces * break lines which are over 80 column * kill unnecessary braces * make indentation consistent Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 05:00:35 -06:00
"qc timeout (cmd 0x%x)\n", command);
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
}
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_unlock_irqrestore(ap->lock, flags);
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
}
[PATCH] libata-eh-fw: update ata_exec_internal() for new EH Update ata_exec_internal() such that it uses new EH framework. ->post_internal_cmd() is always invoked regardless of completion status. Also, when ata_exec_internal() detects a timeout condition and new EH is in place, it freezes the port as timeout for normal commands would do. Note that ata_port_flush_task() is called regardless of wait_for_completion status. This is necessary as exceptions unrelated to the qc can abort the qc, in which case PIO task could still be running after the wait for completion returns. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:14 -06:00
/* do post_internal_cmd */
if (ap->ops->post_internal_cmd)
ap->ops->post_internal_cmd(qc);
libata: improve AC_ERR_DEV handling for ->post_internal_cmd ->post_internal_cmd is simplified EH for internal commands. Its primary mission is to stop the controller such that no rogue memory access or other activities occur after the internal command is released. It may provide error diagnostics by setting qc->err_mask but this hasn't been a requirement. To ignore SETXFER failure for CFA devices, libata needs to know whether a command was failed by the device or for any other reason. ie. internal command needs to get AC_ERR_DEV right. This patch makes the following changes to AC_ERR_DEV handling and ->post_internal_cmd semantics to accomodate this need and simplify callback implementation. 1. As long as the correct bits in the result TF registers are set, there is no need to set AC_ERR_DEV explicitly. libata EH core takes care of that for both normal and internal commands. 2. The only requirement for ->post_internal_cmd() is to put the controller into quiescent state. It needs not to set any err_mask. 3. ata_exec_internal_sg() performs minimal error analysis such that AC_ERR_DEV is automatically set as long as result_tf is filled correctly. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-20 00:24:11 -06:00
/* perform minimal error analysis */
if (qc->flags & ATA_QCFLAG_FAILED) {
if (qc->result_tf.command & (ATA_ERR | ATA_DF))
qc->err_mask |= AC_ERR_DEV;
if (!qc->err_mask)
qc->err_mask |= AC_ERR_OTHER;
if (qc->err_mask & ~AC_ERR_OTHER)
qc->err_mask &= ~AC_ERR_OTHER;
[PATCH] libata-eh-fw: update ata_exec_internal() for new EH Update ata_exec_internal() such that it uses new EH framework. ->post_internal_cmd() is always invoked regardless of completion status. Also, when ata_exec_internal() detects a timeout condition and new EH is in place, it freezes the port as timeout for normal commands would do. Note that ata_port_flush_task() is called regardless of wait_for_completion status. This is necessary as exceptions unrelated to the qc can abort the qc, in which case PIO task could still be running after the wait for completion returns. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:14 -06:00
}
[PATCH] libata: hold host_set lock while finishing internal qc Hold host_set lock while finishing internal qc. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:33 -06:00
/* finish up */
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_lock_irqsave(ap->lock, flags);
[PATCH] libata: hold host_set lock while finishing internal qc Hold host_set lock while finishing internal qc. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:33 -06:00
[PATCH] libata: implement qc->result_tf Add qc->result_tf and ATA_QCFLAG_RESULT_TF. This moves the responsibility of loading result TF from post-compltion path to qc execution path. qc->result_tf is loaded if explicitly requested or the qc failsa. This allows more efficient completion implementation and correct handling of result TF for controllers which don't have global TF representation such as sil3124/32. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:40 -06:00
*tf = qc->result_tf;
[PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
err_mask = qc->err_mask;
ata_qc_free(qc);
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
link->active_tag = preempted_tag;
link->sactive = preempted_sactive;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
ap->qc_active = preempted_qc_active;
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
ap->nr_active_links = preempted_nr_active_links;
[PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
[PATCH] libata: check if port is disabled after internal command libata core is being changed to disallow port/device disable on lower layers. However, some LLDDs (sata_mv) directly disable port on command failure. This patch makes ata_exec_internal() check whether a port got disabled after an internal command. If it is, AC_ERR_SYSTEM is added to err_mask and the port gets re-enabled. As internal command failure results in device disable for drivers which don't implement newer reset/EH callbacks, this change results in no behavior change for single device per port controllers. For slave-possible LLDDs which disable port on command failure, (1) such drivers don't exist currently, (2) issuing command to the other device of once-disabled port shouldn't result in catastrophe even if such driver exists. So, this should be enough as a temporary measure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 23:25:30 -07:00
/* XXX - Some LLDDs (sata_mv) disable port on command failure.
* Until those drivers are fixed, we detect the condition
* here, fail the command with AC_ERR_SYSTEM and reenable the
* port.
*
* Note that this doesn't change any behavior as internal
* command failure results in disabling the device in the
* higher layer for LLDDs without new reset/EH callbacks.
*
* Kill the following code as soon as those drivers are fixed.
*/
[PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency. (ATA_FLAG_* are always about ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:52 -06:00
if (ap->flags & ATA_FLAG_DISABLED) {
[PATCH] libata: check if port is disabled after internal command libata core is being changed to disallow port/device disable on lower layers. However, some LLDDs (sata_mv) directly disable port on command failure. This patch makes ata_exec_internal() check whether a port got disabled after an internal command. If it is, AC_ERR_SYSTEM is added to err_mask and the port gets re-enabled. As internal command failure results in device disable for drivers which don't implement newer reset/EH callbacks, this change results in no behavior change for single device per port controllers. For slave-possible LLDDs which disable port on command failure, (1) such drivers don't exist currently, (2) issuing command to the other device of once-disabled port shouldn't result in catastrophe even if such driver exists. So, this should be enough as a temporary measure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 23:25:30 -07:00
err_mask |= AC_ERR_SYSTEM;
ata_port_probe(ap);
}
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_unlock_irqrestore(ap->lock, flags);
[PATCH] libata: hold host_set lock while finishing internal qc Hold host_set lock while finishing internal qc. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:33 -06:00
libata: improve EH internal command timeout handling ATA_TMOUT_INTERNAL which was 30secs were used for all internal commands which is way too long when something goes wrong. This patch implements command type based stepped timeouts. Different command types can use different timeouts and each command type can use different timeout values after timeouts. ie. the initial timeout is set to a value which should cover most of the cases but not too long so that run away cases don't delay things too much. After the first try times out, the second try can use longer timeout and if that one times out too, it can go for full 30sec timeout. IDENTIFYs use 5s - 10s - 30s timeout and all other commands use 5s - 10s timeouts. This patch significantly cuts down the needed time to handle failure cases while still allowing libata to work with nut job devices through retries. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:54 -06:00
if ((err_mask & AC_ERR_TIMEOUT) && auto_timeout)
ata_internal_cmd_timed_out(dev, command);
[PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
return err_mask;
[PATCH] libata: implement ata_exec_internal() This patch implements ata_exec_internal() function which performs libata internal command execution. Previously, this was done by each user by manually initializing a qc, issueing it, waiting for its completion and handling errors. In addition to obvious code factoring, using ata_exec_internal() fixes the following bugs. * qc not freed on issue failure * ap->qactive clearing could race with the next internal command * race between timeout handling and irq * ignoring error condition not represented in tf->status Also, qc & hardware are not accessed anymore once it's completed, making internal commands more conformant with general semantics. ata_exec_internal() also makes it easy to issue internal commands from multiple threads if that becomes necessary. This patch only implements ata_exec_internal(). A following patch will convert all users. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, all patches have been regenerated against upstream branch as of today. (575ab52a218e4ff0667a6cbd972c3af443ee8713) Also, I took out a debug printk from ata_exec_internal (don't know how that one got left there). Other than that, all patches are identical to the previous posting. Thanks. :-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:48:31 -07:00
}
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
/**
[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2) Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 10:15:31 -07:00
* ata_exec_internal - execute libata internal command
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
* @dma_dir: Data tranfer direction of the command
* @buf: Data buffer of the command
* @buflen: Length of data buffer
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
* @timeout: Timeout in msecs (0 for default)
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
*
* Wrapper around ata_exec_internal_sg() which takes simple
* buffer instead of sg list.
*
* LOCKING:
* None. Should be called with kernel context, might sleep.
*
* RETURNS:
* Zero on success, AC_ERR_* mask on failure
*/
unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
int dma_dir, void *buf, unsigned int buflen,
unsigned long timeout)
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
{
[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2) Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 10:15:31 -07:00
struct scatterlist *psg = NULL, sg;
unsigned int n_elem = 0;
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
[PATCH] libata: don't initialize sg in ata_exec_internal() if DMA_NONE (take #2) Calling sg_init_one() with NULL buf causes oops on certain configurations. Don't initialize sg in ata_exec_internal() if DMA_NONE and make the function complain if @buf is NULL when dma_dir isn't DMA_NONE. While at it, fix comment. The problem is discovered and initial patch was submitted by Arnd Bergmann. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-11 10:15:31 -07:00
if (dma_dir != DMA_NONE) {
WARN_ON(!buf);
sg_init_one(&sg, buf, buflen);
psg = &sg;
n_elem++;
}
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
return ata_exec_internal_sg(dev, tf, cdb, dma_dir, psg, n_elem,
timeout);
[PATCH] libata: implement ata_exec_internal_sg() Sg'ify ata_exec_internal() and call it ata_exec_internal_sg(). Wrapper function around ata_exec_internal_sg() is implemented to provide ata_exec_internal() interface. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:09 -07:00
}
[PATCH] libata: update ata_do_simple_cmd() * the function has always returned AC_ERR_* masks not -errno but its return type was int. Make return type unsigned int. * don't print error message automatically. it's the caller's responsibility. * add header comment Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-24 05:30:19 -06:00
/**
* ata_do_simple_cmd - execute simple internal command
* @dev: Device to which the command is sent
* @cmd: Opcode to execute
*
* Execute a 'simple' command, that only consists of the opcode
* 'cmd' itself, without filling any other registers
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* Zero on success, AC_ERR_* mask on failure
[PATCH] libata: move ata_do_simple_cmd() below ata_exec_internal() Move ata_do_simple_cmd() below ata_exec_internal() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-24 05:30:19 -06:00
*/
[PATCH] libata: make two functions global Make ata_do_simple_cmd() and ata_flush_cache() global. These will be used from libata-eh.c. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-24 05:30:19 -06:00
unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
[PATCH] libata: move ata_do_simple_cmd() below ata_exec_internal() Move ata_do_simple_cmd() below ata_exec_internal() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-24 05:30:19 -06:00
{
struct ata_taskfile tf;
ata_tf_init(dev, &tf);
tf.command = cmd;
tf.flags |= ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
return ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
[PATCH] libata: move ata_do_simple_cmd() below ata_exec_internal() Move ata_do_simple_cmd() below ata_exec_internal() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-24 05:30:19 -06:00
}
[PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:18:14 -07:00
/**
* ata_pio_need_iordy - check if iordy needed
* @adev: ATA device
*
* Check if the current speed of the device requires IORDY. Used
* by various controllers for chip configuration.
*/
unsigned int ata_pio_need_iordy(const struct ata_device *adev)
{
libata: don't set IORDY for reset Before issuing reset, libata configures xfermode to PIO0 which makes some drivers turn on IORDY which may cause the controller to lock up if the port is not occupied. IORDY isn't necessary at this point anyway. Make ata_pio_need_iordy() return zero if it's being called for reset. This fixes bko#11703. Reported and tracked down by Daniel Gnoutcheff and Constantine Gavrilov. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Daniel Gnoutcheff <gnoutchd@union.edu> Cc: Constantine Gavrilov <constantine.gavrilov@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-10 20:04:45 -06:00
/* Don't set IORDY if we're preparing for reset. IORDY may
* lead to controller lock up on certain controllers if the
* port is not occupied. See bko#11703 for details.
*/
if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
return 0;
/* Controller doesn't support IORDY. Probably a pointless
* check as the caller should know this.
*/
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
[PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:18:14 -07:00
return 0;
libata: Add special ata_pio_need_iordy() handling for Compact Flash. According to the Compact Flash specification r4.1, PIO modes 5 and 6 do not use iordy. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-10 16:39:12 -07:00
/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6. */
if (ata_id_is_cfa(adev->id)
&& (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6))
return 0;
libata-core: Fix the iordy methods This alone isn't sufficient to save the universe from prehistoric disks and controllers but it is a first important step. Split off a separate function to provide a mode filter when controller iordy is not available. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:22:59 -07:00
/* PIO3 and higher it is mandatory */
if (adev->pio_mode > XFER_PIO_2)
return 1;
/* We turn it on when possible */
if (ata_id_has_iordy(adev->id))
[PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:18:14 -07:00
return 1;
libata-core: Fix the iordy methods This alone isn't sufficient to save the universe from prehistoric disks and controllers but it is a first important step. Split off a separate function to provide a mode filter when controller iordy is not available. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:22:59 -07:00
return 0;
}
[libata] export ata_dev_pair; trim trailing whitespace Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 07:56:57 -07:00
libata-core: Fix the iordy methods This alone isn't sufficient to save the universe from prehistoric disks and controllers but it is a first important step. Split off a separate function to provide a mode filter when controller iordy is not available. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:22:59 -07:00
/**
* ata_pio_mask_no_iordy - Return the non IORDY mask
* @adev: ATA device
*
* Compute the highest mode possible if we are not using iordy. Return
* -1 if no iordy mode is available.
*/
static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
{
[PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:18:14 -07:00
/* If we have no drive specific rule, then PIO 2 is non IORDY */
if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE */
libata-core: Fix the iordy methods This alone isn't sufficient to save the universe from prehistoric disks and controllers but it is a first important step. Split off a separate function to provide a mode filter when controller iordy is not available. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:22:59 -07:00
u16 pio = adev->id[ATA_ID_EIDE_PIO];
[PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:18:14 -07:00
/* Is the speed faster than the drive allows non IORDY ? */
if (pio) {
/* This is cycle times not frequency - watch the logic! */
if (pio > 240) /* PIO2 is 240nS per cycle */
libata-core: Fix the iordy methods This alone isn't sufficient to save the universe from prehistoric disks and controllers but it is a first important step. Split off a separate function to provide a mode filter when controller iordy is not available. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:22:59 -07:00
return 3 << ATA_SHIFT_PIO;
return 7 << ATA_SHIFT_PIO;
[PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:18:14 -07:00
}
}
libata-core: Fix the iordy methods This alone isn't sufficient to save the universe from prehistoric disks and controllers but it is a first important step. Split off a separate function to provide a mode filter when controller iordy is not available. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:22:59 -07:00
return 3 << ATA_SHIFT_PIO;
[PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:18:14 -07:00
}
pata_it821x: Driver updates and reworking - Add support for the RDC 1010 variant - Rework the core library to have a read_id method. This allows the hacky bits of it821x to go and prepares us for pata_hd - Switch from WARN to BUG in ata_id_string as it will reboot if you get it wrong so WARN won't be seen - Allow the issue of command 0xFC on the 821x. This is needed to query rebuild status. - Tidy up printk formatting - Do more ident rewriting on RAID volumes to handle firmware provided ident data which is rather wonky - Report the firmware revision and device layout in RAID mode - Don't try and disable raid on the 8211 or RDC - they don't have the relevant bits Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-24 10:16:06 -06:00
/**
* ata_do_dev_read_id - default ID read method
* @dev: device
* @tf: proposed taskfile
* @id: data buffer
*
* Issue the identify taskfile and hand back the buffer containing
* identify data. For some RAID controllers and for pre ATA devices
* this function is wrapped or replaced by the driver
*/
unsigned int ata_do_dev_read_id(struct ata_device *dev,
struct ata_taskfile *tf, u16 *id)
{
return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS, 0);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
* ata_dev_read_id - Read ID data from the specified device
* @dev: target device
* @p_class: pointer to class of the target device (may be changed)
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
* @flags: ATA_READID_* flags
[PATCH] libata: use preallocated buffers It's not a very good idea to allocate memory during EH. Use statically allocated buffer for dev->id[] and add 512byte buffer ap->sector_buf. This buffer is owned by EH (or probing) and to be used as temporary buffer for various purposes (IDENTIFY, NCQ log page 10h, PM GSCR block). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:35 -06:00
* @id: buffer to read IDENTIFY data into
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
* Read ID data from the specified device. ATA_CMD_ID_ATA is
* performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
[PATCH] libata: kill E.D.D. E.D.D. has no user in-tree and mostly useless. Kill it. For possible out-of-tree users, add a nice warning message and error handling if LLDD doesn't report any useable reset mechanism (and thus tries to use E.D.D.). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24 09:33:34 -07:00
* devices. This function also issues ATA_CMD_INIT_DEV_PARAMS
* for pre-ATA4 drives.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
libata-core: Document some limits/assumptions about ID_ATA Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-08 07:27:00 -06:00
* FIXME: ATA_CMD_ID_ATA is optional for early drives and right
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
* now we abort if we hit that case.
libata-core: Document some limits/assumptions about ID_ATA Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-08 07:27:00 -06:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* LOCKING:
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno otherwise.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
[PATCH] libata-hp-prep: make probing related functions global Hotplug will be implemented in libata-eh.c. Make ata_dev_read_id() and ata_dev_configure() global. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:44 -06:00
int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
unsigned int flags, u16 *id)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_port *ap = dev->link->ap;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
unsigned int class = *p_class;
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
struct ata_taskfile tf;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
unsigned int err_mask = 0;
const char *reason;
libata: handle SEMB signature better WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Haun <drhaun88@gmail.com> Reported-by: Lars Wirzenius <liw@liw.fi> Reported-by: Juan Manuel <jmcarranza@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-14 15:21:10 -06:00
bool is_semb = class == ATA_DEV_SEMB;
libata: fallback to the other IDENTIFY on device error, take#2 It seems the world isn't as frank as we thought and some devices lie about who they are. Fallback to the other IDENTIFY if IDENTIFY is aborted by the device. As this is the strategy used by IDE for a long time, it shouldn't cause too much problem. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: William Thompson <wt@electro-mechanical.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 06:35:29 -06:00
int may_fallback = 1, tried_spinup = 0;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
int rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (ata_msg_ctl(ap))
ata: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-05 19:24:52 -07:00
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
pata_it821x: Driver updates and reworking - Add support for the RDC 1010 variant - Rework the core library to have a read_id method. This allows the hacky bits of it821x to go and prepares us for pata_hd - Switch from WARN to BUG in ata_id_string as it will reboot if you get it wrong so WARN won't be seen - Allow the issue of command 0xFC on the 821x. This is needed to query rebuild status. - Tidy up printk formatting - Do more ident rewriting on RAID volumes to handle firmware provided ident data which is rather wonky - Report the firmware revision and device layout in RAID mode - Don't try and disable raid on the 8211 or RDC - they don't have the relevant bits Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-24 10:16:06 -06:00
retry:
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
ata_tf_init(dev, &tf);
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
switch (class) {
libata: handle SEMB signature better WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Haun <drhaun88@gmail.com> Reported-by: Lars Wirzenius <liw@liw.fi> Reported-by: Juan Manuel <jmcarranza@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-14 15:21:10 -06:00
case ATA_DEV_SEMB:
class = ATA_DEV_ATA; /* some hard drives report SEMB sig */
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
case ATA_DEV_ATA:
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
tf.command = ATA_CMD_ID_ATA;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
break;
case ATA_DEV_ATAPI:
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
tf.command = ATA_CMD_ID_ATAPI;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
break;
default:
rc = -ENODEV;
reason = "unsupported class";
goto err_out;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
tf.protocol = ATA_PROT_PIO;
libata: clear TF before IDENTIFYing Some devices chock if Feature is not clear when IDENTIFY is issued. Set ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE for IDENTIFY such that whole TF is cleared when reading ID data. Kudos to Art Haas for testing various futile patches over several months and Mark Lord for pointing out the fix. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Art Haas <ahaas@airmail.net> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-07 13:37:41 -07:00
/* Some devices choke if TF registers contain garbage. Make
* sure those are properly initialized.
*/
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
/* Device presence detection is unreliable on some
* controllers. Always poll IDENTIFY if available.
*/
tf.flags |= ATA_TFLAG_POLLING;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
pata_it821x: Driver updates and reworking - Add support for the RDC 1010 variant - Rework the core library to have a read_id method. This allows the hacky bits of it821x to go and prepares us for pata_hd - Switch from WARN to BUG in ata_id_string as it will reboot if you get it wrong so WARN won't be seen - Allow the issue of command 0xFC on the 821x. This is needed to query rebuild status. - Tidy up printk formatting - Do more ident rewriting on RAID volumes to handle firmware provided ident data which is rather wonky - Report the firmware revision and device layout in RAID mode - Don't try and disable raid on the 8211 or RDC - they don't have the relevant bits Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-24 10:16:06 -06:00
if (ap->ops->read_id)
err_mask = ap->ops->read_id(dev, &tf, id);
else
err_mask = ata_do_dev_read_id(dev, &tf, id);
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
if (err_mask) {
[PATCH] libata: always use polling IDENTIFY libata switched to IRQ-driven IDENTIFY when IRQ-driven PIO was introduced. This has caused a lot of problems including device misdetection and phantom device. ATA_FLAG_DETECT_POLLING was added recently to selectively use polling IDENTIFY on problemetic drivers but many controllers and devices are affected by this problem and trying to adding ATA_FLAG_DETECT_POLLING for each such case is diffcult and not very rewarding. This patch makes libata always use polling IDENTIFY. This is consistent with libata's original behavior and drivers/ide's behavior. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-03 05:34:13 -07:00
if (err_mask & AC_ERR_NODEV_HINT) {
libata: assume no device is attached if both IDENTIFYs are aborted This is to fix bugzilla #10254. QSI cdrom attached to pata_sis as secondary master appears as phantom device for the slave. Interestingly, instead of not setting DRQ after IDENTIFY which triggers NODEV_HINT, it aborts both IDENTIFY and IDENTIFY PACKET which makes EH retry. Modify EH such that it assumes no device is attached if both flavors of IDENTIFY are aborted by the device. There really isn't much point in retrying when the device actively aborts the commands. While at it, convert NODEV detection message to ata_dev_printk() to help debugging obscure detection problems. This problem was reported by Jan Bücken. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jan Bücken <jb.faq@gmx.de> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-23 00:16:53 -06:00
ata_dev_printk(dev, KERN_DEBUG,
"NODEV after polling detection\n");
[PATCH] libata: implement presence detection via polling IDENTIFY On some controllers (ICHs in piix mode), there is *NO* reliable way to determine device presence other than issuing IDENTIFY and see how the transaction proceeds by watching the TF status register. libata acted this way before irq-pio and phantom devices caused very little problem but now that IDENTIFY is performed using IRQ drive PIO, such phantom devices now result in multiple 30sec timeouts during boot. This patch implements ATA_FLAG_DETECT_POLLING. If a LLD sets this flag, libata core issues the initial IDENTIFY in polling mode and if the initial data transfer fails w/ HSM violation, the port is considered to be empty thus replicating the old libata and IDE behavior. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
return -ENOENT;
}
libata: handle SEMB signature better WDC WD1600JS-62MHB5 successfully hits the window between ATA/ATAPI-7 and Serial ATA II standards and reports 3c/c3 signature which now is assigned to SEMB. Make ata_dev_classify() report ATA_DEV_SEMB on the sig and let ata_dev_read_id() work around it by trying IDENTIFY once. This fixes bko#11579. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: David Haun <drhaun88@gmail.com> Reported-by: Lars Wirzenius <liw@liw.fi> Reported-by: Juan Manuel <jmcarranza@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-14 15:21:10 -06:00
if (is_semb) {
ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on "
"device w/ SEMB sig, disabled\n");
/* SEMB is not supported yet */
*p_class = ATA_DEV_SEMB_UNSUP;
return 0;
}
libata: assume no device is attached if both IDENTIFYs are aborted This is to fix bugzilla #10254. QSI cdrom attached to pata_sis as secondary master appears as phantom device for the slave. Interestingly, instead of not setting DRQ after IDENTIFY which triggers NODEV_HINT, it aborts both IDENTIFY and IDENTIFY PACKET which makes EH retry. Modify EH such that it assumes no device is attached if both flavors of IDENTIFY are aborted by the device. There really isn't much point in retrying when the device actively aborts the commands. While at it, convert NODEV detection message to ata_dev_printk() to help debugging obscure detection problems. This problem was reported by Jan Bücken. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jan Bücken <jb.faq@gmx.de> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-23 00:16:53 -06:00
if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
/* Device or controller might have reported
* the wrong device class. Give a shot at the
* other IDENTIFY if the current one is
* aborted by the device.
*/
if (may_fallback) {
may_fallback = 0;
if (class == ATA_DEV_ATA)
class = ATA_DEV_ATAPI;
else
class = ATA_DEV_ATA;
goto retry;
}
/* Control reaches here iff the device aborted
* both flavors of IDENTIFYs which happens
* sometimes with phantom devices.
*/
ata_dev_printk(dev, KERN_DEBUG,
"both IDENTIFYs aborted, assuming NODEV\n");
return -ENOENT;
libata: fallback to the other IDENTIFY on device error, take#2 It seems the world isn't as frank as we thought and some devices lie about who they are. Fallback to the other IDENTIFY if IDENTIFY is aborted by the device. As this is the strategy used by IDE for a long time, it shouldn't cause too much problem. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: William Thompson <wt@electro-mechanical.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 06:35:29 -06:00
}
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
rc = -EIO;
reason = "I/O error";
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
goto err_out;
}
libata: fallback to the other IDENTIFY on device error, take#2 It seems the world isn't as frank as we thought and some devices lie about who they are. Fallback to the other IDENTIFY if IDENTIFY is aborted by the device. As this is the strategy used by IDE for a long time, it shouldn't cause too much problem. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: William Thompson <wt@electro-mechanical.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-11 06:35:29 -06:00
/* Falling back doesn't make sense if ID data was read
* successfully at least once.
*/
may_fallback = 0;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
swap_buf_le16(id, ATA_ID_WORDS);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
/* sanity check */
[PATCH] libata: ignore CFA signature while sanity-checking an ATAPI device 0x848a in ID word 0 indicates CFA device iff the ID data is obtained from IDENTIFY DEVICE. For ATAPI devices, 0x848a in ID work 0 indicates valid ATAPI device. Fix sanity check in ata_dev_read_id() such that ATAPI devices reporting 0x848a in ID word 0 is not handled as error. The problem is identified by J.A. Magallon with HL-DT-ST DVDRAM GSA-4120B. Signed-off-by: Tejun Helo <htejun@gmail.com> Cc: J.A. Magallon <jamagallon@ono.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-12 21:35:49 -06:00
rc = -EINVAL;
libata: Correct abuse of language The controller is not reporting an unlawful type, it is reporting an invalid type. Illegal specifically means "prohibited by law" Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-07 09:13:55 -06:00
reason = "device reports invalid type";
[PATCH] libata: ignore CFA signature while sanity-checking an ATAPI device 0x848a in ID word 0 indicates CFA device iff the ID data is obtained from IDENTIFY DEVICE. For ATAPI devices, 0x848a in ID work 0 indicates valid ATAPI device. Fix sanity check in ata_dev_read_id() such that ATAPI devices reporting 0x848a in ID word 0 is not handled as error. The problem is identified by J.A. Magallon with HL-DT-ST DVDRAM GSA-4120B. Signed-off-by: Tejun Helo <htejun@gmail.com> Cc: J.A. Magallon <jamagallon@ono.com> Acked-by: Jeff Garzik <jeff@garzik.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-12 21:35:49 -06:00
if (class == ATA_DEV_ATA) {
if (!ata_id_is_ata(id) && !ata_id_is_cfa(id))
goto err_out;
} else {
if (ata_id_is_ata(id))
goto err_out;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
}
libata: Handle drives that require a spin-up command before first access (S)ATA drives can be configured for "power-up in standby", a mode whereby a specific "spin up now!" command is required before the first media access. Currently, a drive with this feature enabled can not be used at all with libata, and once in this mode, the drive becomes a doorstop. The older drivers/ide subsystem at least enumerates the drive, so that it can be woken up after the fact from a userspace HDIO_* command, but not libata. This patch adds support to libata for the "power-up in standby" mode where a "spin up now!" command (SET_FEATURES) is needed. With this, libata will recognize such drives, spin them up, and then re-IDENTIFY them if necessary to get a full/complete set of drive features data. Drives in this state are determined by looking for special values in id[2], as documented in the current ATA specs. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 16:26:07 -06:00
if (!tried_spinup && (id[2] == 0x37c8 || id[2] == 0x738c)) {
tried_spinup = 1;
/*
* Drive powered-up in standby mode, and requires a specific
* SET_FEATURES spin-up subcommand before it will accept
* anything other than the original IDENTIFY command.
*/
[libata] Create internal helper ata_dev_set_feature() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:33:27 -06:00
err_mask = ata_dev_set_feature(dev, SETFEATURES_SPINUP, 0);
libata: adjust libata to ignore errors after spinup Adjust libata to ignore errors after spinup This patch is to ignore errors from the spinup attempt if the drive is in the "standby id" state. Signed-off-by: Ryan Power <rpower@sysreset.com> Acked-by: Mark Lord <liml@rtr.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-10 14:59:35 -06:00
if (err_mask && id[2] != 0x738c) {
libata: Handle drives that require a spin-up command before first access (S)ATA drives can be configured for "power-up in standby", a mode whereby a specific "spin up now!" command is required before the first media access. Currently, a drive with this feature enabled can not be used at all with libata, and once in this mode, the drive becomes a doorstop. The older drivers/ide subsystem at least enumerates the drive, so that it can be woken up after the fact from a userspace HDIO_* command, but not libata. This patch adds support to libata for the "power-up in standby" mode where a "spin up now!" command (SET_FEATURES) is needed. With this, libata will recognize such drives, spin them up, and then re-IDENTIFY them if necessary to get a full/complete set of drive features data. Drives in this state are determined by looking for special values in id[2], as documented in the current ATA specs. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 16:26:07 -06:00
rc = -EIO;
reason = "SPINUP failed";
goto err_out;
}
/*
* If the drive initially returned incomplete IDENTIFY info,
* we now must reissue the IDENTIFY command.
*/
if (id[2] == 0x37c8)
goto retry;
}
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
if ((flags & ATA_READID_POSTRESET) && class == ATA_DEV_ATA) {
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
/*
* The exact sequence expected by certain pre-ATA4 drives is:
* SRST RESET
libata-core: Document some limits/assumptions about ID_ATA Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-08 07:27:00 -06:00
* IDENTIFY (optional in early ATA)
* INITIALIZE DEVICE PARAMETERS (later IDE and ATA)
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
* anything else..
* Some drives were very specific about that exact sequence.
libata-core: Document some limits/assumptions about ID_ATA Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-08 07:27:00 -06:00
*
* Note that ATA4 says lba is mandatory so the second check
* shoud never trigger.
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
*/
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
err_mask = ata_dev_init_params(dev, id[3], id[6]);
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
if (err_mask) {
rc = -EIO;
reason = "INIT_DEV_PARAMS failed";
goto err_out;
}
/* current CHS translation info (id[53-58]) might be
* changed. reread the identify device info.
*/
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
flags &= ~ATA_READID_POSTRESET;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
goto retry;
}
}
*p_class = class;
[PATCH] libata: use preallocated buffers It's not a very good idea to allocate memory during EH. Use statically allocated buffer for dev->id[] and add 512byte buffer ap->sector_buf. This buffer is owned by EH (or probing) and to be used as temporary buffer for various purposes (IDENTIFY, NCQ log page 10h, PM GSCR block). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:35 -06:00
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
return 0;
err_out:
[PATCH] libata: cosmetic updates Cosmetic updates in libata-core.c. * trim trailing whitespaces * break lines which are over 80 column * kill unnecessary braces * make indentation consistent Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 05:00:35 -06:00
if (ata_msg_warn(ap))
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY "
[PATCH] libata: cosmetic updates Cosmetic updates in libata-core.c. * trim trailing whitespaces * break lines which are over 80 column * kill unnecessary braces * make indentation consistent Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 05:00:35 -06:00
"(%s, err_mask=0x%x)\n", reason, err_mask);
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
return rc;
}
libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book 3Gbps is often much more prone to transmission failures. It's usually okay to let EH handle speed down after transmission failures but some WD My Book drives completely shutdown after certain transmission failures and after it only power cycling can revive them. Combined with the fact that external drives often end up with cable assembly which is longer than usual and more likely to have intervening gender, this makes these drives very likely to shutdown under certain configurations virtually rendering them unusable. This patch implements HOARKGE_1_5_GBPS and applies it to WD My Book such that 1.5Gbps is forced once the device is identified. Please take a look at the following bz for related reports. http://bugzilla.kernel.org/show_bug.cgi?id=9913 Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:36 -07:00
static int ata_do_link_spd_horkage(struct ata_device *dev)
{
struct ata_link *plink = ata_dev_phys_link(dev);
u32 target, target_limit;
if (!sata_scr_valid(plink))
return 0;
if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
target = 1;
else
return 0;
target_limit = (1 << target) - 1;
/* if already on stricter limit, no need to push further */
if (plink->sata_spd_limit <= target_limit)
return 0;
plink->sata_spd_limit = target_limit;
/* Request another EH round by returning -EAGAIN if link is
* going faster than the target speed. Forward progress is
* guaranteed by setting sata_spd_limit to target_limit above.
*/
if (plink->sata_spd > target) {
ata_dev_printk(dev, KERN_INFO,
"applying link speed limit horkage to %s\n",
sata_spd_string(target));
return -EAGAIN;
}
return 0;
}
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
static inline u8 ata_dev_knobble(struct ata_device *dev)
[PATCH] libata: fold ata_dev_config() into ata_dev_configure() ata_dev_config() needs to be done everytime a device is configured. Fold it into ata_dev_configure(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:36 -07:00
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_port *ap = dev->link->ap;
libata: add whitelist for devices with known good pata-sata bridges libata currently imposes a UDMA5 max transfer rate and 200 sector max transfer size for SATA devices that sit behind a pata-sata bridge. Lots of devices have known good bridges that don't need this limit applied. The MTRON SSD disks are such devices. Transfer rates are increased by 20-30% with the restriction removed. So add a "blacklist" entry for the MTRON devices, with a flag indicating that the bridge is known good. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27 07:23:18 -06:00
if (ata_dev_blacklisted(dev) & ATA_HORKAGE_BRIDGE_OK)
return 0;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
[PATCH] libata: fold ata_dev_config() into ata_dev_configure() ata_dev_config() needs to be done everytime a device is configured. Fold it into ata_dev_configure(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:36 -07:00
}
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
static int ata_dev_config_ncq(struct ata_device *dev,
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
char *desc, size_t desc_sz)
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_port *ap = dev->link->ap;
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
int hdepth = 0, ddepth = ata_id_queue_depth(dev->id);
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
unsigned int err_mask;
char *aa_desc = "";
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
if (!ata_id_has_ncq(dev->id)) {
desc[0] = '\0';
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
return 0;
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
}
libata: clean up horkage handling Horkage handling had the following problems. * dev->horkage was positioned after ATA_DEVICE_CLEAR_OFFSET, so it was cleared before the device is configured. This broke HORKAGE_DIAGNOSTIC. * Some used dev->horkage while others called ata_device_blacklisted() directly. This was at best confusing. This patch moves dev->horkage right after dev->flags and set the field according to the blacklist during device configuration. All users test against dev->horkage. ata_device_blacklisted() now has only one user, make it static. While at it, rename it to ata_dev_blacklisted() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-04 22:31:27 -06:00
if (dev->horkage & ATA_HORKAGE_NONCQ) {
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
snprintf(desc, desc_sz, "NCQ (not used)");
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
return 0;
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
}
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
if (ap->flags & ATA_FLAG_NCQ) {
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE - 1);
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
dev->flags |= ATA_DFLAG_NCQ;
}
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
if (!(dev->horkage & ATA_HORKAGE_BROKEN_FPDMA_AA) &&
(ap->flags & ATA_FLAG_FPDMA_AA) &&
ata_id_has_fpdma_aa(dev->id)) {
err_mask = ata_dev_set_feature(dev, SETFEATURES_SATA_ENABLE,
SATA_FPDMA_AA);
if (err_mask) {
ata_dev_printk(dev, KERN_ERR, "failed to enable AA"
"(error_mask=0x%x)\n", err_mask);
if (err_mask != AC_ERR_DEV) {
dev->horkage |= ATA_HORKAGE_BROKEN_FPDMA_AA;
return -EIO;
}
} else
aa_desc = ", AA";
}
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
if (hdepth >= ddepth)
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
snprintf(desc, desc_sz, "NCQ (depth %d)%s", ddepth, aa_desc);
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
else
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
snprintf(desc, desc_sz, "NCQ (depth %d/%d)%s", hdepth,
ddepth, aa_desc);
return 0;
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
}
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
/**
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
*
* Configure @dev according to @dev->id. Generic and low-level
* driver specific fixups are also applied.
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
*
* LOCKING:
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno otherwise
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
*/
[PATCH] libata: implement ATA_EHI_PRINTINFO Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 02:38:52 -07:00
int ata_dev_configure(struct ata_device *dev)
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_port *ap = dev->link->ap;
struct ata_eh_context *ehc = &dev->link->eh_context;
libata: reimplement ACPI invocation This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:16 -06:00
int print_info = ehc->i.flags & ATA_EHI_PRINTINFO;
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
const u16 *id = dev->id;
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
unsigned long xfer_mask;
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
char revbuf[7]; /* XYZ-99\0 */
libata: rearrange dmesg info to add full ATA revision Per Jeff's suggestion, this patch rearranges the info printed for ATA drives into dmesg to add the full ATA firmware revision and model information, while keeping the output to 2 lines. Signed-off-by: Eric D. Mudama <edmudama@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 23:00:40 -07:00
char fwrevbuf[ATA_ID_FW_REV_LEN+1];
char modelbuf[ATA_ID_PROD_LEN+1];
[PATCH] libata: Conditionally set host->max_cmd_len In preparation for SAS attached SATA devices, which will not have a libata scsi_host, only setup host->max_cmd_len if ap->host exists. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-28 07:30:31 -06:00
int rc;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (!ata_dev_enabled(dev) && ata_msg_info(ap)) {
libata: s/ap->id/ap->print_id/g ata_port has two different id fields - id and port_no. id is system-wide 1-based unique id for the port while port_no is 0-based host-wide port number. The former is primarily used to identify the ATA port to the user in printk messages while the latter is used in various places in libata core and LLDs to index the port inside the host. The two fields feel quite similar and sometimes ap->id is used in place of ap->port_no, which is very difficult to spot. This patch renames ap->id to ap->print_id to reduce the possibility of such bugs. Some printk messages are adjusted such that id string (ata%u[.%u]) isn't printed twice and/or to use ata_*_printk() instead of hardcoded id format. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20 09:06:51 -07:00
ata_dev_printk(dev, KERN_INFO, "%s: ENTER/EXIT -- nodev\n",
ata: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-05 19:24:52 -07:00
__func__);
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
return 0;
[PATCH] libata: separate out ata_dev_read_id() Separate out ata_dev_read_id() from ata_dev_identify(). This is the first half of splitting ata_dev_identify(). ata_dev_read_id() will also be used for revalidation. This patch does not make any behavior change. ata_dev_read_id() doesn't modify any of libata-internal data structures. It simply reads IDENTIFY page and returns error code on failure. INIT_DEV_PARAMS and EDD wrong class code are also handled by this function. Re-reading IDENTIFY after INIT_DEV_PARAMS is performed by jumping to retry: instead of calling ata_dev_reread_id(). This is done because 1. there's retry label anyway 2. ata_dev_reread_id() cannot be used anywhere else so there's no reason to keep it. This function is probably the place to set transfer mode to PIO0 before IDENTIFY. However, reset -> identify -> init_dev_params order should be kept for pre-ATA4 devices so we cannot set transfer mode before IDENTIFY for them. How do we know if a device is post-ATA4 before IDENTIFY? Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-20 10:12:11 -07:00
}
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (ata_msg_probe(ap))
ata: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-05 19:24:52 -07:00
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: clean up horkage handling Horkage handling had the following problems. * dev->horkage was positioned after ATA_DEVICE_CLEAR_OFFSET, so it was cleared before the device is configured. This broke HORKAGE_DIAGNOSTIC. * Some used dev->horkage while others called ata_device_blacklisted() directly. This was at best confusing. This patch moves dev->horkage right after dev->flags and set the field according to the blacklist during device configuration. All users test against dev->horkage. ata_device_blacklisted() now has only one user, make it static. While at it, rename it to ata_dev_blacklisted() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-04 22:31:27 -06:00
/* set horkage */
dev->horkage |= ata_dev_blacklisted(dev);
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
ata_force_horkage(dev);
libata: clean up horkage handling Horkage handling had the following problems. * dev->horkage was positioned after ATA_DEVICE_CLEAR_OFFSET, so it was cleared before the device is configured. This broke HORKAGE_DIAGNOSTIC. * Some used dev->horkage while others called ata_device_blacklisted() directly. This was at best confusing. This patch moves dev->horkage right after dev->flags and set the field according to the blacklist during device configuration. All users test against dev->horkage. ata_device_blacklisted() now has only one user, make it static. While at it, rename it to ata_dev_blacklisted() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-04 22:31:27 -06:00
libata: ignore SIMG4726 config pseudo device I was hoping ATA_HORKAGE_NODMA | ATA_HORKAGE_SKIP_PM could keep it happy but no even this doesn't work under certain configurations and it's not like we can do anything useful with the cofig device anyway. Replace ATA_HORKAGE_SKIP_PM with ATA_HORKAGE_DISABLE and use it for the config device. This makes the device completely ignored by libata. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 10:15:14 -06:00
if (dev->horkage & ATA_HORKAGE_DISABLE) {
ata_dev_printk(dev, KERN_INFO,
"unsupported device, disabling\n");
ata_dev_disable(dev);
return 0;
}
libata: update atapi disable handling Global and per-LLD ATAPI disable checks were done in the command issue path probably because it was left out during EH conversion. On affected machines, this can cause lots of warning messages. Move them to where they belong - the probing path. Reported by Chunbo Luo. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Chunbo Luo <chunbo.luo@windriver.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 16:52:40 -06:00
if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
dev->class == ATA_DEV_ATAPI) {
ata_dev_printk(dev, KERN_WARNING,
"WARNING: ATAPI is %s, device ignored.\n",
atapi_enabled ? "not supported with this driver"
: "disabled");
ata_dev_disable(dev);
return 0;
}
libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book 3Gbps is often much more prone to transmission failures. It's usually okay to let EH handle speed down after transmission failures but some WD My Book drives completely shutdown after certain transmission failures and after it only power cycling can revive them. Combined with the fact that external drives often end up with cable assembly which is longer than usual and more likely to have intervening gender, this makes these drives very likely to shutdown under certain configurations virtually rendering them unusable. This patch implements HOARKGE_1_5_GBPS and applies it to WD My Book such that 1.5Gbps is forced once the device is identified. Please take a look at the following bz for related reports. http://bugzilla.kernel.org/show_bug.cgi?id=9913 Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:36 -07:00
rc = ata_do_link_spd_horkage(dev);
if (rc)
return rc;
libata: reimplement ACPI invocation This patch reimplements ACPI invocation such that, instead of exporting ACPI details to the rest of libata, ACPI event handlers - ata_acpi_on_resume() and ata_acpi_on_devcfg() - are used. These two functions are responsible for determining whether specific ACPI method is used and when. On resume, _GTF is scheduled by setting ATA_DFLAG_ACPI_PENDING device flag. This is done this way to avoid performing the action on wrong device device (device swapping while suspended). On every ata_dev_configure(), ata_acpi_on_devcfg() is called, which performs _SDD and _GTF. _GTF is performed only after resuming and, if SATA, hardreset as the ACPI spec specifies. As _GTF may contain arbitrary commands, IDENTIFY page is re-read after _GTF taskfiles are executed. If one of ACPI methods fails, ata_acpi_on_devcfg() retries on the first failure. If it fails again on the second try, ACPI is disabled on the device. Note that successful configuration clears ACPI failed status. With all feature checks moved to the above two functions, do_drive_set_taskfiles() is trivial and thus collapsed into ata_acpi_exec_tfs(), which is now static and converted to return the number of executed taskfiles to be used by ata_acpi_on_resume(). As failures are handled properly, ata_acpi_push_id() now returns -errno on errors instead of unconditional zero. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:16 -06:00
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
return rc;
[PATCH] libata: change order of _SDD/_GTF execution (resend #3) Make the sdd call come before gtf. _SDD is used to provide input to the _GTF file, so it should be executed first. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> (cherry picked from 89d74215e1e5b79ea084385b5c83d0e33cf2d655 commit)
2006-11-10 17:14:47 -07:00
libata: remiplement ata_hpa_resize() This patch reimplement ata_hpa_resize() such that... * All HPA related decisions are made inside ata_hpa_resize() proper. ata_hpa_resize() returns 0 if configuration can proceed, -errno if device needs to be reset and reconfigured. * All errors are handled properly. If HPA unlocking isn't requested, HPA handling is disabled automatically to avoid unnecessary device detection failure. * Messages are trimmed. HPA detection message is printed only during initial configuration. HPA unlocked message is printed only during initial configuration or unlocking results in different size. * Instead of using sectors returned in TF of SET_MAX, re-read IDENTIFY data as that's the value the device is going to use. * It's called early during ata_dev_configure() as IDENTIFY data might change after resizing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:32:57 -06:00
/* massage HPA, do it early as it might change IDENTIFY data */
rc = ata_hpa_resize(dev);
if (rc)
return rc;
[PATCH] libata: move IDENTIFY info printing from ata_dev_read_id() to ata_dev_configure() Move IDENTIFY info printing from ata_dev_read_id() to ata_dev_configure() and print only if @print_info is non-zero. This kills duplicate IDENTIFY info printing during probing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:51:19 -07:00
/* print device capabilities */
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (ata_msg_probe(ap))
[PATCH] libata: cosmetic updates Cosmetic updates in libata-core.c. * trim trailing whitespaces * break lines which are over 80 column * kill unnecessary braces * make indentation consistent Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 05:00:35 -06:00
ata_dev_printk(dev, KERN_DEBUG,
"%s: cfg 49:%04x 82:%04x 83:%04x 84:%04x "
"85:%04x 86:%04x 87:%04x 88:%04x\n",
ata: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-05 19:24:52 -07:00
__func__,
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
id[49], id[82], id[83], id[84],
id[85], id[86], id[87], id[88]);
[PATCH] libata: move IDENTIFY info printing from ata_dev_read_id() to ata_dev_configure() Move IDENTIFY info printing from ata_dev_read_id() to ata_dev_configure() and print only if @print_info is non-zero. This kills duplicate IDENTIFY info printing during probing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:51:19 -07:00
[PATCH] libata: re-initialize parameters before configuring In ata_dev_configure(), reinitialize parameters before configuring. This change is for revalidation and hotplug. As ata_dev_configure() can be entered multiple times, parameters need to be reinitialized. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
/* initialize to-be-configured parameters */
[PATCH] libata: clear only affected flags during ata_dev_configure() ata_dev_configure() should not clear dynamic device flags determined elsewhere. Lower eight bits are reserved for feature flags, define ATA_DFLAG_CFG_MASK and clear only those bits before configuring device. Without this patch, ATA_DFLAG_PIO gets turned off during revalidation making PIO mode unuseable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:53 -06:00
dev->flags &= ~ATA_DFLAG_CFG_MASK;
[PATCH] libata: re-initialize parameters before configuring In ata_dev_configure(), reinitialize parameters before configuring. This change is for revalidation and hotplug. As ata_dev_configure() can be entered multiple times, parameters need to be reinitialized. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
dev->max_sectors = 0;
dev->cdb_len = 0;
dev->n_sectors = 0;
dev->cylinders = 0;
dev->heads = 0;
dev->sectors = 0;
[libata] More robust parsing for IDENTIFY DEVICE multi_count field Make libata more robust when parsing the multi_count field from a drive's identify data. This prevents us from attempting to use dubious multi_count values ad infinitum. Reset dev->multi_count to zero and reprobe it each time through this routine, as it can change on device reset. Also ensure that the reported "maximum" value is valid and is a power of two, and that the reported "count" value is valid and also a power of two. And that the "count" value is not greater than the "maximum" value. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-19 11:32:21 -06:00
dev->multi_count = 0;
[PATCH] libata: re-initialize parameters before configuring In ata_dev_configure(), reinitialize parameters before configuring. This change is for revalidation and hotplug. As ata_dev_configure() can be entered multiple times, parameters need to be reinitialized. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
* common ATA, ATAPI feature tests
*/
[PATCH] libata: use ata_id_xfermask() in ata_dev_configure() Replace quick & dirty max transfer mode determination in ata_dev_configure() with ata_id_xfermask(). While at it, rename xfer_modes variable to xfer_mask and make it unsigned int for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:56 -07:00
/* find max transfer mode; for printk only */
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
xfer_mask = ata_id_xfermask(id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (ata_msg_probe(ap))
ata_dump_id(id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: print device model and firmware revision for ATAPI devices For ATA/CFA devices, libata prints out the device model and firmware revision. Do the same for ATAPI devices. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-04 23:01:33 -06:00
/* SCSI only uses 4-char revisions, dump full 8 chars from ATA */
ata_id_c_string(dev->id, fwrevbuf, ATA_ID_FW_REV,
sizeof(fwrevbuf));
ata_id_c_string(dev->id, modelbuf, ATA_ID_PROD,
sizeof(modelbuf));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
if (ata_id_is_cfa(id)) {
libata: use ATA_ID_CFA_* Use ATA_ID_CFA_* constants for CFA specific identify data words 162 and 163. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-13 10:50:00 -06:00
/* CPRM may make this media unusable */
if (id[ATA_ID_CFA_KEY_MGMT] & 1)
libata: s/ap->id/ap->print_id/g ata_port has two different id fields - id and port_no. id is system-wide 1-based unique id for the port while port_no is 0-based host-wide port number. The former is primarily used to identify the ATA port to the user in printk messages while the latter is used in various places in libata core and LLDs to index the port inside the host. The two fields feel quite similar and sometimes ap->id is used in place of ap->port_no, which is very difficult to spot. This patch renames ap->id to ap->print_id to reduce the possibility of such bugs. Some printk messages are adjusted such that id string (ata%u[.%u]) isn't printed twice and/or to use ata_*_printk() instead of hardcoded id format. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20 09:06:51 -07:00
ata_dev_printk(dev, KERN_WARNING,
"supports DRM functions and may "
"not be fully accessable.\n");
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
snprintf(revbuf, 7, "CFA");
libata: Disable ATA8-ACS proposed Trusted Computing features by default Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox <alan@redhat.com>
2007-11-04 20:05:49 -07:00
} else {
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
snprintf(revbuf, 7, "ATA-%d", ata_id_major_version(id));
libata: Disable ATA8-ACS proposed Trusted Computing features by default Historically word 48 in the identify data was used to mean 32bit I/O was supported for VLB IDE etc. ATA8 reassigns this word to the Trusted Computing Group, where it is used for TCG features. This means that an ATA8 TCG drive is going to trigger 32bit I/O on some systems which will be funny. Anyway we need to sort this out ready for ATA8 so: - Reorder the ata.h header a bit so the ata_version function occurs early in it - Make dword_io check the ATA version - Add an ATA8 version checking TCG presence test While we are at it the current drafts have a flaw where it may not be possible to disable TCG features at boot (and opt out of the trusted model) as TCG intends because it relies on presence of a different optional feature (DCS). Handle this in software by refusing the TCG commands if libata.allow_tpm is not set. (We must make it possible as some environments such as proprietary VDR devices will doubtless want to use it to lock up content) Finally as with CPRM print a warning so that the user knows they may not be able to full access and use the device. Signed-off-by: Alan Cox <alan@redhat.com>
2007-11-04 20:05:49 -07:00
/* Warn the user if the device has TPM extensions */
if (ata_id_has_tpm(id))
ata_dev_printk(dev, KERN_WARNING,
"supports DRM functions and may "
"not be fully accessable.\n");
}
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
dev->n_sectors = ata_id_n_sectors(id);
[PATCH] libata: separate out ata_id_n_sectors() Separate out n_sectors calculation into ata_id_n_sectors() from ata_dev_identify(). This will be used by revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 06:47:04 -07:00
[libata] More robust parsing for IDENTIFY DEVICE multi_count field Make libata more robust when parsing the multi_count field from a drive's identify data. This prevents us from attempting to use dubious multi_count values ad infinitum. Reset dev->multi_count to zero and reprobe it each time through this routine, as it can change on device reset. Also ensure that the reported "maximum" value is valid and is a power of two, and that the reported "count" value is valid and also a power of two. And that the "count" value is not greater than the "maximum" value. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-03-19 11:32:21 -06:00
/* get current R/W Multiple count setting */
if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) {
unsigned int max = dev->id[47] & 0xff;
unsigned int cnt = dev->id[59] & 0xff;
/* only recognize/allow powers of two here */
if (is_power_of_2(max) && is_power_of_2(cnt))
if (cnt <= max)
dev->multi_count = cnt;
}
libata: rearrange dmesg info to add full ATA revision Per Jeff's suggestion, this patch rearranges the info printed for ATA drives into dmesg to add the full ATA firmware revision and model information, while keeping the output to 2 lines. Signed-off-by: Eric D. Mudama <edmudama@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 23:00:40 -07:00
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
if (ata_id_has_lba(id)) {
[PATCH] libata: add @print_info argument to ata_dev_configure() Add @print_info argument to ata_dev_configure(). Details of configured device is printed only when @pinfo_info is non-zero. This patch also reorganizes device info printing for LBA case to simplify code (necessary as @print_info adds extra nesting around it). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
const char *lba_desc;
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
char ncq_desc[24];
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
[PATCH] libata: add @print_info argument to ata_dev_configure() Add @print_info argument to ata_dev_configure(). Details of configured device is printed only when @pinfo_info is non-zero. This patch also reorganizes device info printing for LBA case to simplify code (necessary as @print_info adds extra nesting around it). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
lba_desc = "LBA";
dev->flags |= ATA_DFLAG_LBA;
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
if (ata_id_has_lba48(id)) {
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
dev->flags |= ATA_DFLAG_LBA48;
[PATCH] libata: add @print_info argument to ata_dev_configure() Add @print_info argument to ata_dev_configure(). Details of configured device is printed only when @pinfo_info is non-zero. This patch also reorganizes device info printing for LBA case to simplify code (necessary as @print_info adds extra nesting around it). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
lba_desc = "LBA48";
[PATCH] libata: use FLUSH_EXT only when driver is larger than LBA28 limit Many drives support LBA48 even when its capacity is smaller than 1<<28, as LBA48 is required for many functionalities. FLUSH_EXT is mandatory for drives w/ LBA48 support. Interestingly, at least one of such drives (ST960812A) has problems dealing with FLUSH_EXT. It eventually completes the command but takes around 7 seconds to finish in many cases thus drastically slowing down IO transactions. This seems to be a firmware bug which sneaked into production probably because no other ATA driver including linux IDE issues FLUSH_EXT to drives which report support for LBA48 & FLUSH_EXT but is smaller than 1<<28 blocks. This patch adds ATA_DFLAG_FLUSH_EXT which is set iff the drive supports LBA48 & FLUSH_EXT and is larger than LBA28 limit. Both cache flush paths are updated to issue FLUSH_EXT only when the flag is set. Note that the changed behavior is more inline with the rest of libata. libata prefers shorter commands whenever possible. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Danny Kukawka <dkukawka@novell.com> Cc: Stefan Seyfried <seife@novell.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-11 04:10:45 -07:00
if (dev->n_sectors >= (1UL << 28) &&
ata_id_has_flush_ext(id))
dev->flags |= ATA_DFLAG_FLUSH_EXT;
[PATCH] libata: add @print_info argument to ata_dev_configure() Add @print_info argument to ata_dev_configure(). Details of configured device is printed only when @pinfo_info is non-zero. This patch also reorganizes device info printing for LBA case to simplify code (necessary as @print_info adds extra nesting around it). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
}
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
/* config NCQ */
[libata] add DMA setup FIS auto-activate feature Hopefully results in fewer on-the-wire FIS's and no breakage. We'll see! Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-26 19:24:35 -06:00
rc = ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc));
if (rc)
return rc;
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
/* print device info to dmesg */
libata: rearrange dmesg info to add full ATA revision Per Jeff's suggestion, this patch rearranges the info printed for ATA drives into dmesg to add the full ATA firmware revision and model information, while keeping the output to 2 lines. Signed-off-by: Eric D. Mudama <edmudama@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 23:00:40 -07:00
if (ata_msg_drv(ap) && print_info) {
ata_dev_printk(dev, KERN_INFO,
"%s: %s, %s, max %s\n",
revbuf, modelbuf, fwrevbuf,
ata_mode_string(xfer_mask));
ata_dev_printk(dev, KERN_INFO,
"%Lu sectors, multi %u: %s %s\n",
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
(unsigned long long)dev->n_sectors,
libata: rearrange dmesg info to add full ATA revision Per Jeff's suggestion, this patch rearranges the info printed for ATA drives into dmesg to add the full ATA firmware revision and model information, while keeping the output to 2 lines. Signed-off-by: Eric D. Mudama <edmudama@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 23:00:40 -07:00
dev->multi_count, lba_desc, ncq_desc);
}
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
} else {
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
/* CHS */
/* Default translation */
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
dev->cylinders = id[1];
dev->heads = id[3];
dev->sectors = id[6];
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
if (ata_id_current_chs_valid(id)) {
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
/* Current CHS translation is valid. */
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
dev->cylinders = id[54];
dev->heads = id[55];
dev->sectors = id[56];
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
}
/* print device info to dmesg */
libata: rearrange dmesg info to add full ATA revision Per Jeff's suggestion, this patch rearranges the info printed for ATA drives into dmesg to add the full ATA firmware revision and model information, while keeping the output to 2 lines. Signed-off-by: Eric D. Mudama <edmudama@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 23:00:40 -07:00
if (ata_msg_drv(ap) && print_info) {
[PATCH] libata: cosmetic updates Cosmetic updates in libata-core.c. * trim trailing whitespaces * break lines which are over 80 column * kill unnecessary braces * make indentation consistent Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 05:00:35 -06:00
ata_dev_printk(dev, KERN_INFO,
libata: rearrange dmesg info to add full ATA revision Per Jeff's suggestion, this patch rearranges the info printed for ATA drives into dmesg to add the full ATA firmware revision and model information, while keeping the output to 2 lines. Signed-off-by: Eric D. Mudama <edmudama@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 23:00:40 -07:00
"%s: %s, %s, max %s\n",
revbuf, modelbuf, fwrevbuf,
ata_mode_string(xfer_mask));
[libata] Trim trailing whitespace. No code changes. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-26 03:51:33 -07:00
ata_dev_printk(dev, KERN_INFO,
libata: rearrange dmesg info to add full ATA revision Per Jeff's suggestion, this patch rearranges the info printed for ATA drives into dmesg to add the full ATA firmware revision and model information, while keeping the output to 2 lines. Signed-off-by: Eric D. Mudama <edmudama@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-30 23:00:40 -07:00
"%Lu sectors, multi %u, CHS %u/%u/%u\n",
(unsigned long long)dev->n_sectors,
dev->multi_count, dev->cylinders,
dev->heads, dev->sectors);
}
[PATCH] libata irq-pio: add read/write multiple support - add is_multi_taskfile() to ata.h - initialize ata_device->multi_count with device identify data - use ata_pio_sectors() to support r/w multiple commands Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ======== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-01 04:33:20 -07:00
}
[PATCH] libata: move cdb_len for host to device cdb_len is per-device property. Sharing cdb_len on ap results in inaccurate configuration on revalidation and hotplugging. This patch makes cdb_len per-device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 07:32:58 -07:00
dev->cdb_len = 16;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
/* ATAPI-specific feature tests */
[libata] minor fixes, new helpers - in ata_dev_identify(), don't assume that all devices are either ATA or ATAPI. In the future, this code will see port multipliers and other devices. - make a debugging printk less verbose - add new helper ata_qc_reinit() - add new helper BPRINTK() and port flag ATA_FLAG_DEBUGMSG, for fine-grained debugging use.
