Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/net/atm/common.c

819 lines
20 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
/* net/atm/common.c - ATM sockets (common part for PVC and SVC) */
/* Written 1995-2000 by Werner Almesberger, EPFL LRC/ICA */
#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/net.h> /* struct socket, struct proto_ops */
#include <linux/atm.h> /* ATM stuff */
#include <linux/atmdev.h>
#include <linux/socket.h> /* SOL_SOCKET */
#include <linux/errno.h> /* error codes */
#include <linux/capability.h>
[PATCH] misc verify_area cleanups There were still a few comments left refering to verify_area, and two functions, verify_area_skas & verify_area_tt that just wrap corresponding access_ok_skas & access_ok_tt functions, just like verify_area does for access_ok - deprecate those. There was also a few places that still used verify_area in commented-out code, fix those up to use access_ok. After applying this one there should not be anything left but finally removing verify_area completely, which will happen after a kernel release or two. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 09:59:08 -06:00
#include <linux/mm.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
#include <linux/sched.h>
#include <linux/time.h> /* struct timeval */
#include <linux/skbuff.h>
#include <linux/bitops.h>
#include <linux/init.h>
#include <net/sock.h> /* struct sock */
#include <asm/uaccess.h>
#include <asm/atomic.h>
#include <asm/poll.h>
#include "resources.h" /* atm_find_dev */
#include "common.h" /* prototypes */
#include "protocols.h" /* atm_init_<transport> */
#include "addr.h" /* address registry */
#include "signaling.h" /* for WAITING and sigd_attach */
struct hlist_head vcc_hash[VCC_HTABLE_SIZE];
DEFINE_RWLOCK(vcc_sklist_lock);
static void __vcc_insert_socket(struct sock *sk)
{
struct atm_vcc *vcc = atm_sk(sk);
struct hlist_head *head = &vcc_hash[vcc->vci &
(VCC_HTABLE_SIZE - 1)];
[INET]: speedup inet (tcp/dccp) lookups Arnaldo and I agreed it could be applied now, because I have other pending patches depending on this one (Thank you Arnaldo) (The other important patch moves skc_refcnt in a separate cache line, so that the SMP/NUMA performance doesnt suffer from cache line ping pongs) 1) First some performance data : -------------------------------- tcp_v4_rcv() wastes a *lot* of time in __inet_lookup_established() The most time critical code is : sk_for_each(sk, node, &head->chain) { if (INET_MATCH(sk, acookie, saddr, daddr, ports, dif)) goto hit; /* You sunk my battleship! */ } The sk_for_each() does use prefetch() hints but only the begining of "struct sock" is prefetched. As INET_MATCH first comparison uses inet_sk(__sk)->daddr, wich is far away from the begining of "struct sock", it has to bring into CPU cache cold cache line. Each iteration has to use at least 2 cache lines. This can be problematic if some chains are very long. 2) The goal ----------- The idea I had is to change things so that INET_MATCH() may return FALSE in 99% of cases only using the data already in the CPU cache, using one cache line per iteration. 3) Description of the patch --------------------------- Adds a new 'unsigned int skc_hash' field in 'struct sock_common', filling a 32 bits hole on 64 bits platform. struct sock_common { unsigned short skc_family; volatile unsigned char skc_state; unsigned char skc_reuse; int skc_bound_dev_if; struct hlist_node skc_node; struct hlist_node skc_bind_node; atomic_t skc_refcnt; + unsigned int skc_hash; struct proto *skc_prot; }; Store in this 32 bits field the full hash, not masked by (ehash_size - 1) Using this full hash as the first comparison done in INET_MATCH permits us immediatly skip the element without touching a second cache line in case of a miss. Suppress the sk_hashent/tw_hashent fields since skc_hash (aliased to sk_hash and tw_hash) already contains the slot number if we mask with (ehash_size - 1) File include/net/inet_hashtables.h 64 bits platforms : #define INET_MATCH(__sk, __hash, __cookie, __saddr, __daddr, __ports, __dif)\ (((__sk)->sk_hash == (__hash)) ((*((__u64 *)&(inet_sk(__sk)->daddr)))== (__cookie)) && \ ((*((__u32 *)&(inet_sk(__sk)->dport))) == (__ports)) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) 32bits platforms: #define TCP_IPV4_MATCH(__sk, __hash, __cookie, __saddr, __daddr, __ports, __dif)\ (((__sk)->sk_hash == (__hash)) && \ (inet_sk(__sk)->daddr == (__saddr)) && \ (inet_sk(__sk)->rcv_saddr == (__daddr)) && \ (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif)))) - Adds a prefetch(head->chain.first) in __inet_lookup_established()/__tcp_v4_check_established() and __inet6_lookup_established()/__tcp_v6_check_established() and __dccp_v4_check_established() to bring into cache the first element of the list, before the {read|write}_lock(&head->lock); Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Acked-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 15:13:38 -06:00
sk->sk_hash = vcc->vci & (VCC_HTABLE_SIZE - 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sk_add_node(sk, head);
