kernel-fxtec-pro1x/crypto/Makefile

164 lines
6.1 KiB
Makefile
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 08:07:57 -06:00
# SPDX-License-Identifier: GPL-2.0
#
# Cryptographic API
#
obj-$(CONFIG_CRYPTO) += crypto.o
crypto: crypto_memneq - add equality testing of memory regions w/o timing leaks When comparing MAC hashes, AEAD authentication tags, or other hash values in the context of authentication or integrity checking, it is important not to leak timing information to a potential attacker, i.e. when communication happens over a network. Bytewise memory comparisons (such as memcmp) are usually optimized so that they return a nonzero value as soon as a mismatch is found. E.g, on x86_64/i5 for 512 bytes this can be ~50 cyc for a full mismatch and up to ~850 cyc for a full match (cold). This early-return behavior can leak timing information as a side channel, allowing an attacker to iteratively guess the correct result. This patch adds a new method crypto_memneq ("memory not equal to each other") to the crypto API that compares memory areas of the same length in roughly "constant time" (cache misses could change the timing, but since they don't reveal information about the content of the strings being compared, they are effectively benign). Iow, best and worst case behaviour take the same amount of time to complete (in contrast to memcmp). Note that crypto_memneq (unlike memcmp) can only be used to test for equality or inequality, NOT for lexicographical order. This, however, is not an issue for its use-cases within the crypto API. We tried to locate all of the places in the crypto API where memcmp was being used for authentication or integrity checking, and convert them over to crypto_memneq. crypto_memneq is declared noinline, placed in its own source file, and compiled with optimizations that might increase code size disabled ("Os") because a smart compiler (or LTO) might notice that the return value is always compared against zero/nonzero, and might then reintroduce the same early-return optimization that we are trying to avoid. Using #pragma or __attribute__ optimization annotations of the code for disabling optimization was avoided as it seems to be considered broken or unmaintained for long time in GCC [1]. Therefore, we work around that by specifying the compile flag for memneq.o directly in the Makefile. We found that this seems to be most appropriate. As we use ("Os"), this patch also provides a loop-free "fast-path" for frequently used 16 byte digests. Similarly to kernel library string functions, leave an option for future even further optimized architecture specific assembler implementations. This was a joint work of James Yonan and Daniel Borkmann. Also thanks for feedback from Florian Weimer on this and earlier proposals [2]. [1] http://gcc.gnu.org/ml/gcc/2012-07/msg00211.html [2] https://lkml.org/lkml/2013/2/10/131 Signed-off-by: James Yonan <james@openvpn.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-09-26 02:20:39 -06:00
crypto-y := api.o cipher.o compress.o memneq.o
obj-$(CONFIG_CRYPTO_WORKQUEUE) += crypto_wq.o
obj-$(CONFIG_CRYPTO_ENGINE) += crypto_engine.o
obj-$(CONFIG_CRYPTO_FIPS) += fips.o
crypto_algapi-$(CONFIG_PROC_FS) += proc.o
crypto_algapi-y := algapi.o scatterwalk.o $(crypto_algapi-y)
obj-$(CONFIG_CRYPTO_ALGAPI2) += crypto_algapi.o
obj-$(CONFIG_CRYPTO_AEAD2) += aead.o
crypto_blkcipher-y := ablkcipher.o
crypto_blkcipher-y += blkcipher.o
crypto_blkcipher-y += skcipher.o
obj-$(CONFIG_CRYPTO_BLKCIPHER2) += crypto_blkcipher.o
obj-$(CONFIG_CRYPTO_SEQIV) += seqiv.o
obj-$(CONFIG_CRYPTO_ECHAINIV) += echainiv.o
crypto_hash-y += ahash.o
crypto_hash-y += shash.o
obj-$(CONFIG_CRYPTO_HASH2) += crypto_hash.o
obj-$(CONFIG_CRYPTO_AKCIPHER2) += akcipher.o
obj-$(CONFIG_CRYPTO_KPP2) += kpp.o
dh_generic-y := dh.o
dh_generic-y += dh_helper.o
obj-$(CONFIG_CRYPTO_DH) += dh_generic.o
$(obj)/rsapubkey.asn1.o: $(obj)/rsapubkey.asn1.c $(obj)/rsapubkey.asn1.h
$(obj)/rsaprivkey.asn1.o: $(obj)/rsaprivkey.asn1.c $(obj)/rsaprivkey.asn1.h
$(obj)/rsa_helper.o: $(obj)/rsapubkey.asn1.h $(obj)/rsaprivkey.asn1.h
rsa_generic-y := rsapubkey.asn1.o
rsa_generic-y += rsaprivkey.asn1.o