2005-11-14 12:14:16 -07:00
else if (dev->class == ATA_DEV_ATAPI) {
libata: misc updates for AN Update AN support in preparation of PMP support. * s/ata_id_has_AN/ata_id_has_atapi_AN/ * add AN enabled reporting during configuration * add err_mask to AN configuration failure reporting * update LOCKING comment for ata_scsi_media_change_notify() * check whether ATA dev is attached to SCSI dev ata_scsi_media_change_notify() * set ATA_FLAG_AN in ahci and sata_sil24 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:11 -06:00
const char *cdb_intr_string = "";
const char *atapi_an_string = "";
libata: automatically use DMADIR if drive/bridge requires it Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20 21:25:50 -07:00
const char *dma_dir_string = "";
libata-pmp-prep: implement sata_async_notification() AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:13 -06:00
u32 sntf;
[PATCH] libata-dev: print out information for ATAPI devices with CDB interrupts print out information for ATAPI devices with CDB interrupts Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-30 22:29:04 -07:00
[PATCH] libata: use local *id instead of dev->id in ata_dev_configure() dev->id is used many times in ata_dev_configure(). Use local variable id instead for shorter notation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-13 03:48:04 -07:00
rc = atapi_cdb_len(id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (ata_msg_warn(ap))
[PATCH] libata: cosmetic updates Cosmetic updates in libata-core.c. * trim trailing whitespaces * break lines which are over 80 column * kill unnecessary braces * make indentation consistent Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 05:00:35 -06:00
ata_dev_printk(dev, KERN_WARNING,
"unsupported CDB len\n");
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
rc = -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
goto err_out_nosup;
}
[PATCH] libata: move cdb_len for host to device cdb_len is per-device property. Sharing cdb_len on ap results in inaccurate configuration on revalidation and hotplugging. This patch makes cdb_len per-device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 07:32:58 -07:00
dev->cdb_len = (unsigned int) rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata-pmp-prep: implement sata_async_notification() AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:13 -06:00
/* Enable ATAPI AN if both the host and device have
* the support. If PMP is attached, SNTF is required
* to enable ATAPI AN to discern between PHY status
* changed notifications and ATAPI ANs.
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
*/
libata-pmp-prep: implement sata_async_notification() AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:13 -06:00
if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
libata: implement PMP helpers Implement helpers to test whether PMP is supported, attached and determine pmp number to use when issuing SRST to a link. While at it, move ata_is_host_link() so that it's together with the two new PMP helpers. This change simplifies LLDs and helps making PMP support optional. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:22 -06:00
(!sata_pmp_attached(ap) ||
libata-pmp-prep: implement sata_async_notification() AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:13 -06:00
sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
libata: misc updates for AN Update AN support in preparation of PMP support. * s/ata_id_has_AN/ata_id_has_atapi_AN/ * add AN enabled reporting during configuration * add err_mask to AN configuration failure reporting * update LOCKING comment for ata_scsi_media_change_notify() * check whether ATA dev is attached to SCSI dev ata_scsi_media_change_notify() * set ATA_FLAG_AN in ahci and sata_sil24 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:11 -06:00
unsigned int err_mask;
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
/* issue SET feature command to turn this on */
[libata] Create internal helper ata_dev_set_feature() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:33:27 -06:00
err_mask = ata_dev_set_feature(dev,
SETFEATURES_SATA_ENABLE, SATA_AN);
libata: misc updates for AN Update AN support in preparation of PMP support. * s/ata_id_has_AN/ata_id_has_atapi_AN/ * add AN enabled reporting during configuration * add err_mask to AN configuration failure reporting * update LOCKING comment for ata_scsi_media_change_notify() * check whether ATA dev is attached to SCSI dev ata_scsi_media_change_notify() * set ATA_FLAG_AN in ahci and sata_sil24 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:11 -06:00
if (err_mask)
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
ata_dev_printk(dev, KERN_ERR,
libata: misc updates for AN Update AN support in preparation of PMP support. * s/ata_id_has_AN/ata_id_has_atapi_AN/ * add AN enabled reporting during configuration * add err_mask to AN configuration failure reporting * update LOCKING comment for ata_scsi_media_change_notify() * check whether ATA dev is attached to SCSI dev ata_scsi_media_change_notify() * set ATA_FLAG_AN in ahci and sata_sil24 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:11 -06:00
"failed to enable ATAPI AN "
"(err_mask=0x%x)\n", err_mask);
else {
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
dev->flags |= ATA_DFLAG_AN;
libata: misc updates for AN Update AN support in preparation of PMP support. * s/ata_id_has_AN/ata_id_has_atapi_AN/ * add AN enabled reporting during configuration * add err_mask to AN configuration failure reporting * update LOCKING comment for ata_scsi_media_change_notify() * check whether ATA dev is attached to SCSI dev ata_scsi_media_change_notify() * set ATA_FLAG_AN in ahci and sata_sil24 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:11 -06:00
atapi_an_string = ", ATAPI AN";
}
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
}
[PATCH] libata-dev: print out information for ATAPI devices with CDB interrupts print out information for ATAPI devices with CDB interrupts Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-30 22:29:04 -07:00
if (ata_id_cdb_intr(dev->id)) {
[PATCH] libata: interrupt driven pio for libata-core - add PIO_ST_FIRST for the state before sending ATAPI CDB or sending "ATA PIO data out" first data block. - add ATA_TFLAG_POLLING and ATA_DFLAG_CDB_INTR flags - remove the ATA_FLAG_NOINTR flag since the interrupt handler is now aware of the states - modify ata_pio_sector() and atapi_pio_bytes() to work in the interrupt context - modify the ata_host_intr() to handle PIO interrupts - modify ata_qc_issue_prot() to initialize states - atapi_packet_task() changed to handle "ATA PIO data out" first data block - support the pre-ATA4 ATAPI device which raise interrupt when ready to receive CDB Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 03:38:03 -06:00
dev->flags |= ATA_DFLAG_CDB_INTR;
[PATCH] libata-dev: print out information for ATAPI devices with CDB interrupts print out information for ATAPI devices with CDB interrupts Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-30 22:29:04 -07:00
cdb_intr_string = ", CDB intr";
}
[PATCH] libata: interrupt driven pio for libata-core - add PIO_ST_FIRST for the state before sending ATAPI CDB or sending "ATA PIO data out" first data block. - add ATA_TFLAG_POLLING and ATA_DFLAG_CDB_INTR flags - remove the ATA_FLAG_NOINTR flag since the interrupt handler is now aware of the states - modify ata_pio_sector() and atapi_pio_bytes() to work in the interrupt context - modify the ata_host_intr() to handle PIO interrupts - modify ata_qc_issue_prot() to initialize states - atapi_packet_task() changed to handle "ATA PIO data out" first data block - support the pre-ATA4 ATAPI device which raise interrupt when ready to receive CDB Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-27 03:38:03 -06:00
libata: automatically use DMADIR if drive/bridge requires it Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20 21:25:50 -07:00
if (atapi_dmadir || atapi_id_dmadir(dev->id)) {
dev->flags |= ATA_DFLAG_DMADIR;
dma_dir_string = ", DMADIR";
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* print device info to dmesg */
[PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2 This one looks better, IMHO. This restores the default libata configuration messages printed during booting. Signed-off-by: <petkov@math.uni-muenster.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-27 06:51:25 -06:00
if (ata_msg_drv(ap) && print_info)
libata: print device model and firmware revision for ATAPI devices For ATA/CFA devices, libata prints out the device model and firmware revision. Do the same for ATAPI devices. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-04 23:01:33 -06:00
ata_dev_printk(dev, KERN_INFO,
libata: automatically use DMADIR if drive/bridge requires it Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20 21:25:50 -07:00
"ATAPI: %s, %s, max %s%s%s%s\n",
libata: print device model and firmware revision for ATAPI devices For ATA/CFA devices, libata prints out the device model and firmware revision. Do the same for ATAPI devices. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-04 23:01:33 -06:00
modelbuf, fwrevbuf,
Merge branch 'irq-pio' Conflicts: drivers/scsi/libata-core.c include/linux/libata.h
2006-05-15 05:59:15 -06:00
ata_mode_string(xfer_mask),
libata: automatically use DMADIR if drive/bridge requires it Back in 2.6.17-rc2, a libata module parameter was added for atapi_dmadir. That's nice, but most SATA devices which need it will tell us about it in their IDENTIFY PACKET response, as bit-15 of word-62 of the returned data (as per ATA7, ATA8 specifications). So for those which specify it, we should automatically use the DMADIR bit. Otherwise, disc writing will fail by default on many SATA-ATAPI drives. This patch adds ATA_DFLAG_DMADIR and make ata_dev_configure() set it if atapi_dmadir is set or identify data indicates DMADIR is necessary. atapi_xlat() is converted to check ATA_DFLAG_DMADIR before setting DMADIR. Original patch is from Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-20 21:25:50 -07:00
cdb_intr_string, atapi_an_string,
dma_dir_string);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: move dev->max_sectors configuration into ata_dev_configure() Move dev->max_sectors configuration from ata_scsi_dev_config() to ata_dev_configure(). * more consistent. * allows LLDs to peek at the default dev->max_sectors value. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 02:39:55 -07:00
/* determine max_sectors */
dev->max_sectors = ATA_MAX_SECTORS;
if (dev->flags & ATA_DFLAG_LBA48)
dev->max_sectors = ATA_MAX_SECTORS_LBA48;
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
if (!(dev->horkage & ATA_HORKAGE_IPM)) {
if (ata_id_has_hipm(dev->id))
dev->flags |= ATA_DFLAG_HIPM;
if (ata_id_has_dipm(dev->id))
dev->flags |= ATA_DFLAG_DIPM;
}
libata/pata_it821x: Improve handling of poorly compatible emulations Some it821x RAID firmwares return 0 for the err return off both devices. A similar issue occurs with the slave returning 0 not 1 if you plug a gigabyte sata ramdisk into a controller that fakes two SATA ports as master/slave on an SFF channel. The patch does the following - Allow the 'failed diagnostics' case on both master and slave - Move the HORKAGE_DIAGNOSTIC check after ->dev_config This second change also allows IT821x to fix up a problem where we report drive diagnostic failures when in fact the drive is fine but the microcontroller firmware doesn't appear to get it right. IT821x clears the flag again to avoid giving the user bogus warnings about their disk. The other IT821x change is a bit ugly, we slightly abuse the cable type hook to fiddle with the identify data for the devices. We could add a new hook for this but as we have only one offender and no more seeming likely it seems better to keep libata-core clean. Please let this sit in -mm briefly, just in case the relaxed checking breaks some other emulated interface. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-25 07:21:16 -06:00
/* Limit PATA drive on SATA cable bridge transfers to udma5,
200 sectors */
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
if (ata_dev_knobble(dev)) {
[PATCH] libata-core.c: restore configuration boot messages in ata_dev_configure(), v2 This one looks better, IMHO. This restores the default libata configuration messages printed during booting. Signed-off-by: <petkov@math.uni-muenster.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-27 06:51:25 -06:00
if (ata_msg_drv(ap) && print_info)
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
ata_dev_printk(dev, KERN_INFO,
"applying bridge limits\n");
[PATCH] libata: make per-dev transfer mode limits per-dev Now that each ata_device has xfer masks, per-dev limits can be made per-dev instead of per-port. Make per-dev limits per-dev. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 22:07:50 -07:00
dev->udma_mask &= ATA_UDMA5;
[PATCH] libata: fold ata_dev_config() into ata_dev_configure() ata_dev_config() needs to be done everytime a device is configured. Fold it into ata_dev_configure(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:36 -07:00
dev->max_sectors = ATA_MAX_SECTORS;
}
libata: increase 128 KB / cmd limit for ATAPI tape drives Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are limited in the amount of data that they can transfer by the max_sectors value. The max_sectors value is currently calculated according to the command set for disk drives, which doesn't apply to tape drives. The default max_sectors value of 256 limits ATAPI tape drive commands to 128 KB. This patch against 2.6.24-rc1 increases the max_sectors value for tape drives to 65535, which permits tape drive commands to transfer just under 32 MB. Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V SATA tape drive. Note that some of the chipset drivers also set their own max_sectors value, which may override the value set in libata-core. I don't have any of these chipsets to test, so I didn't go messing with them. Also, ATAPI devices other than tape drives may benefit from similar changes, but I have only tape drives and disk drives to test. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 09:44:35 -06:00
if ((dev->class == ATA_DEV_ATAPI) &&
libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives Per Mark's comments, maybe all ATAPI tape drives need ATA_HORKAGE_STUCK_ERR. This patch applys ATA_HORKAGE_STUCK_ERR for all ATAPI tape drives. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-14 18:35:47 -07:00
(atapi_command_packet_set(id) == TYPE_TAPE)) {
libata: increase 128 KB / cmd limit for ATAPI tape drives Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are limited in the amount of data that they can transfer by the max_sectors value. The max_sectors value is currently calculated according to the command set for disk drives, which doesn't apply to tape drives. The default max_sectors value of 256 limits ATAPI tape drive commands to 128 KB. This patch against 2.6.24-rc1 increases the max_sectors value for tape drives to 65535, which permits tape drive commands to transfer just under 32 MB. Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V SATA tape drive. Note that some of the chipset drivers also set their own max_sectors value, which may override the value set in libata-core. I don't have any of these chipsets to test, so I didn't go messing with them. Also, ATAPI devices other than tape drives may benefit from similar changes, but I have only tape drives and disk drives to test. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 09:44:35 -06:00
dev->max_sectors = ATA_MAX_SECTORS_TAPE;
libata: use ATA_HORKAGE_STUCK_ERR for ATAPI tape drives Per Mark's comments, maybe all ATAPI tape drives need ATA_HORKAGE_STUCK_ERR. This patch applys ATA_HORKAGE_STUCK_ERR for all ATAPI tape drives. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Tejun Heo <htejun@gmail.com>
2007-11-14 18:35:47 -07:00
dev->horkage |= ATA_HORKAGE_STUCK_ERR;
}
libata: increase 128 KB / cmd limit for ATAPI tape drives Commands sent to ATAPI tape drives via the SCSI generic (sg) driver are limited in the amount of data that they can transfer by the max_sectors value. The max_sectors value is currently calculated according to the command set for disk drives, which doesn't apply to tape drives. The default max_sectors value of 256 limits ATAPI tape drive commands to 128 KB. This patch against 2.6.24-rc1 increases the max_sectors value for tape drives to 65535, which permits tape drive commands to transfer just under 32 MB. Tested with a SuperMicro PDSME motherboard, AHCI, and a Sony SDX-570V SATA tape drive. Note that some of the chipset drivers also set their own max_sectors value, which may override the value set in libata-core. I don't have any of these chipsets to test, so I didn't go messing with them. Also, ATAPI devices other than tape drives may benefit from similar changes, but I have only tape drives and disk drives to test. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 09:44:35 -06:00
libata: clean up horkage handling Horkage handling had the following problems. * dev->horkage was positioned after ATA_DEVICE_CLEAR_OFFSET, so it was cleared before the device is configured. This broke HORKAGE_DIAGNOSTIC. * Some used dev->horkage while others called ata_device_blacklisted() directly. This was at best confusing. This patch moves dev->horkage right after dev->flags and set the field according to the blacklist during device configuration. All users test against dev->horkage. ata_device_blacklisted() now has only one user, make it static. While at it, rename it to ata_dev_blacklisted() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-04 22:31:27 -06:00
if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
libata: kill type mismatch compile warning kill the following compile warning. drivers/ata/libata-core.c:1786: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-11 22:38:11 -06:00
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
libata: Limit max sector to 128 for TORiSAN DVD drives (take 3) patch 3/4: The TORiSAN drive locks up when max sector == 256. Limit max sector to 128 for the TORiSAN DRD-N216 drives. (http://bugzilla.kernel.org/show_bug.cgi?id=6710) Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-01 21:34:15 -06:00
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
if (ata_dev_blacklisted(dev) & ATA_HORKAGE_IPM) {
dev->horkage |= ATA_HORKAGE_IPM;
/* reset link pm_policy for this port to no pm */
ap->pm_policy = MAX_PERFORMANCE;
}
[PATCH] libata: fold ata_dev_config() into ata_dev_configure() ata_dev_config() needs to be done everytime a device is configured. Fold it into ata_dev_configure(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:36 -07:00
if (ap->ops->dev_config)
libata: dev_config does not need ap and adev passing It used to be impossible to get from ata_device to ata_port but that is no longer true. Various methods have been cleaned up over time but dev_config still takes both and most users don't need both anyway. Tidy this one up Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01 17:56:15 -07:00
ap->ops->dev_config(dev);
[PATCH] libata: fold ata_dev_config() into ata_dev_configure() ata_dev_config() needs to be done everytime a device is configured. Fold it into ata_dev_configure(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:36 -07:00
libata/pata_it821x: Improve handling of poorly compatible emulations Some it821x RAID firmwares return 0 for the err return off both devices. A similar issue occurs with the slave returning 0 not 1 if you plug a gigabyte sata ramdisk into a controller that fakes two SATA ports as master/slave on an SFF channel. The patch does the following - Allow the 'failed diagnostics' case on both master and slave - Move the HORKAGE_DIAGNOSTIC check after ->dev_config This second change also allows IT821x to fix up a problem where we report drive diagnostic failures when in fact the drive is fine but the microcontroller firmware doesn't appear to get it right. IT821x clears the flag again to avoid giving the user bogus warnings about their disk. The other IT821x change is a bit ugly, we slightly abuse the cable type hook to fiddle with the identify data for the devices. We could add a new hook for this but as we have only one offender and no more seeming likely it seems better to keep libata-core clean. Please let this sit in -mm briefly, just in case the relaxed checking breaks some other emulated interface. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-25 07:21:16 -06:00
if (dev->horkage & ATA_HORKAGE_DIAGNOSTIC) {
/* Let the user know. We don't want to disallow opens for
rescue purposes, or in case the vendor is just a blithering
idiot. Do this after the dev_config call as some controllers
with buggy firmware may want to avoid reporting false device
bugs */
if (print_info) {
ata_dev_printk(dev, KERN_WARNING,
"Drive reports diagnostics failure. This may indicate a drive\n");
ata_dev_printk(dev, KERN_WARNING,
"fault or invalid emulation. Contact drive vendor for information.\n");
}
}
libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-26 21:36:48 -07:00
if ((dev->horkage & ATA_HORKAGE_FIRMWARE_WARN) && print_info) {
ata_dev_printk(dev, KERN_WARNING, "WARNING: device requires "
"firmware update to be fully functional.\n");
ata_dev_printk(dev, KERN_WARNING, " contact the vendor "
"or visit http://ata.wiki.kernel.org.\n");
}
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
err_out_nosup:
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
if (ata_msg_probe(ap))
[PATCH] libata: cosmetic updates Cosmetic updates in libata-core.c. * trim trailing whitespaces * break lines which are over 80 column * kill unnecessary braces * make indentation consistent Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 05:00:35 -06:00
ata_dev_printk(dev, KERN_DEBUG,
ata: replace remaining __FUNCTION__ occurrences __FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-05 19:24:52 -07:00
"%s: EXIT, err\n", __func__);
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
/**
libata-core: fix comments on cable type Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:19:19 -07:00
* ata_cable_40wire - return 40 wire cable type
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
* @ap: port
*
libata-core: fix comments on cable type Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:19:19 -07:00
* Helper method for drivers which want to hardwire 40 wire cable
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
* detection.
*/
int ata_cable_40wire(struct ata_port *ap)
{
return ATA_CBL_PATA40;
}
/**
libata-core: fix comments on cable type Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:19:19 -07:00
* ata_cable_80wire - return 80 wire cable type
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
* @ap: port
*
libata-core: fix comments on cable type Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 16:19:19 -07:00
* Helper method for drivers which want to hardwire 80 wire cable
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
* detection.
*/
int ata_cable_80wire(struct ata_port *ap)
{
return ATA_CBL_PATA80;
}
/**
* ata_cable_unknown - return unknown PATA cable.
* @ap: port
*
* Helper method for drivers which have no PATA cable detection.
*/
int ata_cable_unknown(struct ata_port *ap)
{
return ATA_CBL_PATA_UNK;
}
libata: add ATA_CBL_PATA_IGN ATA_CBL_PATA_UNK indicates that the cable type can't be determined from the host side and might be either 80c or 40c. libata applies drive or other generic limit in this case. However, there are controllers where both host and drive side detections are misimplemented and the driver has to rely solely on private method - peeking BIOS or ACPI configuration or using some other private mechanism. This patch adds ATA_CBL_PATA_IGN which tells libata to ignore the cable type completely and just let the LLD determine the transfer mode via host transfer mode masks and ->mode_filter(). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:48 -07:00
/**
* ata_cable_ignore - return ignored PATA cable.
* @ap: port
*
* Helper method for drivers which don't use cable type to limit
* transfer mode.
*/
int ata_cable_ignore(struct ata_port *ap)
{
return ATA_CBL_PATA_IGN;
}
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
/**
* ata_cable_sata - return SATA cable type
* @ap: port
*
* Helper method for drivers which have SATA cables
*/
int ata_cable_sata(struct ata_port *ap)
{
return ATA_CBL_SATA;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
* ata_bus_probe - Reset and probe ATA bus
* @ap: Bus to probe
*
libata: doc updates
2005-05-30 17:49:12 -06:00
* Master ATA bus probing function. Initiates a hardware-dependent
* bus reset, then attempts to identify any devices found on
* the bus.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* LOCKING:
libata: doc updates
2005-05-30 17:49:12 -06:00
* PCI/etc. bus probe sem.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* RETURNS:
[PATCH] libata: make ata_bus_probe() return negative errno on failure ata_bus_probe() uses unsigned int rc to receive negative errno and returns the converted unsigned int value. Convert temporary variables to int and make ata_bus_probe() return negative errno on failure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:17 -07:00
* Zero on success, negative errno otherwise.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
[PATCH] libata: Add support for SATA attachment to SAS adapters The following patch enhances libata to allow SAS device drivers to utilize libata to talk to SATA devices. It introduces some new APIs which allow libata to be used without allocating a virtual scsi host. New APIs: ata_sas_port_alloc - Allocate an ata_port ata_sas_port_init - Initialize an ata_port (probe device, etc) ata_sas_port_destroy - Free an ata_port allocated by ata_sas_port_alloc ata_sas_slave_configure - configure scsi device ata_sas_queuecmd - queue a scsi command, similar to ata_scsi_queuecomand These new APIs can be used either directly by a SAS LLDD or could be used by the SAS transport class. Possible usage for a SAS LLDD would be: scsi_scan_host target_alloc ata_sas_port_alloc slave_alloc ata_sas_port_init slave_configure ata_sas_slave_configure Commands received by the LLDD for SATA devices would call ata_sas_queuecmd. Device teardown would occur with: slave_destroy port_disable target_destroy ata_sas_port_destroy Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-07 13:27:31 -06:00
int ata_bus_probe(struct ata_port *ap)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
[PATCH] libata: reorganize ata_bus_probe() Now that reset and configure are converted such that they don't modify or disable libata core data structures, reorganize ata_bus_probe() to reflect this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:36 -07:00
unsigned int classes[ATA_MAX_DEVICES];
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
int tries[ATA_MAX_DEVICES];
libata-link: implement and use link/device iterators Multiple links and different number of devices per link should be considered to iterate over links and devices. This patch implements and uses link and device iterators - ata_port_for_each_link() and ata_link_for_each_dev() - and ata_link_max_devices(). This change makes a lot of functions iterate over only possible devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such changes have been examined and nothing should be broken. While at it, add a separating comment before device helpers to distinguish them better from link helpers and others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int rc;
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
struct ata_device *dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: reorganize ata_bus_probe() Now that reset and configure are converted such that they don't modify or disable libata core data structures, reorganize ata_bus_probe() to reflect this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:36 -07:00
ata_port_probe(ap);
[PATCH] libata: new ->probe_reset operation Add new ->probe_reset operation to ata_port_operations obsoleting ->phy_reset. The main difference from ->phy_reset is that the new operation is not allowed to manipulate libata internals directly. It's not allowed to configure or disable the port or devices. It can only succeed or fail and classify attached devices into passed @classes. This change gives more control to higher level and eases sharing reset methods with EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, &ap->link, ALL)
libata-link: implement and use link/device iterators Multiple links and different number of devices per link should be considered to iterate over links and devices. This patch implements and uses link and device iterators - ata_port_for_each_link() and ata_link_for_each_dev() - and ata_link_max_devices(). This change makes a lot of functions iterate over only possible devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such changes have been examined and nothing should be broken. While at it, add a separating comment before device helpers to distinguish them better from link helpers and others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
tries[dev->devno] = ATA_PROBE_MAX_TRIES;
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
retry:
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, &ap->link, ALL) {
libata: relocate forcing PIO0 on reset Forcing PIO0 on reset was done inside ata_bus_softreset(), which is a bit out of place as it should be applied to all resets - hard, soft and implementation which don't use ata_bus_softreset(). Relocate it such that... * For new EH, it's done in ata_eh_reset() before calling prereset. * For old EH, it's done before calling ap->ops->phy_reset() in ata_bus_probe(). This makes PIO0 forced after all resets. Another difference is that reset itself is done after PIO0 is forced. Signed-off-by: Tejun Heo <htejun@gmail.com> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-29 01:41:09 -06:00
/* If we issue an SRST then an ATA drive (not ATAPI)
* may change configuration and be in PIO0 timing. If
* we do a hard reset (or are coming from power on)
* this is true for ATA or ATAPI. Until we've set a
* suitable controller mode we should not touch the
* bus as we may be talking too fast.
*/
dev->pio_mode = XFER_PIO_0;
/* If the controller has a pio mode setup function
* then use it to set the chipset to rights. Don't
* touch the DMA setup as that will be dealt with when
* configuring devices.
*/
if (ap->ops->set_piomode)
ap->ops->set_piomode(ap, dev);
}
[PATCH] libata: fix class handling in ata_bus_probe() ata_bus_probe() didn't set classes[] properly for port disabled case of ->phy_reset() compatibility path. This patch moves classes[] initialization and normalization out of ->probe_reset block such that it applies to both ->probe_reset and ->phy_reset paths. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-12 09:57:01 -07:00
/* reset and determine device classes */
[PATCH] libata-hp: killl ops->probe_reset Now that all drivers implementing new EH are converted to new probing mechanism, ops->probe_reset doesn't have any user. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:22 -06:00
ap->ops->phy_reset(ap);
[PATCH] libata: fix missing classes[] initialization in ata_bus_probe() ata_bus_probe() didn't initialize classes[] properly with ATA_DEV_UNKNOWN. As ->probe_reset() is allowed to leave @classes alone when no device is present, this results in garbage class values. ATM, the only affected driver is ata_piix. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11 08:57:39 -07:00
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, &ap->link, ALL) {
[PATCH] libata-hp: killl ops->probe_reset Now that all drivers implementing new EH are converted to new probing mechanism, ops->probe_reset doesn't have any user. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:22 -06:00
if (!(ap->flags & ATA_FLAG_DISABLED) &&
dev->class != ATA_DEV_UNKNOWN)
classes[dev->devno] = dev->class;
else
classes[dev->devno] = ATA_DEV_NONE;
[PATCH] libata: fix class handling in ata_bus_probe() ata_bus_probe() didn't set classes[] properly for port disabled case of ->phy_reset() compatibility path. This patch moves classes[] initialization and normalization out of ->probe_reset block such that it applies to both ->probe_reset and ->phy_reset paths. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-12 09:57:01 -07:00
[PATCH] libata-hp: killl ops->probe_reset Now that all drivers implementing new EH are converted to new probing mechanism, ops->probe_reset doesn't have any user. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:22 -06:00
dev->class = ATA_DEV_UNKNOWN;
[PATCH] libata: reorganize ata_bus_probe() Now that reset and configure are converted such that they don't modify or disable libata core data structures, reorganize ata_bus_probe() to reflect this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:36 -07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata-hp: killl ops->probe_reset Now that all drivers implementing new EH are converted to new probing mechanism, ops->probe_reset doesn't have any user. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:22 -06:00
ata_port_probe(ap);
[PATCH] libata: fix class handling in ata_bus_probe() ata_bus_probe() didn't set classes[] properly for port disabled case of ->phy_reset() compatibility path. This patch moves classes[] initialization and normalization out of ->probe_reset block such that it applies to both ->probe_reset and ->phy_reset paths. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-12 09:57:01 -07:00
[libata] change master/slave IDENTIFY order 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the needed changes. The basic requirement is that we have to identify the slave before the master. The patch switches the identify order so that we can do the drive side detection correctly. [NOTE: patch and description extracted from a larger work written and signed-off-by Alan Cox] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 15:47:28 -07:00
/* read IDENTIFY page and configure devices. We have to do the identify
specific sequence bass-ackwards so that PDIAG- is released by
the slave device */
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, &ap->link, ALL_REVERSE) {
libata-link: implement and use link/device iterators Multiple links and different number of devices per link should be considered to iterate over links and devices. This patch implements and uses link and device iterators - ata_port_for_each_link() and ata_link_for_each_dev() - and ata_link_max_devices(). This change makes a lot of functions iterate over only possible devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such changes have been examined and nothing should be broken. While at it, add a separating comment before device helpers to distinguish them better from link helpers and others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (tries[dev->devno])
dev->class = classes[dev->devno];
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
if (!ata_dev_enabled(dev))
[PATCH] libata: separate out ata_dev_configure() Separate out ata_dev_configure() from ata_dev_identify() such that ata_dev_configure() only configures @dev according to passed in @id. The function now does not disable device on failure, it just returns appropirate error code. As this change leaves ata_dev_identify() with only reading ID, calling configure and disabling devices according to the results, this patch also kills ata_dev_identify() and inlines the logic into ata_bus_probe(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01 00:09:35 -07:00
continue;
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET,
dev->id);
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
if (rc)
goto fail;
[libata] change master/slave IDENTIFY order 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the needed changes. The basic requirement is that we have to identify the slave before the master. The patch switches the identify order so that we can do the drive side detection correctly. [NOTE: patch and description extracted from a larger work written and signed-off-by Alan Cox] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 15:47:28 -07:00
}
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
/* Now ask for the cable type as PDIAG- should have been released */
if (ap->ops->cable_detect)
ap->cbl = ap->ops->cable_detect(ap);
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
/* We may have SATA bridge glue hiding here irrespective of
* the reported cable types and sensed types. When SATA
* drives indicate we have a bridge, we don't know which end
* of the link the bridge is which is a problem.
*/
ata_for_each_dev(dev, &ap->link, ENABLED)
libata: Spot bridge chips If we have a PATA cable with a SATA drive on it then we've found a bridge and we can flip the cable type. This fixes some cable detect problems with SATA bridges on chipsets and misdetected cable types. In theory cable detection and mode limiting is needed if you put a SATA/PATA bridge on a 40 wire cable, but I see no way to deal with that other than to point out its not a good idea anyway. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-22 16:22:45 -06:00
if (ata_id_is_sata(dev->id))
ap->cbl = ATA_CBL_SATA;
[libata] change master/slave IDENTIFY order 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the needed changes. The basic requirement is that we have to identify the slave before the master. The patch switches the identify order so that we can do the drive side detection correctly. [NOTE: patch and description extracted from a larger work written and signed-off-by Alan Cox] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 15:47:28 -07:00
/* After the identify sequence we can now set up the devices. We do
this in the normal order so that the user doesn't get confused */
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, &ap->link, ENABLED) {
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO;
[PATCH] libata: implement ATA_EHI_PRINTINFO Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 02:38:52 -07:00
rc = ata_dev_configure(dev);
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO;
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
if (rc)
goto fail;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
/* configure transfer mode */
libata-link: linkify config/EH related functions Make the following functions deal with ata_link instead of ata_port. * ata_set_mode() * ata_eh_autopsy() and related functions * ata_eh_report() and related functions * suspend/resume related functions * ata_eh_recover() and related functions Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
rc = ata_set_mode(&ap->link, &dev);
libata: improve probe failure handling * Move forcing device to PIO0 on device disable into ata_dev_disable(). This makes both old and new EHs act the same way. * Speed down only PIO mode on probe failure. All commands used during probing are PIO commands. There's no point in speeding down DMA. * Retry at least once after -ENODEV. Some devices report garbled IDENTIFY data after certain events. This shouldn't cause device detach and re-attach. * Rearrange EH failure path for simplicity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
if (rc)
[PATCH] libata: cosmetic update to ata_bus_probe() Move ata_set_mode() failure handling outside of ap->ops->set_mode if clause such that it can handle ap->ops->set_mode failures after it's updated. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:26:29 -06:00
goto fail;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, &ap->link, ENABLED)
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
/* no device present, disable port */
ata_port_disable(ap);
[PATCH] libata: make ata_bus_probe() return negative errno on failure ata_bus_probe() uses unsigned int rc to receive negative errno and returns the converted unsigned int value. Convert temporary variables to int and make ata_bus_probe() return negative errno on failure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:17 -07:00
return -ENODEV;
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
fail:
libata: improve probe failure handling * Move forcing device to PIO0 on device disable into ata_dev_disable(). This makes both old and new EHs act the same way. * Speed down only PIO mode on probe failure. All commands used during probing are PIO commands. There's no point in speeding down DMA. * Retry at least once after -ENODEV. Some devices report garbled IDENTIFY data after certain events. This shouldn't cause device detach and re-attach. * Rearrange EH failure path for simplicity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
tries[dev->devno]--;
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
switch (rc) {
case -EINVAL:
libata: improve probe failure handling * Move forcing device to PIO0 on device disable into ata_dev_disable(). This makes both old and new EHs act the same way. * Speed down only PIO mode on probe failure. All commands used during probing are PIO commands. There's no point in speeding down DMA. * Retry at least once after -ENODEV. Some devices report garbled IDENTIFY data after certain events. This shouldn't cause device detach and re-attach. * Rearrange EH failure path for simplicity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
/* eeek, something went very wrong, give up */
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
tries[dev->devno] = 0;
break;
libata: improve probe failure handling * Move forcing device to PIO0 on device disable into ata_dev_disable(). This makes both old and new EHs act the same way. * Speed down only PIO mode on probe failure. All commands used during probing are PIO commands. There's no point in speeding down DMA. * Retry at least once after -ENODEV. Some devices report garbled IDENTIFY data after certain events. This shouldn't cause device detach and re-attach. * Rearrange EH failure path for simplicity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
case -ENODEV:
/* give it just one more chance */
tries[dev->devno] = min(tries[dev->devno], 1);
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
case -EIO:
libata: improve probe failure handling * Move forcing device to PIO0 on device disable into ata_dev_disable(). This makes both old and new EHs act the same way. * Speed down only PIO mode on probe failure. All commands used during probing are PIO commands. There's no point in speeding down DMA. * Retry at least once after -ENODEV. Some devices report garbled IDENTIFY data after certain events. This shouldn't cause device detach and re-attach. * Rearrange EH failure path for simplicity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
if (tries[dev->devno] == 1) {
/* This is the last chance, better to slow
* down than lose it.
*/
libata: add @spd_limit to sata_down_spd_limit() Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:33 -07:00
sata_down_spd_limit(&ap->link, 0);
libata: improve probe failure handling * Move forcing device to PIO0 on device disable into ata_dev_disable(). This makes both old and new EHs act the same way. * Speed down only PIO mode on probe failure. All commands used during probing are PIO commands. There's no point in speeding down DMA. * Retry at least once after -ENODEV. Some devices report garbled IDENTIFY data after certain events. This shouldn't cause device detach and re-attach. * Rearrange EH failure path for simplicity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
}
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
}
libata: improve probe failure handling * Move forcing device to PIO0 on device disable into ata_dev_disable(). This makes both old and new EHs act the same way. * Speed down only PIO mode on probe failure. All commands used during probing are PIO commands. There's no point in speeding down DMA. * Retry at least once after -ENODEV. Some devices report garbled IDENTIFY data after certain events. This shouldn't cause device detach and re-attach. * Rearrange EH failure path for simplicity. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
if (!tries[dev->devno])
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
ata_dev_disable(dev);
[PATCH] libata: disable failed devices only once in ata_bus_probe() Devices which consumed all their changes used to be disabled every iteration. This causes unnecessary noise in the console output. Disable once and leave alone. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:26:29 -06:00
[PATCH] libata: improve ata_bus_probe() Improve ata_bus_probe() such that configuration failures are handled better. Each device is given ATA_PROBE_MAX_TRIES chances, but any non-transient error (revalidation failure with -ENODEV, configuration failure with -EINVAL...) disables the device directly. Any IO error results in SATA PHY speed down and ata_set_mode() failure lowers transfer mode. The last try always puts a device into PIO-0. After each failure, the whole port is reset to make sure that the controller and all the devices are in a known and stable state. The reset also applies SATA SPD configuration if necessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
goto retry;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
/**
libata: doc updates
2005-05-30 17:49:12 -06:00
* ata_port_probe - Mark port as enabled
* @ap: Port for which we indicate enablement
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
libata: doc updates
2005-05-30 17:49:12 -06:00
* Modify @ap data structure such that the system
* thinks that the entire port is enabled.
*
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* LOCKING: host lock, or some other form of
libata: doc updates
2005-05-30 17:49:12 -06:00
* serialization.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
void ata_port_probe(struct ata_port *ap)
{
[PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency. (ATA_FLAG_* are always about ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:52 -06:00
ap->flags &= ~ATA_FLAG_DISABLED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
/**
* sata_print_link_status - Print SATA link status
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: SATA link to printk link status about
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
*
* This function prints link speed and status of a SATA link.
*
* LOCKING:
* None.
*/
make sata_print_link_status() static sata_print_link_status() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-21 02:51:11 -06:00
static void sata_print_link_status(struct ata_link *link)
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
{
[PATCH] libata: print SControl in SATA link status info message Now that libata mangles with SControl, it's helpful to print out SControl in link status message. Add it. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 09:09:41 -06:00
u32 sstatus, scontrol, tmp;
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (sata_scr_read(link, SCR_STATUS, &sstatus))
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
return;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
sata_scr_read(link, SCR_CONTROL, &scontrol);
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
if (ata_phys_link_online(link)) {
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
tmp = (sstatus >> 4) & 0xf;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
ata_link_printk(link, KERN_INFO,
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
"SATA link up %s (SStatus %X SControl %X)\n",
sata_spd_string(tmp), sstatus, scontrol);
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
} else {
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
ata_link_printk(link, KERN_INFO,
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
"SATA link down (SStatus %X SControl %X)\n",
sstatus, scontrol);
[PATCH] libata: separate out ata_sata_print_link_status Separate out sata_print_link_status() from __sata_phy_reset(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-19 06:35:02 -07:00
}
}
[PATCH] libata: add ata_dev_pair helper Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 08:38:34 -07:00
/**
* ata_dev_pair - return other device on cable
* @adev: device
*
* Obtain the other device on the same cable, or if none is
* present NULL is returned
*/
[libata] export ata_dev_pair; trim trailing whitespace Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 07:56:57 -07:00
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
struct ata_device *ata_dev_pair(struct ata_device *adev)
[PATCH] libata: add ata_dev_pair helper Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 08:38:34 -07:00
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_link *link = adev->link;
struct ata_device *pair = &link->device[1 - adev->devno];
[PATCH] libata: implement ata_dev_enabled and disabled() This patch renames ata_dev_present() to ata_dev_enabled() and adds ata_dev_disabled(). This is to discern the state where a device is present but disabled from not-present state. This disctinction is necessary when configuring transfer mode because device selection timing must not be violated even if a device fails to configure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
if (!ata_dev_enabled(pair))
[PATCH] libata: add ata_dev_pair helper Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 08:38:34 -07:00
return NULL;
return pair;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
libata: more doc updates Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c.
2005-05-30 13:41:05 -06:00
* ata_port_disable - Disable port.
* @ap: Port to be disabled.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
libata: more doc updates Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c.
2005-05-30 13:41:05 -06:00
* Modify @ap data structure such that the system
* thinks that the entire port is disabled, and should
* never attempt to probe or communicate with devices
* on this port.
*
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* LOCKING: host lock, or some other form of
libata: more doc updates Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c.
2005-05-30 13:41:05 -06:00
* serialization.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
void ata_port_disable(struct ata_port *ap)
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
ap->link.device[0].class = ATA_DEV_NONE;
ap->link.device[1].class = ATA_DEV_NONE;
[PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency. (ATA_FLAG_* are always about ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:52 -06:00
ap->flags |= ATA_FLAG_DISABLED;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
/**
[PATCH] libata: rename ata_down_sata_spd_limit() and friends Rename ata_down_sata_spd_limit() and friends to sata_down_spd_limit() and likewise for simplicity & consistency. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:23 -06:00
* sata_down_spd_limit - adjust SATA spd limit downward
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: Link to adjust SATA spd limit for
libata: add @spd_limit to sata_down_spd_limit() Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:33 -07:00
* @spd_limit: Additional limit
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Adjust SATA spd limit of @link downward. Note that this
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
* function only adjusts the limit. The change must be applied
[PATCH] libata: rename ata_down_sata_spd_limit() and friends Rename ata_down_sata_spd_limit() and friends to sata_down_spd_limit() and likewise for simplicity & consistency. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:23 -06:00
* using sata_set_spd().
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
*
libata: add @spd_limit to sata_down_spd_limit() Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:33 -07:00
* If @spd_limit is non-zero, the speed is limited to equal to or
* lower than @spd_limit if such speed is supported. If
* @spd_limit is slower than any supported speed, only the lowest
* supported speed is allowed.
*
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* 0 on success, negative errno on failure
*/
libata: add @spd_limit to sata_down_spd_limit() Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:33 -07:00
int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
{
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
u32 sstatus, spd, mask;
libata: add @spd_limit to sata_down_spd_limit() Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:33 -07:00
int rc, bit;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (!sata_scr_valid(link))
libata: improve SATA PHY speed down logic sata_down_spd_limit() first reads the current SPD from SStatus and limit the speed to the lower one of one below the current limit or one below the current SPD in SStatus. SPD may not be accessible or valid when SPD down is requested making sata_down_spd_limit() fail when it's most needed. This patch makes the current SPD cached after each successful reset and forces GEN I speed (1.5Gbps) if neither of SStatus or the cached value is valid, so sata_down_spd_limit() is now guaranteed to lower the speed limit if lower speed is available. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:40 -06:00
return -EOPNOTSUPP;
/* If SCR can be read, use it to determine the current SPD.
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* If not, use cached value in link->sata_spd.
libata: improve SATA PHY speed down logic sata_down_spd_limit() first reads the current SPD from SStatus and limit the speed to the lower one of one below the current limit or one below the current SPD in SStatus. SPD may not be accessible or valid when SPD down is requested making sata_down_spd_limit() fail when it's most needed. This patch makes the current SPD cached after each successful reset and forces GEN I speed (1.5Gbps) if neither of SStatus or the cached value is valid, so sata_down_spd_limit() is now guaranteed to lower the speed limit if lower speed is available. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:40 -06:00
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
rc = sata_scr_read(link, SCR_STATUS, &sstatus);
libata: check onlineness before using SPD in sata_down_spd_limit() sata_down_spd_limit() should check whether the link is online before using the SPD value to determine how to limit the link speed. Factor out onlineness test and test it from sata_down_spd_limit(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:31 -07:00
if (rc == 0 && ata_sstatus_online(sstatus))
libata: improve SATA PHY speed down logic sata_down_spd_limit() first reads the current SPD from SStatus and limit the speed to the lower one of one below the current limit or one below the current SPD in SStatus. SPD may not be accessible or valid when SPD down is requested making sata_down_spd_limit() fail when it's most needed. This patch makes the current SPD cached after each successful reset and forces GEN I speed (1.5Gbps) if neither of SStatus or the cached value is valid, so sata_down_spd_limit() is now guaranteed to lower the speed limit if lower speed is available. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:40 -06:00
spd = (sstatus >> 4) & 0xf;
else
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
spd = link->sata_spd;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
mask = link->sata_spd_limit;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
if (mask <= 1)
return -EINVAL;
libata: improve SATA PHY speed down logic sata_down_spd_limit() first reads the current SPD from SStatus and limit the speed to the lower one of one below the current limit or one below the current SPD in SStatus. SPD may not be accessible or valid when SPD down is requested making sata_down_spd_limit() fail when it's most needed. This patch makes the current SPD cached after each successful reset and forces GEN I speed (1.5Gbps) if neither of SStatus or the cached value is valid, so sata_down_spd_limit() is now guaranteed to lower the speed limit if lower speed is available. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:40 -06:00
/* unconditionally mask off the highest bit */
libata: add @spd_limit to sata_down_spd_limit() Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:33 -07:00
bit = fls(mask) - 1;
mask &= ~(1 << bit);
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata: improve SATA PHY speed down logic sata_down_spd_limit() first reads the current SPD from SStatus and limit the speed to the lower one of one below the current limit or one below the current SPD in SStatus. SPD may not be accessible or valid when SPD down is requested making sata_down_spd_limit() fail when it's most needed. This patch makes the current SPD cached after each successful reset and forces GEN I speed (1.5Gbps) if neither of SStatus or the cached value is valid, so sata_down_spd_limit() is now guaranteed to lower the speed limit if lower speed is available. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:40 -06:00
/* Mask off all speeds higher than or equal to the current
* one. Force 1.5Gbps if current SPD is not available.