}
void vcc_insert_socket(struct sock *sk)
{
write_lock_irq(&vcc_sklist_lock);
__vcc_insert_socket(sk);
write_unlock_irq(&vcc_sklist_lock);
}
static void vcc_remove_socket(struct sock *sk)
{
write_lock_irq(&vcc_sklist_lock);
sk_del_node_init(sk);
write_unlock_irq(&vcc_sklist_lock);
}
static struct sk_buff *alloc_tx(struct atm_vcc *vcc,unsigned int size)
{
struct sk_buff *skb;
struct sock *sk = sk_atm(vcc);
atm: sk_wmem_alloc initial value is one commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. This broke net/atm since this protocol assumed a null initial value. This patch makes necessary changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17 20:06:12 -06:00
if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) {
[ATM]: Replace DPRINTK() with pr_debug(). Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h). Using the standard macro is cleaner and forces code to check for bad arguments and formatting. Fixes from Thomas Graf. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 16:22:09 -06:00
pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n",
atm: sk_wmem_alloc initial value is one commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. This broke net/atm since this protocol assumed a null initial value. This patch makes necessary changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17 20:06:12 -06:00
sk_wmem_alloc_get(sk), size,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
sk->sk_sndbuf);
return NULL;
}
atm: sk_wmem_alloc initial value is one commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. This broke net/atm since this protocol assumed a null initial value. This patch makes necessary changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17 20:06:12 -06:00
while (!(skb = alloc_skb(size, GFP_KERNEL)))
schedule();
pr_debug("AlTx %d += %d\n", sk_wmem_alloc_get(sk), skb->truesize);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
atomic_add(skb->truesize, &sk->sk_wmem_alloc);
return skb;
}
EXPORT_SYMBOL(vcc_hash);
EXPORT_SYMBOL(vcc_sklist_lock);
EXPORT_SYMBOL(vcc_insert_socket);
static void vcc_sock_destruct(struct sock *sk)
{
if (atomic_read(&sk->sk_rmem_alloc))
printk(KERN_DEBUG "vcc_sock_destruct: rmem leakage (%d bytes) detected.\n", atomic_read(&sk->sk_rmem_alloc));
if (atomic_read(&sk->sk_wmem_alloc))
printk(KERN_DEBUG "vcc_sock_destruct: wmem leakage (%d bytes) detected.\n", atomic_read(&sk->sk_wmem_alloc));
}
static void vcc_def_wakeup(struct sock *sk)
{
read_lock(&sk->sk_callback_lock);
net: adding memory barrier to the poll and receive callbacks Adding memory barrier after the poll_wait function, paired with receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper to wrap the memory barrier. Without the memory barrier, following race can happen. The race fires, when following code paths meet, and the tp->rcv_nxt and __add_wait_queue updates stay in CPU caches. CPU1 CPU2 sys_select receive packet ... ... __add_wait_queue update tp->rcv_nxt ... ... tp->rcv_nxt check sock_def_readable ... { schedule ... if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible(sk->sk_sleep) ... } If there was no cache the code would work ok, since the wait_queue and rcv_nxt are opposit to each other. Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already passed the tp->rcv_nxt check and sleeps, or will get the new value for tp->rcv_nxt and will return with new data mask. In both cases the process (CPU1) is being added to the wait queue, so the waitqueue_active (CPU2) call cannot miss and will wake up CPU1. The bad case is when the __add_wait_queue changes done by CPU1 stay in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then endup calling schedule and sleep forever if there are no more data on the socket. Calls to poll_wait in following modules were ommited: net/bluetooth/af_bluetooth.c net/irda/af_irda.c net/irda/irnet/irnet_ppp.c net/mac80211/rc80211_pid_debugfs.c net/phonet/socket.c net/rds/af_rds.c net/rfkill/core.c net/sunrpc/cache.c net/sunrpc/rpc_pipe.c net/tipc/socket.c Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08 06:09:13 -06:00
if (sk_has_sleeper(sk))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
wake_up(sk->sk_sleep);
read_unlock(&sk->sk_callback_lock);
}
static inline int vcc_writable(struct sock *sk)
{
struct atm_vcc *vcc = atm_sk(sk);
return (vcc->qos.txtp.max_sdu +
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
atomic_read(&sk->sk_wmem_alloc)) <= sk->sk_sndbuf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
static void vcc_write_space(struct sock *sk)
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
{
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
read_lock(&sk->sk_callback_lock);
if (vcc_writable(sk)) {