rsa_generic-y += rsa.o
rsa_generic-y += rsa_helper.o
rsa_generic-y += rsa-pkcs1pad.o
obj-$(CONFIG_CRYPTO_RSA) += rsa_generic.o
crypto_acompress-y := acompress.o
crypto_acompress-y += scompress.o
obj-$(CONFIG_CRYPTO_ACOMP2) += crypto_acompress.o
cryptomgr-y := algboss.o testmgr.o
obj-$(CONFIG_CRYPTO_MANAGER2) += cryptomgr.o
obj-$(CONFIG_CRYPTO_USER) += crypto_user.o
obj-$(CONFIG_CRYPTO_CMAC) += cmac.o
obj-$(CONFIG_CRYPTO_HMAC) += hmac.o
obj-$(CONFIG_CRYPTO_VMAC) += vmac.o
obj-$(CONFIG_CRYPTO_XCBC) += xcbc.o
obj-$(CONFIG_CRYPTO_NULL2) += crypto_null.o
obj-$(CONFIG_CRYPTO_MD4) += md4.o
obj-$(CONFIG_CRYPTO_MD5) += md5.o
obj-$(CONFIG_CRYPTO_RMD128) += rmd128.o
obj-$(CONFIG_CRYPTO_RMD160) += rmd160.o
obj-$(CONFIG_CRYPTO_RMD256) += rmd256.o
obj-$(CONFIG_CRYPTO_RMD320) += rmd320.o
obj-$(CONFIG_CRYPTO_SHA1) += sha1_generic.o
obj-$(CONFIG_CRYPTO_SHA256) += sha256_generic.o
obj-$(CONFIG_CRYPTO_SHA512) += sha512_generic.o
obj-$(CONFIG_CRYPTO_SHA3) += sha3_generic.o
obj-$(CONFIG_CRYPTO_SM3) += sm3_generic.o
obj-$(CONFIG_CRYPTO_WP512) += wp512.o
crypto: improve gcc optimization flags for serpent and wp512 An ancient gcc bug (first reported in 2003) has apparently resurfaced on MIPS, where kernelci.org reports an overly large stack frame in the whirlpool hash algorithm: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] With some testing in different configurations, I'm seeing large variations in stack frames size up to 1500 bytes for what should have around 300 bytes at most. I also checked the reference implementation, which is essentially the same code but also comes with some test and benchmarking infrastructure. It seems that recent compiler versions on at least arm, arm64 and powerpc have a partial fix for this problem, but enabling "-fsched-pressure", but even with that fix they suffer from the issue to a certain degree. Some testing on arm64 shows that the time needed to hash a given amount of data is roughly proportional to the stack frame size here, which makes sense given that the wp512 implementation is doing lots of loads for table lookups, and the problem with the overly large stack is a result of doing a lot more loads and stores for spilled registers (as seen from inspecting the object code). Disabling -fschedule-insns consistently fixes the problem for wp512, in my collection of cross-compilers, the results are consistently better or identical when comparing the stack sizes in this function, though some architectures (notable x86) have schedule-insns disabled by default. The four columns are: default: -O2 press: -O2 -fsched-pressure nopress: -O2 -fschedule-insns -fno-sched-pressure nosched: -O2 -no-schedule-insns (disables sched-pressure) default press nopress nosched alpha-linux-gcc-4.9.3 1136 848 1136 176 am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 cris-linux-gcc-4.9.3 272 272 272 272 frv-linux-gcc-4.9.3 1128 1000 1128 280 hppa64-linux-gcc-4.9.3 1128 336 1128 184 hppa-linux-gcc-4.9.3 644 308 644 276 i386-linux-gcc-4.9.3 352 352 352 352 m32r-linux-gcc-4.9.3 720 656 720 268 microblaze-linux-gcc-4.9.3 1108 604 1108 256 mips64-linux-gcc-4.9.3 1328 592 1328 208 mips-linux-gcc-4.9.3 1096 624 1096 240 powerpc64-linux-gcc-4.9.3 1088 432 1088 160 powerpc-linux-gcc-4.9.3 1080 584 1080 224 s390-linux-gcc-4.9.3 456 456 624 360 sh3-linux-gcc-4.9.3 292 292 292 292 sparc64-linux-gcc-4.9.3 992 240 992 208 sparc-linux-gcc-4.9.3 680 592 680 312 x86_64-linux-gcc-4.9.3 224 240 272 224 xtensa-linux-gcc-4.9.3 1152 704 1152 304 aarch64-linux-gcc-7.0.0 224 224 1104 208 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 mips-linux-gcc-7.0.0 1120 648 1120 272 x86_64-linux-gcc-7.0.1 240 240 304 240 arm-linux-gnueabi-gcc-4.4.7 840 392 arm-linux-gnueabi-gcc-4.5.4 784 728 784 320 arm-linux-gnueabi-gcc-4.6.4 736 728 736 304 arm-linux-gnueabi-gcc-4.7.4 944 784 944 352 arm-linux-gnueabi-gcc-4.8.5 464 464 760 352 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336 arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 Trying the same test for serpent-generic, the picture is a bit different, and while -fno-schedule-insns is generally better here than the default, -fsched-pressure