*/
if (spd > 1)
mask &= (1 << (spd - 1)) - 1;
else
mask &= 1;
/* were we already at the bottom? */
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
if (!mask)
return -EINVAL;
libata: add @spd_limit to sata_down_spd_limit() Add @spd_limit to sata_down_spd_limit() so that the caller can specify the SPD limit it wants. This parameter doesn't get in the way even when it's too low. The closest possible limit is applied. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:33 -07:00
if (spd_limit) {
if (mask & ((1 << spd_limit) - 1))
mask &= (1 << spd_limit) - 1;
else {
bit = ffs(mask) - 1;
mask = 1 << bit;
}
}
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
link->sata_spd_limit = mask;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
sata_spd_string(fls(mask)));
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
return 0;
}
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
static int __sata_set_spd_needed(struct ata_link *link, u32 *scontrol)
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
{
libata: don't configure downstream links faster than the upstream link There's nothing to be gained by configuring downstream links faster than the upstream link and such configurations cause problems on certain PMPs. Limit downstream link speed by the upstream link speed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 19:17:07 -06:00
struct ata_link *host_link = &link->ap->link;
u32 limit, target, spd;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata: don't configure downstream links faster than the upstream link There's nothing to be gained by configuring downstream links faster than the upstream link and such configurations cause problems on certain PMPs. Limit downstream link speed by the upstream link speed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 19:17:07 -06:00
limit = link->sata_spd_limit;
/* Don't configure downstream link faster than upstream link.
* It doesn't speed up anything and some PMPs choke on such
* configuration.
*/
if (!ata_is_host_link(link) && host_link->sata_spd)
limit &= (1 << host_link->sata_spd) - 1;
if (limit == UINT_MAX)
target = 0;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
else
libata: don't configure downstream links faster than the upstream link There's nothing to be gained by configuring downstream links faster than the upstream link and such configurations cause problems on certain PMPs. Limit downstream link speed by the upstream link speed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 19:17:07 -06:00
target = fls(limit);
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
spd = (*scontrol >> 4) & 0xf;
libata: don't configure downstream links faster than the upstream link There's nothing to be gained by configuring downstream links faster than the upstream link and such configurations cause problems on certain PMPs. Limit downstream link speed by the upstream link speed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 19:17:07 -06:00
*scontrol = (*scontrol & ~0xf0) | ((target & 0xf) << 4);
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata: don't configure downstream links faster than the upstream link There's nothing to be gained by configuring downstream links faster than the upstream link and such configurations cause problems on certain PMPs. Limit downstream link speed by the upstream link speed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 19:17:07 -06:00
return spd != target;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
}
/**
[PATCH] libata: rename ata_down_sata_spd_limit() and friends Rename ata_down_sata_spd_limit() and friends to sata_down_spd_limit() and likewise for simplicity & consistency. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:23 -06:00
* sata_set_spd_needed - is SATA spd configuration needed
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: Link in question
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
*
* Test whether the spd limit in SControl matches
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link->sata_spd_limit. This function is used to determine
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
* whether hardreset is necessary to apply SATA spd
* configuration.
*
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* 1 if SATA spd configuration is needed, 0 otherwise.
*/
make sata_set_spd_needed() static sata_set_spd_needed() can now become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-21 02:51:17 -06:00
static int sata_set_spd_needed(struct ata_link *link)
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
{
u32 scontrol;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (sata_scr_read(link, SCR_CONTROL, &scontrol))
libata: request PHY speed configuration on SControl access failure In sata_set_spd_needed(), if SControl read failed, it returned 0 and skipped PHY speed configuration. However, if SControl access fails, it's far more logical to request PHY speed configuration. Reverse the logic. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-30 19:17:06 -06:00
return 1;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
return __sata_set_spd_needed(link, &scontrol);
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
}
/**
[PATCH] libata: rename ata_down_sata_spd_limit() and friends Rename ata_down_sata_spd_limit() and friends to sata_down_spd_limit() and likewise for simplicity & consistency. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:23 -06:00
* sata_set_spd - set SATA spd according to spd limit
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: Link to set SATA spd for
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Set SATA spd of @link according to sata_spd_limit.
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
*
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* 0 if spd doesn't need to be changed, 1 if spd has been
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
* changed. Negative errno if SCR registers are inaccessible.
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int sata_set_spd(struct ata_link *link)
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
{
u32 scontrol;
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
int rc;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
return rc;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (!__sata_set_spd_needed(link, &scontrol))
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
return 0;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
return rc;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
return 1;
}
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
/*
* This mode timing computation functionality is ported over from
* drivers/ide/ide-timing.h and was originally written by Vojtech Pavlik
*/
/*
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
* PIO 0-4, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds).
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
* These were taken from ATA/ATAPI-6 standard, rev 0a, except
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
* for UDMA6, which is currently supported only by Maxtor drives.
*
* For PIO 5/6 MWDMA 3/4 see the CFA specification 3.0.
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
*/
static const struct ata_timing ata_timing[] = {
libata: Add another column to the ata_timing table. The forthcoming OCTEON SOC Compact Flash driver needs an additional timing value that was not available in the ata_timing table. I add a new column for dmack_hold time. The values were obtained from the Compact Flash specification Rev 4.1. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-15 18:45:31 -07:00
/* { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 0, 960, 0 }, */
{ XFER_PIO_0, 70, 290, 240, 600, 165, 150, 0, 600, 0 },
{ XFER_PIO_1, 50, 290, 93, 383, 125, 100, 0, 383, 0 },
{ XFER_PIO_2, 30, 290, 40, 330, 100, 90, 0, 240, 0 },
{ XFER_PIO_3, 30, 80, 70, 180, 80, 70, 0, 180, 0 },
{ XFER_PIO_4, 25, 70, 25, 120, 70, 25, 0, 120, 0 },
{ XFER_PIO_5, 15, 65, 25, 100, 65, 25, 0, 100, 0 },
{ XFER_PIO_6, 10, 55, 20, 80, 55, 20, 0, 80, 0 },
{ XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 50, 960, 0 },
{ XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 30, 480, 0 },
{ XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 20, 240, 0 },
{ XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 20, 480, 0 },
{ XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 5, 150, 0 },
{ XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 5, 120, 0 },
{ XFER_MW_DMA_3, 25, 0, 0, 0, 65, 25, 5, 100, 0 },
{ XFER_MW_DMA_4, 25, 0, 0, 0, 55, 20, 5, 80, 0 },
/* { XFER_UDMA_SLOW, 0, 0, 0, 0, 0, 0, 0, 0, 150 }, */
{ XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 0, 120 },
{ XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 0, 80 },
{ XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 0, 60 },
{ XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 0, 45 },
{ XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 0, 30 },
{ XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 0, 20 },
{ XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 0, 15 },
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
{ 0xFF }
};
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
#define ENOUGH(v, unit) (((v)-1)/(unit)+1)
#define EZ(v, unit) ((v)?ENOUGH(v, unit):0)
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
static void ata_timing_quantize(const struct ata_timing *t, struct ata_timing *q, int T, int UT)
{
libata: Add another column to the ata_timing table. The forthcoming OCTEON SOC Compact Flash driver needs an additional timing value that was not available in the ata_timing table. I add a new column for dmack_hold time. The values were obtained from the Compact Flash specification Rev 4.1. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-15 18:45:31 -07:00
q->setup = EZ(t->setup * 1000, T);
q->act8b = EZ(t->act8b * 1000, T);
q->rec8b = EZ(t->rec8b * 1000, T);
q->cyc8b = EZ(t->cyc8b * 1000, T);
q->active = EZ(t->active * 1000, T);
q->recover = EZ(t->recover * 1000, T);
q->dmack_hold = EZ(t->dmack_hold * 1000, T);
q->cycle = EZ(t->cycle * 1000, T);
q->udma = EZ(t->udma * 1000, UT);
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
}
void ata_timing_merge(const struct ata_timing *a, const struct ata_timing *b,
struct ata_timing *m, unsigned int what)
{
if (what & ATA_TIMING_SETUP ) m->setup = max(a->setup, b->setup);
if (what & ATA_TIMING_ACT8B ) m->act8b = max(a->act8b, b->act8b);
if (what & ATA_TIMING_REC8B ) m->rec8b = max(a->rec8b, b->rec8b);
if (what & ATA_TIMING_CYC8B ) m->cyc8b = max(a->cyc8b, b->cyc8b);
if (what & ATA_TIMING_ACTIVE ) m->active = max(a->active, b->active);
if (what & ATA_TIMING_RECOVER) m->recover = max(a->recover, b->recover);
libata: Add another column to the ata_timing table. The forthcoming OCTEON SOC Compact Flash driver needs an additional timing value that was not available in the ata_timing table. I add a new column for dmack_hold time. The values were obtained from the Compact Flash specification Rev 4.1. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-15 18:45:31 -07:00
if (what & ATA_TIMING_DMACK_HOLD) m->dmack_hold = max(a->dmack_hold, b->dmack_hold);
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
if (what & ATA_TIMING_CYCLE ) m->cycle = max(a->cycle, b->cycle);
if (what & ATA_TIMING_UDMA ) m->udma = max(a->udma, b->udma);
}
libata: export xfermode / PATA timing related functions Export the following xfermode related functions. * ata_pack_xfermask() * ata_unpack_xfermask() * ata_xfer_mask2mode() * ata_xfer_mode2mask() * ata_xfer_mode2shift() * ata_mode_string() * ata_id_xfermask() * ata_timing_find_mode() These functions will be used later by LLD updates. While at it, change unsigned short @speed to u8 @xfer_mode in ata_timing_find_mode() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:39 -07:00
const struct ata_timing *ata_timing_find_mode(u8 xfer_mode)
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
{
libata: clean up xfermode / PATA timing related stuff * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:40 -07:00
const struct ata_timing *t = ata_timing;
while (xfer_mode > t->mode)
t++;
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
libata: clean up xfermode / PATA timing related stuff * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:40 -07:00
if (xfer_mode == t->mode)
return t;
return NULL;
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
}
int ata_timing_compute(struct ata_device *adev, unsigned short speed,
struct ata_timing *t, int T, int UT)
{
const struct ata_timing *s;
struct ata_timing p;
/*
[libata] export ata_dev_pair; trim trailing whitespace Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 07:56:57 -07:00
* Find the mode.
[PATCH] libata: honor the transfer cycle time speficied by the EIDE device The following code segment is not functional because the transfer cycle time speficied by the EIDE device is later overwritten by ata_timing_quantize(): /* * If the drive is an EIDE drive, it can tell us it needs extended * PIO/MW_DMA cycle timing. */ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); (snip) ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); <== uninitialized "t" is used here } /* * Convert the timing to bus clock counts. */ ata_timing_quantize(s, t, T, UT); <== t is overwritten by quantized s The patch has been submitted for ide-timing.h before: http://marc.theaimsgroup.com/?l=linux-ide&m=110820013425454&w=2 Resubmitted for libata. Changes: - Minor fix to honor the following transfer cycle time speficied by the device - id[65]: Minimum Multiword DMA transfer cycle time per word - id[67]: Minimum PIO transfer cycle time without flow control - id[68]: Minimum PIO transfer cycle time with IORDY Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ======= Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-16 02:06:18 -07:00
*/
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
if (!(s = ata_timing_find_mode(speed)))
return -EINVAL;
[PATCH] libata: honor the transfer cycle time speficied by the EIDE device The following code segment is not functional because the transfer cycle time speficied by the EIDE device is later overwritten by ata_timing_quantize(): /* * If the drive is an EIDE drive, it can tell us it needs extended * PIO/MW_DMA cycle timing. */ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); (snip) ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); <== uninitialized "t" is used here } /* * Convert the timing to bus clock counts. */ ata_timing_quantize(s, t, T, UT); <== t is overwritten by quantized s The patch has been submitted for ide-timing.h before: http://marc.theaimsgroup.com/?l=linux-ide&m=110820013425454&w=2 Resubmitted for libata. Changes: - Minor fix to honor the following transfer cycle time speficied by the device - id[65]: Minimum Multiword DMA transfer cycle time per word - id[67]: Minimum PIO transfer cycle time without flow control - id[68]: Minimum PIO transfer cycle time with IORDY Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ======= Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-16 02:06:18 -07:00
memcpy(t, s, sizeof(*s));
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
/*
* If the drive is an EIDE drive, it can tell us it needs extended
* PIO/MW_DMA cycle timing.
*/
if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */
memset(&p, 0, sizeof(p));
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
if (speed >= XFER_PIO_0 && speed <= XFER_SW_DMA_0) {
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
if (speed <= XFER_PIO_2) p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO];
else p.cycle = p.cyc8b = adev->id[ATA_ID_EIDE_PIO_IORDY];
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
} else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) {
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
p.cycle = adev->id[ATA_ID_EIDE_DMA_MIN];
}
ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B);
}
/*
* Convert the timing to bus clock counts.
*/
[PATCH] libata: honor the transfer cycle time speficied by the EIDE device The following code segment is not functional because the transfer cycle time speficied by the EIDE device is later overwritten by ata_timing_quantize(): /* * If the drive is an EIDE drive, it can tell us it needs extended * PIO/MW_DMA cycle timing. */ if (adev->id[ATA_ID_FIELD_VALID] & 2) { /* EIDE drive */ memset(&p, 0, sizeof(p)); (snip) ata_timing_merge(&p, t, t, ATA_TIMING_CYCLE | ATA_TIMING_CYC8B); <== uninitialized "t" is used here } /* * Convert the timing to bus clock counts. */ ata_timing_quantize(s, t, T, UT); <== t is overwritten by quantized s The patch has been submitted for ide-timing.h before: http://marc.theaimsgroup.com/?l=linux-ide&m=110820013425454&w=2 Resubmitted for libata. Changes: - Minor fix to honor the following transfer cycle time speficied by the device - id[65]: Minimum Multiword DMA transfer cycle time per word - id[67]: Minimum PIO transfer cycle time without flow control - id[68]: Minimum PIO transfer cycle time with IORDY Signed-off-by: Albert Lee <albertcc@tw.ibm.com> ======= Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-16 02:06:18 -07:00
ata_timing_quantize(t, t, T, UT);
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
/*
Various libata documentation updates. This is a merger of libata docs + cleanups from Martin Waitz <tali@admingilde.org> and me. From: Randy Dunlap <rdunlap@xenotime.net> From: Martin Waitz <tali@admingilde.org> Fix libata kernel-doc comments to match code. Add some function parameters to kernel-doc. Fix some typos/spellos. Put comments in <= 80 columns. Make one DPRINTK string unique. Fix sparse cast warnings. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-28 11:15:32 -07:00
* Even in DMA/UDMA modes we still use PIO access for IDENTIFY,
* S.M.A.R.T * and some other commands. We have to ensure that the
* DMA cycle timing is slower/equal than the fastest PIO timing.
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
*/
[PATCH] libata: Incorrect timing computation for PIO5/6 The ata timing computation code makes some mistakes in PIO5/6 because a check was not updated correctly when I put this support into the kernel. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-07 05:41:18 -07:00
if (speed > XFER_PIO_6) {
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
ata_timing_compute(adev, adev->pio_mode, &p, T, UT);
ata_timing_merge(&p, t, t, ATA_TIMING_ALL);
}
/*
Various libata documentation updates. This is a merger of libata docs + cleanups from Martin Waitz <tali@admingilde.org> and me. From: Randy Dunlap <rdunlap@xenotime.net> From: Martin Waitz <tali@admingilde.org> Fix libata kernel-doc comments to match code. Add some function parameters to kernel-doc. Fix some typos/spellos. Put comments in <= 80 columns. Make one DPRINTK string unique. Fix sparse cast warnings. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-28 11:15:32 -07:00
* Lengthen active & recovery time so that cycle time is correct.
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
*/
if (t->act8b + t->rec8b < t->cyc8b) {
t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2;
t->rec8b = t->cyc8b - t->act8b;
}
if (t->active + t->recover < t->cycle) {
t->active += (t->cycle - (t->active + t->recover)) / 2;
t->recover = t->cycle - t->active;
}
libata: Trim trailing whitespace Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21 18:14:23 -06:00
ata_timing: ensure t->cycle is always correct Russell King hit a case where quantisation errors accumulated such that the cycle time was shorter than rather than equal to the active/recovery time. The code already knows how to stretch times to fit the cycle time but does not know about the reverse. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-23 04:55:36 -06:00
/* In a few cases quantisation may produce enough errors to
leave t->cycle too low for the sum of active and recovery
if so we must correct this */
if (t->active + t->recover > t->cycle)
t->cycle = t->active + t->recover;
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
return 0;
}
libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi libata-acpi is using separate timing tables for transfer modes although libata-core has the complete ata_timing table. Implement ata_timing_cycle2mode() to look for matching mode given transfer type and cycle duration and use it in libata-acpi and pata_acpi to replace private timing tables. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-18 00:33:05 -07:00
/**
* ata_timing_cycle2mode - find xfer mode for the specified cycle duration
* @xfer_shift: ATA_SHIFT_* value for transfer type to examine.
* @cycle: cycle duration in ns
*
* Return matching xfer mode for @cycle. The returned mode is of
* the transfer type specified by @xfer_shift. If @cycle is too
* slow for @xfer_shift, 0xff is returned. If @cycle is faster
* than the fastest known mode, the fasted mode is returned.
*
* LOCKING:
* None.
*
* RETURNS:
* Matching xfer_mode, 0xff if no match found.
*/
u8 ata_timing_cycle2mode(unsigned int xfer_shift, int cycle)
{
u8 base_mode = 0xff, last_mode = 0xff;
const struct ata_xfer_ent *ent;
const struct ata_timing *t;
for (ent = ata_xfer_tbl; ent->shift >= 0; ent++)
if (ent->shift == xfer_shift)
base_mode = ent->base;
for (t = ata_timing_find_mode(base_mode);
t && ata_xfer_mode2shift(t->mode) == xfer_shift; t++) {
unsigned short this_cycle;
switch (xfer_shift) {
case ATA_SHIFT_PIO:
case ATA_SHIFT_MWDMA:
this_cycle = t->cycle;
break;
case ATA_SHIFT_UDMA:
this_cycle = t->udma;
break;
default:
return 0xff;
}
if (cycle > this_cycle)
break;
last_mode = t->mode;
}
return last_mode;
}
[PATCH] libata: implement ata_down_xfermask_limit() Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
/**
* ata_down_xfermask_limit - adjust dev xfer masks downward
* @dev: Device to adjust xfer masks
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
* @sel: ATA_DNXFER_* selector
[PATCH] libata: implement ata_down_xfermask_limit() Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
*
* Adjust xfer masks of @dev downward. Note that this function
* does not apply the change. Invoking ata_set_mode() afterwards
* will apply the limit.
*
* LOCKING:
* Inherited from caller.
*
* RETURNS:
* 0 on success, negative errno on failure
*/
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel)
[PATCH] libata: implement ata_down_xfermask_limit() Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
{
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
char buf[32];
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
unsigned long orig_mask, xfer_mask;
unsigned long pio_mask, mwdma_mask, udma_mask;
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
int quiet, highbit;
[PATCH] libata: implement ata_down_xfermask_limit() Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
quiet = !!(sel & ATA_DNXFER_QUIET);
sel &= ~ATA_DNXFER_QUIET;
[PATCH] libata: implement ata_down_xfermask_limit() Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
xfer_mask = orig_mask = ata_pack_xfermask(dev->pio_mask,
dev->mwdma_mask,
dev->udma_mask);
ata_unpack_xfermask(xfer_mask, &pio_mask, &mwdma_mask, &udma_mask);
[PATCH] libata: implement ata_down_xfermask_limit() Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
libata: improve ata_down_xfermask_limit() Make ata_down_xfermask_limit() accept @sel instead of @force_pio0. @sel selects how the xfermask limit will be adjusted. The following selectors are defined. * ATA_DNXFER_PIO : only speed down PIO * ATA_DNXFER_DMA : only speed down DMA, don't cause transfer mode change * ATA_DNXFER_40C : apply 40c cable limit * ATA_DNXFER_FORCE_PIO : force PIO * ATA_DNXFER_FORCE_PIO0 : force PIO0 (same as original with @force_pio0 == 1) * ATA_DNXFER_ANY : same as original with @force_pio0 == 0 Currently, only ANY and FORCE_PIO0 are used to maintain the original behavior. Other selectors will be used later to improve EH speed down sequence. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:22:30 -07:00
switch (sel) {
case ATA_DNXFER_PIO:
highbit = fls(pio_mask) - 1;
pio_mask &= ~(1 << highbit);
break;
case ATA_DNXFER_DMA:
if (udma_mask) {
highbit = fls(udma_mask) - 1;
udma_mask &= ~(1 << highbit);
if (!udma_mask)
return -ENOENT;
} else if (mwdma_mask) {
highbit = fls(mwdma_mask) - 1;
mwdma_mask &= ~(1 << highbit);
if (!mwdma_mask)
return -ENOENT;
}
break;
case ATA_DNXFER_40C:
udma_mask &= ATA_UDMA_MASK_40C;
break;
case ATA_DNXFER_FORCE_PIO0:
pio_mask &= 1;
case ATA_DNXFER_FORCE_PIO:
mwdma_mask = 0;
udma_mask = 0;
break;
default:
BUG();
}
xfer_mask &= ata_pack_xfermask(pio_mask, mwdma_mask, udma_mask);
if (!(xfer_mask & ATA_MASK_PIO) || xfer_mask == orig_mask)
return -ENOENT;
if (!quiet) {
if (xfer_mask & (ATA_MASK_MWDMA | ATA_MASK_UDMA))
snprintf(buf, sizeof(buf), "%s:%s",
ata_mode_string(xfer_mask),
ata_mode_string(xfer_mask & ATA_MASK_PIO));
else
snprintf(buf, sizeof(buf), "%s",
ata_mode_string(xfer_mask));
ata_dev_printk(dev, KERN_WARNING,
"limiting speed to %s\n", buf);
}
[PATCH] libata: implement ata_down_xfermask_limit() Implement ata_down_xfermask_limit(). This function manipulates @dev->pio/mwdma/udma_mask such that the next lower transfer mode is selected. This will be used to improve ata_bus_probe() failure handling and later by EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:46 -07:00
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
&dev->udma_mask);
return 0;
}
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
static int ata_dev_set_mode(struct ata_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
libata: implement and use HORKAGE_NOSETXFER, take#2 PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present. The device is SATA and simply skipping SETXFER works around the problem. Implement ATA_HORKAGE_NOSETXFER and apply it to the device. Reported by Moritz Rigler in the following thread. http://thread.gmane.org/gmane.linux.ide/36790 and by Lars in bko#9540. Updated to whine and ignore NOSETXFER if PATA component is detected as suggested by Alan Cox. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Moritz Rigler <linux-ide@momail.e4ward.com> Reported-by: Lars <lars21ce@gmx.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-08 18:27:50 -06:00
struct ata_port *ap = dev->link->ap;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_eh_context *ehc = &dev->link->eh_context;
libata: implement and use HORKAGE_NOSETXFER, take#2 PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present. The device is SATA and simply skipping SETXFER works around the problem. Implement ATA_HORKAGE_NOSETXFER and apply it to the device. Reported by Moritz Rigler in the following thread. http://thread.gmane.org/gmane.linux.ide/36790 and by Lars in bko#9540. Updated to whine and ignore NOSETXFER if PATA component is detected as suggested by Alan Cox. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Moritz Rigler <linux-ide@momail.e4ward.com> Reported-by: Lars <lars21ce@gmx.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-08 18:27:50 -06:00
const bool nosetxfer = dev->horkage & ATA_HORKAGE_NOSETXFER;
libata: ignore deverr on SETXFER if mode is configured Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-06 18:34:08 -07:00
const char *dev_err_whine = "";
int ign_dev_err = 0;
libata: implement and use HORKAGE_NOSETXFER, take#2 PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present. The device is SATA and simply skipping SETXFER works around the problem. Implement ATA_HORKAGE_NOSETXFER and apply it to the device. Reported by Moritz Rigler in the following thread. http://thread.gmane.org/gmane.linux.ide/36790 and by Lars in bko#9540. Updated to whine and ignore NOSETXFER if PATA component is detected as suggested by Alan Cox. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Moritz Rigler <linux-ide@momail.e4ward.com> Reported-by: Lars <lars21ce@gmx.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-08 18:27:50 -06:00
unsigned int err_mask = 0;
[PATCH] libata: make ata_set_mode() responsible for failure handling Make ata_set_mode() responsible for determining whether to take port or device offline on failure. ata_dev_set_xfermode() and ata_dev_set_mode() indicate error to the caller instead of disabling port directly on failure. Also, for consistency, ata_dev_present() check is done in ata_set_mode() instead of ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 23:25:31 -07:00
int rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: clear ATA_DFLAG_PIO before setting it ata_dev_set_mode() is now responsible for managing ATA_DFLAG_PIO. Clear it before setting it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:53 -06:00
dev->flags &= ~ATA_DFLAG_PIO;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
libata: implement and use HORKAGE_NOSETXFER, take#2 PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present. The device is SATA and simply skipping SETXFER works around the problem. Implement ATA_HORKAGE_NOSETXFER and apply it to the device. Reported by Moritz Rigler in the following thread. http://thread.gmane.org/gmane.linux.ide/36790 and by Lars in bko#9540. Updated to whine and ignore NOSETXFER if PATA component is detected as suggested by Alan Cox. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Moritz Rigler <linux-ide@momail.e4ward.com> Reported-by: Lars <lars21ce@gmx.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-08 18:27:50 -06:00
if (nosetxfer && ap->flags & ATA_FLAG_SATA && ata_id_is_sata(dev->id))
dev_err_whine = " (SET_XFERMODE skipped)";
else {
if (nosetxfer)
ata_dev_printk(dev, KERN_WARNING,
"NOSETXFER but PATA detected - can't "
"skip SETXFER, might malfunction\n");
err_mask = ata_dev_set_xfermode(dev);
}
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
libata: ignore deverr on SETXFER if mode is configured Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-06 18:34:08 -07:00
if (err_mask & ~AC_ERR_DEV)
goto fail;
/* revalidate */
ehc->i.flags |= ATA_EHI_POST_SETMODE;
rc = ata_dev_revalidate(dev, ATA_DEV_UNKNOWN, 0);
ehc->i.flags &= ~ATA_EHI_POST_SETMODE;
if (rc)
return rc;
libata: Be a bit more slack about early devices We have a certain number of 'ATA' emulations often on CF or other flash devices that are at best "loosely based" on the CF 1.1 standard. These devices report themselves as disk but don't support the ATA minimal command set only the CF 1.1 set. Relax the PIO checking for devices reporting ATA rev 0, or no iordy support, or CFA. Rework the code a bit as it was already messy and this made it quite ugly. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-08 09:36:44 -06:00
if (dev->xfer_shift == ATA_SHIFT_PIO) {
/* Old CFA may refuse this command, which is just fine */
if (ata_id_is_cfa(dev->id))
ign_dev_err = 1;
/* Catch several broken garbage emulations plus some pre
ATA devices */
if (ata_id_major_version(dev->id) == 0 &&
dev->pio_mode <= XFER_PIO_2)
ign_dev_err = 1;
/* Some very old devices and some bad newer ones fail
any kind of SET_XFERMODE request but support PIO0-2
timings and no IORDY */
if (!ata_id_has_iordy(dev->id) && dev->pio_mode <= XFER_PIO_2)
ign_dev_err = 1;
}
libata-core: Be a bit more relaxed about early DMA zero devices I guess Windows didn't care about the command so neither did they Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 12:18:27 -06:00
/* Early MWDMA devices do DMA but don't allow DMA mode setting.
Don't fail an MWDMA0 set IFF the device indicates it is in MWDMA0 */
libata/pata_it821x: Improve handling of poorly compatible emulations Some it821x RAID firmwares return 0 for the err return off both devices. A similar issue occurs with the slave returning 0 not 1 if you plug a gigabyte sata ramdisk into a controller that fakes two SATA ports as master/slave on an SFF channel. The patch does the following - Allow the 'failed diagnostics' case on both master and slave - Move the HORKAGE_DIAGNOSTIC check after ->dev_config This second change also allows IT821x to fix up a problem where we report drive diagnostic failures when in fact the drive is fine but the microcontroller firmware doesn't appear to get it right. IT821x clears the flag again to avoid giving the user bogus warnings about their disk. The other IT821x change is a bit ugly, we slightly abuse the cable type hook to fiddle with the identify data for the devices. We could add a new hook for this but as we have only one offender and no more seeming likely it seems better to keep libata-core clean. Please let this sit in -mm briefly, just in case the relaxed checking breaks some other emulated interface. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-25 07:21:16 -06:00
if (dev->xfer_shift == ATA_SHIFT_MWDMA &&
libata-core: Be a bit more relaxed about early DMA zero devices I guess Windows didn't care about the command so neither did they Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 12:18:27 -06:00
dev->dma_mode == XFER_MW_DMA_0 &&
(dev->id[63] >> 8) & 1)
libata: ignore deverr on SETXFER if mode is configured Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-06 18:34:08 -07:00
ign_dev_err = 1;
libata-core: Be a bit more relaxed about early DMA zero devices I guess Windows didn't care about the command so neither did they Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-15 12:18:27 -06:00
libata: ignore deverr on SETXFER if mode is configured Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-06 18:34:08 -07:00
/* if the device is actually configured correctly, ignore dev err */
if (dev->xfer_mode == ata_xfer_mask2mode(ata_id_xfermask(dev->id)))
ign_dev_err = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: ignore deverr on SETXFER if mode is configured Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-06 18:34:08 -07:00
if (err_mask & AC_ERR_DEV) {
if (!ign_dev_err)
goto fail;
else
dev_err_whine = " (device error ignored)";
}
[PATCH] libata: revalidate after transfer mode configuration Revalidate device after transfer mode configuration. This also makes dev->id up-to-date. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
[PATCH] libata: use xfer_mask helpers in ata_dev_set_mode() Rewrite hardcoded xfer_mode string determination in ata_dev_set_mode() using xfer_mask helpers. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
dev->xfer_shift, (int)dev->xfer_mode);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: ignore deverr on SETXFER if mode is configured Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-06 18:34:08 -07:00
ata_dev_printk(dev, KERN_INFO, "configured for %s%s\n",
ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)),
dev_err_whine);
[PATCH] libata: make ata_set_mode() responsible for failure handling Make ata_set_mode() responsible for determining whether to take port or device offline on failure. ata_dev_set_xfermode() and ata_dev_set_mode() indicate error to the caller instead of disabling port directly on failure. Also, for consistency, ata_dev_present() check is done in ata_set_mode() instead of ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 23:25:31 -07:00
return 0;
libata: ignore deverr on SETXFER if mode is configured Some controllers (VIA CX700) raise device error on SETXFER even after mode configuration succeeded. Update ata_dev_set_mode() such that device error is ignored if transfer mode is configured correctly. To implement this, device is revalidated even after device error on SETXFER. This fixes kernel bugzilla bug 8563. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-06 18:34:08 -07:00
fail:
ata_dev_printk(dev, KERN_ERR, "failed to set xfermode "
"(err_mask=0x%x)\n", err_mask);
return -EIO;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
/**
pata: expose set_mode method so it can be wrapped This splits set_mode into do_set_mode and the wrapper so that a driver can call the standard method inside its own. This in theory also obsoletes ->post_set_mode(). Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:52 -07:00
* ata_do_set_mode - Program timings and issue SET FEATURES - XFER
libata-link: linkify config/EH related functions Make the following functions deal with ata_link instead of ata_port. * ata_set_mode() * ata_eh_autopsy() and related functions * ata_eh_report() and related functions * suspend/resume related functions * ata_eh_recover() and related functions Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: link on which timings will be programmed
drivers/ata/: Spelling fixes Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03 08:08:11 -07:00
* @r_failed_dev: out parameter for failed device
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
pata: expose set_mode method so it can be wrapped This splits set_mode into do_set_mode and the wrapper so that a driver can call the standard method inside its own. This in theory also obsoletes ->post_set_mode(). Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:52 -07:00
* Standard implementation of the function used to tune and set
* ATA device disk transfer mode (PIO3, UDMA6, etc.). If
* ata_dev_set_mode() fails, pointer to the failing device is
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
* returned in @r_failed_dev.
libata: more doc updates Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c.
2005-05-30 13:41:05 -06:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* LOCKING:
libata: doc updates
2005-05-30 17:49:12 -06:00
* PCI/etc. bus probe sem.
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
*
* RETURNS:
* 0 on success, negative errno otherwise
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
pata: expose set_mode method so it can be wrapped This splits set_mode into do_set_mode and the wrapper so that a driver can call the standard method inside its own. This in theory also obsoletes ->post_set_mode(). Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:52 -07:00
libata-link: linkify config/EH related functions Make the following functions deal with ata_link instead of ata_port. * ata_set_mode() * ata_eh_autopsy() and related functions * ata_eh_report() and related functions * suspend/resume related functions * ata_eh_recover() and related functions Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
libata-link: linkify config/EH related functions Make the following functions deal with ata_link instead of ata_port. * ata_set_mode() * ata_eh_autopsy() and related functions * ata_eh_report() and related functions * suspend/resume related functions * ata_eh_recover() and related functions Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
struct ata_port *ap = link->ap;
[PATCH] libata: reorganize ata_set_mode() Merge ata_host_set_pio() and ata_host_set_dma() into ata_set_mode() and use function-level *dev to iterate over devices. This eases soon-to-follow ata_set_mode() interface change. While at it, kill an unnecessary comment and normalize others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
struct ata_device *dev;
libata-link: implement and use link/device iterators Multiple links and different number of devices per link should be considered to iterate over links and devices. This patch implements and uses link and device iterators - ata_port_for_each_link() and ata_link_for_each_dev() - and ata_link_max_devices(). This change makes a lot of functions iterate over only possible devices instead of from dev 0 to dev ATA_MAX_DEVICES. All such changes have been examined and nothing should be broken. While at it, add a separating comment before device helpers to distinguish them better from link helpers and others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int rc = 0, used_dma = 0, found = 0;
[PATCH] libata: move ->set_mode() handling into ata_set_mode() Move ->set_mode() handlng into ata_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:37 -06:00
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
/* step 1: calculate xfer_mask */
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, link, ENABLED) {
libata: xfer_mask is unsigned long not unsigned int Jeff says xfer_mask is unsigned long not unsigned int. Convert all xfermask fields and handling functions to deal with unsigned longs. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:42 -07:00
unsigned long pio_mask, dma_mask;
libata: Add a drivers/ide style DMA disable This is useful when debugging, handling problem systems, or for distributions just to get the system installed so it can be sorted out later. This is a bit smarter than the old IDE one and lets you do libata.dma=0 Disable all PATA DMA like old IDE libata.dma=1 Disk DMA only libata.dma=2 ATAPI DMA only libata.dma=4 CF DMA only (or combinations thereof - 0,1,3 being the useful ones I suspect) (I've split CF as it seems to be a seperate case of pain and suffering different to the others and caused by assorted PIO wired adapters etc) Signed-off-by: Alan Cox <alan@redhat.com> [edited to work on SATA too, changing name from 'pata_dma' to 'dma'] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-02 10:38:26 -06:00
unsigned int mode_mask;
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
libata: Add a drivers/ide style DMA disable This is useful when debugging, handling problem systems, or for distributions just to get the system installed so it can be sorted out later. This is a bit smarter than the old IDE one and lets you do libata.dma=0 Disable all PATA DMA like old IDE libata.dma=1 Disk DMA only libata.dma=2 ATAPI DMA only libata.dma=4 CF DMA only (or combinations thereof - 0,1,3 being the useful ones I suspect) (I've split CF as it seems to be a seperate case of pain and suffering different to the others and caused by assorted PIO wired adapters etc) Signed-off-by: Alan Cox <alan@redhat.com> [edited to work on SATA too, changing name from 'pata_dma' to 'dma'] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-02 10:38:26 -06:00
mode_mask = ATA_DMA_MASK_ATA;
if (dev->class == ATA_DEV_ATAPI)
mode_mask = ATA_DMA_MASK_ATAPI;
else if (ata_id_is_cfa(dev->id))
mode_mask = ATA_DMA_MASK_CFA;
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
ata_dev_xfermask(dev);
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
ata_force_xfermask(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: add per-dev pio/mwdma/udma_mask Add per-dev pio/mwdma/udma_mask. All transfer mode limits used to be applied to ap->*_mask which unnecessarily restricted other devices sharing the port. This change will also benefit later EH speed down and hotplug. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 22:07:50 -07:00
pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
libata: Add a drivers/ide style DMA disable This is useful when debugging, handling problem systems, or for distributions just to get the system installed so it can be sorted out later. This is a bit smarter than the old IDE one and lets you do libata.dma=0 Disable all PATA DMA like old IDE libata.dma=1 Disk DMA only libata.dma=2 ATAPI DMA only libata.dma=4 CF DMA only (or combinations thereof - 0,1,3 being the useful ones I suspect) (I've split CF as it seems to be a seperate case of pain and suffering different to the others and caused by assorted PIO wired adapters etc) Signed-off-by: Alan Cox <alan@redhat.com> [edited to work on SATA too, changing name from 'pata_dma' to 'dma'] Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-02 10:38:26 -06:00
if (libata_dma_mask & mode_mask)
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
else
dma_mask = 0;
[PATCH] libata: add per-dev pio/mwdma/udma_mask Add per-dev pio/mwdma/udma_mask. All transfer mode limits used to be applied to ap->*_mask which unnecessarily restricted other devices sharing the port. This change will also benefit later EH speed down and hotplug. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 22:07:50 -07:00
dev->pio_mode = ata_xfer_mask2mode(pio_mask);
dev->dma_mode = ata_xfer_mask2mode(dma_mask);
[PATCH] libata: Simplex and other mode filtering logic Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27 10:58:20 -07:00
[PATCH] libata: make ata_set_mode() handle no-device case properly Make ata_set_mode() return without doing anything if there is no device on the port. This is in preparation for ata_bus_probe() changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
found = 1;
libata: Fix a large collection of DMA mode mismatches Dave Müller sent a diff for the pata_oldpiix that highlighted a problem where a lot of the ATA drivers assume dma_mode == 0 means "no DMA" while the core code uses 0xFF. This turns out to have other consequences such as code doing >= XFER_UDMA_0 also catching 0xFF as UDMAlots. Fortunately it doesn't generally affect set_dma_mode, although some drivers call back into their own set mode code from other points. Having been through the drivers I've added helpers for using_udma/using_mwdma dma_enabled so that people don't open code ranges that may change (eg if UDMA8 appears somewhere) Thanks to David for the initial bits [and added fix for pata_oldpiix from and signed-off-by Dave Mueller <dave.mueller@gmx.ch> -jg] Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-01 02:18:34 -06:00
if (ata_dma_enabled(dev))
[PATCH] libata: Simplex and other mode filtering logic Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27 10:58:20 -07:00
used_dma = 1;
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
}
[PATCH] libata: make ata_set_mode() handle no-device case properly Make ata_set_mode() return without doing anything if there is no device on the port. This is in preparation for ata_bus_probe() changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
if (!found)
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
goto out;
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
/* step 2: always set host PIO timings */
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, link, ENABLED) {
libata: clean up xfermode / PATA timing related stuff * s/ATA_BITS_(PIO|MWDMA|UDMA)/ATA_NR_\1_MODES/g * Consistently use 0xff to indicate invalid transfer mode (0x00 is valid for PIO_SLOW). * Make ata_xfer_mode2mask() return proper mode mask instead of just the highest bit. * Sort ata_timing table in increasing xfermode order and update ata_timing_find_mode() accordingly. This patch doesn't introduce any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:40 -07:00
if (dev->pio_mode == 0xff) {
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
[PATCH] libata: reorganize ata_set_mode() Merge ata_host_set_pio() and ata_host_set_dma() into ata_set_mode() and use function-level *dev to iterate over devices. This eases soon-to-follow ata_set_mode() interface change. While at it, kill an unnecessary comment and normalize others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
rc = -EINVAL;
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
goto out;
[PATCH] libata: reorganize ata_set_mode() Merge ata_host_set_pio() and ata_host_set_dma() into ata_set_mode() and use function-level *dev to iterate over devices. This eases soon-to-follow ata_set_mode() interface change. While at it, kill an unnecessary comment and normalize others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
}
dev->xfer_mode = dev->pio_mode;
dev->xfer_shift = ATA_SHIFT_PIO;
if (ap->ops->set_piomode)
ap->ops->set_piomode(ap, dev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
/* step 3: set host DMA timings */
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, link, ENABLED) {
if (!ata_dma_enabled(dev))
[PATCH] libata: reorganize ata_set_mode() Merge ata_host_set_pio() and ata_host_set_dma() into ata_set_mode() and use function-level *dev to iterate over devices. This eases soon-to-follow ata_set_mode() interface change. While at it, kill an unnecessary comment and normalize others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
continue;
dev->xfer_mode = dev->dma_mode;
dev->xfer_shift = ata_xfer_mode2shift(dev->dma_mode);
if (ap->ops->set_dmamode)
ap->ops->set_dmamode(ap, dev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* step 4: update devices' xfer mode */
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_dev(dev, link, ENABLED) {
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
rc = ata_dev_set_mode(dev);
[PATCH] libata: fix ata_set_mode() return value Make ata_set_mode() return correct error value when ata_dev_set_mode() fails. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:17 -07:00
if (rc)
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
goto out;
[PATCH] libata: make ata_set_mode() responsible for failure handling Make ata_set_mode() responsible for determining whether to take port or device offline on failure. ata_dev_set_xfermode() and ata_dev_set_mode() indicate error to the caller instead of disabling port directly on failure. Also, for consistency, ata_dev_present() check is done in ata_set_mode() instead of ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 23:25:31 -07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: reorganize ata_set_mode() Merge ata_host_set_pio() and ata_host_set_dma() into ata_set_mode() and use function-level *dev to iterate over devices. This eases soon-to-follow ata_set_mode() interface change. While at it, kill an unnecessary comment and normalize others. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
/* Record simplex status. If we selected DMA then the other
* host channels are not permitted to do so.
[PATCH] libata: Simplex and other mode filtering logic Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27 10:58:20 -07:00
*/
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
if (used_dma && (ap->host->flags & ATA_HOST_SIMPLEX))
libata-core: Fix simplex handling The initial simplex handling code is fooled if you suspend and resume. This also causes problems with some single channel controllers which claim to be simplex. The fix is fairly simple, instead of keeping a flag to remember if we gave away the simplex channel we remember the actual owner. As the owner is always part of the host_set we don't even need a refcount. Knowing the owner also means we can reassign simplex DMA channels in future hotplug code etc if we need to Signed-off-by: Alan Cox <alan@redhat.com> (and a signed-off for the patch I sent before while I remember) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-01 10:36:46 -07:00
ap->host->simplex_claimed = ap;
[PATCH] libata: Simplex and other mode filtering logic Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27 10:58:20 -07:00
[PATCH] libata: don't disable devices from ata_set_mode() When ata_set_mode() fails on a device, make ata_set_mode() return error code and pointer to the device instead of disabling it directly. This gives more control to higher level driving logic. This patch does not change the end result (configured transfer mode) although it may make libata repeat mode configuration to the peer of a failing device. Later ata_bus_probe() rewrite will make full use of this change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
out:
if (rc)
*r_failed_dev = dev;
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
libata: separate out ata_wait_ready() and implement ata_wait_after_reset() Factor out waiting logic (which is common to all ATA controllers) from ata_sff_wait_ready() into ata_wait_ready(). ata_wait_ready() takes @check_ready function pointer and uses it to poll for readiness. This allows non-SFF controllers to use ata_wait_ready() to wait for link readiness. This patch also implements ata_wait_after_reset() - generic version of ata_sff_wait_after_reset() - using ata_wait_ready(). ata_sff_wait_ready() is reimplemented using ata_wait_ready() and ata_sff_check_ready(). Functionality remains the same. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
/**
* ata_wait_ready - wait for link to become ready
* @link: link to be waited on
* @deadline: deadline jiffies for the operation
* @check_ready: callback to check link readiness
*
* Wait for @link to become ready. @check_ready should return
* positive number if @link is ready, 0 if it isn't, -ENODEV if
* link doesn't seem to be occupied, other errno for other error
* conditions.
*
* Transient -ENODEV conditions are allowed for
* ATA_TMOUT_FF_WAIT.
*
* LOCKING:
* EH context.
*
* RETURNS:
* 0 if @linke is ready before @deadline; otherwise, -errno.
*/
int ata_wait_ready(struct ata_link *link, unsigned long deadline,
int (*check_ready)(struct ata_link *link))
{
unsigned long start = jiffies;
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
unsigned long nodev_deadline = ata_deadline(start, ATA_TMOUT_FF_WAIT);
libata: separate out ata_wait_ready() and implement ata_wait_after_reset() Factor out waiting logic (which is common to all ATA controllers) from ata_sff_wait_ready() into ata_wait_ready(). ata_wait_ready() takes @check_ready function pointer and uses it to poll for readiness. This allows non-SFF controllers to use ata_wait_ready() to wait for link readiness. This patch also implements ata_wait_after_reset() - generic version of ata_sff_wait_after_reset() - using ata_wait_ready(). ata_sff_wait_ready() is reimplemented using ata_wait_ready() and ata_sff_check_ready(). Functionality remains the same. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
int warned = 0;
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
/* Slave readiness can't be tested separately from master. On
* M/S emulation configuration, this function should be called
* only on the master and it will handle both master and slave.
*/
WARN_ON(link == link->ap->slave_link);
libata: separate out ata_wait_ready() and implement ata_wait_after_reset() Factor out waiting logic (which is common to all ATA controllers) from ata_sff_wait_ready() into ata_wait_ready(). ata_wait_ready() takes @check_ready function pointer and uses it to poll for readiness. This allows non-SFF controllers to use ata_wait_ready() to wait for link readiness. This patch also implements ata_wait_after_reset() - generic version of ata_sff_wait_after_reset() - using ata_wait_ready(). ata_sff_wait_ready() is reimplemented using ata_wait_ready() and ata_sff_check_ready(). Functionality remains the same. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
if (time_after(nodev_deadline, deadline))
nodev_deadline = deadline;
while (1) {
unsigned long now = jiffies;
int ready, tmp;
ready = tmp = check_ready(link);
if (ready > 0)
return 0;
/* -ENODEV could be transient. Ignore -ENODEV if link
* is online. Also, some SATA devices take a long
* time to clear 0xff after reset. For example,
* HHD424020F7SV00 iVDR needs >= 800ms while Quantum
* GoVault needs even more than that. Wait for
* ATA_TMOUT_FF_WAIT on -ENODEV if link isn't offline.
*
* Note that some PATA controllers (pata_ali) explode
* if status register is read more than once when
* there's no device attached.
*/
if (ready == -ENODEV) {
if (ata_link_online(link))
ready = 0;
else if ((link->ap->flags & ATA_FLAG_SATA) &&
!ata_link_offline(link) &&
time_before(now, nodev_deadline))
ready = 0;
}
if (ready)
return ready;
if (time_after(now, deadline))
return -EBUSY;
if (!warned && time_after(now, start + 5 * HZ) &&
(deadline - now > 3 * HZ)) {
ata_link_printk(link, KERN_WARNING,
"link is slow to respond, please be patient "
"(ready=%d)\n", tmp);
warned = 1;
}
msleep(50);
}
}
/**
* ata_wait_after_reset - wait for link to become ready after reset
* @link: link to be waited on
* @deadline: deadline jiffies for the operation
* @check_ready: callback to check link readiness
*
* Wait for @link to become ready after reset.
*
* LOCKING:
* EH context.
*
* RETURNS:
* 0 if @linke is ready before @deadline; otherwise, -errno.
*/
libata: functions with definition should not be extern Noticed by sparse drivers/ata/libata-core.c:3380:12: warning: function 'ata_wait_after_reset' with external linkage has definition Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-24 19:37:34 -06:00
int ata_wait_after_reset(struct ata_link *link, unsigned long deadline,
libata: separate out ata_wait_ready() and implement ata_wait_after_reset() Factor out waiting logic (which is common to all ATA controllers) from ata_sff_wait_ready() into ata_wait_ready(). ata_wait_ready() takes @check_ready function pointer and uses it to poll for readiness. This allows non-SFF controllers to use ata_wait_ready() to wait for link readiness. This patch also implements ata_wait_after_reset() - generic version of ata_sff_wait_after_reset() - using ata_wait_ready(). ata_sff_wait_ready() is reimplemented using ata_wait_ready() and ata_sff_check_ready(). Functionality remains the same. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
int (*check_ready)(struct ata_link *link))
{
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
msleep(ATA_WAIT_AFTER_RESET);
libata: separate out ata_wait_ready() and implement ata_wait_after_reset() Factor out waiting logic (which is common to all ATA controllers) from ata_sff_wait_ready() into ata_wait_ready(). ata_wait_ready() takes @check_ready function pointer and uses it to poll for readiness. This allows non-SFF controllers to use ata_wait_ready() to wait for link readiness. This patch also implements ata_wait_after_reset() - generic version of ata_sff_wait_after_reset() - using ata_wait_ready(). ata_sff_wait_ready() is reimplemented using ata_wait_ready() and ata_sff_check_ready(). Functionality remains the same. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
return ata_wait_ready(link, deadline, check_ready);
}
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
/**
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* sata_link_debounce - debounce SATA phy status
* @link: ATA link to debounce SATA phy status for
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
* @params: timing parameters { interval, duratinon, timeout } in msec
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
* @deadline: deadline jiffies for the operation
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Make sure SStatus of @link reaches stable state, determined by
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
* holding the same value where DET is not 1 for @duration polled
* every @interval, before @timeout. Timeout constraints the
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
* beginning of the stable state. Because DET gets stuck at 1 on
* some controllers after hot unplugging, this functions waits
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
* until timeout then returns 0 if DET is stable at 1.
*
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
* @timeout is further limited by @deadline. The sooner of the
* two is used.
*
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno on failure.
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int sata_link_debounce(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
[PATCH] libata: separate out sata_phy_resume() from sata_std_hardreset() This patch separates out sata_phy_resume() from sata_std_hardreset(). The function will later be used by probeinit callback. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-02 02:20:00 -07:00
{
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
unsigned long interval = params[0];
unsigned long duration = params[1];
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
unsigned long last_jiffies, t;
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
u32 last, cur;
int rc;
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
t = ata_deadline(jiffies, params[2]);
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
if (time_before(t, deadline))
deadline = t;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
return rc;
cur &= 0xf;
last = cur;
last_jiffies = jiffies;
while (1) {
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
msleep(interval);
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_read(link, SCR_STATUS, &cur)))
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
return rc;
cur &= 0xf;
/* DET stable? */
if (cur == last) {
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
if (cur == 1 && time_before(jiffies, deadline))
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
continue;
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
if (time_after(jiffies,
ata_deadline(last_jiffies, duration)))
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
return 0;
continue;
}
/* unstable, start over */
last = cur;
last_jiffies = jiffies;
libata: quickly trigger SATA SPD down after debouncing failed Debouncing failure is a good indicator of basic link problem. Use -EPIPE to indicate debouncing failure and make ata_eh_reset() invoke sata_down_spd_limit() if the error occurs during reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:40 -06:00
/* Check deadline. If debouncing failed, return
* -EPIPE to tell upper layer to lower link speed.