net: adding memory barrier to the poll and receive callbacks Adding memory barrier after the poll_wait function, paired with receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper to wrap the memory barrier. Without the memory barrier, following race can happen. The race fires, when following code paths meet, and the tp->rcv_nxt and __add_wait_queue updates stay in CPU caches. CPU1 CPU2 sys_select receive packet ... ... __add_wait_queue update tp->rcv_nxt ... ... tp->rcv_nxt check sock_def_readable ... { schedule ... if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible(sk->sk_sleep) ... } If there was no cache the code would work ok, since the wait_queue and rcv_nxt are opposit to each other. Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already passed the tp->rcv_nxt check and sleeps, or will get the new value for tp->rcv_nxt and will return with new data mask. In both cases the process (CPU1) is being added to the wait queue, so the waitqueue_active (CPU2) call cannot miss and will wake up CPU1. The bad case is when the __add_wait_queue changes done by CPU1 stay in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then endup calling schedule and sleep forever if there are no more data on the socket. Calls to poll_wait in following modules were ommited: net/bluetooth/af_bluetooth.c net/irda/af_irda.c net/irda/irnet/irnet_ppp.c net/mac80211/rc80211_pid_debugfs.c net/phonet/socket.c net/rds/af_rds.c net/rfkill/core.c net/sunrpc/cache.c net/sunrpc/rpc_pipe.c net/tipc/socket.c Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08 06:09:13 -06:00
if (sk_has_sleeper(sk))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
wake_up_interruptible(sk->sk_sleep);
[NET]: Name magic constants in sock_wake_async() The sock_wake_async() performs a bit different actions depending on "how" argument. Unfortunately this argument ony has numerical magic values. I propose to give names to their constants to help people reading this function callers understand what's going on without looking into this function all the time. I suppose this is 2.6.25 material, but if it's not (or the naming seems poor/bad/awful), I can rework it against the current net-2.6 tree. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-26 05:10:50 -07:00
sk_wake_async(sk, SOCK_WAKE_SPACE, POLL_OUT);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
read_unlock(&sk->sk_callback_lock);
}
static struct proto vcc_proto = {
.name = "VCC",
.owner = THIS_MODULE,
.obj_size = sizeof(struct atm_vcc),
};
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
[NET]: Make socket creation namespace safe. This patch passes in the namespace a new socket should be created in and has the socket code do the appropriate reference counting. By virtue of this all socket create methods are touched. In addition the socket create methods are modified so that they will fail if you attempt to create a socket in a non-default network namespace. Failing if we attempt to create a socket outside of the default network namespace ensures that as we incrementally make the network stack network namespace aware we will not export functionality that someone has not audited and made certain is network namespace safe. Allowing us to partially enable network namespaces before all of the exotic protocols are supported. Any protocol layers I have missed will fail to compile because I now pass an extra parameter into the socket creation code. [ Integrated AF_IUCV build fixes from Andrew Morton... -DaveM ] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-09 00:24:22 -06:00
int vcc_create(struct net *net, struct socket *sock, int protocol, int family)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct sock *sk;
struct atm_vcc *vcc;
sock->sk = NULL;
if (sock->type == SOCK_STREAM)
return -EINVAL;
[NET]: Forget the zero_it argument of sk_alloc() Finally, the zero_it argument can be completely removed from the callers and from the function prototype. Besides, fix the checkpatch.pl warnings about using the assignments inside if-s. This patch is rather big, and it is a part of the previous one. I splitted it wishing to make the patches more readable. Hope this particular split helped. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-11-01 01:39:31 -06:00
sk = sk_alloc(net, family, GFP_KERNEL, &vcc_proto);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (!sk)
return -ENOMEM;
sock_init_data(sock, sk);
sk->sk_state_change = vcc_def_wakeup;
sk->sk_write_space = vcc_write_space;
vcc = atm_sk(sk);
vcc->dev = NULL;
memset(&vcc->local,0,sizeof(struct sockaddr_atmsvc));
memset(&vcc->remote,0,sizeof(struct sockaddr_atmsvc));
vcc->qos.txtp.max_sdu = 1 << 16; /* for meta VCs */
atm: sk_wmem_alloc initial value is one commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) changed initial sk_wmem_alloc value. This broke net/atm since this protocol assumed a null initial value. This patch makes necessary changes. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17 20:06:12 -06:00
atomic_set(&sk->sk_wmem_alloc, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
atomic_set(&sk->sk_rmem_alloc, 0);
vcc->push = NULL;
vcc->pop = NULL;
vcc->push_oam = NULL;
vcc->vpi = vcc->vci = 0; /* no VCI/VPI yet */
vcc->atm_options = vcc->aal_options = 0;
sk->sk_destruct = vcc_sock_destruct;
return 0;
}
static void vcc_destroy_socket(struct sock *sk)