wins overall, so I picked that instead. default press nopress nosched alpha-linux-gcc-4.9.3 1392 864 1392 960 am33_2.0-linux-gcc-4.9.3 536 524 536 528 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 cris-linux-gcc-4.9.3 528 528 528 528 frv-linux-gcc-4.9.3 536 400 536 504 hppa64-linux-gcc-4.9.3 524 208 524 480 hppa-linux-gcc-4.9.3 768 472 768 508 i386-linux-gcc-4.9.3 564 564 564 564 m32r-linux-gcc-4.9.3 712 576 712 532 microblaze-linux-gcc-4.9.3 724 392 724 512 mips64-linux-gcc-4.9.3 720 384 720 496 mips-linux-gcc-4.9.3 728 384 728 496 powerpc64-linux-gcc-4.9.3 704 304 704 480 powerpc-linux-gcc-4.9.3 704 296 704 480 s390-linux-gcc-4.9.3 560 560 592 536 sh3-linux-gcc-4.9.3 540 540 540 540 sparc64-linux-gcc-4.9.3 544 352 544 496 sparc-linux-gcc-4.9.3 544 344 544 496 x86_64-linux-gcc-4.9.3 528 536 576 528 xtensa-linux-gcc-4.9.3 752 544 752 544 aarch64-linux-gcc-7.0.0 432 432 656 480 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 mips-linux-gcc-7.0.0 720 464 720 488 x86_64-linux-gcc-7.0.1 536 528 600 536 arm-linux-gnueabi-gcc-4.4.7 592 440 arm-linux-gnueabi-gcc-4.5.4 776 448 776 544 arm-linux-gnueabi-gcc-4.6.4 776 448 776 544 arm-linux-gnueabi-gcc-4.7.4 768 448 768 544 arm-linux-gnueabi-gcc-4.8.5 488 488 776 544 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 arm-linux-gnueabi-gcc-5.3.1 552 552 776 536 arm-linux-gnueabi-gcc-6.1.1 560 560 776 536 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 I did not do any runtime tests with serpent, so it is possible that stack frame size does not directly correlate with runtime performance here and it actually makes things worse, but it's more likely to help here, and the reduced stack frame size is probably enough reason to apply the patch, especially given that the crypto code is often used in deep call chains. Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/ Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149 Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 15:33:23 -07:00
CFLAGS_wp512.o := $(call cc-option,-fno-schedule-insns) # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
obj-$(CONFIG_CRYPTO_TGR192) += tgr192.o
obj-$(CONFIG_CRYPTO_BLAKE2S) += blake2s_generic.o
obj-$(CONFIG_CRYPTO_GF128MUL) += gf128mul.o
obj-$(CONFIG_CRYPTO_ECB) += ecb.o
obj-$(CONFIG_CRYPTO_CBC) += cbc.o
obj-$(CONFIG_CRYPTO_CFB) += cfb.o
obj-$(CONFIG_CRYPTO_PCBC) += pcbc.o
obj-$(CONFIG_CRYPTO_CTS) += cts.o
obj-$(CONFIG_CRYPTO_LRW) += lrw.o
obj-$(CONFIG_CRYPTO_XTS) += xts.o
obj-$(CONFIG_CRYPTO_CTR) += ctr.o
obj-$(CONFIG_CRYPTO_KEYWRAP) += keywrap.o
BACKPORT, FROMGIT: crypto: adiantum - add Adiantum support Add support for the Adiantum encryption mode. Adiantum was designed by Paul Crowley and is specified by our paper: Adiantum: length-preserving encryption for entry-level processors (https://eprint.iacr.org/2018/720.pdf) See our paper for full details; this patch only provides an overview. Adiantum is a tweakable, length-preserving encryption mode designed for fast and secure disk encryption, especially on CPUs without dedicated crypto instructions. Adiantum encrypts each sector using the XChaCha12 stream cipher, two passes of an ε-almost-∆-universal (εA∆U) hash function, and an invocation of the AES-256 block cipher on a single 16-byte block. On CPUs without AES instructions, Adiantum is much faster than AES-XTS; for example, on ARM Cortex-A7, on 4096-byte sectors Adiantum encryption is about 4 times faster than AES-256-XTS encryption, and decryption about 5 times faster. Adiantum is a specialization of the more general HBSH construction. Our earlier proposal, HPolyC, was also a HBSH specialization, but it used a different εA∆U hash function, one based on Poly1305 only. Adiantum's εA∆U hash function, which is based primarily on the "NH" hash function like that used in UMAC (RFC4418), is about twice as fast as HPolyC's; consequently, Adiantum is about 20% faster than HPolyC. This speed comes with no loss of security: Adiantum is provably just as secure as HPolyC, in fact slightly *more* secure. Like HPolyC, Adiantum's security is reducible to that of XChaCha12 and AES-256, subject to a security bound. XChaCha12 itself