*/
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
if (time_after(jiffies, deadline))
libata: quickly trigger SATA SPD down after debouncing failed Debouncing failure is a good indicator of basic link problem. Use -EPIPE to indicate debouncing failure and make ata_eh_reset() invoke sata_down_spd_limit() if the error occurs during reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:40 -06:00
return -EPIPE;
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
}
}
/**
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* sata_link_resume - resume SATA link
* @link: ATA link to resume SATA
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
* @params: timing parameters { interval, duratinon, timeout } in msec
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
* @deadline: deadline jiffies for the operation
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Resume SATA phy @link and debounce it.
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno on failure.
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int sata_link_resume(struct ata_link *link, const unsigned long *params,
unsigned long deadline)
[PATCH] libata-hp-prep: implement sata_phy_debounce() With hotplug, PHY always needs to be debounced before a reset as any reset might find new devices. Extract PHY waiting code from sata_phy_resume() and extend it to include SStatus debouncing. Note that sata_phy_debounce() is superset of what used to be done inside sata_phy_resume(). Three default debounce timing parameters are defined to be used by hot/boot plug. As resume failure during probing will be properly handled as errors, timeout doesn't have to be long as before. probeinit() uses the same timeout to retain the original behavior. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:46 -06:00
{
libata: retry link resume if necessary Interestingly, when SIDPR is used in ata_piix, writes to DET in SControl sometimes get ignored leading to detection failure. Update sata_link_resume() such that it reads back SControl after clearing DET and retry if it's not clear. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: fengxiangjun <fengxiangjun@neusoft.com> Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-01-10 19:14:44 -07:00
int tries = ATA_LINK_RESUME_TRIES;
libata: clear SError after link resume SError used to be cleared in ->postreset. This has small hotplug race condition. If a device is plugged in after reset is complete but postreset hasn't run yet, its hotplug event gets lost when SError is cleared. This patch makes sata_link_resume() clear SError. This kills the race condition and makes a lot of sense as some PMP and host PHYs don't work properly without SError cleared. This change makes sata_pmp_std_{pre|post}_reset()'s unnecessary as they become identical to ata_std counterparts. It also simplifies sata_pmp_hardreset() and ahci_vt8251_hardreset(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
u32 scontrol, serror;
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
int rc;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
return rc;
[PATCH] libata: separate out sata_phy_resume() from sata_std_hardreset() This patch separates out sata_phy_resume() from sata_std_hardreset(). The function will later be used by probeinit callback. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-02 02:20:00 -07:00
libata: retry link resume if necessary Interestingly, when SIDPR is used in ata_piix, writes to DET in SControl sometimes get ignored leading to detection failure. Update sata_link_resume() such that it reads back SControl after clearing DET and retry if it's not clear. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: fengxiangjun <fengxiangjun@neusoft.com> Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-01-10 19:14:44 -07:00
/*
* Writes to SControl sometimes get ignored under certain
* controllers (ata_piix SIDPR). Make sure DET actually is
* cleared.
*/
do {
scontrol = (scontrol & 0x0f0) | 0x300;
if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
return rc;
/*
* Some PHYs react badly if SStatus is pounded
* immediately after resuming. Delay 200ms before
* debouncing.
*/
msleep(200);
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
libata: retry link resume if necessary Interestingly, when SIDPR is used in ata_piix, writes to DET in SControl sometimes get ignored leading to detection failure. Update sata_link_resume() such that it reads back SControl after clearing DET and retry if it's not clear. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: fengxiangjun <fengxiangjun@neusoft.com> Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-01-10 19:14:44 -07:00
/* is SControl restored correctly? */
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
return rc;
} while ((scontrol & 0xf0f) != 0x300 && --tries);
[PATCH] libata: separate out sata_phy_resume() from sata_std_hardreset() This patch separates out sata_phy_resume() from sata_std_hardreset(). The function will later be used by probeinit callback. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-02 02:20:00 -07:00
libata: retry link resume if necessary Interestingly, when SIDPR is used in ata_piix, writes to DET in SControl sometimes get ignored leading to detection failure. Update sata_link_resume() such that it reads back SControl after clearing DET and retry if it's not clear. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: fengxiangjun <fengxiangjun@neusoft.com> Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-01-10 19:14:44 -07:00
if ((scontrol & 0xf0f) != 0x300) {
ata_link_printk(link, KERN_ERR,
"failed to resume link (SControl %X)\n",
scontrol);
return 0;
}
if (tries < ATA_LINK_RESUME_TRIES)
ata_link_printk(link, KERN_WARNING,
"link resume succeeded after %d retries\n",
ATA_LINK_RESUME_TRIES - tries);
[PATCH] libata: separate out sata_phy_resume() from sata_std_hardreset() This patch separates out sata_phy_resume() from sata_std_hardreset(). The function will later be used by probeinit callback. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-02 02:20:00 -07:00
libata: clear SError after link resume SError used to be cleared in ->postreset. This has small hotplug race condition. If a device is plugged in after reset is complete but postreset hasn't run yet, its hotplug event gets lost when SError is cleared. This patch makes sata_link_resume() clear SError. This kills the race condition and makes a lot of sense as some PMP and host PHYs don't work properly without SError cleared. This change makes sata_pmp_std_{pre|post}_reset()'s unnecessary as they become identical to ata_std counterparts. It also simplifies sata_pmp_hardreset() and ahci_vt8251_hardreset(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
libata: kill hotplug related race condition Originally, whole reset processing was done while the port is frozen and SError was cleared during @postreset(). This had two race conditions. 1: hotplug could occur after reset but before SError is cleared and libata won't know about it. 2: hotplug could occur after all the reset is complete but before the port is thawed. As all events are cleared on thaw, the hotplug event would be lost. Commit ac371987a81c61c2efbd6931245cdcaf43baad89 kills the first race by clearing SError during link resume but before link onlineness test. However, this doesn't fix race #2 and in some cases clearing SError after SRST is a good idea. This patch solves this problem by cross checking link onlineness with classification result after SError is cleared and port is thawed. Reset is retried if link is online but all devices attached to the link are unknown. As all devices will be revalidated, this one-way check is enough to ensure that all devices are detected and revalidated reliably. This, luckily, also fixes the cases where host controller returns bogus status while harddrive is spinning up after hotplug making classification run before the device sends the first FIS and thus causes misdetection. Low level drivers can bypass the logic by setting class explicitly to ATA_DEV_NONE if ever necessary (currently none requires this). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 10:15:08 -06:00
/* clear SError, some PHYs require this even for SRST to work */
libata: clear SError after link resume SError used to be cleared in ->postreset. This has small hotplug race condition. If a device is plugged in after reset is complete but postreset hasn't run yet, its hotplug event gets lost when SError is cleared. This patch makes sata_link_resume() clear SError. This kills the race condition and makes a lot of sense as some PMP and host PHYs don't work properly without SError cleared. This change makes sata_pmp_std_{pre|post}_reset()'s unnecessary as they become identical to ata_std counterparts. It also simplifies sata_pmp_hardreset() and ahci_vt8251_hardreset(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
rc = sata_scr_write(link, SCR_ERROR, serror);
libata: kill hotplug related race condition Originally, whole reset processing was done while the port is frozen and SError was cleared during @postreset(). This had two race conditions. 1: hotplug could occur after reset but before SError is cleared and libata won't know about it. 2: hotplug could occur after all the reset is complete but before the port is thawed. As all events are cleared on thaw, the hotplug event would be lost. Commit ac371987a81c61c2efbd6931245cdcaf43baad89 kills the first race by clearing SError during link resume but before link onlineness test. However, this doesn't fix race #2 and in some cases clearing SError after SRST is a good idea. This patch solves this problem by cross checking link onlineness with classification result after SError is cleared and port is thawed. Reset is retried if link is online but all devices attached to the link are unknown. As all devices will be revalidated, this one-way check is enough to ensure that all devices are detected and revalidated reliably. This, luckily, also fixes the cases where host controller returns bogus status while harddrive is spinning up after hotplug making classification run before the device sends the first FIS and thus causes misdetection. Low level drivers can bypass the logic by setting class explicitly to ATA_DEV_NONE if ever necessary (currently none requires this). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 10:15:08 -06:00
return rc != -EINVAL ? rc : 0;
[PATCH] libata: separate out sata_phy_resume() from sata_std_hardreset() This patch separates out sata_phy_resume() from sata_std_hardreset(). The function will later be used by probeinit callback. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-02 02:20:00 -07:00
}
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:48 -06:00
/**
libata: separate out ata_std_prereset() from ata_sff_prereset() Separate out generic ATA portion from ata_sff_prereset() into ata_std_prereset() and implement ata_sff_prereset() using the std version. Waiting for device readiness is the only SFF specific part. ata_base_port_ops now has ata_std_prereset() for its prereset and ata_sff_port_ops overrides it to ata_sff_prereset(). This change can affect pdc_adma, ahci, sata_fsl and sata_sil24. pdc_adma implements its own prereset using ata_sff_prereset() and the rest has hardreset and thus are unaffected by this change. This change reflects real world situation. There is no generic way to wait for device readiness for non-SFF controllers and some of them don't have any mechanism for that. Non-sff drivers which don't have hardreset should wrap ata_std_prereset() and wait for device readiness itself but there's no such driver now and isn't likely to be popular in the future either. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:18 -06:00
* ata_std_prereset - prepare for reset
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: ATA link to be reset
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
* @deadline: deadline jiffies for the operation
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:48 -06:00
*
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link is about to be reset. Initialize it. Failure from
libata: improve ata_std_prereset() This patch updates ata_std_prereset() as follows. * Don't fail on phy resume failure. Just whine and continue. Failure from prereset makes libata abort whole reset sequence and give up the port, so prereset() should be best effort. This is more important with the coming EH updates as prereset() will be called with shorter timeout. * If ata_wait_ready() fails, whine and request hardreset instead. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
* prereset makes libata abort whole reset sequence and give up
* that port, so prereset should be best-effort. It does its
* best to prepare for reset sequence but if things go wrong, it
* should just whine, not fail.
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:48 -06:00
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
libata: separate out ata_std_prereset() from ata_sff_prereset() Separate out generic ATA portion from ata_sff_prereset() into ata_std_prereset() and implement ata_sff_prereset() using the std version. Waiting for device readiness is the only SFF specific part. ata_base_port_ops now has ata_std_prereset() for its prereset and ata_sff_port_ops overrides it to ata_sff_prereset(). This change can affect pdc_adma, ahci, sata_fsl and sata_sil24. pdc_adma implements its own prereset using ata_sff_prereset() and the rest has hardreset and thus are unaffected by this change. This change reflects real world situation. There is no generic way to wait for device readiness for non-SFF controllers and some of them don't have any mechanism for that. Non-sff drivers which don't have hardreset should wrap ata_std_prereset() and wait for device readiness itself but there's no such driver now and isn't likely to be popular in the future either. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:18 -06:00
int ata_std_prereset(struct ata_link *link, unsigned long deadline)
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:48 -06:00
{
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
struct ata_port *ap = link->ap;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
struct ata_eh_context *ehc = &link->eh_context;
[PATCH] libata: clean up debounce parameters and improve parameter selection The names of predefined debounce timing parameters didn't exactly match their usages. Rename to more generic names and implement param selection helper sata_ehc_deb_timing() which uses EHI_HOTPLUGGED to select params. Combined with the previous EHI_RESUME_LINK differentiation, this makes parameter selection accurate. e.g. user scan resumes link but normal deb param is used instead of hotplug param. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:26 -06:00
const unsigned long *timing = sata_ehc_deb_timing(ehc);
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:48 -06:00
int rc;
/* if we're about to do hardreset, nothing more to do */
if (ehc->i.action & ATA_EH_HARDRESET)
return 0;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
/* if SATA, resume link */
libata: replace ap->cbl tests with ATA_FLAG_SATA tests ap->cbl == ATA_CBL_SATA indicates SATA cable while ap->flags & ATA_FLAG_SATA indicates SATA host port. Till now they always gave the same result but SATA/PATA bridge handling will change that. Switch to ATA_FLAG_SATA test if we're testing for host port type. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21 10:33:47 -06:00
if (ap->flags & ATA_FLAG_SATA) {
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
rc = sata_link_resume(link, timing, deadline);
libata: improve ata_std_prereset() This patch updates ata_std_prereset() as follows. * Don't fail on phy resume failure. Just whine and continue. Failure from prereset makes libata abort whole reset sequence and give up the port, so prereset() should be best effort. This is more important with the coming EH updates as prereset() will be called with shorter timeout. * If ata_wait_ready() fails, whine and request hardreset instead. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
/* whine about phy resume failure but proceed */
if (rc && rc != -EOPNOTSUPP)
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
ata_link_printk(link, KERN_WARNING, "failed to resume "
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:48 -06:00
"link for reset (errno=%d)\n", rc);
}
libata: move link onlineness check out of softreset methods Currently, SATA softresets should do link onlineness check before actually performing SRST protocol but it doesn't really belong to softreset. This patch moves onlineness check in softreset to ata_eh_reset() and ata_eh_followup_srst_needed() to clean up code and help future sata_mv changes which need clear separation between SCR and TF accesses. sata_fsl is peculiar in that its softreset really isn't softreset but combination of hardreset and softreset. This patch adds dummy private ->prereset to keep the current behavior but the driver really should implement separate hard and soft resets and return -EAGAIN from hardreset if it should be follwed by softreset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-07 10:46:56 -06:00
/* no point in trying softreset on offline link */
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
if (ata_phys_link_offline(link))
libata: move link onlineness check out of softreset methods Currently, SATA softresets should do link onlineness check before actually performing SRST protocol but it doesn't really belong to softreset. This patch moves onlineness check in softreset to ata_eh_reset() and ata_eh_followup_srst_needed() to clean up code and help future sata_mv changes which need clear separation between SCR and TF accesses. sata_fsl is peculiar in that its softreset really isn't softreset but combination of hardreset and softreset. This patch adds dummy private ->prereset to keep the current behavior but the driver really should implement separate hard and soft resets and return -EAGAIN from hardreset if it should be follwed by softreset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-07 10:46:56 -06:00
ehc->i.action &= ~ATA_EH_SOFTRESET;
[PATCH] libata-hp-prep: add prereset() method and implement ata_std_prereset() With hotplug, every reset might be a probing reset and thus something similar to probe_init() is needed. prereset() method is called before a series of resets to a port and is the counterpart of postreset(). prereset() can tell EH to use different type of reset or skip reset by modifying ehc->i.action. This patch also implements ata_std_prereset(). Most controllers should be able to use this function directly or with some wrapping. After hotplug, different controllers need different actions to resume the PHY and detect the newly attached device. Controllers can be categorized as follows. * Controllers which can wait for the first D2H FIS after hotplug. Note that if the waiting is implemented by polling TF status, there needs to be a way to set BSY on PHY status change. It can be implemented by hardware or with the help of the driver. * Controllers which can wait for the first D2H FIS after sending COMRESET. These controllers need to issue COMRESET to wait for the first FIS. Note that the received D2H FIS could be the first D2H FIS after POR (power-on-reset) or D2H FIS in response to the COMRESET. Some controllers use COMRESET as TF status synchronization point and clear TF automatically (sata_sil). * Controllers which cannot wait for the first D2H FIS reliably. Blindly issuing SRST to spinning-up device often results in command issue failure or timeout, causing extended delay. For these controllers, ata_std_prereset() explicitly waits ATA_SPINUP_WAIT (currently 8s) to give newly attached device time to spin up, then issues reset. Note that failing to getting ready in ATA_SPINUP_WAIT is not critical. libata will retry. So, the timeout needs to be long enough to spin up most devices. LLDDs can tell ata_std_prereset() which of above action is needed with ATA_FLAG_HRST_TO_RESUME and ATA_FLAG_SKIP_D2H_BSY flags. These flags are PHY-specific property and will be moved to ata_link later. While at it, this patch unifies function typedef's such that they all have named arguments. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:48 -06:00
return 0;
}
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
/**
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
* sata_link_hardreset - reset link via SATA phy reset
* @link: link to reset
* @timing: timing parameters { interval, duratinon, timeout } in msec
libata: add deadline support to prereset and reset methods Add @deadline to prereset and reset methods and make them honor it. ata_wait_ready() which directly takes @deadline is implemented to be used as the wait function. This patch is in preparation for EH timing improvements. * ata_wait_ready() never does busy sleep. It's only used from EH and no wait in EH is that urgent. This function also prints 'be patient' message automatically after 5 secs of waiting if more than 3 secs is remaining till deadline. * ata_bus_post_reset() now fails with error code if any of its wait fails. This is important because earlier reset tries will have shorter timeout than the spec requires. If a device fails to respond before the short timeout, reset should be retried with longer timeout rather than silently ignoring the device. There are three behavior differences. 1. Timeout is applied to both devices at once, not separately. This is more consistent with what the spec says. 2. When a device passes devchk but fails to become ready before deadline. Previouly, post_reset would just succeed and let device classification remove the device. New code fails the reset thus causing reset retry. After a few times, EH will give up disabling the port. 3. When slave device passes devchk but fails to become accessible (TF-wise) after reset. Original code disables dev1 after 30s timeout and continues as if the device doesn't exist, while the patched code fails reset. When this happens, new code fails reset on whole port rather than proceeding with only the primary device. If the failing device is suffering transient problems, new code retries reset which is a better behavior. If the failing device is actually broken, the net effect is identical to it, but not to the other device sharing the channel. In the previous code, reset would have succeeded after 30s thus detecting the working one. In the new code, reset fails and whole port gets disabled. IMO, it's a pathological case anyway (broken device sharing bus with working one) and doesn't really matter. * ata_bus_softreset() is changed to return error code from ata_bus_post_reset(). It used to return 0 unconditionally. * Spin up waiting is to be removed and not converted to honor deadline. * To be on the safe side, deadline is set to 40s for the time being. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-02 00:50:52 -07:00
* @deadline: deadline jiffies for the operation
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
* @online: optional out parameter indicating link onlineness
* @check_ready: optional callback to check link readiness
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
*
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
* SATA phy-reset @link using DET bits of SControl register.
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
* After hardreset, link readiness is waited upon using
* ata_wait_ready() if @check_ready is specified. LLDs are
* allowed to not specify @check_ready and wait itself after this
* function returns. Device classification is LLD's
* responsibility.
*
* *@online is set to one iff reset succeeded and @link is online
* after reset.
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
unsigned long deadline,
bool *online, int (*check_ready)(struct ata_link *))
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
{
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
u32 scontrol;
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
int rc;
[PATCH] libata: preserve SATA SPD setting over hard resets Don't overwrite SPD setting during hard reset. This change has the (intended) side effect of honoring the BIOS configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
DPRINTK("ENTER\n");
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
if (online)
*online = false;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (sata_set_spd_needed(link)) {
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
/* SATA spec says nothing about how to reconfigure
* spd. To be on the safe side, turn off phy during
* reconfiguration. This works for at least ICH7 AHCI
* and Sil3124.
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
[PATCH] libata: separate out and export sata_port_hardreset() Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 01:59:53 -07:00
goto out;
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
[PATCH] libata: PHY reset requires writing 0x4 to SControl Hi, Reading the Intel VSC and AHCI it seems like writing 0x302 is incorrect. The only valid values are 4, 1 and 0. Writing 4 disables the PHY. Signed-off-by: Martin Hicks <mort@bork.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-05 13:06:13 -06:00
scontrol = (scontrol & 0x0f0) | 0x304;
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_write(link, SCR_CONTROL, scontrol)))
[PATCH] libata: separate out and export sata_port_hardreset() Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 01:59:53 -07:00
goto out;
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
sata_set_spd(link);
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
}
/* issue phy wake/reset */
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_read(link, SCR_CONTROL, &scontrol)))
[PATCH] libata: separate out and export sata_port_hardreset() Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 01:59:53 -07:00
goto out;
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
[PATCH] libata: preserve SATA SPD setting over hard resets Don't overwrite SPD setting during hard reset. This change has the (intended) side effect of honoring the BIOS configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 09:38:18 -07:00
scontrol = (scontrol & 0x0f0) | 0x301;
[PATCH] libata: use new SCR and on/offline functions Use new SCR and on/offline functions. Note that for LLDD which know it implements SCR callbacks, SCR functions are guaranteed to succeed and ata_port_online() == !ata_port_offline(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:47 -06:00
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if ((rc = sata_scr_write_flush(link, SCR_CONTROL, scontrol)))
[PATCH] libata: separate out and export sata_port_hardreset() Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 01:59:53 -07:00
goto out;
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
[PATCH] libata: implement ap->sata_spd_limit and helpers ap->sata_spd_limit contrains SATA PHY speed of the port. It is initialized to the configured value prior to probing thus preserving BIOS configured value. hardreset is responsible for applying SPD limit and sata_std_hardreset() is updated to do that. SATA SPD limit will be used to enhance failure handling during probing and later by EH. This patch also normalizes some comments around affected code. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 05:53:28 -06:00
/* Couldn't find anything in SATA I/II specs, but AHCI-1.1
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
* 10.4.2 says at least 1 ms.
*/
msleep(1);
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
/* bring link back */
rc = sata_link_resume(link, timing, deadline);
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
if (rc)
goto out;
/* if link is offline nothing more to do */
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
if (ata_phys_link_offline(link))
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
goto out;
/* Link is online. From this point, -ENODEV too is an error. */
if (online)
*online = true;
libata: implement PMP helpers Implement helpers to test whether PMP is supported, attached and determine pmp number to use when issuing SRST to a link. While at it, move ata_is_host_link() so that it's together with the two new PMP helpers. This change simplifies LLDs and helps making PMP support optional. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:22 -06:00
if (sata_pmp_supported(link->ap) && ata_is_host_link(link)) {
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
/* If PMP is supported, we have to do follow-up SRST.
* Some PMPs don't send D2H Reg FIS after hardreset if
* the first port is empty. Wait only for
* ATA_TMOUT_PMP_SRST_WAIT.
*/
if (check_ready) {
unsigned long pmp_deadline;
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
pmp_deadline = ata_deadline(jiffies,
ATA_TMOUT_PMP_SRST_WAIT);
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
if (time_after(pmp_deadline, deadline))
pmp_deadline = deadline;
ata_wait_ready(link, pmp_deadline, check_ready);
}
rc = -EAGAIN;
goto out;
}
rc = 0;
if (check_ready)
rc = ata_wait_ready(link, deadline, check_ready);
[PATCH] libata: separate out and export sata_port_hardreset() Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 01:59:53 -07:00
out:
libata: fix sata_link_hardreset() @online out parameter handling The @online out parameter is supposed to set to true iff link is online and reset succeeded as advertised in the function description and callers are coded expecting that. However, sata_link_reset() didn't behave this way on device readiness test failure. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 10:15:05 -06:00
if (rc && rc != -EAGAIN) {
/* online is set iff link is online && reset succeeded */
if (online)
*online = false;
libata: move generic hardreset code from sata_sff_hardreset() to sata_link_hardreset() sata_sff_hardreset() contains link readiness wait logic which isn't SFF specific. Move that part into sata_link_hardreset(), which now takes two more parameters - @online and @check_ready. Both are optional. The former is out parameter for link onlineness after reset. The latter is used to wait for link readiness after hardreset. Users of sata_link_hardreset() is updated to use new funtionality and ahci_hardreset() is updated to use sata_link_hardreset() instead of sata_sff_hardreset(). This doesn't really cause any behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
ata_link_printk(link, KERN_ERR,
"COMRESET failed (errno=%d)\n", rc);
libata: fix sata_link_hardreset() @online out parameter handling The @online out parameter is supposed to set to true iff link is online and reset succeeded as advertised in the function description and callers are coded expecting that. However, sata_link_reset() didn't behave this way on device readiness test failure. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 10:15:05 -06:00
}
[PATCH] libata: separate out and export sata_port_hardreset() Separate out sata_port_hardreset() from sata_std_hardreset(). This will be used by LLD hardreset implementation and later by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 01:59:53 -07:00
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
libata: implement and use sata_std_hardreset() Implement sata_std_hardreset(), which simply wraps around sata_link_hardreset(). sata_std_hardreset() becomes new standard hardreset method for sata_port_ops and sata_sff_hardreset() moves from ata_base_port_ops to ata_sff_port_ops, which is where it really belongs. ata_is_builtin_hardreset() is added so that both ata_std_error_handler() and ata_sff_error_handler() skip both builtin hardresets if SCR isn't accessible. piix_sidpr_hardreset() in ata_piix.c is identical to sata_std_hardreset() in functionality and got replaced with the standard function. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
/**
* sata_std_hardreset - COMRESET w/o waiting or classification
* @link: link to reset
* @class: resulting class of attached device
* @deadline: deadline jiffies for the operation
*
* Standard SATA COMRESET w/o waiting or classification.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 if link offline, -EAGAIN if link online, -errno on errors.
*/
int sata_std_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context);
bool online;
int rc;
/* do hardreset */
rc = sata_link_hardreset(link, timing, deadline, &online, NULL);
return online ? -EAGAIN : rc;
}
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
/**
libata: separate out ata_std_postreset() from ata_sff_postreset() Separate out generic ATA portion from ata_sff_postreset() into ata_std_postreset() and implement ata_sff_postreset() using the std version. ata_base_port_ops now has ata_std_postreset() for its postreset and ata_sff_port_ops overrides it to ata_sff_postreset(). This change affects pdc_adma, ahci, sata_fsl and sata_sil24. pdc_adma now specifies postreset to ata_sff_postreset() explicitly. sata_fsl and sata_sil24 now use ata_std_postreset() which makes no difference to them. ahci now calls ata_std_postreset() from its own postreset method, which causes no behavior difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:18 -06:00
* ata_std_postreset - standard postreset callback
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: the target ata_link
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
* @classes: classes of attached devices
*
* This function is invoked after a successful reset. Note that
* the device might have been reset more than once using
* different reset methods before postreset is invoked.
*
* LOCKING:
* Kernel thread context (may sleep)
*/
libata: separate out ata_std_postreset() from ata_sff_postreset() Separate out generic ATA portion from ata_sff_postreset() into ata_std_postreset() and implement ata_sff_postreset() using the std version. ata_base_port_ops now has ata_std_postreset() for its postreset and ata_sff_port_ops overrides it to ata_sff_postreset(). This change affects pdc_adma, ahci, sata_fsl and sata_sil24. pdc_adma now specifies postreset to ata_sff_postreset() explicitly. sata_fsl and sata_sil24 now use ata_std_postreset() which makes no difference to them. ahci now calls ata_std_postreset() from its own postreset method, which causes no behavior difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:18 -06:00
void ata_std_postreset(struct ata_link *link, unsigned int *classes)
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
{
libata: kill hotplug related race condition Originally, whole reset processing was done while the port is frozen and SError was cleared during @postreset(). This had two race conditions. 1: hotplug could occur after reset but before SError is cleared and libata won't know about it. 2: hotplug could occur after all the reset is complete but before the port is thawed. As all events are cleared on thaw, the hotplug event would be lost. Commit ac371987a81c61c2efbd6931245cdcaf43baad89 kills the first race by clearing SError during link resume but before link onlineness test. However, this doesn't fix race #2 and in some cases clearing SError after SRST is a good idea. This patch solves this problem by cross checking link onlineness with classification result after SError is cleared and port is thawed. Reset is retried if link is online but all devices attached to the link are unknown. As all devices will be revalidated, this one-way check is enough to ensure that all devices are detected and revalidated reliably. This, luckily, also fixes the cases where host controller returns bogus status while harddrive is spinning up after hotplug making classification run before the device sends the first FIS and thus causes misdetection. Low level drivers can bypass the logic by setting class explicitly to ATA_DEV_NONE if ever necessary (currently none requires this). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 10:15:08 -06:00
u32 serror;
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
DPRINTK("ENTER\n");
libata: kill hotplug related race condition Originally, whole reset processing was done while the port is frozen and SError was cleared during @postreset(). This had two race conditions. 1: hotplug could occur after reset but before SError is cleared and libata won't know about it. 2: hotplug could occur after all the reset is complete but before the port is thawed. As all events are cleared on thaw, the hotplug event would be lost. Commit ac371987a81c61c2efbd6931245cdcaf43baad89 kills the first race by clearing SError during link resume but before link onlineness test. However, this doesn't fix race #2 and in some cases clearing SError after SRST is a good idea. This patch solves this problem by cross checking link onlineness with classification result after SError is cleared and port is thawed. Reset is retried if link is online but all devices attached to the link are unknown. As all devices will be revalidated, this one-way check is enough to ensure that all devices are detected and revalidated reliably. This, luckily, also fixes the cases where host controller returns bogus status while harddrive is spinning up after hotplug making classification run before the device sends the first FIS and thus causes misdetection. Low level drivers can bypass the logic by setting class explicitly to ATA_DEV_NONE if ever necessary (currently none requires this). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 10:15:08 -06:00
/* reset complete, clear SError */
if (!sata_scr_read(link, SCR_ERROR, &serror))
sata_scr_write(link, SCR_ERROR, serror);
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
/* print link status */
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
sata_print_link_status(link);
[PATCH] libata: implement standard reset component operations and ->probe_reset Implement SRST, COMRESET and standard postreset component operations for ata_drive_probe_reset(), and use these three functions to implement ata_std_probe_reset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-24 01:05:22 -07:00
DPRINTK("EXIT\n");
}
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
/**
* ata_dev_same_device - Determine whether new ID matches configured device
* @dev: device to compare against
* @new_class: class of the new device
* @new_id: IDENTIFY page of the new device
*
* Compare @new_class and @new_id against @dev and determine
* whether @dev is the device indicated by @new_class and
* @new_id.
*
* LOCKING:
* None.
*
* RETURNS:
* 1 if @dev matches @new_class and @new_id, 0 otherwise.
*/
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
const u16 *new_id)
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
{
const u16 *old_id = dev->id;
libata: straighten out ATA_ID_* constants * Kill _OFS suffixes in ATA_ID_{SERNO|FW_REV|PROD}_OFS for consistency with other ATA_ID_* constants. * Kill ATA_SERNO_LEN * Add and use ATA_ID_SERNO_LEN, ATA_ID_FW_REV_LEN and ATA_ID_PROD_LEN. This change also makes ata_device_blacklisted() use proper length for fwrev. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-02 04:18:49 -07:00
unsigned char model[2][ATA_ID_PROD_LEN + 1];
unsigned char serial[2][ATA_ID_SERNO_LEN + 1];
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
if (dev->class != new_class) {
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n",
dev->class, new_class);
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
return 0;
}
libata: straighten out ATA_ID_* constants * Kill _OFS suffixes in ATA_ID_{SERNO|FW_REV|PROD}_OFS for consistency with other ATA_ID_* constants. * Kill ATA_SERNO_LEN * Add and use ATA_ID_SERNO_LEN, ATA_ID_FW_REV_LEN and ATA_ID_PROD_LEN. This change also makes ata_device_blacklisted() use proper length for fwrev. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-02 04:18:49 -07:00
ata_id_c_string(old_id, model[0], ATA_ID_PROD, sizeof(model[0]));
ata_id_c_string(new_id, model[1], ATA_ID_PROD, sizeof(model[1]));
ata_id_c_string(old_id, serial[0], ATA_ID_SERNO, sizeof(serial[0]));
ata_id_c_string(new_id, serial[1], ATA_ID_SERNO, sizeof(serial[1]));
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
if (strcmp(model[0], model[1])) {
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
ata_dev_printk(dev, KERN_INFO, "model number mismatch "
"'%s' != '%s'\n", model[0], model[1]);
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
return 0;
}
if (strcmp(serial[0], serial[1])) {
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
ata_dev_printk(dev, KERN_INFO, "serial number mismatch "
"'%s' != '%s'\n", serial[0], serial[1]);
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
return 0;
}
return 1;
}
/**
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
* ata_dev_reread_id - Re-read IDENTIFY data
kerneldoc fix in libata Fix parameter name from ata_dev_reread_id() in libata-core.c for kerneldoc. Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-19 02:10:50 -06:00
* @dev: target ATA device
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
* @readid_flags: read ID flags
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
*
* Re-read IDENTIFY page and make sure @dev is still attached to
* the port.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, negative errno otherwise
*/
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags)
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
{
[PATCH] libata: ata_dev_revalidate() printk update Make sure ata_dev_revalidate() complains on failures and kill revalidation failure message printed from ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:52 -06:00
unsigned int class = dev->class;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
u16 *id = (void *)dev->link->ap->sector_buf;
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
int rc;
[PATCH] libata: use preallocated buffers It's not a very good idea to allocate memory during EH. Use statically allocated buffer for dev->id[] and add 512byte buffer ap->sector_buf. This buffer is owned by EH (or probing) and to be used as temporary buffer for various purposes (IDENTIFY, NCQ log page 10h, PM GSCR block). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:35 -06:00
/* read ID data */
[PATCH] libata: convert @post_reset to @flags in ata_dev_read_id() Make ata_dev_read_id() take @flags instead of @post_reset. Currently there is only one flag defined - ATA_READID_POSTRESET, which is equivalent to @post_reset. This is preparation for polling presence detection. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-10 02:08:10 -07:00
rc = ata_dev_read_id(dev, &class, readid_flags, id);
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
if (rc)
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
return rc;
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
/* is the device still there? */
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
if (!ata_dev_same_device(dev, class, id))
return -ENODEV;
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
[PATCH] libata: use preallocated buffers It's not a very good idea to allocate memory during EH. Use statically allocated buffer for dev->id[] and add 512byte buffer ap->sector_buf. This buffer is owned by EH (or probing) and to be used as temporary buffer for various purposes (IDENTIFY, NCQ log page 10h, PM GSCR block). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:35 -06:00
memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
return 0;
}
/**
* ata_dev_revalidate - Revalidate ATA device
* @dev: device to revalidate
libata-pmp-prep: add @new_class to ata_dev_revalidate() Consider newly found class code while revalidating. PMP resetting always results in valid class code and issuing PMP commands to ATA/ATAPI device isn't very attractive. Add @new_class to ata_dev_revalidate() and check class code for revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
* @new_class: new class code
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
* @readid_flags: read ID flags
*
* Re-read IDENTIFY page, make sure @dev is still attached to the
* port and reconfigure it according to the new IDENTIFY page.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, negative errno otherwise
*/
libata-pmp-prep: add @new_class to ata_dev_revalidate() Consider newly found class code while revalidating. PMP resetting always results in valid class code and issuing PMP commands to ATA/ATAPI device isn't very attractive. Add @new_class to ata_dev_revalidate() and check class code for revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
unsigned int readid_flags)
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
{
libata: during revalidation, check n_sectors after device is configured Device might be resized during ata_dev_configure() due to HPA or (later) ACPI _GTF. Currently it's worked around by caching n_sectors before turning off HPA. The cached original size is overwritten if the device is reconfigured without being hardreset - which always happens after configuring trasnfer mode. If the device gets hardreset for some reason after that, revalidation fails with -ENODEV. This patch makes size checking more robust by moving n_sectors check from ata_dev_reread_id() to ata_dev_revalidate() after the device is fully configured. No matter what happens during configuration, a device must have the same n_sectors after fully configured to be treated as the same device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
u64 n_sectors = dev->n_sectors;
libata: accept late unlocking of HPA On certain configurations, HPA isn't or can't be unlocked during probing but it somehow ends up unlocked afterwards. In the following thread, the problem can be reliably reproduced after resuming from STR. The BIOS turns on HPA during boot but forgets to do it during resume. http://thread.gmane.org/gmane.linux.kernel/858310 This patch updates libata revalidation such that it considers native n_sectors. If the device size has increased to match native n_sectors, it's assumed that HPA has been unlocked involuntarily and the device is recognized as the same one. This should be fairly safe while nicely working around the problem. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christof Warlich <christof@warlich.name> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-15 02:11:41 -06:00
u64 n_native_sectors = dev->n_native_sectors;
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
int rc;
if (!ata_dev_enabled(dev))
return -ENODEV;
libata-pmp-prep: add @new_class to ata_dev_revalidate() Consider newly found class code while revalidating. PMP resetting always results in valid class code and issuing PMP commands to ATA/ATAPI device isn't very attractive. Add @new_class to ata_dev_revalidate() and check class code for revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
if (ata_class_enabled(new_class) &&
libata: fix suspend/resume for ATA SEMB devices 79b42babbac2a5a522b8e269fb2811b6e1063030 fixed identifying ATA devices reporting 3c/c3 signature which belongs to SEMB devices now. However, suspending the machine with such device (WDC WD2500AAJS-6 01.0) fails with the following: hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hda: UDMA/100 mode selected hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 hdb: UDMA/66 mode selected sd 1:0:0:0: [sda] Starting disk ata5: SATA link down (SStatus 0 SControl 300) ata1: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 0 SControl 300) ata6: SATA link down (SStatus 0 SControl 300) ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata4: softreset failed (device not ready) ata4: failed due to HW bug, retry pmp=0 ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2: limiting SATA link speed to 1.5 Gbps ata4.00: configured for UDMA/133 ata2: softreset failed (device not ready) ata2: failed due to HW bug, retry pmp=0 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) ata2.00: class mismatch 1 != 7 ata2.00: revalidation failed (errno=-19) ata2.00: disabled sd 1:0:0:0: rejecting I/O to offline device sd 1:0:0:0: [sda] START_STOP FAILED sd 1:0:0:0: [sda] Result: hostbyte=0x01 driverbyte=0x00 PM: Device 1:0:0:0 failed to thaw: error 65536 sd 3:0:0:0: [sdb] Starting disk due to a class mismatch in ata_dev_revalidate(). Fix it by adding the ATA_DEV_SEMB device class to the check. CC: Tejun Heo <htejun@gmail.com> Signed-off-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-26 08:33:34 -06:00
new_class != ATA_DEV_ATA &&
new_class != ATA_DEV_ATAPI &&
new_class != ATA_DEV_SEMB) {
libata-pmp-prep: add @new_class to ata_dev_revalidate() Consider newly found class code while revalidating. PMP resetting always results in valid class code and issuing PMP commands to ATA/ATAPI device isn't very attractive. Add @new_class to ata_dev_revalidate() and check class code for revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
dev->class, new_class);
rc = -ENODEV;
goto fail;
}
libata: separate out ata_dev_reread_id() Separate out ata_dev_reread_id() from ata_dev_revalidate(). ata_dev_reread_id() reads IDENTIFY page and determines whether the same device is still there. ata_dev_revalidate() reconfigures after reread completes. This will be used by ACPI update. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
/* re-read ID */
rc = ata_dev_reread_id(dev, readid_flags);
if (rc)
goto fail;
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
/* configure device according to the new ID */
[PATCH] libata: implement ATA_EHI_PRINTINFO Implement ehi flag ATA_EHI_PRINTINFO. This flag is set when device configuration needs to print out device info. This used to be handled by @print_info argument to ata_dev_configure() but LLDs also need to know about it in ->dev_config() callback. This patch replaces @print_info w/ ATA_EHI_PRINTINFO and make sata_sil print workaround messages only on the initial configuration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-01 02:38:52 -07:00
rc = ata_dev_configure(dev);
libata: during revalidation, check n_sectors after device is configured Device might be resized during ata_dev_configure() due to HPA or (later) ACPI _GTF. Currently it's worked around by caching n_sectors before turning off HPA. The cached original size is overwritten if the device is reconfigured without being hardreset - which always happens after configuring trasnfer mode. If the device gets hardreset for some reason after that, revalidation fails with -ENODEV. This patch makes size checking more robust by moving n_sectors check from ata_dev_reread_id() to ata_dev_revalidate() after the device is fully configured. No matter what happens during configuration, a device must have the same n_sectors after fully configured to be treated as the same device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
if (rc)
goto fail;
/* verify n_sectors hasn't changed */
libata: don't check n_sectors during revalidation if zero If the initial configuration fails early, n_sectors is left at zero. Checking against it during revalidation makes retried configuration fail due to n_sectors mismatch. Ignore zero n_sectors during revalidation. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-17 03:46:51 -06:00
if (dev->class == ATA_DEV_ATA && n_sectors &&
dev->n_sectors != n_sectors) {
libata: accept late unlocking of HPA On certain configurations, HPA isn't or can't be unlocked during probing but it somehow ends up unlocked afterwards. In the following thread, the problem can be reliably reproduced after resuming from STR. The BIOS turns on HPA during boot but forgets to do it during resume. http://thread.gmane.org/gmane.linux.kernel/858310 This patch updates libata revalidation such that it considers native n_sectors. If the device size has increased to match native n_sectors, it's assumed that HPA has been unlocked involuntarily and the device is recognized as the same one. This should be fairly safe while nicely working around the problem. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christof Warlich <christof@warlich.name> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-15 02:11:41 -06:00
ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
libata: during revalidation, check n_sectors after device is configured Device might be resized during ata_dev_configure() due to HPA or (later) ACPI _GTF. Currently it's worked around by caching n_sectors before turning off HPA. The cached original size is overwritten if the device is reconfigured without being hardreset - which always happens after configuring trasnfer mode. If the device gets hardreset for some reason after that, revalidation fails with -ENODEV. This patch makes size checking more robust by moving n_sectors check from ata_dev_reread_id() to ata_dev_revalidate() after the device is fully configured. No matter what happens during configuration, a device must have the same n_sectors after fully configured to be treated as the same device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
"%llu != %llu\n",
(unsigned long long)n_sectors,
(unsigned long long)dev->n_sectors);
libata: accept late unlocking of HPA On certain configurations, HPA isn't or can't be unlocked during probing but it somehow ends up unlocked afterwards. In the following thread, the problem can be reliably reproduced after resuming from STR. The BIOS turns on HPA during boot but forgets to do it during resume. http://thread.gmane.org/gmane.linux.kernel/858310 This patch updates libata revalidation such that it considers native n_sectors. If the device size has increased to match native n_sectors, it's assumed that HPA has been unlocked involuntarily and the device is recognized as the same one. This should be fairly safe while nicely working around the problem. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Christof Warlich <christof@warlich.name> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-15 02:11:41 -06:00
/*
* Something could have caused HPA to be unlocked
* involuntarily. If n_native_sectors hasn't changed
* and the new size matches it, keep the device.
