kernel-fxtec-pro1x/net/8021q/vlan_core.c

140 lines
3.4 KiB
C
Raw Normal View History

#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/if_vlan.h>
#include <linux/netpoll.h>
#include "vlan.h"
/* VLAN rx hw acceleration helper. This acts like netif_{rx,receive_skb}(). */
int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
u16 vlan_tci, int polling)
{
if (netpoll_rx(skb))
return NET_RX_DROP;
if (skb_bond_should_drop(skb, ACCESS_ONCE(skb->dev->master)))
goto drop;
bonding: allow arp_ip_targets on separate vlans to use arp validation This allows a bond device to specify an arp_ip_target as a host that is not on the same vlan as the base bond device and still use arp validation. A configuration like this, now works: BONDING_OPTS="mode=active-backup arp_interval=1000 arp_ip_target=10.0.100.1 arp_validate=3" 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever 9: bond0.100@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet 10.0.100.2/24 brd 10.0.100.255 scope global bond0.100 inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth1 MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 1000 ARP IP target/s (n.n.n.n form): 10.0.100.1 Slave Interface: eth1 MII Status: up Link Failure Count: 1 Permanent HW addr: 00:40:05:30:ff:30 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:13:21:be:33:e9 Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 03:48:58 -07:00
skb->skb_iif = skb->dev->ifindex;
__vlan_hwaccel_put_tag(skb, vlan_tci);
skb->dev = vlan_group_get_device(grp, vlan_tci & VLAN_VID_MASK);
if (!skb->dev)
goto drop;
return (polling ? netif_receive_skb(skb) : netif_rx(skb));
drop:
dev_kfree_skb_any(skb);
return NET_RX_DROP;
}
EXPORT_SYMBOL(__vlan_hwaccel_rx);
int vlan_hwaccel_do_receive(struct sk_buff *skb)
{
struct net_device *dev = skb->dev;
struct vlan_rx_stats *rx_stats;
skb->dev = vlan_dev_info(dev)->real_dev;
netif_nit_deliver(skb);
skb->dev = dev;
skb->priority = vlan_get_ingress_priority(dev, skb->vlan_tci);
skb->vlan_tci = 0;
rx_stats = per_cpu_ptr(vlan_dev_info(dev)->vlan_rx_stats,
smp_processor_id());
rx_stats->rx_packets++;
rx_stats->rx_bytes += skb->len;
switch (skb->pkt_type) {
case PACKET_BROADCAST:
break;
case PACKET_MULTICAST:
rx_stats->multicast++;
break;
case PACKET_OTHERHOST:
/* Our lower layer thinks this is not local, let's make sure.
* This allows the VLAN to have a different MAC than the
* underlying device, and still route correctly. */
if (!compare_ether_addr(eth_hdr(skb)->h_dest,
dev->dev_addr))
skb->pkt_type = PACKET_HOST;
break;
}
return 0;
}
struct net_device *vlan_dev_real_dev(const struct net_device *dev)
{
return vlan_dev_info(dev)->real_dev;
}
EXPORT_SYMBOL(vlan_dev_real_dev);
u16 vlan_dev_vlan_id(const struct net_device *dev)
{
return vlan_dev_info(dev)->vlan_id;
}
EXPORT_SYMBOL(vlan_dev_vlan_id);
static gro_result_t
vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
unsigned int vlan_tci, struct sk_buff *skb)
{
struct sk_buff *p;
if (skb_bond_should_drop(skb, ACCESS_ONCE(skb->dev->master)))
goto drop;
bonding: allow arp_ip_targets on separate vlans to use arp validation This allows a bond device to specify an arp_ip_target as a host that is not on the same vlan as the base bond device and still use arp validation. A configuration like this, now works: BONDING_OPTS="mode=active-backup arp_interval=1000 arp_ip_target=10.0.100.1 arp_validate=3" 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 3: eth0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master bond0 qlen 1000 link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff 8: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever 9: bond0.100@bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue link/ether 00:13:21:be:33:e9 brd ff:ff:ff:ff:ff:ff inet 10.0.100.2/24 brd 10.0.100.255 scope global bond0.100 inet6 fe80::213:21ff:febe:33e9/64 scope link valid_lft forever preferred_lft forever Ethernet Channel Bonding Driver: v3.6.0 (September 26, 2009) Bonding Mode: fault-tolerance (active-backup) Primary Slave: None Currently Active Slave: eth1 MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 1000 ARP IP target/s (n.n.n.n form): 10.0.100.1 Slave Interface: eth1 MII Status: up Link Failure Count: 1 Permanent HW addr: 00:40:05:30:ff:30 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:13:21:be:33:e9 Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-12-14 03:48:58 -07:00
skb->skb_iif = skb->dev->ifindex;
__vlan_hwaccel_put_tag(skb, vlan_tci);
skb->dev = vlan_group_get_device(grp, vlan_tci & VLAN_VID_MASK);
if (!skb->dev)
goto drop;
for (p = napi->gro_list; p; p = p->next) {
NAPI_GRO_CB(p)->same_flow =
p->dev == skb->dev && !compare_ether_header(
skb_mac_header(p), skb_gro_mac_header(skb));
NAPI_GRO_CB(p)->flush = 0;
}
return dev_gro_receive(napi, skb);
drop:
return GRO_DROP;
}
gro_result_t vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
unsigned int vlan_tci, struct sk_buff *skb)
{
if (netpoll_rx_on(skb))
return vlan_hwaccel_receive_skb(skb, grp, vlan_tci)
? GRO_DROP : GRO_NORMAL;
skb_gro_reset_offset(skb);
return napi_skb_finish(vlan_gro_common(napi, grp, vlan_tci, skb), skb);
}
EXPORT_SYMBOL(vlan_gro_receive);
gro_result_t vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
unsigned int vlan_tci)
{
struct sk_buff *skb = napi_frags_skb(napi);
if (!skb)
return GRO_DROP;
if (netpoll_rx_on(skb)) {
skb->protocol = eth_type_trans(skb, skb->dev);
return vlan_hwaccel_receive_skb(skb, grp, vlan_tci)
? GRO_DROP : GRO_NORMAL;
}
return napi_frags_finish(napi, skb,
vlan_gro_common(napi, grp, vlan_tci, skb));
}
EXPORT_SYMBOL(vlan_gro_frags);