has a security reduction to ChaCha12. Therefore, one need not "trust" Adiantum; one need only trust ChaCha12 and AES-256. Note that the εA∆U hash function is only used for its proven combinatorical properties so cannot be "broken". Adiantum is also a true wide-block encryption mode, so flipping any plaintext bit in the sector scrambles the entire ciphertext, and vice versa. No other such mode is available in the kernel currently; doing the same with XTS scrambles only 16 bytes. Adiantum also supports arbitrary-length tweaks and naturally supports any length input >= 16 bytes without needing "ciphertext stealing". For the stream cipher, Adiantum uses XChaCha12 rather than XChaCha20 in order to make encryption feasible on the widest range of devices. Although the 20-round variant is quite popular, the best known attacks on ChaCha are on only 7 rounds, so ChaCha12 still has a substantial security margin; in fact, larger than AES-256's. 12-round Salsa20 is also the eSTREAM recommendation. For the block cipher, Adiantum uses AES-256, despite it having a lower security margin than XChaCha12 and needing table lookups, due to AES's extensive adoption and analysis making it the obvious first choice. Nevertheless, for flexibility this patch also permits the "adiantum" template to be instantiated with XChaCha20 and/or with an alternate block cipher. We need Adiantum support in the kernel for use in dm-crypt and fscrypt, where currently the only other suitable options are block cipher modes such as AES-XTS. A big problem with this is that many low-end mobile devices (e.g. Android Go phones sold primarily in developing countries, as well as some smartwatches) still have CPUs that lack AES instructions, e.g. ARM Cortex-A7. Sadly, AES-XTS encryption is much too slow to be viable on these devices. We did find that some "lightweight" block ciphers are fast enough, but these suffer from problems such as not having much cryptanalysis or being too controversial. The ChaCha stream cipher has excellent performance but is insecure to use directly for disk encryption, since each sector's IV is reused each time it is overwritten. Even restricting the threat model to offline attacks only isn't enough, since modern flash storage devices don't guarantee that "overwrites" are really overwrites, due to wear-leveling. Adiantum avoids this problem by constructing a "tweakable super-pseudorandom permutation"; this is the strongest possible security model for length-preserving encryption. Of course, storing random nonces along with the ciphertext would be the ideal solution. But doing that with existing hardware and filesystems runs into major practical problems; in most cases it would require data journaling (like dm-integrity) which severely degrades performance. Thus, for now length-preserving encryption is still needed. Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit 059c2a4d8e164dccc3078e49e7f286023b019a98 https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master) Conflicts: crypto/tcrypt.c Bug: 112008522 Test: Among other things, I ran the relevant crypto self-tests: 1.) Build kernel with CONFIG_CRYPTO_MANAGER_DISABLE_TESTS *unset*, and all relevant crypto algorithms built-in, including: CONFIG_CRYPTO_ADIANTUM=y CONFIG_CRYPTO_CHACHA20=y CONFIG_CRYPTO_CHACHA20_NEON=y CONFIG_CRYPTO_NHPOLY1305=y CONFIG_CRYPTO_NHPOLY1305_NEON=y CONFIG_CRYPTO_POLY1305=y CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_ARM=y 2.) Boot and check dmesg for test failures. 3.) Instantiate "adiantum(xchacha12,aes)" and "adiantum(xchacha20,aes)" to trigger them to be tested. There are many ways to do this, but one way is to create a dm-crypt target that uses them, e.g. key=$(hexdump -n 32 -e '16/4 "%08X" 1 "\n"' /dev/urandom) dmsetup create crypt --table "0 $((1<<17)) crypt xchacha12,aes-adiantum-plain64 $key 0 /dev/vdc 0" dmsetup remove crypt dmsetup create crypt --table "0 $((1<<17)) crypt xchacha20,aes-adiantum-plain64 $key 0 /dev/vdc 0" dmsetup remove crypt 4.) Check dmesg for test failures again. 5.) Do 1-4 on both x86_64 (for basic testing) and on arm32 (for testing the ARM32-specific implementations). I did the arm32 kernel testing on Raspberry Pi 2, which is a BCM2836-based device that can run the upstream and Android common kernels. The same ARM32 assembly files for ChaCha, NHPoly1305, and AES are also included in the userspace Adiantum benchmark suite at https://github.com/google/adiantum, where they have undergone additional correctness testing. Change-Id: Ic61c13b53facfd2173065be715a7ee5f3af8760b Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:31 -07:00