*/
if (dev->n_native_sectors == n_native_sectors &&
dev->n_sectors > n_sectors &&
dev->n_sectors == n_native_sectors) {
ata_dev_printk(dev, KERN_WARNING,
"new n_sectors matches native, probably "
"late HPA unlock, continuing\n");
/* keep using the old n_sectors */
dev->n_sectors = n_sectors;
} else {
/* restore original n_[native]_sectors and fail */
dev->n_native_sectors = n_native_sectors;
dev->n_sectors = n_sectors;
rc = -ENODEV;
goto fail;
}
libata: during revalidation, check n_sectors after device is configured Device might be resized during ata_dev_configure() due to HPA or (later) ACPI _GTF. Currently it's worked around by caching n_sectors before turning off HPA. The cached original size is overwritten if the device is reconfigured without being hardreset - which always happens after configuring trasnfer mode. If the device gets hardreset for some reason after that, revalidation fails with -ENODEV. This patch makes size checking more robust by moving n_sectors check from ata_dev_reread_id() to ata_dev_revalidate() after the device is fully configured. No matter what happens during configuration, a device must have the same n_sectors after fully configured to be treated as the same device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:15 -06:00
}
return 0;
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
fail:
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc);
[PATCH] libata: implement ata_dev_revalidate() ata_dev_revalidate() re-reads IDENTIFY PAGE of the given device and makes sure it's the same device as the configured one. Once it's verified that it's the same device, @dev is configured according to newly read IDENTIFY PAGE. Note that revalidation currently doesn't invoke transfer mode reconfiguration. Criteria for 'same device' * same class (of course) * same model string * same serial string * if ATA, same n_sectors (to catch geometry parameter changes) Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 01:55:58 -07:00
return rc;
}
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
struct ata_blacklist_entry {
const char *model_num;
const char *model_rev;
unsigned long horkage;
};
static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Devices with DMA related problems under Linux */
{ "WDC AC11000H", NULL, ATA_HORKAGE_NODMA },
{ "WDC AC22100H", NULL, ATA_HORKAGE_NODMA },
{ "WDC AC32500H", NULL, ATA_HORKAGE_NODMA },
{ "WDC AC33100H", NULL, ATA_HORKAGE_NODMA },
{ "WDC AC31600H", NULL, ATA_HORKAGE_NODMA },
{ "WDC AC32100H", "24.09P07", ATA_HORKAGE_NODMA },
{ "WDC AC23200L", "21.10N21", ATA_HORKAGE_NODMA },
{ "Compaq CRD-8241B", NULL, ATA_HORKAGE_NODMA },
{ "CRD-8400B", NULL, ATA_HORKAGE_NODMA },
{ "CRD-8480B", NULL, ATA_HORKAGE_NODMA },
{ "CRD-8482B", NULL, ATA_HORKAGE_NODMA },
{ "CRD-84", NULL, ATA_HORKAGE_NODMA },
{ "SanDisk SDP3B", NULL, ATA_HORKAGE_NODMA },
{ "SanDisk SDP3B-64", NULL, ATA_HORKAGE_NODMA },
{ "SANYO CD-ROM CRD", NULL, ATA_HORKAGE_NODMA },
{ "HITACHI CDR-8", NULL, ATA_HORKAGE_NODMA },
{ "HITACHI CDR-8335", NULL, ATA_HORKAGE_NODMA },
{ "HITACHI CDR-8435", NULL, ATA_HORKAGE_NODMA },
{ "Toshiba CD-ROM XM-6202B", NULL, ATA_HORKAGE_NODMA },
{ "TOSHIBA CD-ROM XM-1702BC", NULL, ATA_HORKAGE_NODMA },
{ "CD-532E-A", NULL, ATA_HORKAGE_NODMA },
{ "E-IDE CD-ROM CR-840",NULL, ATA_HORKAGE_NODMA },
{ "CD-ROM Drive/F5A", NULL, ATA_HORKAGE_NODMA },
{ "WPI CDD-820", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SC-148C", NULL, ATA_HORKAGE_NODMA },
{ "SAMSUNG CD-ROM SC", NULL, ATA_HORKAGE_NODMA },
{ "ATAPI CD-ROM DRIVE 40X MAXIMUM",NULL,ATA_HORKAGE_NODMA },
{ "_NEC DV5800A", NULL, ATA_HORKAGE_NODMA },
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
{ "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
libata: Add Seagate STT20000A to DMA blacklist. http://bugzilla.kernel.org/show_bug.cgi?id=1044 points out an additional hard disk that doesn't handle DMA transfers correctly. This patch is the libata variant of the earlier patch to drivers/ide/ Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21 12:31:03 -06:00
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
libata-pmp: implement Port Multiplier support Implement Port Multiplier support. To support PMP, a LLDD has to supply ops->pmp_read() and pmp_write(). If non-null, ->pmp_attach and ->pmp_detach are called on PMP attach and detach, respectively. ->pmp_read/write() can be called while the port is frozen, so they must be implemented by polling. This patch supplies several helpers to ease ->pmp_read/write() implementation. Also, irq_handler and error_handler must be PMP aware. Most of PMP aware EH can be done by calling ata_pmp_do_eh() with appropriate methods. PMP EH uses separate set of reset methods and this patch implements standard prereset, hardreset and postreset methods. This patch only implements PMP support. The next patch will integrate PMP into the reset of libata and thus enable PMP support. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
/* Odd clown on sil3726/4726 PMPs */
libata: ignore SIMG4726 config pseudo device I was hoping ATA_HORKAGE_NODMA | ATA_HORKAGE_SKIP_PM could keep it happy but no even this doesn't work under certain configurations and it's not like we can do anything useful with the cofig device anyway. Replace ATA_HORKAGE_SKIP_PM with ATA_HORKAGE_DISABLE and use it for the config device. This makes the device completely ignored by libata. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-18 10:15:14 -06:00
{ "Config Disk", NULL, ATA_HORKAGE_DISABLE },
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
libata: Limit max sector to 128 for TORiSAN DVD drives (take 3) patch 3/4: The TORiSAN drive locks up when max sector == 256. Limit max sector to 128 for the TORiSAN DRD-N216 drives. (http://bugzilla.kernel.org/show_bug.cgi?id=6710) Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-01 21:34:15 -06:00
/* Weird ATAPI devices */
libata: kill ATA_HORKAGE_DMA_RW_ONLY ATA_HORKAGE_DMA_RW_ONLY for TORiSAN is verified to be subset of using DMA for ATAPI commands which aren't aligned to 16 bytes. As libata now doesn't use DMA for unaligned ATAPI commands, the horkage is redundant. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-06-26 11:49:38 -06:00
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it libata always uses PIO for ATAPI commands when the number of bytes to transfer isn't multiple of 16 but quantum DAT72 chokes on odd bytes PIO transfers. Implement a horkage to skip the mod16 check and apply it to the quantum device. This is reported by John Clark in the following thread. http://thread.gmane.org/gmane.linux.ide/34748 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: John Clark <clarkjc@runbox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 03:01:09 -07:00
{ "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA },
libata: Limit max sector to 128 for TORiSAN DVD drives (take 3) patch 3/4: The TORiSAN drive locks up when max sector == 256. Limit max sector to 128 for the TORiSAN DRD-N216 drives. (http://bugzilla.kernel.org/show_bug.cgi?id=6710) Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-01 21:34:15 -06:00
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
/* Devices we expect to fail diagnostics */
/* Devices where NCQ should be avoided */
/* NCQ is slow */
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
libata: kill spurious NCQ completion detection Spurious NCQ completion detection implemented in ahci was incorrect. On AHCI receving and processing FISes and raising interrupts are not interlocked and spurious interrupts are expected. For example, if an interrupt occurs while interrupt handler is running and the running interrupt handler handles the event the new IRQ indicated, after IRQ handler finishes, it will be executed again because IRQ pending bit is set by the new interrupt but there won't be anything to process. Please read the following message for more information. http://article.gmane.org/gmane.linux.ide/26012 This patch... * Removes all spurious IRQ whining from ahci. Spurious NCQ completion detection was completely wrong. Spurious D2H Register FIS taught us that some early drives send spurious D2H Register FIS with I bit set while NCQ commands are in progress but none of recent drives does that and even the ones which show such behavior can do NCQ fine. * Kills all NCQ blacklist entries which were added because of spurious NCQ completions. I tracked down each commit and verified all removed ones are actually added because of spurious completions. WD740ADFD-00NLR1 wasn't deleted but moved upward because the drive not only had spurious NCQ completions but also is slow on sequential data transfers if NCQ is enabled. Maxtor 7V300F0 was added by 0e3dbc01d53940fe10e5a5cfec15ede3e929c918 from Alan Cox. I can only find evidences that the drive only had troubles with spuruious completions by searching the mailing list. This entry needs to be verified and removed if it doesn't have other NCQ related problems. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-06 20:46:23 -07:00
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
libata: blacklist FUJITSU MHT2060BH for NCQ Blacklist FUJITSU MHT2060BH for NCQ. On this drive, NCQ works iff queue depth is equal to or less than 4. Just turn it off. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mike Accetta <maccetta@laurelnetworks.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 23:21:23 -07:00
/* http://thread.gmane.org/gmane.linux.ide/14907 */
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
ata: NCQ is broken on Maxtor 6L250S0 With this applied, my machine has stopped all those painful messages. dmesg now says : root@riri:/Kernels# dmesg | grep LBA ata1.00: 490234752 sectors, multi 0: LBA48 NCQ (not used) ata2.00: 640 sectors, multi 1: LBA ata3.00: 490234752 sectors, multi 0: LBA48 NCQ (not used) Signed-off-by: Paul Rolland <rol@as2917.net> Acked-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-26 23:43:44 -06:00
/* NCQ is broken */
[libata] blacklist Maxtor*BANC* using new wildcard blacklist matching Support the use of '*' in model_num and model_rev entries in ata_device_blacklist[]. Based largely on David Milburn's "libata-core: support wildcard matching in ata_blacklist_entry" patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20 14:31:47 -06:00
{ "Maxtor *", "BANC*", ATA_HORKAGE_NONCQ },
libata: Update the blacklist with a few more devices Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20 08:22:47 -06:00
{ "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ },
libata: blacklist NCQ on Seagate Barracuda ST380817AS Seagate Barracuda ST380817AS has troubles with NCQ. For example, unpacking a tarball on an XFS filesystem gives this: ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen ata1.00: cmd 61/40:00:29:a3:98/00:00:00:00:00/40 tag 0 cdb 0x0 data 32768 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) More info here: http://lkml.org/lkml/2007/1/21/76 Blacklist it! Signed-off-by: Paolo Ornati <ornati@fastwebnet.it> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-03 20:06:56 -06:00
{ "ST380817AS", "3.42", ATA_HORKAGE_NONCQ },
libata: add ST3160023AS / 3.42 to NCQ blacklist Like ST380817AS / 3.42, ST3160023AS / 3.42 times out commands if NCQ is used. Blacklist it. This is reported by Matheus Izvekov in the following thread. http://thread.gmane.org/gmane.linux.ide/24202 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Matheus Izvekov <mizvekov@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-09 03:45:39 -07:00
{ "ST3160023AS", "3.42", ATA_HORKAGE_NONCQ },
libata: blacklist NCQ on OCZ CORE 2 SSD (resend) The patchlet below blacklists NCQ on OCZ CORE v2 SSD drive(s). Even though the drive advertises NCQ support with queue depth 1, it responds with all-zeroes FIS to NCQ commands which triggers ata error handling several times before the kernel decides to disable NCQ on the drive. Signed-off-by: Lubomir Bulej <lubomir.bulej@dsrg.mff.cuni.cz> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-22 03:35:22 -07:00
{ "OCZ CORE_SSD", "02.10104", ATA_HORKAGE_NONCQ },
[libata] blacklist Maxtor*BANC* using new wildcard blacklist matching Support the use of '*' in model_num and model_rev entries in ata_device_blacklist[]. Based largely on David Milburn's "libata-core: support wildcard matching in ata_blacklist_entry" patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20 14:31:47 -06:00
libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-26 21:36:48 -07:00
/* Seagate NCQ + FLUSH CACHE firmware bug */
libata: fix Seagate NCQ+FLUSH blacklist Due to miscommunication, P/N was mistaken as firmware revision strings. Update it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-10 21:42:42 -07:00
{ "ST31500341AS", "SD15", ATA_HORKAGE_NONCQ |
libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-26 21:36:48 -07:00
ATA_HORKAGE_FIRMWARE_WARN },
libata: fix Seagate NCQ+FLUSH blacklist Due to miscommunication, P/N was mistaken as firmware revision strings. Update it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-10 21:42:42 -07:00
{ "ST31500341AS", "SD16", ATA_HORKAGE_NONCQ |
libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-26 21:36:48 -07:00
ATA_HORKAGE_FIRMWARE_WARN },
libata: fix Seagate NCQ+FLUSH blacklist Due to miscommunication, P/N was mistaken as firmware revision strings. Update it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-10 21:42:42 -07:00
{ "ST31500341AS", "SD17", ATA_HORKAGE_NONCQ |
libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-26 21:36:48 -07:00
ATA_HORKAGE_FIRMWARE_WARN },
libata: fix Seagate NCQ+FLUSH blacklist Due to miscommunication, P/N was mistaken as firmware revision strings. Update it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-10 21:42:42 -07:00
{ "ST31500341AS", "SD18", ATA_HORKAGE_NONCQ |
libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-26 21:36:48 -07:00
ATA_HORKAGE_FIRMWARE_WARN },
libata: fix Seagate NCQ+FLUSH blacklist Due to miscommunication, P/N was mistaken as firmware revision strings. Update it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-10 21:42:42 -07:00
{ "ST31500341AS", "SD19", ATA_HORKAGE_NONCQ |
libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-26 21:36:48 -07:00
ATA_HORKAGE_FIRMWARE_WARN },
libata: fix Seagate NCQ+FLUSH blacklist Due to miscommunication, P/N was mistaken as firmware revision strings. Update it. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-10 21:42:42 -07:00
{ "ST31000333AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST31000333AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640623AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3640323AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320813AS", "SD19", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD15", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD16", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD17", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD18", ATA_HORKAGE_NONCQ |
ATA_HORKAGE_FIRMWARE_WARN },
{ "ST3320613AS", "SD19", ATA_HORKAGE_NONCQ |
libata: blacklist Seagate drives which time out FLUSH_CACHE when used with NCQ Some recent Seagate harddrives have firmware bug which causes FLUSH CACHE to timeout under certain circumstances if NCQ is being used. This can be worked around by disabling NCQ and fixed by updating the firmware. Implement ATA_HORKAGE_FIRMWARE_UPDATE and blacklist these devices. The wiki page has been updated to contain information on this issue. http://ata.wiki.kernel.org/index.php/Known_issues Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-26 21:36:48 -07:00
ATA_HORKAGE_FIRMWARE_WARN },
[PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver (v2) This adds some NCQ blacklist entries taken from the Silicon Image 3124/3132 Windows driver .inf files. There are some confirming reports of problems with these drives under Linux (for example http://lkml.org/lkml/2007/3/4/178) so let's disable NCQ on these drives. [ I'm personally starting to wonder whether we shouldn't disable NCQ by default, and perhaps have a white-list. There seems to be a *lot* of drives that do this wrong.. - Linus ] Signed-off-by: Robert Hancock <hancockr@shaw.ca> Acked-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-04-02 22:05:29 -06:00
/* Blacklist entries taken from Silicon Image 3124/3132
Windows driver .inf file - also several Linux problem reports */
{ "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541080G9SA00", "MB4OC60D", ATA_HORKAGE_NONCQ, },
{ "HTS541010G9SA00", "MBZOC60D", ATA_HORKAGE_NONCQ, },
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
libata: implement BROKEN_HPA horkage and apply it to affected drives Some drives choke on READ_NATIVE_MAX_ADDRESS[_EXT]. Implement ATA_HORKAGE_BROKEN_HPA and apply it to affected drives. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-28 20:58:33 -06:00
/* devices which puke on READ_NATIVE_MAX */
{ "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, },
{ "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA },
{ "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA },
{ "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA },
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
libata: OCZ Vertex can't do HPA OCZ Vertex SSD can't do HPA and not in a usual way. It reports HPA, allows unlocking but then fails all IOs which fall in the unlocked area. Quirk it so that HPA unlocking is not used for the device. Reported by Daniel Perup in bnc#522414. https://bugzilla.novell.com/show_bug.cgi?id=522414 Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Daniel Perup <probe@spray.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-06 10:59:15 -06:00
/* this one allows HPA unlocking but fails IOs on the area */
{ "OCZ-VERTEX", "1.30", ATA_HORKAGE_BROKEN_HPA },
[PATCH] libata: Fix HPA handling regression Restore the support for handling drives that report one sector too many (ie SCSI not ATA style). This worked before the HPA update but was removed in that process. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-29 02:06:48 -06:00
/* Devices which report 1 sector over size HPA */
{ "ST340823A", NULL, ATA_HORKAGE_HPA_SIZE, },
{ "ST320413A", NULL, ATA_HORKAGE_HPA_SIZE, },
ide/libata: ST310211A has buggy HPA too Signed-off-by: Mikko Rapeli <mikko.rapeli@teleca.com> Tested-by: Bart Champagne <bart@as35701.net> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-18 17:41:25 -07:00
{ "ST310211A", NULL, ATA_HORKAGE_HPA_SIZE, },
[PATCH] libata: Fix HPA handling regression Restore the support for handling drives that report one sector too many (ie SCSI not ATA style). This worked before the HPA update but was removed in that process. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-29 02:06:48 -06:00
libata: handle broken cable reporting One or two ancient drives predated the cable spec and didn't sent the valid bits for the field. I had hoped to leave this out of libata as a piece of historical annoyance but a recent CD drive shows the same bug so we have to import support for it. Same concept as Bartlomiej's changes old IDE except that as we have centralised blacklists we can avoid keeping another private table of stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05 15:58:58 -07:00
/* Devices which get the IVB wrong */
{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
libata: More TSSTcorp pain, keep in sync with legacy IDE Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-29 07:08:36 -06:00
/* Maybe we should just blacklist TSSTcorp... */
{ "TSSTcorp CDDVDW SH-S202H", "SB00", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202H", "SB01", ATA_HORKAGE_IVB, },
libata: handle broken cable reporting One or two ancient drives predated the cable spec and didn't sent the valid bits for the field. I had hoped to leave this out of libata as a piece of historical annoyance but a recent CD drive shows the same bug so we have to import support for it. Same concept as Bartlomiej's changes old IDE except that as we have centralised blacklists we can avoid keeping another private table of stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05 15:58:58 -07:00
{ "TSSTcorp CDDVDW SH-S202J", "SB00", ATA_HORKAGE_IVB, },
libata: More IVB horkage from TSST libata: Add more TSST (Samsung/Toshiba) IDE drives with broken cable detection validation bits. signed-off-by: Peter Missel (peter.missel@onlinehome.de) Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 10:04:42 -07:00
{ "TSSTcorp CDDVDW SH-S202J", "SB01", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202N", "SB00", ATA_HORKAGE_IVB, },
{ "TSSTcorp CDDVDW SH-S202N", "SB01", ATA_HORKAGE_IVB, },
libata: handle broken cable reporting One or two ancient drives predated the cable spec and didn't sent the valid bits for the field. I had hoped to leave this out of libata as a piece of historical annoyance but a recent CD drive shows the same bug so we have to import support for it. Same concept as Bartlomiej's changes old IDE except that as we have centralised blacklists we can avoid keeping another private table of stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05 15:58:58 -07:00
libata: add whitelist for devices with known good pata-sata bridges libata currently imposes a UDMA5 max transfer rate and 200 sector max transfer size for SATA devices that sit behind a pata-sata bridge. Lots of devices have known good bridges that don't need this limit applied. The MTRON SSD disks are such devices. Transfer rates are increased by 20-30% with the restriction removed. So add a "blacklist" entry for the MTRON devices, with a flag indicating that the bridge is known good. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-27 07:23:18 -06:00
/* Devices that do not need bridging limits applied */
{ "MTRON MSP-SATA*", NULL, ATA_HORKAGE_BRIDGE_OK, },
libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book 3Gbps is often much more prone to transmission failures. It's usually okay to let EH handle speed down after transmission failures but some WD My Book drives completely shutdown after certain transmission failures and after it only power cycling can revive them. Combined with the fact that external drives often end up with cable assembly which is longer than usual and more likely to have intervening gender, this makes these drives very likely to shutdown under certain configurations virtually rendering them unusable. This patch implements HOARKGE_1_5_GBPS and applies it to WD My Book such that 1.5Gbps is forced once the device is identified. Please take a look at the following bz for related reports. http://bugzilla.kernel.org/show_bug.cgi?id=9913 Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:36 -07:00
/* Devices which aren't very happy with higher link speeds */
{ "WD My Book", NULL, ATA_HORKAGE_1_5_GBPS, },
libata: implement and use HORKAGE_NOSETXFER, take#2 PIONEER DVD-RW DVRTD08 times out SETXFER if no media is present. The device is SATA and simply skipping SETXFER works around the problem. Implement ATA_HORKAGE_NOSETXFER and apply it to the device. Reported by Moritz Rigler in the following thread. http://thread.gmane.org/gmane.linux.ide/36790 and by Lars in bko#9540. Updated to whine and ignore NOSETXFER if PATA component is detected as suggested by Alan Cox. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Moritz Rigler <linux-ide@momail.e4ward.com> Reported-by: Lars <lars21ce@gmx.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-08 18:27:50 -06:00
/*
* Devices which choke on SETXFER. Applies only if both the
* device and controller are SATA.
*/
{ "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER },
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
/* End Marker */
{ }
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
};
[libata] export ata_dev_pair; trim trailing whitespace Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 07:56:57 -07:00
libata-core.c: make 2 functions static strn_pattern_cmp() and ata_port_detach() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-24 10:23:06 -06:00
static int strn_pattern_cmp(const char *patt, const char *name, int wildchar)
[libata] blacklist Maxtor*BANC* using new wildcard blacklist matching Support the use of '*' in model_num and model_rev entries in ata_device_blacklist[]. Based largely on David Milburn's "libata-core: support wildcard matching in ata_blacklist_entry" patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20 14:31:47 -06:00
{
const char *p;
int len;
/*
* check for trailing wildcard: *\0
*/
p = strchr(patt, wildchar);
if (p && ((*(p + 1)) == 0))
len = p - patt;
libata: prevent devices with blank model names from being DMA blacklisted The strn_pattern_cmp routine does not handle a blank name parameter properly. The only patterns which should match a blank name are "*" and an explicit "". If the function is passed a blank name in current code, it will always match against the patt parameter. The bug manifests itself as the device with the empty model name always matching the first device in the DMA blacklist, forcing it to revert to PIO mode. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-15 13:43:12 -06:00
else {
[libata] blacklist Maxtor*BANC* using new wildcard blacklist matching Support the use of '*' in model_num and model_rev entries in ata_device_blacklist[]. Based largely on David Milburn's "libata-core: support wildcard matching in ata_blacklist_entry" patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20 14:31:47 -06:00
len = strlen(name);
libata: prevent devices with blank model names from being DMA blacklisted The strn_pattern_cmp routine does not handle a blank name parameter properly. The only patterns which should match a blank name are "*" and an explicit "". If the function is passed a blank name in current code, it will always match against the patt parameter. The bug manifests itself as the device with the empty model name always matching the first device in the DMA blacklist, forcing it to revert to PIO mode. Signed-off-by: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-15 13:43:12 -06:00
if (!len) {
if (!*patt)
return 0;
return -1;
}
}
[libata] blacklist Maxtor*BANC* using new wildcard blacklist matching Support the use of '*' in model_num and model_rev entries in ata_device_blacklist[]. Based largely on David Milburn's "libata-core: support wildcard matching in ata_blacklist_entry" patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20 14:31:47 -06:00
return strncmp(patt, name, len);
}
libata: clean up horkage handling Horkage handling had the following problems. * dev->horkage was positioned after ATA_DEVICE_CLEAR_OFFSET, so it was cleared before the device is configured. This broke HORKAGE_DIAGNOSTIC. * Some used dev->horkage while others called ata_device_blacklisted() directly. This was at best confusing. This patch moves dev->horkage right after dev->flags and set the field according to the blacklist during device configuration. All users test against dev->horkage. ata_device_blacklisted() now has only one user, make it static. While at it, rename it to ata_dev_blacklisted() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-04 22:31:27 -06:00
static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
libata: use ata_id_c_string() There were several places where ATA ID strings are manually terminated and in some places possibly unterminated strings were passed to string functions which don't limit length like strstr(). This patch converts all of them over to ata_id_c_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-02 04:19:40 -07:00
unsigned char model_num[ATA_ID_PROD_LEN + 1];
unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
const struct ata_blacklist_entry *ad = ata_device_blacklist;
[PATCH] libata-dev: move the CDB-intr DMA blacklisting Move the DMA blacklisting of the CDB-intr devices from ata_check_atapi_dma() to ata_dma_blacklisted(), where it makes more sense. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-21 23:00:25 -06:00
libata: use ata_id_c_string() There were several places where ATA ID strings are manually terminated and in some places possibly unterminated strings were passed to string functions which don't limit length like strstr(). This patch converts all of them over to ata_id_c_string(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-02 04:19:40 -07:00
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
while (ad->model_num) {
[libata] blacklist Maxtor*BANC* using new wildcard blacklist matching Support the use of '*' in model_num and model_rev entries in ata_device_blacklist[]. Based largely on David Milburn's "libata-core: support wildcard matching in ata_blacklist_entry" patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20 14:31:47 -06:00
if (!strn_pattern_cmp(ad->model_num, model_num, '*')) {
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
if (ad->model_rev == NULL)
return ad->horkage;
[libata] blacklist Maxtor*BANC* using new wildcard blacklist matching Support the use of '*' in model_num and model_rev entries in ata_device_blacklist[]. Based largely on David Milburn's "libata-core: support wildcard matching in ata_blacklist_entry" patch. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-20 14:31:47 -06:00
if (!strn_pattern_cmp(ad->model_rev, model_rev, '*'))
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
return ad->horkage;
[PATCH] Update libata DMA blacklist to cover versions, and resync with IDE layer Not much to say here except that some drives have fixed and bad firmware Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 08:54:04 -07:00
}
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
ad++;
[PATCH] Update libata DMA blacklist to cover versions, and resync with IDE layer Not much to say here except that some drives have fixed and bad firmware Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-22 08:54:04 -07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
return 0;
}
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
static int ata_dma_blacklisted(const struct ata_device *dev)
{
/* We don't support polling DMA.
* DMA blacklist those ATAPI devices with CDB-intr (and use PIO)
* if the LLDD handles only interrupts in the HSM_ST_LAST state.
*/
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
if ((dev->link->ap->flags & ATA_FLAG_PIO_POLLING) &&
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
(dev->flags & ATA_DFLAG_CDB_INTR))
return 1;
libata: clean up horkage handling Horkage handling had the following problems. * dev->horkage was positioned after ATA_DEVICE_CLEAR_OFFSET, so it was cleared before the device is configured. This broke HORKAGE_DIAGNOSTIC. * Some used dev->horkage while others called ata_device_blacklisted() directly. This was at best confusing. This patch moves dev->horkage right after dev->flags and set the field according to the blacklist during device configuration. All users test against dev->horkage. ata_device_blacklisted() now has only one user, make it static. While at it, rename it to ata_dev_blacklisted() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-04 22:31:27 -06:00
return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
[PATCH] libata: Revamp blacklist support to allow multiple kinds of blacklisting flaws Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-10-27 20:08:46 -06:00
}
libata: handle broken cable reporting One or two ancient drives predated the cable spec and didn't sent the valid bits for the field. I had hoped to leave this out of libata as a piece of historical annoyance but a recent CD drive shows the same bug so we have to import support for it. Same concept as Bartlomiej's changes old IDE except that as we have centralised blacklists we can avoid keeping another private table of stuff Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-05 15:58:58 -07:00
/**
* ata_is_40wire - check drive side detection
* @dev: device
*
* Perform drive side detection decoding, allowing for device vendors
* who can't follow the documentation.
*/
static int ata_is_40wire(struct ata_device *dev)
{
if (dev->horkage & ATA_HORKAGE_IVB)
return ata_drive_40wire_relaxed(dev->id);
return ata_drive_40wire(dev->id);
}
libata: isolate and rework cable logic Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28 15:33:46 -06:00
/**
* cable_is_40wire - 40/80/SATA decider
* @ap: port to consider
*
* This function encapsulates the policy for speed management
* in one place. At the moment we don't cache the result but
* there is a good case for setting ap->cbl to the result when
* we are called with unknown cables (and figuring out if it
* impacts hotplug at all).
*
* Return 1 if the cable appears to be 40 wire.
*/
static int cable_is_40wire(struct ata_port *ap)
{
struct ata_link *link;
struct ata_device *dev;
libata: fix device iteration bugs There were several places where only enabled devices should be iterated over but device enabledness wasn't checked. * IDENTIFY data 40 wire check in cable_is_40wire() * xfer_mode/ncq_enabled saving in ata_scsi_error() * DUBIOUS_XFER handling in ata_set_mode() While at it, reformat comments in cable_is_40wire(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27 04:59:23 -06:00
/* If the controller thinks we are 40 wire, we are. */
libata: isolate and rework cable logic Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28 15:33:46 -06:00
if (ap->cbl == ATA_CBL_PATA40)
return 1;
libata: fix device iteration bugs There were several places where only enabled devices should be iterated over but device enabledness wasn't checked. * IDENTIFY data 40 wire check in cable_is_40wire() * xfer_mode/ncq_enabled saving in ata_scsi_error() * DUBIOUS_XFER handling in ata_set_mode() While at it, reformat comments in cable_is_40wire(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27 04:59:23 -06:00
/* If the controller thinks we are 80 wire, we are. */
libata: isolate and rework cable logic Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28 15:33:46 -06:00
if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
return 0;
libata: fix device iteration bugs There were several places where only enabled devices should be iterated over but device enabledness wasn't checked. * IDENTIFY data 40 wire check in cable_is_40wire() * xfer_mode/ncq_enabled saving in ata_scsi_error() * DUBIOUS_XFER handling in ata_set_mode() While at it, reformat comments in cable_is_40wire(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27 04:59:23 -06:00
/* If the system is known to be 40 wire short cable (eg
* laptop), then we allow 80 wire modes even if the drive
* isn't sure.
*/
libata: cable logic The cable detect isolation patch inadvertently removed 40 wire short cable handling. Put it back Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-04-08 09:37:50 -06:00
if (ap->cbl == ATA_CBL_PATA40_SHORT)
return 0;
libata: fix device iteration bugs There were several places where only enabled devices should be iterated over but device enabledness wasn't checked. * IDENTIFY data 40 wire check in cable_is_40wire() * xfer_mode/ncq_enabled saving in ata_scsi_error() * DUBIOUS_XFER handling in ata_set_mode() While at it, reformat comments in cable_is_40wire(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-27 04:59:23 -06:00
/* If the controller doesn't know, we scan.
*
* Note: We look for all 40 wire detects at this point. Any
* 80 wire detect is taken to be 80 wire cable because
* - in many setups only the one drive (slave if present) will
* give a valid detect
* - if you have a non detect capable drive you don't want it
* to colour the choice
*/
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_link(link, ap, EDGE) {
ata_for_each_dev(dev, link, ENABLED) {
if (!ata_is_40wire(dev))
libata: isolate and rework cable logic Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28 15:33:46 -06:00
return 0;
}
}
return 1;
}
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
/**
* ata_dev_xfermask - Compute supported xfermask of the given device
* @dev: Device to compute xfermask for
*
[PATCH] libata: add per-dev pio/mwdma/udma_mask Add per-dev pio/mwdma/udma_mask. All transfer mode limits used to be applied to ap->*_mask which unnecessarily restricted other devices sharing the port. This change will also benefit later EH speed down and hotplug. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 22:07:50 -07:00
* Compute supported xfermask of @dev and store it in
* dev->*_mask. This function is responsible for applying all
* known limits including host controller limits, device
* blacklist, etc...
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
*
* LOCKING:
* None.
*/
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
static void ata_dev_xfermask(struct ata_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_link *link = dev->link;
struct ata_port *ap = link->ap;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
struct ata_host *host = ap->host;
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
unsigned long xfer_mask;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: implement per-dev xfermask Implement per-dev xfermask. libata used to determine xfermask per-port - the fastest mode of the slowest device on the port. This patch enables per-dev xfermask. Original patch is from Alan Cox <alan@redhat.com>. The following changes are made by me. * simplex warning message is added * remove disabled device handling code which is never invoked (originally for choosing port-wide lowest PIO mode) Cc: Alan Cox <alan@redhat.com> Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:07 -06:00
/* controller modes available */
[PATCH] libata: consider disabled devices in ata_dev_xfermask() ata_bus_probe() now marks failed devices properly and leaves meaningful transfer mode masks. This patch makes ata_dev_xfermask() consider disable devices when determining PIO mode to avoid violating device selection timing. While at it, move port-wide resttriction out of device iteration loop and try to make the function look a bit prettier. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:47 -07:00
xfer_mask = ata_pack_xfermask(ap->pio_mask,
ap->mwdma_mask, ap->udma_mask);
libata: warn if speed limited due to 40-wire cable Warn the user if a drive's transfer rate is limited because of a 40-wire cable detection. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:51 -07:00
/* drive modes available */
[PATCH] libata: implement per-dev xfermask Implement per-dev xfermask. libata used to determine xfermask per-port - the fastest mode of the slowest device on the port. This patch enables per-dev xfermask. Original patch is from Alan Cox <alan@redhat.com>. The following changes are made by me. * simplex warning message is added * remove disabled device handling code which is never invoked (originally for choosing port-wide lowest PIO mode) Cc: Alan Cox <alan@redhat.com> Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:07 -06:00
xfer_mask &= ata_pack_xfermask(dev->pio_mask,
dev->mwdma_mask, dev->udma_mask);
xfer_mask &= ata_id_xfermask(dev->id);
[PATCH] libata: consider disabled devices in ata_dev_xfermask() ata_bus_probe() now marks failed devices properly and leaves meaningful transfer mode masks. This patch makes ata_dev_xfermask() consider disable devices when determining PIO mode to avoid violating device selection timing. While at it, move port-wide resttriction out of device iteration loop and try to make the function look a bit prettier. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:47 -07:00
[PATCH] libata: Add CompactFlash support The CFA world has some additional rules and drive modes we need to support for newer expansion cards and on embedded boxes Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-10 11:52:12 -06:00
/*
* CFA Advanced TrueIDE timings are not allowed on a shared
* cable
*/
if (ata_dev_pair(dev)) {
/* No PIO5 or PIO6 */
xfer_mask &= ~(0x03 << (ATA_SHIFT_PIO + 5));
/* No MWDMA3 or MWDMA 4 */
xfer_mask &= ~(0x03 << (ATA_SHIFT_MWDMA + 3));
}
[PATCH] libata: implement per-dev xfermask Implement per-dev xfermask. libata used to determine xfermask per-port - the fastest mode of the slowest device on the port. This patch enables per-dev xfermask. Original patch is from Alan Cox <alan@redhat.com>. The following changes are made by me. * simplex warning message is added * remove disabled device handling code which is never invoked (originally for choosing port-wide lowest PIO mode) Cc: Alan Cox <alan@redhat.com> Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:07 -06:00
if (ata_dma_blacklisted(dev)) {
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
[PATCH] libata: use ATA printk helpers Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:56 -06:00
ata_dev_printk(dev, KERN_WARNING,
"device is on DMA blacklist, disabling DMA\n");
[PATCH] libata: implement per-dev xfermask Implement per-dev xfermask. libata used to determine xfermask per-port - the fastest mode of the slowest device on the port. This patch enables per-dev xfermask. Original patch is from Alan Cox <alan@redhat.com>. The following changes are made by me. * simplex warning message is added * remove disabled device handling code which is never invoked (originally for choosing port-wide lowest PIO mode) Cc: Alan Cox <alan@redhat.com> Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:07 -06:00
}
[PATCH] libata: reimplement ata_set_mode() using xfer_mask helpers Use xfer_mask helpers to determine transfer mode. This rewrite also makes transfer mode determination done before any actual configuration. This patch doesn't result in any functional changes. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05 12:31:57 -07:00
Fix simplex adapters with libata Recently I got my hands on nVidia's MCP61 PM-AM board, and it contains IDE chip configured by BIOS with only primary channel enabled. This confuses code which probes for device DMA capabilities - it gets 0x60 (happy duplex device) from primary channel BMDMA, but 0xFF (nobody here) from secondary channel BMDMA. Due to this code then believes that chip is simplex. I do not address this problem in my patch, as I'm not sure how to handle this. Probably ata_pci_init_one should have bitmap of enabled/possible interfaces instead of their count, but it looks like quite intrusive change, and maybe we do not care - for device with only one channel simplex and regular DMA engines are same. But making device simplex pointed out that support for DMA on simplex devices is currently broken - ata_dev_xfermask tests whether device is simplex and if it is whether DMA engine was assigned to this port. If not then it strips out DMA bits from device. Problem is that code which assigns DMA engine to port in ata_set_mode first detect device mode and assigns DMA engine to channel only if some DMA capable device was found. And as xfermask stripped out DMA bits, host->simplex_claimed is always NULL with current implementation. By allowing DMA either if simplex_claimed is NULL or if it points to current port DMA can be finally used - it gets assigned to first port which contains any DMA capable device. Before: pata_amd 0000:00:06.0: version 0.2.8 PCI: Setting latency timer of device 0000:00:06.0 to 64 ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 scsi4 : pata_amd ata5.00: ATAPI, max UDMA/66 ata5.00: simplex DMA is claimed by other device, disabling DMA ata5.00: configured for PIO4 scsi5 : pata_amd ata6: port disabled. ignoring. ata6: reset failed, giving up scsi 4:0:0:0: CD-ROM ATAPI DVD W DH16W1P LG12 PQ: 0 ANSI: 5 After: pata_amd 0000:00:06.0: version 0.2.8 PCI: Setting latency timer of device 0000:00:06.0 to 64 ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 scsi4 : pata_amd ata5.00: ATAPI, max UDMA/66 ata5.00: configured for UDMA/33 scsi5 : pata_amd ata6: port disabled. ignoring. ata6: reset failed, giving up scsi 4:0:0:0: CD-ROM ATAPI DVD W DH16W1P LG12 PQ: 0 ANSI: 5 Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-08 02:12:12 -07:00
if ((host->flags & ATA_HOST_SIMPLEX) &&
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
host->simplex_claimed && host->simplex_claimed != ap) {
[PATCH] libata: implement per-dev xfermask Implement per-dev xfermask. libata used to determine xfermask per-port - the fastest mode of the slowest device on the port. This patch enables per-dev xfermask. Original patch is from Alan Cox <alan@redhat.com>. The following changes are made by me. * simplex warning message is added * remove disabled device handling code which is never invoked (originally for choosing port-wide lowest PIO mode) Cc: Alan Cox <alan@redhat.com> Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:07 -06:00
xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
ata_dev_printk(dev, KERN_WARNING, "simplex DMA is claimed by "
"other device, disabling DMA\n");
[PATCH] libata: Simplex and other mode filtering logic Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27 10:58:20 -07:00
}
[PATCH] libata: consider disabled devices in ata_dev_xfermask() ata_bus_probe() now marks failed devices properly and leaves meaningful transfer mode masks. This patch makes ata_dev_xfermask() consider disable devices when determining PIO mode to avoid violating device selection timing. While at it, move port-wide resttriction out of device iteration loop and try to make the function look a bit prettier. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:47 -07:00
[libata] turn on !IORDY filter The previous commit erroneously noted that the !IORDY filter was turned on. No true, that change was split out into this commit. Originally authored and signed-off-by Alan Cox. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 07:56:46 -07:00
if (ap->flags & ATA_FLAG_NO_IORDY)
xfer_mask &= ata_pio_mask_no_iordy(dev);
[PATCH] libata: Simplex and other mode filtering logic Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27 10:58:20 -07:00
if (ap->ops->mode_filter)
libata: Change prototype of mode_filter to remove ata_port* With Tejun having added adev->ap some time ago we can get rid of the almost unused port being passed to mode filters. And while we are doing filters, lets turn on the !IORDY filter as well. Signed-off-by: Alan Cox <alan@redhat.com> With some hand massaging from Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 07:34:07 -07:00
xfer_mask = ap->ops->mode_filter(dev, xfer_mask);
[PATCH] libata: Simplex and other mode filtering logic Add a field to the host_set called 'flags' (was host_set_flags changed to suit Jeff) Add a simplex_claimed field so we can remember who owns the DMA channel Add a ->mode_filter() hook to allow drivers to filter modes Add docs for mode_filter and set_mode Filter according to simplex state Filter cable in core This provides the needed framework to support all the mode rules found in the PATA world. The simplex filter deals with 'to spec' simplex DMA systems found in older chips. The cable filter avoids duplicating the same rules in each chip driver with PATA. Finally the mode filter is neccessary because drive/chip combinations have errata that forbid certain modes with some drives or types of ATA object. Drive speed setup remains per channel for now and the filters now use the framework Tejun put into place which cleans them up a lot from the older libata-pata patches. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27 10:58:20 -07:00
libata: warn if speed limited due to 40-wire cable Warn the user if a drive's transfer rate is limited because of a 40-wire cable detection. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:51 -07:00
/* Apply cable rule here. Don't apply it early because when
* we handle hot plug the cable type can itself change.
* Check this last so that we know if the transfer rate was
* solely limited by the cable.
* Unknown or 80 wire cables reported host side are checked
* drive side as well. Cases where we know a 40wire cable
* is used safely for 80 are not checked here.
*/
if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
/* UDMA/44 or higher would be available */
libata: isolate and rework cable logic Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-28 15:33:46 -06:00
if (cable_is_40wire(ap)) {
[libata] checkpatch-inspired cleanups Tackle the relatively sane complaints of checkpatch --file. The vast majority is indentation and whitespace changes, the rest are * #include fixes * printk KERN_xxx prefix addition * BSS/initializer cleanups Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-19 04:42:56 -06:00
ata_dev_printk(dev, KERN_WARNING,
libata: warn if speed limited due to 40-wire cable Warn the user if a drive's transfer rate is limited because of a 40-wire cable detection. Signed-off-by: Robert Hancock <hancockr@shaw.ca> Cc: Jeff Garzik <jeff@garzik.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:51 -07:00
"limited to UDMA/33 due to 40-wire cable\n");
xfer_mask &= ~(0xF8 << ATA_SHIFT_UDMA);
}
[PATCH] libata: consider disabled devices in ata_dev_xfermask() ata_bus_probe() now marks failed devices properly and leaves meaningful transfer mode masks. This patch makes ata_dev_xfermask() consider disable devices when determining PIO mode to avoid violating device selection timing. While at it, move port-wide resttriction out of device iteration loop and try to make the function look a bit prettier. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 01:54:47 -07:00
ata_unpack_xfermask(xfer_mask, &dev->pio_mask,
&dev->mwdma_mask, &dev->udma_mask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
/**
* ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
* @dev: Device to which command will be sent
*
libata: more doc updates Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c.
2005-05-30 13:41:05 -06:00
* Issue SET FEATURES - XFER MODE command to device @dev
* on port @ap.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* LOCKING:
libata: doc updates
2005-05-30 17:49:12 -06:00
* PCI/etc. bus probe sem.
[PATCH] libata: make ata_set_mode() responsible for failure handling Make ata_set_mode() responsible for determining whether to take port or device offline on failure. ata_dev_set_xfermode() and ata_dev_set_mode() indicate error to the caller instead of disabling port directly on failure. Also, for consistency, ata_dev_present() check is done in ata_set_mode() instead of ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 23:25:31 -07:00
*
* RETURNS:
* 0 on success, AC_ERR_* mask otherwise.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
struct ata_taskfile tf;
[PATCH] libata: make ata_set_mode() responsible for failure handling Make ata_set_mode() responsible for determining whether to take port or device offline on failure. ata_dev_set_xfermode() and ata_dev_set_mode() indicate error to the caller instead of disabling port directly on failure. Also, for consistency, ata_dev_present() check is done in ata_set_mode() instead of ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 23:25:31 -07:00
unsigned int err_mask;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* set up set-features taskfile */
DPRINTK("set features - xfer mode\n");
libata: always use polling SETXFER Several people have reported LITE-ON LTR-48246S detection failed because SETXFER fails. It seems the device raises IRQ too early after SETXFER. This is controller independent. The same problem has been reported for different controllers. So, now we have pata_via where the controller raises IRQ before it's ready after SETXFER and a device which does similar thing. This patch makes libata always execute SETXFER via polling. As this only happens during EH, performance impact is nil. Setting ATA_TFLAG_POLLING is also moved from issue hot path to ata_dev_set_xfermode() - the only place where SETXFER can be issued. Note that ATA_TFLAG_POLLING applies only to drivers which implement SFF TF interface and use libata HSM. More advanced controllers ignore the flag. This doesn't matter for this fix as SFF TF controllers are the problematic ones. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-27 07:10:40 -06:00
/* Some controllers and ATAPI devices show flaky interrupt
* behavior after setting xfer mode. Use polling instead.
*/
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
ata_tf_init(dev, &tf);
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
tf.command = ATA_CMD_SET_FEATURES;
tf.feature = SETFEATURES_XFER;
libata: always use polling SETXFER Several people have reported LITE-ON LTR-48246S detection failed because SETXFER fails. It seems the device raises IRQ too early after SETXFER. This is controller independent. The same problem has been reported for different controllers. So, now we have pata_via where the controller raises IRQ before it's ready after SETXFER and a device which does similar thing. This patch makes libata always execute SETXFER via polling. As this only happens during EH, performance impact is nil. Setting ATA_TFLAG_POLLING is also moved from issue hot path to ata_dev_set_xfermode() - the only place where SETXFER can be issued. Note that ATA_TFLAG_POLLING applies only to drivers which implement SFF TF interface and use libata HSM. More advanced controllers ignore the flag. This doesn't matter for this fix as SFF TF controllers are the problematic ones. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-27 07:10:40 -06:00
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE | ATA_TFLAG_POLLING;
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
tf.protocol = ATA_PROT_NODATA;
libata: IORDY handling I believe this version meets all Sergei's objections Correct the logic for when we issue a set features for transfer mode - If the device has IORDY and the controller has IORDY - set the mode - If the device has IORDY and the controller does not - turn IORDY off - If neither has IORDY do nothing Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-19 07:33:11 -07:00
/* If we are using IORDY we must send the mode setting command */
libata: checkpatch fixes Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-23 19:12:14 -07:00
if (ata_pio_need_iordy(dev))
tf.nsect = dev->xfer_mode;
libata: IORDY handling I believe this version meets all Sergei's objections Correct the logic for when we issue a set features for transfer mode - If the device has IORDY and the controller has IORDY - set the mode - If the device has IORDY and the controller does not - turn IORDY off - If neither has IORDY do nothing Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-19 07:33:11 -07:00
/* If the device has IORDY and the controller does not - turn it off */
else if (ata_id_has_iordy(dev->id))
libata: checkpatch fixes Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-11-23 19:12:14 -07:00
tf.nsect = 0x01;
libata: IORDY handling I believe this version meets all Sergei's objections Correct the logic for when we issue a set features for transfer mode - If the device has IORDY and the controller has IORDY - set the mode - If the device has IORDY and the controller does not - turn IORDY off - If neither has IORDY do nothing Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-19 07:33:11 -07:00
else /* In the ancient relic department - skip all of this */
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
}
/**
[libata] Create internal helper ata_dev_set_feature() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:33:27 -06:00
* ata_dev_set_feature - Issue SET FEATURES - SATA FEATURES
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
* @dev: Device to which command will be sent
* @enable: Whether to enable or disable the feature
[libata] Create internal helper ata_dev_set_feature() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:33:27 -06:00
* @feature: The sector count represents the feature to set
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
*
* Issue SET FEATURES - SATA FEATURES command to device @dev
[libata] Create internal helper ata_dev_set_feature() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:33:27 -06:00
* on port @ap with sector count
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
*
* LOCKING:
* PCI/etc. bus probe sem.
*
* RETURNS:
* 0 on success, AC_ERR_* mask otherwise.
*/
[libata] Create internal helper ata_dev_set_feature() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:33:27 -06:00
static unsigned int ata_dev_set_feature(struct ata_device *dev, u8 enable,
u8 feature)
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
{
struct ata_taskfile tf;
unsigned int err_mask;
/* set up set-features taskfile */
DPRINTK("set features - SATA features\n");
ata_tf_init(dev, &tf);
tf.command = ATA_CMD_SET_FEATURES;
tf.feature = enable;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
[libata] Create internal helper ata_dev_set_feature() Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:33:27 -06:00
tf.nsect = feature;
[libata] check for SATA async notify support Check to see if an ATAPI device supports Asynchronous Notification. If so, enable it, if the host controller supports AN. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-15 01:57:11 -06:00
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: make ata_set_mode() responsible for failure handling Make ata_set_mode() responsible for determining whether to take port or device offline on failure. ata_dev_set_xfermode() and ata_dev_set_mode() indicate error to the caller instead of disabling port directly on failure. Also, for consistency, ata_dev_present() check is done in ata_set_mode() instead of ata_dev_set_mode(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 23:25:31 -07:00
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
/**
* ata_dev_init_params - Issue INIT DEV PARAMS command
* @dev: Device to which command will be sent
[PATCH] libata-core: fix current kernel-doc warnings Fix all current kernel-doc warnings. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-18 11:50:18 -06:00
* @heads: Number of heads (taskfile parameter)
* @sectors: Number of sectors (taskfile parameter)
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
*
* LOCKING:
[PATCH] libata: update ata_dev_init_params() Update ata_dev_init_params() such that it doesn't disable port directly but return with appropriate error mask on failure. This is preparation for splitting ata_dev_identify(). Note that this patch changes behavior of dev_init_params failure such that only failing devices are taken offline not the whole port. This change is intended. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-15 02:24:09 -07:00
* Kernel thread context (may sleep)
*
* RETURNS:
* 0 on success, AC_ERR_* mask otherwise.
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
*/
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
static unsigned int ata_dev_init_params(struct ata_device *dev,
u16 heads, u16 sectors)
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
{
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
struct ata_taskfile tf;
[PATCH] libata: update ata_dev_init_params() Update ata_dev_init_params() such that it doesn't disable port directly but return with appropriate error mask on failure. This is preparation for splitting ata_dev_identify(). Note that this patch changes behavior of dev_init_params failure such that only failing devices are taken offline not the whole port. This change is intended. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-15 02:24:09 -07:00
unsigned int err_mask;
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
/* Number of sectors per track 1-255. Number of heads 1-16 */
if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16)
[PATCH] libata: ata_dev_init_params() fixes ata_dev_init_params() fixes: - Get the "heads" and "sectors" parameters from caller instead of implicitly from dev->id[]. - Return AC_ERR_INVALID instead of 0 if an invalid parameter is found Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-27 01:39:18 -07:00
return AC_ERR_INVALID;
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
/* set up init dev params taskfile */
DPRINTK("init dev params \n");
[PATCH] libata: use dev->ap Use dev->ap where possible and eliminate superflous @ap from functions and structures. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:53 -06:00
ata_tf_init(dev, &tf);
[PATCH] libata: use ata_exec_internal() This patch converts all users of libata internal commands to use ata_exec_internal(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12 22:49:31 -07:00
tf.command = ATA_CMD_INIT_DEV_PARAMS;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
tf.nsect = sectors;
tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
libata: add @timeout to ata_exec_internal[_sg]() Add @timeout argument to ata_exec_internal[_sg](). If 0, default timeout ata_probe_timeout is used. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-09 00:05:44 -06:00
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
libata-core: Allow translation setting to fail On some early drives (pre ATA1) this feature is not supported. If it fails then we know the drive geometry is the hardware geometry and the one we tried to set anyway so just carry on. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-08 07:28:49 -06:00
/* A clean abort indicates an original or just out of spec drive
and we should continue as we issue the setup based on the
drive reported working geometry */
if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED))
err_mask = 0;
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
[PATCH] libata: update ata_dev_init_params() Update ata_dev_init_params() such that it doesn't disable port directly but return with appropriate error mask on failure. This is preparation for splitting ata_dev_identify(). Note that this patch changes behavior of dev_init_params failure such that only failing devices are taken offline not the whole port. This change is intended. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-15 02:24:09 -07:00
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
[libata] C/H/S support, for older devices
2005-05-12 13:29:42 -06:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
libata: doc updates
2005-05-30 17:49:12 -06:00
* ata_sg_clean - Unmap DMA memory associated with command
* @qc: Command containing DMA memory to be released
*
* Unmap all mapped DMA memory associated with this command.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* LOCKING:
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* spin_lock_irqsave(host lock)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
[PATCH] libata: prepare ata_sg_clean() for invocation from EH Make ata_sg_clean() global and don't allow NCQ for internal commands. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-11-14 06:47:10 -07:00
void ata_sg_clean(struct ata_queued_cmd *qc)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct ata_port *ap = qc->ap;
libata: convert to chained sg libata used private sg iterator to handle padding sg. Now that sg can be chained, padding can be handled using standard sg ops. Convert to chained sg. * s/qc->__sg/qc->sg/ * s/qc->pad_sgent/qc->extra_sg[]/. Because chaining consumes one sg entry. There need to be two extra sg entries. The renaming is also for future addition of other extra sg entries. * Padding setup is moved into ata_sg_setup_extra() which is organized in a way that future addition of other extra sg entries is easy. * qc->orig_n_elem is unused and removed. * qc->n_elem now contains the number of sg entries that LLDs should map. qc->mapped_n_elem is added to carry the original number of mapped sgs for unmapping. * The last sg of the original sg list is used to chain to extra sg list. The original last sg is pointed to by qc->last_sg and the content is stored in qc->saved_last_sg. It's restored during ata_sg_clean(). * All sg walking code has been updated. Unnecessary assertions and checks for conditions the core layer already guarantees are removed. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-05 00:43:11 -07:00
struct scatterlist *sg = qc->sg;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
int dir = qc->dma_dir;
libata: use WARN_ON_ONCE on hot paths Convert WARN_ON() on command issue/completion paths to WARN_ON_ONCE() so that libata doesn't spam the machine even when one of those conditions triggers repeatedly. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 03:19:14 -07:00
WARN_ON_ONCE(sg == NULL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: eliminate the home grown dma padding in favour of that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19 03:36:56 -07:00
VPRINTK("unmapping %u sg elements\n", qc->n_elem);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: eliminate the home grown dma padding in favour of that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-19 03:36:56 -07:00
if (qc->n_elem)
libata: fix dma_unmap_sg misuse libata passes the returned value of dma_map_sg() to dma_unmap_sg(),which is the misuse of dma_unmap_sg(). DMA-mapping.txt says: To unmap a scatterlist, just call: pci_unmap_sg(pdev, sglist, nents, direction); Again, make sure DMA activity has already finished. PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be the _same_ one you passed into the pci_map_sg call, it should _NOT_ be the 'count' value _returned_ from the pci_map_sg call. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-27 01:35:43 -07:00
dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
qc->flags &= ~ATA_QCFLAG_DMAMAP;
libata: convert to chained sg libata used private sg iterator to handle padding sg. Now that sg can be chained, padding can be handled using standard sg ops. Convert to chained sg. * s/qc->__sg/qc->sg/ * s/qc->pad_sgent/qc->extra_sg[]/. Because chaining consumes one sg entry. There need to be two extra sg entries. The renaming is also for future addition of other extra sg entries. * Padding setup is moved into ata_sg_setup_extra() which is organized in a way that future addition of other extra sg entries is easy. * qc->orig_n_elem is unused and removed. * qc->n_elem now contains the number of sg entries that LLDs should map. qc->mapped_n_elem is added to carry the original number of mapped sgs for unmapping. * The last sg of the original sg list is used to chain to extra sg list. The original last sg is pointed to by qc->last_sg and the content is stored in qc->saved_last_sg. It's restored during ata_sg_clean(). * All sg walking code has been updated. Unnecessary assertions and checks for conditions the core layer already guarantees are removed. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-05 00:43:11 -07:00
qc->sg = NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
/**
libata: don't check whether to use DMA or not for no data commands There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-16 21:36:26 -06:00
* atapi_check_dma - Check whether ATAPI DMA can be supported
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* @qc: Metadata associated with taskfile to check
*
libata: more doc updates Document recently-added ata_port_operations hooks. Fill several doc stubs in libata-core.c.
2005-05-30 13:41:05 -06:00
* Allow low-level driver to filter ATA PACKET commands, returning
* a status indicating whether or not it is OK to use DMA for the
* supplied PACKET command.
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* LOCKING:
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
* spin_lock_irqsave(host lock)
*
* RETURNS: 0 when ATAPI DMA can be used
* nonzero otherwise
*/
libata: don't check whether to use DMA or not for no data commands There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-06-16 21:36:26 -06:00
int atapi_check_dma(struct ata_queued_cmd *qc)
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
{
struct ata_port *ap = qc->ap;
[PATCH] libata-dev: fix the device err check sequence (respin) Current irq-pio checks ERR bit and stops on ERR before it does anything else. This behavior doesn't look right. The DRQ bit should take higher precedence than the ERR bit. Changes: - Let the HSM do the data transfer whenever the device asks for DRQ bit, even if the ERR bit is set. - For DRQ=1 ERR=1, don't trust the data Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 03:11:12 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
/* Don't allow DMA if it isn't multiple of 16 bytes. Quite a
* few ATAPI devices choke on such DMA requests.
*/
libata: implement ATA_HORKAGE_ATAPI_MOD16_DMA and apply it libata always uses PIO for ATAPI commands when the number of bytes to transfer isn't multiple of 16 but quantum DAT72 chokes on odd bytes PIO transfers. Implement a horkage to skip the mod16 check and apply it to the quantum device. This is reported by John Clark in the following thread. http://thread.gmane.org/gmane.linux.ide/34748 Signed-off-by: Tejun Heo <tj@kernel.org> Cc: John Clark <clarkjc@runbox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 03:01:09 -07:00
if (!(qc->dev->horkage & ATA_HORKAGE_ATAPI_MOD16_DMA) &&
unlikely(qc->nbytes & 15))
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
return 1;
[PATCH] libata-dev: Move out the HSM code from ata_host_intr() Move out the irq-pio HSM code from ata_host_intr() to the new ata_hsm_move() function verbatim. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 02:43:49 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
if (ap->ops->check_atapi_dma)
return ap->ops->check_atapi_dma(qc);
[PATCH] libata-dev: Move out the HSM code from ata_host_intr() Move out the irq-pio HSM code from ata_host_intr() to the new ata_hsm_move() function verbatim. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 02:43:49 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
/**
* ata_std_qc_defer - Check whether a qc needs to be deferred
* @qc: ATA command in question
*
* Non-NCQ commands cannot run with any other command, NCQ or
* not. As upper layer only knows the queue depth, we are
* responsible for maintaining exclusion. This function checks
* whether a new command @qc can be issued.
*
* LOCKING:
* spin_lock_irqsave(host lock)
*
* RETURNS:
* ATA_DEFER_* if deferring is needed, 0 otherwise.
*/
int ata_std_qc_defer(struct ata_queued_cmd *qc)
{
struct ata_link *link = qc->dev->link;
[PATCH] libata-dev: Move out the HSM code from ata_host_intr() Move out the irq-pio HSM code from ata_host_intr() to the new ata_hsm_move() function verbatim. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 02:43:49 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
if (qc->tf.protocol == ATA_PROT_NCQ) {
if (!ata_tag_valid(link->active_tag))
return 0;
} else {
if (!ata_tag_valid(link->active_tag) && !link->sactive)
return 0;
}
[PATCH] libata-dev: Move out the HSM code from ata_host_intr() Move out the irq-pio HSM code from ata_host_intr() to the new ata_hsm_move() function verbatim. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 02:43:49 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
return ATA_DEFER_LINK;
}
[PATCH] libata-dev: Minor fix for ata_hsm_move() to work with ata_host_intr() Minor fix for ata_hsm_move() to work with ata_host_intr(). Changes: - WARN_ON() and comment fix - Make the HSM_ST_LAST device status checking more rigid. - Treat unknown HSM state as BUG(). Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 02:45:49 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
void ata_noop_qc_prep(struct ata_queued_cmd *qc) { }
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
/**
* ata_sg_init - Associate command with scatter-gather table.
* @qc: Command to be associated
* @sg: Scatter-gather table.
* @n_elem: Number of elements in s/g table.
*
* Initialize the data-related elements of queued_cmd @qc
* to point to a scatter-gather table @sg, containing @n_elem
* elements.
*
* LOCKING:
* spin_lock_irqsave(host lock)
*/
void ata_sg_init(struct ata_queued_cmd *qc, struct scatterlist *sg,
unsigned int n_elem)
{
qc->sg = sg;
qc->n_elem = n_elem;
qc->cursg = qc->sg;
}
[PATCH] libata-dev: Let ata_hsm_move() work with both irq-pio and polling pio Let ata_hsm_move() work with both irq-pio and polling pio codepath. Changes: - add a new parameter "in_wq" for polling pio - add return value "poll_next" to tell polling pio task whether the HSM is finished - merge code from ata_pio_first_block() to the HSM_ST_FIRST state. - call ata_poll_qc_complete() if called from the workqueue Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 02:48:02 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
/**
* ata_sg_setup - DMA-map the scatter-gather table associated with a command.
* @qc: Command with scatter-gather table to be mapped.
*
* DMA-map the scatter-gather table associated with queued_cmd @qc.
*
* LOCKING:
* spin_lock_irqsave(host lock)
*
* RETURNS:
* Zero on success, negative on error.
