2009-12-08 18:46:28 -07:00
|
|
|
/*
|
|
|
|
|
* OMAP4 clock function prototypes and macros
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2009 Texas Instruments, Inc.
|
OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation
The maximum DPLL multiplier (M) values for OMAP2xxx and OMAP3xxx are
one increment higher than they should be. See for example the
OMAP242x TRM Rev X Section 5.10.6 "Clock Generator Registers" and the
OMAP36xx TRM Rev C Table 3-202 "CM_CLKSEL1_PLL". Programming a 0 into
the DPLL's M register bitfield is valid for OMAP2/3 and indicates that
the DPLL should enter MN-bypass mode. Also, increase the minimum
multiplier (M) value for the DPLL rate rounding code from 1 to 2, to
ensure that it does not inadvertently put the DPLL into bypass.
Note that the register documentation in the OMAP2xxx and OMAP3xxx TRMs
does not make clear that the actual DPLL divider value (the "N") is
the content of the appropriate register bitfield for the N value,
_plus one_. (In other words, an N register bitfield of 0 indicates a
DPLL divider value of 1.) This is only clearly documented in the
OMAP4430 TRM, in, for example, OMAP4430 TRM Rev A Table 3-1167
"CM_CLKSEL_DPLL_USB".
While here, update copyrights, add kerneldoc for struct dpll_data,
drop the unused struct dpll_data.max_tolerance field, remove some
unnecessary #includes in DPLL-related code, and replace the #include
of <linux/module.h> with <linux/list.h>, which is what was really
needed. The OMAP4 clock autogenerator script has been updated
accordingly.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
2010-02-22 22:09:12 -07:00
|
|
|
* Copyright (C) 2010 Nokia Corporation
|
2009-12-08 18:46:28 -07:00
|
|
|
*/
|
|
|
|
|
|
OMAP3/4 clock: split into per-chip family files
clock34xx_data.c now contains data for the OMAP34xx family, the
OMAP36xx family, and the OMAP3517 family, so rename it to
clock3xxx_data.c. Rename clock34xx.c to clock3xxx.c, and move the
chip family-specific clock functions to clock34xx.c, clock36xx.c, or
clock3517.c, as appropriate. So now "clock3xxx.*" refers to the OMAP3
superset.
The main goal here is to prepare to compile chip family-specific clock
functions only for kernel builds that target that chip family. To get to
that point, we also need to add CONFIG_SOC_* options for those other
chip families; that will be done in future patches, planned for 2.6.35.
OMAP4 is also affected by this. It duplicated the OMAP3 non-CORE DPLL
clkops structure. The OMAP4 variant of this clkops structure has been
removed, and since there was nothing else currently in clock44xx.c, it
too has been removed -- it can always be added back later when there
is some content for it. (The OMAP4 clock autogeneration scripts have been
updated accordingly.)
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Ranjith Lohithakshan <ranjithl@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
2010-02-22 22:09:20 -07:00
|
|
|
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
|
|
|
|
|
#define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H
|
2009-12-08 18:46:28 -07:00
|
|
|
|
2011-10-07 00:52:58 -06:00
|
|
|
/*
|
|
|
|
|
* OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is
|
|
|
|
|
* set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM
|
|
|
|
|
* vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters")
|
|
|
|
|
*/
|
|
|
|
|
#define OMAP4430_REGM4XEN_MULT 4
|
|
|
|
|
|
2010-01-26 20:13:12 -07:00
|
|
|
int omap4xxx_clk_init(void);
|
|
|
|
|
|
2009-12-08 18:46:28 -07:00
|
|
|
#endif
|