{
struct atm_vcc *vcc = atm_sk(sk);
struct sk_buff *skb;
set_bit(ATM_VF_CLOSE, &vcc->flags);
clear_bit(ATM_VF_READY, &vcc->flags);
if (vcc->dev) {
if (vcc->dev->ops->close)
vcc->dev->ops->close(vcc);
if (vcc->push)
vcc->push(vcc, NULL); /* atmarpd has no push */
while ((skb = skb_dequeue(&sk->sk_receive_queue)) != NULL) {
atm_return(vcc,skb->truesize);
kfree_skb(skb);
}
module_put(vcc->dev->ops->owner);
atm_dev_put(vcc->dev);
}
[ATM]: track and close listen sockets when sigd exits Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil>
2005-09-28 17:35:01 -06:00
vcc_remove_socket(sk);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
int vcc_release(struct socket *sock)
{
struct sock *sk = sock->sk;
if (sk) {
lock_sock(sk);
vcc_destroy_socket(sock->sk);
release_sock(sk);
sock_put(sk);
}
return 0;
}
void vcc_release_async(struct atm_vcc *vcc, int reply)
{
struct sock *sk = sk_atm(vcc);
set_bit(ATM_VF_CLOSE, &vcc->flags);
sk->sk_shutdown |= RCV_SHUTDOWN;
sk->sk_err = -reply;
clear_bit(ATM_VF_WAITING, &vcc->flags);
sk->sk_state_change(sk);
}
EXPORT_SYMBOL(vcc_release_async);
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-29 17:16:41 -07:00
void atm_dev_release_vccs(struct atm_dev *dev)
{
int i;
write_lock_irq(&vcc_sklist_lock);
for (i = 0; i < VCC_HTABLE_SIZE; i++) {
struct hlist_head *head = &vcc_hash[i];
struct hlist_node *node, *tmp;
struct sock *s;
struct atm_vcc *vcc;
sk_for_each_safe(s, node, tmp, head) {
vcc = atm_sk(s);
if (vcc->dev == dev) {
vcc_release_async(vcc, -EPIPE);
sk_del_node_init(s);
}
}
}
write_unlock_irq(&vcc_sklist_lock);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
static int adjust_tp(struct atm_trafprm *tp,unsigned char aal)
{
int max_sdu;
if (!tp->traffic_class) return 0;
switch (aal) {
case ATM_AAL0:
max_sdu = ATM_CELL_SIZE-1;
break;
case ATM_AAL34:
max_sdu = ATM_MAX_AAL34_PDU;
break;
default:
printk(KERN_WARNING "ATM: AAL problems ... "
"(%d)\n",aal);
/* fall through */
case ATM_AAL5:
max_sdu = ATM_MAX_AAL5_PDU;
}
if (!tp->max_sdu) tp->max_sdu = max_sdu;
else if (tp->max_sdu > max_sdu) return -EINVAL;
if (!tp->max_cdv) tp->max_cdv = ATM_MAX_CDV;
return 0;
}
atm: use const where reasonable From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 17:20:06 -06:00
static int check_ci(const struct atm_vcc *vcc, short vpi, int vci)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct hlist_head *head = &vcc_hash[vci &
(VCC_HTABLE_SIZE - 1)];
struct hlist_node *node;
struct sock *s;
struct atm_vcc *walk;
sk_for_each(s, node, head) {
walk = atm_sk(s);
if (walk->dev != vcc->dev)
continue;
if (test_bit(ATM_VF_ADDR, &walk->flags) && walk->vpi == vpi &&
walk->vci == vci && ((walk->qos.txtp.traffic_class !=
ATM_NONE && vcc->qos.txtp.traffic_class != ATM_NONE) ||
(walk->qos.rxtp.traffic_class != ATM_NONE &&
vcc->qos.rxtp.traffic_class != ATM_NONE)))
return -EADDRINUSE;
}
/* allow VCCs with same VPI/VCI iff they don't collide on
TX/RX (but we may refuse such sharing for other reasons,
e.g. if protocol requires to have both channels) */
return 0;
}
atm: use const where reasonable From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 17:20:06 -06:00
static int find_ci(const struct atm_vcc *vcc, short *vpi, int *vci)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
static short p; /* poor man's per-device cache */
static int c;
short old_p;
int old_c;
int err;
if (*vpi != ATM_VPI_ANY && *vci != ATM_VCI_ANY) {
err = check_ci(vcc, *vpi, *vci);
return err;
}
/* last scan may have left values out of bounds for current device */
if (*vpi != ATM_VPI_ANY)
p = *vpi;
else if (p >= 1 << vcc->dev->ci_range.vpi_bits)
p = 0;
if (*vci != ATM_VCI_ANY)
c = *vci;
else if (c < ATM_NOT_RSV_VCI || c >= 1 << vcc->dev->ci_range.vci_bits)
c = ATM_NOT_RSV_VCI;
old_p = p;
old_c = c;
do {
if (!check_ci(vcc, p, c)) {
*vpi = p;
*vci = c;
return 0;
}
if (*vci == ATM_VCI_ANY) {
c++;
if (c >= 1 << vcc->dev->ci_range.vci_bits)
c = ATM_NOT_RSV_VCI;
}
if ((c == ATM_NOT_RSV_VCI || *vci != ATM_VCI_ANY) &&
*vpi == ATM_VPI_ANY) {
p++;
if (p >= 1 << vcc->dev->ci_range.vpi_bits) p = 0;
}
}
while (old_p != p || old_c != c);
return -EADDRINUSE;
}
static int __vcc_connect(struct atm_vcc *vcc, struct atm_dev *dev, short vpi,
int vci)
{
struct sock *sk = sk_atm(vcc);
int error;
if ((vpi != ATM_VPI_UNSPEC && vpi != ATM_VPI_ANY &&
vpi >> dev->ci_range.vpi_bits) || (vci != ATM_VCI_UNSPEC &&
vci != ATM_VCI_ANY && vci >> dev->ci_range.vci_bits))
return -EINVAL;
if (vci > 0 && vci < ATM_NOT_RSV_VCI && !capable(CAP_NET_BIND_SERVICE))
return -EPERM;
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-29 17:16:41 -07:00
error = -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (!try_module_get(dev->ops->owner))
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-29 17:16:41 -07:00
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
vcc->dev = dev;
write_lock_irq(&vcc_sklist_lock);
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
if (test_bit(ATM_DF_REMOVED, &dev->flags) ||