obj-$(CONFIG_CRYPTO_ADIANTUM) += adiantum.o
obj-$(CONFIG_CRYPTO_NHPOLY1305) += nhpoly1305.o
obj-$(CONFIG_CRYPTO_GCM) += gcm.o
obj-$(CONFIG_CRYPTO_CCM) += ccm.o
obj-$(CONFIG_CRYPTO_CHACHA20POLY1305) += chacha20poly1305.o
obj-$(CONFIG_CRYPTO_AEGIS128) += aegis128.o
obj-$(CONFIG_CRYPTO_AEGIS128L) += aegis128l.o
obj-$(CONFIG_CRYPTO_AEGIS256) += aegis256.o
obj-$(CONFIG_CRYPTO_MORUS640) += morus640.o
obj-$(CONFIG_CRYPTO_MORUS1280) += morus1280.o
obj-$(CONFIG_CRYPTO_PCRYPT) += pcrypt.o
obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o
obj-$(CONFIG_CRYPTO_MCRYPTD) += mcryptd.o
obj-$(CONFIG_CRYPTO_DES) += des_generic.o
obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o
obj-$(CONFIG_CRYPTO_BLOWFISH) += blowfish_generic.o
obj-$(CONFIG_CRYPTO_BLOWFISH_COMMON) += blowfish_common.o
obj-$(CONFIG_CRYPTO_TWOFISH) += twofish_generic.o
obj-$(CONFIG_CRYPTO_TWOFISH_COMMON) += twofish_common.o
obj-$(CONFIG_CRYPTO_SERPENT) += serpent_generic.o
crypto: improve gcc optimization flags for serpent and wp512 An ancient gcc bug (first reported in 2003) has apparently resurfaced on MIPS, where kernelci.org reports an overly large stack frame in the whirlpool hash algorithm: crypto/wp512.c:987:1: warning: the frame size of 1112 bytes is larger than 1024 bytes [-Wframe-larger-than=] With some testing in different configurations, I'm seeing large variations in stack frames size up to 1500 bytes for what should have around 300 bytes at most. I also checked the reference implementation, which is essentially the same code but also comes with some test and benchmarking infrastructure. It seems that recent compiler versions on at least arm, arm64 and powerpc have a partial fix for this problem, but enabling "-fsched-pressure", but even with that fix they suffer from the issue to a certain degree. Some testing on arm64 shows that the time needed to hash a given amount of data is roughly proportional to the stack frame size here, which makes sense given that the wp512 implementation is doing lots of loads for table lookups, and the problem with the overly large stack is a result of doing a lot more loads and stores for spilled registers (as seen from inspecting the object code). Disabling -fschedule-insns consistently fixes the problem for wp512, in my collection of cross-compilers, the results are consistently better or identical when comparing the stack sizes in this function, though some architectures (notable x86) have schedule-insns disabled by default. The four columns are: default: -O2 press: -O2 -fsched-pressure nopress: -O2 -fschedule-insns -fno-sched-pressure nosched: -O2 -no-schedule-insns (disables sched-pressure) default press nopress nosched alpha-linux-gcc-4.9.3 1136 848 1136 176 am33_2.0-linux-gcc-4.9.3 2100 2076 2100 2104 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 cris-linux-gcc-4.9.3 272 272 272 272 frv-linux-gcc-4.9.3 1128 1000 1128 280 hppa64-linux-gcc-4.9.3 1128 336 1128 184 hppa-linux-gcc-4.9.3 644 308 644 276 i386-linux-gcc-4.9.3 352 352 352 352 m32r-linux-gcc-4.9.3 720 656 720 268 microblaze-linux-gcc-4.9.3 1108 604 1108 256 mips64-linux-gcc-4.9.3 1328 592 1328 208 mips-linux-gcc-4.9.3 1096 624 1096 240 powerpc64-linux-gcc-4.9.3 1088 432 1088 160 powerpc-linux-gcc-4.9.3 1080 584 1080 224 s390-linux-gcc-4.9.3 456 456 624 360 sh3-linux-gcc-4.9.3 292 292 292 292 sparc64-linux-gcc-4.9.3 992 240 992 208 sparc-linux-gcc-4.9.3 680 592 680 312 x86_64-linux-gcc-4.9.3 224 240 272 224 xtensa-linux-gcc-4.9.3 1152 704 1152 304 aarch64-linux-gcc-7.0.0 224 224 1104 208 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 mips-linux-gcc-7.0.0 1120 648 1120 272 x86_64-linux-gcc-7.0.1 240 240 304 240 arm-linux-gnueabi-gcc-4.4.7 