*
*/
static int ata_sg_setup(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
unsigned int n_elem;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
VPRINTK("ENTER, ata%u\n", ap->print_id);
[PATCH] libata-dev: Move out the HSM code from ata_host_intr() Move out the irq-pio HSM code from ata_host_intr() to the new ata_hsm_move() function verbatim. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 02:43:49 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
n_elem = dma_map_sg(ap->dev, qc->sg, qc->n_elem, qc->dma_dir);
if (n_elem < 1)
return -1;
[PATCH] libata-dev: Let ata_hsm_move() work with both irq-pio and polling pio Let ata_hsm_move() work with both irq-pio and polling pio codepath. Changes: - add a new parameter "in_wq" for polling pio - add return value "poll_next" to tell polling pio task whether the HSM is finished - merge code from ata_pio_first_block() to the HSM_ST_FIRST state. - call ata_poll_qc_complete() if called from the workqueue Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-25 02:48:02 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
DPRINTK("%d sg elements mapped\n", n_elem);
libata: fix dma_unmap_sg misuse libata passes the returned value of dma_map_sg() to dma_unmap_sg(),which is the misuse of dma_unmap_sg(). DMA-mapping.txt says: To unmap a scatterlist, just call: pci_unmap_sg(pdev, sglist, nents, direction); Again, make sure DMA activity has already finished. PLEASE NOTE: The 'nents' argument to the pci_unmap_sg call must be the _same_ one you passed into the pci_map_sg call, it should _NOT_ be the 'count' value _returned_ from the pci_map_sg call. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-27 01:35:43 -07:00
qc->orig_n_elem = qc->n_elem;
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
qc->n_elem = n_elem;
qc->flags |= ATA_QCFLAG_DMAMAP;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
/**
* swap_buf_le16 - swap halves of 16-bit words in place
* @buf: Buffer to swap
* @buf_words: Number of 16-bit words in buffer.
*
* Swap halves of 16-bit words if needed to convert from
* little-endian byte order to native cpu byte order, or
* vice-versa.
*
* LOCKING:
* Inherited from caller.
*/
void swap_buf_le16(u16 *buf, unsigned int buf_words)
[PATCH] libata: convert pio_task and packet_task to port_task Make pio_task and atapi_packet_task use port_task. atapi_packet_task() is moved upward such that it's right after ata_pio_task(). This position is more natural and makes adding prototype for ata_qc_issue_prot() unnecessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
{
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
#ifdef __BIG_ENDIAN
unsigned int i;
[PATCH] libata: convert pio_task and packet_task to port_task Make pio_task and atapi_packet_task use port_task. atapi_packet_task() is moved upward such that it's right after ata_pio_task(). This position is more natural and makes adding prototype for ata_qc_issue_prot() unnecessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
libata: reorganize SFF related stuff * Move SFF related functions from libata-core.c to libata-sff.c. ata_[bmdma_]sff_port_ops, ata_devchk(), ata_dev_try_classify(), ata_std_dev_select(), ata_tf_to_host(), ata_busy_sleep(), ata_wait_after_reset(), ata_wait_ready(), ata_bus_post_reset(), ata_bus_softreset(), ata_bus_reset(), ata_std_softreset(), sata_std_hardreset(), ata_fill_sg(), ata_fill_sg_dumb(), ata_qc_prep(), ata_dump_qc_prep(), ata_data_xfer(), ata_data_xfer_noirq(), ata_pio_sector(), ata_pio_sectors(), atapi_send_cdb(), __atapi_pio_bytes(), atapi_pio_bytes(), ata_hsm_ok_in_wq(), ata_hsm_qc_complete(), ata_hsm_move(), ata_pio_task(), ata_qc_issue_prot(), ata_host_intr(), ata_interrupt(), ata_std_ports() * Make ata_pio_queue_task() global as it's now called from libata-sff.c. * Move SFF related stuff in include/linux/libata.h and drivers/ata/libata.h into one place. While at it, move timing constants into the global enum definition and fortify comments a bit. This patch strictly moves stuff around and as such doesn't cause any functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25 07:16:41 -06:00
for (i = 0; i < buf_words; i++)
buf[i] = le16_to_cpu(buf[i]);
#endif /* __BIG_ENDIAN */
[PATCH] libata: convert pio_task and packet_task to port_task Make pio_task and atapi_packet_task use port_task. atapi_packet_task() is moved upward such that it's right after ata_pio_task(). This position is more natural and makes adding prototype for ata_qc_issue_prot() unnecessary. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-04 23:29:09 -07:00
}
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
/**
* ata_qc_new - Request an available ATA command, for queueing
libata: fix kernel-doc warnings Fix libata kernel-doc warnings: Warning(linux-next-20090120//drivers/ata/libata-core.c:4720): Excess function parameter 'dev' description in 'ata_qc_new' Warning(linux-next-20090120//drivers/ata/libata-scsi.c:428): No description found for parameter 'ap' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-20 17:28:59 -07:00
* @ap: target port
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
*
* LOCKING:
* None.
*/
static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
{
struct ata_queued_cmd *qc = NULL;
unsigned int i;
/* no command while frozen */
if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
return NULL;
/* the last tag is reserved for internal command. */
for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
if (!test_and_set_bit(i, &ap->qc_allocated)) {
qc = __ata_qc_from_tag(ap, i);
break;
}
if (qc)
qc->tag = i;
return qc;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
* ata_qc_new_init - Request an available ATA command, and initialize it
* @dev: Device from whom we request an available command structure
*
* LOCKING:
libata: doc updates
2005-05-30 17:49:12 -06:00
* None.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_port *ap = dev->link->ap;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
struct ata_queued_cmd *qc;
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
qc = ata_qc_new(ap);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (qc) {
qc->scsicmd = NULL;
qc->ap = ap;
qc->dev = dev;
[libata] minor fixes, new helpers - in ata_dev_identify(), don't assume that all devices are either ATA or ATAPI. In the future, this code will see port multipliers and other devices. - make a debugging printk less verbose - add new helper ata_qc_reinit() - add new helper BPRINTK() and port flag ATA_FLAG_DEBUGMSG, for fine-grained debugging use.
2005-11-14 12:14:16 -07:00
ata_qc_reinit(qc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
return qc;
}
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
/**
* ata_qc_free - free unused ata_queued_cmd
* @qc: Command to complete
*
* Designed to free unused ata_queued_cmd object
* in case something prevents using it.
*
* LOCKING:
* spin_lock_irqsave(host lock)
*/
void ata_qc_free(struct ata_queued_cmd *qc)
{
drivers/ata/libata: Move dereference after NULL test In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-17 00:41:47 -06:00
struct ata_port *ap;
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
unsigned int tag;
libata: use WARN_ON_ONCE on hot paths Convert WARN_ON() on command issue/completion paths to WARN_ON_ONCE() so that libata doesn't spam the machine even when one of those conditions triggers repeatedly. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 03:19:14 -07:00
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
drivers/ata/libata: Move dereference after NULL test In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-17 00:41:47 -06:00
ap = qc->ap;
libata: revert convert-to-block-tagging patches This patch reverts the following three commits which convert libata to use block layer tagging. 43a49cbdf31e812c0d8f553d433b09b421f5d52c e013e13bf605b9e6b702adffbe2853cfc60e7806 2fca5ccf97d2c28bcfce44f5b07d85e74e3cd18e Although using block layer tagging is the right direction, due to the tight coupling among tag number, data structure allocation and hardware command slot allocation, libata doesn't work correctly with the current conversion. The biggest problem is guaranteeing that tag 0 is always used for non-NCQ commands. Due to the way blk-tag is implemented and how SCSI starts and finishes requests, such guarantee can't be made. I'm not sure whether this would actually break any low level driver but it doesn't look like a good idea to break such assumption given the frailty of ATA controllers. So, for the time being, keep using the old dumb in-libata qc allocation. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Jens Axobe <jens.axboe@oracle.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-09 22:48:21 -07:00
qc->flags = 0;
tag = qc->tag;
if (likely(ata_tag_valid(tag))) {
qc->tag = ATA_TAG_POISON;
clear_bit(tag, &ap->qc_allocated);
}
}
[PATCH] libata: inline ata_qc_complete() This patch inlines ata_qc_complete() and uninlines __ata_qc_complete() as suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10 23:13:49 -07:00
void __ata_qc_complete(struct ata_queued_cmd *qc)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
drivers/ata/libata: Move dereference after NULL test In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-17 00:41:47 -06:00
struct ata_port *ap;
struct ata_link *link;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
libata: use WARN_ON_ONCE on hot paths Convert WARN_ON() on command issue/completion paths to WARN_ON_ONCE() so that libata doesn't spam the machine even when one of those conditions triggers repeatedly. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 03:19:14 -07:00
WARN_ON_ONCE(qc == NULL); /* ata_qc_from_tag _might_ return NULL */
WARN_ON_ONCE(!(qc->flags & ATA_QCFLAG_ACTIVE));
drivers/ata/libata: Move dereference after NULL test In each case, if the NULL test on qc is needed, then the derefernce should be after the NULL test. A simplified version of the semantic match that detects this problem is as follows (http://coccinelle.lip6.fr/): // <smpl> @match exists@ expression x, E; identifier fld; @@ * x->fld ... when != \(x = E\|&x\) * x == NULL // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-17 00:41:47 -06:00
ap = qc->ap;
link = qc->dev->link;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
[PATCH] libata: clear ap->active_tag atomically w.r.t. command completion ap->active_tag was cleared in ata_qc_free(). This left ap->active_tag dangling after ata_qc_complete(). Spurious interrupts inbetween could incorrectly access the qc. Clear active_tag in ata_qc_complete(). This change is necessary for later EH changes. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:32 -06:00
/* command should be marked inactive atomically with qc completion */
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
if (qc->tf.protocol == ATA_PROT_NCQ) {
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
link->sactive &= ~(1 << qc->tag);
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
if (!link->sactive)
ap->nr_active_links--;
} else {
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
link->active_tag = ATA_TAG_POISON;
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
ap->nr_active_links--;
}
/* clear exclusive status */
if (unlikely(qc->flags & ATA_QCFLAG_CLEAR_EXCL &&
ap->excl_link == link))
ap->excl_link = NULL;
[PATCH] libata: clear ap->active_tag atomically w.r.t. command completion ap->active_tag was cleared in ata_qc_free(). This left ap->active_tag dangling after ata_qc_complete(). Spurious interrupts inbetween could incorrectly access the qc. Clear active_tag in ata_qc_complete(). This change is necessary for later EH changes. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:32 -06:00
[PATCH] libata: Clear ATA_QCFLAG_ACTIVE flag before calling the completion callback Description: After calling the completion callback, the libata error handler might be running and getting atapi sense data. Clearing the ATA_QCFLAG_ACTIVE flag at this point might interfere with the libata error handler. Changes: - Clear the ATA_QCFLAG_ACTIVE flag before calling the completion callback (and also before the error handler) - Add some comment Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16 00:25:38 -06:00
/* atapi: mark qc as inactive to prevent the interrupt handler
* from completing the command twice later, before the error handler
* is called. (when rc != 0 and atapi request sense is needed)
*/
qc->flags &= ~ATA_QCFLAG_ACTIVE;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
ap->qc_active &= ~(1 << qc->tag);
[PATCH] libata: Clear ATA_QCFLAG_ACTIVE flag before calling the completion callback Description: After calling the completion callback, the libata error handler might be running and getting atapi sense data. Clearing the ATA_QCFLAG_ACTIVE flag at this point might interfere with the libata error handler. Changes: - Clear the ATA_QCFLAG_ACTIVE flag before calling the completion callback (and also before the error handler) - Add some comment Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-16 00:25:38 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* call completion callback */
[PATCH] libata: make the owner of a qc responsible for freeing it qc used to be freed automatically on command completion. However, as a qc can carry information about its completion status, it can be useful to its owner/issuer after command completion. This patch makes freeing qc responsibility of its owner. This simplifies ata_exec_internal() and makes command turn-around for atapi request sensing less hackish. This change was originally suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
qc->complete_fn(qc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: sync result_tf.flags w/ command tf.flags libata didn't initialize result_tf.flags which indicates transfer type (RW/FUA) and address type (CHS/LBA/LBA48). ata_gen_fixed_sense() assumed result_tf.flags equals command tf.flags and failed to report the first failed block to SCSI layer because zero tf flags indicates CHS and bad block reporting for CHS is not implemented. Implement fill_result_tf() which sets result_tf.flags to command tf.flags and use it to fill result_tf. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 06:37:35 -07:00
static void fill_result_tf(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
qc->result_tf.flags = qc->tf.flags;
libata: add qc_fill_rtf port operation On command completion, ata_qc_complete() directly called ops->tf_read to fill qc->result_tf. This patch adds ops->qc_fill_rtf to replace hardcoded ops->tf_read usage. ata_sff_qc_fill_rtf() which uses ops->tf_read to fill result_tf is implemented and set in ata_base_port_ops and other ops tables which don't inherit from ata_base_port_ops, so this patch doesn't introduce any behavior change. ops->qc_fill_rtf() is similar to ops->sff_tf_read() but can only be called when a command finishes. As some non-SFF controllers don't have TF registers defined unless they're associated with in-flight commands, this limited operation makes life easier for those drivers and help lifting SFF assumptions from libata core layer. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:20 -06:00
ap->ops->qc_fill_rtf(qc);
[PATCH] libata: sync result_tf.flags w/ command tf.flags libata didn't initialize result_tf.flags which indicates transfer type (RW/FUA) and address type (CHS/LBA/LBA48). ata_gen_fixed_sense() assumed result_tf.flags equals command tf.flags and failed to report the first failed block to SCSI layer because zero tf flags indicates CHS and bad block reporting for CHS is not implemented. Implement fill_result_tf() which sets result_tf.flags to command tf.flags and use it to fill result_tf. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 06:37:35 -07:00
}
libata: implement ATA_DFLAG_DUBIOUS_XFER ATA_DFLAG_DUBIOUS_XFER is set whenever data transfer speed or method changes and gets cleared when data transfer command succeeds in the newly configured transfer mode. This will be used to improve speed down logic. Signed-off-by: Tejun Heo <htejun@gmail.com< Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:28:58 -07:00
static void ata_verify_xfer(struct ata_queued_cmd *qc)
{
struct ata_device *dev = qc->dev;
if (ata_tag_internal(qc->tag))
return;
if (ata_is_nodata(qc->tf.protocol))
return;
if ((dev->mwdma_mask || dev->udma_mask) && ata_is_pio(qc->tf.protocol))
return;
dev->flags &= ~ATA_DFLAG_DUBIOUS_XFER;
}
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
/**
* ata_qc_complete - Complete an active ATA command
* @qc: Command to complete
*
* Indicate to the mid and upper layers that an ATA
* command has completed, with either an ok or not-ok status.
*
* LOCKING:
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* spin_lock_irqsave(host lock)
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
*/
void ata_qc_complete(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
/* XXX: New EH and old EH use different mechanisms to
* synchronize EH with regular execution path.
*
* In new EH, a failed qc is marked with ATA_QCFLAG_FAILED.
* Normal execution path is responsible for not accessing a
* failed qc. libata core enforces the rule by returning NULL
* from ata_qc_from_tag() for failed qcs.
*
* Old EH depends on ata_qc_complete() nullifying completion
* requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does
* not synchronize with interrupt handler. Only PIO task is
* taken care of.
*/
if (ap->ops->error_handler) {
libata: relocate and fix post-command processing Some commands need post-processing after successful completion. This was done in ata_scsi_qc_complete() till now but this has the following problems. * Post-command processing gets executed when qc is completed from EH. Some qc's are retried from EH with zero err_mask and thus triggers unnecessary/incorrect post-command processing. * Command post processing doesn't belong to SAT layer. * Link-wide revalidation was scheduled where device revalidation suffices. This patch moves post-command processing to success completion path of ata_qc_complete() which is travelled iff the command is going to be completed without passing through EH and updates post-command processing such that device-specific action is used. While at it, restructure code a bit for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25 03:22:44 -06:00
struct ata_device *dev = qc->dev;
struct ata_eh_info *ehi = &dev->link->eh_info;
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
if (unlikely(qc->err_mask))
qc->flags |= ATA_QCFLAG_FAILED;
if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
libata: fix internal command failure handling When an internal command fails, it should be failed directly without invoking EH. In the original implemetation, this was accomplished by letting internal command bypass failure handling in ata_qc_complete(). However, later changes added post-successful-completion handling to that code path and the success path is no longer adequate as internal command failure path. One of the visible problems is that internal command failure due to timeout or other freeze conditions would spuriously trigger WARN_ON_ONCE() in the success path. This patch updates failure path such that internal command failure handling is contained there. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-15 22:00:51 -06:00
/* always fill result TF for failed qc */
fill_result_tf(qc);
if (!ata_tag_internal(qc->tag))
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
ata_qc_schedule_eh(qc);
libata: fix internal command failure handling When an internal command fails, it should be failed directly without invoking EH. In the original implemetation, this was accomplished by letting internal command bypass failure handling in ata_qc_complete(). However, later changes added post-successful-completion handling to that code path and the success path is no longer adequate as internal command failure path. One of the visible problems is that internal command failure due to timeout or other freeze conditions would spuriously trigger WARN_ON_ONCE() in the success path. This patch updates failure path such that internal command failure handling is contained there. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-10-15 22:00:51 -06:00
else
__ata_qc_complete(qc);
return;
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
}
libata: fix spurious WARN_ON_ONCE() on port freeze Commit 54c38444fad6a99b4b19512f8f0055d69115e69e makes libata abort qcs after the port is frozen. This is necessary to guarantee that TF registers are accessed after the DMA engine is shutdown after an error. However, this triggers WARN_ON_ONCE() check in ata_qc_complete() spuriously. Move WARN_ON_ONCE() downwards such that failing commands while frozen doesn't trigger it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-17 03:45:27 -06:00
WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
/* read result TF if requested */
if (qc->flags & ATA_QCFLAG_RESULT_TF)
[PATCH] libata: sync result_tf.flags w/ command tf.flags libata didn't initialize result_tf.flags which indicates transfer type (RW/FUA) and address type (CHS/LBA/LBA48). ata_gen_fixed_sense() assumed result_tf.flags equals command tf.flags and failed to report the first failed block to SCSI layer because zero tf flags indicates CHS and bad block reporting for CHS is not implemented. Implement fill_result_tf() which sets result_tf.flags to command tf.flags and use it to fill result_tf. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 06:37:35 -07:00
fill_result_tf(qc);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
libata: relocate and fix post-command processing Some commands need post-processing after successful completion. This was done in ata_scsi_qc_complete() till now but this has the following problems. * Post-command processing gets executed when qc is completed from EH. Some qc's are retried from EH with zero err_mask and thus triggers unnecessary/incorrect post-command processing. * Command post processing doesn't belong to SAT layer. * Link-wide revalidation was scheduled where device revalidation suffices. This patch moves post-command processing to success completion path of ata_qc_complete() which is travelled iff the command is going to be completed without passing through EH and updates post-command processing such that device-specific action is used. While at it, restructure code a bit for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25 03:22:44 -06:00
/* Some commands need post-processing after successful
* completion.
*/
switch (qc->tf.command) {
case ATA_CMD_SET_FEATURES:
if (qc->tf.feature != SETFEATURES_WC_ON &&
qc->tf.feature != SETFEATURES_WC_OFF)
break;
/* fall through */
case ATA_CMD_INIT_DEV_PARAMS: /* CHS translation changed */
case ATA_CMD_SET_MULTI: /* multi_count changed */
/* revalidate device */
ehi->dev_action[dev->devno] |= ATA_EH_REVALIDATE;
ata_port_schedule_eh(ap);
break;
libata: track SLEEP state and issue SRST to wake it up ATA devices in SLEEP mode don't respond to any commands. SRST is necessary to wake it up. Till now, when a command is issued to a device in SLEEP mode, the command times out, which makes EH reset the device and retry the command after that, causing a long delay. This patch makes libata track SLEEP state and issue SRST automatically if a command is about to be issued to a device in SLEEP. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Bruce Allen <ballen@gravity.phys.uwm.edu> Cc: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25 03:30:36 -06:00
case ATA_CMD_SLEEP:
dev->flags |= ATA_DFLAG_SLEEPING;
break;
libata: relocate and fix post-command processing Some commands need post-processing after successful completion. This was done in ata_scsi_qc_complete() till now but this has the following problems. * Post-command processing gets executed when qc is completed from EH. Some qc's are retried from EH with zero err_mask and thus triggers unnecessary/incorrect post-command processing. * Command post processing doesn't belong to SAT layer. * Link-wide revalidation was scheduled where device revalidation suffices. This patch moves post-command processing to success completion path of ata_qc_complete() which is travelled iff the command is going to be completed without passing through EH and updates post-command processing such that device-specific action is used. While at it, restructure code a bit for readability. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25 03:22:44 -06:00
}
libata: implement ATA_DFLAG_DUBIOUS_XFER ATA_DFLAG_DUBIOUS_XFER is set whenever data transfer speed or method changes and gets cleared when data transfer command succeeds in the newly configured transfer mode. This will be used to improve speed down logic. Signed-off-by: Tejun Heo <htejun@gmail.com< Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:28:58 -07:00
if (unlikely(dev->flags & ATA_DFLAG_DUBIOUS_XFER))
ata_verify_xfer(qc);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
__ata_qc_complete(qc);
} else {
if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
return;
/* read result TF if failed or requested */
if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF)
[PATCH] libata: sync result_tf.flags w/ command tf.flags libata didn't initialize result_tf.flags which indicates transfer type (RW/FUA) and address type (CHS/LBA/LBA48). ata_gen_fixed_sense() assumed result_tf.flags equals command tf.flags and failed to report the first failed block to SCSI layer because zero tf flags indicates CHS and bad block reporting for CHS is not implemented. Implement fill_result_tf() which sets result_tf.flags to command tf.flags and use it to fill result_tf. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-11-14 06:37:35 -07:00
fill_result_tf(qc);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
__ata_qc_complete(qc);
}
}
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
/**
* ata_qc_complete_multiple - Complete multiple qcs successfully
* @ap: port in question
* @qc_active: new qc_active mask
*
* Complete in-flight commands. This functions is meant to be
* called from low-level driver's interrupt routine to complete
* requests normally. ap->qc_active and @qc_active is compared
* and commands are completed accordingly.
*
* LOCKING:
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* spin_lock_irqsave(host lock)
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
*
* RETURNS:
* Number of completed commands on success, -errno otherwise.
*/
libata: drop @finish_qc from ata_qc_complete_multiple() ata_qc_complete_multiple() took @finish_qc and called it on every qc before completing it. This was to give opportunity to update TF cache before ata_qc_complete() tries to fill result_tf. Now that result TF is a separate operation, this is no longer necessary. Update sata_sil24, which was the only user of this mechanism, such that it implements its own ops->qc_fill_rtf() and drop @finish_qc from ata_qc_complete_multiple(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:20 -06:00
int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active)
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
{
int nr_done = 0;
u32 done_mask;
done_mask = ap->qc_active ^ qc_active;
if (unlikely(done_mask & qc_active)) {
ata_port_printk(ap, KERN_ERR, "illegal qc_active transition "
"(%08x->%08x)\n", ap->qc_active, qc_active);
return -EINVAL;
}
[libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2 We very rarely (if ever) complete more than one command in the sactive mask at the time, even for extremely high IO rates. So looping over the entire range of possible tags is pointless, instead use __ffs() to just find the completed tags directly. Updated to clear the tag from the done_mask instead of shifting done_mask down as suggested by From: Tejun Heo <htejun@gmail.com> Verified with a user space tester to produce the same results. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-20 01:44:39 -06:00
while (done_mask) {
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
struct ata_queued_cmd *qc;
[libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2 We very rarely (if ever) complete more than one command in the sactive mask at the time, even for extremely high IO rates. So looping over the entire range of possible tags is pointless, instead use __ffs() to just find the completed tags directly. Updated to clear the tag from the done_mask instead of shifting done_mask down as suggested by From: Tejun Heo <htejun@gmail.com> Verified with a user space tester to produce the same results. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-20 01:44:39 -06:00
unsigned int tag = __ffs(done_mask);
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
[libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2 We very rarely (if ever) complete more than one command in the sactive mask at the time, even for extremely high IO rates. So looping over the entire range of possible tags is pointless, instead use __ffs() to just find the completed tags directly. Updated to clear the tag from the done_mask instead of shifting done_mask down as suggested by From: Tejun Heo <htejun@gmail.com> Verified with a user space tester to produce the same results. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-20 01:44:39 -06:00
qc = ata_qc_from_tag(ap, tag);
if (qc) {
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
ata_qc_complete(qc);
nr_done++;
}
[libata] get rid of ATA_MAX_QUEUE loop in ata_qc_complete_multiple() v2 We very rarely (if ever) complete more than one command in the sactive mask at the time, even for extremely high IO rates. So looping over the entire range of possible tags is pointless, instead use __ffs() to just find the completed tags directly. Updated to clear the tag from the done_mask instead of shifting done_mask down as suggested by From: Tejun Heo <htejun@gmail.com> Verified with a user space tester to produce the same results. Signed-off-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-05-20 01:44:39 -06:00
done_mask &= ~(1 << tag);
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
}
return nr_done;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
* ata_qc_issue - issue taskfile to device
* @qc: command to issue to device
*
* Prepare an ATA command to submission to device.
* This includes mapping the data into a DMA-able
* area, filling in the S/G table, and finally
* writing the taskfile to hardware, starting the command.
*
* LOCKING:
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* spin_lock_irqsave(host lock)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
[PATCH] libata: make ata_qc_issue complete failed qcs There is no reason for the issuer to diddle with a failed qc as the issuer has complete control over when a qc gets freed (usually in ->complete_fn). Make ata_qc_issue() responsible for completing qcs which failed to issue. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 04:41:11 -07:00
void ata_qc_issue(struct ata_queued_cmd *qc)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct ata_port *ap = qc->ap;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_link *link = qc->dev->link;
libata: implement protocol tests Implement protocol tests - ata_is_atapi(), ata_is_nodata(), ata_is_pio(), ata_is_dma(), ata_is_ncq() and ata_is_data() and use them to replace is_atapi_taskfile() and hard coded protocol tests. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:28:53 -07:00
u8 prot = qc->tf.protocol;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
/* Make sure only one non-NCQ command is outstanding. The
* check is skipped for old EH because it reuses active qc to
* request ATAPI sense.
*/
libata: use WARN_ON_ONCE on hot paths Convert WARN_ON() on command issue/completion paths to WARN_ON_ONCE() so that libata doesn't spam the machine even when one of those conditions triggers repeatedly. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 03:19:14 -07:00
WARN_ON_ONCE(ap->ops->error_handler && ata_tag_valid(link->active_tag));
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
libata: convert NCQ test in ata_qc_issue() to ata_is_ncq() I missed one while converting to ata_is_*() protocol test helpers. Convert it. Pointed out by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-04 18:36:13 -07:00
if (ata_is_ncq(prot)) {
libata: use WARN_ON_ONCE on hot paths Convert WARN_ON() on command issue/completion paths to WARN_ON_ONCE() so that libata doesn't spam the machine even when one of those conditions triggers repeatedly. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 03:19:14 -07:00
WARN_ON_ONCE(link->sactive & (1 << qc->tag));
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
if (!link->sactive)
ap->nr_active_links++;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
link->sactive |= 1 << qc->tag;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
} else {
libata: use WARN_ON_ONCE on hot paths Convert WARN_ON() on command issue/completion paths to WARN_ON_ONCE() so that libata doesn't spam the machine even when one of those conditions triggers repeatedly. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 03:19:14 -07:00
WARN_ON_ONCE(link->sactive);
libata-pmp-prep: implement qc_defer helpers Implement ap->nr_active_links (the number of links with active qcs), ap->excl_link (pointer to link which can be used by ->qc_defer and is cleared when a qc with ATA_QCFLAG_CLEAR_EXCL completes), and ata_link_active(). These can be used by ->qc_defer() to implement proper command exclusion. This set of helpers seem enough for both sil24 (ATAPI exclusion needed) and cmd-switching PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
ap->nr_active_links++;
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
link->active_tag = qc->tag;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
}
[PATCH] libata: fix ata_qc_issue failure path On sg_err failure path, ata_qc_issue() doesn't mark the qc active before returning. This triggers WARN_ON() in __ata_qc_complete() when the qc gets completed. This patch moves ap->active_tag and QCFLAG_ACTIVE setting to the top of the function. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 04:36:47 -07:00
qc->flags |= ATA_QCFLAG_ACTIVE;
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
ap->qc_active |= 1 << qc->tag;
[PATCH] libata: fix ata_qc_issue failure path On sg_err failure path, ata_qc_issue() doesn't mark the qc active before returning. This triggers WARN_ON() in __ata_qc_complete() when the qc gets completed. This patch moves ap->active_tag and QCFLAG_ACTIVE setting to the top of the function. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 04:36:47 -07:00
libata: change ATA_QCFLAG_DMAMAP semantics ATA_QCFLAG_DMAMAP was a bit peculiar in that it got set during qc initialization and cleared if DMA mapping wasn't necessary. Make it more straight forward by making the following changes. * Don't set it during initialization. Set it after DMA is actually mapped. * Add BUG_ON() to guarantee that there is data to transfer if DMAMAP is set. This always holds for the current code. The BUG_ON() is for docummentation and sanity check. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-05 00:43:10 -07:00
/* We guarantee to LLDs that they will have at least one
* non-zero sg if the command is a data command.
*/
libata: convert to chained sg libata used private sg iterator to handle padding sg. Now that sg can be chained, padding can be handled using standard sg ops. Convert to chained sg. * s/qc->__sg/qc->sg/ * s/qc->pad_sgent/qc->extra_sg[]/. Because chaining consumes one sg entry. There need to be two extra sg entries. The renaming is also for future addition of other extra sg entries. * Padding setup is moved into ata_sg_setup_extra() which is organized in a way that future addition of other extra sg entries is easy. * qc->orig_n_elem is unused and removed. * qc->n_elem now contains the number of sg entries that LLDs should map. qc->mapped_n_elem is added to carry the original number of mapped sgs for unmapping. * The last sg of the original sg list is used to chain to extra sg list. The original last sg is pointed to by qc->last_sg and the content is stored in qc->saved_last_sg. It's restored during ata_sg_clean(). * All sg walking code has been updated. Unnecessary assertions and checks for conditions the core layer already guarantees are removed. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-05 00:43:11 -07:00
BUG_ON(ata_is_data(prot) && (!qc->sg || !qc->n_elem || !qc->nbytes));
libata: change ATA_QCFLAG_DMAMAP semantics ATA_QCFLAG_DMAMAP was a bit peculiar in that it got set during qc initialization and cleared if DMA mapping wasn't necessary. Make it more straight forward by making the following changes. * Don't set it during initialization. Set it after DMA is actually mapped. * Add BUG_ON() to guarantee that there is data to transfer if DMAMAP is set. This always holds for the current code. The BUG_ON() is for docummentation and sanity check. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-05 00:43:10 -07:00
libata: implement protocol tests Implement protocol tests - ata_is_atapi(), ata_is_nodata(), ata_is_pio(), ata_is_dma(), ata_is_ncq() and ata_is_data() and use them to replace is_atapi_taskfile() and hard coded protocol tests. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:28:53 -07:00
if (ata_is_dma(prot) || (ata_is_pio(prot) &&
libata: change ATA_QCFLAG_DMAMAP semantics ATA_QCFLAG_DMAMAP was a bit peculiar in that it got set during qc initialization and cleared if DMA mapping wasn't necessary. Make it more straight forward by making the following changes. * Don't set it during initialization. Set it after DMA is actually mapped. * Add BUG_ON() to guarantee that there is data to transfer if DMAMAP is set. This always holds for the current code. The BUG_ON() is for docummentation and sanity check. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-05 00:43:10 -07:00
(ap->flags & ATA_FLAG_PIO_DMA)))
libata: kill non-sg DMA interface With atapi_request_sense() converted to use sg, there's no user of non-sg interface. Kill non-sg interface. * ATA_QCFLAG_SINGLE and ATA_QCFLAG_SG are removed. ATA_QCFLAG_DMAMAP is used instead. (this way no LLD change is necessary) * qc->buf_virt is removed. * ata_sg_init_one() and ata_sg_setup_one() are removed. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Rusty Russel <rusty@rustcorp.com.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-05 00:43:09 -07:00
if (ata_sg_setup(qc))
goto sg_err;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: prefer hardreset When both soft and hard resets are available, libata preferred softreset till now. The logic behind it was to be softer to devices; however, this doesn't really help much. Rationales for the change: * BIOS may freeze lock certain things during boot and softreset can't unlock those. This by itself is okay but during operation PHY event or other error conditions can trigger hardreset and the device may end up with different configuration. For example, after a hardreset, previously unlockable HPA can be unlocked resulting in different device size and thus revalidation failure. Similar condition can occur during or after resume. * Certain ATAPI devices require hardreset to recover after certain error conditions. On PATA, this is done by issuing the DEVICE RESET command. On SATA, COMRESET has equivalent effect. The problem is that DEVICE RESET needs its own execution protocol. For SFF controllers with bare TF access, it can be easily implemented but more advanced controllers (e.g. ahci and sata_sil24) require specialized implementations. Simply using hardreset solves the problem nicely. * COMRESET initialization sequence is the norm in SATA land and many SATA devices don't work properly if only SRST is used. For example, some PMPs behave this way and libata works around by always issuing hardreset if the host supports PMP. Like the above example, libata has developed a number of mechanisms aiming to promote softreset to hardreset if softreset is not going to work. This approach is time consuming and error prone. Also, note that, dependingon how you read the specs, it could be argued that PMP fan-out ports require COMRESET to start operation. In fact, all the PMPs on the market except one don't work properly if COMRESET is not issued to fan-out ports after PMP reset. * COMRESET is an integral part of SATA connection and any working device should be able to handle COMRESET properly. After all, it's the way to signal hardreset during reboot. This is the most used and recommended (at least by the ahci spec) method of resetting devices. So, this patch makes libata prefer hardreset over softreset by making the following changes. * Rename ATA_EH_RESET_MASK to ATA_EH_RESET and use it whereever ATA_EH_{SOFT|HARD}RESET used to be used. ATA_EH_{SOFT|HARD}RESET is now only used to tell prereset whether soft or hard reset will be issued. * Strip out now unneeded promote-to-hardreset logics from ata_eh_reset(), ata_std_prereset(), sata_pmp_std_prereset() and other places. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-01-23 08:05:14 -07:00
/* if device is sleeping, schedule reset and abort the link */
libata: track SLEEP state and issue SRST to wake it up ATA devices in SLEEP mode don't respond to any commands. SRST is necessary to wake it up. Till now, when a command is issued to a device in SLEEP mode, the command times out, which makes EH reset the device and retry the command after that, causing a long delay. This patch makes libata track SLEEP state and issue SRST automatically if a command is about to be issued to a device in SLEEP. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Bruce Allen <ballen@gravity.phys.uwm.edu> Cc: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25 03:30:36 -06:00
if (unlikely(qc->dev->flags & ATA_DFLAG_SLEEPING)) {
libata: prefer hardreset When both soft and hard resets are available, libata preferred softreset till now. The logic behind it was to be softer to devices; however, this doesn't really help much. Rationales for the change: * BIOS may freeze lock certain things during boot and softreset can't unlock those. This by itself is okay but during operation PHY event or other error conditions can trigger hardreset and the device may end up with different configuration. For example, after a hardreset, previously unlockable HPA can be unlocked resulting in different device size and thus revalidation failure. Similar condition can occur during or after resume. * Certain ATAPI devices require hardreset to recover after certain error conditions. On PATA, this is done by issuing the DEVICE RESET command. On SATA, COMRESET has equivalent effect. The problem is that DEVICE RESET needs its own execution protocol. For SFF controllers with bare TF access, it can be easily implemented but more advanced controllers (e.g. ahci and sata_sil24) require specialized implementations. Simply using hardreset solves the problem nicely. * COMRESET initialization sequence is the norm in SATA land and many SATA devices don't work properly if only SRST is used. For example, some PMPs behave this way and libata works around by always issuing hardreset if the host supports PMP. Like the above example, libata has developed a number of mechanisms aiming to promote softreset to hardreset if softreset is not going to work. This approach is time consuming and error prone. Also, note that, dependingon how you read the specs, it could be argued that PMP fan-out ports require COMRESET to start operation. In fact, all the PMPs on the market except one don't work properly if COMRESET is not issued to fan-out ports after PMP reset. * COMRESET is an integral part of SATA connection and any working device should be able to handle COMRESET properly. After all, it's the way to signal hardreset during reboot. This is the most used and recommended (at least by the ahci spec) method of resetting devices. So, this patch makes libata prefer hardreset over softreset by making the following changes. * Rename ATA_EH_RESET_MASK to ATA_EH_RESET and use it whereever ATA_EH_{SOFT|HARD}RESET used to be used. ATA_EH_{SOFT|HARD}RESET is now only used to tell prereset whether soft or hard reset will be issued. * Strip out now unneeded promote-to-hardreset logics from ata_eh_reset(), ata_std_prereset(), sata_pmp_std_prereset() and other places. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-01-23 08:05:14 -07:00
link->eh_info.action |= ATA_EH_RESET;
libata: track SLEEP state and issue SRST to wake it up ATA devices in SLEEP mode don't respond to any commands. SRST is necessary to wake it up. Till now, when a command is issued to a device in SLEEP mode, the command times out, which makes EH reset the device and retry the command after that, causing a long delay. This patch makes libata track SLEEP state and issue SRST automatically if a command is about to be issued to a device in SLEEP. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Bruce Allen <ballen@gravity.phys.uwm.edu> Cc: Andrew Paprocki <andrew@ishiboo.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-25 03:30:36 -06:00
ata_ehi_push_desc(&link->eh_info, "waking up from sleep");
ata_link_abort(link);
return;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ap->ops->qc_prep(qc);
[PATCH] libata: make ata_qc_issue complete failed qcs There is no reason for the issuer to diddle with a failed qc as the issuer has complete control over when a qc gets freed (usually in ->complete_fn). Make ata_qc_issue() responsible for completing qcs which failed to issue. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 04:41:11 -07:00
qc->err_mask |= ap->ops->qc_issue(qc);
if (unlikely(qc->err_mask))
goto err;
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: fix ata_qc_issue() error handling When ata_qc_issue() fails, the qc might have been dma mapped or not. So, performing only ata_qc_free() results in dma map leak. This patch makes ata_qc_issue() mark dma map flags correctly on failure and calls ata_qc_complete() after ata_qc_issue() fails. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:36 -07:00
sg_err:
[PATCH] libata: make ata_qc_issue complete failed qcs There is no reason for the issuer to diddle with a failed qc as the issuer has complete control over when a qc gets freed (usually in ->complete_fn). Make ata_qc_issue() responsible for completing qcs which failed to issue. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-31 04:41:11 -07:00
qc->err_mask |= AC_ERR_SYSTEM;
err:
ata_qc_complete(qc);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
/**
* sata_scr_valid - test whether SCRs are accessible
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: ATA link to test SCR accessibility for
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Test whether SCRs are accessible for @link.
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
* LOCKING:
* None.
*
* RETURNS:
* 1 if SCRs are accessible, 0 otherwise.
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int sata_scr_valid(struct ata_link *link)
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
{
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
struct ata_port *ap = link->ap;
libata: replace ap->cbl tests with ATA_FLAG_SATA tests ap->cbl == ATA_CBL_SATA indicates SATA cable while ap->flags & ATA_FLAG_SATA indicates SATA host port. Till now they always gave the same result but SATA/PATA bridge handling will change that. Switch to ATA_FLAG_SATA test if we're testing for host port type. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21 10:33:47 -06:00
return (ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read;
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
}
/**
* sata_scr_read - read SCR register of the specified port
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: ATA link to read SCR for
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
* @reg: SCR to read
* @val: Place to store read value
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Read SCR register @reg of @link into *@val. This function is
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
* guaranteed to succeed if @link is ap->link, the cable type of
* the port is SATA and the port implements ->scr_read.
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
* LOCKING:
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
* None if @link is ap->link. Kernel thread context otherwise.
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
* RETURNS:
* 0 on success, negative errno on failure.
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int sata_scr_read(struct ata_link *link, int reg, u32 *val)
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
{
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
if (ata_is_host_link(link)) {
if (sata_scr_valid(link))
libata: make SCR access ops per-link Logically, SCR access ops should take @link; however, there was no compelling reason to convert all SCR access ops when adding @link abstraction as there's one-to-one mapping between a port and a non-PMP link. However, that assumption won't hold anymore with the scheduled addition of slave link. Make SCR access ops per-link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:40 -06:00
return link->ap->ops->scr_read(link, reg, val);
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
return -EOPNOTSUPP;
}
return sata_pmp_scr_read(link, reg, val);
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
}
/**
* sata_scr_write - write SCR register of the specified port
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: ATA link to write SCR for
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
* @reg: SCR to write
* @val: value to write
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Write @val to SCR register @reg of @link. This function is
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
* guaranteed to succeed if @link is ap->link, the cable type of
* the port is SATA and the port implements ->scr_read.
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
* LOCKING:
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
* None if @link is ap->link. Kernel thread context otherwise.
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
* RETURNS:
* 0 on success, negative errno on failure.
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int sata_scr_write(struct ata_link *link, int reg, u32 val)
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
{
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
if (ata_is_host_link(link)) {
if (sata_scr_valid(link))
libata: make SCR access ops per-link Logically, SCR access ops should take @link; however, there was no compelling reason to convert all SCR access ops when adding @link abstraction as there's one-to-one mapping between a port and a non-PMP link. However, that assumption won't hold anymore with the scheduled addition of slave link. Make SCR access ops per-link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:40 -06:00
return link->ap->ops->scr_write(link, reg, val);
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
return -EOPNOTSUPP;
}
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
return sata_pmp_scr_write(link, reg, val);
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
}
/**
* sata_scr_write_flush - write SCR register of the specified port and flush
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: ATA link to write SCR for
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
* @reg: SCR to write
* @val: value to write
*
* This function is identical to sata_scr_write() except that this
* function performs flush after writing to the register.
*
* LOCKING:
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
* None if @link is ap->link. Kernel thread context otherwise.
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
* RETURNS:
* 0 on success, negative errno on failure.
*/
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int sata_scr_write_flush(struct ata_link *link, int reg, u32 val)
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
{
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
if (ata_is_host_link(link)) {
int rc;
libata: make ->scr_read/write callbacks return error code Convert ->scr_read/write callbacks to return error code to better indicate failure. This will help handling of SCR_NOTIFICATION. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:40 -06:00
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
if (sata_scr_valid(link)) {
libata: make SCR access ops per-link Logically, SCR access ops should take @link; however, there was no compelling reason to convert all SCR access ops when adding @link abstraction as there's one-to-one mapping between a port and a non-PMP link. However, that assumption won't hold anymore with the scheduled addition of slave link. Make SCR access ops per-link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:40 -06:00
rc = link->ap->ops->scr_write(link, reg, val);
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
if (rc == 0)
libata: make SCR access ops per-link Logically, SCR access ops should take @link; however, there was no compelling reason to convert all SCR access ops when adding @link abstraction as there's one-to-one mapping between a port and a non-PMP link. However, that assumption won't hold anymore with the scheduled addition of slave link. Make SCR access ops per-link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:40 -06:00
rc = link->ap->ops->scr_read(link, reg, &val);
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
return rc;
}
return -EOPNOTSUPP;
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
}
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
return sata_pmp_scr_write(link, reg, val);
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
}
/**
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
* ata_phys_link_online - test whether the given link is online
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: ATA link to test
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Test whether @link is online. Note that this function returns
* 0 if online status of @link cannot be obtained, so
* ata_link_online(link) != !ata_link_offline(link).
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
* LOCKING:
* None.
*
* RETURNS:
libata: misc updates to prepare for slave link * Add ATA_EH_ALL_ACTIONS. * Make sata_link_{on|off}_line() return bool instead of int. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:42 -06:00
* True if the port online status is available and online.
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*/
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
bool ata_phys_link_online(struct ata_link *link)
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
{
u32 sstatus;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
libata: check onlineness before using SPD in sata_down_spd_limit() sata_down_spd_limit() should check whether the link is online before using the SPD value to determine how to limit the link speed. Factor out onlineness test and test it from sata_down_spd_limit(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:31 -07:00
ata_sstatus_online(sstatus))
libata: misc updates to prepare for slave link * Add ATA_EH_ALL_ACTIONS. * Make sata_link_{on|off}_line() return bool instead of int. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:42 -06:00
return true;
return false;
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
}
/**
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
* ata_phys_link_offline - test whether the given link is offline
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @link: ATA link to test
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* Test whether @link is offline. Note that this function
* returns 0 if offline status of @link cannot be obtained, so
* ata_link_online(link) != !ata_link_offline(link).
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*
* LOCKING:
* None.
*
* RETURNS:
libata: misc updates to prepare for slave link * Add ATA_EH_ALL_ACTIONS. * Make sata_link_{on|off}_line() return bool instead of int. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:42 -06:00
* True if the port offline status is available and offline.
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
*/
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
bool ata_phys_link_offline(struct ata_link *link)
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
{
u32 sstatus;
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
libata: check onlineness before using SPD in sata_down_spd_limit() sata_down_spd_limit() should check whether the link is online before using the SPD value to determine how to limit the link speed. Factor out onlineness test and test it from sata_down_spd_limit(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:31 -07:00
!ata_sstatus_online(sstatus))
libata: misc updates to prepare for slave link * Add ATA_EH_ALL_ACTIONS. * Make sata_link_{on|off}_line() return bool instead of int. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:42 -06:00
return true;
return false;
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
}
libata: update inline source docs
2005-06-02 16:17:13 -06:00
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
/**
* ata_link_online - test whether the given link is online
* @link: ATA link to test
*
* Test whether @link is online. This is identical to
* ata_phys_link_online() when there's no slave link. When
* there's a slave link, this function should only be called on
* the master link and will return true if any of M/S links is
* online.
*
* LOCKING:
* None.
*
* RETURNS:
* True if the port online status is available and online.
*/
bool ata_link_online(struct ata_link *link)
{
struct ata_link *slave = link->ap->slave_link;
WARN_ON(link == slave); /* shouldn't be called on slave link */
return ata_phys_link_online(link) ||
(slave && ata_phys_link_online(slave));
}
/**
* ata_link_offline - test whether the given link is offline
* @link: ATA link to test
*
* Test whether @link is offline. This is identical to
* ata_phys_link_offline() when there's no slave link. When
* there's a slave link, this function should only be called on
* the master link and will return true if both M/S links are
* offline.
*
* LOCKING:
* None.
*
* RETURNS:
* True if the port offline status is available and offline.
*/
bool ata_link_offline(struct ata_link *link)
{
struct ata_link *slave = link->ap->slave_link;
WARN_ON(link == slave); /* shouldn't be called on slave link */
return ata_phys_link_offline(link) &&
(!slave || ata_phys_link_offline(slave));
}
libata: add CONFIG_PM to libata core layer Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 01:32:47 -07:00
#ifdef CONFIG_PM
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
static int ata_host_request_pm(struct ata_host *host, pm_message_t mesg,
unsigned int action, unsigned int ehi_flags,
int wait)
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
{
unsigned long flags;
int i, rc;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
libata-link: update Power Management to handle PMP links Update Power Management to consider PMP links. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:24 -06:00
struct ata_link *link;
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
/* Previous resume operation might still be in
* progress. Wait for PM_PENDING to clear.
*/
if (ap->pflags & ATA_PFLAG_PM_PENDING) {
ata_port_wait_eh(ap);
WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
}
/* request PM ops to EH */
spin_lock_irqsave(ap->lock, flags);
ap->pm_mesg = mesg;
if (wait) {
rc = 0;
ap->pm_result = &rc;
}
ap->pflags |= ATA_PFLAG_PM_PENDING;
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
ata_for_each_link(link, ap, HOST_FIRST) {
libata-link: update Power Management to handle PMP links Update Power Management to consider PMP links. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:24 -06:00
link->eh_info.action |= action;
link->eh_info.flags |= ehi_flags;
}
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
ata_port_schedule_eh(ap);
spin_unlock_irqrestore(ap->lock, flags);
/* wait and check result */
if (wait) {
ata_port_wait_eh(ap);
WARN_ON(ap->pflags & ATA_PFLAG_PM_PENDING);
if (rc)
return rc;
}
}
return 0;
}
/**
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* ata_host_suspend - suspend host
* @host: host to suspend
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
* @mesg: PM message
*
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* Suspend @host. Actual operation is performed by EH. This
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
* function requests EH to perform PM operations and waits for EH
* to finish.
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* 0 on success, -errno on failure.
*/
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
int ata_host_suspend(struct ata_host *host, pm_message_t mesg)
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
{
libata: reimplement suspend/resume support using sdev->manage_start_stop Reimplement suspend/resume support using sdev->manage_start_stop. * Device suspend/resume is now SCSI layer's responsibility and the code is simplified a lot. * DPM is dropped. This also simplifies code a lot. Suspend/resume status is port-wide now. * ata_scsi_device_suspend/resume() and ata_dev_ready() removed. * Resume now has to wait for disk to spin up before proceeding. I couldn't find easy way out as libata is in EH waiting for the disk to be ready and sd is waiting for EH to complete to issue START_STOP. * sdev->manage_start_stop is set to 1 in ata_scsi_slave_config(). This fixes spindown on shutdown and suspend-to-disk. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-04 13:27:47 -06:00
int rc;
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
/*
* disable link pm on all ports before requesting
* any pm activity
*/
ata_lpm_enable(host);
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
rc = ata_host_request_pm(host, mesg, 0, ATA_EHI_QUIET, 1);
Revert "power_state: get rid of write-only variable in SATA" This reverts commit 559bbe6cbd0d8c68d40076a5f7dc98e3bf5864b2. Michael S. Tsirkin reports that this changes breaks suspend/resume. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-25 15:31:10 -07:00
if (rc == 0)
host->dev->power.power_state = mesg;
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
return rc;
}
/**
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* ata_host_resume - resume host
* @host: host to resume
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
*
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* Resume @host. Actual operation is performed by EH. This
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
* function requests EH to perform PM operations and returns.
* Note that all resume operations are performed parallely.
*
* LOCKING:
* Kernel thread context (may sleep).
*/
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
void ata_host_resume(struct ata_host *host)
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
{
libata: prefer hardreset When both soft and hard resets are available, libata preferred softreset till now. The logic behind it was to be softer to devices; however, this doesn't really help much. Rationales for the change: * BIOS may freeze lock certain things during boot and softreset can't unlock those. This by itself is okay but during operation PHY event or other error conditions can trigger hardreset and the device may end up with different configuration. For example, after a hardreset, previously unlockable HPA can be unlocked resulting in different device size and thus revalidation failure. Similar condition can occur during or after resume. * Certain ATAPI devices require hardreset to recover after certain error conditions. On PATA, this is done by issuing the DEVICE RESET command. On SATA, COMRESET has equivalent effect. The problem is that DEVICE RESET needs its own execution protocol. For SFF controllers with bare TF access, it can be easily implemented but more advanced controllers (e.g. ahci and sata_sil24) require specialized implementations. Simply using hardreset solves the problem nicely. * COMRESET initialization sequence is the norm in SATA land and many SATA devices don't work properly if only SRST is used. For example, some PMPs behave this way and libata works around by always issuing hardreset if the host supports PMP. Like the above example, libata has developed a number of mechanisms aiming to promote softreset to hardreset if softreset is not going to work. This approach is time consuming and error prone. Also, note that, dependingon how you read the specs, it could be argued that PMP fan-out ports require COMRESET to start operation. In fact, all the PMPs on the market except one don't work properly if COMRESET is not issued to fan-out ports after PMP reset. * COMRESET is an integral part of SATA connection and any working device should be able to handle COMRESET properly. After all, it's the way to signal hardreset during reboot. This is the most used and recommended (at least by the ahci spec) method of resetting devices. So, this patch makes libata prefer hardreset over softreset by making the following changes. * Rename ATA_EH_RESET_MASK to ATA_EH_RESET and use it whereever ATA_EH_{SOFT|HARD}RESET used to be used. ATA_EH_{SOFT|HARD}RESET is now only used to tell prereset whether soft or hard reset will be issued. * Strip out now unneeded promote-to-hardreset logics from ata_eh_reset(), ata_std_prereset(), sata_pmp_std_prereset() and other places. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-01-23 08:05:14 -07:00
ata_host_request_pm(host, PMSG_ON, ATA_EH_RESET,
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, 0);
Revert "power_state: get rid of write-only variable in SATA" This reverts commit 559bbe6cbd0d8c68d40076a5f7dc98e3bf5864b2. Michael S. Tsirkin reports that this changes breaks suspend/resume. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-02-25 15:31:10 -07:00
host->dev->power.power_state = PMSG_ON;
[libata] Link power management infrastructure Device Initiated Power Management, which is defined in SATA 2.5 can be enabled for disks which support it. This patch enables DIPM when the user sets the link power management policy to "min_power". Additionally, libata drivers can define a function (enable_pm) that will perform hardware specific actions to enable whatever power management policy the user set up for Host Initiated Power management (HIPM). This power management policy will be activated after all disks have been enumerated and intialized. Drivers should also define disable_pm, which will turn off link power management, but not change link power management policy. Documentation/scsi/link_power_management_policy.txt has additional information. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-24 22:58:59 -06:00
/* reenable link pm */
ata_lpm_disable(host);
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
}
libata: add CONFIG_PM to libata core layer Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 01:32:47 -07:00
#endif
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
Various libata documentation updates. This is a merger of libata docs + cleanups from Martin Waitz <tali@admingilde.org> and me. From: Randy Dunlap <rdunlap@xenotime.net> From: Martin Waitz <tali@admingilde.org> Fix libata kernel-doc comments to match code. Add some function parameters to kernel-doc. Fix some typos/spellos. Put comments in <= 80 columns. Make one DPRINTK string unique. Fix sparse cast warnings. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-28 11:15:32 -07:00
/**
* ata_port_start - Set port up for dma.