[ATM]: deregistration removes device from atm_devs list immediately atm_dev_deregister() removes device from atm_dev list immediately to prevent operations on a phantom device. Decision to free device based only on ->refcnt now. Remove shutdown_atm_dev() use atm_dev_deregister() instead. atm_dev_deregister() also asynchronously releases all vccs related to device. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-29 17:16:41 -07:00
(error = find_ci(vcc, &vpi, &vci))) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
write_unlock_irq(&vcc_sklist_lock);
goto fail_module_put;
}
vcc->vpi = vpi;
vcc->vci = vci;
__vcc_insert_socket(sk);
write_unlock_irq(&vcc_sklist_lock);
switch (vcc->qos.aal) {
case ATM_AAL0:
error = atm_init_aal0(vcc);
vcc->stats = &dev->stats.aal0;
break;
case ATM_AAL34:
error = atm_init_aal34(vcc);
vcc->stats = &dev->stats.aal34;
break;
case ATM_NO_AAL:
/* ATM_AAL5 is also used in the "0 for default" case */
vcc->qos.aal = ATM_AAL5;
/* fall through */
case ATM_AAL5:
error = atm_init_aal5(vcc);
vcc->stats = &dev->stats.aal5;
break;
default:
error = -EPROTOTYPE;
}
if (!error) error = adjust_tp(&vcc->qos.txtp,vcc->qos.aal);
if (!error) error = adjust_tp(&vcc->qos.rxtp,vcc->qos.aal);
if (error)
goto fail;
[ATM]: Replace DPRINTK() with pr_debug(). Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h). Using the standard macro is cleaner and forces code to check for bad arguments and formatting. Fixes from Thomas Graf. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 16:22:09 -06:00
pr_debug("VCC %d.%d, AAL %d\n",vpi,vci,vcc->qos.aal);
pr_debug(" TX: %d, PCR %d..%d, SDU %d\n",vcc->qos.txtp.traffic_class,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
vcc->qos.txtp.min_pcr,vcc->qos.txtp.max_pcr,vcc->qos.txtp.max_sdu);
[ATM]: Replace DPRINTK() with pr_debug(). Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h). Using the standard macro is cleaner and forces code to check for bad arguments and formatting. Fixes from Thomas Graf. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 16:22:09 -06:00
pr_debug(" RX: %d, PCR %d..%d, SDU %d\n",vcc->qos.rxtp.traffic_class,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
vcc->qos.rxtp.min_pcr,vcc->qos.rxtp.max_pcr,vcc->qos.rxtp.max_sdu);
if (dev->ops->open) {
if ((error = dev->ops->open(vcc)))
goto fail;
}
return 0;
fail:
vcc_remove_socket(sk);
fail_module_put:
module_put(dev->ops->owner);
/* ensure we get dev module ref count correct */
vcc->dev = NULL;
return error;
}
int vcc_connect(struct socket *sock, int itf, short vpi, int vci)
{
struct atm_dev *dev;
struct atm_vcc *vcc = ATM_SD(sock);
int error;
[ATM]: Replace DPRINTK() with pr_debug(). Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h). Using the standard macro is cleaner and forces code to check for bad arguments and formatting. Fixes from Thomas Graf. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 16:22:09 -06:00
pr_debug("vcc_connect (vpi %d, vci %d)\n",vpi,vci);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (sock->state == SS_CONNECTED)
return -EISCONN;
if (sock->state != SS_UNCONNECTED)
return -EINVAL;
if (!(vpi || vci))
return -EINVAL;
if (vpi != ATM_VPI_UNSPEC && vci != ATM_VCI_UNSPEC)
clear_bit(ATM_VF_PARTIAL,&vcc->flags);
else
if (test_bit(ATM_VF_PARTIAL,&vcc->flags))
return -EINVAL;
[ATM]: Replace DPRINTK() with pr_debug(). Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h). Using the standard macro is cleaner and forces code to check for bad arguments and formatting. Fixes from Thomas Graf. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 16:22:09 -06:00
pr_debug("vcc_connect (TX: cl %d,bw %d-%d,sdu %d; "
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
"RX: cl %d,bw %d-%d,sdu %d,AAL %s%d)\n",
vcc->qos.txtp.traffic_class,vcc->qos.txtp.min_pcr,
vcc->qos.txtp.max_pcr,vcc->qos.txtp.max_sdu,
vcc->qos.rxtp.traffic_class,vcc->qos.rxtp.min_pcr,
vcc->qos.rxtp.max_pcr,vcc->qos.rxtp.max_sdu,
vcc->qos.aal == ATM_AAL5 ? "" : vcc->qos.aal == ATM_AAL0 ? "" :
" ??? code ",vcc->qos.aal == ATM_AAL0 ? 0 : vcc->qos.aal);
if (!test_bit(ATM_VF_HASQOS, &vcc->flags))
return -EBADFD;
if (vcc->qos.txtp.traffic_class == ATM_ANYCLASS ||
vcc->qos.rxtp.traffic_class == ATM_ANYCLASS)
return -EINVAL;
[ATM]: always return the first interface for ATM_ITF_ANY From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-29 17:13:32 -07:00
if (likely(itf != ATM_ITF_ANY)) {
[ATM]: attempt to autoload atm drivers From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-29 17:15:18 -07:00
dev = try_then_request_module(atm_dev_lookup(itf), "atm-device-%d", itf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
} else {
dev = NULL;
[NET]: sem2mutex part 2 Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 23:35:41 -07:00
mutex_lock(&atm_dev_mutex);
[ATM]: always return the first interface for ATM_ITF_ANY From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-29 17:13:32 -07:00
if (!list_empty(&atm_devs)) {
dev = list_entry(atm_devs.next, struct atm_dev, dev_list);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
atm_dev_hold(dev);
}
[NET]: sem2mutex part 2 Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 23:35:41 -07:00