840 392 arm-linux-gnueabi-gcc-4.5.4 784 728 784 320 arm-linux-gnueabi-gcc-4.6.4 736 728 736 304 arm-linux-gnueabi-gcc-4.7.4 944 784 944 352 arm-linux-gnueabi-gcc-4.8.5 464 464 760 352 arm-linux-gnueabi-gcc-4.9.3 848 848 1048 352 arm-linux-gnueabi-gcc-5.3.1 824 824 1064 336 arm-linux-gnueabi-gcc-6.1.1 808 808 1056 344 arm-linux-gnueabi-gcc-7.0.1 824 824 1048 352 Trying the same test for serpent-generic, the picture is a bit different, and while -fno-schedule-insns is generally better here than the default, -fsched-pressure wins overall, so I picked that instead. default press nopress nosched alpha-linux-gcc-4.9.3 1392 864 1392 960 am33_2.0-linux-gcc-4.9.3 536 524 536 528 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 cris-linux-gcc-4.9.3 528 528 528 528 frv-linux-gcc-4.9.3 536 400 536 504 hppa64-linux-gcc-4.9.3 524 208 524 480 hppa-linux-gcc-4.9.3 768 472 768 508 i386-linux-gcc-4.9.3 564 564 564 564 m32r-linux-gcc-4.9.3 712 576 712 532 microblaze-linux-gcc-4.9.3 724 392 724 512 mips64-linux-gcc-4.9.3 720 384 720 496 mips-linux-gcc-4.9.3 728 384 728 496 powerpc64-linux-gcc-4.9.3 704 304 704 480 powerpc-linux-gcc-4.9.3 704 296 704 480 s390-linux-gcc-4.9.3 560 560 592 536 sh3-linux-gcc-4.9.3 540 540 540 540 sparc64-linux-gcc-4.9.3 544 352 544 496 sparc-linux-gcc-4.9.3 544 344 544 496 x86_64-linux-gcc-4.9.3 528 536 576 528 xtensa-linux-gcc-4.9.3 752 544 752 544 aarch64-linux-gcc-7.0.0 432 432 656 480 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 mips-linux-gcc-7.0.0 720 464 720 488 x86_64-linux-gcc-7.0.1 536 528 600 536 arm-linux-gnueabi-gcc-4.4.7 592 440 arm-linux-gnueabi-gcc-4.5.4 776 448 776 544 arm-linux-gnueabi-gcc-4.6.4 776 448 776 544 arm-linux-gnueabi-gcc-4.7.4 768 448 768 544 arm-linux-gnueabi-gcc-4.8.5 488 488 776 544 arm-linux-gnueabi-gcc-4.9.3 552 552 776 536 arm-linux-gnueabi-gcc-5.3.1 552 552 776 536 arm-linux-gnueabi-gcc-6.1.1 560 560 776 536 arm-linux-gnueabi-gcc-7.0.1 616 616 808 536 I did not do any runtime tests with serpent, so it is possible that stack frame size does not directly correlate with runtime performance here and it actually makes things worse, but it's more likely to help here, and the reduced stack frame size is probably enough reason to apply the patch, especially given that the crypto code is often used in deep call chains. Link: https://kernelci.org/build/id/58797d7559b5149efdf6c3a9/logs/ Link: http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=11488 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149 Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-03 15:33:23 -07:00
CFLAGS_serpent_generic.o := $(call cc-option,-fsched-pressure) # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=79149
obj-$(CONFIG_CRYPTO_AES) += aes_generic.o
CFLAGS_aes_generic.o := $(call cc-option,-fno-code-hoisting) # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=83356
obj-$(CONFIG_CRYPTO_SM4) += sm4_generic.o
obj-$(CONFIG_CRYPTO_AES_TI) += aes_ti.o
obj-$(CONFIG_CRYPTO_CAMELLIA) += camellia_generic.o
obj-$(CONFIG_CRYPTO_CAST_COMMON) += cast_common.o
obj-$(CONFIG_CRYPTO_CAST5) += cast5_generic.o
obj-$(CONFIG_CRYPTO_CAST6) += cast6_generic.o
obj-$(CONFIG_CRYPTO_ARC4) += arc4.o
obj-$(CONFIG_CRYPTO_TEA) += tea.o
obj-$(CONFIG_CRYPTO_KHAZAD) += khazad.o
obj-$(CONFIG_CRYPTO_ANUBIS) += anubis.o
obj-$(CONFIG_CRYPTO_SEED) += seed.o
obj-$(CONFIG_CRYPTO_SALSA20) += salsa20_generic.o
BACKPORT, FROMGIT: crypto: chacha20-generic - refactor to allow varying number of rounds In preparation for adding XChaCha12 support, rename/refactor chacha20-generic to support different numbers of rounds. The justification for needing XChaCha12 support is explained in more detail in the patch "crypto: chacha - add XChaCha12 support". The only difference between ChaCha{8,12,20} are the number of rounds itself; all other parts of the algorithm are the same. Therefore, remove the "20" from all definitions, structures, functions, files, etc. that will be shared by all ChaCha versions. Also make ->setkey() store the round count in the chacha_ctx (previously chacha20_ctx). The generic code then passes the round count through to chacha_block(). There will be a ->setkey() function for each explicitly allowed round count; the encrypt/decrypt functions will be the same. I decided not to do it the opposite way (same ->setkey() function for all round counts, with different encrypt/decrypt functions) because that would have required more boilerplate code in architecture-specific implementations of ChaCha and XChaCha. Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Martin Willi <martin@strongswan.org> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> (cherry picked from commit 1ca1b917940c24ca3d1f490118c5474168622953 https://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master) Conflicts: arch/x86/crypto/chacha20_glue.c drivers/crypto/caam/caamalg.c drivers/crypto/caam/caamalg_qi2.c drivers/crypto/caam/compat.h include/crypto/chacha20.h Bug: 112008522 Test: As series, see Ic61c13b53facfd2173065be715a7ee5f3af8760b Change-Id: I7fa203ddc7095ce8675a32f49b8a5230cd0cf5f6 Signed-off-by: Eric Biggers <ebiggers@google.com>
2018-11-16 18:26:21 -07:00
obj-$(CONFIG_CRYPTO_CHACHA20) += chacha_generic.o
obj-$(CONFIG_CRYPTO_POLY1305) += poly1305_generic.o
obj-$(CONFIG_CRYPTO_DEFLATE) += deflate.o
obj-$(CONFIG_CRYPTO_MICHAEL_MIC) += michael_mic.o
obj-$(CONFIG_CRYPTO_CRC32C) += crc32c_generic.o
obj-$(CONFIG_CRYPTO_CRC32) += crc32_generic.o
obj-$(CONFIG_CRYPTO_CRCT10DIF) += crct10dif_common.o crct10dif_generic.o
obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o
obj-$(CONFIG_CRYPTO_LZO) += lzo.o
obj-$(CONFIG_CRYPTO_LZ4) += lz4.o
obj-$(CONFIG_CRYPTO_LZ4HC) += lz4hc.o
obj-$(CONFIG_CRYPTO_842) += 842.o
obj-$(CONFIG_CRYPTO_RNG2) += rng.o
obj-$(CONFIG_CRYPTO_ANSI_CPRNG) += ansi_cprng.o
obj-$(CONFIG_CRYPTO_DRBG) += drbg.o
obj-$(CONFIG_CRYPTO_JITTERENTROPY) += jitterentropy_rng.o
CFLAGS_jitterentropy.o = -O0
jitterentropy_rng-y := jitterentropy.o jitterentropy-kcapi.o
obj-$(CONFIG_CRYPTO_TEST) += tcrypt.o
obj-$(CONFIG_CRYPTO_GHASH) += ghash-generic.o
obj-$(CONFIG_CRYPTO_USER_API) += af_alg.o
obj-$(CONFIG_CRYPTO_USER_API_HASH) += algif_hash.o
obj-$(CONFIG_CRYPTO_USER_API_SKCIPHER) += algif_skcipher.o
obj-$(CONFIG_CRYPTO_USER_API_RNG) += algif_rng.o
obj-$(CONFIG_CRYPTO_USER_API_AEAD) += algif_aead.o
obj-$(CONFIG_CRYPTO_ZSTD) += zstd.o
ecdh_generic-y := ecc.o
ecdh_generic-y += ecdh.o
ecdh_generic-y += ecdh_helper.o
obj-$(CONFIG_CRYPTO_ECDH) += ecdh_generic.o
obj-$(CONFIG_CRYPTO_CURVE25519) += curve25519-generic.o
#
# generic algorithms and the async_tx api
#
obj-$(CONFIG_XOR_BLOCKS) += xor.o
async_tx: add the async_tx api The async_tx api provides methods for describing a chain of asynchronous bulk memory transfers/transforms with support for inter-transactional dependencies. It is implemented as a dmaengine client that smooths over the details of different hardware offload engine implementations. Code that is written to the api can optimize for asynchronous operation and the api will fit the chain of operations to the available offload resources. I imagine that any piece of ADMA hardware would register with the 'async_*' subsystem, and a call to async_X would be routed as appropriate, or be run in-line. - Neil Brown async_tx exploits the capabilities of struct dma_async_tx_descriptor to provide an api of the following general format: struct dma_async_tx_descriptor * async_<operation>(..., struct dma_async_tx_descriptor *depend_tx, dma_async_tx_callback cb_fn, void *cb_param) { struct dma_chan *chan = async_tx_find_channel(depend_tx, <operation>); struct dma_device *device = chan ? chan->device : NULL; int int_en = cb_fn ? 1 : 0; struct dma_async_tx_descriptor *tx = device ? device->device_prep_dma_<operation>(chan, len, int_en) : NULL; if (tx) { /* run <operation> asynchronously */ ... tx->tx_set_dest(addr, tx, index); ... tx->tx_set_src(addr, tx, index); ... async_tx_submit(chan, tx, flags, depend_tx, cb_fn, cb_param); } else { /* run <operation> synchronously */ ... <operation> ... async_tx_sync_epilog(flags, depend_tx, cb_fn, cb_param); } return tx; } async_tx_find_channel() returns a capable channel from its pool. The channel pool is organized as a per-cpu array of channel pointers. The async_tx_rebalance() routine is tasked with managing these