* @ap: Port to initialize
*
* Called just after data structures for each port are
* initialized. Allocates space for PRD table.
*
* May be used as the port_start() entry in ata_port_operations.
*
* LOCKING:
* Inherited from caller.
*/
libata: update libata core layer to use devres Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:28 -07:00
int ata_port_start(struct ata_port *ap)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
[PATCH] libata: Remove dependence on host_set->dev for SAS Remove some of the dependence on the host_set struct in preparation for supporting SAS HBAs. Adds a struct device pointer to the ata_port struct. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-23 16:30:15 -07:00
struct device *dev = ap->dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: update libata core layer to use devres Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:28 -07:00
ap->prd = dmam_alloc_coherent(dev, ATA_PRD_TBL_SZ, &ap->prd_dma,
GFP_KERNEL);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (!ap->prd)
return -ENOMEM;
return 0;
}
[PATCH] libata-hp-prep: implement ata_dev_init() Move initialization of struct ata_device into ata_dev_init() in preparation for hotplug. This patch calls ata_dev_init() from ata_host_init() and thus makes no functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:30 -06:00
/**
* ata_dev_init - Initialize an ata_device structure
* @dev: Device structure to initialize
*
* Initialize @dev in preparation for probing.
*
* LOCKING:
* Inherited from caller.
*/
void ata_dev_init(struct ata_device *dev)
{
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
struct ata_link *link = ata_dev_phys_link(dev);
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
struct ata_port *ap = link->ap;
[PATCH] libata-hp-prep: make some ata_device fields persistent Lifetimes of some fields span over device plugging/unplugging. This patch moves such persistent fields to the top of ata_device and separate them with ATA_DEVICE_CLEAR_OFFSET. Fields above the offset are initialized once during host initializatino while all other fields are cleared before hotplugging. Currently ->ap, devno and part of flags are persistent. Note that flags is partially cleared while holding host_set lock. This is to synchronize with later warm plug implementation which will record hotplug request in dev->flags. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:32 -06:00
unsigned long flags;
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
/* SATA spd limit is bound to the attached device, reset together */
libata-link: introduce ata_link Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:22 -06:00
link->sata_spd_limit = link->hw_sata_spd_limit;
link->sata_spd = 0;
[PATCH] libata-hp-prep: implement ap->hw_sata_spd_limit Add ap->hw_sata_spd_limit and initialize it once during the boot initialization (or driver load initialization). ap->sata_spd_limit is reset to ap->hw_sata_spd_limit on hotplug. This prevents spd limits introduced by earlier devices from affecting new devices. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:38 -06:00
[PATCH] libata-hp-prep: make some ata_device fields persistent Lifetimes of some fields span over device plugging/unplugging. This patch moves such persistent fields to the top of ata_device and separate them with ATA_DEVICE_CLEAR_OFFSET. Fields above the offset are initialized once during host initializatino while all other fields are cleared before hotplugging. Currently ->ap, devno and part of flags are persistent. Note that flags is partially cleared while holding host_set lock. This is to synchronize with later warm plug implementation which will record hotplug request in dev->flags. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:32 -06:00
/* High bits of dev->flags are used to record warm plug
* requests which occur asynchronously. Synchronize using
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* host lock.
[PATCH] libata-hp-prep: make some ata_device fields persistent Lifetimes of some fields span over device plugging/unplugging. This patch moves such persistent fields to the top of ata_device and separate them with ATA_DEVICE_CLEAR_OFFSET. Fields above the offset are initialized once during host initializatino while all other fields are cleared before hotplugging. Currently ->ap, devno and part of flags are persistent. Note that flags is partially cleared while holding host_set lock. This is to synchronize with later warm plug implementation which will record hotplug request in dev->flags. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:32 -06:00
*/
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_lock_irqsave(ap->lock, flags);
[PATCH] libata-hp-prep: make some ata_device fields persistent Lifetimes of some fields span over device plugging/unplugging. This patch moves such persistent fields to the top of ata_device and separate them with ATA_DEVICE_CLEAR_OFFSET. Fields above the offset are initialized once during host initializatino while all other fields are cleared before hotplugging. Currently ->ap, devno and part of flags are persistent. Note that flags is partially cleared while holding host_set lock. This is to synchronize with later warm plug implementation which will record hotplug request in dev->flags. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:32 -06:00
dev->flags &= ~ATA_DFLAG_INIT_MASK;
libata clear horkage on ata_dev_init() dev->horkage should be cleared over device hotunplug/plug. Clear it in ata_dev_init(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-02 21:20:11 -06:00
dev->horkage = 0;
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_unlock_irqrestore(ap->lock, flags);
[PATCH] libata-hp-prep: implement ata_dev_init() Move initialization of struct ata_device into ata_dev_init() in preparation for hotplug. This patch calls ata_dev_init() from ata_host_init() and thus makes no functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:30 -06:00
libata: clear dev->ering in smarter way dev->ering used to be cleared together with the rest of ata_device in ata_dev_init() which is called whenever a probing event occurs. dev->ering is about to be used to track probing failures so it needs to remain persistent over multiple porbing events. This patch achieves this by doing the following. * Instead of CLEAR_OFFSET, define CLEAR_BEGIN and CLEAR_END and only clear between BEGIN and END. ering is moved after END. The split of persistent area is to allow hotter items remain at the head. * ering is explicitly cleared on ata_dev_disable() and when device attach succeeds. So, ering is persistent throug a device's life time (unless explicitly cleared of course) and also through periods inbetween disablement of an attached device and successful detection of the next one. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-29 04:31:32 -07:00
memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
[PATCH] libata-hp-prep: implement ata_dev_init() Move initialization of struct ata_device into ata_dev_init() in preparation for hotplug. This patch calls ata_dev_init() from ata_host_init() and thus makes no functional difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:30 -06:00
dev->pio_mask = UINT_MAX;
dev->mwdma_mask = UINT_MAX;
dev->udma_mask = UINT_MAX;
}
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
/**
* ata_link_init - Initialize an ata_link structure
* @ap: ATA port link is attached to
* @link: Link structure to initialize
libata-link: add PMP links Add link->pmp, ap->nr_pmp_links, ap->pmp_link[], and implement/update link helpers. printk helpers are updated such that port and link are identifed as 'ataP:' if no PMP is attached, while device is identified as 'ataP.DD:'. If PMP is attached, they become 'ataP:', 'ataP.LL:' and 'ataP.LL' - ie. link and device are identified their PMP number. If PPM is attached (ap->nr_pmp_links != 0), ata_for_each_link() iterates over PMP links, while __ata_for_each_link() iterates over the host link + PMP links. If PMP is not attached (ap->nr_pmp_links == 0), both iterate over only the host link. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
* @pmp: Port multiplier port number
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
*
* Initialize @link.
*
* LOCKING:
* Kernel thread context (may sleep)
*/
libata-pmp-prep: make a number of functions global to libata Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
{
int i;
/* clear everything except for devices */
memset(link, 0, offsetof(struct ata_link, device[0]));
link->ap = ap;
libata-link: add PMP links Add link->pmp, ap->nr_pmp_links, ap->pmp_link[], and implement/update link helpers. printk helpers are updated such that port and link are identifed as 'ataP:' if no PMP is attached, while device is identified as 'ataP.DD:'. If PMP is attached, they become 'ataP:', 'ataP.LL:' and 'ataP.LL' - ie. link and device are identified their PMP number. If PPM is attached (ap->nr_pmp_links != 0), ata_for_each_link() iterates over PMP links, while __ata_for_each_link() iterates over the host link + PMP links. If PMP is not attached (ap->nr_pmp_links == 0), both iterate over only the host link. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
link->pmp = pmp;
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
link->active_tag = ATA_TAG_POISON;
link->hw_sata_spd_limit = UINT_MAX;
/* can't use iterator, ap isn't initialized yet */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &link->device[i];
dev->link = link;
dev->devno = dev - link->device;
libata: make gtf_filter per-dev Add ->gtf_filter to ata_device and set it to ata_acpi_gtf_filter when initializing ata_link. This is to allow quirks which apply different gtf filters. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-15 13:17:28 -06:00
#ifdef CONFIG_ATA_ACPI
dev->gtf_filter = ata_acpi_gtf_filter;
#endif
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
ata_dev_init(dev);
}
}
/**
* sata_link_init_spd - Initialize link->sata_spd_limit
* @link: Link to configure sata_spd_limit for
*
* Initialize @link->[hw_]sata_spd_limit to the currently
* configured value.
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* 0 on success, -errno on failure.
*/
libata-pmp-prep: make a number of functions global to libata Make a number of functions from libata-core.c and libata-eh.c global to libata (drivers/ata/libata.h). These will be used by PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
int sata_link_init_spd(struct ata_link *link)
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
{
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
u8 spd;
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
int rc;
libata: restore SControl on detach Save SControl during probing and restore it on detach. This prevents adjustments made by libata drivers to seep into the next driver which gets attached (be it a libata one or not). It's not clear whether SControl also needs to be restored on suspend. The next system to have control (ACPI or kexec'd kernel) would probably like to see the original SControl value but there's no guarantee that a link is gonna keep working after SControl is adjusted without a reset and adding a reset and modified recovery cycle soley for this is an overkill. For now, do it only for detach. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 01:09:34 -06:00
rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (rc)
return rc;
libata: restore SControl on detach Save SControl during probing and restore it on detach. This prevents adjustments made by libata drivers to seep into the next driver which gets attached (be it a libata one or not). It's not clear whether SControl also needs to be restored on suspend. The next system to have control (ACPI or kexec'd kernel) would probably like to see the original SControl value but there's no guarantee that a link is gonna keep working after SControl is adjusted without a reset and adding a reset and modified recovery cycle soley for this is an overkill. For now, do it only for detach. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 01:09:34 -06:00
spd = (link->saved_scontrol >> 4) & 0xf;
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
if (spd)
link->hw_sata_spd_limit &= (1 << spd) - 1;
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
ata_force_link_limits(link);
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
link->sata_spd_limit = link->hw_sata_spd_limit;
return 0;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
* ata_port_alloc - allocate and initialize basic ATA port resources
* @host: ATA host this allocated port belongs to
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
* Allocate and initialize basic ATA port resources.
*
* RETURNS:
* Allocate ATA port on success, NULL on failure.
libata: doc updates
2005-05-30 17:49:12 -06:00
*
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
* LOCKING:
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
* Inherited from calling layer (may sleep).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*/
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
struct ata_port *ata_port_alloc(struct ata_host *host)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
struct ata_port *ap;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
DPRINTK("ENTER\n");
ap = kzalloc(sizeof(*ap), GFP_KERNEL);
if (!ap)
return NULL;
libata: ignore EH scheduling during initialization libata enables SCSI host during ATA host activation which happens after IRQ handler is registered and IRQ is enabled. All ATA ports are in frozen state when IRQ is enabled but frozen ports may raise limited number of IRQs after being frozen - IOW, ->freeze() is not responsible for clearing pending IRQs. During normal operation, the IRQ handler is responsible for clearing spurious IRQs on frozen ports and it usually doesn't require any extra code. Unfortunately, during host initialization, the IRQ handler can end up scheduling EH for a port whose SCSI host isn't initialized yet. This results in OOPS in the SCSI midlayer. This is relatively short window and scheduling EH for probing is the first thing libata does after initialization, so ignoring EH scheduling until initialization is complete solves the problem nicely. This problem was spotted by Berck E. Nash in the following thread. http://thread.gmane.org/gmane.linux.kernel/519412 Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Berck E. Nash <flyboy@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-01 03:50:15 -06:00
ap->pflags |= ATA_PFLAG_INITIALIZING;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
ap->lock = &host->lock;
[PATCH] libata: rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED Rename ATA_FLAG_PORT_DISABLED to ATA_FLAG_DISABLED for consistency. (ATA_FLAG_* are always about ports). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:52 -06:00
ap->flags = ATA_FLAG_DISABLED;
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
ap->print_id = -1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ap->ctl = ATA_DEVCTL_OBS;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
ap->host = host;
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
ap->dev = host->dev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ap->last_ctl = 0xFF;
libata: Adjust initial debugging levels through preprocessor defines. Signed-off-by: <petkov@uni-muenster.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11 21:17:01 -06:00
#if defined(ATA_VERBOSE_DEBUG)
/* turn on all debugging levels */
ap->msg_enable = 0x00FF;
#elif defined(ATA_DEBUG)
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_INFO | ATA_MSG_CTL | ATA_MSG_WARN | ATA_MSG_ERR;
[PATCH] libata: cosmetic updates Cosmetic updates in libata-core.c. * trim trailing whitespaces * break lines which are over 80 column * kill unnecessary braces * make indentation consistent Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-25 05:00:35 -06:00
#else
[libata] conversion to new debug scheme, part 1 of $N The first 25% of libata-core.c converted to the new debugging scheme. Signed-off-by: <petkov@math.uni-muenster.de> (with addition of ATA_MSG_WARN to standard msg_enable by me) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-23 00:29:08 -06:00
ap->msg_enable = ATA_MSG_DRV | ATA_MSG_ERR | ATA_MSG_WARN;
libata: Adjust initial debugging levels through preprocessor defines. Signed-off-by: <petkov@uni-muenster.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-11 21:17:01 -06:00
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: make SFF support optional Now that SFF support is completely separated out from the core layer, it can be made optional. Add CONFIG_ATA_SFF and let SFF drivers depend on it. If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c and data structures for SFF support are disabled. This saves good number of bytes for small systems. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:21 -06:00
#ifdef CONFIG_ATA_SFF
libata: make ata_port_queue_task() an internal function ata_port_queue_task() served a single user: ata_pio_task() Rename to ata_pio_queue_task() and un-export it, as nobody outside of libata-core.c uses it. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-12-19 02:25:10 -07:00
INIT_DELAYED_WORK(&ap->port_task, ata_pio_task);
libata: initialize port_task when !CONFIG_ATA_SFF ap->port_task was not initialized if !CONFIG_ATA_SFF later triggering lockdep warning. Make sure it's initialized. Reported by Larry Finger. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-10-19 22:11:56 -06:00
#else
INIT_DELAYED_WORK(&ap->port_task, NULL);
libata: make SFF support optional Now that SFF support is completely separated out from the core layer, it can be made optional. Add CONFIG_ATA_SFF and let SFF drivers depend on it. If CONFIG_ATA_SFF isn't set, all codes in libata-sff.c and data structures for SFF support are disabled. This saves good number of bytes for small systems. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:21 -06:00
#endif
WorkStruct: Pass the work_struct pointer instead of context data Pass the work_struct pointer to the work function rather than context data. The work function can use container_of() to work out the data. For the cases where the container of the work_struct may go away the moment the pending bit is cleared, it is made possible to defer the release of the structure by deferring the clearing of the pending bit. To make this work, an extra flag is introduced into the management side of the work_struct. This governs auto-release of the structure upon execution. Ordinarily, the work queue executor would release the work_struct for further scheduling or deallocation by clearing the pending bit prior to jumping to the work function. This means that, unless the driver makes some guarantee itself that the work_struct won't go away, the work function may not access anything else in the work_struct or its container lest they be deallocated.. This is a problem if the auxiliary data is taken away (as done by the last patch). However, if the pending bit is *not* cleared before jumping to the work function, then the work function *may* access the work_struct and its container with no problems. But then the work function must itself release the work_struct by calling work_release(). In most cases, automatic release is fine, so this is the default. Special initiators exist for the non-auto-release case (ending in _NAR). Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-22 07:55:48 -07:00
INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug);
INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan);
[PATCH] libata: implement and apply ata_eh_qc_complete/retry() Implement ata_eh_qc_complete/retry() using scsi_eh_finish_cmd() and scsi_eh_flush_done_q(). This removes all eh scsicmd finish hacks from low level drivers. This change was first suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-22 21:09:37 -07:00
INIT_LIST_HEAD(&ap->eh_done_q);
[PATCH] libata: implement ata_eh_wait() Implement ata_eh_wait(). On return from this function, it's guaranteed that the EH which was pending or in progress when the function was called is complete - including the tailing part of SCSI EH. This will be used by hotplug and others to synchronize with EH. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:27 -06:00
init_waitqueue_head(&ap->eh_wait_q);
libata: Implement disk shock protection support On user request (through sysfs), the IDLE IMMEDIATE command with UNLOAD FEATURE as specified in ATA-7 is issued to the device and processing of the request queue is stopped thereafter until the specified timeout expires or user space asks to resume normal operation. This is supposed to prevent the heads of a hard drive from accidentally crashing onto the platter when a heavy shock is anticipated (like a falling laptop expected to hit the floor). In fact, the whole port stops processing commands until the timeout has expired in order to avoid any resets due to failed commands on another device. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-21 03:54:08 -06:00
init_completion(&ap->park_req_pending);
libata: implement EH fast drain In most cases, when EH is scheduled, all in-flight commands are aborted causing EH to kick in immediately. However, in some cases (especially with PMP), it's unclear which commands are affected by the error condition and although aborting all in-flight commands work, it isn't optimal and may cause unnecessary disruption. On the other hand, waiting for in-flight commands to drain themselves can take up to 30seconds. This patch implements EH fast drain to handle such situations. It gives in-flight commands some time to finish up but doesn't wait for too long. After EH is scheduled, fast drain timer is started and if no other completion occurs in ATA_EH_FASTDRAIN_INTERVAL all in-flight commands are aborted. If any completion occurred in the interval, the port is given another interval to finish up itself. Currently ATA_EH_FASTDRAIN_INTERVAL is 3 secs which should be enough for finishing up most commands. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:41 -06:00
init_timer_deferrable(&ap->fastdrain_timer);
ap->fastdrain_timer.function = ata_eh_fastdrain_timerfn;
ap->fastdrain_timer.data = (unsigned long)ap;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata: init ap->cbl to ATA_CBL_SATA early Init ap->cbl to ATA_CBL_SATA in ata_host_init(). This is necessary for soon-to-follow SCR handling function changes. LLDDs are free to change ap->cbl during probing. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:44 -06:00
ap->cbl = ATA_CBL_NONE;
libata-link: add PMP links Add link->pmp, ap->nr_pmp_links, ap->pmp_link[], and implement/update link helpers. printk helpers are updated such that port and link are identifed as 'ataP:' if no PMP is attached, while device is identified as 'ataP.DD:'. If PMP is attached, they become 'ataP:', 'ataP.LL:' and 'ataP.LL' - ie. link and device are identified their PMP number. If PPM is attached (ap->nr_pmp_links != 0), ata_for_each_link() iterates over PMP links, while __ata_for_each_link() iterates over the host link + PMP links. If PMP is not attached (ap->nr_pmp_links == 0), both iterate over only the host link. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
ata_link_init(ap, &ap->link, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#ifdef ATA_IRQ_TRAP
ap->stats.unhandled_irq = 1;
ap->stats.idle_irq = 1;
#endif
return ap;
}
libata: update libata core layer to use devres Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:28 -07:00
static void ata_host_release(struct device *gendev, void *res)
{
struct ata_host *host = dev_get_drvdata(gendev);
int i;
libata: fix ata_host_release() free order host->ops->host_stop() might access ports. Free ports after host_stop. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 03:36:12 -07:00
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
libata: allocate ap separately from shost Don't embed ap inside shost. Allocate it separately and point it back from shosts's hostdata. This makes port allocation more flexible and allows regular ATA and SAS share host alloc/init paths. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
if (!ap)
continue;
if (ap->scsi_host)
libata: fix ata_host_release() free order host->ops->host_stop() might access ports. Free ports after host_stop. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 03:36:12 -07:00
scsi_host_put(ap->scsi_host);
libata-pmp: hook PMP support and enable it Hook PMP support into libata and enable it. Connect SCR and probing functions, and update ata_dev_classify() to detect PMP. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:19:54 -06:00
kfree(ap->pmp_link);
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
kfree(ap->slave_link);
libata: allocate ap separately from shost Don't embed ap inside shost. Allocate it separately and point it back from shosts's hostdata. This makes port allocation more flexible and allows regular ATA and SAS share host alloc/init paths. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
kfree(ap);
libata: fix ata_host_release() free order host->ops->host_stop() might access ports. Free ports after host_stop. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-09 03:36:12 -07:00
host->ports[i] = NULL;
}
libata: clear drvdata in ata_host_release(), take#2 Clearing drvdata in ->remove_one causes NULL pointer deference. Clear drvdata only in ata_host_release() after all resources are freed. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-27 06:33:21 -07:00
dev_set_drvdata(gendev, NULL);
libata: update libata core layer to use devres Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:28 -07:00
}
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
/**
* ata_host_alloc - allocate and init basic ATA host resources
* @dev: generic device this host is associated with
* @max_ports: maximum number of ATA ports associated with this host
*
* Allocate and initialize basic ATA host resources. LLD calls
* this function to allocate a host, initializes it fully and
* attaches it using ata_host_register().
*
* @max_ports ports are allocated and host->n_ports is
* initialized to @max_ports. The caller is allowed to decrease
* host->n_ports before calling ata_host_register(). The unused
* ports will be automatically freed on registration.
*
* RETURNS:
* Allocate ATA host on success, NULL on failure.
*
* LOCKING:
* Inherited from calling layer (may sleep).
*/
struct ata_host *ata_host_alloc(struct device *dev, int max_ports)
{
struct ata_host *host;
size_t sz;
int i;
DPRINTK("ENTER\n");
if (!devres_open_group(dev, NULL, GFP_KERNEL))
return NULL;
/* alloc a container for our list of ATA ports (buses) */
sz = sizeof(struct ata_host) + (max_ports + 1) * sizeof(void *);
/* alloc a container for our list of ATA ports (buses) */
host = devres_alloc(ata_host_release, sz, GFP_KERNEL);
if (!host)
goto err_out;
devres_add(dev, host);
dev_set_drvdata(dev, host);
spin_lock_init(&host->lock);
host->dev = dev;
host->n_ports = max_ports;
/* allocate ports bound to this host */
for (i = 0; i < max_ports; i++) {
struct ata_port *ap;
ap = ata_port_alloc(host);
if (!ap)
goto err_out;
ap->port_no = i;
host->ports[i] = ap;
}
devres_remove_group(dev, NULL);
return host;
err_out:
devres_release_group(dev, NULL);
return NULL;
}
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
/**
* ata_host_alloc_pinfo - alloc host and init with port_info array
* @dev: generic device this host is associated with
* @ppi: array of ATA port_info to initialize host with
* @n_ports: number of ATA ports attached to this host
*
* Allocate ATA host and initialize with info from @ppi. If NULL
* terminated, @ppi may contain fewer entries than @n_ports. The
* last entry will be used for the remaining ports.
*
* RETURNS:
* Allocate ATA host on success, NULL on failure.
*
* LOCKING:
* Inherited from calling layer (may sleep).
*/
struct ata_host *ata_host_alloc_pinfo(struct device *dev,
const struct ata_port_info * const * ppi,
int n_ports)
{
const struct ata_port_info *pi;
struct ata_host *host;
int i, j;
host = ata_host_alloc(dev, n_ports);
if (!host)
return NULL;
for (i = 0, j = 0, pi = NULL; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
if (ppi[j])
pi = ppi[j++];
ap->pio_mask = pi->pio_mask;
ap->mwdma_mask = pi->mwdma_mask;
ap->udma_mask = pi->udma_mask;
ap->flags |= pi->flags;
libata-link: make two port flags HRST_TO_RESUME and SKIP_D2H_BSY link flags HRST_TO_RESUME and SKIP_D2H_BSY are link attributes. Move them to ata_link->flags. This will allow host and PMP links to have different attributes. ata_port_info->link_flags is added and used by LLDs to specify these flags during initialization. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
ap->link.flags |= pi->link_flags;
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
ap->ops = pi->port_ops;
if (!host->ops && (pi->port_ops != &ata_dummy_port_ops))
host->ops = pi->port_ops;
}
return host;
}
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
/**
* ata_slave_link_init - initialize slave link
* @ap: port to initialize slave link for
*
* Create and initialize slave link for @ap. This enables slave
* link handling on the port.
*
* In libata, a port contains links and a link contains devices.
* There is single host link but if a PMP is attached to it,
* there can be multiple fan-out links. On SATA, there's usually
* a single device connected to a link but PATA and SATA
* controllers emulating TF based interface can have two - master
* and slave.
*
* However, there are a few controllers which don't fit into this
* abstraction too well - SATA controllers which emulate TF
* interface with both master and slave devices but also have
* separate SCR register sets for each device. These controllers
* need separate links for physical link handling
* (e.g. onlineness, link speed) but should be treated like a
* traditional M/S controller for everything else (e.g. command
* issue, softreset).
*
* slave_link is libata's way of handling this class of
* controllers without impacting core layer too much. For
* anything other than physical link handling, the default host
* link is used for both master and slave. For physical link
* handling, separate @ap->slave_link is used. All dirty details
* are implemented inside libata core layer. From LLD's POV, the
* only difference is that prereset, hardreset and postreset are
* called once more for the slave link, so the reset sequence
* looks like the following.
*
* prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) ->
* softreset(M) -> postreset(M) -> postreset(S)
*
* Note that softreset is called only for the master. Softreset
* resets both M/S by definition, so SRST on master should handle
* both (the standard method will work just fine).
*
* LOCKING:
* Should be called before host is registered.
*
* RETURNS:
* 0 on success, -errno on failure.
*/
int ata_slave_link_init(struct ata_port *ap)
{
struct ata_link *link;
WARN_ON(ap->slave_link);
WARN_ON(ap->flags & ATA_FLAG_PMP);
link = kzalloc(sizeof(*link), GFP_KERNEL);
if (!link)
return -ENOMEM;
ata_link_init(ap, link, 1);
ap->slave_link = link;
return 0;
}
libata: port and host should be stopped before hardware resources are released Port / host stop calls used to be made from ata_host_release() which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware. Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist. This problem has been spotted by Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-07 21:09:00 -07:00
static void ata_host_stop(struct device *gendev, void *res)
{
struct ata_host *host = dev_get_drvdata(gendev);
int i;
WARN_ON(!(host->flags & ATA_HOST_STARTED));
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
if (ap->ops->port_stop)
ap->ops->port_stop(ap);
}
if (host->ops->host_stop)
host->ops->host_stop(host);
}
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
/**
* ata_finalize_port_ops - finalize ata_port_operations
* @ops: ata_port_operations to finalize
*
* An ata_port_operations can inherit from another ops and that
* ops can again inherit from another. This can go on as many
* times as necessary as long as there is no loop in the
* inheritance chain.
*
* Ops tables are finalized when the host is started. NULL or
* unspecified entries are inherited from the closet ancestor
* which has the method and the entry is populated with it.
* After finalization, the ops table directly points to all the
* methods and ->inherits is no longer necessary and cleared.
*
* Using ATA_OP_NULL, inheriting ops can force a method to NULL.
*
* LOCKING:
* None.
*/
static void ata_finalize_port_ops(struct ata_port_operations *ops)
{
ata: Convert to static DEFINE_SPINLOCK(lock) Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock). Signed-off-by: Pradeep Singh <rautelap@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-29 11:58:14 -06:00
static DEFINE_SPINLOCK(lock);
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
const struct ata_port_operations *cur;
void **begin = (void **)ops;
void **end = (void **)&ops->inherits;
void **pp;
if (!ops || !ops->inherits)
return;
spin_lock(&lock);
for (cur = ops->inherits; cur; cur = cur->inherits) {
void **inherit = (void **)cur;
for (pp = begin; pp < end; pp++, inherit++)
if (!*pp)
*pp = *inherit;
}
for (pp = begin; pp < end; pp++)
if (IS_ERR(*pp))
*pp = NULL;
ops->inherits = NULL;
spin_unlock(&lock);
}
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
/**
* ata_host_start - start and freeze ports of an ATA host
* @host: ATA host to start ports for
*
* Start and then freeze ports of @host. Started status is
* recorded in host->flags, so this function can be called
* multiple times. Ports are guaranteed to get started only
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
* once. If host->ops isn't initialized yet, its set to the
* first non-dummy port ops.
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
*
* LOCKING:
* Inherited from calling layer (may sleep).
*
* RETURNS:
* 0 if all ports are started successfully, -errno otherwise.
*/
int ata_host_start(struct ata_host *host)
{
libata: port and host should be stopped before hardware resources are released Port / host stop calls used to be made from ata_host_release() which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware. Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist. This problem has been spotted by Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-07 21:09:00 -07:00
int have_stop = 0;
void *start_dr = NULL;
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
int i, rc;
if (host->flags & ATA_HOST_STARTED)
return 0;
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
ata_finalize_port_ops(host->ops);
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
ata_finalize_port_ops(ap->ops);
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
if (!host->ops && !ata_port_is_dummy(ap))
host->ops = ap->ops;
libata: port and host should be stopped before hardware resources are released Port / host stop calls used to be made from ata_host_release() which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware. Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist. This problem has been spotted by Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-07 21:09:00 -07:00
if (ap->ops->port_stop)
have_stop = 1;
}
if (host->ops->host_stop)
have_stop = 1;
if (have_stop) {
start_dr = devres_alloc(ata_host_stop, 0, GFP_KERNEL);
if (!start_dr)
return -ENOMEM;
}
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
if (ap->ops->port_start) {
rc = ap->ops->port_start(ap);
if (rc) {
libata: Fix early use of port printk. (Was Re: ata4294967295: failed to start port (errno=-19)) On Fri, 30 Nov 2007 14:34:11 +0200 (EET) Meelis Roos <mroos@linux.ee> wrote: > > Can you stick a stack trace in at that point ? That would help diagnose > > it a great deal quicker. > > Finally done - found out hard way that BUG() is too bad and > dump_st5ack() suits me better. Thanks. This should fix the real cause, and also allow for port start to fail politely with -ENODEV. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-30 08:23:16 -07:00
if (rc != -ENODEV)
[libata] core checkpatch fix Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-10 15:33:09 -07:00
dev_printk(KERN_ERR, host->dev,
"failed to start port %d "
"(errno=%d)\n", i, rc);
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
goto err_out;
}
}
ata_eh_freeze_port(ap);
}
libata: port and host should be stopped before hardware resources are released Port / host stop calls used to be made from ata_host_release() which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware. Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist. This problem has been spotted by Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-07 21:09:00 -07:00
if (start_dr)
devres_add(host->dev, start_dr);
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
host->flags |= ATA_HOST_STARTED;
return 0;
err_out:
while (--i >= 0) {
struct ata_port *ap = host->ports[i];
if (ap->ops->port_stop)
ap->ops->port_stop(ap);
}
libata: port and host should be stopped before hardware resources are released Port / host stop calls used to be made from ata_host_release() which is called after all hardware resources acquired after host allocation are released. This is wrong as port and host stop routines often access the hardware. Add separate devres for port / host stop which is invoked right after IRQ is released but with all other hardware resources intact. The devres is added iff ->host_stop and/or ->port_stop exist. This problem has been spotted by Mark Lord. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Mark Lord <liml@rtr.ca> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-07 21:09:00 -07:00
devres_free(start_dr);
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
return rc;
}
[PATCH] libata: Add ata_host_set_init Add ata_host_set_init in preparation for SAS attached SATA. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-07 13:27:10 -06:00
/**
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
* ata_sas_host_init - Initialize a host struct
* @host: host to initialize
* @dev: device host is attached to
* @flags: host flags
* @ops: port_ops
[PATCH] libata: Add ata_host_set_init Add ata_host_set_init in preparation for SAS attached SATA. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-07 13:27:10 -06:00
*
* LOCKING:
* PCI/etc. bus probe sem.
*
*/
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
/* KILLME - the only user left is ipr */
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
void ata_host_init(struct ata_host *host, struct device *dev,
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
unsigned long flags, struct ata_port_operations *ops)
[PATCH] libata: Add ata_host_set_init Add ata_host_set_init in preparation for SAS attached SATA. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-07 13:27:10 -06:00
{
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
spin_lock_init(&host->lock);
host->dev = dev;
host->flags = flags;
host->ops = ops;
[PATCH] libata: Add ata_host_set_init Add ata_host_set_init in preparation for SAS attached SATA. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-07 13:27:10 -06:00
}
fastboot: make the libata port scan asynchronous This patch makes the libata port scanning asynchronous (per device). There is a synchronization point before doing the actual disk scan so that device ordering is not affected. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-04 06:32:28 -07:00
static void async_port_probe(void *data, async_cookie_t cookie)
{
int rc;
struct ata_port *ap = data;
libata: Add a per-host flag to opt-in into parallel port probes This patch adds a per host flag that allows drivers to opt in into having its busses scanned in parallel. Drivers that do not set this flag get their ports scanned in the "original" sequence. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 16:54:07 -07:00
/*
* If we're not allowed to scan this host in parallel,
* we need to wait until all previous scans have completed
* before going further.
libata: only ports >= 0 need to synchronize In a discussio with Jeff Garzik, he mentioned that the serialization for the libata port probes only needs to be within the domain of a host. This means that for the first port of each host (with ID 0), we don't need to wait, so we can relax our serialization a little. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 11:18:44 -07:00
* Jeff Garzik says this is only within a controller, so we
* don't need to wait for port 0, only for later ports.
libata: Add a per-host flag to opt-in into parallel port probes This patch adds a per host flag that allows drivers to opt in into having its busses scanned in parallel. Drivers that do not set this flag get their ports scanned in the "original" sequence. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 16:54:07 -07:00
*/
libata: only ports >= 0 need to synchronize In a discussio with Jeff Garzik, he mentioned that the serialization for the libata port probes only needs to be within the domain of a host. This means that for the first port of each host (with ID 0), we don't need to wait, so we can relax our serialization a little. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 11:18:44 -07:00
if (!(ap->host->flags & ATA_HOST_PARALLEL_SCAN) && ap->port_no != 0)
libata: Add a per-host flag to opt-in into parallel port probes This patch adds a per host flag that allows drivers to opt in into having its busses scanned in parallel. Drivers that do not set this flag get their ports scanned in the "original" sequence. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-09 16:54:07 -07:00
async_synchronize_cookie(cookie);
fastboot: make the libata port scan asynchronous This patch makes the libata port scanning asynchronous (per device). There is a synchronization point before doing the actual disk scan so that device ordering is not affected. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-04 06:32:28 -07:00
/* probe */
if (ap->ops->error_handler) {
struct ata_eh_info *ehi = &ap->link.eh_info;
unsigned long flags;
ata_port_probe(ap);
/* kick EH for boot probing */
spin_lock_irqsave(ap->lock, flags);
ehi->probe_mask |= ATA_ALL_DEVICES;
ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
ap->pflags |= ATA_PFLAG_LOADING;
ata_port_schedule_eh(ap);
spin_unlock_irqrestore(ap->lock, flags);
/* wait for EH to finish */
ata_port_wait_eh(ap);
} else {
DPRINTK("ata%u: bus probe begin\n", ap->print_id);
rc = ata_bus_probe(ap);
DPRINTK("ata%u: bus probe end\n", ap->print_id);
if (rc) {
/* FIXME: do something useful here?
* Current libata behavior will
* tear down everything when
* the module is removed
* or the h/w is unplugged.
*/
}
}
fastboot: Make libata initialization even more async As suggested by Linus: Don't do the libata init in 2 separate steps with a global sync inbetween, but do it as one async step, with a local sync before registering the device. This cuts the boottime on my machine with 2 sata controllers down significantly, and it seems to work. Would be nice if the libata folks take a good look at this patch though.. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-05 16:07:07 -07:00
/* in order to keep device order, we need to synchronize at this point */
async_synchronize_cookie(cookie);
ata_scsi_scan_host(ap, 1);
fastboot: make the libata port scan asynchronous This patch makes the libata port scanning asynchronous (per device). There is a synchronization point before doing the actual disk scan so that device ordering is not affected. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-04 06:32:28 -07:00
}
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
/**
* ata_host_register - register initialized ATA host
* @host: ATA host to register
* @sht: template for SCSI host
*
* Register initialized ATA host. @host is allocated using
* ata_host_alloc() and fully initialized by LLD. This function
* starts ports, registers @host with ATA and SCSI layers and
* probe registered devices.
*
* LOCKING:
* Inherited from calling layer (may sleep).
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
{
int i, rc;
/* host must have been started */
if (!(host->flags & ATA_HOST_STARTED)) {
dev_printk(KERN_ERR, host->dev,
"BUG: trying to register unstarted host\n");
WARN_ON(1);
return -EINVAL;
}
/* Blow away unused ports. This happens when LLD can't
* determine the exact number of ports to allocate at
* allocation time.
*/
for (i = host->n_ports; host->ports[i]; i++)
kfree(host->ports[i]);
/* give ports names and add SCSI hosts */
for (i = 0; i < host->n_ports; i++)
host->ports[i]->print_id = ata_print_id++;
rc = ata_scsi_add_hosts(host, sht);
if (rc)
return rc;
libata-acpi: implement ata_acpi_associate() * Add acpi_handle to ata_host and ata_port. Rename ata_device->obj_handle to ->acpi_handle and move it above such that it doesn't get cleared on reconfiguration. * Replace ACPI node association which ata_acpi_associate() which is called once during host initialization. Unlike the previous implementation, ata_acpi_associate() uses ATA_FLAG_ACPI_SATA to choose between IDE or SATA ACPI hierarchy and uses simple child look up instead of recursive walk to match the nodes. This is way safer and simpler. Please read the following message for more info. http://article.gmane.org/gmane.linux.ide/17554 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-14 12:28:16 -06:00
/* associate with ACPI nodes */
ata_acpi_associate(host);
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
/* set cable, sata_spd_limit and report */
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
unsigned long xfer_mask;
/* set SATA cable type if still unset */
if (ap->cbl == ATA_CBL_NONE && (ap->flags & ATA_FLAG_SATA))
ap->cbl = ATA_CBL_SATA;
/* init sata_spd_limit to the current value */
libata-link: separate out link initialization functions Separate out link initialization into ata_link_init() and ata_link_init_sata_spd(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
sata_link_init_spd(&ap->link);
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
if (ap->slave_link)
sata_link_init_spd(ap->slave_link);
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
libata: implement and use ata_port_desc() to report port configuration Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-17 22:14:55 -06:00
/* print per-port info to dmesg */
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
xfer_mask = ata_pack_xfermask(ap->pio_mask, ap->mwdma_mask,
ap->udma_mask);
libata: clear ehi description after initial host report ehi description field is used to carry LLD specific controller description. Sometimes, it's used without clearing before and LLD description gets printed with exception information one more time. Clear after printing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-08 23:57:25 -06:00
if (!ata_port_is_dummy(ap)) {
libata: implement and use ata_port_desc() to report port configuration Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-17 22:14:55 -06:00
ata_port_printk(ap, KERN_INFO,
"%cATA max %s %s\n",
libata: replace ap->cbl tests with ATA_FLAG_SATA tests ap->cbl == ATA_CBL_SATA indicates SATA cable while ap->flags & ATA_FLAG_SATA indicates SATA host port. Till now they always gave the same result but SATA/PATA bridge handling will change that. Switch to ATA_FLAG_SATA test if we're testing for host port type. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-21 10:33:47 -06:00
(ap->flags & ATA_FLAG_SATA) ? 'S' : 'P',
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
ata_mode_string(xfer_mask),
libata: implement and use ata_port_desc() to report port configuration Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-17 22:14:55 -06:00
ap->link.eh_info.desc);
libata: clear ehi description after initial host report ehi description field is used to carry LLD specific controller description. Sometimes, it's used without clearing before and LLD description gets printed with exception information one more time. Clear after printing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-08 23:57:25 -06:00
ata_ehi_clear_desc(&ap->link.eh_info);
} else
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
ata_port_printk(ap, KERN_INFO, "DUMMY\n");
}
ata: fix obviously wrong comment Also remove the now-useless debug printouts which are supposed to tell us when the scan starts and ends. Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-04-08 10:19:39 -06:00
/* perform each probe asynchronously */
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
fastboot: make the libata port scan asynchronous This patch makes the libata port scanning asynchronous (per device). There is a synchronization point before doing the actual disk scan so that device ordering is not affected. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
2009-01-04 06:32:28 -07:00
async_schedule(async_port_probe, ap);
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
}
return 0;
}
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
/**
* ata_host_activate - start host, request IRQ and register it
* @host: target ATA host
* @irq: IRQ to request
* @irq_handler: irq_handler used when requesting IRQ
* @irq_flags: irq_flags used when requesting IRQ
* @sht: scsi_host_template to use when registering the host
*
* After allocating an ATA host and initializing it, most libata
* LLDs perform three steps to activate the host - start host,
* request IRQ and register it. This helper takes necessasry
* arguments and performs the three steps in one go.
*
libata: Support PIO polling-only hosts. By default ata_host_activate() expects a valid IRQ in order to successfully register the host. This patch enables a special case for registering polling-only hosts that either don't have IRQs or have buggy IRQ generation (either in terms of handling or sensing), which otherwise work fine. Hosts that want to use polling mode can simply set ATA_FLAG_PIO_POLLING and pass in an invalid IRQ. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-07 19:14:56 -07:00
* An invalid IRQ skips the IRQ registration and expects the host to
* have set polling mode on the port. In this case, @irq_handler
* should be NULL.
*
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
* LOCKING:
* Inherited from calling layer (may sleep).
*
* RETURNS:
* 0 on success, -errno otherwise.
*/
int ata_host_activate(struct ata_host *host, int irq,
irq_handler_t irq_handler, unsigned long irq_flags,
struct scsi_host_template *sht)
{
libata: implement and use ata_port_desc() to report port configuration Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-17 22:14:55 -06:00
int i, rc;
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
rc = ata_host_start(host);
if (rc)
return rc;
libata: Support PIO polling-only hosts. By default ata_host_activate() expects a valid IRQ in order to successfully register the host. This patch enables a special case for registering polling-only hosts that either don't have IRQs or have buggy IRQ generation (either in terms of handling or sensing), which otherwise work fine. Hosts that want to use polling mode can simply set ATA_FLAG_PIO_POLLING and pass in an invalid IRQ. Signed-off-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-07 19:14:56 -07:00
/* Special case for polling mode */
if (!irq) {
WARN_ON(irq_handler);
return ata_host_register(host, sht);
}
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
rc = devm_request_irq(host->dev, irq, irq_handler, irq_flags,
dev_driver_string(host->dev), host);
if (rc)
return rc;
libata: implement and use ata_port_desc() to report port configuration Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-17 22:14:55 -06:00
for (i = 0; i < host->n_ports; i++)
ata_port_desc(host->ports[i], "irq %d", irq);
libata: fix assigned IRQ reporting host->irq and host->irq2 should be set before ata_host_register() for IRQ reporting to work. Move up host->irq assignment in ata_host_activate() and add it to ata_pci_init_one() native path and pata_cs5520. The port info printing in ata_host_register() doesn't fit all the different controllers. It should probably be moved out to LLDs with some helpers in the future. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-02 10:38:47 -06:00
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
rc = ata_host_register(host, sht);
/* if failed, just free the IRQ and leave ports alone */
if (rc)
devm_free_irq(host->dev, irq, host);
return rc;
}
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
/**
* ata_port_detach - Detach ATA port in prepration of device removal
* @ap: ATA port to be detached
*
* Detach all ATA devices and the associated SCSI devices of @ap;
* then, remove the associated SCSI host. @ap is guaranteed to
* be quiescent on return from this function.
*
* LOCKING:
* Kernel thread context (may sleep).
*/
libata-core.c: make 2 functions static strn_pattern_cmp() and ata_port_detach() can become static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-24 10:23:06 -06:00
static void ata_port_detach(struct ata_port *ap)
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
{
unsigned long flags;
if (!ap->ops->error_handler)
[PATCH] libata: fix ata_port_detach() for old EH ports ata_prot_detach() did nothing for old EH ports and thus SCSI hosts associated with those ports are left dangling after they are detached leaving stale devices and causing oops eventually. Make ata_port_detach() remove SCSI hosts for old EH ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-04 12:59:11 -06:00
goto skip_eh;
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
/* tell EH we're leaving & flush EH */
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_lock_irqsave(ap->lock, flags);
[PATCH] libata: add ap->pflags and move core dynamic flags to it ap->flags is way too clamped. Separate out core dynamic flags to ap->pflags. ATA_FLAG_DISABLED is a dynamic flag but left alone as it's referenced by a lot of LLDs and it's gonna be removed once all LLDs are converted to new EH. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-28 10:29:30 -06:00
ap->pflags |= ATA_PFLAG_UNLOADING;
libata: perform port detach in EH ata_port_detach() first made sure EH saw ATA_PFLAG_UNLOADING and then assumed EH context belongs to it and performed detach operation itself. However, UNLOADING doesn't disable all of EH and this could lead to problems including triggering WARN_ON()'s in EH path. This patch makes port detach behave more like other EH actions such that ata_port_detach() requests EH to detach and waits for completion. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:04:37 -07:00
ata_port_schedule_eh(ap);
[libata] Add host lock to struct ata_port Prepare for changes required to support SATA devices attached to SAS HBAs. For these devices we don't want to use host_set at all, since libata will not be the owner of struct scsi_host. Signed-off-by: Brian King <brking@us.ibm.com> (with slight merge modifications made by...) Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-22 21:46:10 -06:00
spin_unlock_irqrestore(ap->lock, flags);
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
libata: perform port detach in EH ata_port_detach() first made sure EH saw ATA_PFLAG_UNLOADING and then assumed EH context belongs to it and performed detach operation itself. However, UNLOADING doesn't disable all of EH and this could lead to problems including triggering WARN_ON()'s in EH path. This patch makes port detach behave more like other EH actions such that ata_port_detach() requests EH to detach and waits for completion. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:04:37 -07:00
/* wait till EH commits suicide */
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
ata_port_wait_eh(ap);
libata: perform port detach in EH ata_port_detach() first made sure EH saw ATA_PFLAG_UNLOADING and then assumed EH context belongs to it and performed detach operation itself. However, UNLOADING doesn't disable all of EH and this could lead to problems including triggering WARN_ON()'s in EH path. This patch makes port detach behave more like other EH actions such that ata_port_detach() requests EH to detach and waits for completion. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:04:37 -07:00
/* it better be dead now */
WARN_ON(!(ap->pflags & ATA_PFLAG_UNLOADED));
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
libata-core: convert to use cancel_rearming_delayed_work() We should not use cancel_work_sync(delayed_work->work). This works, but not good. We can use cancel_rearming_delayed_work(), this also simplifies the code. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-09 12:46:13 -06:00
cancel_rearming_delayed_work(&ap->hotplug_task);
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
[PATCH] libata: fix ata_port_detach() for old EH ports ata_prot_detach() did nothing for old EH ports and thus SCSI hosts associated with those ports are left dangling after they are detached leaving stale devices and causing oops eventually. Make ata_port_detach() remove SCSI hosts for old EH ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-04 12:59:11 -06:00
skip_eh:
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
/* remove the associated SCSI host */
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
scsi_remove_host(ap->scsi_host);
[PATCH] libata-hp: update unload-unplug Update unload unplug - driver unloading / PCI removal. This is done by ata_port_detach() which short-circuits EH, disables all devices and freezes the port. With this patch, EH and unloading/unplugging are properly synchronized. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:13 -06:00
}
libata: implement ata_host_detach() Implement ata_host_detach() which calls ata_port_detach() for each port in the host and export it. ata_port_detach() is now internal and thus un-exported. ata_host_detach() will be used as the 'deregister from libata layer' function after devres conversion. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:26 -07:00
/**
* ata_host_detach - Detach all ports of an ATA host
* @host: Host to detach
*
* Detach all ports of @host.
*
* LOCKING:
* Kernel thread context (may sleep).
*/
void ata_host_detach(struct ata_host *host)
{
int i;
for (i = 0; i < host->n_ports; i++)
ata_port_detach(host->ports[i]);
libata-acpi: add new hooks ata_acpi_dissociate() and ata_acpi_on_disable() Add two hooks - ata_acpi_dissociate() which is called during driver detach after the whole host is shutdown and ata_acpi_on_disable() which is called when a device is disabled. Signed-off-by: Tejun heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-14 23:05:01 -07:00
/* the host is dead now, dissociate ACPI */
ata_acpi_dissociate(host);
libata: implement ata_host_detach() Implement ata_host_detach() which calls ata_port_detach() for each port in the host and export it. ata_port_detach() is now internal and thus un-exported. ata_host_detach() will be used as the 'deregister from libata layer' function after devres conversion. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:26 -07:00
}
[libata] update several drivers to use pci_iomap()/pci_iounmap()
2005-08-30 03:42:52 -06:00
#ifdef CONFIG_PCI
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/**
* ata_pci_remove_one - PCI layer callback for device removal
* @pdev: PCI device that was removed
*
libata: remove unused functions Now that all LLDs are converted to use devres, default stop callbacks are unused. Remove them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:28 -07:00
* PCI layer indicates to libata via this hook that hot-unplug or
* module unload event has occurred. Detach all ports. Resource
* release is handled via devres.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
*
* LOCKING:
* Inherited from PCI layer (may sleep).
*/
libata: update libata core layer to use devres Update libata core layer to use devres. * ata_device_add() acquires all resources in managed mode. * ata_host is allocated as devres associated with ata_host_release. * Port attached status is handled as devres associated with ata_host_attach_release(). * Initialization failure and host removal is handedl by releasing devres group. * Except for ata_scsi_release() removal, LLD interface remains the same. Some functions use hacky is_managed test to support both managed and unmanaged devices. These will go away once all LLDs are updated to use devres. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:28 -07:00
void ata_pci_remove_one(struct pci_dev *pdev)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
[libata] struct pci_dev related cleanups * remove pointless pci_dev_to_dev() wrapper. Just directly reference the embedded struct device like everyone else does. * pata_cs5520: delete cs5520_remove_one(), it was a duplicate of ata_pci_remove_one() * linux/libata.h: don't bother including linux/pci.h, we don't need it. Simply declare 'struct pci_dev' and assume interested parties will include the header, as they should be doing anyway. * linux/libata.h: consolidate all CONFIG_PCI declarations into a single location in the header. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-11 15:12:35 -06:00
struct device *dev = &pdev->dev;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
struct ata_host *host = dev_get_drvdata(dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
libata: remove unused functions Now that all LLDs are converted to use devres, default stop callbacks are unused. Remove them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:28 -07:00
ata_host_detach(host);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
/* move to PCI subsystem */
libata: const-ification bombing run Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect.