mutex_unlock(&atm_dev_mutex);
[ATM]: always return the first interface for ATM_ITF_ANY From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-29 17:13:32 -07:00
}
if (!dev)
return -ENODEV;
error = __vcc_connect(vcc, dev, vpi, vci);
if (error) {
atm_dev_put(dev);
return error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
if (vpi == ATM_VPI_UNSPEC || vci == ATM_VCI_UNSPEC)
set_bit(ATM_VF_PARTIAL,&vcc->flags);
if (test_bit(ATM_VF_READY,&ATM_SD(sock)->flags))
sock->state = SS_CONNECTED;
return 0;
}
int vcc_recvmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *msg,
size_t size, int flags)
{
struct sock *sk = sock->sk;
struct atm_vcc *vcc;
struct sk_buff *skb;
int copied, error = -EINVAL;
if (sock->state != SS_CONNECTED)
return -ENOTCONN;
if (flags & ~MSG_DONTWAIT) /* only handle MSG_DONTWAIT */
return -EOPNOTSUPP;
vcc = ATM_SD(sock);
if (test_bit(ATM_VF_RELEASED,&vcc->flags) ||
test_bit(ATM_VF_CLOSE,&vcc->flags) ||
!test_bit(ATM_VF_READY, &vcc->flags))
return 0;
skb = skb_recv_datagram(sk, flags, flags & MSG_DONTWAIT, &error);
if (!skb)
return error;
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
copied = skb->len;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (copied > size) {
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
copied = size;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
msg->msg_flags |= MSG_TRUNC;
}
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
error = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
if (error)
return error;
net: Generalize socket rx gap / receive queue overflow cmsg Create a new socket level option to report number of queue overflows Recently I augmented the AF_PACKET protocol to report the number of frames lost on the socket receive queue between any two enqueued frames. This value was exported via a SOL_PACKET level cmsg. AFter I completed that work it was requested that this feature be generalized so that any datagram oriented socket could make use of this option. As such I've created this patch, It creates a new SOL_SOCKET level option called SO_RXQ_OVFL, which when enabled exports a SOL_SOCKET level cmsg that reports the nubmer of times the sk_receive_queue overflowed between any two given frames. It also augments the AF_PACKET protocol to take advantage of this new feature (as it previously did not touch sk->sk_drops, which this patch uses to record the overflow count). Tested successfully by me. Notes: 1) Unlike my previous patch, this patch simply records the sk_drops value, which is not a number of drops between packets, but rather a total number of drops. Deltas must be computed in user space. 2) While this patch currently works with datagram oriented protocols, it will also be accepted by non-datagram oriented protocols. I'm not sure if thats agreeable to everyone, but my argument in favor of doing so is that, for those protocols which aren't applicable to this option, sk_drops will always be zero, and reporting no drops on a receive queue that isn't used for those non-participating protocols seems reasonable to me. This also saves us having to code in a per-protocol opt in mechanism. 3) This applies cleanly to net-next assuming that commit 977750076d98c7ff6cbda51858bb5a5894a9d9ab (my af packet cmsg patch) is reverted Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-12 14:26:31 -06:00
sock_recv_ts_and_drops(msg, sk, skb);
[ATM]: Replace DPRINTK() with pr_debug(). Get rid of using DPRINTK macro in ATM and use pr_debug (in kernel.h). Using the standard macro is cleaner and forces code to check for bad arguments and formatting. Fixes from Thomas Graf. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-28 16:22:09 -06:00
pr_debug("RcvM %d -= %d\n", atomic_read(&sk->sk_rmem_alloc), skb->truesize);
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
atm_return(vcc, skb->truesize);
skb_free_datagram(sk, skb);
return copied;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
}
int vcc_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *m,
size_t total_len)
{
struct sock *sk = sock->sk;
DEFINE_WAIT(wait);
struct atm_vcc *vcc;
struct sk_buff *skb;
int eff,error;
const void __user *buff;
int size;
lock_sock(sk);
if (sock->state != SS_CONNECTED) {
error = -ENOTCONN;
goto out;
}
if (m->msg_name) {
error = -EISCONN;
goto out;
}
if (m->msg_iovlen != 1) {
error = -ENOSYS; /* fix this later @@@ */
goto out;
}
buff = m->msg_iov->iov_base;
size = m->msg_iov->iov_len;
vcc = ATM_SD(sock);
if (test_bit(ATM_VF_RELEASED, &vcc->flags) ||
test_bit(ATM_VF_CLOSE, &vcc->flags) ||
!test_bit(ATM_VF_READY, &vcc->flags)) {
error = -EPIPE;
send_sig(SIGPIPE, current, 0);
goto out;
}
if (!size) {
error = 0;
goto out;
}
if (size < 0 || size > vcc->qos.txtp.max_sdu) {
error = -EMSGSIZE;
goto out;
}