arrays. In the uniprocessor case async_tx_rebalance() tries to spread responsibility evenly over channels of similar capabilities. For example if there are two copy+xor channels, one will handle copy operations and the other will handle xor. In the SMP case async_tx_rebalance() attempts to spread the operations evenly over the cpus, e.g. cpu0 gets copy channel0 and xor channel0 while cpu1 gets copy channel 1 and xor channel 1. When a dependency is specified async_tx_find_channel defaults to keeping the operation on the same channel. A xor->copy->xor chain will stay on one channel if it supports both operation types, otherwise the transaction will transition between a copy and a xor resource. Currently the raid5 implementation in the MD raid456 driver has been converted to the async_tx api. A driver for the offload engines on the Intel Xscale series of I/O processors, iop-adma, is provided in a later commit. With the iop-adma driver and async_tx, raid456 is able to offload copy, xor, and xor-zero-sum operations to hardware engines. On iop342 tiobench showed higher throughput for sequential writes (20 - 30% improvement) and sequential reads to a degraded array (40 - 55% improvement). For the other cases performance was roughly equal, +/- a few percentage points. On a x86-smp platform the performance of the async_tx implementation (in synchronous mode) was also +/- a few percentage points of the original implementation. According to 'top' on iop342 CPU utilization drops from ~50% to ~15% during a 'resync' while the speed according to /proc/mdstat doubles from ~25 MB/s to ~50 MB/s. The tiobench command line used for testing was: tiobench --size 2048 --block 4096 --block 131072 --dir /mnt/raid --numruns 5 * iop342 had 1GB of memory available Details: * if CONFIG_DMA_ENGINE=n the asynchronous path is compiled away by making async_tx_find_channel a static inline routine that always returns NULL * when a callback is specified for a given transaction an interrupt will fire at operation completion time and the callback will occur in a tasklet. if the the channel does not support interrupts then a live polling wait will be performed * the api is written as a dmaengine client that requests all available channels * In support of dependencies the api implicitly schedules channel-switch interrupts. The interrupt triggers the cleanup tasklet which causes pending operations to be scheduled on the next channel * Xor engines treat an xor destination address differently than a software xor routine. To the software routine the destination address is an implied source, whereas engines treat it as a write-only destination. This patch modifies the xor_blocks routine to take a an explicit destination address to mirror the hardware. Changelog: * fixed a leftover debug print * don't allow callbacks in async_interrupt_cond * fixed xor_block changes * fixed usage of ASYNC_TX_XOR_DROP_DEST * drop dma mapping methods, suggested by Chris Leech * printk warning fixups from Andrew Morton * don't use inline in C files, Adrian Bunk * select the API when MD is enabled * BUG_ON xor source counts <= 1 * implicitly handle hardware concerns like channel switching and interrupts, Neil Brown * remove the per operation type list, and distribute operation capabilities evenly amongst the available channels * simplify async_tx_find_channel to optimize the fast path * introduce the channel_table_initialized flag to prevent early calls to the api * reorganize the code to mimic crypto * include mm.h as not all archs include it in dma-mapping.h * make the Kconfig options non-user visible, Adrian Bunk * move async_tx under crypto since it is meant as 'core' functionality, and the two may share algorithms in the future * move large inline functions into c files * checkpatch.pl fixes * gpl v2 only correction Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Acked-By: NeilBrown <neilb@suse.de>
2007-01-02 11:10:44 -07:00
obj-$(CONFIG_ASYNC_CORE) += async_tx/
obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys/
obj-$(CONFIG_CRYPTO_HASH_INFO) += hash_info.o
crypto_simd-y := simd.o
obj-$(CONFIG_CRYPTO_SIMD) += crypto_simd.o