2005-10-22 12:27:05 -06:00
int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
unsigned long tmp = 0;
switch (bits->width) {
case 1: {
u8 tmp8 = 0;
pci_read_config_byte(pdev, bits->reg, &tmp8);
tmp = tmp8;
break;
}
case 2: {
u16 tmp16 = 0;
pci_read_config_word(pdev, bits->reg, &tmp16);
tmp = tmp16;
break;
}
case 4: {
u32 tmp32 = 0;
pci_read_config_dword(pdev, bits->reg, &tmp32);
tmp = tmp32;
break;
}
default:
return -EINVAL;
}
tmp &= bits->mask;
return (tmp == bits->val) ? 1 : 0;
}
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
libata: add CONFIG_PM to libata core layer Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 01:32:47 -07:00
#ifdef CONFIG_PM
[PATCH] libata: cosmetic changes to PM functions Unify pm_message_t argument to the new-style @mesg. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 01:58:33 -06:00
void ata_pci_device_do_suspend(struct pci_dev *pdev, pm_message_t mesg)
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
{
pci_save_state(pdev);
libata: disable pdev on all suspend events libata used disable pdev only on PM_EVENT_SUSPEND while re-enable pdev unconditionally. This was okay before ref-counted pdev enable update but it now makes the pdev pinned after swsusp cycle (enabled twice but disabled only once) and devres sanity check whines about it. Fix it by unconditionally disabling pdev on all suspend events. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20 02:14:48 -07:00
pci_disable_device(pdev);
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
PM: Introduce PM_EVENT_HIBERNATE callback state During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-23 11:13:25 -07:00
if (mesg.event & PM_EVENT_SLEEP)
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
pci_set_power_state(pdev, PCI_D3hot);
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
}
libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 03:39:50 -07:00
int ata_pci_device_do_resume(struct pci_dev *pdev)
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
{
libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 03:39:50 -07:00
int rc;
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 03:39:50 -07:00
libata: remove unused functions Now that all LLDs are converted to use devres, default stop callbacks are unused. Remove them. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:28 -07:00
rc = pcim_enable_device(pdev);
libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 03:39:50 -07:00
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"failed to enable device after resume (%d)\n", rc);
return rc;
}
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
pci_set_master(pdev);
libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 03:39:50 -07:00
return 0;
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
}
[PATCH] libata: cosmetic changes to PM functions Unify pm_message_t argument to the new-style @mesg. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 01:58:33 -06:00
int ata_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
{
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
struct ata_host *host = dev_get_drvdata(&pdev->dev);
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
int rc = 0;
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
rc = ata_host_suspend(host, mesg);
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
if (rc)
return rc;
[PATCH] libata: cosmetic changes to PM functions Unify pm_message_t argument to the new-style @mesg. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-26 01:58:33 -06:00
ata_pci_device_do_suspend(pdev, mesg);
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
return 0;
}
int ata_pci_device_resume(struct pci_dev *pdev)
{
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
struct ata_host *host = dev_get_drvdata(&pdev->dev);
libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 03:39:50 -07:00
int rc;
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
libata: handle pci_enable_device() failure while resuming Handle pci_enable_device() failure while resuming. This patch kills the "ignoring return value of 'pci_enable_device'" warning message and propagates __must_check through ata_pci_device_do_resume(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-26 03:39:50 -07:00
rc = ata_pci_device_do_resume(pdev);
if (rc == 0)
ata_host_resume(host);
return rc;
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
}
libata: add CONFIG_PM to libata core layer Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 01:32:47 -07:00
#endif /* CONFIG_PM */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#endif /* CONFIG_PCI */
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
static int __init ata_parse_force_one(char **cur,
struct ata_force_ent *force_ent,
const char **reason)
{
/* FIXME: Currently, there's no way to tag init const data and
* using __initdata causes build failure on some versions of
* gcc. Once __initdataconst is implemented, add const to the
* following structure.
*/
static struct ata_force_param force_tbl[] __initdata = {
{ "40c", .cbl = ATA_CBL_PATA40 },
{ "80c", .cbl = ATA_CBL_PATA80 },
{ "short40c", .cbl = ATA_CBL_PATA40_SHORT },
{ "unk", .cbl = ATA_CBL_PATA_UNK },
{ "ign", .cbl = ATA_CBL_PATA_IGN },
{ "sata", .cbl = ATA_CBL_SATA },
{ "1.5Gbps", .spd_limit = 1 },
{ "3.0Gbps", .spd_limit = 2 },
{ "noncq", .horkage_on = ATA_HORKAGE_NONCQ },
{ "ncq", .horkage_off = ATA_HORKAGE_NONCQ },
{ "pio0", .xfer_mask = 1 << (ATA_SHIFT_PIO + 0) },
{ "pio1", .xfer_mask = 1 << (ATA_SHIFT_PIO + 1) },
{ "pio2", .xfer_mask = 1 << (ATA_SHIFT_PIO + 2) },
{ "pio3", .xfer_mask = 1 << (ATA_SHIFT_PIO + 3) },
{ "pio4", .xfer_mask = 1 << (ATA_SHIFT_PIO + 4) },
{ "pio5", .xfer_mask = 1 << (ATA_SHIFT_PIO + 5) },
{ "pio6", .xfer_mask = 1 << (ATA_SHIFT_PIO + 6) },
{ "mwdma0", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 0) },
{ "mwdma1", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 1) },
{ "mwdma2", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 2) },
{ "mwdma3", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 3) },
{ "mwdma4", .xfer_mask = 1 << (ATA_SHIFT_MWDMA + 4) },
{ "udma0", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
{ "udma16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
{ "udma/16", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 0) },
{ "udma1", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
{ "udma25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
{ "udma/25", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 1) },
{ "udma2", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
{ "udma33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
{ "udma/33", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 2) },
{ "udma3", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
{ "udma44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
{ "udma/44", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 3) },
{ "udma4", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
{ "udma66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
{ "udma/66", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 4) },
{ "udma5", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
{ "udma100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
{ "udma/100", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 5) },
{ "udma6", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma/133", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 6) },
{ "udma7", .xfer_mask = 1 << (ATA_SHIFT_UDMA + 7) },
libata: implement no[hs]rst force params Implement force params nohrst, nosrst and norst. This is to work around reset related problems and ease debugging. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-08-13 05:19:09 -06:00
{ "nohrst", .lflags = ATA_LFLAG_NO_HRST },
{ "nosrst", .lflags = ATA_LFLAG_NO_SRST },
{ "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
};
char *start = *cur, *p = *cur;
char *id, *val, *endp;
const struct ata_force_param *match_fp = NULL;
int nr_matches = 0, i;
/* find where this param ends and update *cur */
while (*p != '\0' && *p != ',')
p++;
if (*p == '\0')
*cur = p;
else
*cur = p + 1;
*p = '\0';
/* parse */
p = strchr(start, ':');
if (!p) {
val = strstrip(start);
goto parse_val;
}
*p = '\0';
id = strstrip(start);
val = strstrip(p + 1);
/* parse id */
p = strchr(id, '.');
if (p) {
*p++ = '\0';
force_ent->device = simple_strtoul(p, &endp, 10);
if (p == endp || *endp != '\0') {
*reason = "invalid device";
return -EINVAL;
}
}
force_ent->port = simple_strtoul(id, &endp, 10);
if (p == endp || *endp != '\0') {
*reason = "invalid port/link";
return -EINVAL;
}
parse_val:
/* parse val, allow shortcuts so that both 1.5 and 1.5Gbps work */
for (i = 0; i < ARRAY_SIZE(force_tbl); i++) {
const struct ata_force_param *fp = &force_tbl[i];
if (strncasecmp(val, fp->name, strlen(val)))
continue;
nr_matches++;
match_fp = fp;
if (strcasecmp(val, fp->name) == 0) {
nr_matches = 1;
break;
}
}
if (!nr_matches) {
*reason = "unknown value";
return -EINVAL;
}
if (nr_matches > 1) {
*reason = "ambigious value";
return -EINVAL;
}
force_ent->param = *match_fp;
return 0;
}
static void __init ata_parse_force_param(void)
{
int idx = 0, size = 1;
int last_port = -1, last_device = -1;
char *p, *cur, *next;
/* calculate maximum number of params and allocate force_tbl */
for (p = ata_force_param_buf; *p; p++)
if (*p == ',')
size++;
ata_force_tbl = kzalloc(sizeof(ata_force_tbl[0]) * size, GFP_KERNEL);
if (!ata_force_tbl) {
printk(KERN_WARNING "ata: failed to extend force table, "
"libata.force ignored\n");
return;
}
/* parse and populate the table */
for (cur = ata_force_param_buf; *cur != '\0'; cur = next) {
const char *reason = "";
struct ata_force_ent te = { .port = -1, .device = -1 };
next = cur;
if (ata_parse_force_one(&next, &te, &reason)) {
printk(KERN_WARNING "ata: failed to parse force "
"parameter \"%s\" (%s)\n",
cur, reason);
continue;
}
if (te.port == -1) {
te.port = last_port;
te.device = last_device;
}
ata_force_tbl[idx++] = te;
last_port = te.port;
last_device = te.device;
}
ata_force_tbl_size = idx;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
static int __init ata_init(void)
{
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
ata_parse_force_param();
libata: add comment documenting PIO latency issues on UP Based on: http://lkml.indiana.edu/hypermail/linux/kernel/0908.2/01420.html Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-11-26 09:11:16 -07:00
/*
* FIXME: In UP case, there is only one workqueue thread and if you
* have more than one PIO device, latency is bloody awful, with
* occasional multi-second "hiccups" as one PIO device waits for
* another. It's an ugly wart that users DO occasionally complain
* about; luckily most users have at most one PIO polled device.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
ata_wq = create_workqueue("ata");
if (!ata_wq)
libata-core: make sure that ata_force_tbl is freed in case of an error Fix a potential memory leak when ata_init() encounters an error. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 13:32:39 -06:00
goto free_force_tbl;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
[PATCH] libata-hp-prep: add ata_aux_wq It's best to run ATA hotplug from EH but attaching SCSI devices needs working EH. ata_aux_wq is used to give SCSI hotplug operations a separate context. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:42 -06:00
ata_aux_wq = create_singlethread_workqueue("ata_aux");
libata-core: make sure that ata_force_tbl is freed in case of an error Fix a potential memory leak when ata_init() encounters an error. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 13:32:39 -06:00
if (!ata_aux_wq)
goto free_wq;
[PATCH] libata-hp-prep: add ata_aux_wq It's best to run ATA hotplug from EH but attaching SCSI devices needs working EH. ata_aux_wq is used to give SCSI hotplug operations a separate context. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:42 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
return 0;
libata-core: make sure that ata_force_tbl is freed in case of an error Fix a potential memory leak when ata_init() encounters an error. Signed-off-by: Elias Oltmanns <eo@nebensachen.de> Cc: Tejun Heo <tj@kernel.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30 13:32:39 -06:00
free_wq:
destroy_workqueue(ata_wq);
free_force_tbl:
kfree(ata_force_tbl);
return -ENOMEM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
static void __exit ata_exit(void)
{
libata: implement libata.force module parameter This patch implements libata.force module parameter which can selectively override ATA port, link and device configurations including cable type, SATA PHY SPD limit, transfer mode and NCQ. For example, you can say "use 1.5Gbps for all fan-out ports attached to the second port but allow 3.0Gbps for the PMP device itself, oh, the device attached to the third fan-out port chokes on NCQ and shouldn't go over UDMA4" by the following. libata.force=2:1.5g,2.15:3.0g,2.03:noncq,udma4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-12 17:15:09 -07:00
kfree(ata_force_tbl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
destroy_workqueue(ata_wq);
[PATCH] libata-hp-prep: add ata_aux_wq It's best to run ATA hotplug from EH but attaching SCSI devices needs working EH. ata_aux_wq is used to give SCSI hotplug operations a separate context. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:27:42 -06:00
destroy_workqueue(ata_aux_wq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
[PATCH] libata: Convert from module_init to subsys_initcall When building a monolithic kernel, the load order of drivers does not work for SAS libata users, resulting in a kernel oops. Convert libata to use subsys_initcall instead of module_init, which ensures that libata gets loaded before any LLDD. This is the same thing that scsi core does to solve the problem. The load order problem was observed on ipr SAS adapters and should exist for other SAS users as well. Signed-off-by: Brian King <brking@us.ibm.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13 15:32:36 -07:00
subsys_initcall(ata_init);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
module_exit(ata_exit);
libata: add ata_ratelimit(), use it in AHCI driver irq handler
2005-10-05 00:58:32 -06:00
static unsigned long ratelimit_time;
[PATCH] spin/rwlock init cleanups locking init cleanups: - convert " = SPIN_LOCK_UNLOCKED" to spin_lock_init() or DEFINE_SPINLOCK() - convert rwlocks in a similar manner this patch was generated automatically. Motivation: - cleanliness - lockdep needs control of lock initialization, which the open-coded variants do not give - it's also useful for -rt and for lock debugging in general Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 03:53:55 -06:00
static DEFINE_SPINLOCK(ata_ratelimit_lock);
libata: add ata_ratelimit(), use it in AHCI driver irq handler
2005-10-05 00:58:32 -06:00
int ata_ratelimit(void)
{
int rc;
unsigned long flags;
spin_lock_irqsave(&ata_ratelimit_lock, flags);
if (time_after(jiffies, ratelimit_time)) {
rc = 1;
ratelimit_time = jiffies + (HZ/5);
} else
rc = 0;
spin_unlock_irqrestore(&ata_ratelimit_lock, flags);
return rc;
}
[PATCH] libata: implement ata_wait_register() As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:22:29 -06:00
/**
* ata_wait_register - wait until register value changes
* @reg: IO-mapped register
* @mask: Mask to apply to read register value
* @val: Wait condition
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
* @interval: polling interval in milliseconds
* @timeout: timeout in milliseconds
[PATCH] libata: implement ata_wait_register() As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:22:29 -06:00
*
* Waiting for some bits of register to change is a common
* operation for ATA controllers. This function reads 32bit LE
* IO-mapped register @reg and tests for the following condition.
*
* (*@reg & mask) != val
*
* If the condition is met, it returns; otherwise, the process is
* repeated after @interval_msec until timeout.
*
* LOCKING:
* Kernel thread context (may sleep)
*
* RETURNS:
* The final register value.
*/
u32 ata_wait_register(void __iomem *reg, u32 mask, u32 val,
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
unsigned long interval, unsigned long timeout)
[PATCH] libata: implement ata_wait_register() As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:22:29 -06:00
{
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
unsigned long deadline;
[PATCH] libata: implement ata_wait_register() As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:22:29 -06:00
u32 tmp;
tmp = ioread32(reg);
/* Calculate timeout _after_ the first read to make sure
* preceding writes reach the controller before starting to
* eat away the timeout.
*/
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
deadline = ata_deadline(jiffies, timeout);
[PATCH] libata: implement ata_wait_register() As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:22:29 -06:00
libata: consistently use msecs for time durations libata has been using mix of jiffies and msecs for time druations. This is getting confusing. As writing sub HZ values in jiffies is PITA and msecs_to_jiffies() can't be used as initializer, unify unit for all time durations to msecs. So, durations are in msecs and deadlines are in jiffies. ata_deadline() is added to compute deadline from a start time and duration in msecs. While at it, drop now superflous _msec suffix from arguments and rename @timeout to @deadline if it represents a fixed point in time rather than duration. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-19 11:17:51 -06:00
while ((tmp & mask) == val && time_before(jiffies, deadline)) {
msleep(interval);
[PATCH] libata: implement ata_wait_register() As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:22:29 -06:00
tmp = ioread32(reg);
}
return tmp;
}
[PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:12 -06:00
/*
* Dummy port_ops
*/
libata: clean up dummy port_ops Now that SFF assumptions are removed from core layer, dummy port_ops can be slimmed down. Chop it down. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:21 -06:00
static unsigned int ata_dummy_qc_issue(struct ata_queued_cmd *qc)
[PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:12 -06:00
{
libata: clean up dummy port_ops Now that SFF assumptions are removed from core layer, dummy port_ops can be slimmed down. Chop it down. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:21 -06:00
return AC_ERR_SYSTEM;
[PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:12 -06:00
}
libata: clean up dummy port_ops Now that SFF assumptions are removed from core layer, dummy port_ops can be slimmed down. Chop it down. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:21 -06:00
static void ata_dummy_error_handler(struct ata_port *ap)
[PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:12 -06:00
{
libata: clean up dummy port_ops Now that SFF assumptions are removed from core layer, dummy port_ops can be slimmed down. Chop it down. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:21 -06:00
/* truly dummy */
[PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:12 -06:00
}
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
struct ata_port_operations ata_dummy_port_ops = {
[PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:12 -06:00
.qc_prep = ata_noop_qc_prep,
.qc_issue = ata_dummy_qc_issue,
libata: clean up dummy port_ops Now that SFF assumptions are removed from core layer, dummy port_ops can be slimmed down. Chop it down. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:21 -06:00
.error_handler = ata_dummy_error_handler,
[PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:12 -06:00
};
libata: add init helpers including ata_pci_prepare_native_host() These will be used to convert LLDs to new init model. * Add irq_handler field to port_info. In new init model, requesting IRQ is LLD's responsibility and libata doesn't need to know about irq_handler. Most LLDs can simply register their irq_handler but some need different irq_handler depending on specific chip. The added port_info->irq_handler field can be used by LLDs to select the matching IRQ handler in such cases. * Add ata_dummy_port_info. * Implement ata_pci_prepare_native_host(), a helper to alloc ATA host, acquire all resources and init the host in one go. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
const struct ata_port_info ata_dummy_port_info = {
.port_ops = &ata_dummy_port_ops,
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/*
* libata is essentially a library of internal helper functions for
* low-level ATA host controller drivers. As such, the API/ABI is
* likely to change as new drivers are added and updated.
* Do not depend on ABI/API stability.
*/
[PATCH] libata: clean up debounce parameters and improve parameter selection The names of predefined debounce timing parameters didn't exactly match their usages. Rename to more generic names and implement param selection helper sata_ehc_deb_timing() which uses EHI_HOTPLUGGED to select params. Combined with the previous EHI_RESUME_LINK differentiation, this makes parameter selection accurate. e.g. user scan resumes link but normal deb param is used instead of hotplug param. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:26 -06:00
EXPORT_SYMBOL_GPL(sata_deb_timing_normal);
EXPORT_SYMBOL_GPL(sata_deb_timing_hotplug);
EXPORT_SYMBOL_GPL(sata_deb_timing_long);
libata: implement and use ops inheritance libata lets low level drivers build ata_port_operations table and register it with libata core layer. This allows low level drivers high level of flexibility but also burdens them with lots of boilerplate entries. This becomes worse for drivers which support related similar controllers which differ slightly. They share most of the operations except for a few. However, the driver still needs to list all operations for each variant. This results in large number of duplicate entries, which is not only inefficient but also error-prone as it becomes very difficult to tell what the actual differences are. This duplicate boilerplates all over the low level drivers also make updating the core layer exteremely difficult and error-prone. When compounded with multi-branched development model, it ends up accumulating inconsistencies over time. Some of those inconsistencies cause immediate problems and fixed. Others just remain there dormant making maintenance increasingly difficult. To rectify the problem, this patch implements ata_port_operations inheritance. To allow LLDs to easily re-use their own ops tables overriding only specific methods, this patch implements poor man's class inheritance. An ops table has ->inherits field which can be set to any ops table as long as it doesn't create a loop. When the host is started, the inheritance chain is followed and any operation which isn't specified is taken from the nearest ancestor which has it specified. This operation is called finalization and done only once per an ops table and the LLD doesn't have to do anything special about it other than making the ops table non-const such that libata can update it. libata provides four base ops tables lower drivers can inherit from - base, sata, pmp, sff and bmdma. To avoid overriding these ops accidentaly, these ops are declared const and LLDs should always inherit these instead of using them directly. After finalization, all the ops table are identical before and after the patch except for setting .irq_handler to ata_interrupt in drivers which didn't use to. The .irq_handler doesn't have any actual effect and the field will soon be removed by later patch. * sata_sx4 is still using old style EH and currently doesn't take advantage of ops inheritance. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:49 -06:00
EXPORT_SYMBOL_GPL(ata_base_port_ops);
EXPORT_SYMBOL_GPL(sata_port_ops);
[PATCH] libata: implement dummy port Implement dummy port which can be requested by setting appropriate bit in probe_ent->dummy_port_mask. The dummy port is used as placeholder for stolen legacy port. This allows libata to guarantee that index_of(ap) == ap->port_no == actual_device_port_no, and thus to remove error-prone ap->hard_port_no. As it's used only when one port of a legacy controller is reserved by some other entity (e.g. IDE), the focus is on keeping the added *code* complexity at minimum, so dummy port allocates all libata core resources and acts as a normal port. It just has all dummy port_ops. This patch only implements dummy port. The following patch will make libata use it for stolen legacy ports. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-08-10 01:59:12 -06:00
EXPORT_SYMBOL_GPL(ata_dummy_port_ops);
libata: add init helpers including ata_pci_prepare_native_host() These will be used to convert LLDs to new init model. * Add irq_handler field to port_info. In new init model, requesting IRQ is LLD's responsibility and libata doesn't need to know about irq_handler. Most LLDs can simply register their irq_handler but some need different irq_handler depending on specific chip. The added port_info->irq_handler field can be used by LLDs to select the matching IRQ handler in such cases. * Add ata_dummy_port_info. * Implement ata_pci_prepare_native_host(), a helper to alloc ATA host, acquire all resources and init the host in one go. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
EXPORT_SYMBOL_GPL(ata_dummy_port_info);
libata: beef up iterators There currently are the following looping constructs. * __ata_port_for_each_link() for all available links * ata_port_for_each_link() for edge links * ata_link_for_each_dev() for all devices * ata_link_for_each_dev_reverse() for all devices in reverse order Now there's a need for looping construct which is similar to __ata_port_for_each_link() but iterates over PMP links before the host link. Instead of adding another one with long name, do the following cleanup. * Implement and export ata_link_next() and ata_dev_next() which take @mode parameter and can be used to build custom loop. * Implement ata_for_each_link() and ata_for_each_dev() which take looping mode explicitly. The following iteration modes are implemented. * ATA_LITER_EDGE : loop over edge links * ATA_LITER_HOST_FIRST : loop over all links, host link first * ATA_LITER_PMP_FIRST : loop over all links, PMP links first * ATA_DITER_ENABLED : loop over enabled devices * ATA_DITER_ENABLED_REVERSE : loop over enabled devices in reverse order * ATA_DITER_ALL : loop over all devices * ATA_DITER_ALL_REVERSE : loop over all devices in reverse order This change removes exlicit device enabledness checks from many loops and makes it clear which ones are iterated over in which direction. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-11-03 04:03:17 -07:00
EXPORT_SYMBOL_GPL(ata_link_next);
EXPORT_SYMBOL_GPL(ata_dev_next);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
EXPORT_SYMBOL_GPL(ata_std_bios_param);
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
EXPORT_SYMBOL_GPL(ata_host_init);
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
EXPORT_SYMBOL_GPL(ata_host_alloc);
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
libata: implement slave_link Explanation taken from the comment of ata_slave_link_init(). In libata, a port contains links and a link contains devices. There is single host link but if a PMP is attached to it, there can be multiple fan-out links. On SATA, there's usually a single device connected to a link but PATA and SATA controllers emulating TF based interface can have two - master and slave. However, there are a few controllers which don't fit into this abstraction too well - SATA controllers which emulate TF interface with both master and slave devices but also have separate SCR register sets for each device. These controllers need separate links for physical link handling (e.g. onlineness, link speed) but should be treated like a traditional M/S controller for everything else (e.g. command issue, softreset). slave_link is libata's way of handling this class of controllers without impacting core layer too much. For anything other than physical link handling, the default host link is used for both master and slave. For physical link handling, separate @ap->slave_link is used. All dirty details are implemented inside libata core layer. From LLD's POV, the only difference is that prereset, hardreset and postreset are called once more for the slave link, so the reset sequence looks like the following. prereset(M) -> prereset(S) -> hardreset(M) -> hardreset(S) -> softreset(M) -> postreset(M) -> postreset(S) Note that softreset is called only for the master. Softreset resets both M/S by definition, so SRST on master should handle both (the standard method will work just fine). As slave_link excludes PMP support and only code paths which deal with the attributes of physical link are affected, all the changes are localized to libata.h, libata-core.c and libata-eh.c. * ata_is_host_link() updated so that slave_link is considered as host link too. * iterator extended to iterate over the slave_link when using the underbarred version. * force param handling updated such that devno 16 is mapped to the slave link/device. * ata_link_on/offline() updated to return the combined result from master and slave link. ata_phys_link_on/offline() are the direct versions. * EH autopsy and report are performed separately for master slave links. Reset is udpated to implement the above described reset sequence. Except for reset update, most changes are minor, many of them just modifying dev->link to ata_dev_phys_link(dev) or using phys online test instead. After this update, LLDs can take full advantage of per-dev SCR registers by simply turning on slave link. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-31 02:02:43 -06:00
EXPORT_SYMBOL_GPL(ata_slave_link_init);
libata: separate out ata_host_start() Separate out ata_host_start() from ata_device_add(). ata_host_start() calls ->port_start on each port if available and freezes the port. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:06 -06:00
EXPORT_SYMBOL_GPL(ata_host_start);
libata: separate out ata_host_alloc() and ata_host_register() Reorganize ata_host_alloc() and its subroutines into the following three functions. * ata_host_alloc() : allocates host and its ports. shost is not registered automatically. * ata_scsi_add_hosts() : allocates and adds shosts associated with an ATA host. Used by ata_host_register(). * ata_host_register() : takes a fully initialized ata_host structure and registers it to libata layer and probes it. Only ata_host_alloc() and ata_host_register() are exported. ata_device_add() is rewritten using the above functions. This patch does not introduce any observable behavior change. Things worth mentioning. * print_id is assigned at registration time and LLDs are allowed to overallocate ports and reduce host->n_ports during initialization. ata_host_register() will throw away unused ports automatically. * All SCSI host initialization stuff now resides in ata_scsi_add_hosts() in libata-scsi.c, where it should be. * ipr is now the only user of ata_host_init(). Either kill it by converting ipr to use ata_host_alloc() and friends or rename and move it to libata-scsi.c Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
EXPORT_SYMBOL_GPL(ata_host_register);
libata: implement ata_host_alloc_pinfo() and ata_host_register() Implement ata_host_alloc_pinfo() and ata_host_register(). These helpers will be used in the following patches to adopt new init model. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 08:44:07 -06:00
EXPORT_SYMBOL_GPL(ata_host_activate);
libata: implement ata_host_detach() Implement ata_host_detach() which calls ata_port_detach() for each port in the host and export it. ata_port_detach() is now internal and thus un-exported. ata_host_detach() will be used as the 'deregister from libata layer' function after devres conversion. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-01-20 00:00:26 -07:00
EXPORT_SYMBOL_GPL(ata_host_detach);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
EXPORT_SYMBOL_GPL(ata_sg_init);
[PATCH] libata-eh-fw: implement new EH scheduling via error completion There are several ways a qc can get schedule for EH in new EH. This patch implements one of them - completing a qc with ATA_QCFLAG_FAILED set or with non-zero qc->err_mask. ALL such qc's are examined by EH. New EH schedules a qc for EH from completion iff ->error_handler is implemented, qc is marked as failed or qc->err_mask is non-zero and the command is not an internal command (internal cmd is handled via ->post_internal_cmd). The EH scheduling itself is performed by asking SCSI midlayer to schedule EH for the specified scmd. For drivers implementing old-EH, nothing changes. As this change makes ata_qc_complete() rather large, it's not inlined anymore and __ata_qc_complete() is exported to other parts of libata for later use. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:05 -06:00
EXPORT_SYMBOL_GPL(ata_qc_complete);
[PATCH] libata-ncq: implement ap->qc_active, ap->sactive and complete helper Add ap->qc_active and ap->sactive, mask of all active qcs and libata's view of the SActive register, respectively. Also, implement ata_qc_complete_multiple() which takes new qc_active mask and complete multiple qcs according to the mask. These will be used to track NCQ commands and complete them. The distinction between ap->qc_active and ap->sactive is also useful for later PM implementation. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:43 -06:00
EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
libata: uninline atapi_cmd_type() Uninline atapi_cmd_type(). It doesn't really have to be inline and more case will be added which need to access unexported libata variable. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-04-02 02:28:46 -06:00
EXPORT_SYMBOL_GPL(atapi_cmd_type);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
EXPORT_SYMBOL_GPL(ata_tf_to_fis);
EXPORT_SYMBOL_GPL(ata_tf_from_fis);
libata: export xfermode / PATA timing related functions Export the following xfermode related functions. * ata_pack_xfermask() * ata_unpack_xfermask() * ata_xfer_mask2mode() * ata_xfer_mode2mask() * ata_xfer_mode2shift() * ata_mode_string() * ata_id_xfermask() * ata_timing_find_mode() These functions will be used later by LLD updates. While at it, change unsigned short @speed to u8 @xfer_mode in ata_timing_find_mode() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:39 -07:00
EXPORT_SYMBOL_GPL(ata_pack_xfermask);
EXPORT_SYMBOL_GPL(ata_unpack_xfermask);
EXPORT_SYMBOL_GPL(ata_xfer_mask2mode);
EXPORT_SYMBOL_GPL(ata_xfer_mode2mask);
EXPORT_SYMBOL_GPL(ata_xfer_mode2shift);
EXPORT_SYMBOL_GPL(ata_mode_string);
EXPORT_SYMBOL_GPL(ata_id_xfermask);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
EXPORT_SYMBOL_GPL(ata_port_start);
pata: expose set_mode method so it can be wrapped This splits set_mode into do_set_mode and the wrapper so that a driver can call the standard method inside its own. This in theory also obsoletes ->post_set_mode(). Signed-off-by: Alan Cox <alan@redhat.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:52 -07:00
EXPORT_SYMBOL_GPL(ata_do_set_mode);
libata-pmp-prep: implement ops->qc_defer() Controllers which support PMP have various restrictions on which combinations of commands are allowed to what number of devices concurrently. This patch implements ops->qc_defer() which determines whether a qc can be issued at the moment or should be deferred. If the function returns ATA_DEFER_LINK, the qc will be deferred until a qc completes on the link. If ATA_DEFER_PORT, until a qc completes on any link. The defer conditions are advisory and in general ATA_DEFER_LINK can be considered as lower priority deferring than ATA_DEFER_PORT. ops->qc_defer() replaces fixed ata_scmd_need_defer(). For standard NCQ/non-NCQ exclusion, ata_std_qc_defer() is implemented. ahci and sata_sil24 are converted to use ata_std_qc_defer(). ops->qc_defer() is heavier than the original mechanism because full qc is prepped before determining to defer it, but various information is needed to determine defer conditinos and fully translating a qc is the only way to supply such information in generic manner. IMHO, this shouldn't cause any noticeable performance issues as * for most cases deferring occurs rarely (except for NCQ-aware cmd-switching PMP) * translation itself isn't that expensive * once deferred the command won't be repeated until another command completes which usually is a very long time cpu-wise. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:12 -06:00
EXPORT_SYMBOL_GPL(ata_std_qc_defer);
[PATCH] libata: Add some dummy noop functions Add some dummy noop functions for use by libata clients that do not need to do anything. Future SAS patches will utilize these functions. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-17 16:04:03 -07:00
EXPORT_SYMBOL_GPL(ata_noop_qc_prep);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
EXPORT_SYMBOL_GPL(ata_port_probe);
Add id_to_dma_mode function for printing DMA modes Also export dev_disable as this is needed by drivers doing slave decode filtering, which will follow shortly Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-20 11:01:59 -07:00
EXPORT_SYMBOL_GPL(ata_dev_disable);
[PATCH] libata: rename ata_down_sata_spd_limit() and friends Rename ata_down_sata_spd_limit() and friends to sata_down_spd_limit() and likewise for simplicity & consistency. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:23 -06:00
EXPORT_SYMBOL_GPL(sata_set_spd);
libata: separate out ata_wait_ready() and implement ata_wait_after_reset() Factor out waiting logic (which is common to all ATA controllers) from ata_sff_wait_ready() into ata_wait_ready(). ata_wait_ready() takes @check_ready function pointer and uses it to poll for readiness. This allows non-SFF controllers to use ata_wait_ready() to wait for link readiness. This patch also implements ata_wait_after_reset() - generic version of ata_sff_wait_after_reset() - using ata_wait_ready(). ata_sff_wait_ready() is reimplemented using ata_wait_ready() and ata_sff_check_ready(). Functionality remains the same. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
EXPORT_SYMBOL_GPL(ata_wait_after_reset);
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
EXPORT_SYMBOL_GPL(sata_link_debounce);
EXPORT_SYMBOL_GPL(sata_link_resume);
libata: separate out ata_std_prereset() from ata_sff_prereset() Separate out generic ATA portion from ata_sff_prereset() into ata_std_prereset() and implement ata_sff_prereset() using the std version. Waiting for device readiness is the only SFF specific part. ata_base_port_ops now has ata_std_prereset() for its prereset and ata_sff_port_ops overrides it to ata_sff_prereset(). This change can affect pdc_adma, ahci, sata_fsl and sata_sil24. pdc_adma implements its own prereset using ata_sff_prereset() and the rest has hardreset and thus are unaffected by this change. This change reflects real world situation. There is no generic way to wait for device readiness for non-SFF controllers and some of them don't have any mechanism for that. Non-sff drivers which don't have hardreset should wrap ata_std_prereset() and wait for device readiness itself but there's no such driver now and isn't likely to be popular in the future either. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:18 -06:00
EXPORT_SYMBOL_GPL(ata_std_prereset);
libata-link: linkify reset Make reset methods and related functions deal with ata_link instead of ata_port. * ata_do_reset() * ata_eh_reset() * all prereset/reset/postreset methods and related functions This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
EXPORT_SYMBOL_GPL(sata_link_hardreset);
libata: implement and use sata_std_hardreset() Implement sata_std_hardreset(), which simply wraps around sata_link_hardreset(). sata_std_hardreset() becomes new standard hardreset method for sata_port_ops and sata_sff_hardreset() moves from ata_base_port_ops to ata_sff_port_ops, which is where it really belongs. ata_is_builtin_hardreset() is added so that both ata_std_error_handler() and ata_sff_error_handler() skip both builtin hardresets if SCR isn't accessible. piix_sidpr_hardreset() in ata_piix.c is identical to sata_std_hardreset() in functionality and got replaced with the standard function. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:19 -06:00
EXPORT_SYMBOL_GPL(sata_std_hardreset);
libata: separate out ata_std_postreset() from ata_sff_postreset() Separate out generic ATA portion from ata_sff_postreset() into ata_std_postreset() and implement ata_sff_postreset() using the std version. ata_base_port_ops now has ata_std_postreset() for its postreset and ata_sff_port_ops overrides it to ata_sff_postreset(). This change affects pdc_adma, ahci, sata_fsl and sata_sil24. pdc_adma now specifies postreset to ata_sff_postreset() explicitly. sata_fsl and sata_sil24 now use ata_std_postreset() which makes no difference to them. ahci now calls ata_std_postreset() from its own postreset method, which causes no behavior difference. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-04-07 07:47:18 -06:00
EXPORT_SYMBOL_GPL(ata_std_postreset);
[libata] export ata_dev_pair; trim trailing whitespace Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-24 07:56:57 -07:00
EXPORT_SYMBOL_GPL(ata_dev_classify);
EXPORT_SYMBOL_GPL(ata_dev_pair);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
EXPORT_SYMBOL_GPL(ata_port_disable);
libata: add ata_ratelimit(), use it in AHCI driver irq handler
2005-10-05 00:58:32 -06:00
EXPORT_SYMBOL_GPL(ata_ratelimit);
[PATCH] libata: implement ata_wait_register() As waiting for some register bits to change seems to be a common operation shared by some controllers, implement helper function ata_wait_register(). This function also takes care of register write flushing. Note that the condition is inverted, the wait is over when the masked value does NOT match @val. As we're waiting for bits to change, this test is more powerful and allows the function to be used in more places. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-11 07:22:29 -06:00
EXPORT_SYMBOL_GPL(ata_wait_register);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
[PATCH] libata-hp: implement warmplug Implement warmplug. User-initiated unplug can be detected by hostt->slave_destroy() and plug by transportt->user_scan(). This patch only implements the two callbacks. The next function will hook them. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31 03:28:07 -06:00
EXPORT_SYMBOL_GPL(ata_scsi_slave_destroy);
[PATCH] libata-ncq: implement NCQ device configuration Now that all NCQ related stuff are in place, implement NCQ device configuration and bump ATA_MAX_QUEUE to 32 thus activating NCQ support. Original implementation is from Jens Axboe. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 06:03:48 -06:00
EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth);
[PATCH] libata: implement new SCR handling and port on/offline functions Implement ata_scr_{valid|read|write|write_flush}() and ata_port_{online|offline}(). These functions replace scr_{read|write}() and sata_dev_present(). Major difference between between the new SCR functions and the old ones is that the new ones have a way to signal error to the caller. This makes handling SCR-available and SCR-unavailable cases in the same path easier. Also, it eases later PM implementation where SCR access can fail due to various reasons. ata_port_{online|offline}() functions return 1 only when they are affirmitive of the condition. e.g. if SCR is unaccessible or presence cannot be determined for other reasons, these functions return 0. So, ata_port_online() != !ata_port_offline(). This distinction is useful in many exception handling cases. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:57:46 -06:00
EXPORT_SYMBOL_GPL(sata_scr_valid);
EXPORT_SYMBOL_GPL(sata_scr_read);
EXPORT_SYMBOL_GPL(sata_scr_write);
EXPORT_SYMBOL_GPL(sata_scr_write_flush);
libata-link: linkify PHY-related functions Make the following PHY-related functions to deal with ata_link instead of ata_port. * sata_print_link_status() * sata_down_spd_limit() * ata_set_sata_spd_limit() and friends * sata_link_debounce/resume() * sata_scr_valid/read/write/write_flush() * ata_link_on/offline() This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
EXPORT_SYMBOL_GPL(ata_link_online);
EXPORT_SYMBOL_GPL(ata_link_offline);
libata: add CONFIG_PM to libata core layer Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 01:32:47 -07:00
#ifdef CONFIG_PM
libata: Grand renaming. The biggest change is that ata_host_set is renamed to ata_host. * ata_host_set => ata_host * ata_probe_ent->host_flags => ata_probe_ent->port_flags * ata_probe_ent->host_set_flags => ata_probe_ent->_host_flags * ata_host_stats => ata_port_stats * ata_port->host => ata_port->scsi_host * ata_port->host_set => ata_port->host * ata_port_info->host_flags => ata_port_info->flags * ata_(.*)host_set(.*)\(\) => ata_\1host\2() The leading underscore in ata_probe_ent->_host_flags is to avoid reusing ->host_flags for different purpose. Currently, the only user of the field is libata-bmdma.c and probe_ent itself is scheduled to be removed. ata_port->host is reused for different purpose but this field is used inside libata core proper and of different type. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-24 01:19:22 -06:00
EXPORT_SYMBOL_GPL(ata_host_suspend);
EXPORT_SYMBOL_GPL(ata_host_resume);
libata: add CONFIG_PM to libata core layer Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 01:32:47 -07:00
#endif /* CONFIG_PM */
[PATCH] libata: rename ata_dev_id_[c_]string() This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12 18:02:46 -07:00
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
pata_it821x: Driver updates and reworking - Add support for the RDC 1010 variant - Rework the core library to have a read_id method. This allows the hacky bits of it821x to go and prepares us for pata_hd - Switch from WARN to BUG in ata_id_string as it will reboot if you get it wrong so WARN won't be seen - Allow the issue of command 0xFC on the 821x. This is needed to query rebuild status. - Tidy up printk formatting - Do more ident rewriting on RAID volumes to handle firmware provided ident data which is rather wonky - Report the firmware revision and device layout in RAID mode - Don't try and disable raid on the 8211 or RDC - they don't have the relevant bits Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-24 10:16:06 -06:00
EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
[libata] Export ata_pio_queue_task() so that it can be used from sata_mv. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-02-25 13:18:32 -07:00
EXPORT_SYMBOL_GPL(ata_pio_queue_task);
[PATCH] libata: add a function to decide if we need iordy This ought to be simple but for PIO2 we have to poke around the drive data to get it 100% correct. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-09 10:18:14 -07:00
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
libata: export xfermode / PATA timing related functions Export the following xfermode related functions. * ata_pack_xfermask() * ata_unpack_xfermask() * ata_xfer_mask2mode() * ata_xfer_mode2mask() * ata_xfer_mode2shift() * ata_mode_string() * ata_id_xfermask() * ata_timing_find_mode() These functions will be used later by LLD updates. While at it, change unsigned short @speed to u8 @xfer_mode in ata_timing_find_mode() for consistency. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:39 -07:00
EXPORT_SYMBOL_GPL(ata_timing_find_mode);
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
EXPORT_SYMBOL_GPL(ata_timing_compute);
EXPORT_SYMBOL_GPL(ata_timing_merge);
libata: implement ata_timing_cycle2mode() and use it in libata-acpi and pata_acpi libata-acpi is using separate timing tables for transfer modes although libata-core has the complete ata_timing table. Implement ata_timing_cycle2mode() to look for matching mode given transfer type and cycle duration and use it in libata-acpi and pata_acpi to replace private timing tables. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-12-18 00:33:05 -07:00
EXPORT_SYMBOL_GPL(ata_timing_cycle2mode);
Add ide-timing functionality to libata. This is needed for full AMD and VIA drivers and possibly more. Functions to turn actual clocking and cycle timings into register values. Also to merge shared timings to compute an optimal timing set. Built from the drivers/ide version by Vojtech Pavlik Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-21 17:01:32 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
libata: add CONFIG_PM to libata core layer Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 01:32:47 -07:00
#ifdef CONFIG_PM
[PATCH] libata: reimplement controller-wide PM Reimplement controller-wide PM. ata_host_set_suspend/resume() are defined to suspend and resume a host_set. While suspended, EHs for all ports in the host_set are pegged using ATA_FLAG_SUSPENDED and frozen. Because SCSI device hotplug is done asynchronously against the rest of libata EH and the same mutex is used when adding new device, suspend cannot wait for hotplug to complete. So, if SCSI device hotplug is in progress, suspend fails with -EBUSY. In most cases, host_set resume is followed by device resume. As each resume operation requires a reset, a single host_set-wide resume operation may result in multiple resets. To avoid this, resume waits upto 1 second giving PM to request resume for devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-07-03 01:07:27 -06:00
EXPORT_SYMBOL_GPL(ata_pci_device_do_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_do_resume);
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
EXPORT_SYMBOL_GPL(ata_pci_device_suspend);
EXPORT_SYMBOL_GPL(ata_pci_device_resume);
libata: add CONFIG_PM to libata core layer Conditionalize all PM related stuff in libata core layer using CONFIG_PM. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-02 01:32:47 -07:00
#endif /* CONFIG_PM */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#endif /* CONFIG_PCI */
[PATCH] Suspend support for libata This patch adds suspend patch to libata, and ata_piix in particular. For most low level drivers, they should just need to add the 4 hooks to work. As I can only test ata_piix, I didn't enable it for more though. Suspend support is the single most important feature on a notebook, and most new notebooks have sata drives. It's quite embarrassing that we _still_ do not support this. Right now, it's perfectly possible to suspend the drive in mid-transfer. Signed-off-by: Jens Axboe <axboe@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 01:28:07 -07:00
libata: improve EH report formatting Requiring LLDs to format multiple error description messages properly doesn't work too well. Help LLDs a bit by making ata_ehi_push_desc() insert ", " on each invocation. __ata_ehi_push_desc() is the raw version without the automatic separator. While at it, make ehi_desc interface proper functions instead of macros. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-15 23:29:39 -06:00
EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
libata: implement and use ata_port_desc() to report port configuration Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-17 22:14:55 -06:00
EXPORT_SYMBOL_GPL(ata_port_desc);
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
#endif /* CONFIG_PCI */
[PATCH] libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort() ata_port_schedule_eh() directly schedules EH for @ap without associated qc. Once EH scheduled, no further qc is allowed and EH kicks in as soon as all currently active qc's are drained. ata_port_abort() schedules all currently active commands for EH by qc_completing them with ATA_QCFLAG_FAILED set. If ata_port_abort() doesn't find any qc to abort, it directly schedule EH using ata_port_schedule_eh(). These two functions provide ways to invoke EH for conditions which aren't directly related to any specfic qc. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:07 -06:00
EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
libata-link: implement ata_link_abort() Implement ata_link_abort(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-08-06 03:36:23 -06:00
EXPORT_SYMBOL_GPL(ata_link_abort);
[PATCH] libata-eh-fw: implement ata_port_schedule_eh() and ata_port_abort() ata_port_schedule_eh() directly schedules EH for @ap without associated qc. Once EH scheduled, no further qc is allowed and EH kicks in as soon as all currently active qc's are drained. ata_port_abort() schedules all currently active commands for EH by qc_completing them with ATA_QCFLAG_FAILED set. If ata_port_abort() doesn't find any qc to abort, it directly schedule EH using ata_port_schedule_eh(). These two functions provide ways to invoke EH for conditions which aren't directly related to any specfic qc. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:07 -06:00
EXPORT_SYMBOL_GPL(ata_port_abort);
[PATCH] libata-eh-fw: implement freeze/thaw Freezing is performed atomic w.r.t. host_set->lock and once frozen LLDD is not allowed to access the port or any qc on it. Also, libata makes sure that no new qc gets issued to a frozen port. A frozen port is thawed after a reset operation completes successfully, so reset methods must do its job while the port is frozen. During initialization all ports get frozen before requesting IRQ, so reset methods are always invoked on a frozen port. Optional ->freeze and ->thaw operations notify LLDD that the port is being frozen and thawed, respectively. LLDD can disable/enable hardware interrupt in these callbacks if the controller's IRQ mask can be changed dynamically. If the controller doesn't allow such operation, LLDD can check for frozen state in the interrupt handler and ack/clear interrupts unconditionally while frozen. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:09 -06:00
EXPORT_SYMBOL_GPL(ata_port_freeze);
libata-pmp-prep: implement sata_async_notification() AN serves multiple purposes. For ATAPI, it's used for media change notification. For PMP, for downstream PHY status change notification. Implement sata_async_notification() which demultiplexes AN. To avoid unnecessary port events, ATAPI AN is not enabled if PMP is attached but SNTF is not available. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Kriten Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-09-22 22:14:13 -06:00
EXPORT_SYMBOL_GPL(sata_async_notification);
[PATCH] libata-eh-fw: implement freeze/thaw Freezing is performed atomic w.r.t. host_set->lock and once frozen LLDD is not allowed to access the port or any qc on it. Also, libata makes sure that no new qc gets issued to a frozen port. A frozen port is thawed after a reset operation completes successfully, so reset methods must do its job while the port is frozen. During initialization all ports get frozen before requesting IRQ, so reset methods are always invoked on a frozen port. Optional ->freeze and ->thaw operations notify LLDD that the port is being frozen and thawed, respectively. LLDD can disable/enable hardware interrupt in these callbacks if the controller's IRQ mask can be changed dynamically. If the controller doesn't allow such operation, LLDD can check for frozen state in the interrupt handler and ack/clear interrupts unconditionally while frozen. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:09 -06:00
EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
[PATCH] libata: separate out libata-eh.c A lot of EH codes are about to be added to libata. Separate out libata-eh.c. ata_scsi_timed_out(), ata_scsi_error(), ata_qc_timeout(), ata_eng_timeout(), ata_eh_qc_complete() and ata_eh_qc_retry() are moved. No code is changed by this patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02 03:51:53 -06:00
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
libata: export ata_eh_analyze_ncq_error Export ata_eh_analyze_ncq_error() for subsequent use by sata_mv, as suggested by Tejun. Signed-off-by: Mark Lord <mlord@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-05-02 00:14:53 -06:00
EXPORT_SYMBOL_GPL(ata_eh_analyze_ncq_error);
[PATCH] libata-eh: implement new EH Implement new EH. The exported interface is ata_do_eh() which is to be called from ->error_handler and performs the following steps to recover the failed port. ata_eh_autopsy() : analyze SError/TF, determine the cause of failure and required recovery actions and record it in ap->eh_context ata_eh_report() : report the failure to user ata_eh_recover() : perform recovery actions described in ap->eh_context ata_eh_finish() : finish failed qcs LLDDs can customize error handling by modifying eh_context before calling ata_do_eh() or, if necessary, doing so inbetween each major steps by calling each step explicitly. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15 05:58:22 -06:00
EXPORT_SYMBOL_GPL(ata_do_eh);
libata: make reset related methods proper port operations Currently reset methods are not specified directly in the ata_port_operations table. If a LLD wants to use custom reset methods, it should construct and use a error_handler which uses those reset methods. It's done this way for two reasons. First, the ops table already contained too many methods and adding four more of them would noticeably increase the amount of necessary boilerplate code all over low level drivers. Second, as ->error_handler uses those reset methods, it can get confusing. ie. By overriding ->error_handler, those reset ops can be made useless making layering a bit hazy. Now that ops table uses inheritance, the first problem doesn't exist anymore. The second isn't completely solved but is relieved by providing default values - most drivers can just override what it has implemented and don't have to concern itself about higher level callbacks. In fact, there currently is no driver which actually modifies error handling behavior. Drivers which override ->error_handler just wraps the standard error handler only to prepare the controller for EH. I don't think making ops layering strict has any noticeable benefit. This patch makes ->prereset, ->softreset, ->hardreset, ->postreset and their PMP counterparts propoer ops. Default ops are provided in the base ops tables and drivers are converted to override individual reset methods instead of creating custom error_handler. * ata_std_error_handler() doesn't use sata_std_hardreset() if SCRs aren't accessible. sata_promise doesn't need to use separate error_handlers for PATA and SATA anymore. * softreset is broken for sata_inic162x and sata_sx4. As libata now always prefers hardreset, this doesn't really matter but the ops are forced to NULL using ATA_OP_NULL for documentation purpose. * pata_hpt374 needs to use different prereset for the first and second PCI functions. This used to be done by branching from hpt374_error_handler(). The proper way to do this is to use separate ops and port_info tables for each function. Converted. Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-24 21:22:50 -06:00
EXPORT_SYMBOL_GPL(ata_std_error_handler);
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
EXPORT_SYMBOL_GPL(ata_cable_40wire);
EXPORT_SYMBOL_GPL(ata_cable_80wire);
EXPORT_SYMBOL_GPL(ata_cable_unknown);
libata: add ATA_CBL_PATA_IGN ATA_CBL_PATA_UNK indicates that the cable type can't be determined from the host side and might be either 80c or 40c. libata applies drive or other generic limit in this case. However, there are controllers where both host and drive side detections are misimplemented and the driver has to rely solely on private method - peeking BIOS or ACPI configuration or using some other private mechanism. This patch adds ATA_CBL_PATA_IGN which tells libata to ignore the cable type completely and just let the LLD determine the transfer mode via host transfer mode masks and ->mode_filter(). Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-11-27 03:43:48 -07:00
EXPORT_SYMBOL_GPL(ata_cable_ignore);
libata: cable detection fixes 2.6.21-rc has horrible problems with libata and PATA cable types (and thus speeds). This occurs because Tejun fixed a pile of other bugs and we now do cable detect enforcement for drive side detection properly. Unfortunately we don't do the process around cable detection right. Tejun identified the problem and pointed to the right Annex in the spec, this patch implements the rest of the needed changes. We add a ->cable_detect() method called after the identify sequence which allows a host to do host side detection at this point should it wish, or to modify the results of the drive side identify. This separate ->cable_detect method also cleans up a lot of code because many drivers have their own error_handler methods which really just set the cable type. If there is no ->cable_detect method the cable type is left alone so a driver setting it earlier (eg because it has the SATA flags set or because it uses the old error_handler approach) will still do the right thing (or at least the same thing) as before. This patch simply adds the cable_detect method and helpers it doesn't use them but other follow up patches will (ie Adrian please don't submit patches to unexport them ;)) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-06 03:37:56 -07:00
EXPORT_SYMBOL_GPL(ata_cable_sata);
Reference in a new issue Copy permalink