[PATCH] misc verify_area cleanups There were still a few comments left refering to verify_area, and two functions, verify_area_skas & verify_area_tt that just wrap corresponding access_ok_skas & access_ok_tt functions, just like verify_area does for access_ok - deprecate those. There was also a few places that still used verify_area in commented-out code, fix those up to use access_ok. After applying this one there should not be anything left but finally removing verify_area completely, which will happen after a kernel release or two. Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-01 09:59:08 -06:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
eff = (size+3) & ~3; /* align to word boundary */
prepare_to_wait(sk->sk_sleep, &wait, TASK_INTERRUPTIBLE);
error = 0;
while (!(skb = alloc_tx(vcc,eff))) {
if (m->msg_flags & MSG_DONTWAIT) {
error = -EAGAIN;
break;
}
schedule();
if (signal_pending(current)) {
error = -ERESTARTSYS;
break;
}
if (test_bit(ATM_VF_RELEASED,&vcc->flags) ||
test_bit(ATM_VF_CLOSE,&vcc->flags) ||
!test_bit(ATM_VF_READY,&vcc->flags)) {
error = -EPIPE;
send_sig(SIGPIPE, current, 0);
break;
}
prepare_to_wait(sk->sk_sleep, &wait, TASK_INTERRUPTIBLE);
}
finish_wait(sk->sk_sleep, &wait);
if (error)
goto out;
skb->dev = NULL; /* for paths shared with net_device interfaces */
ATM_SKB(skb)->atm_options = vcc->atm_options;
if (copy_from_user(skb_put(skb,size),buff,size)) {
kfree_skb(skb);
error = -EFAULT;
goto out;
}
if (eff != size) memset(skb->data+size,0,eff-size);
error = vcc->dev->ops->send(vcc,skb);
error = error ? error : size;
out:
release_sock(sk);
return error;
}
unsigned int vcc_poll(struct file *file, struct socket *sock, poll_table *wait)
{
struct sock *sk = sock->sk;
struct atm_vcc *vcc;
unsigned int mask;
net: adding memory barrier to the poll and receive callbacks Adding memory barrier after the poll_wait function, paired with receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper to wrap the memory barrier. Without the memory barrier, following race can happen. The race fires, when following code paths meet, and the tp->rcv_nxt and __add_wait_queue updates stay in CPU caches. CPU1 CPU2 sys_select receive packet ... ... __add_wait_queue update tp->rcv_nxt ... ... tp->rcv_nxt check sock_def_readable ... { schedule ... if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) wake_up_interruptible(sk->sk_sleep) ... } If there was no cache the code would work ok, since the wait_queue and rcv_nxt are opposit to each other. Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already passed the tp->rcv_nxt check and sleeps, or will get the new value for tp->rcv_nxt and will return with new data mask. In both cases the process (CPU1) is being added to the wait queue, so the waitqueue_active (CPU2) call cannot miss and will wake up CPU1. The bad case is when the __add_wait_queue changes done by CPU1 stay in its cache, and so does the tp->rcv_nxt update on CPU2 side. The CPU1 will then endup calling schedule and sleep forever if there are no more data on the socket. Calls to poll_wait in following modules were ommited: net/bluetooth/af_bluetooth.c net/irda/af_irda.c net/irda/irnet/irnet_ppp.c net/mac80211/rc80211_pid_debugfs.c net/phonet/socket.c net/rds/af_rds.c net/rfkill/core.c net/sunrpc/cache.c net/sunrpc/rpc_pipe.c net/tipc/socket.c Signed-off-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08 06:09:13 -06:00
sock_poll_wait(file, sk->sk_sleep, wait);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
mask = 0;
vcc = ATM_SD(sock);
/* exceptional events */
if (sk->sk_err)
mask = POLLERR;
if (test_bit(ATM_VF_RELEASED, &vcc->flags) ||
test_bit(ATM_VF_CLOSE, &vcc->flags))
mask |= POLLHUP;
/* readable? */
if (!skb_queue_empty(&sk->sk_receive_queue))
mask |= POLLIN | POLLRDNORM;
/* writable? */
if (sock->state == SS_CONNECTING &&
test_bit(ATM_VF_WAITING, &vcc->flags))
return mask;
if (vcc->qos.txtp.traffic_class != ATM_NONE &&
vcc_writable(sk))
mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
return mask;
}
static int atm_change_qos(struct atm_vcc *vcc,struct atm_qos *qos)
{
int error;
/*
* Don't let the QoS change the already connected AAL type nor the
* traffic class.
*/
if (qos->aal != vcc->qos.aal ||
qos->rxtp.traffic_class != vcc->qos.rxtp.traffic_class ||
qos->txtp.traffic_class != vcc->qos.txtp.traffic_class)
return -EINVAL;
error = adjust_tp(&qos->txtp,qos->aal);
if (!error) error = adjust_tp(&qos->rxtp,qos->aal);
if (error) return error;
if (!vcc->dev->ops->change_qos) return -EOPNOTSUPP;
if (sk_atm(vcc)->sk_family == AF_ATMPVC)
return vcc->dev->ops->change_qos(vcc,qos,ATM_MF_SET);
return svc_change_qos(vcc,qos);
}
atm: use const where reasonable From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 17:20:06 -06:00
static int check_tp(const struct atm_trafprm *tp)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
/* @@@ Should be merged with adjust_tp */
if (!tp->traffic_class || tp->traffic_class == ATM_ANYCLASS) return 0;
if (tp->traffic_class != ATM_UBR && !tp->min_pcr && !tp->pcr &&
!tp->max_pcr) return -EINVAL;
if (tp->min_pcr == ATM_MAX_PCR) return -EINVAL;
if (tp->min_pcr && tp->max_pcr && tp->max_pcr != ATM_MAX_PCR &&
tp->min_pcr > tp->max_pcr) return -EINVAL;
/*
* We allow pcr to be outside [min_pcr,max_pcr], because later
* adjustment may still push it in the valid range.
*/
return 0;
}
atm: use const where reasonable From: Mitchell Blank Jr <mitch@sfgoth.com> Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-06-17 17:20:06 -06:00
static int check_qos(const struct atm_qos *qos)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
int error;
if (!qos->txtp.traffic_class && !qos->rxtp.traffic_class)
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
if (qos->txtp.traffic_class != qos->rxtp.traffic_class &&
qos->txtp.traffic_class && qos->rxtp.traffic_class &&
qos->txtp.traffic_class != ATM_ANYCLASS &&
qos->rxtp.traffic_class != ATM_ANYCLASS) return -EINVAL;
error = check_tp(&qos->txtp);
if (error) return error;
return check_tp(&qos->rxtp);
}
int vcc_setsockopt(struct socket *sock, int level, int optname,
net: Make setsockopt() optlen be unsigned. This provides safety against negative optlen at the type level instead of depending upon (sometimes non-trivial) checks against this sprinkled all over the the place, in each and every implementation. Based upon work done by Arjan van de Ven and feedback from Linus Torvalds. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-30 17:12:20 -06:00
char __user *optval, unsigned int optlen)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
{
struct atm_vcc *vcc;
unsigned long value;
int error;
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
vcc = ATM_SD(sock);
switch (optname) {
case SO_ATMQOS:
{
struct atm_qos qos;
if (copy_from_user(&qos,optval,sizeof(qos)))
return -EFAULT;
error = check_qos(&qos);
if (error) return error;
if (sock->state == SS_CONNECTED)
return atm_change_qos(vcc,&qos);
if (sock->state != SS_UNCONNECTED)
return -EBADFD;
vcc->qos = qos;
set_bit(ATM_VF_HASQOS,&vcc->flags);
return 0;
}
case SO_SETCLP:
if (get_user(value,(unsigned long __user *)optval))
return -EFAULT;
if (value) vcc->atm_options |= ATM_ATMOPT_CLP;
else vcc->atm_options &= ~ATM_ATMOPT_CLP;
return 0;
default:
if (level == SOL_SOCKET) return -EINVAL;
break;
}
if (!vcc->dev || !vcc->dev->ops->setsockopt) return -EINVAL;
return vcc->dev->ops->setsockopt(vcc,level,optname,optval,optlen);
}
int vcc_getsockopt(struct socket *sock, int level, int optname,
char __user *optval, int __user *optlen)
{
struct atm_vcc *vcc;
int len;
if (get_user(len, optlen))
return -EFAULT;
if (__SO_LEVEL_MATCH(optname, level) && len != __SO_SIZE(optname))
return -EINVAL;
vcc = ATM_SD(sock);
switch (optname) {
case SO_ATMQOS:
if (!test_bit(ATM_VF_HASQOS,&vcc->flags))
return -EINVAL;
return copy_to_user(optval,&vcc->qos,sizeof(vcc->qos)) ?
-EFAULT : 0;
case SO_SETCLP:
return put_user(vcc->atm_options & ATM_ATMOPT_CLP ? 1 :
0,(unsigned long __user *)optval) ? -EFAULT : 0;
case SO_ATMPVC:
{
struct sockaddr_atmpvc pvc;
if (!vcc->dev ||
!test_bit(ATM_VF_ADDR,&vcc->flags))
return -ENOTCONN;
pvc.sap_family = AF_ATMPVC;
pvc.sap_addr.itf = vcc->dev->number;
pvc.sap_addr.vpi = vcc->vpi;
pvc.sap_addr.vci = vcc->vci;
return copy_to_user(optval,&pvc,sizeof(pvc)) ?
-EFAULT : 0;
}
default:
if (level == SOL_SOCKET) return -EINVAL;
break;
}
if (!vcc->dev || !vcc->dev->ops->getsockopt) return -EINVAL;
return vcc->dev->ops->getsockopt(vcc, level, optname, optval, len);
}
static int __init atm_init(void)
{
int error;
if ((error = proto_register(&vcc_proto, 0)) < 0)
goto out;
if ((error = atmpvc_init()) < 0) {
printk(KERN_ERR "atmpvc_init() failed with %d\n", error);
goto out_unregister_vcc_proto;
}
if ((error = atmsvc_init()) < 0) {
printk(KERN_ERR "atmsvc_init() failed with %d\n", error);
goto out_atmpvc_exit;
}
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
if ((error = atm_proc_init()) < 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
printk(KERN_ERR "atm_proc_init() failed with %d\n",error);
goto out_atmsvc_exit;
}
[NET] ATM: Fix whitespace errors. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-09 07:24:29 -07:00
if ((error = atm_sysfs_init()) < 0) {
[ATM]: basic sysfs support for ATM devices Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 13:36:34 -06:00
printk(KERN_ERR "atm_sysfs_init() failed with %d\n",error);
goto out_atmproc_exit;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
out:
return error;
[ATM]: basic sysfs support for ATM devices Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 13:36:34 -06:00
out_atmproc_exit:
atm_proc_exit();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
out_atmsvc_exit:
atmsvc_exit();
out_atmpvc_exit:
atmsvc_exit();
out_unregister_vcc_proto:
proto_unregister(&vcc_proto);
goto out;
}
static void __exit atm_exit(void)
{
atm_proc_exit();
[ATM]: basic sysfs support for ATM devices Signed-off-by: Chas Williams <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-29 13:36:34 -06:00
atm_sysfs_exit();
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
atmsvc_exit();
atmpvc_exit();
proto_unregister(&vcc_proto);
}
[ATM]: Fix for crash in adummy_init() This was reported by Ingo Molnar here, http://lkml.org/lkml/2006/12/18/119 The problem is that adummy_init() depends on atm_init() , but adummy_init() is called first. So I put atm_init() into subsys_initcall which seems appropriate, and it will still get module_init() if it becomes a module. Interesting to note that you could crash your system here if you just load the modules in the wrong order. Signed-off-by: Daniel Walker <dwalker@mvista.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-02-05 19:04:06 -07:00
subsys_initcall(atm_init);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 16:20:36 -06:00
module_exit(atm_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS_NETPROTO(PF_ATMPVC);
MODULE_ALIAS_NETPROTO(PF_ATMSVC);
Reference in a new issue Copy permalink